Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2010.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6       www.fourwalledcubicle.com
   7 */
   8
   9 /*
  10   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Header file for XPROGTarget.c.
  34  */
  35
  36 #ifndef _XPROG_TARGET_
  37 #define _XPROG_TARGET_
  38
  39         /* Includes: */
  40                 #include <avr/io.h>
  41                 #include <avr/interrupt.h>
  42                 #include <stdbool.h>
  43
  44                 #include <LUFA/Common/Common.h>
  45
  46                 #include "../V2Protocol.h"
  47                 #include "XPROGProtocol.h"
  48
  49         /* Preprocessor Checks: */
  50                 #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
  51                         #undef ENABLE_ISP_PROTOCOL
  52
  53                         #if !defined(ENABLE_XPROG_PROTOCOL)
  54                                 #define ENABLE_XPROG_PROTOCOL
  55                         #endif
  56                 #endif
  57
  58                 /** Serial carrier TPI/PDI speed when hardware TPI/PDI mode is used. */
  59                 #define XPROG_HARDWARE_SPEED       1000000
  60
  61                 /** Total number of bits in a single USART frame. */
  62                 #define BITS_IN_USART_FRAME        12
  63
  64                 #define PDI_CMD_LDS                0x00
  65                 #define PDI_CMD_LD                 0x20
  66                 #define PDI_CMD_STS                0x40
  67                 #define PDI_CMD_ST                 0x60
  68                 #define PDI_CMD_LDCS               0x80
  69                 #define PDI_CMD_REPEAT             0xA0
  70                 #define PDI_CMD_STCS               0xC0
  71                 #define PDI_CMD_KEY                0xE0
  72
  73                 #define PDI_STATUS_REG             0
  74                 #define PDI_RESET_REG              1
  75                 #define PDI_CTRL_REG               2
  76
  77                 #define PDI_STATUS_NVM             (1 << 1)
  78
  79                 #define PDI_RESET_KEY              0x59
  80                 #define PDI_NVMENABLE_KEY          (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
  81
  82                 #define PDI_DATSIZE_1BYTE          0
  83                 #define PDI_DATSIZE_2BYTES         1
  84                 #define PDI_DATSIZE_3BYTES         2
  85                 #define PDI_DATSIZE_4BYTES         3
  86
  87                 #define PDI_POINTER_INDIRECT       0
  88                 #define PDI_POINTER_INDIRECT_PI    1
  89                 #define PDI_POINTER_DIRECT         2
  90
  91                 #define TPI_CMD_SLD                0x20
  92                 #define TPI_CMD_SST                0x60
  93                 #define TPI_CMD_SSTPR              0x68
  94                 #define TPI_CMD_SIN                0x10
  95                 #define TPI_CMD_SOUT               0x90
  96                 #define TPI_CMD_SLDCS              0x80
  97                 #define TPI_CMD_SSTCS              0xC0
  98                 #define TPI_CMD_SKEY               0xE0
  99
 100                 #define TPI_STATUS_REG             0x00
 101                 #define TPI_CTRL_REG               0x02
 102                 #define TPI_ID_REG                 0x0F
 103
 104                 #define TPI_STATUS_NVM             (1 << 1)
 105
 106                 #define TPI_NVMENABLE_KEY          (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
 107
 108                 #define TPI_POINTER_INDIRECT       0
 109                 #define TPI_POINTER_INDIRECT_PI    4
 110
 111         /* Function Prototypes: */
 112                 void    XPROGTarget_EnableTargetPDI(void);
 113                 void    XPROGTarget_EnableTargetTPI(void);
 114                 void    XPROGTarget_DisableTargetPDI(void);
 115                 void    XPROGTarget_DisableTargetTPI(void);
 116                 void    XPROGTarget_SendByte(const uint8_t Byte);
 117                 uint8_t XPROGTarget_ReceiveByte(void);
 118                 void    XPROGTarget_SendBreak(void);
 119                 bool    XPROGTarget_WaitWhileNVMBusBusy(void);
 120
 121                 #if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL))
 122                         static void XPROGTarget_SetTxMode(void);
 123                         static void XPROGTarget_SetRxMode(void);
 124                 #endif
 125
 126 #endif