Fixed broken AVR8 USART-SPI peripheral driver (thanks to Phil Zakielarz).

diff --git a/BuildTests/ModuleTest/Modules.h b/BuildTests/ModuleTest/Modules.h
index a027f80..cc16fd6 100644 (file)
--- a/BuildTests/ModuleTest/Modules.h
+++ b/BuildTests/ModuleTest/Modules.h
@@ -37,20 +37,20 @@
 #include <LUFA/Drivers/Misc/TerminalCodes.h>
 
 #if (ARCH == ARCH_AVR8)
-       #if defined(TWCR)
-               #include <LUFA/Drivers/Peripheral/TWI.h>
-       #endif
-
        #if defined(ADC)
                #include <LUFA/Drivers/Peripheral/ADC.h>
        #endif
 
        #include <LUFA/Drivers/Peripheral/Serial.h>
-       #include <LUFA/Drivers/Peripheral/SPI.h>
        #include <LUFA/Drivers/Peripheral/SerialSPI.h>
+       #include <LUFA/Drivers/Peripheral/SPI.h>
+
+       #if defined(TWCR)
+               #include <LUFA/Drivers/Peripheral/TWI.h>
+       #endif
 #elif (ARCH == ARCH_XMEGA)
-       #include <LUFA/Drivers/Peripheral/TWI.h>
        #include <LUFA/Drivers/Peripheral/Serial.h>
-       #include <LUFA/Drivers/Peripheral/SPI.h>
        #include <LUFA/Drivers/Peripheral/SerialSPI.h>
+       #include <LUFA/Drivers/Peripheral/SPI.h>
+       #include <LUFA/Drivers/Peripheral/TWI.h>
 #endif

diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt
index 075fb25..ef1fe6c 100644 (file)
--- a/LUFA/DoxygenPages/ChangeLog.txt
+++ b/LUFA/DoxygenPages/ChangeLog.txt
@@ -33,6 +33,7 @@
   *     FLASH memory devices (thanks to demultiplexer)
   *   - Fixed missing parenthesis in the MIDI_EVENT() macro which could cause incorrect results (thanks to hexwab)
   *   - Fixed mixed capitalization of TWI in the XMEGA TWI driver causing compilation failures (thanks to Jacob Schloss)
+  *   - Fixed broken AVR8 USART-SPI peripheral driver (thanks to Phil Zakielarz)
   *  - Library Applications:
   *   - Fixed spurious 0xFE USART byte sent in the USBtoSerial project when the baud rate is changed (thanks to Carl Kjeldsen)
   *   - Fixed blocking USART reads causing low throughput on slow baud rates in the USBtoSerial project (thanks to Nevada Smith)

diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
index 7afaf1b..8d58369 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
@@ -52,7 +52,7 @@
  *
  *  \code
  *      // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
- *      SerialSPI_Init((USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000);
+ *      SerialSPI_Init((USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000);
  *
  *      // Send several bytes, ignoring the returned data
  *      SerialSPI_SendByte(0x01);
@@ -90,37 +90,45 @@
                #endif
 
        /* Private Interface - For use in library only: */
-       #if !defined(__DOXYGEN__)
-                       #define SERIAL_SPI_UBBRVAL(Baud)       ((Baud < (F_CPU / 2)) ? ((F_CPU / (2 * Baud)) - 1) : 0)
-       #endif
+               #if !defined(__DOXYGEN__)
+                       #define SERIAL_SPI_UBBRVAL(Baud)             ((Baud < (F_CPU / 2)) ? ((F_CPU / (2 * Baud)) - 1) : 0)
+
+                       /* Master USART SPI mode flag definitions missing in the AVR8 toolchain */
+                       #if !defined(UCPHA1)
+                               #define UCPHA1                           1
+                       #endif
+                       #if !defined(UDORD1)
+                               #define UDORD1                           2
+                       #endif
+               #endif
 
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */
                        //@{
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
-                       #define USART_SPI_SCK_LEAD_RISING            (0 << UCPOL)
+                       #define USART_SPI_SCK_LEAD_RISING            (0 << UCPOL1)
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
-                       #define USART_SPI_SCK_LEAD_FALLING           (1 << UCPOL)
+                       #define USART_SPI_SCK_LEAD_FALLING           (1 << UCPOL1)
                        //@}
 
                        /** \name SPI Sample Edge Configuration Masks */
                        //@{
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
-                       #define USART_SPI_SAMPLE_LEADING             (0 << UPCHA)
+                       #define USART_SPI_SAMPLE_LEADING             (0 << UCPHA1)
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
-                       #define USART_SPI_SAMPLE_TRAILING            (1 << UPCHA)
+                       #define USART_SPI_SAMPLE_TRAILING            (1 << UCPHA1)
                        //@}
 
                        /** \name SPI Data Ordering Configuration Masks */
                        //@{
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
-                       #define USART_SPI_ORDER_MSB_FIRST            (0 << UDORD)
+                       #define USART_SPI_ORDER_MSB_FIRST            (0 << UDORD1)
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
-                       #define USART_SPI_ORDER_LSB_FIRST            (1 << UDORD)
+                       #define USART_SPI_ORDER_LSB_FIRST            (1 << UDORD1)
                        //@}
 
                /* Inline Functions: */