Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure...

Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.

Makefile whitespace fixes.

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 494381e..44667b3 100644 (file)
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -54,7 +54,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index 094328e..1693300 100644 (file)
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -54,7 +54,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.

diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 86f34e6..470f832 100644 (file)
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index e1b0dd8..8f2978b 100644 (file)
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -525,7 +525,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -536,7 +536,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index da7c7ca..e270575 100644 (file)
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index 8109121..b2a80ea 100644 (file)
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 40ace20..37431cd 100644 (file)
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index b392752..9fe72e2 100644 (file)
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index b7dbd1f..115759e 100644 (file)
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 038f044..e6aec7e 100644 (file)
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index 390adae..6ec34ec 100644 (file)
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 154c3e1..bc1b9ce 100644 (file)
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index c7cb09a..306f2e6 100644 (file)
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 5922688..758a77f 100644 (file)
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -540,7 +540,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -551,7 +551,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 52a8cce..d40208c 100644 (file)
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 240628d..7e2bd6d 100644 (file)
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index f62ffc7..288188a 100644 (file)
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -527,7 +527,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -538,7 +538,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile
index c7f41eb..7b2a5b1 100644 (file)
--- a/Demos/Device/Incomplete/TestAndMeasurement/makefile
+++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 86bc094..3e4273a 100644 (file)
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index bf189c3..86bb0b7 100644 (file)
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index fbd5d45..40b5a2c 100644 (file)
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9fa56a5..be6da3c 100644 (file)
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index 553a89a..49697f7 100644 (file)
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index a7fcdbb..3794c50 100644 (file)
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index d593298..dcd70e0 100644 (file)
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 784709d..45a8c06 100644 (file)
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index 9f740fb..b55334b 100644 (file)
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index af82d9a..99467e7 100644 (file)
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 0bb8847..ed17d36 100644 (file)
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -541,7 +541,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index dacd22e..89ad42c 100644 (file)
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
index 9106172..4dd8f9f 100644 (file)
--- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
index 44b3484..fb7ceec 100644 (file)
--- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile
index d3765b6..fb6c110 100644 (file)
--- a/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
index 4c26502..172137b 100644 (file)
--- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile
index dfeabfb..dc5811f 100644 (file)
--- a/Demos/Host/ClassDriver/MIDIHost/makefile
+++ b/Demos/Host/ClassDriver/MIDIHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile
index 4b33cb3..f63a448 100644 (file)
--- a/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ b/Demos/Host/ClassDriver/MassStorageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index 16e79ea..5bd6b12 100644 (file)
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index c409796..6ef2846 100644 (file)
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile
index a4fa937..d0da5af 100644 (file)
--- a/Demos/Host/ClassDriver/PrinterHost/makefile
+++ b/Demos/Host/ClassDriver/PrinterHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
index 2b33d17..f01f2f9 100644 (file)
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile
index 4069d91..203e2cd 100644 (file)
--- a/Demos/Host/ClassDriver/StillImageHost/makefile
+++ b/Demos/Host/ClassDriver/StillImageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
index 27f813b..47e9da1 100644 (file)
--- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index c65cd0f..9dc804a 100644 (file)
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -529,7 +529,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -540,7 +540,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index 1541d5a..d82d518 100644 (file)
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
index 3f00103..c44e69c 100644 (file)
--- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index 866d212..b9d9f24 100644 (file)
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index 83abe71..64516d4 100644 (file)
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile
index eb040d0..3d73698 100644 (file)
--- a/Demos/Host/LowLevel/MIDIHost/makefile
+++ b/Demos/Host/LowLevel/MIDIHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index f96868d..220d71d 100644 (file)
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index b71f82e..e7df964 100644 (file)
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index ffe5f12..5fd2f9c 100644 (file)
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index 65c7ff8..93bb4ad 100644 (file)
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
index 3e899b3..87b65f0 100644 (file)
--- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index bd6ee27..72d7707 100644 (file)
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 584612d..935391a 100644 (file)
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/LUFA/CodeTemplates/makefile_template b/LUFA/CodeTemplates/makefile_template
index a1176a4..c10bcf9 100644 (file)
--- a/LUFA/CodeTemplates/makefile_template
+++ b/LUFA/CodeTemplates/makefile_template
@@ -66,7 +66,7 @@ MCU = ### INSERT NAME OF MICROCONTROLLER MODEL HERE ###
 # Target board (see library "Board Types" documentation, NONE for projects not requiring\r
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called \r
 # "Board" inside the application directory.\r
-BOARD  = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ###\r
+BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ###\r
 \r
 \r
 # Processor frequency.\r
@@ -516,7 +516,7 @@ flip: $(TARGET).hex
 \r
 dfu: $(TARGET).hex\r
        dfu-programmer $(MCU) erase\r
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex\r
        dfu-programmer $(MCU) reset\r
 \r
 flip-ee: $(TARGET).hex $(TARGET).eep\r
@@ -527,7 +527,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex\r
 \r
 dfu-ee: $(TARGET).hex $(TARGET).eep\r
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
        dfu-programmer $(MCU) reset\r
 \r
 \r

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 24dd943..132aa48 100644 (file)
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -42,6 +42,8 @@
   *    to free up the Start of Frame flag for interrupt use in the user application
   *  - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
   *  - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode now defaults to UID selection mode
+  *  - Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's
+  *    flash memory are ignored (thanks to Axel Rohde)
   *
   *  <b>Fixed:</b>
   *  - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
@@ -59,6 +61,7 @@
   *  - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
   *  - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
   *  - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
+  *  - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
   *
   *  \section Sec_ChangeLog100807 Version 100807
   *  <b>New:</b>

diff --git a/LUFA/ManPages/WritingBoardDrivers.txt b/LUFA/ManPages/WritingBoardDrivers.txt
index c3371a9..dd0ea47 100644 (file)
--- a/LUFA/ManPages/WritingBoardDrivers.txt
+++ b/LUFA/ManPages/WritingBoardDrivers.txt
@@ -18,9 +18,9 @@
  *  with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates
  *  that the board level drivers should be located in a folder named "Board" located inside the application's folder.
  *
- *  When used, the driver stub files located in the DriverStubs folder should be copied to the user Board directory,
- *  and fleshed out to include the values and code needed to control the custom board hardware. Once done, the existing
- *  LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the user board drivers,
- *  maintaining code compatibility and allowing for a different board to be selected through the project makefile with
- *  no code changes.
+ *  When used, the driver stub files located in the LUFA/CodeTemplates/DriverStubs folder should be copied to the user
+ *  Board/ directory, and fleshed out to include the values and code needed to control the custom board hardware. Once
+ *  done, the existing LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the
+ *  user board drivers, maintaining code compatibility and allowing for a different board to be selected through the
+ *  project makefile with no code changes.
  */

diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index db11953..a995bdd 100644 (file)
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -544,7 +544,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -555,7 +555,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index 9d29f6a..35073f8 100644 (file)
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -66,7 +66,7 @@ MCU = atmega32u2
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = BENITO
+BOARD = BENITO
 
 
 # Processor frequency.
@@ -530,7 +530,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -541,7 +541,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile
index 47fed5c..40de194 100644 (file)
--- a/Projects/Incomplete/StandaloneProgrammer/makefile
+++ b/Projects/Incomplete/StandaloneProgrammer/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -530,7 +530,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -541,7 +541,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile
index 4b168b4..39e8a11 100644 (file)
--- a/Projects/LEDNotifier/makefile
+++ b/Projects/LEDNotifier/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = BUI
+BOARD = BUI
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index e168aa4..3773dfe 100644 (file)
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = NONE
+BOARD = NONE
 
 
 # Processor frequency.
@@ -533,7 +533,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -544,7 +544,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index 082df26..7df04f3 100644 (file)
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -518,7 +518,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -529,7 +529,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile
index 5dc0184..0672354 100644 (file)
--- a/Projects/RelayBoard/makefile
+++ b/Projects/RelayBoard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile
index ef31c50..4f04ce5 100644 (file)
--- a/Projects/TempDataLogger/makefile
+++ b/Projects/TempDataLogger/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -532,7 +532,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -543,7 +543,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile
index b85e7a3..4aaf262 100644 (file)
--- a/Projects/USBtoSerial/makefile
+++ b/Projects/USBtoSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile
index 1f9bb9a..28dc05b 100644 (file)
--- a/Projects/Webserver/makefile
+++ b/Projects/Webserver/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -556,7 +556,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -567,7 +567,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 

diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile
index 42807d1..3088442 100644 (file)
--- a/Projects/XPLAINBridge/makefile
+++ b/Projects/XPLAINBridge/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = XPLAIN
+BOARD = XPLAIN
 
 
 # Processor frequency.
@@ -547,7 +547,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -558,7 +558,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
        dfu-programmer $(MCU) reset