LUFA/Drivers/USB/Class/Host/MassStorage.h

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2011.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *  \brief Host mode driver for the library USB Mass Storage Class driver.
  33  *
  34  *  Host mode driver for the library USB Mass Storage Class driver.
  35  *
  36  *  \note This file should not be included directly. It is automatically included as needed by the USB module driver
  37  *        dispatch header located in LUFA/Drivers/USB.h.
  38  */
  39
  40 /** \ingroup Group_USBClassMS
  41  *  \defgroup Group_USBClassMassStorageHost Mass Storage Class Host Mode Driver
  42  *
  43  *  \section Sec_Dependencies Module Source Dependencies
  44  *  The following files must be built with any user project that uses this module:
  45  *    - LUFA/Drivers/USB/Class/Host/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  46  *
  47  *  \section Sec_ModDescription Module Description
  48  *  Host Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
  49  *
  50  *  @{
  51  */
  52
  53 #ifndef __MS_CLASS_HOST_H__
  54 #define __MS_CLASS_HOST_H__
  55
  56         /* Includes: */
  57                 #include "../../USB.h"
  58                 #include "../Common/MassStorage.h"
  59
  60         /* Enable C linkage for C++ Compilers: */
  61                 #if defined(__cplusplus)
  62                         extern "C" {
  63                 #endif
  64
  65         /* Preprocessor Checks: */
  66                 #if !defined(__INCLUDE_FROM_MS_DRIVER)
  67                         #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
  68                 #endif
  69
  70         /* Public Interface - May be used in end-application: */
  71                 /* Macros: */
  72                         /** Error code for some Mass Storage Host functions, indicating a logical (and not hardware) error. */
  73                         #define MS_ERROR_LOGICAL_CMD_FAILED              0x80
  74
  75                 /* Type Defines: */
  76                         /** \brief Mass Storage Class Host Mode Configuration and State Structure.
  77                          *
  78                          *  Class state structure. An instance of this structure should be made within the user application,
  79                          *  and passed to each of the Mass Storage class driver functions as the \c MSInterfaceInfo parameter. This
  80                          *  stores each Mass Storage interface's configuration and state information.
  81                          */
  82                         typedef struct
  83                         {
  84                                 const struct
  85                                 {
  86                                         uint8_t  DataINPipeNumber; /**< Pipe number of the Mass Storage interface's IN data pipe. */
  87                                         bool     DataINPipeDoubleBank; /**< Indicates if the Mass Storage interface's IN data pipe should use double banking. */
  88
  89                                         uint8_t  DataOUTPipeNumber; /**< Pipe number of the Mass Storage interface's OUT data pipe. */
  90                                         bool     DataOUTPipeDoubleBank; /**< Indicates if the Mass Storage interface's OUT data pipe should use double banking. */
  91                                 } Config; /**< Config data for the USB class interface within the device. All elements in this section
  92                                            *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.
  93                                            */
  94                                 struct
  95                                 {
  96                                         bool     IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
  97                                                             *   after \ref MS_Host_ConfigurePipes() is called and the Host state machine is in the
  98                                                             *   Configured state.
  99                                                             */
 100                                         uint8_t  InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device. */
 101
 102                                         uint16_t DataINPipeSize; /**< Size in bytes of the Mass Storage interface's IN data pipe. */
 103                                         uint16_t DataOUTPipeSize;  /**< Size in bytes of the Mass Storage interface's OUT data pipe. */
 104
 105                                         uint32_t TransactionTag; /**< Current transaction tag for data synchronizing of packets. */
 106                                 } State; /**< State data for the USB class interface within the device. All elements in this section
 107                                                   *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when
 108                                                   *   the interface is enumerated.
 109                                                   */
 110                         } USB_ClassInfo_MS_Host_t;
 111
 112                         /** \brief SCSI Device LUN Capacity Structure.
 113                          *
 114                          *  SCSI capacity structure, to hold the total capacity of the device in both the number
 115                          *  of blocks in the current LUN, and the size of each block. This structure is filled by
 116                          *  the device when the \ref MS_Host_ReadDeviceCapacity() function is called.
 117                          */
 118                         typedef struct
 119                         {
 120                                 uint32_t Blocks; /**< Number of blocks in the addressed LUN of the device. */
 121                                 uint32_t BlockSize; /**< Number of bytes in each block in the addressed LUN. */
 122                         } SCSI_Capacity_t;
 123
 124                 /* Enums: */
 125                         enum MS_Host_EnumerationFailure_ErrorCodes_t
 126                         {
 127                                 MS_ENUMERROR_NoError                    = 0, /**< Configuration Descriptor was processed successfully. */
 128                                 MS_ENUMERROR_InvalidConfigDescriptor    = 1, /**< The device returned an invalid Configuration Descriptor. */
 129                                 MS_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Mass Storage interface was not found in the device's Configuration Descriptor. */
 130                                 MS_ENUMERROR_PipeConfigurationFailed    = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
 131                         };
 132
 133                 /* Function Prototypes: */
 134                         /** Host interface configuration routine, to configure a given Mass Storage host interface instance using the
 135                          *  Configuration Descriptor read from an attached USB device. This function automatically updates the given Mass
 136                          *  Storage Host instance's state values and configures the pipes required to communicate with the interface if it
 137                          *  is found within the device. This should be called once after the stack has enumerated the attached device, while
 138                          *  the host state machine is in the Addressed state.
 139                          *
 140                          *  \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other
 141                          *        interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes
 142                          *        within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes.
 143                          *
 144                          *  \param[in,out] MSInterfaceInfo       Pointer to a structure containing an MS Class host configuration and state.
 145                          *  \param[in]     ConfigDescriptorSize  Length of the attached device's Configuration Descriptor.
 146                          *  \param[in]     ConfigDescriptorData  Pointer to a buffer containing the attached device's Configuration Descriptor.
 147                          *
 148                          *  \return A value from the \ref MS_Host_EnumerationFailure_ErrorCodes_t enum.
 149                          */
 150                         uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 151                                                        uint16_t ConfigDescriptorSize,
 152                                                        void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
 153
 154                         /** Sends a MASS STORAGE RESET control request to the attached device, resetting the Mass Storage Interface
 155                          *  and readying it for the next Mass Storage command.
 156                          *
 157                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 158                          *
 159                          *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
 160                          */
 161                         uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 162
 163                         /** Sends a GET MAX LUN control request to the attached device, retrieving the index of the highest LUN (Logical
 164                          *  UNit, a logical drive) in the device. This value can then be used in the other functions of the Mass Storage
 165                          *  Host mode Class driver to address a specific LUN within the device.
 166                          *
 167                          *  \note Some devices do not support this request, and will STALL it when issued. To get around this,
 168                          *        on unsupported devices the max LUN index will be reported as zero and no error will be returned
 169                          *        if the device STALLs the request.
 170                          *
 171                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 172                          *  \param[out]    MaxLUNIndex      Pointer to a location where the highest LUN index value should be stored.
 173                          *
 174                          *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
 175                          */
 176                         uint8_t MS_Host_GetMaxLUN(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 177                                                   uint8_t* const MaxLUNIndex) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 178
 179                         /** Retrieves the Mass Storage device's inquiry data for the specified LUN, indicating the device characteristics and
 180                          *  properties.
 181                          *
 182                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 183                          *       call will fail.
 184                          *
 185                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 186                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 187                          *  \param[out]    InquiryData      Location where the read inquiry data should be stored.
 188                          *
 189                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED.
 190                          */
 191                         uint8_t MS_Host_GetInquiryData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 192                                                        const uint8_t LUNIndex,
 193                                                        SCSI_Inquiry_Response_t* const InquiryData) ATTR_NON_NULL_PTR_ARG(1)
 194                                                        ATTR_NON_NULL_PTR_ARG(3);
 195
 196                         /** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands.
 197                          *
 198                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 199                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 200                          *
 201                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
 202                          */
 203                         uint8_t MS_Host_TestUnitReady(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 204                                                       const uint8_t LUNIndex) ATTR_NON_NULL_PTR_ARG(1);
 205
 206                         /** Retrieves the total capacity of the attached USB Mass Storage device, in blocks, and block size.
 207                          *
 208                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 209                          *       call will fail.
 210                          *
 211                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 212                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 213                          *  \param[out]    DeviceCapacity   Pointer to the location where the capacity information should be stored.
 214                          *
 215                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
 216                          */
 217                         uint8_t MS_Host_ReadDeviceCapacity(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 218                                                            const uint8_t LUNIndex,
 219                                                            SCSI_Capacity_t* const DeviceCapacity) ATTR_NON_NULL_PTR_ARG(1)
 220                                                            ATTR_NON_NULL_PTR_ARG(3);
 221
 222                         /** Retrieves the device sense data, indicating the current device state and error codes for the previously
 223                          *  issued command.
 224                          *
 225                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 226                          *       call will fail.
 227                          *
 228                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 229                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 230                          *  \param[out]    SenseData        Pointer to the location where the sense information should be stored.
 231                          *
 232                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
 233                          */
 234                         uint8_t MS_Host_RequestSense(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 235                                                      const uint8_t LUNIndex,
 236                                                      SCSI_Request_Sense_Response_t* const SenseData) ATTR_NON_NULL_PTR_ARG(1)
 237                                                      ATTR_NON_NULL_PTR_ARG(3);
 238
 239                         /** Issues a PREVENT MEDIUM REMOVAL command, to logically (or, depending on the type of device, physically) lock
 240                          *  the device from removal so that blocks of data on the medium can be read or altered.
 241                          *
 242                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 243                          *       call will fail.
 244                          *
 245                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 246                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 247                          *  \param[in]     PreventRemoval   Boolean \c true if the device should be locked from removal, \c false otherwise.
 248                          *
 249                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
 250                          */
 251                         uint8_t MS_Host_PreventAllowMediumRemoval(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 252                                                                   const uint8_t LUNIndex,
 253                                                                   const bool PreventRemoval) ATTR_NON_NULL_PTR_ARG(1);
 254
 255                         /** Reads blocks of data from the attached Mass Storage device's medium.
 256                          *
 257                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 258                          *       call will fail.
 259                          *
 260                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 261                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 262                          *  \param[in]     BlockAddress     Starting block address within the device to read from.
 263                          *  \param[in]     Blocks           Total number of blocks to read.
 264                          *  \param[in]     BlockSize        Size in bytes of each block within the device.
 265                          *  \param[out]    BlockBuffer      Pointer to where the read data from the device should be stored.
 266                          *
 267                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
 268                          */
 269                         uint8_t MS_Host_ReadDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 270                                                          const uint8_t LUNIndex,
 271                                                          const uint32_t BlockAddress,
 272                                                          const uint8_t Blocks,
 273                                                          const uint16_t BlockSize,
 274                                                          void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
 275
 276                         /** Writes blocks of data to the attached Mass Storage device's medium.
 277                          *
 278                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 279                          *       call will fail.
 280                          *
 281                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing a MS Class host configuration and state.
 282                          *  \param[in]     LUNIndex         LUN index within the device the command is being issued to.
 283                          *  \param[in]     BlockAddress     Starting block address within the device to write to.
 284                          *  \param[in]     Blocks           Total number of blocks to read.
 285                          *  \param[in]     BlockSize        Size in bytes of each block within the device.
 286                          *  \param[in]     BlockBuffer      Pointer to where the data to write should be sourced from.
 287                          *
 288                          *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
 289                          */
 290                         uint8_t MS_Host_WriteDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 291                                                           const uint8_t LUNIndex,
 292                                                           const uint32_t BlockAddress,
 293                                                           const uint8_t Blocks,
 294                                                           const uint16_t BlockSize,
 295                                                           const void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
 296
 297                 /* Inline Functions: */
 298                         /** General management task for a given Mass Storage host class interface, required for the correct operation of
 299                          *  the interface. This should be called frequently in the main program loop, before the master USB management task
 300                          *  \ref USB_USBTask().
 301                          *
 302                          *  \param[in,out] MSInterfaceInfo  Pointer to a structure containing an Mass Storage Class host configuration and state.
 303                          */
 304                         static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo);
 305                         static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)
 306                         {
 307                                 (void)MSInterfaceInfo;
 308                         }
 309
 310         /* Private Interface - For use in library only: */
 311         #if !defined(__DOXYGEN__)
 312                 /* Macros: */
 313                         #define MS_COMMAND_DATA_TIMEOUT_MS        10000
 314
 315                 /* Function Prototypes: */
 316                         #if defined(__INCLUDE_FROM_MASSSTORAGE_HOST_C)
 317                                 static uint8_t DCOMP_MS_Host_NextMSInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
 318                                 static uint8_t DCOMP_MS_Host_NextMSInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
 319
 320                                 static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 321                                                                    MS_CommandBlockWrapper_t* const SCSICommandBlock,
 322                                                                    const void* const BufferPtr) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 323                                 static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 324                                 static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 325                                                                        MS_CommandBlockWrapper_t* const SCSICommandBlock,
 326                                                                        void* BufferPtr) ATTR_NON_NULL_PTR_ARG(1)  ATTR_NON_NULL_PTR_ARG(2);
 327                                 static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
 328                                                                          MS_CommandStatusWrapper_t* const SCSICommandStatus)
 329                                                                          ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 330                         #endif
 331         #endif
 332
 333         /* Disable C linkage for C++ Compilers: */
 334                 #if defined(__cplusplus)
 335                         }
 336                 #endif
 337
 338 #endif
 339
 340 /** @} */
 341