Complete TPI protocol code to enter and exit TPI programming mode for the ATTINY...

diff --git a/Projects/AVRISP/Lib/XPROG/TINYNVM.c b/Projects/AVRISP/Lib/XPROG/TINYNVM.c
index 5eb5989..f4b90ff 100644 (file)
--- a/Projects/AVRISP/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP/Lib/XPROG/TINYNVM.c
@@ -38,44 +38,35 @@
 \r
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)\r
 \r
 \r
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)\r
 \r

-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC\r
- *  calculation.\r
+/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.\r

  *\r
  *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise\r
  */\r
  *\r
  *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise\r
  */\r

-bool XMEGANVM_WaitWhileNVMBusBusy(void)\r
+bool TINYNVM_WaitWhileNVMBusBusy(void)\r

 {\r
 {\r

-       // TODO\r
+       TCNT0 = 0;\r
+       TIFR0 = (1 << OCF1A);\r
+                       \r
+       uint8_t TimeoutMS = TINY_NVM_BUSY_TIMEOUT_MS;\r

        \r
        \r

-       return false;\r
-}\r
+       /* Poll the STATUS register to check to see if NVM access has been enabled */\r
+       while (TimeoutMS)\r
+       {\r
+               /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */\r
+               XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);\r
+               if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)\r
+                 return true;\r

 \r
 \r

-/** Waits while the target's NVM controller is busy performing an operation, exiting if the\r
- *  timeout period expires.\r
- *\r
- *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise\r
- */\r
-bool XMEGANVM_WaitWhileNVMControllerBusy(void)\r
-{\r
-       // TODO\r
+               if (TIFR0 & (1 << OCF1A))\r
+               {\r
+                       TIFR0 = (1 << OCF1A);\r
+                       TimeoutMS--;\r
+               }\r
+       }\r

        \r
        return false;\r
 }\r
 \r
        \r
        return false;\r
 }\r
 \r

-/** Retrieves the CRC value of the given memory space.\r
- *\r
- *  \param[in]  CRCCommand  NVM CRC command to issue to the target\r
- *  \param[out] CRCDest     CRC Destination when read from the target\r
- *\r
- *  \return Boolean true if the command sequence complete successfully\r
- */\r
-bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)\r
-{\r
-       // TODO\r
-\r
-       return true;\r
-}\r
-\r

 /** Reads memory from the target's memory spaces.\r
  *\r
  *  \param[in]  ReadAddress  Start address to read from within the target's address space\r
 /** Reads memory from the target's memory spaces.\r
  *\r
  *  \param[in]  ReadAddress  Start address to read from within the target's address space\r


@@ -84,7 +75,7 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r

-bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)\r
+bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)\r

 {\r
        // TODO\r
        \r
 {\r
        // TODO\r
        \r


@@ -99,7 +90,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r

-bool XMEGANVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)\r
+bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)\r

 {\r
        // TODO\r
        \r
 {\r
        // TODO\r
        \r


@@ -113,7 +104,7 @@ bool XMEGANVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddres
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r

-bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)\r
+bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)\r

 {\r
        // TODO\r
        \r
 {\r
        // TODO\r
        \r

diff --git a/Projects/AVRISP/Lib/XPROG/TINYNVM.h b/Projects/AVRISP/Lib/XPROG/TINYNVM.h
index 11d4efc..ecf429e 100644 (file)
--- a/Projects/AVRISP/Lib/XPROG/TINYNVM.h
+++ b/Projects/AVRISP/Lib/XPROG/TINYNVM.h
@@ -59,10 +59,9 @@
                #define TINY_NVM_BUSY_TIMEOUT_MS       100\r
 \r
        /* Function Prototypes: */\r
                #define TINY_NVM_BUSY_TIMEOUT_MS       100\r
 \r
        /* Function Prototypes: */\r

-               bool TINYNVM_WaitWhileNVMControllerBusy(void);\r
+               bool TINYNVM_WaitWhileNVMBusBusy(void);\r

                bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);\r
                bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer);\r
                bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);\r
                bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);\r
                bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer);\r
                bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);\r

-               bool TINYNVM_WaitWhileNVMBusBusy(void);\r

 \r
 #endif\r
 \r
 #endif\r

diff --git a/Projects/AVRISP/Lib/XPROG/XMEGANVM.h b/Projects/AVRISP/Lib/XPROG/XMEGANVM.h
index 10049f4..6a4de1f 100644 (file)
--- a/Projects/AVRISP/Lib/XPROG/XMEGANVM.h
+++ b/Projects/AVRISP/Lib/XPROG/XMEGANVM.h
@@ -108,6 +108,7 @@
        /* Function Prototypes: */\r
                void XMEGANVM_SendNVMRegAddress(const uint8_t Register);\r
                void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);\r
        /* Function Prototypes: */\r
                void XMEGANVM_SendNVMRegAddress(const uint8_t Register);\r
                void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);\r

+               bool XMEGANVM_WaitWhileNVMBusBusy(void);\r

                bool XMEGANVM_WaitWhileNVMControllerBusy(void);\r
                bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest);\r
                bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);\r
                bool XMEGANVM_WaitWhileNVMControllerBusy(void);\r
                bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest);\r
                bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);\r


@@ -116,6 +117,5 @@
                                              const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,\r
                                              const uint8_t* WriteBuffer, const uint16_t WriteSize);\r
                bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);\r
                                              const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,\r
                                              const uint8_t* WriteBuffer, const uint16_t WriteSize);\r
                bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);\r

-               bool XMEGANVM_WaitWhileNVMBusBusy(void);\r

 \r
 #endif\r
 \r
 #endif\r

diff --git a/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c
index f83561c..edcc874 100644 (file)
--- a/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP/Lib/XPROG/XPROGProtocol.c
@@ -132,7 +132,13 @@ static void XPROGProtocol_EnterXPROGMode(void)
                /* Enable TPI programming mode with the attached target */\r
                XPROGTarget_EnableTargetTPI();\r
                \r
                /* Enable TPI programming mode with the attached target */\r
                XPROGTarget_EnableTargetTPI();\r
                \r

-               // TODO - enable NVM bus via KEY                \r
+               /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */\r
+               XPROGTarget_SendByte(TPI_CMD_SKEY);     \r
+               for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)\r
+                 XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);\r
+\r
+               /* Wait until the NVM bus becomes active */\r
+               NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();\r

        }\r
        \r
        Endpoint_Write_Byte(CMD_XPROG);\r
        }\r
        \r
        Endpoint_Write_Byte(CMD_XPROG);\r


@@ -159,7 +165,9 @@ static void XPROGProtocol_LeaveXPROGMode(void)
        }\r
        else\r
        {\r
        }\r
        else\r
        {\r

-               // TODO - Disable TPI via register\r
+               /* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */\r
+               XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);     \r
+               XPROGTarget_SendByte(0x00);\r

        \r
                XPROGTarget_DisableTargetTPI();\r
        }\r
        \r
                XPROGTarget_DisableTargetTPI();\r
        }\r