*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retreived data.
+ * to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retreived data.
+ * to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retreived data.
+ * to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retreived data.
+ * to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
static uint8_t NextResponseBuffer[64];
/** Indicates the length of the next response to send */
-static uint8_t NextReponseLen;
+static uint8_t NextResponseLen;
/** Main program entry point. This routine contains the overall program flow, including initial
* setup of all components and the main program loop.
if (strncmp((char*)Data, "*IDN?", 5) == 0)
strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
- NextReponseLen = strlen((char*)NextResponseBuffer);
+ NextResponseLen = strlen((char*)NextResponseBuffer);
}
uint8_t GetNextMessage(uint8_t* const Data)
{
strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
- NextReponseLen = strlen((char*)NextResponseBuffer);
+ NextResponseLen = strlen((char*)NextResponseBuffer);
// ---
- uint8_t DataLen = MIN(NextReponseLen, 64);
+ uint8_t DataLen = MIN(NextResponseLen, 64);
strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen);
/** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
* LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
* endpoint, the processing code is placed here to avoid duplicating it and potentially having different
- * behaviour depending on the method used to sent it.
+ * behavior depending on the method used to sent it.
*/
void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
{
}
/** Task to manage an enumerated USB MIDI device once connected, to display received
- * note events from the host and send note changes in response to tbe board's joystick.
+ * note events from the host and send note changes in response to the board's joystick.
*/
void JoystickHost_Task(void)
{
/** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
* readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this
- * command completes sucessfuly.
+ * command completes successfully.
*
* \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
*/
#if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__)
#if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
/** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging
- * interface after is has been disbled in software via \ref JTAG_DISABLE().
+ * interface after is has been disabled in software via \ref JTAG_DISABLE().
*
* \note This macro is not available for all architectures.
*/
/** Forces the compiler to not automatically zero the given global variable on startup, so that the
* current RAM contents is retained. Under most conditions this value will be random due to the
- * behaviour of volatile memory once power is removed, but may be used in some specific circumstances,
+ * behavior of volatile memory once power is removed, but may be used in some specific circumstances,
* like the passing of values back after a system watchdog reset.
*/
#define ATTR_NO_INIT __attribute__ ((section (".noinit")))
*/
static inline void Buttons_Init(void);
- /** Disables the buttons driver, releasing the I/O pins back to their default high-impedence input mode. */
+ /** Disables the buttons driver, releasing the I/O pins back to their default high-impedance input mode. */
static inline void Buttons_Disable(void);
/** Returns a mask indicating which board buttons are currently pressed.
*/
static inline void Joystick_Init(void);
- /** Disables the joystick driver, releasing the I/O pins back to their default high-impedence input mode. */
+ /** Disables the joystick driver, releasing the I/O pins back to their default high-impedance input mode. */
static inline void Joystick_Disable(void);
/** Returns the current status of the joystick, as a mask indicating the direction the joystick is
*
* \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
* a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
+ * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
* switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
* a non-existing LED is referenced in application code. Note that this means that it is possible to make
* compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
*/
static inline void LEDs_Init(void);
- /** Disables the board LED driver, releasing the I/O pins back to their default high-impedence input mode. */
+ /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
static inline void LEDs_Disable(void);
/** Turns on the LEDs specified in the given LED mask.
#define ADC_INT_TEMP_SENS ((1 << 8) | (0x07 << MUX0))
#endif
- /** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
+ /** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
#define ADC_1100MV_BANDGAP (0x1E << MUX0)
/** Retrieves the ADC MUX mask for the given ADC channel number.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retreived data.
+ * to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
*
* When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
* the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retreived data.
+ * to indicate the size of the retrieved data.
*
* \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
* of the \c DataLength parameter.
/** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the
- * \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events.
+ * \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events.
*
* \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
*
*\r
* \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state.\r
*\r
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occured..\r
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occurred..\r
*/\r
uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
\r
\r
/** @} */\r
\r
-
+\r
uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate
- * at which the device should send a report, when no state changes have ocurred; i.e. on HID keyboards, this sets the
+ * at which the device should send a report, when no state changes have occurred; i.e. on HID keyboards, this sets the
* hardware key repeat interval.
*
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the
- * \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the
+ * \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the
* pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI
* events to be packed into a single pipe packet, increasing data throughput.
*
* from the \ref USB_Modes_t enum.
*
* \param[in] Options Mask indicating the options which should be used when initializing the USB
- * interface to control the USB interface's behaviour. This should be comprised of
+ * interface to control the USB interface's behavior. This should be comprised of
* a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
* PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
* mode speed.
* function. The routine updates the position and remaining configuration descriptor bytes values
* automatically. If a comparator routine fails a search, the descriptor pointer is retreated back
* so that the next descriptor search invocation will start from the descriptor which first caused the
- * original search to fail. This behaviour allows for one comparator to be used immediately after another
+ * original search to fail. This behavior allows for one comparator to be used immediately after another
* has failed, starting the second search from the descriptor which failed the first.
*
* Comparator functions should be standard functions which accept a pointer to the header of the current
* \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
* this means that the current connection state is derived from the bus suspension and wake up events by default,
* which is not always accurate (host may suspend the bus while still connected). If the actual connection state
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+ * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
* passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
* and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
* \n\n
* \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
* this means that the current connection state is derived from the bus suspension and wake up events by default,
* which is not always accurate (host may suspend the bus while still connected). If the actual connection state
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+ * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
* passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
* and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
* \n\n
/* Global Variables: */
/** Indicates the currently set configuration number of the attached device. This indicates the currently
- * selected configuration value if one has been set sucessfully, or 0 if no configuration has been selected.
+ * selected configuration value if one has been set successfully, or 0 if no configuration has been selected.
*
* To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function.
*
/** \name USB Configuration Descriptor Attribute Masks */
//@{
/** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all
- * devices for historial purposes.
+ * devices for historical purposes.
*/
#define USB_CONFIG_ATTR_RESERVED 0x80
* from the \ref USB_Modes_t enum.
*
* \param[in] Options Mask indicating the options which should be used when initializing the USB
- * interface to control the USB interface's behaviour. This should be comprised of
+ * interface to control the USB interface's behavior. This should be comprised of
* a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
* PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
* mode speed.
* from the \ref USB_Modes_t enum.
*
* \param[in] Options Mask indicating the options which should be used when initializing the USB
- * interface to control the USB interface's behaviour. This should be comprised of
+ * interface to control the USB interface's behavior. This should be comprised of
* a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
* PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
* mode speed.
* management.
*
* User code may choose to either include this master dispatch header file to include all available platform
- * driver header files for the current achitecture, or may choose to only include the specific platform driver
+ * driver header files for the current architecture, or may choose to only include the specific platform driver
* modules required for a particular application.
*/
* system functions such as clock control and interrupt management.
*
* User code may choose to either include this master dispatch header file to include all available platform
- * driver header files for the current achitecture, or may choose to only include the specific platform driver
+ * driver header files for the current architecture, or may choose to only include the specific platform driver
* modules required for a particular application.
*
* \note The exact APIs and availability of sub-modules within the platform driver group may vary depending on the
EXOSC_MODE_8MHZ_OR_MORE = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3, /**< External crystal oscillator equal to or faster than 8MHz. */
};
- /** Enum for the possible external oscillator statup times. */
+ /** Enum for the possible external oscillator startup times. */
enum UC3_Extern_OSC_ClockStartup_t
{
EXOSC_START_0CLK = AVR32_PM_OSCCTRL0_STARTUP_0_RCOSC, /**< Immediate startup, no delay. */
- EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cyles before startup for stability. */
- EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cyles before startup for stability. */
- EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cyles before startup for stability. */
- EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cyles before startup for stability. */
- EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cyles before startup for stability. */
- EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cyles before startup for stability. */
+ EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cycles before startup for stability. */
+ EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cycles before startup for stability. */
+ EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cycles before startup for stability. */
+ EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cycles before startup for stability. */
+ EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cycles before startup for stability. */
+ EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cycles before startup for stability. */
};
/** Enum for the possible module clock sources. */
/* Public Interface - May be used in end-application: */
/* Macros: */
- /** Converts a given interrupt index into its assocated interrupt group.
+ /** Converts a given interrupt index into its associated interrupt group.
*
* \param[in] IRQIndex Index of the interrupt request to convert.
*
*/
#define INTC_IRQ_GROUP(IRQIndex) (IRQIndex / 32)
- /** Converts a given interrupt index into its assocated interrupt line.
+ /** Converts a given interrupt index into its associated interrupt line.
*
* \param[in] IRQIndex Index of the interrupt request to convert.
*
EXOSC_FREQ_16MHZ_MAX = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */
};
- /** Enum for the possible external oscillator statup times. */
+ /** Enum for the possible external oscillator startup times. */
enum XMEGA_Extern_OSC_ClockStartup_t
{
EXOSC_START_6CLK = OSC_XOSCSEL_EXTCLK_gc, /**< Wait 6 clock cycles before startup (external clock). */
* the oscillator is ready for use.
*
* \param[in] FreqRange Frequency range of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockFrequency_t.
- * \param[in] Startup Statup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.
+ * \param[in] Startup Startup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.
*
* \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
*/
*
* \param[in] Source Clock source for the CPU core, a value from \ref XMEGA_System_ClockSource_t.
*
- * \return Boolean \c true if the CPU core clock was sucessfully altered, \c false if invalid parameters specified.
+ * \return Boolean \c true if the CPU core clock was successfully altered, \c false if invalid parameters specified.
*/
static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source) ATTR_ALWAYS_INLINE;
static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source)
#include "AVRISPDescriptors.h"
#if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__)
- /** Indicates if an external reset has ocurred and the compatibility mode needs to be altered */
+ /** Indicates if an external reset has occurred and the compatibility mode needs to be altered */
static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT;
/** Current AVRISP data IN endpoint address. */
*/
void CheckExternalReset(void)
{
- /* If an external reset occured, we need to change compatibility mode */
+ /* If an external reset occurred, we need to change compatibility mode */
AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF));
MCUSR = 0;
} BitBuffer_t;
/* Function Prototypes: */
- /** Initialises or resets a given bit buffer, ready to store new bits.
+ /** Initializes or resets a given bit buffer, ready to store new bits.
*
* \param[in,out] Buffer Bit buffer to initialize
*/
/* Public Interface - May be used in end-application: */
/* Inline Functions: */
- /** Initialises the magnetic stripe card reader ports and pins so that the card reader
+ /** Initializes the magnetic stripe card reader ports and pins so that the card reader
* device can be controlled and read by the card reader driver. This must be called before
* trying to read any of the card reader's status lines.
*/
_delay_us(50);
}
-void HD44780_Initialise(void)
+void HD44780_Initialize(void)
{
PORTD &= ~ALL_BITS;
DDRD |= ALL_BITS;
#define CMD_DISPLAY_ON 0x0C
/* Function Prototypes: */
- void HD44780_Initialise(void);
+ void HD44780_Initialize(void);
void HD44780_WriteData(const uint8_t c);
void HD44780_WriteCommand(const uint8_t c);
USB_Init();
/* Power up the HD44780 Interface */
- HD44780_Initialise();
+ HD44780_Initialize();
HD44780_WriteCommand(CMD_DISPLAY_ON);
/* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
#endif
/* Defines: */
- /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
+ /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
#define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
- /* Close the log file so that the host has exclusive filesystem access */
+ /* Close the log file so that the host has exclusive file system access */
CloseLogFile();
}
this.MaximizeBox = false;
this.MinimizeBox = false;
this.Name = "frmDataloggerSettings";
- this.Text = "DataLogger";
+ this.Text = "Datalogger";
this.Load += new System.EventHandler(this.frmDataloggerSettings_Load);
((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit();
this.ResumeLayout(false);
if (ConnectionHandle == null)
{
- MessageBox.Show("Error: Cannot connect to DataLogger device.");
+ MessageBox.Show("Error: Cannot connect to Datalogger device.");
return;
}
if (ConnectionHandle == null)
{
- MessageBox.Show("Error: Cannot connect to DataLogger device.");
+ MessageBox.Show("Error: Cannot connect to Datalogger device.");
return;
}
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("Dean Camera")]
-[assembly: AssemblyProduct("Temp DataLogger HostApp")]
+[assembly: AssemblyProduct("Temp Datalogger HostApp")]
[assembly: AssemblyCopyright("Copyright © Dean Camera 2011")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
#endif
/* Defines: */
- /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
+ /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
#define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
* statement. While it would be possible to break the uip_process()
* function into many smaller functions, this would increase the code
* size because of the overhead of parameter passing and the fact that
- * the optimiser would not be as efficient.
+ * the optimizer would not be as efficient.
*
* The principle is that we have a small buffer, called the uip_buf,
* in which the device driver puts an incoming packet. The TCP/IP
upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;
#endif /* UIP_CONF_IPV6 */
- /* First sum pseudoheader. */
+ /* First sum pseudo-header. */
/* IP protocol and length fields. This addition cannot carry. */
sum = upper_layer_len + proto;
projects / pub / lufa.git / commitdiff