Spell checked non-source documentation pages.

diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt
index 44158ed..eb6495e 100644 (file)
--- a/Bootloaders/DFU/BootloaderDFU.txt
+++ b/Bootloaders/DFU/BootloaderDFU.txt
@@ -44,9 +44,9 @@
  *  As an open-source option, this bootloader is also compatible with the Linux Atmel USB DFU Programmer\r
  *  software, available for download at http://sourceforge.net/projects/dfu-programmer/.\r
  *  \r
  *  As an open-source option, this bootloader is also compatible with the Linux Atmel USB DFU Programmer\r
  *  software, available for download at http://sourceforge.net/projects/dfu-programmer/.\r
  *  \r

- *  If SECURE_MODE is defined as true, upon startup the bootloader will be locked, with only the chip erase\r
+ *  If SECURE_MODE is defined as true, upon start-up the bootloader will be locked, with only the chip erase\r

  *  function available (similar to Atmel's DFU bootloader). If SECURE_MODE is defined as false, all functions \r
  *  function available (similar to Atmel's DFU bootloader). If SECURE_MODE is defined as false, all functions \r

- *  are usable on startup without the prerequisite firmware erase.\r
+ *  are usable on start-up without the prerequisite firmware erase.\r

  *  \r
  *  Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If\r
  *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU\r
  *  \r
  *  Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If\r
  *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU\r


@@ -69,8 +69,8 @@
  *   <tr>\r
  *    <td>SECURE_MODE</td>\r
  *    <td>BootloaderDFU.h</td>\r
  *   <tr>\r
  *    <td>SECURE_MODE</td>\r
  *    <td>BootloaderDFU.h</td>\r

- *    <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on statup, until an\r
- *        erase has been perfomed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from\r
+ *    <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an\r
+ *        erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from\r

  *        being dumped by unauthorized persons.</td>\r
  *   </tr>\r
  *   <tr>\r
  *        being dumped by unauthorized persons.</td>\r
  *   </tr>\r
  *   <tr>\r


@@ -81,4 +81,4 @@
  *        manually in the makefile CDEFS.</td>\r
  *   </tr>\r
  *  </table>\r
  *        manually in the makefile CDEFS.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Bootloaders/TeensyHID/TeensyHID.txt b/Bootloaders/TeensyHID/TeensyHID.txt
index 1d83510..3ef5e9f 100644 (file)
--- a/Bootloaders/TeensyHID/TeensyHID.txt
+++ b/Bootloaders/TeensyHID/TeensyHID.txt
@@ -42,7 +42,7 @@
  *  \r
  * Out of the box this bootloader builds for the USB162, and will fit into 2KB of bootloader space.\r
  *\r
  *  \r
  * Out of the box this bootloader builds for the USB162, and will fit into 2KB of bootloader space.\r
  *\r

- * This spoofs (with permission) the offical Teensy bootloader's VID and PID, so that the software remains\r
+ * This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains\r

  * compatible with no changes.\r
  *\r
  *  \section SSec_Options Project Options\r
  * compatible with no changes.\r
  *\r
  *  \section SSec_Options Project Options\r


@@ -56,4 +56,4 @@
  *    </td>\r
  *   </tr>\r
  *  </table>\r
  *    </td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/AudioInput/AudioInput.txt b/Demos/Device/AudioInput/AudioInput.txt
index 0b1ab8d..cf71259 100644 (file)
--- a/Demos/Device/AudioInput/AudioInput.txt
+++ b/Demos/Device/AudioInput/AudioInput.txt
@@ -42,8 +42,8 @@
  *  basic USB Audio drivers in all modern OSes (i.e. no special drivers\r
  *  required).\r
  *  \r
  *  basic USB Audio drivers in all modern OSes (i.e. no special drivers\r
  *  required).\r
  *  \r

- *  On startup the system will automatically enumerate and function\r
- *  as a USB microphone. Incomming audio from the ADC channel 1 will\r
+ *  On start-up the system will automatically enumerate and function\r
+ *  as a USB microphone. Incoming audio from the ADC channel 1 will\r

  *  be sampled and sent to the host computer.\r
  *  \r
  *  To use, connect a microphone to the ADC channel 2.\r
  *  be sampled and sent to the host computer.\r
  *  \r
  *  To use, connect a microphone to the ADC channel 2.\r


@@ -72,4 +72,4 @@
  *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>\r
  *   </tr>\r
  *  </table>\r
  *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/AudioOutput/AudioOutput.txt b/Demos/Device/AudioOutput/AudioOutput.txt
index b59c2a8..a47f9b5 100644 (file)
--- a/Demos/Device/AudioOutput/AudioOutput.txt
+++ b/Demos/Device/AudioOutput/AudioOutput.txt
@@ -42,8 +42,8 @@
  *  basic USB Audio drivers in all modern OSes (i.e. no special drivers\r
  *  required).\r
  *  \r
  *  basic USB Audio drivers in all modern OSes (i.e. no special drivers\r
  *  required).\r
  *  \r

- *  On startup the system will automatically enumerate and function\r
- *  as a USB speaker. Incomming audio will output in 8-bit PWM onto\r
+ *  On start-up the system will automatically enumerate and function\r
+ *  as a USB speaker. Incoming audio will output in 8-bit PWM onto\r

  *  the timer output (timer 3 for the AT90USBXXX6/7 USB AVRs, timer 1 for\r
  *  the AT90USBXXX2 controller AVRs) compare channel A for AUDIO_OUT_MONO\r
  *  mode, on channels A and B for AUDIO_OUT_STEREO and on the board LEDs\r
  *  the timer output (timer 3 for the AT90USBXXX6/7 USB AVRs, timer 1 for\r
  *  the AT90USBXXX2 controller AVRs) compare channel A for AUDIO_OUT_MONO\r
  *  mode, on channels A and B for AUDIO_OUT_STEREO and on the board LEDs\r


@@ -90,4 +90,4 @@
  *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>\r
  *   </tr>\r
  *  </table>\r
  *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/GenericHID/GenericHID.txt b/Demos/Device/GenericHID/GenericHID.txt
index e6c2fbc..2e092cf 100644 (file)
--- a/Demos/Device/GenericHID/GenericHID.txt
+++ b/Demos/Device/GenericHID/GenericHID.txt
@@ -40,7 +40,7 @@
  *  OSes (i.e. no special drivers required). It accepts and sends up to 255 byte reports to\r
  *  and from a USB Host, and by default transmits the last sent report back to the host.\r
  *  \r
  *  OSes (i.e. no special drivers required). It accepts and sends up to 255 byte reports to\r
  *  and from a USB Host, and by default transmits the last sent report back to the host.\r
  *  \r

- *  On startup the system will automatically enumerate and function as a vendor HID device.\r
+ *  On start-up the system will automatically enumerate and function as a vendor HID device.\r

  *  When controlled by a custom HID class application, reports can be sent and received by\r
  *  both the standard data endpoint and control request methods defined in the HID specification.\r
  *\r
  *  When controlled by a custom HID class application, reports can be sent and received by\r
  *  both the standard data endpoint and control request methods defined in the HID specification.\r
  *\r


@@ -71,8 +71,8 @@
  *    <td>INTERRUPT_DATA_ENDPOINT</td>\r
  *    <td>Makefile CDEFS</td>\r
  *    <td>When defined, this causes the demo to enable interrupts for the data endpoints,\r
  *    <td>INTERRUPT_DATA_ENDPOINT</td>\r
  *    <td>Makefile CDEFS</td>\r
  *    <td>When defined, this causes the demo to enable interrupts for the data endpoints,\r

- *        which services incomming LED reports and outgoing key status reports to and from the host.\r
+ *        which services incoming LED reports and outgoing key status reports to and from the host.\r

  *        If not defined, the data endpoints are serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r
  *        If not defined, the data endpoints are serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/Keyboard/Keyboard.txt b/Demos/Device/Keyboard/Keyboard.txt
index a09d835..fd95e45 100644 (file)
--- a/Demos/Device/Keyboard/Keyboard.txt
+++ b/Demos/Device/Keyboard/Keyboard.txt
@@ -40,11 +40,11 @@
  *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus\r
  *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).\r
  *  \r
  *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus\r
  *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).\r
  *  \r

- *  On startup the system will automatically enumerate and function\r
+ *  On start-up the system will automatically enumerate and function\r

  *  as a keyboard when the USB connection to a host is present. To use\r
  *  the keyboard example, manipulate the joystick to send the letters\r
  *  a, b, c, d and e. See the USB HID documentation for more information\r
  *  as a keyboard when the USB connection to a host is present. To use\r
  *  the keyboard example, manipulate the joystick to send the letters\r
  *  a, b, c, d and e. See the USB HID documentation for more information\r

- *  on sending keyboard event and keypresses.\r
+ *  on sending keyboard event and key presses.\r

  *\r
  *  \section SSec_Options Project Options\r
  *  \r
  *\r
  *  \section SSec_Options Project Options\r
  *  \r


@@ -67,8 +67,8 @@
  *    <td>INTERRUPT_DATA_ENDPOINT</td>\r
  *    <td>Makefile CDEFS</td>\r
  *    <td>When defined, this causes the demo to enable interrupts for the data endpoints,\r
  *    <td>INTERRUPT_DATA_ENDPOINT</td>\r
  *    <td>Makefile CDEFS</td>\r
  *    <td>When defined, this causes the demo to enable interrupts for the data endpoints,\r

- *        which services incomming LED reports and outgoing key status reports to and from the host.\r
+ *        which services incoming LED reports and outgoing key status reports to and from the host.\r

  *        If not defined, the data endpoints are serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r
  *        If not defined, the data endpoints are serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/KeyboardMouse/KeyboardMouse.txt
index 6388e98..3e31057 100644 (file)
--- a/Demos/Device/KeyboardMouse/KeyboardMouse.txt
+++ b/Demos/Device/KeyboardMouse/KeyboardMouse.txt
@@ -38,15 +38,15 @@
  *  Keyboard/Mouse demonstration application. This gives a simple reference\r
  *  application for implementing a composite device containing both USB Keyboard\r
  *  and USB Mouse functionality using the basic USB HID drivers in all modern OSes\r
  *  Keyboard/Mouse demonstration application. This gives a simple reference\r
  *  application for implementing a composite device containing both USB Keyboard\r
  *  and USB Mouse functionality using the basic USB HID drivers in all modern OSes\r

- *  (i.e. no special drivers required). This example uses two seperate HID\r
+ *  (i.e. no special drivers required). This example uses two separate HID\r

  *  interfaces for each function. It is boot protocol compatible, and thus works under\r
  *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).\r
  *  \r
  *  interfaces for each function. It is boot protocol compatible, and thus works under\r
  *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).\r
  *  \r

- *  On startup the system will automatically enumerate and function\r
+ *  On start-up the system will automatically enumerate and function\r

  *  as a keyboard when the USB connection to a host is present and the HWB is not\r
  *  pressed. When enabled, manipulate the joystick to send the letters\r
  *  a, b, c, d and e. See the USB HID documentation for more information\r
  *  as a keyboard when the USB connection to a host is present and the HWB is not\r
  *  pressed. When enabled, manipulate the joystick to send the letters\r
  *  a, b, c, d and e. See the USB HID documentation for more information\r

- *  on sending keyboard event and keypresses.\r
+ *  on sending keyboard event and key presses.\r

  *  \r
  *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the\r
  *  joystick to move the pointer, and push the joystick inwards to simulate a\r
  *  \r
  *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the\r
  *  joystick to move the pointer, and push the joystick inwards to simulate a\r


@@ -63,4 +63,4 @@
  *    </td>\r
  *   </tr>\r
  *  </table>\r
  *    </td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/MIDI/MIDI.txt b/Demos/Device/MIDI/MIDI.txt
index 3eb60cd..5a31350 100644 (file)
--- a/Demos/Device/MIDI/MIDI.txt
+++ b/Demos/Device/MIDI/MIDI.txt
@@ -26,7 +26,7 @@
  *   <tr>\r
  *    <td><b>Relevant Standards:</b></td>\r
  *    <td>USBIF Audio Class Specification</td>\r
  *   <tr>\r
  *    <td><b>Relevant Standards:</b></td>\r
  *    <td>USBIF Audio Class Specification</td>\r

- *    <td>USB-MIDI Audio Class Extention Specification</td>\r
+ *    <td>USB-MIDI Audio Class Extension Specification</td>\r

  *    <td>General MIDI Specification</td>\r
  *   </tr>\r
  *   <tr>\r
  *    <td>General MIDI Specification</td>\r
  *   </tr>\r
  *   <tr>\r


@@ -62,4 +62,4 @@
  *    </td>\r
  *   </tr>\r
  *  </table>\r
  *    </td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/MassStorage/MassStorage.txt b/Demos/Device/MassStorage/MassStorage.txt
index 4e8adad..9db731c 100644 (file)
--- a/Demos/Device/MassStorage/MassStorage.txt
+++ b/Demos/Device/MassStorage/MassStorage.txt
@@ -43,8 +43,8 @@
  *  device using the basic USB UFI drivers in all modern OSes (i.e. no\r
  *  special drivers required).\r
  *  \r
  *  device using the basic USB UFI drivers in all modern OSes (i.e. no\r
  *  special drivers required).\r
  *  \r

- *  On startup the system will automatically enumerate and function as an\r
- *  external mass storage device with two LUNs (seperate disks) which may\r
+ *  On start-up the system will automatically enumerate and function as an\r
+ *  external mass storage device with two LUNs (separate disks) which may\r

  *  be formatted and used in the same manner as commercial USB Mass Storage\r
  *  devices.\r
  *     \r
  *  be formatted and used in the same manner as commercial USB Mass Storage\r
  *  devices.\r
  *     \r


@@ -75,4 +75,4 @@
  *        - this can be set to any positive non-zero amount.</td>\r
  *   </tr>\r
  *  </table>\r
  *        - this can be set to any positive non-zero amount.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Device/Mouse/Mouse.txt b/Demos/Device/Mouse/Mouse.txt
index 6764275..2d566dd 100644 (file)
--- a/Demos/Device/Mouse/Mouse.txt
+++ b/Demos/Device/Mouse/Mouse.txt
@@ -41,7 +41,7 @@
  *  boot protocol compatible, and thus works under compatible BIOS as if\r
  *  it was a native mouse (e.g. PS/2).\r
  *  \r
  *  boot protocol compatible, and thus works under compatible BIOS as if\r
  *  it was a native mouse (e.g. PS/2).\r
  *  \r

- *  On startup the system will automatically enumerate and function\r
+ *  On start-up the system will automatically enumerate and function\r

  *  as a mouse when the USB connection to a host is present. To use\r
  *  the mouse, move the joystick to move the pointer, and push the\r
  *  joystick inwards to simulate a left-button click. The HWB serves as\r
  *  as a mouse when the USB connection to a host is present. To use\r
  *  the mouse, move the joystick to move the pointer, and push the\r
  *  joystick inwards to simulate a left-button click. The HWB serves as\r


@@ -72,4 +72,4 @@
  *        the data endpoint is serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r
  *        the data endpoint is serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Host/CDCHost/CDCHost.txt b/Demos/Host/CDCHost/CDCHost.txt
index 39e2357..4fac1d0 100644 (file)
--- a/Demos/Host/CDCHost/CDCHost.txt
+++ b/Demos/Host/CDCHost/CDCHost.txt
@@ -42,8 +42,8 @@
  *  \r
  *  Not that this demo is only compatible with devices which report the correct CDC\r
  *  and ACM class, subclass and protocol values. Most USB-Serial cables have vendor\r
  *  \r
  *  Not that this demo is only compatible with devices which report the correct CDC\r
  *  and ACM class, subclass and protocol values. Most USB-Serial cables have vendor\r

- *  specific features, thus use vendor-specfic class/subclass/protocol codes to force\r
- *  the user to use specialized drivers. This demo is not compaible with such devices.\r
+ *  specific features, thus use vendor-specific class/subclass/protocol codes to force\r
+ *  the user to use specialized drivers. This demo is not compatible with such devices.\r

  *\r
  *  \section SSec_Options Project Options\r
  *\r
  *\r
  *  \section SSec_Options Project Options\r
  *\r


@@ -56,4 +56,4 @@
  *    </td>\r
  *   </tr>\r
  *  </table>\r
  *    </td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Host/GenericHIDHost/GenericHIDHost.txt b/Demos/Host/GenericHIDHost/GenericHIDHost.txt
index 0b70bfa..4117417 100644 (file)
--- a/Demos/Host/GenericHIDHost/GenericHIDHost.txt
+++ b/Demos/Host/GenericHIDHost/GenericHIDHost.txt
@@ -36,7 +36,7 @@
  *  \section SSec_Description Project Description: \r
  *\r
  *  Generic HID host demonstration application. This gives a simple reference\r
  *  \section SSec_Description Project Description: \r
  *\r
  *  Generic HID host demonstration application. This gives a simple reference\r

- *  application for implementing a Genric HID USB host, for any device implementing\r
+ *  application for implementing a Generic HID USB host, for any device implementing\r

  *  the HID profile.\r
  *\r
  *  Received reports from the attached device are printed to the serial port.\r
  *  the HID profile.\r
  *\r
  *  Received reports from the attached device are printed to the serial port.\r


@@ -59,4 +59,4 @@
  *        serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r
  *        serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Host/KeyboardHost/KeyboardHost.txt b/Demos/Host/KeyboardHost/KeyboardHost.txt
index 8abe99f..455c2d2 100644 (file)
--- a/Demos/Host/KeyboardHost/KeyboardHost.txt
+++ b/Demos/Host/KeyboardHost/KeyboardHost.txt
@@ -45,7 +45,7 @@
  *  This uses a naive method where the keyboard is set to Boot Protocol mode, so\r
  *  that the report structure is fixed and known. A better implementation\r
  *  uses the HID report parser for correct report data processing across\r
  *  This uses a naive method where the keyboard is set to Boot Protocol mode, so\r
  *  that the report structure is fixed and known. A better implementation\r
  *  uses the HID report parser for correct report data processing across\r

- *  all compatable mice with advanced characteristics, as shown in the\r
+ *  all compatible mice with advanced characteristics, as shown in the\r

  *  KeyboardHostWithParser demo application.\r
  *  \r
  *  Currently only single interface keyboards are supported.\r
  *  KeyboardHostWithParser demo application.\r
  *  \r
  *  Currently only single interface keyboards are supported.\r


@@ -68,4 +68,4 @@
  *        serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r
  *        serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Host/MouseHost/MouseHost.txt b/Demos/Host/MouseHost/MouseHost.txt
index d36c731..118ca9d 100644 (file)
--- a/Demos/Host/MouseHost/MouseHost.txt
+++ b/Demos/Host/MouseHost/MouseHost.txt
@@ -46,7 +46,7 @@
  *  This uses a naive method where the mouse is set to Boot Protocol mode, so\r
  *  that the report structure is fixed and known. A better implementation\r
  *  uses the HID report parser for correct report data processing across\r
  *  This uses a naive method where the mouse is set to Boot Protocol mode, so\r
  *  that the report structure is fixed and known. A better implementation\r
  *  uses the HID report parser for correct report data processing across\r

- *  all compatable mice with advanced characteristics, as shown in the\r
+ *  all compatible mice with advanced characteristics, as shown in the\r

  *  MouseHostWithParser demo application.\r
  *  \r
  *  Currently only single interface mice are supported.        \r
  *  MouseHostWithParser demo application.\r
  *  \r
  *  Currently only single interface mice are supported.        \r


@@ -69,4 +69,4 @@
  *        serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r
  *        serviced via polling using the task scheduler.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/Demos/Host/StillImageHost/StillImageCommands.c b/Demos/Host/StillImageHost/StillImageCommands.c
index ebf20b0..a127857 100644 (file)
--- a/Demos/Host/StillImageHost/StillImageCommands.c
+++ b/Demos/Host/StillImageHost/StillImageCommands.c
@@ -261,14 +261,14 @@ bool SImage_IsEventReceived(void)
  *\r
  *  \return A value from the USB_Host_SendControlErrorCodes_t enum\r
  */\r
  *\r
  *  \return A value from the USB_Host_SendControlErrorCodes_t enum\r
  */\r

-uint8_t SImage_ClearPipeStall(const uint8_t PipeEndpointNum)\r
+uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum)\r

 {\r
        USB_HostRequest = (USB_Host_Request_Header_t)\r
                {\r
                        bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),\r
                        bRequest:      REQ_ClearFeature,\r
                        wValue:        FEATURE_ENDPOINT_HALT,\r
 {\r
        USB_HostRequest = (USB_Host_Request_Header_t)\r
                {\r
                        bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),\r
                        bRequest:      REQ_ClearFeature,\r
                        wValue:        FEATURE_ENDPOINT_HALT,\r

-                       wIndex:        PipeEndpointNum,\r
+                       wIndex:        EndpointNum,\r

                        wLength:       0,\r
                };\r
        \r
                        wLength:       0,\r
                };\r
        \r

diff --git a/Demos/Host/StillImageHost/StillImageCommands.h b/Demos/Host/StillImageHost/StillImageCommands.h
index 38bbadf..ad0ba55 100644 (file)
--- a/Demos/Host/StillImageHost/StillImageCommands.h
+++ b/Demos/Host/StillImageHost/StillImageCommands.h
@@ -105,6 +105,6 @@
                void    SImage_SendData(void* Buffer, uint16_t Bytes);\r
                uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes);\r
                bool    SImage_IsEventReceived(void);\r
                void    SImage_SendData(void* Buffer, uint16_t Bytes);\r
                uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes);\r
                bool    SImage_IsEventReceived(void);\r

-               uint8_t SImage_ClearPipeStall(const uint8_t PipeEndpointNum);\r
+               uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum);\r

 \r
 #endif\r
 \r
 #endif\r

diff --git a/Demos/Host/StillImageHost/StillImageHost.c b/Demos/Host/StillImageHost/StillImageHost.c
index d9dd7ce..3e5bf6a 100644 (file)
--- a/Demos/Host/StillImageHost/StillImageHost.c
+++ b/Demos/Host/StillImageHost/StillImageHost.c
@@ -417,7 +417,7 @@ void UpdateStatus(uint8_t CurrentStatus)
 /** Displays a PIMA command error via the device's serial port.\r
  *\r
  *  \param ErrorCode          Error code of the function which failed to complete successfully\r
 /** Displays a PIMA command error via the device's serial port.\r
  *\r
  *  \param ErrorCode          Error code of the function which failed to complete successfully\r

- *  \param ResponseErrorCode  Indicates if the error is due to a command failed indication from the device, or a communication failure\r
+ *  \param ResponseCodeError  Indicates if the error is due to a command failed indication from the device, or a communication failure\r

  */\r
 void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError)\r
 {\r
  */\r
 void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError)\r
 {\r

diff --git a/Demos/OTG/TestApp/TestApp.txt b/Demos/OTG/TestApp/TestApp.txt
index aef55b7..a0f1488 100644 (file)
--- a/Demos/OTG/TestApp/TestApp.txt
+++ b/Demos/OTG/TestApp/TestApp.txt
@@ -36,7 +36,7 @@
  *  \section SSec_Description Project Description: \r
  *\r
  *  Test application. Demonstrates several aspects of the LUFA\r
  *  \section SSec_Description Project Description: \r
  *\r
  *  Test application. Demonstrates several aspects of the LUFA\r

- *  Library. On startup the current temperature will be printed\r
+ *  Library. On start-up the current temperature will be printed\r

  *  through the USART every 10 seconds, and the current joystick\r
  *  position will be indicated via the LEDs on the selected board.\r
  *  Pressing the HWB will initiate the USB subsystem, enumerating\r
  *  through the USART every 10 seconds, and the current joystick\r
  *  position will be indicated via the LEDs on the selected board.\r
  *  Pressing the HWB will initiate the USB subsystem, enumerating\r


@@ -66,4 +66,4 @@
  *    </td>\r
  *   </tr>\r
  *  </table>\r
  *    </td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r

diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt
index 16862ca..d2f7fcb 100644 (file)
--- a/LUFA/ChangeLog.txt
+++ b/LUFA/ChangeLog.txt
@@ -24,7 +24,7 @@
   *    code without having to be itself patched and recompiled first\r
   *  - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to\r
   *    outdated avr-libc versions.\r
   *    code without having to be itself patched and recompiled first\r
   *  - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to\r
   *    outdated avr-libc versions.\r

-  *  - Added support to the CDCHost demo for devices with mutiple CDC interfaces which are not the correct ACM type preceeding the desired\r
+  *  - Added support to the CDCHost demo for devices with multiple CDC interfaces which are not the correct ACM type preceding the desired\r

   *    ACM CDC interface\r
   *  - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen)\r
   *  - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley)\r
   *    ACM CDC interface\r
   *  - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen)\r
   *  - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley)\r


@@ -53,7 +53,7 @@
   *    device descriptor\r
   *  - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name\r
   *  - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman)\r
   *    device descriptor\r
   *  - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name\r
   *  - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman)\r

-  *  - Capitolised the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and\r
+  *  - Capitalised the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and\r

   *    DSearch_Comp_Return_ErrorCodes_t enums\r
   *    \r
   *\r
   *    DSearch_Comp_Return_ErrorCodes_t enums\r
   *    \r
   *\r


@@ -63,7 +63,7 @@
   *  - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations\r
   *  - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data\r
   *  - LUFA devices now enumerate correctly with LUFA hosts\r
   *  - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations\r
   *  - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data\r
   *  - LUFA devices now enumerate correctly with LUFA hosts\r

-  *  - Fixed Configuration Descriptor search routine freezing when a comparitor returned a failure\r
+  *  - Fixed Configuration Descriptor search routine freezing when a comparator returned a failure\r

   *  - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and\r
   *    slowed down the enumeration of HID devices too much\r
   *  - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7\r
   *  - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and\r
   *    slowed down the enumeration of HID devices too much\r
   *  - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7\r


@@ -91,7 +91,7 @@
   *  - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos\r
   *  - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos\r
   *  - Removed AVRISP_Programmer project due to code quality concerns\r
   *  - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos\r
   *  - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos\r
   *  - Removed AVRISP_Programmer project due to code quality concerns\r

-  *  - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incomming data\r
+  *  - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incoming data\r

   *  - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)\r
   *  - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg)\r
   *  - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)\r
   *  - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)\r
   *  - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg)\r
   *  - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)\r


@@ -133,7 +133,7 @@
   *  - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol\r
   *  - Added new "dfu" and "flip" programming targets to project makefiles\r
   *  - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful\r
   *  - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol\r
   *  - Added new "dfu" and "flip" programming targets to project makefiles\r
   *  - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful\r

-  *  - Changed COLLECTION item strucutres in the HID descriptor parser to include the collection's Usage Page value\r
+  *  - Changed COLLECTION item structures in the HID descriptor parser to include the collection's Usage Page value\r

   *  - Serial driver now sets Tx line as output, enables pullup on Rx line\r
   *  - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled\r
   *  - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated\r
   *  - Serial driver now sets Tx line as output, enables pullup on Rx line\r
   *  - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled\r
   *  - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated\r


@@ -189,7 +189,7 @@
   *    easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes\r
   *  - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software\r
   *  - Fixed RNDIS demo ICMP ping requests echoing back incorrect data\r
   *    easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes\r
   *  - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software\r
   *  - Fixed RNDIS demo ICMP ping requests echoing back incorrect data\r

-  *  - Added DHCP server code to RNDIS demo, allowing for hands-free autoconfiguration on any PC\r
+  *  - Added DHCP server code to RNDIS demo, allowing for hands-free auto configuration on any PC\r

   *  - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR\r
   *  - Endpoint and Pipe configuration functions now return an error code indicating success or failure\r
   *  - USB Reset in device mode now resets and disables all device endpoints\r
   *  - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR\r
   *  - Endpoint and Pipe configuration functions now return an error code indicating success or failure\r
   *  - USB Reset in device mode now resets and disables all device endpoints\r


@@ -197,7 +197,7 @@
   *    invocation when in host mode\r
   *  - Added support for the ATMEGA32U6 microcontroller\r
   *  - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage\r
   *    invocation when in host mode\r
   *  - Added support for the ATMEGA32U6 microcontroller\r
   *  - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage\r

-  *  - Removed redudant code from the USB device GetStatus() chapter 9 processing routine\r
+  *  - Removed redundant code from the USB device GetStatus() chapter 9 processing routine\r

   *  - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/)\r
   *  - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers\r
   *  - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host\r
   *  - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/)\r
   *  - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers\r
   *  - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host\r


@@ -211,7 +211,7 @@
   *  - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS)\r
   *  - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes\r
   *  - Removed serial number strings from all but the MassStore demo where it is required - users were not\r
   *  - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS)\r
   *  - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes\r
   *  - Removed serial number strings from all but the MassStore demo where it is required - users were not\r

-  *    modifing the code to either ommit the descriptor or use a unique serial per device causing problems\r
+  *    modifying the code to either omit the descriptor or use a unique serial per device causing problems\r

   *    when multiple units of the same device were plugged in at the same time\r
   *  - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host\r
   *  - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo)\r
   *    when multiple units of the same device were plugged in at the same time\r
   *  - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host\r
   *  - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo)\r


@@ -289,7 +289,7 @@
   *  - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction\r
   *    size bits not required for the routines (improves compatibility with devices)\r
   *  - Fixed AudioInput demo - now correctly sends sampled audio to the host PC\r
   *  - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction\r
   *    size bits not required for the routines (improves compatibility with devices)\r
   *  - Fixed AudioInput demo - now correctly sends sampled audio to the host PC\r

-  *  - Fixed AudioOutput demo oncemore -- apparently Windows requires endpoint packets to be >=192 bytes\r
+  *  - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes\r

   *  - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes\r
   *  - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser\r
   *  - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder\r
   *  - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes\r
   *  - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser\r
   *  - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder\r


@@ -298,25 +298,25 @@
   *  - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently\r
   *    handled via interrupts while other endpoints are serviced through polling\r
   *  - Fixed device signature being sent in reverse order in the CDC bootloader\r
   *  - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently\r
   *    handled via interrupts while other endpoints are serviced through polling\r
   *  - Fixed device signature being sent in reverse order in the CDC bootloader\r

-  *  - Host demos now have a seperate ConfigDescriptor.c/.h file for configuration descriptor processing\r
-  *  - HostWithParser demos now have a seperate HIDReport.c/.h file for HID report processing and dumping\r
+  *  - Host demos now have a separate ConfigDescriptor.c/.h file for configuration descriptor processing\r
+  *  - HostWithParser demos now have a separate HIDReport.c/.h file for HID report processing and dumping\r

   *  - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value\r
   *  - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host\r
   *  - Updated demo descriptors to use VID/PID values donated by Atmel\r
   *  - Added DoxyGen documentation to the source files\r
   *  - Fixed Serial_IsCharRecieved() definition, was previously reversed\r
   *  - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value\r
   *  - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host\r
   *  - Updated demo descriptors to use VID/PID values donated by Atmel\r
   *  - Added DoxyGen documentation to the source files\r
   *  - Fixed Serial_IsCharRecieved() definition, was previously reversed\r

-  *  - Removed seperate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead\r
+  *  - Removed separate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead\r

   *  - Removed unused Device Qualifier descriptor structure\r
   *  - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged\r
   *  - Fixed MassStorageHost demo reading in the block data in reverse\r
   *  - Removed unused Device Qualifier descriptor structure\r
   *  - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged\r
   *  - Fixed MassStorageHost demo reading in the block data in reverse\r

-  *  - Removed outdated typedefs in StdRequestType.h, superceeded by the macro masks\r
+  *  - Removed outdated typedefs in StdRequestType.h, superseded by the macro masks\r

   *  - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products\r
   *  - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration\r
   *  - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete\r
   *  - USB_HOST_TIMEOUT_MS is now overridable in the user project makefile to a custom fixed timeout value\r
   *  - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus()\r
   *    and USB_Host_IsBusSuspended()\r
   *  - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products\r
   *  - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration\r
   *  - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete\r
   *  - USB_HOST_TIMEOUT_MS is now overridable in the user project makefile to a custom fixed timeout value\r
   *  - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus()\r
   *    and USB_Host_IsBusSuspended()\r

-  *  - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistant, Pipe_SetInterruptFreq() is now\r
+  *  - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistent, Pipe_SetInterruptFreq() is now\r

   *    Pipe_SetInterruptPeriod() to use the correct terminology\r
   *  - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC\r
   *    Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays\r
   *    Pipe_SetInterruptPeriod() to use the correct terminology\r
   *  - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC\r
   *    Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays\r


@@ -361,7 +361,7 @@
   *    new comparator API\r
   *  - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct\r
   *    big-endian for SCSI devices\r
   *    new comparator API\r
   *  - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct\r
   *    big-endian for SCSI devices\r

-  *  - Fixed macro/function naming consistancy; USB_HOST is now USB_Host, USB_DEV is now USB_Device\r
+  *  - Fixed macro/function naming consistency; USB_HOST is now USB_Host, USB_DEV is now USB_Device\r

   *  - Added better error reporting to host demos\r
   *  - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls\r
   *\r
   *  - Added better error reporting to host demos\r
   *  - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls\r
   *\r


@@ -374,7 +374,7 @@
   *    GetLineCoding request had an incorrect RequestType mask preventing it from being processed\r
   *  - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full\r
   *  - Device control endpoint size is now determined from the device's descriptors rather than being fixed\r
   *    GetLineCoding request had an incorrect RequestType mask preventing it from being processed\r
   *  - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full\r
   *  - Device control endpoint size is now determined from the device's descriptors rather than being fixed\r

-  *  - Seperated out SPI code into new SPI driver in AT90USBXXX driver directory\r
+  *  - Separated out SPI code into new SPI driver in AT90USBXXX driver directory\r

   *  - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID\r
   *  - Added support for the RZUSBSTICK board\r
   *  - Bicolour driver removed in favour of generic LEDs driver\r
   *  - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID\r
   *  - Added support for the RZUSBSTICK board\r
   *  - Bicolour driver removed in favour of generic LEDs driver\r


@@ -412,7 +412,7 @@
   *\r
   *  \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008\r
   *\r
   *\r
   *  \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008\r
   *\r

-  *  - Unneccesary control endpoint config removed from device mode\r
+  *  - Unnecessary control endpoint config removed from device mode\r

   *  - Fixed device standard request interpreter accidentally processing some class-specific requests\r
   *  - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library\r
   *    to use descriptors stored in RAM or EEPROM rather than flash memory\r
   *  - Fixed device standard request interpreter accidentally processing some class-specific requests\r
   *  - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library\r
   *    to use descriptors stored in RAM or EEPROM rather than flash memory\r


@@ -431,7 +431,7 @@
   *  - Added support for the STK525 and STK526 boards\r
   *  - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and\r
   *    placing board drivers in {Application Directory}/Board/\r
   *  - Added support for the STK525 and STK526 boards\r
   *  - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and\r
   *    placing board drivers in {Application Directory}/Board/\r

-  *  - PLL is now stopped and USB clock is frozen when detatched from host in device mode, to save power\r
+  *  - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power\r

   *  - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY\r
   *  - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register\r
   *  - Fixed data transfers to devices when in host mode\r
   *  - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY\r
   *  - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register\r
   *  - Fixed data transfers to devices when in host mode\r


@@ -479,4 +479,4 @@
   *  - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile\r
   *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and \r
   *    Endpoint_IsConfigured() after calling the config functions to determine success\r
   *  - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile\r
   *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and \r
   *    Endpoint_IsConfigured() after calling the config functions to determine success\r

-  */
\ No newline at end of file
+  */\r

diff --git a/LUFA/CompileTimeTokens.txt b/LUFA/CompileTimeTokens.txt
index 371c2c7..0dc4be0 100644 (file)
--- a/LUFA/CompileTimeTokens.txt
+++ b/LUFA/CompileTimeTokens.txt
@@ -21,11 +21,11 @@
  *  the source code at compile time.\r
  *\r
  *  <b>NUM_BLOCKS</b> - ( \ref Group_MemoryAllocator ) \n\r
  *  the source code at compile time.\r
  *\r
  *  <b>NUM_BLOCKS</b> - ( \ref Group_MemoryAllocator ) \n\r

- *  Sets the number of allocable blocks in the psudo-heap of the dynamic memory allocation driver. This should be\r
+ *  Sets the number of allocable blocks in the pseudo-heap of the dynamic memory allocation driver. This should be\r

  *  defined as a constant larger than zero.\r
  *\r
  *  <b>BLOCK_SIZE</b> - ( \ref Group_MemoryAllocator ) \n\r
  *  defined as a constant larger than zero.\r
  *\r
  *  <b>BLOCK_SIZE</b> - ( \ref Group_MemoryAllocator ) \n\r

- *  Sets the size of each allocable block in the psudo-heap of the dynamic memory allocation driver. This should be\r
+ *  Sets the size of each allocable block in the pseudo-heap of the dynamic memory allocation driver. This should be\r

  *  defined as a constant larger than zero.\r
  *\r
  *  <b>NUM_HANDLES</b> - ( \ref Group_MemoryAllocator ) \n\r
  *  defined as a constant larger than zero.\r
  *\r
  *  <b>NUM_HANDLES</b> - ( \ref Group_MemoryAllocator ) \n\r


@@ -42,7 +42,7 @@
  *  skipped when processing a device HID report.\r
  *\r
  *  <b>HID_INCLUDE_CONSTANT_DATA_ITEMS</b> - ( \ref Group_HIDParser ) \n\r
  *  skipped when processing a device HID report.\r
  *\r
  *  <b>HID_INCLUDE_CONSTANT_DATA_ITEMS</b> - ( \ref Group_HIDParser ) \n\r

- *  By default, constant data items (usually used as spacers to align seperate report items to a byte or word boundary)\r
+ *  By default, constant data items (usually used as spacers to align separate report items to a byte or word boundary)\r

  *  in the HID report are skipped during report processing. It is highly unusual for an application to make any use of\r
  *  constant data items (as they do not carry any useful data and only occupy limited RAM) however if required defining\r
  *  this switch will put constant data items into the processed HID report structure.\r
  *  in the HID report are skipped during report processing. It is highly unusual for an application to make any use of\r
  *  constant data items (as they do not carry any useful data and only occupy limited RAM) however if required defining\r
  *  this switch will put constant data items into the processed HID report structure.\r


@@ -57,12 +57,12 @@
  *  HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession\r
  *  when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with\r
  *  different usages in a compact manner. This token may be defined to a non-zero value to set the maximum depth of the\r
  *  HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession\r
  *  when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with\r
  *  different usages in a compact manner. This token may be defined to a non-zero value to set the maximum depth of the\r

- *  usage stack, indicating the maximum number of USAGE items which can be stored tempoarily until the next INPUT, OUTPUT\r
+ *  usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT\r

  *  and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation.\r
  *\r
  *  <b>HID_MAX_COLLECTIONS</b> - ( \ref Group_HIDParser ) \n\r
  *  HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information\r
  *  and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation.\r
  *\r
  *  <b>HID_MAX_COLLECTIONS</b> - ( \ref Group_HIDParser ) \n\r
  *  HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information\r

- *  is stored seperately in the processed usage structure (and referred to by the data elements in the structure) to save space.\r
+ *  is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space.\r

  *  This token may be defined to a non-zero value to set the maximum number of COLLECTION items which can be processed by the\r
  *  parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file\r
  *  documentation.\r
  *  This token may be defined to a non-zero value to set the maximum number of COLLECTION items which can be processed by the\r
  *  parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file\r
  *  documentation.\r


@@ -71,8 +71,8 @@
  *  All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID\r
  *  device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which\r
  *  the report data should be interpreted by the host. This token may be defined to a non-zero value to set the maximum number of\r
  *  All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID\r
  *  device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which\r
  *  the report data should be interpreted by the host. This token may be defined to a non-zero value to set the maximum number of\r

- *  data elements which can be stored in the processed HID report strucuture, including INPUT, OUTPUT and (if enabled) FEATURE items.\r
- *  If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed seperately in the\r
+ *  data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items.\r
+ *  If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the\r

  *  processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation.\r
  *\r
  *\r
  *  processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation.\r
  *\r
  *\r


@@ -148,7 +148,7 @@
  *  <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n\r
  *  For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the\r
  *  mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to\r
  *  <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n\r
  *  For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the\r
  *  mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to\r

- *  save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevent on smaller USB AVRs which\r
+ *  save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which\r

  *  do not support host mode.\r
  *\r
  *  <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n\r
  *  do not support host mode.\r
  *\r
  *  <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n\r


@@ -165,5 +165,5 @@
  *  slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is\r
  *  required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_IsConnected global\r
  *  can be accurately set and the USB_Connect and USB_Disconnect events manually raised by the RAISE_EVENT macro. When defined, this token disables\r
  *  slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is\r
  *  required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_IsConnected global\r
  *  can be accurately set and the USB_Connect and USB_Disconnect events manually raised by the RAISE_EVENT macro. When defined, this token disables\r

- *  the library's auto-detection of the connection state by the aformentioned suspension and wake up events.\r
+ *  the library's auto-detection of the connection state by the aforementioned suspension and wake up events.\r

  */\r
  */\r

diff --git a/LUFA/DirectorySummaries.txt b/LUFA/DirectorySummaries.txt
index 5288dbf..f439847 100644 (file)
--- a/LUFA/DirectorySummaries.txt
+++ b/LUFA/DirectorySummaries.txt
@@ -78,7 +78,7 @@
  *  \brief Board hardware driver files.\r
  *  \r
  *  This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from\r
  *  \brief Board hardware driver files.\r
  *  \r
  *  This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from\r

- *  the Atmel corporation. Header files in this folder should be included in user applications requring the functionality of\r
+ *  the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of\r

  *  hardware placed on supported boards.\r
  *\r
  *  \dir Drivers/Board/USBKEY\r
  *  hardware placed on supported boards.\r
  *\r
  *  \dir Drivers/Board/USBKEY\r


@@ -119,7 +119,7 @@
  *  \dir DriverStubs\r
  *  \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.\r
  *  \r
  *  \dir DriverStubs\r
  *  \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.\r
  *  \r

- *  This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardare other than those\r
+ *  This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those\r

  *  directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files\r
  *  copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,\r
  *  the corresponding LUFA board APIs will work correctly with the non-standard board hardware.\r
  *  directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files\r
  *  copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,\r
  *  the corresponding LUFA board APIs will work correctly with the non-standard board hardware.\r

diff --git a/LUFA/GettingStarted.txt b/LUFA/GettingStarted.txt
index 1ff36ec..08fbd1d 100644 (file)
--- a/LUFA/GettingStarted.txt
+++ b/LUFA/GettingStarted.txt
@@ -9,7 +9,7 @@
  *  Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and\r
  *  ultimately build upon for your own projects. All the demos come pre-configured to build and run correctly\r
  *  on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz master clock.\r
  *  Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and\r
  *  ultimately build upon for your own projects. All the demos come pre-configured to build and run correctly\r
  *  on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz master clock.\r

- *  This is due to two reasons; one, it is the hardware the author posesses, and two, it is the most popular Atmel\r
+ *  This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most popular Atmel\r

  *  USB demonstration board to date.\r
  *\r
  *\r
  *  USB demonstration board to date.\r
  *\r
  *\r


@@ -25,10 +25,11 @@
  *  and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project\r
  *  configuration options are located in the "makefile" build script inside each LUFA application's folder, however some\r
  *  demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the\r
  *  and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project\r
  *  configuration options are located in the "makefile" build script inside each LUFA application's folder, however some\r
  *  demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the\r

- *  main .c source file of the project.\r
+ *  main .c source file of the project. See each project's individual documentation for application-specific configuration\r
+ *  values.\r

  *\r
  *  Each project "makefile" contains all the script and configuration data required to compile each project. When opened with\r
  *\r
  *  Each project "makefile" contains all the script and configuration data required to compile each project. When opened with\r

- *  any regular basic text editor such as Notepad or Wordpad (ensure that the save format is a pure ASCII text format) the\r
+ *  any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the\r

  *  build configuration settings may be altered.\r
  *\r
  *  Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For\r
  *  build configuration settings may be altered.\r
  *\r
  *  Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For\r


@@ -67,18 +68,18 @@
  *\r
  *  <b>Note that this value does not actually *alter* the AVR's input clock frequency</b>, it is just a way to indicate to the library the clock frequency\r
  *  of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more\r
  *\r
  *  <b>Note that this value does not actually *alter* the AVR's input clock frequency</b>, it is just a way to indicate to the library the clock frequency\r
  *  of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more\r

- *  library components will ocurr.\r
+ *  library components will occur.\r

  *\r
  *  \subsection SSec_F_CPU The F_CPU Parameter\r
  *  This parameter indicates the target AVR's master CPU clock frequency, in Hz.\r
  *\r
  *  <b>Note that this value does not actually *alter* the AVR's CPU clock frequency</b>, it is just a way to indicate to the library the clock frequency\r
  *  of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more\r
  *\r
  *  \subsection SSec_F_CPU The F_CPU Parameter\r
  *  This parameter indicates the target AVR's master CPU clock frequency, in Hz.\r
  *\r
  *  <b>Note that this value does not actually *alter* the AVR's CPU clock frequency</b>, it is just a way to indicate to the library the clock frequency\r
  *  of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more\r

- *  library components will ocurr.\r
+ *  library components will occur.\r

  *\r
  *  \subsection SSec_CDEFS The CDEFS Parameter\r
  *  Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large\r
  *\r
  *  \subsection SSec_CDEFS The CDEFS Parameter\r
  *  Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large\r

- *  numbers of configuration options remain readable by splitting up groups of options into seperate lines.\r
+ *  numbers of configuration options remain readable by splitting up groups of options into separate lines.\r

  *\r
  *  Normally, these options do not need to be altered to allow an application to compile and run correctly on a different board or AVR to the\r
  *  current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR model and cannot be\r
  *\r
  *  Normally, these options do not need to be altered to allow an application to compile and run correctly on a different board or AVR to the\r
  *  current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR model and cannot be\r


@@ -97,7 +98,7 @@
  *\r
  *  \subsection SSec_CommandLine Via the Command Line\r
  *  To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command line in the directory\r
  *\r
  *  \subsection SSec_CommandLine Via the Command Line\r
  *  To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command line in the directory\r

- *  of interest. To remove compiled files (including the binary output, all intermediatary files and all diagnostic output\r
+ *  of interest. To remove compiled files (including the binary output, all intermediately files and all diagnostic output\r

  *  files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the resulting binary will\r
  *  be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP"\r
  *  file will contain the project's EEPROM data.\r
  *  files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the resulting binary will\r
  *  be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP"\r
  *  file will contain the project's EEPROM data.\r

diff --git a/LUFA/MainPage.txt b/LUFA/MainPage.txt
index 0829aa1..1f18d0f 100644 (file)
--- a/LUFA/MainPage.txt
+++ b/LUFA/MainPage.txt
@@ -88,7 +88,7 @@
  *  The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory.\r
  *  If this directory is missing, please re-download the project from the project homepage.\r
  *\r
  *  The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory.\r
  *  If this directory is missing, please re-download the project from the project homepage.\r
  *\r

- *  Also included with the library are two fully functional bootloaders, loacated in the /Bootloaders/ subdirectory.\r
+ *  Also included with the library are two fully functional bootloaders, located in the /Bootloaders/ subdirectory.\r

  *  The DFU class bootloader is compatible with Atmel's FLIP software or the open source dfu-programmer project, and\r
  *  the CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP.\r
  *\r
  *  The DFU class bootloader is compatible with Atmel's FLIP software or the open source dfu-programmer project, and\r
  *  the CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP.\r
  *\r


@@ -99,4 +99,4 @@
  *  to myself to support this and my future Open Source projects. You can donate any amount via PayPal on my\r
  *  website, http://www.fourwalledcubicle.com . All donations are greatly appreciated.\r
  */\r
  *  to myself to support this and my future Open Source projects. You can donate any amount via PayPal on my\r
  *  website, http://www.fourwalledcubicle.com . All donations are greatly appreciated.\r
  */\r

- 
\ No newline at end of file
+ \r

diff --git a/LUFA/MigrationInformation.txt b/LUFA/MigrationInformation.txt
index dcdbdc2..beb0cb6 100644 (file)
--- a/LUFA/MigrationInformation.txt
+++ b/LUFA/MigrationInformation.txt
@@ -32,7 +32,7 @@
  *      Endpoint_IsOUTReceived() respectively.\r
  *    - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived().\r
  *    - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP().\r
  *      Endpoint_IsOUTReceived() respectively.\r
  *    - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived().\r
  *    - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP().\r

- *    - All endpoint read/write/discard aliases which did not have an explicity endianness specifier (such as Endpoint_Read_Word()) have\r
+ *    - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have\r

  *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.\r
  *\r
  *  <b>Host Mode</b>\r
  *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.\r
  *\r
  *  <b>Host Mode</b>\r


@@ -51,7 +51,7 @@
  *    - The new Pipe_ClearControlSETUP() macro should be used to send CONTROL transactions, rather than the previous Pipe_ClearSetupOUT() macro.\r
  *    - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent().\r
  *    - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed.\r
  *    - The new Pipe_ClearControlSETUP() macro should be used to send CONTROL transactions, rather than the previous Pipe_ClearSetupOUT() macro.\r
  *    - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent().\r
  *    - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed.\r

- *    - All pipe read/write/discard aliases which did not have an explicity endianness specifier (such as Pipe_Read_Word()) have\r
+ *    - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have\r

  *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.\r
  *    - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete().\r
  *    - The Pipe_Ignore_Word() function has been renamed to Pipe_Discard_Word() to remain consistent with the rest of the pipe API.\r
  *      been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.\r
  *    - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete().\r
  *    - The Pipe_Ignore_Word() function has been renamed to Pipe_Discard_Word() to remain consistent with the rest of the pipe API.\r


@@ -196,7 +196,7 @@
  *      and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and\r
  *      USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details.\r
  *    - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated\r
  *      and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and\r
  *      USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details.\r
  *    - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated\r

- *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by pasing\r
+ *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing\r

  *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.\r
  *\r
  *  <b>Host Mode</b>\r
  *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.\r
  *\r
  *  <b>Host Mode</b>\r


@@ -206,7 +206,7 @@
  *      timeout duration in ms.\r
  *    - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures.\r
  *    - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated\r
  *      timeout duration in ms.\r
  *    - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures.\r
  *    - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated\r

- *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by pasing\r
+ *      to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing\r

  *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.\r
  *\r
  *\r
  *      the token NO_STREAM_CALLBACKS to the compiler using the -D switch.\r
  *\r
  *\r


@@ -243,7 +243,7 @@
  *      avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing\r
  *      projects should at least manually correct the BCD version numbers, or preferably update the descriptors to\r
  *      encode the version number in BCD format using the new macro.\r
  *      avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing\r
  *      projects should at least manually correct the BCD version numbers, or preferably update the descriptors to\r
  *      encode the version number in BCD format using the new macro.\r

- *    - The mandatory GetReport class-specific request was accidentally ommitted from previous versions of the demos\r
+ *    - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos\r

  *      based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the\r
  *      HID demos should also be updated accordingly.\r
  *    - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission.\r
  *      based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the\r
  *      HID demos should also be updated accordingly.\r
  *    - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission.\r


@@ -271,13 +271,13 @@
  *      appropriate. It fires in an identical manner to the previously named event, thus the only change to be made\r
  *      is the event name itself in the user project.\r
  *    - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a\r
  *      appropriate. It fires in an identical manner to the previously named event, thus the only change to be made\r
  *      is the event name itself in the user project.\r
  *    - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a\r

- *      psudo-descriptor modelled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type\r
+ *      pseudo-descriptor modelled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type\r

  *      descriptor as indicated in the USB specification, thus all device code must be updated accordingly.\r
  *      descriptor as indicated in the USB specification, thus all device code must be updated accordingly.\r

- *    - The names of several Endpoint macros have been changed to be more consistant with the rest of the library,\r
+ *    - The names of several Endpoint macros have been changed to be more consistent with the rest of the library,\r

  *      with no implementation changes. This means that existing code can be altered to use the new macro names\r
  *      with no other considerations required. See Endpoint.h for the new macro names.\r
  *    - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t\r
  *      with no implementation changes. This means that existing code can be altered to use the new macro names\r
  *      with no other considerations required. See Endpoint.h for the new macro names.\r
  *    - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t\r

- *      strucuture named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this\r
+ *      structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this\r

  *      demo should correct the structure value to maintain compatibility across multiple OS platforms.\r
  *    - By default, the descriptor structures use the official USB specification names for the elements. Previous\r
  *      versions of the library used non-standard (but more verbose) names, which are still usable in the current\r
  *      demo should correct the structure value to maintain compatibility across multiple OS platforms.\r
  *    - By default, the descriptor structures use the official USB specification names for the elements. Previous\r
  *      versions of the library used non-standard (but more verbose) names, which are still usable in the current\r


@@ -288,7 +288,7 @@
  *    - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its\r
  *      members renamed to the official USB specification names for requests. Existing code will need to be updated\r
  *      to use the new names.\r
  *    - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its\r
  *      members renamed to the official USB specification names for requests. Existing code will need to be updated\r
  *      to use the new names.\r

- *    - The names of several Pipe macros have been changed to be more consistant with the rest of the library,\r
+ *    - The names of several Pipe macros have been changed to be more consistent with the rest of the library,\r

  *      with no implementation changes. This means that existing code can be altered to use the new macro names\r
  *      with no other considerations required. See Pipe.h for the new macro names.\r
  *    - By default, the descriptor structures use the official USB specification names for the elements. Previous\r
  *      with no implementation changes. This means that existing code can be altered to use the new macro names\r
  *      with no other considerations required. See Pipe.h for the new macro names.\r
  *    - By default, the descriptor structures use the official USB specification names for the elements. Previous\r


@@ -304,5 +304,5 @@
  *      header inside the library.\r
  *    - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has\r
  *      finished enumerating the device. Projects relying on the event only firing in Host mode should be updated\r
  *      header inside the library.\r
  *    - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has\r
  *      finished enumerating the device. Projects relying on the event only firing in Host mode should be updated\r

- *      so that the event action only ocurrs when the USB_Mode global is set to USB_MODE_HOST.\r
+ *      so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST.\r

  */\r
  */\r

diff --git a/LUFA/SchedulerOverview.txt b/LUFA/SchedulerOverview.txt
index 0a4f492..5c031fe 100644 (file)
--- a/LUFA/SchedulerOverview.txt
+++ b/LUFA/SchedulerOverview.txt
@@ -15,7 +15,7 @@
  *  hogs the processor, preventing another from running before some sort of timeout is exceeded). Unlike normal RTOS\r
  *  tasks, each LUFA scheduler task is a regular function, and thus must be designed to be called, and designed to\r
  *  return to the calling scheduler function repeatedly. Data which must be preserved between task calls should be\r
  *  hogs the processor, preventing another from running before some sort of timeout is exceeded). Unlike normal RTOS\r
  *  tasks, each LUFA scheduler task is a regular function, and thus must be designed to be called, and designed to\r
  *  return to the calling scheduler function repeatedly. Data which must be preserved between task calls should be\r

- *  declared as global or (prefferably) as a static local variable inside the task.\r
+ *  declared as global or (preferably) as a static local variable inside the task.\r

  *\r
  *  The scheduler consists of a task list, listing all the tasks which can be executed by the scheduler. Once started,\r
  *  each task is then called one after another, unless the task is stopped by another running task or interrupt.\r
  *\r
  *  The scheduler consists of a task list, listing all the tasks which can be executed by the scheduler. Once started,\r
  *  each task is then called one after another, unless the task is stopped by another running task or interrupt.\r

diff --git a/LUFA/WritingBoardDrivers.txt b/LUFA/WritingBoardDrivers.txt
index 0d0e74d..cf4f47c 100644 (file)
--- a/LUFA/WritingBoardDrivers.txt
+++ b/LUFA/WritingBoardDrivers.txt
@@ -13,7 +13,7 @@
  *  passed to the compiler, with a constant of BOARD_{Name}. For example <b>-DBOARD=BOARD_USBKEY</b> instructs the\r
  *  compiler to use the USBKEY board hardware drivers.\r
  *\r
  *  passed to the compiler, with a constant of BOARD_{Name}. For example <b>-DBOARD=BOARD_USBKEY</b> instructs the\r
  *  compiler to use the USBKEY board hardware drivers.\r
  *\r

- *  If your application does not use *any* board level drivers, you can ommit the definition of the BOARD macro.\r
+ *  If your application does not use *any* board level drivers, you can omit the definition of the BOARD macro.\r

  *  However, some users may wish to write their own custom board hardware drivers which are to remain compatible\r
  *  with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates\r
  *  that the board level drivers should be located in a folder named "Board" located inside the application's folder.\r
  *  However, some users may wish to write their own custom board hardware drivers which are to remain compatible\r
  *  with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates\r
  *  that the board level drivers should be located in a folder named "Board" located inside the application's folder.\r

diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt
index af95650..a0e600e 100644 (file)
--- a/Projects/Magstripe/Magstripe.txt
+++ b/Projects/Magstripe/Magstripe.txt
@@ -42,7 +42,7 @@
  *  See http://ossguy.com/ss_usb/ for the USB reader hardware project website,\r
  *  including construction and support details.\r
  * \r
  *  See http://ossguy.com/ss_usb/ for the USB reader hardware project website,\r
  *  including construction and support details.\r
  * \r

- *  To use, connect your magentic card reader device to the USB AVR as follows (pin and port mapping may be adjusted\r
+ *  To use, connect your magnetic card reader device to the USB AVR as follows (pin and port mapping may be adjusted\r

  *  from the project makefile):\r
  * \r
  *  <table>\r
  *  from the project makefile):\r
  * \r
  *  <table>\r


@@ -104,4 +104,4 @@
  *    <td>Gives the maximum number of bits per track which can be buffered by the device for later transmission to a host.</td>\r
  *   </tr>\r
  *  </table>\r
  *    <td>Gives the maximum number of bits per track which can be buffered by the device for later transmission to a host.</td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r