*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* <td>USBIF CDC Class Standard</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* #define BOOTLOADER_API_TABLE_SIZE 32
* #define BOOTLOADER_API_TABLE_START ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE)
* #define BOOTLOADER_API_CALL(Index) (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2)
- *
+ *
* void (*BootloaderAPI_ErasePage)(uint32_t Address) = BOOTLOADER_API_CALL(0);
* void (*BootloaderAPI_WritePage)(uint32_t Address) = BOOTLOADER_API_CALL(1);
* void (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2);
* uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address) = BOOTLOADER_API_CALL(4);
* uint8_t (*BootloaderAPI_ReadLock)(void) = BOOTLOADER_API_CALL(5);
* void (*BootloaderAPI_WriteLock)(uint8_t LockBits) = BOOTLOADER_API_CALL(6);
- *
+ *
* #define BOOTLOADER_MAGIC_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2))
* #define BOOTLOADER_MAGIC_SIGNATURE 0xDCFB
- *
+ *
* #define BOOTLOADER_CLASS_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4))
* #define BOOTLOADER_CDC_SIGNATURE 0xCDC1
- *
+ *
* #define BOOTLOADER_ADDRESS_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8))
* #define BOOTLOADER_ADDRESS_LENGTH 4
* \endcode
*
+ * \subsection SSec_API_MemLayout Device Memory Map
+ * The following illustration indicates the final memory map of the device when loaded with the bootloader.
+ *
+ * \verbatim
+ * +----------------------------+ 0x0000
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | User Application |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE
+ * | |
+ * | Bootloader Application |
+ * | (Not User App. Accessible) |
+ * | |
+ * +----------------------------+ FLASHEND - 96
+ * | API Table Trampolines |
+ * | (Not User App. Accessible) |
+ * +----------------------------+ FLASHEND - 32
+ * | Bootloader API Table |
+ * | (User App. Accessible) |
+ * +----------------------------+ FLASHEND - 8
+ * | Bootloader ID Constants |
+ * | (User App. Accessible) |
+ * +----------------------------+ FLASHEND
+ * \endverbatim
+ *
* Bootloaders reporting a device release revision number of 1.00 or greater are bootloader API enabled. From the application
* the API support of the bootloader can be detected by reading the FLASH memory bytes located at address \c BOOTLOADER_MAGIC_SIGNATURE_START
* and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader can be determined by reading the
* </tr>
* <tr>
* <td>NO_BLOCK_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
* using the byte-level commands.</td>
* </tr>
* <tr>
* <td>NO_EEPROM_BYTE_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
* to be made using the block-level commands.</td>
* </tr>
* <tr>
* <td>NO_FLASH_BYTE_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
* to be made using the block-level commands.</td>
* </tr>
* <tr>
* <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
-
-#LUFA_OPTS += -D NO_BLOCK_SUPPORT
-#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* <td>USBIF DFU Class Standard, Atmel USB Bootloader Datasheet</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* #define BOOTLOADER_API_TABLE_SIZE 32
* #define BOOTLOADER_API_TABLE_START ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE)
* #define BOOTLOADER_API_CALL(Index) (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2)
- *
+ *
* void (*BootloaderAPI_ErasePage)(uint32_t Address) = BOOTLOADER_API_CALL(0);
* void (*BootloaderAPI_WritePage)(uint32_t Address) = BOOTLOADER_API_CALL(1);
* void (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2);
* uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address) = BOOTLOADER_API_CALL(4);
* uint8_t (*BootloaderAPI_ReadLock)(void) = BOOTLOADER_API_CALL(5);
* void (*BootloaderAPI_WriteLock)(uint8_t LockBits) = BOOTLOADER_API_CALL(6);
- *
+ *
* #define BOOTLOADER_MAGIC_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2))
* #define BOOTLOADER_MAGIC_SIGNATURE 0xDCFB
- *
+ *
* #define BOOTLOADER_CLASS_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4))
* #define BOOTLOADER_CDC_SIGNATURE 0xDFB1
- *
+ *
* #define BOOTLOADER_ADDRESS_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8))
* #define BOOTLOADER_ADDRESS_LENGTH 4
* \endcode
* to the value \c BOOTLOADER_CDC_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes of FLASH
* memory starting from address \c BOOTLOADER_ADDRESS_START.
*
+ * \subsection SSec_API_MemLayout Device Memory Map
+ * The following illustration indicates the final memory map of the device when loaded with the bootloader.
+ *
+ * \verbatim
+ * +----------------------------+ 0x0000
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | User Application |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * | |
+ * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE
+ * | |
+ * | Bootloader Application |
+ * | (Not User App. Accessible) |
+ * | |
+ * +----------------------------+ FLASHEND - 96
+ * | API Table Trampolines |
+ * | (Not User App. Accessible) |
+ * +----------------------------+ FLASHEND - 32
+ * | Bootloader API Table |
+ * | (User App. Accessible) |
+ * +----------------------------+ FLASHEND - 8
+ * | Bootloader ID Constants |
+ * | (User App. Accessible) |
+ * +----------------------------+ FLASHEND
+ * \endverbatim
+ *
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
* </tr>
* <tr>
* <td>SECURE_MODE</td>
- * <td>BootloaderDFU.h</td>
- * <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an
+ * <td>AppConfig.h</td>
+ * <td>If defined to \c true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an
* erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from
- * being dumped by unauthorized persons.</td>
+ * being dumped by unauthorized persons. When false, all memory operations are allowed at any time.</td>
* </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>AUDIO_OUT_STEREO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_MONO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_PORTC</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D AUDIO_OUT_STEREO
-#LUFA_OPTS += -D AUDIO_OUT_MONO
-#LUFA_OPTS += -D AUDIO_OUT_PORTC
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </tr>
* <tr>
* <td>GENERIC_REPORT_SIZE</td>
- * <td>Descriptors.h</td>
- * <td>This token defines the size of the device reports, both sent and received. The value must be an
- * integer ranging from 1 to 255.</td>
+ * <td>AppConfig.h</td>
+ * <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
+ * must be an integer ranging from 1 to 255.</td>
* </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount.</td>
* </tr>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ * </tr>
* </table>
*/
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount.</td>
* </tr>
- * </table>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ * </tr>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
*
* \section Sec_Info USB Information:
*
* <td>Microsoft RNDIS Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>CLIENT_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address of the virtual server.</td>
+ * </tr>
+ * <tr>
+ * <td>ADAPTER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the virtual server on the network.</td>
+ * </tr>
+ * <tr>
* <td>NO_DECODE_ETHERNET</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ARP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_IP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ICMP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_TCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_UDP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_DHCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D NO_DECODE_ETHERNET
-LUFA_OPTS += -D NO_DECODE_ARP
-LUFA_OPTS += -D NO_DECODE_IP
-LUFA_OPTS += -D NO_DECODE_ICMP
-LUFA_OPTS += -D NO_DECODE_TCP
-LUFA_OPTS += -D NO_DECODE_UDP
-LUFA_OPTS += -D NO_DECODE_DHCP
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount.</td>
* </tr>
- * </table>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ * </tr>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>AUDIO_OUT_STEREO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_MONO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_PORTC</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D AUDIO_OUT_STEREO
-#LUFA_OPTS += -D AUDIO_OUT_MONO
-#LUFA_OPTS += -D AUDIO_OUT_PORTC
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </tr>
* <tr>
* <td>GENERIC_REPORT_SIZE</td>
- * <td>Descriptors.h</td>
- * <td>This token defines the size of the device reports, both sent and received. The value must be an
- * integer ranging from 1 to 255.</td>
+ * <td>AppConfig.h</td>
+ * <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
+ * must be an integer ranging from 1 to 255.</td>
* </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
* - this can be set to any positive non-zero amount.</td>
* </tr>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Indicates if the disk should be write protected or not.</td>
+ * </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
*
* \section Sec_Info USB Information:
*
* <td>Microsoft RNDIS Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>CLIENT_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address of the virtual server.</td>
+ * </tr>
+ * <tr>
+ * <td>ADAPTER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the virtual server on the network.</td>
+ * </tr>
+ * <tr>
* <td>NO_DECODE_ETHERNET</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ARP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_IP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ICMP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_TCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_UDP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_DHCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D NO_DECODE_ETHERNET
-LUFA_OPTS += -D NO_DECODE_ARP
-LUFA_OPTS += -D NO_DECODE_IP
-LUFA_OPTS += -D NO_DECODE_ICMP
-LUFA_OPTS += -D NO_DECODE_TCP
-LUFA_OPTS += -D NO_DECODE_UDP
-LUFA_OPTS += -D NO_DECODE_DHCP
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D HOST_DEVICE_SETTLE_DELAY_MS=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=5000
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D HOST_DEVICE_SETTLE_DELAY_MS=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* USBIF Audio 1.0 Data Formats Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=5000
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this project.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - <i>8KB versions with reduced features only</i>
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - <i>8KB versions with reduced features only</i>
*
* \section Sec_Info USB Information:
*
* <td>Atmel AVRISP MKII Protocol Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>AUX_LINE_PORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>AUX_LINE_PIN</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>AUX_LINE_DDR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>AUX_LINE_MASK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>VTARGET_ADC_CHANNEL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
* \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>ENABLE_ISP_PROTOCOL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to enable SPI programming protocol support.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>ENABLE_XPROG_PROTOCOL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to enable PDI and TPI programming protocol support.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>NO_VTARGET_DETECT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
* to report a fixed 3.3V target voltage to the host regardless of the real target voltage.
* \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>VTARGET_REF_VOLTS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply
* voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage
* to the ADC.
* </tr>
* <tr>
* <td>VTARGET_USE_INTERNAL_REF</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will
* override the VTARGET_REF_VOLTS configuration option.
* \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
* </tr>
* <tr>
* <td>VTARGET_SCALE_FACTOR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the
* ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be
* measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set
* </tr>
* <tr>
* <td>LIBUSB_DRIVER_COMPAT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
- * the code compatible with software such as avrdude (all platforms) that use the libUSB driver.</td>
+ * the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
+ *
+ * \note This option is incompatible with \c RESET_TOGGLES_LIBUSB_COMPAT.</td>
+ * </tr>
+ * <tr>
+ * <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
- * <td>Makefile LUFA_OPTS</td>
++ * <td>AppConfig.h</td>
+ * <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
+ * reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
+ * power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
+ *
+ * \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td>
* </tr>
* <tr>
* <td>XCK_RESCUE_CLOCK_ENABLE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming
* hardware that does not expose the OCR1A pin of the AVR, but <i>may</i> cause some issues with PDI programming mode.</td>
* </tr>
* <tr>
* <td>INVERTED_ISP_MISO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used,
* if the translator hardware inverts the received logic level.</td>
* </tr>
* <tr>
* <td>FIRMWARE_VERSION_MINOR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
* with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
* </tr>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define AUX_LINE_PORT PORTB
+ #define AUX_LINE_PIN PINB
+ #define AUX_LINE_DDR DDRB
+ #define AUX_LINE_MASK (1 << 4)
+
+ #define ENABLE_ISP_PROTOCOL
+ #define ENABLE_XPROG_PROTOCOL
+
+ #define VTARGET_ADC_CHANNEL 2
+ #define VTARGET_REF_VOLTS 5
+ #define VTARGET_SCALE_FACTOR 1
+// #define VTARGET_USE_INTERNAL_REF
+// #define NO_VTARGET_DETECT
+// #define XCK_RESCUE_CLOCK_ENABLE
+// #define INVERTED_ISP_MISO
+
+// #define LIBUSB_DRIVER_COMPAT
++// #define RESET_TOGGLES_LIBUSB_COMPAT
+// #define FIRMWARE_VERSION_MINOR 0x11
+
+#endif
--- /dev/null
- #define USE_FLASH_DESCRIPTORS
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+ #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
++// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+ #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 16
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+ #define NO_DEVICE_REMOTE_WAKEUP
+ #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
#include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
+
++ #include "Config/AppConfig.h"
++
+ /* Preprocessor Checks: */
+ #if defined(LIBUSB_DRIVER_COMPAT) && defined(RESET_TOGGLES_LIBUSB_COMPAT)
+ #error LIBUSB_DRIVER_COMPAT and RESET_TOGGLES_LIBUSB_COMPAT are mutually exclusive.
+ #endif
/* Macros: */
- #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__)
- /** Endpoint address of the AVRISP data OUT endpoint. */
- #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2)
+ /** Endpoint address of the AVRISP data OUT endpoint. */
+ #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2)
+
+ /** Endpoint address of the AVRISP data IN endpoint, when in Jungo driver compatibility mode. */
+ #define AVRISP_DATA_IN_EPADDR_JUNGO (ENDPOINT_DIR_IN | 2)
+
+ /** Endpoint address of the AVRISP data IN endpoint, when in LibUSB driver compatibility mode. */
+ #define AVRISP_DATA_IN_EPADDR_LIBUSB (ENDPOINT_DIR_IN | 3)
+ #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__)
/** Endpoint address of the AVRISP data IN endpoint. */
- #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 2)
+ #define AVRISP_DATA_IN_EPADDR AVRISP_DATA_IN_EPADDR_JUNGO
+ #elif defined(RESET_TOGGLES_LIBUSB_COMPAT)
+ #define AVRISP_DATA_IN_EPADDR AVRISP_CurrDataINEndpointAddress
#else
- #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2)
- #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 3)
+ #define AVRISP_DATA_IN_EPADDR AVRISP_DATA_IN_EPADDR_LIBUSB
#endif
-
+
/** Size in bytes of the AVRISP data endpoint. */
#define AVRISP_DATA_EPSIZE 64
USB_Descriptor_Endpoint_t AVRISP_DataOutEndpoint;
} USB_Descriptor_Configuration_t;
+ /* External Variables: */
+ #if defined(RESET_TOGGLES_LIBUSB_COMPAT)
+ extern uint8_t AVRISP_CurrDataINEndpointAddress;
+ #endif
+
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
- const void** const DescriptorAddress)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+ const void** const DescriptorAddress,
+ uint8_t* const DescriptorMemorySpace)
+ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4);
+
+ #if defined(RESET_TOGGLES_LIBUSB_COMPAT)
+ void CheckExternalReset(void) ATTR_NAKED ATTR_INIT_SECTION(3);
+ void UpdateCurrentCompatibilityMode(void);
+ #endif
#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-
-LUFA_OPTS += -D AUX_LINE_PORT=PORTB
-LUFA_OPTS += -D AUX_LINE_PIN=PINB
-LUFA_OPTS += -D AUX_LINE_DDR=DDRB
-LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D ENABLE_ISP_PROTOCOL
-LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL
-LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
-LUFA_OPTS += -D VTARGET_REF_VOLTS=5
-LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1
-#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF
-#LUFA_OPTS += -D NO_VTARGET_DETECT
-#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
-#LUFA_OPTS += -D RESET_TOGGLES_LIBUSB_COMPAT
-#LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE
-#LUFA_OPTS += -D INVERTED_ISP_MISO
-#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this project.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
*
* \section Sec_Info USB Information:
*
* Arduino Bootloader Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>AVR_RESET_LINE_PORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td>
* </tr>
* <tr>
* <td>AVR_RESET_LINE_DDR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td>
* </tr>
* <tr>
* <td>AVR_RESET_LINE_MASK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td>
* </tr>
* <tr>
* <td>AVR_RESET_PULSE_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Pulse length in milliseconds for the target /RESET pulse.</td>
* </tr>
* <tr>
* <td>TX_RX_LED_PULSE_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
* </tr>
* <tr>
* <td>PING_PONG_LED_PULSE_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td>
* </tr>
* <tr>
* <td>RECEIVE_BUFFER_FLUSH_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Period between flushings of received data buffer to the attached USB host.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-LUFA_OPTS += -D AVR_RESET_LINE_PORT="PORTD"
-LUFA_OPTS += -D AVR_RESET_LINE_DDR="DDRD"
-LUFA_OPTS += -D AVR_RESET_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D AVR_RESET_PULSE_MS=10
-LUFA_OPTS += -D TX_RX_LED_PULSE_MS=30
-LUFA_OPTS += -D PING_PONG_LED_PULSE_MS=100
-LUFA_OPTS += -D RECEIVE_BUFFER_FLUSH_MS=10
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this project.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
*
* \section Sec_Info USB Information:
*
* General MIDI Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>MAX_SIMULTANEOUS_NOTES</td>
- * <td>MIDIToneGenerator.h</td>
+ * <td>AppConfig.h</td>
* <td>Sets the maximum number of MIDI notes that can be generated simultaneously. More notes require more processing time,
* and thus a value that is too high will cause audiable sound distortion due to insufficient CPU time.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this project.
*
- * - AT90USB1287
- * - AT90USB1286
+ * \li AT90USB1287
+ * \li AT90USB1286
*
* \section Sec_Info USB Information:
*
* <td>USBIF HID Standard, USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>MAG_T1_CLOCK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's CLOCK line for the reader's track 1 output.</td>
* </tr>
* <tr>
* <td>MAG_T1_DATA</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's DATA line for the reader's track 1 output.</td>
* </tr>
* <tr>
* <td>MAG_T2_CLOCK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's CLOCK line for the reader's track 2 output.</td>
* </tr>
* <tr>
* <td>MAG_T2_DATA</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's DATA line for the reader's track 2 output.</td>
* </tr>
* <tr>
* <td>MAG_T3_CLOCK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's CLOCK line for the reader's track 3 output.</td>
* </tr>
* <tr>
* <td>MAG_T3_DATA</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's DATA line for the reader's track 3 output.</td>
* </tr>
* <tr>
* <td>MAG_CARDPRESENT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's card detection output.</td>
* </tr>
* <tr>
* <td>MAG_PIN</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PIN register that the magnetic card reader device is attached to.</td>
* </tr>
* <tr>
* <td>MAG_PORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PORT register that the magnetic card reader device is attached to.</td>
* </tr>
* <tr>
* <td>MAG_DDR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>DDR register that the magnetic card reader device is attached to.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MAG_T1_CLOCK="(1 << 0)"
-LUFA_OPTS += -D MAG_T1_DATA="(1 << 1)"
-LUFA_OPTS += -D MAG_T2_CLOCK="(1 << 2)"
-LUFA_OPTS += -D MAG_T2_DATA="(1 << 3)"
-LUFA_OPTS += -D MAG_T3_CLOCK="(1 << 4)"
-LUFA_OPTS += -D MAG_T3_DATA="(1 << 5)"
-LUFA_OPTS += -D MAG_CARDPRESENT="(1 << 6)"
-LUFA_OPTS += -D MAG_PIN=PINB
-LUFA_OPTS += -D MAG_DDR=DDRB
-LUFA_OPTS += -D MAG_PORT=PORTB
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D HOST_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
\r
\r
# LUFA library compile-time options and predefined tokens\r
-LUFA_OPTS = -D USB_DEVICE_ONLY\r
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0\r
-LUFA_OPTS += -D ORDERED_EP_CONFIG\r
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS\r
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT\r
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER\r
\r
\r
# Create the LUFA source path variables by including the LUFA root makefile\r
# Each directory must be seperated by a space.\r
# Use forward slashes for directory separators.\r
# For a directory that has spaces, enclose it in quotes.\r
-EXTRAINCDIRS = $(LUFA_PATH)/\r
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/\r
\r
\r
# Compiler flag to set the C Standard level.\r
\r
doxygen:\r
@echo Generating Project Documentation \($(TARGET)\)...\r
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \\r
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \\r
exit 1; \\r
fi;\r
@echo Documentation Generation Complete.\r
*
* The following list indicates what microcontrollers are compatible with this demo.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
- * - Series 6 USB AVRs (AT90USBxxx6)
- * - Series 4 USB AVRs (ATMEGAxxU4) - <i>those with >16KB of FLASH memory only</i>
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4) - <i>those with >16KB of FLASH memory only</i>
*
* \section Sec_Info USB Information:
*
* USBIF HID Specification, USBIF HID Usage Tables</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>DUMMY_RTC</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time
* stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-#LUFA_OPTS += -D DUMMY_RTC
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this project.
*
- * - Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
* </tr>
* <tr>
* <td>ENABLE_TELNET_SERVER</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections
* and processes user commands.</td>
* </tr>
* <tr>
* <td>ENABLE_DHCP_CLIENT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td>
* </tr>
* <tr>
* <td>ENABLE_DHCP_SERVER</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client.</td>
* </tr>
* <tr>
* <td>DEVICE_IP_ADDRESS</td>
- * <td>Lib/uIPManagement.h</td>
+ * <td>AppConfig.h</td>
* <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
* </tr>
* <tr>
* <td>DEVICE_NETMASK</td>
- * <td>Lib/uIPManagement.h</td>
+ * <td>AppConfig.h</td>
* <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
* </tr>
* <tr>
* <td>DEVICE_GATEWAY</td>
- * <td>Lib/uIPManagement.h</td>
+ * <td>AppConfig.h</td>
* <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT
* is not defined).</td>
* </tr>
* <tr>
* <td>MAX_URI_LENGTH</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td>
* </tr>
+ * <tr>
+ * <td>SERVER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>MAC address of the server used when sending Ethernet packets onto the bus.</td>
+ * </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-LUFA_OPTS += -D ENABLE_DHCP_CLIENT
-LUFA_OPTS += -D ENABLE_DHCP_SERVER
-LUFA_OPTS += -D ENABLE_TELNET_SERVER
-LUFA_OPTS += -D MAX_URI_LENGTH=50
-
-LUFA_OPTS += -D UIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)"
-LUFA_OPTS += -D UIP_CONF_BROADCAST=1
-LUFA_OPTS += -D UIP_CONF_TCP=1
-LUFA_OPTS += -D UIP_CONF_UDP_CONNS=1
-LUFA_OPTS += -D UIP_CONF_MAX_CONNECTIONS=3
-LUFA_OPTS += -D UIP_CONF_MAX_LISTENPORTS=5
-LUFA_OPTS += -D UIP_CONF_BUFFER_SIZE=1514
-LUFA_OPTS += -D UIP_CONF_LL_802154=0
-LUFA_OPTS += -D UIP_CONF_LL_80211=0
-LUFA_OPTS += -D UIP_CONF_ROUTER=0
-LUFA_OPTS += -D UIP_CONF_ICMP6=0
-LUFA_OPTS += -D UIP_CONF_ICMP_DEST_UNREACH=1
-LUFA_OPTS += -D UIP_URGDATA=0
-LUFA_OPTS += -D UIP_ARCH_CHKSUM=0
-LUFA_OPTS += -D UIP_ARCH_ADD32=0
-LUFA_OPTS += -D UIP_NEIGHBOR_CONF_ADDRTYPE=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
*
* The following list indicates what microcontrollers are compatible with this project.
*
- * - AT90USB1287
+ * \li AT90USB1287
*
* \section Sec_Info USB Information:
*
* <td>2) Atmel AVRISP MKII Protocol Specification</td>
* </tr>
* <tr>
- * <td><b>Usable Speeds:</b></td>
+ * <td><b>Supported USB Speeds:</b></td>
* <td>1) Full Speed Mode</td>
* <td>2) Full Speed Mode</td>
* </tr>
* </tr>
* <tr>
* <td>LIBUSB_DRIVER_COMPAT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
* the code compatible with software such as avrdude (all platforms) that use the libUSB driver.</td>
* </tr>
* <tr>
* <td>FIRMWARE_VERSION_MINOR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
* with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-
-LUFA_OPTS += -D AUX_LINE_PORT=PORTB
-LUFA_OPTS += -D AUX_LINE_PIN=PINB
-LUFA_OPTS += -D AUX_LINE_DDR=DDRB
-LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
-LUFA_OPTS += -D VTARGET_REF_VOLTS=3.3
-LUFA_OPTS += -D VTARGET_SCALE_FACTOR=2
-#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
-#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
include $(LUFA_PATH)/LUFA/makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ Config/
# Compiler flag to set the C Standard level.
doxygen:
@echo Generating Project Documentation \($(TARGET)\)...
- @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
exit 1; \
fi;
@echo Documentation Generation Complete.
projects / pub / lufa.git / commitdiff