Add basic hardware mapping information for all supported boards.

diff --git a/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h b/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h
index 3fca656..f13b756 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Adafruit U4 Breakout board (http://ladyada.net/products/atmega32u4breakout).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTE.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h
index adec49a..c7cce17 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel ATAVRUSBRF01.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h
index 77fc05b..06dcada 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h
@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Atmel ATAVRUSBRF01.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>RX LED</td><td>High</td><td>PORTD.0</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>TX LED</td><td>High</td><td>PORTD.1</td></tr>
+ *  </table>
+ *
  *  @{
  */
 
@@ -61,15 +67,6 @@
                        #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
                #endif
 
-       /* Private Interface - For use in library only: */
-       #if !defined(__DOXYGEN__)
-               /* Macros: */
-                       #define LEDS_PORTD_LEDS       (LEDS_LED1 | LEDS_LED2)
-                       #define LEDS_PORTE_LEDS       (LEDS_LED3 | LEDS_LED4)
-
-                       #define LEDS_PORTE_MASK_SHIFT 4
-       #endif
-
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** LED mask for the first LED on the board. */

diff --git a/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h b/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h
index a7ce1b5..800fa15 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h b/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h
index 6e7de07..429f33e 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h
@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>TX LED</td><td>Low</td><td>PORTC.7</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>RX LED</td><td>Low</td><td>PORTC.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h b/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h
index 77b7d97..4c74961 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h
@@ -42,6 +42,13 @@
  *\r
  *  Board specific LED driver header for the Bitwizard Big-Multio (http://www.bitwizard.nl/wiki/index.php/Usbbigmultio).\r
  *\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTF.6</td></tr>\r
+ *    <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTF.7</td></tr>\r
+ *    <tr><td>LEDS_LED3</td><td>Unknown</td><td>LED2</td><td>High</td><td>PORTE.2</td></tr>\r
+ *  </table>\r
+ *\r
  *  @{\r
  */\r
 \r

diff --git a/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h b/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h
index 4313db5..7bfef87 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h
@@ -40,7 +40,13 @@
  *  \defgroup Group_LEDs_BLACKCAT BLACKCAT
  *  \brief Board specific LED driver header for the BLACKCAT USB JTAG.
  *
- *  Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB/.
+ *  Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB).
+ *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTD.3</td></tr>
+ *  </table>
  *
  *  @{
  */

diff --git a/LUFA/Drivers/Board/AVR8/BUI/LEDs.h b/LUFA/Drivers/Board/AVR8/BUI/LEDs.h
index f49f51d..043a2a7 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BUI/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/BUI/LEDs.h
@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for the Busware BUI (http://www.busware.de/tiki-index.php?page=BUI).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>RGB LED</td><td>High</td><td>PORTC.2</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>RGB LED</td><td>High</td><td>PORTC.3</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Blue</td><td>RGB LED</td><td>High</td><td>PORTC.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h
index 8fdd002..a4d8169 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h
@@ -44,6 +44,11 @@
  *  third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral
  *  layout for buttons, LEDs and a Joystick.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h
index f952536..6b0df05 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h
+++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h
@@ -44,6 +44,11 @@
  *  third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral
  *  layout for buttons, LEDs and a Joystick.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTD.2</td><td>PORTD.3</td><td>PORTD.0</td><td>PORTD.1</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h
index 9f82cc1..24a1fb2 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h
@@ -44,6 +44,14 @@
  *  third-party board does not include any on-board peripherals, but does have an officially recommended external
  *  peripheral layout for buttons, LEDs and a Joystick.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h b/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h
index 19e09fe..16feb7d 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h b/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h
index 3fb8c87..8888a05 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>High</td><td>PORTE.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h b/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h
index 89ba274..829f356 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
index 595492f..0f7b674 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Dataflash driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB321C (4MB)</td><td>PORTE.6</td><td>SPI0</td></tr>
+ *  </table> 
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h b/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h
index 5315c2e..b264f47 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h
+++ b/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h
@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTF.4</td><td>PORTF.5</td><td>PORTF.7</td><td>PORTC.6</td><td>PORTF.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h b/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h
index 551bba6..ade2b26 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h
@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for the Atmel EVK527.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h b/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h
index a3a246d..d36a115 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h b/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h
index 3361f58..6c49341 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h b/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h
index 45ca124..460c94e 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h
@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Maximus (http://www.avrusb.com/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>LG</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>LR</td><td>High</td><td>PORTB.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h
index 5c5825a..731d1b0 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h
@@ -100,6 +100,18 @@
  *\r
  *  Board specific Buttons driver header for the Micropendous 32U2 (https://code.google.com/p/micropendous/wiki/Micropendous_32U2).\r
  *\r
+ *  <b>BOARD_MICROPENDOUS_1 and BOARD_MICROPENDOUS_32U2</b>:\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>\r
+ *  </table>\r
+ *\r
+ *  <b>Other Revisions</b>:\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>\r
+ *  </table>\r
+ *\r
  *  @{\r
  */\r
 \r

diff --git a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h
index 649d961..71a8049 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h
@@ -56,6 +56,18 @@
  *
  *  Board specific LED driver header for the Micropendous 32U2 (https://code.google.com/p/micropendous/wiki/Micropendous_32U2).
  *
+ *  <b>BOARD_MICROPENDOUS_32U2</b>:
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
+ *  </table>
+ *
+ *  <b>Other Revisions</b>:
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTB.1</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h b/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h
index 27d75bf..3105ba8 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Microsin AVR-USB162 board (http://microsin.ru/content/view/685/44/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h b/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h
index 36f610d..8b28d30 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Microsin AVR-USB162 board (http://microsin.ru/content/view/685/44/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h b/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h
index 016ea2d..f8666cf 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the MINIMUS.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h b/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h
index 11ab648..c689a31 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h
@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for the Minimus USB (http://www.minimususb.com/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>General Indicator</td><td>Low</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Blue</td><td>General Indicator</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 
@@ -69,11 +76,14 @@
                        /** LED mask for the second LED on the board. */
                        #define LEDS_LED2        (1 << 6)
 
+                       /** LED mask for the third LED on the board. */
+                       #define LEDS_LED3        (1 << 7)
+
                        /** LED mask for all the LEDs on the board. */
-                       #define LEDS_ALL_LEDS    (LEDS_LED1 | LEDS_LED2)
+                       #define LEDS_ALL_LEDS    (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
 
                        /** LED mask for the none of the board LEDs. */
-                       #define LEDS_NO_LEDS     1
+                       #define LEDS_NO_LEDS     0
 
                /* Inline Functions: */
                #if !defined(__DOXYGEN__)

diff --git a/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h b/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h
index af2f7b3..c5f07b9 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h
@@ -42,6 +42,13 @@
  *\r
  *  Board specific LED driver header for the Bitwizard Multio (http://www.bitwizard.nl/wiki/index.php/USB-multio).\r
  *\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.0</td></tr>\r
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTC.2</td></tr>\r
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>\r
+ *  </table>\r
+ *\r
  *  @{\r
  */\r
 \r

diff --git a/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h b/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h
index b6d75be..1b7c291 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Olimex AVR-USB-162 Development Board (http://www.olimex.com/dev/avr-usb-162.html).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h b/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h
index c9bd3f1..cc34daa 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Olimex AVR-USB-162 (http://www.olimex.com/dev/avr-usb-162.html).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h b/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h
index c85d8ad..3bc45b9 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel RZUSBSTICK.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Blue</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>General Indicator</td><td>Low</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTE.6</td></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>Low</td><td>PORTE.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h b/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h
index 8985306..a838bed 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Sparkfun ATMEGA8U2 breakout board (http://www.sparkfun.com/products/10277).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTB.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK525/Buttons.h b/LUFA/Drivers/Board/AVR8/STK525/Buttons.h
index 13abb83..a08fa5d 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK525/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/STK525/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel STK525.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
index 6774297..60375f9 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Dataflash driver header for the Atmel STK525.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB321C (4MB)</td><td>PORTB.4</td><td>SPI0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK525/Joystick.h b/LUFA/Drivers/Board/AVR8/STK525/Joystick.h
index 8cc5653..fb6c857 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK525/Joystick.h
+++ b/LUFA/Drivers/Board/AVR8/STK525/Joystick.h
@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel STK525.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTB.6</td><td>PORTB.7</td><td>PORTE.4</td><td>PORTE.5</td><td>PORTB.5</td></tr>
+ *  </table>
+ *
  *  @{
  */
 
@@ -76,7 +81,7 @@
                        #define JOY_LEFT                  (1 << 6)
 
                        /** Mask for the joystick being pushed in the right direction. */
-                       #define JOY_RIGHT                ((1 << 4) >> 1)
+                       #define JOY_RIGHT                ((1 << 4) >> JOY_PORTE_MASK_SHIFT)
 
                        /** Mask for the joystick being pushed in the upward direction. */
                        #define JOY_UP                    (1 << 7)

diff --git a/LUFA/Drivers/Board/AVR8/STK525/LEDs.h b/LUFA/Drivers/Board/AVR8/STK525/LEDs.h
index c0111a2..881010c 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK525/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/STK525/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel STK525.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK526/Buttons.h b/LUFA/Drivers/Board/AVR8/STK526/Buttons.h
index 2c6b928..13ec376 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK526/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/STK526/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel STK526.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
index ce20ff1..d58ad05 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Dataflash driver header for the Atmel STK525.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTC.2</td><td>SPI0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK526/Joystick.h b/LUFA/Drivers/Board/AVR8/STK526/Joystick.h
index 3ab6e84..823fbf1 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK526/Joystick.h
+++ b/LUFA/Drivers/Board/AVR8/STK526/Joystick.h
@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel STK526.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTB.4</td><td>PORTB.5</td><td>PORTB.6</td><td>PORTB.7</td><td>PORTB.0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/STK526/LEDs.h b/LUFA/Drivers/Board/AVR8/STK526/LEDs.h
index ed83356..b19abdc 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/STK526/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/STK526/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel STK526.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.1</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.0</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h b/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h
index 9a71cf5..f3a577a 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h
@@ -51,6 +51,18 @@
  *
  *  Board specific LED driver header for the PJRC Teensy boards (http://www.pjrc.com/teensy/index.html).
  *
+ *  <b>TEENSY</b>:
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
+ *  </table>
+ *
+ *  <b>TEENSY2</b>:
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/TUL/Buttons.h b/LUFA/Drivers/Board/AVR8/TUL/Buttons.h
index 3eed13a..76c9d85 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/TUL/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/TUL/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Busware TUL (http://www.busware.de/tiki-index.php?page=TUL).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/TUL/LEDs.h b/LUFA/Drivers/Board/AVR8/TUL/LEDs.h
index 121f3f4..82ccb0f 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/TUL/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/TUL/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Busware TUL (http://www.busware.de/tiki-index.php?page=TUL).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTF.0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h b/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h
index b078364..3df6bac 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Linnix UDIP (http://linnix.com/udip/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h b/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h
index 30eb9ad..83cb1fb 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Linnix UDIP (http://linnix.com/udip/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Red</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>Bicolor Indicator 2</td><td>High</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Red</td><td>Bicolor Indicator 2</td><td>High</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/UNO/LEDs.h b/LUFA/Drivers/Board/AVR8/UNO/LEDs.h
index 1fddba7..5ffafdd 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/UNO/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/UNO/LEDs.h
@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Arduino Uno (http://arduino.cc/en/Main/ArduinoBoardUno).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>RX</td><td>Low</td><td>PORTD.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Yellow</td><td>TX</td><td>Low</td><td>PORTD.5</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h b/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h
index 9b83acf..73d05a5 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h
@@ -51,6 +51,11 @@
  *\r
  *  Board specific Buttons driver header for the Paranoid Studio USB2AX (http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX).\r
  *\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>\r
+ *  </table>\r
+ *\r
  *  @{\r
  */\r
 \r

diff --git a/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h b/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h
index c34715e..cec18c4 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h
@@ -51,6 +51,18 @@
  *\r
  *  Board specific LED driver header for the Paranoid Studio USB2AX (http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX).\r
  *\r
+ *  <b>USB2AX</b>:\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTC.6</td></tr>\r
+ *  </table>\r
+ *\r
+ *  <b>USB2AX_V3</b>:\r
+ *  <table>\r
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>\r
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.1</td></tr>\r
+ *  </table>\r
+ *\r
  *  @{\r
  */\r
 \r

diff --git a/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h b/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h
index d03918c..111f7ec 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Kernel Concepts USBFOO (http://shop.kernelconcepts.de/product_info.php?products_id=102).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h b/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h
index f838983..810be72 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h
@@ -42,6 +42,11 @@
  *
  *  Board specific LED driver header for the Kernel Concepts USBFOO (http://shop.kernelconcepts.de/product_info.php?products_id=102).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.4</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h b/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h
index 3180725..9399f4f 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel USBKEY.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
index 5b71d7d..32f7ff9 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h
@@ -42,6 +42,12 @@
  *
  *  Board specific Dataflash driver header for the Atmel USBKEY board.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTE.0</td><td>SPI0</td></tr>
+ *    <tr><td>DATAFLASH_CHIP2</td><td>AT45DB642D (8MB)</td><td>PORTE.1</td><td>SPI0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h b/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h
index 8b6935b..4136f79 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h
+++ b/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h
@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel USBKEY.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>PORTB.6</td><td>PORTB.7</td><td>PORTE.4</td><td>PORTE.5</td><td>PORTB.5</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h b/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h
index 4ca7691..62c0d76 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel USBKEY.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>Bicolor Indicator 1</td><td>Low</td><td>PORTD.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>Bicolor Indicator 1</td><td>Low</td><td>PORTD.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Red</td><td>Bicolor Indicator 2</td><td>Low</td><td>PORTD.6</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>Bicolor Indicator 2</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h b/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h
index 6a6d78c..7313db2 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h
+++ b/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for Tom's USBTINY MKII (http://tom-itx.dyndns.org:81/~webpage/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h b/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h
index 0fcbf07..9322ab9 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h
@@ -42,6 +42,13 @@
  *
  *  Board specific LED driver header for Tom's USBTINY MKII (http://tom-itx.dyndns.org:81/~webpage/).
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Red</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.7</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Red</td><td>Target Power</td><td>High</td><td>PORTB.5</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
index c9bdbdc..9647cc1 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
+++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h
@@ -51,6 +51,18 @@
  *
  *  Board specific Dataflash driver header for the Atmel XPLAIN.
  *
+ *  <b>Revision 1 Boards</b>:
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB041D (512KB)</td><td>PORTB.5</td><td>SPI0</td></tr>
+ *  </table>
+ *
+ *  <b>Other Board Revisions</b>:
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTB.5</td><td>SPI0</td></tr>
+ *  </table>
+ *
  *  @{
  */
 
@@ -59,6 +71,7 @@
 
        /* Includes: */
                #include "../../../../Common/Common.h"
+               
                #include "../../../Misc/AT45DB642D.h"
                #include "../../../Peripheral/SPI.h"
 

diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h b/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h
index 9381548..ef36e17 100644 (file)
--- a/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h
+++ b/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h
@@ -49,6 +49,11 @@
  *
  *  Board specific LED driver header for the Atmel XPLAIN.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTB.6</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h b/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h
index e1b34b1..a5a0fd6 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h
+++ b/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h
@@ -42,6 +42,13 @@
  *
  *  Board specific Buttons driver header for the Atmel EVK1100.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>GPIO88</td></tr>
+ *    <tr><td>BUTTONS_BUTTON2</td><td>SW1 Button</td><td>Low</td><td>GPIO85</td></tr>
+ *    <tr><td>BUTTONS_BUTTON3</td><td>SW2 Button</td><td>Low</td><td>GPIO82</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h b/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h
index b9dbfbc..256da60 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h
+++ b/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h
@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel EVK1100.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>GPIO25</td><td>GPIO26</td><td>GPIO28</td><td>GPIO27</td><td>GPIO20</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h b/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h
index 43c3ecb..4663baf 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h
+++ b/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h
@@ -42,6 +42,18 @@
  *
  *  Board specific LED driver header for the Atmel EVK1100.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>LED0 LED</td><td>Low</td><td>GPIO51</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>LED1 LED</td><td>Low</td><td>GPIO52</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>LED2 LED</td><td>Low</td><td>GPIO53</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>LED3 LED</td><td>Low</td><td>GPIO54</td></tr>
+ *    <tr><td>LEDS_LED5</td><td>Green</td><td>LED4 LED</td><td>Low</td><td>GPIO59</td></tr>
+ *    <tr><td>LEDS_LED6</td><td>Green</td><td>LED5 LED</td><td>Low</td><td>GPIO60</td></tr>
+ *    <tr><td>LEDS_LED7</td><td>Green</td><td>LED6 LED</td><td>Low</td><td>GPIO61</td></tr>
+ *    <tr><td>LEDS_LED8</td><td>Green</td><td>LED7 LED</td><td>Low</td><td>GPIO62</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h b/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h
index 2e89af4..8971479 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h
+++ b/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h
@@ -42,6 +42,12 @@
  *
  *  Board specific Buttons driver header for the Atmel EVK1101.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>GPIO34</td></tr>
+ *    <tr><td>BUTTONS_BUTTON2</td><td>SW1 Button</td><td>Low</td><td>GPIO35</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h b/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h
index 9983374..7850bfb 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h
+++ b/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h
@@ -42,6 +42,11 @@
  *
  *  Board specific joystick driver header for the Atmel EVK1101.
  *
+ *  <table>
+ *    <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
+ *    <tr><td>GPIO38</td><td>GPIO39</td><td>GPIO41</td><td>GPIO40</td><td>GPIO13</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h b/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h
index 43f3949..79a95b7 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h
+++ b/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel EVK1101.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>LED0 LED</td><td>Low</td><td>GPIO7</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>LED1 LED</td><td>Low</td><td>GPIO8</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>LED2 LED</td><td>Low</td><td>GPIO21</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>LED3 LED</td><td>Low</td><td>GPIO22</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h b/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h
index af8246d..d255c0a 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h
+++ b/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Buttons driver header for the Atmel EVK1104.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>GPIO42</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h b/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h
index 1f5863b..e1caf19 100644 (file)
--- a/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h
+++ b/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h
@@ -42,6 +42,14 @@
  *
  *  Board specific LED driver header for the Atmel EVK1104.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Green</td><td>LED0 LED</td><td>Low</td><td>GPIO67</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Green</td><td>LED1 LED</td><td>Low</td><td>GPIO101</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Green</td><td>LED2 LED</td><td>Low</td><td>GPIO102</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Green</td><td>LED3 LED</td><td>Low</td><td>GPIO105</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h
index d4e2084..8146ee3 100644 (file)
--- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h
+++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h
@@ -42,6 +42,13 @@
  *
  *  Board specific Buttons driver header for the Atmel XMEGA A3BU Xplained.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>PORTE.5</td></tr>
+ *    <tr><td>BUTTONS_BUTTON2</td><td>SW1 Button</td><td>Low</td><td>PORTF.1</td></tr>
+ *    <tr><td>BUTTONS_BUTTON3</td><td>SW2 Button</td><td>Low</td><td>PORTF.2</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h
index df35761..672d4eb 100644 (file)
--- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h
+++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Dataflash driver header for the Atmel XMEGA B1 Xplained board.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTF.4</td><td>USARTD0 (In SPI Mode)</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h
index 6212c9a..b47199b 100644 (file)
--- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h
+++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h
@@ -42,6 +42,12 @@
  *
  *  Board specific LED driver header for the Atmel XMEGA A3BU Xplained.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>LED0 LED</td><td>Low</td><td>PORTR.0</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Yellow</td><td>LED1 LED</td><td>Low</td><td>PORTR.1</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h
index 2a08ed5..0e09832 100644 (file)
--- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h
+++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h
@@ -42,6 +42,14 @@
  *
  *  Board specific Buttons driver header for the Atmel XMEGA B1 Xplained.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>BUTTONS_BUTTON1</td><td>Touch CS0 Button</td><td>Low</td><td>PORTE.0</td></tr>
+ *    <tr><td>BUTTONS_BUTTON2</td><td>Touch CS1 Button</td><td>Low</td><td>PORTE.1</td></tr>
+ *    <tr><td>BUTTONS_BUTTON3</td><td>Touch CS2 Button</td><td>Low</td><td>PORTE.2</td></tr>
+ *    <tr><td>BUTTONS_BUTTON4</td><td>Touch CS3 Button</td><td>Low</td><td>PORTE.3</td></tr>
+ *  </table>
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h
index 0b8a261..d7ad64a 100644 (file)
--- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h
+++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h
@@ -42,6 +42,11 @@
  *
  *  Board specific Dataflash driver header for the Atmel XMEGA A3BU Xplained board.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
+ *    <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTD.2</td><td>USARTC0 (In SPI Mode, Remapped)</td></tr>
+ *  </table> 
+ *
  *  @{
  */
 

diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h
index 1849787..54a678e 100644 (file)
--- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h
+++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h
@@ -42,6 +42,15 @@
  *
  *  Board specific LED driver header for the Atmel XMEGA B1 Xplained.
  *
+ *  <table>
+ *    <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
+ *    <tr><td>LEDS_LED1</td><td>Yellow</td><td>LED0 LED</td><td>High</td><td>PORTB.4</td></tr>
+ *    <tr><td>LEDS_LED2</td><td>Yellow</td><td>LED1 LED</td><td>High</td><td>PORTB.5</td></tr>
+ *    <tr><td>LEDS_LED3</td><td>Yellow</td><td>LED2 LED</td><td>High</td><td>PORTB.6</td></tr>
+ *    <tr><td>LEDS_LED4</td><td>Yellow</td><td>LED3 LED</td><td>High</td><td>PORTB.7</td></tr>
+ *    <tr><td>LEDS_LED5</td><td>Green</td><td>USB LED</td><td>Low</td><td>PORTE.4</td></tr>
+ *  </table>
+ *
  *  @{
  */