Demos/Host/Incomplete/BluetoothHost/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb647
  64
  65
  66 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #     Typical values are:
  78 #         F_CPU =  1000000
  79 #         F_CPU =  1843200
  80 #         F_CPU =  2000000
  81 #         F_CPU =  3686400
  82 #         F_CPU =  4000000
  83 #         F_CPU =  7372800
  84 #         F_CPU =  8000000
  85 #         F_CPU = 11059200
  86 #         F_CPU = 14745600
  87 #         F_CPU = 16000000
  88 #         F_CPU = 18432000
  89 #         F_CPU = 20000000
  90 F_CPU = 8000000
  91
  92
  93 # Input clock frequency.
  94 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  95 #     input clock frequency (before any prescaling is performed). This value may
  96 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  97 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  98 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  99 #     at the end, this will be done automatically to create a 32-bit value in your
 100 #     source code.
 101 #
 102 #     If no clock division is performed on the input clock inside the AVR (via the
 103 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 104 F_CLOCK = $(F_CPU)
 105
 106
 107 # Output format. (can be srec, ihex, binary)
 108 FORMAT = ihex
 109
 110
 111 # Target file name (without extension).
 112 TARGET = BluetoothHost
 113
 114
 115 # Object files directory
 116 #     To put object files in current directory, use a dot (.), do NOT make
 117 #     this an empty or blank macro!
 118 OBJDIR = .
 119
 120
 121 # Path to the LUFA library
 122 LUFA_PATH = ../../../..
 123
 124
 125 # LUFA library compile-time options
 126 LUFA_OPTS  = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
 127 LUFA_OPTS += -D USB_HOST_ONLY
 128 LUFA_OPTS += -D NO_STREAM_CALLBACKS
 129 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 130
 131
 132 # List C source files here. (C dependencies are automatically generated.)
 133 SRC = $(TARGET).c                                                 \
 134           DeviceDescriptor.c                                          \
 135           ConfigDescriptor.c                                          \
 136           Lib/BluetoothStack.c                                        \
 137           Lib/BluetoothHCICommands.c                                  \
 138           Lib/BluetoothACLPackets.c                                   \
 139           $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c         \
 140           $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 141           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 142           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 143           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 144           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 145           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 146           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 147           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 151
 152
 153 # List C++ source files here. (C dependencies are automatically generated.)
 154 CPPSRC =
 155
 156
 157 # List Assembler source files here.
 158 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 159 #     will not be considered source files but generated files (assembler
 160 #     output from the compiler), and will be deleted upon "make clean"!
 161 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 162 #     it will preserve the spelling of the filenames, and gcc itself does
 163 #     care about how the name is spelled on its command-line.
 164 ASRC =
 165
 166
 167 # Optimization level, can be [0, 1, 2, 3, s].
 168 #     0 = turn off optimization. s = optimize for size.
 169 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 170 OPT = s
 171
 172
 173 # Debugging format.
 174 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 175 #     AVR Studio 4.10 requires dwarf-2.
 176 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 177 DEBUG = dwarf-2
 178
 179
 180 # List any extra directories to look for include files here.
 181 #     Each directory must be seperated by a space.
 182 #     Use forward slashes for directory separators.
 183 #     For a directory that has spaces, enclose it in quotes.
 184 EXTRAINCDIRS = $(LUFA_PATH)/
 185
 186
 187 # Compiler flag to set the C Standard level.
 188 #     c89   = "ANSI" C
 189 #     gnu89 = c89 plus GCC extensions
 190 #     c99   = ISO C99 standard (not yet fully implemented)
 191 #     gnu99 = c99 plus GCC extensions
 192 CSTANDARD = -std=gnu99
 193
 194
 195 # Place -D or -U options here for C sources
 196 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 197
 198
 199 # Place -D or -U options here for ASM sources
 200 ADEFS = -DF_CPU=$(F_CPU)
 201
 202
 203 # Place -D or -U options here for C++ sources
 204 CPPDEFS = -DF_CPU=$(F_CPU)UL
 205 #CPPDEFS += -D__STDC_LIMIT_MACROS
 206 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 207
 208
 209
 210 #---------------- Compiler Options C ----------------
 211 #  -g*:          generate debugging information
 212 #  -O*:          optimization level
 213 #  -f...:        tuning, see GCC manual and avr-libc documentation
 214 #  -Wall...:     warning level
 215 #  -Wa,...:      tell GCC to pass this to the assembler.
 216 #    -adhlns...: create assembler listing
 217 CFLAGS = -g$(DEBUG)
 218 CFLAGS += $(CDEFS)
 219 CFLAGS += -O$(OPT)
 220 CFLAGS += -funsigned-char
 221 CFLAGS += -funsigned-bitfields
 222 CFLAGS += -ffunction-sections
 223 CFLAGS += -fpack-struct
 224 CFLAGS += -fshort-enums
 225 CFLAGS += -finline-limit=20
 226 CFLAGS += -Wall
 227 CFLAGS += -Wstrict-prototypes
 228 CFLAGS += -Wundef
 229 #CFLAGS += -fno-unit-at-a-time
 230 #CFLAGS += -Wunreachable-code
 231 #CFLAGS += -Wsign-compare
 232 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 233 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 234 CFLAGS += $(CSTANDARD)
 235
 236
 237 #---------------- Compiler Options C++ ----------------
 238 #  -g*:          generate debugging information
 239 #  -O*:          optimization level
 240 #  -f...:        tuning, see GCC manual and avr-libc documentation
 241 #  -Wall...:     warning level
 242 #  -Wa,...:      tell GCC to pass this to the assembler.
 243 #    -adhlns...: create assembler listing
 244 CPPFLAGS = -g$(DEBUG)
 245 CPPFLAGS += $(CPPDEFS)
 246 CPPFLAGS += -O$(OPT)
 247 CPPFLAGS += -funsigned-char
 248 CPPFLAGS += -funsigned-bitfields
 249 CPPFLAGS += -fpack-struct
 250 CPPFLAGS += -fshort-enums
 251 CPPFLAGS += -fno-exceptions
 252 CPPFLAGS += -Wall
 253 CFLAGS += -Wundef
 254 #CPPFLAGS += -mshort-calls
 255 #CPPFLAGS += -fno-unit-at-a-time
 256 #CPPFLAGS += -Wstrict-prototypes
 257 #CPPFLAGS += -Wunreachable-code
 258 #CPPFLAGS += -Wsign-compare
 259 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 260 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 261 #CPPFLAGS += $(CSTANDARD)
 262
 263
 264 #---------------- Assembler Options ----------------
 265 #  -Wa,...:   tell GCC to pass this to the assembler.
 266 #  -adhlns:   create listing
 267 #  -gstabs:   have the assembler create line number information; note that
 268 #             for use in COFF files, additional information about filenames
 269 #             and function names needs to be present in the assembler source
 270 #             files -- see avr-libc docs [FIXME: not yet described there]
 271 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 272 #       dump that will be displayed for a given single line of source input.
 273 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 274
 275
 276 #---------------- Library Options ----------------
 277 # Minimalistic printf version
 278 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 279
 280 # Floating point printf version (requires MATH_LIB = -lm below)
 281 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 282
 283 # If this is left blank, then it will use the Standard printf version.
 284 PRINTF_LIB =
 285 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 286 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 287
 288
 289 # Minimalistic scanf version
 290 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 291
 292 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 293 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 294
 295 # If this is left blank, then it will use the Standard scanf version.
 296 SCANF_LIB =
 297 #SCANF_LIB = $(SCANF_LIB_MIN)
 298 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 299
 300
 301 MATH_LIB = -lm
 302
 303
 304 # List any extra directories to look for libraries here.
 305 #     Each directory must be seperated by a space.
 306 #     Use forward slashes for directory separators.
 307 #     For a directory that has spaces, enclose it in quotes.
 308 EXTRALIBDIRS =
 309
 310
 311
 312 #---------------- External Memory Options ----------------
 313
 314 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 315 # used for variables (.data/.bss) and heap (malloc()).
 316 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 317
 318 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 319 # only used for heap (malloc()).
 320 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 321
 322 EXTMEMOPTS =
 323
 324
 325
 326 #---------------- Linker Options ----------------
 327 #  -Wl,...:     tell GCC to pass this to linker.
 328 #    -Map:      create map file
 329 #    --cref:    add cross reference to  map file
 330 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 331 LDFLAGS += -Wl,--relax
 332 LDFLAGS += -Wl,--gc-sections
 333 LDFLAGS += $(EXTMEMOPTS)
 334 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 335 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 336 #LDFLAGS += -T linker_script.x
 337
 338
 339
 340 #---------------- Programming Options (avrdude) ----------------
 341
 342 # Programming hardware: alf avr910 avrisp bascom bsd
 343 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 344 #
 345 # Type: avrdude -c ?
 346 # to get a full listing.
 347 #
 348 AVRDUDE_PROGRAMMER = jtagmkII
 349
 350 # com1 = serial port. Use lpt1 to connect to parallel port.
 351 AVRDUDE_PORT = usb
 352
 353 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 354 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 355
 356
 357 # Uncomment the following if you want avrdude's erase cycle counter.
 358 # Note that this counter needs to be initialized first using -Yn,
 359 # see avrdude manual.
 360 #AVRDUDE_ERASE_COUNTER = -y
 361
 362 # Uncomment the following if you do /not/ wish a verification to be
 363 # performed after programming the device.
 364 #AVRDUDE_NO_VERIFY = -V
 365
 366 # Increase verbosity level.  Please use this when submitting bug
 367 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 368 # to submit bug reports.
 369 #AVRDUDE_VERBOSE = -v -v
 370
 371 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 372 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 373 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 374 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 375
 376
 377
 378 #---------------- Debugging Options ----------------
 379
 380 # For simulavr only - target MCU frequency.
 381 DEBUG_MFREQ = $(F_CPU)
 382
 383 # Set the DEBUG_UI to either gdb or insight.
 384 # DEBUG_UI = gdb
 385 DEBUG_UI = insight
 386
 387 # Set the debugging back-end to either avarice, simulavr.
 388 DEBUG_BACKEND = avarice
 389 #DEBUG_BACKEND = simulavr
 390
 391 # GDB Init Filename.
 392 GDBINIT_FILE = __avr_gdbinit
 393
 394 # When using avarice settings for the JTAG
 395 JTAG_DEV = /dev/com1
 396
 397 # Debugging port used to communicate between GDB / avarice / simulavr.
 398 DEBUG_PORT = 4242
 399
 400 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 401 #     just set to localhost unless doing some sort of crazy debugging when
 402 #     avarice is running on a different computer.
 403 DEBUG_HOST = localhost
 404
 405
 406
 407 #============================================================================
 408
 409
 410 # Define programs and commands.
 411 SHELL = sh
 412 CC = avr-gcc
 413 OBJCOPY = avr-objcopy
 414 OBJDUMP = avr-objdump
 415 SIZE = avr-size
 416 AR = avr-ar rcs
 417 NM = avr-nm
 418 AVRDUDE = avrdude
 419 REMOVE = rm -f
 420 REMOVEDIR = rm -rf
 421 COPY = cp
 422 WINSHELL = cmd
 423
 424 # Define Messages
 425 # English
 426 MSG_ERRORS_NONE = Errors: none
 427 MSG_BEGIN = -------- begin --------
 428 MSG_END = --------  end  --------
 429 MSG_SIZE_BEFORE = Size before:
 430 MSG_SIZE_AFTER = Size after:
 431 MSG_COFF = Converting to AVR COFF:
 432 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 433 MSG_FLASH = Creating load file for Flash:
 434 MSG_EEPROM = Creating load file for EEPROM:
 435 MSG_EXTENDED_LISTING = Creating Extended Listing:
 436 MSG_SYMBOL_TABLE = Creating Symbol Table:
 437 MSG_LINKING = Linking:
 438 MSG_COMPILING = Compiling C:
 439 MSG_COMPILING_CPP = Compiling C++:
 440 MSG_ASSEMBLING = Assembling:
 441 MSG_CLEANING = Cleaning project:
 442 MSG_CREATING_LIBRARY = Creating library:
 443
 444
 445
 446
 447 # Define all object files.
 448 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 449
 450 # Define all listing files.
 451 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 452
 453
 454 # Compiler flags to generate dependency files.
 455 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 456
 457
 458 # Combine all necessary flags and optional flags.
 459 # Add target processor to flags.
 460 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 461 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 462 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 463
 464
 465
 466
 467
 468 # Default target.
 469 all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
 470
 471 # Change the build target to build a HEX file or a library.
 472 build: elf hex eep lss sym
 473 #build: lib
 474
 475
 476 elf: $(TARGET).elf
 477 hex: $(TARGET).hex
 478 eep: $(TARGET).eep
 479 lss: $(TARGET).lss
 480 sym: $(TARGET).sym
 481 LIBNAME=lib$(TARGET).a
 482 lib: $(LIBNAME)
 483
 484
 485
 486 # Eye candy.
 487 # AVR Studio 3.x does not check make's exit code but relies on
 488 # the following magic strings to be generated by the compile job.
 489 begin:
 490         @echo
 491         @echo $(MSG_BEGIN)
 492
 493 end:
 494         @echo $(MSG_END)
 495         @echo
 496
 497
 498 # Display size of file.
 499 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 500 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 501 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 502 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 503
 504 sizebefore:
 505         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 506         2>/dev/null; echo; fi
 507
 508 sizeafter:
 509         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 510         2>/dev/null; echo; fi
 511
 512 showeventhooks: build
 513         @echo
 514         @echo -------- Unhooked LUFA Events --------
 515         @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
 516                    cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 517                            echo "(None)"
 518         @echo --------------------------------------
 519
 520 showliboptions:
 521         @echo
 522         @echo ---- Compile Time Library Options ----
 523         @for i in $(LUFA_OPTS:-D%=%); do \
 524                 echo $$i; \
 525         done
 526         @echo --------------------------------------
 527
 528 showtarget:
 529         @echo
 530         @echo --------- Target Information ---------
 531         @echo AVR Model: $(MCU)
 532         @echo Board:     $(BOARD)
 533         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 534         @echo --------------------------------------
 535
 536 # Display compiler version information.
 537 gccversion :
 538         @$(CC) --version
 539
 540
 541
 542 # Program the device.
 543 program: $(TARGET).hex $(TARGET).eep
 544         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 545
 546
 547 # Generate avr-gdb config/init file which does the following:
 548 #     define the reset signal, load the target file, connect to target, and set
 549 #     a breakpoint at main().
 550 gdb-config:
 551         @$(REMOVE) $(GDBINIT_FILE)
 552         @echo define reset >> $(GDBINIT_FILE)
 553         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 554         @echo end >> $(GDBINIT_FILE)
 555         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 556         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 557 ifeq ($(DEBUG_BACKEND),simulavr)
 558         @echo load  >> $(GDBINIT_FILE)
 559 endif
 560         @echo break main >> $(GDBINIT_FILE)
 561
 562 debug: gdb-config $(TARGET).elf
 563 ifeq ($(DEBUG_BACKEND), avarice)
 564         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 565         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 566         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 567         @$(WINSHELL) /c pause
 568
 569 else
 570         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 571         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 572 endif
 573         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 574
 575
 576
 577
 578 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 579 COFFCONVERT = $(OBJCOPY) --debugging
 580 COFFCONVERT += --change-section-address .data-0x800000
 581 COFFCONVERT += --change-section-address .bss-0x800000
 582 COFFCONVERT += --change-section-address .noinit-0x800000
 583 COFFCONVERT += --change-section-address .eeprom-0x810000
 584
 585
 586
 587 coff: $(TARGET).elf
 588         @echo
 589         @echo $(MSG_COFF) $(TARGET).cof
 590         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 591
 592
 593 extcoff: $(TARGET).elf
 594         @echo
 595         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 596         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 597
 598
 599
 600 # Create final output files (.hex, .eep) from ELF output file.
 601 %.hex: %.elf
 602         @echo
 603         @echo $(MSG_FLASH) $@
 604         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 605
 606 %.eep: %.elf
 607         @echo
 608         @echo $(MSG_EEPROM) $@
 609         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 610         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 611
 612 # Create extended listing file from ELF output file.
 613 %.lss: %.elf
 614         @echo
 615         @echo $(MSG_EXTENDED_LISTING) $@
 616         $(OBJDUMP) -h -z -S $< > $@
 617
 618 # Create a symbol table from ELF output file.
 619 %.sym: %.elf
 620         @echo
 621         @echo $(MSG_SYMBOL_TABLE) $@
 622         $(NM) -n $< > $@
 623
 624
 625
 626 # Create library from object files.
 627 .SECONDARY : $(TARGET).a
 628 .PRECIOUS : $(OBJ)
 629 %.a: $(OBJ)
 630         @echo
 631         @echo $(MSG_CREATING_LIBRARY) $@
 632         $(AR) $@ $(OBJ)
 633
 634
 635 # Link: create ELF output file from object files.
 636 .SECONDARY : $(TARGET).elf
 637 .PRECIOUS : $(OBJ)
 638 %.elf: $(OBJ)
 639         @echo
 640         @echo $(MSG_LINKING) $@
 641         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 642
 643
 644 # Compile: create object files from C source files.
 645 $(OBJDIR)/%.o : %.c
 646         @echo
 647         @echo $(MSG_COMPILING) $<
 648         $(CC) -c $(ALL_CFLAGS) $< -o $@
 649
 650
 651 # Compile: create object files from C++ source files.
 652 $(OBJDIR)/%.o : %.cpp
 653         @echo
 654         @echo $(MSG_COMPILING_CPP) $<
 655         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 656
 657
 658 # Compile: create assembler files from C source files.
 659 %.s : %.c
 660         $(CC) -S $(ALL_CFLAGS) $< -o $@
 661
 662
 663 # Compile: create assembler files from C++ source files.
 664 %.s : %.cpp
 665         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 666
 667
 668 # Assemble: create object files from assembler source files.
 669 $(OBJDIR)/%.o : %.S
 670         @echo
 671         @echo $(MSG_ASSEMBLING) $<
 672         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 673
 674
 675 # Create preprocessed source for use in sending a bug report.
 676 %.i : %.c
 677         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 678
 679
 680 # Target: clean project.
 681 clean: begin clean_list clean_binary end
 682
 683 clean_binary:
 684         $(REMOVE) $(TARGET).hex
 685
 686 clean_list:
 687         @echo $(MSG_CLEANING)
 688         $(REMOVE) $(TARGET).eep
 689         $(REMOVE) $(TARGET)eep.hex
 690         $(REMOVE) $(TARGET).cof
 691         $(REMOVE) $(TARGET).elf
 692         $(REMOVE) $(TARGET).map
 693         $(REMOVE) $(TARGET).sym
 694         $(REMOVE) $(TARGET).lss
 695         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 696         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 697         $(REMOVE) $(SRC:.c=.s)
 698         $(REMOVE) $(SRC:.c=.d)
 699         $(REMOVE) $(SRC:.c=.i)
 700         $(REMOVEDIR) .dep
 701
 702
 703 doxygen:
 704         @echo Generating Project Documentation...
 705         @doxygen Doxygen.conf
 706         @echo Documentation Generation Complete.
 707
 708 clean_doxygen:
 709         rm -rf Documentation
 710
 711 # Create object files directory
 712 $(shell mkdir $(OBJDIR) 2>/dev/null)
 713
 714
 715 # Include the dependency files.
 716 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 717
 718
 719 # Listing of phony targets.
 720 .PHONY : all showeventhooks showliboptions showtarget  \
 721 begin finish end sizebefore sizeafter gccversion build \
 722 elf hex eep lss sym coff extcoff program clean debug   \
 723 clean_list clean_binary gdb-config doxygen dfu flip    \
 724 flip-ee dfu-ee