Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2009.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6       www.fourwalledcubicle.com
   7 */
   8
   9 /*
  10   Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, and distribute this software
  13   and its documentation for any purpose and without fee is hereby
  14   granted, provided that the above copyright notice appear in all
  15   copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of
  34  *  the demo and is responsible for the initial application hardware configuration.
  35  */
  36
  37 #include "KeyboardHostWithParser.h"
  38
  39 /* Project Tags, for reading out using the ButtLoad project */
  40 BUTTLOADTAG(ProjName,    "LUFA KBD Host App");
  41 BUTTLOADTAG(BuildTime,   __TIME__);
  42 BUTTLOADTAG(BuildDate,   __DATE__);
  43 BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING);
  44
  45 /* Scheduler Task List */
  46 TASK_LIST
  47 {
  48         { Task: USB_USBTask          , TaskStatus: TASK_STOP },
  49         { Task: USB_Keyboard_Host    , TaskStatus: TASK_STOP },
  50 };
  51
  52
  53 /** Main program entry point. This routine configures the hardware required by the application, then
  54  *  starts the scheduler to run the application tasks.
  55  */
  56 int main(void)
  57 {
  58         /* Disable watchdog if enabled by bootloader/fuses */
  59         MCUSR &= ~(1 << WDRF);
  60         wdt_disable();
  61
  62         /* Disable clock division */
  63         clock_prescale_set(clock_div_1);
  64
  65         /* Hardware Initialization */
  66         SerialStream_Init(9600, false);
  67         LEDs_Init();
  68
  69         /* Indicate USB not ready */
  70         UpdateStatus(Status_USBNotReady);
  71
  72         /* Initialize Scheduler so that it can be used */
  73         Scheduler_Init();
  74
  75         /* Initialize USB Subsystem */
  76         USB_Init();
  77
  78         /* Start-up message */
  79         puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
  80                "Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
  81
  82         /* Scheduling - routine never returns, so put this last in the main function */
  83         Scheduler_Start();
  84 }
  85
  86 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
  87  *  starts the library USB task to begin the enumeration and USB management process.
  88  */
  89 EVENT_HANDLER(USB_DeviceAttached)
  90 {
  91         puts_P(PSTR("Device Attached.\r\n"));
  92         UpdateStatus(Status_USBEnumerating);
  93
  94         /* Start USB management task to enumerate the device */
  95         Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
  96 }
  97
  98 /** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
  99  *  stops the library USB task management process.
 100  */
 101 EVENT_HANDLER(USB_DeviceUnattached)
 102 {
 103         /* Stop keyboard and USB management task */
 104         Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
 105         Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_STOP);
 106
 107         puts_P(PSTR("\r\nDevice Unattached.\r\n"));
 108         UpdateStatus(Status_USBNotReady);
 109 }
 110
 111 /** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
 112  *  enumerated by the host and is now ready to be used by the application.
 113  */
 114 EVENT_HANDLER(USB_DeviceEnumerationComplete)
 115 {
 116         /* Start Keyboard Host task */
 117         Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_RUN);
 118
 119         /* Indicate device enumeration complete */
 120         UpdateStatus(Status_USBReady);
 121 }
 122
 123 /** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
 124 EVENT_HANDLER(USB_HostError)
 125 {
 126         USB_ShutDown();
 127
 128         puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
 129         printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
 130
 131         UpdateStatus(Status_HardwareError);
 132         for(;;);
 133 }
 134
 135 /** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
 136  *  enumerating an attached USB device.
 137  */
 138 EVENT_HANDLER(USB_DeviceEnumerationFailed)
 139 {
 140         puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
 141         printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
 142         printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
 143         printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
 144
 145         UpdateStatus(Status_EnumerationError);
 146 }
 147
 148 /** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
 149  *  log to a serial port, or anything else that is suitable for status updates.
 150  *
 151  *  \param CurrentStatus  Current status of the system, from the KeyboardHostWithParser_StatusCodes_t enum
 152  */
 153 void UpdateStatus(uint8_t CurrentStatus)
 154 {
 155         uint8_t LEDMask = LEDS_NO_LEDS;
 156
 157         /* Set the LED mask to the appropriate LED mask based on the given status code */
 158         switch (CurrentStatus)
 159         {
 160                 case Status_USBNotReady:
 161                         LEDMask = (LEDS_LED1);
 162                         break;
 163                 case Status_USBEnumerating:
 164                         LEDMask = (LEDS_LED1 | LEDS_LED2);
 165                         break;
 166                 case Status_USBReady:
 167                         LEDMask = (LEDS_LED2);
 168                         break;
 169                 case Status_EnumerationError:
 170                 case Status_HardwareError:
 171                         LEDMask = (LEDS_LED1 | LEDS_LED3);
 172                         break;
 173                 case Status_Busy:
 174                         LEDMask = (LEDS_LED1 | LEDS_LED4);
 175                         break;
 176         }
 177
 178         /* Set the board LEDs to the new LED mask */
 179         LEDs_SetAllLEDs(LEDMask);
 180 }
 181
 182 /** Task to set the configuration of the attached device after it has been enumerated, and to read and process
 183  *  the HID report descriptor and HID reports from the device and display the results onto the board LEDs.
 184  */
 185 TASK(USB_Keyboard_Host)
 186 {
 187         uint8_t ErrorCode;
 188
 189         switch (USB_HostState)
 190         {
 191                 case HOST_STATE_Addressed:
 192                         /* Standard request to set the device configuration to configuration 1 */
 193                         USB_HostRequest = (USB_Host_Request_Header_t)
 194                                 {
 195                                         bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
 196                                         bRequest:      REQ_SetConfiguration,
 197                                         wValue:        1,
 198                                         wIndex:        0,
 199                                         wLength:       0,
 200                                 };
 201
 202                         /* Send the request, display error and wait for device detach if request fails */
 203                         if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
 204                         {
 205                                 puts_P(PSTR("Control Error (Set Configuration).\r\n"));
 206                                 printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
 207
 208                                 /* Indicate error via status LEDs */
 209                                 UpdateStatus(Status_EnumerationError);
 210
 211                                 /* Wait until USB device disconnected */
 212                                 while (USB_IsConnected);
 213                                 break;
 214                         }
 215
 216                         USB_HostState = HOST_STATE_Configured;
 217                         break;
 218                 case HOST_STATE_Configured:
 219                         puts_P(PSTR("Getting Config Data.\r\n"));
 220
 221                         /* Get and process the configuration descriptor data */
 222                         if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
 223                         {
 224                                 if (ErrorCode == ControlError)
 225                                   puts_P(PSTR("Control Error (Get Configuration).\r\n"));
 226                                 else
 227                                   puts_P(PSTR("Invalid Device.\r\n"));
 228
 229                                 printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
 230
 231                                 /* Indicate error via status LEDs */
 232                                 UpdateStatus(Status_EnumerationError);
 233
 234                                 /* Wait until USB device disconnected */
 235                                 while (USB_IsConnected);
 236                                 break;
 237                         }
 238
 239                         puts_P(PSTR("Processing HID Report.\r\n"));
 240
 241                         /* LEDs one and two on to indicate busy processing */
 242                         UpdateStatus(Status_Busy);
 243
 244                         /* Get and process the device's first HID report descriptor */
 245                         if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
 246                         {
 247                                 puts_P(PSTR("Report Parse Error.\r\n"));
 248                                 printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
 249
 250                                 /* Indicate error via status LEDs */
 251                                 UpdateStatus(Status_EnumerationError);
 252
 253                                 /* Wait until USB device disconnected */
 254                                 while (USB_IsConnected);
 255                                 break;
 256                         }
 257
 258                         /* All LEDs off - ready to indicate key presses */
 259                         UpdateStatus(Status_USBReady);
 260
 261                         puts_P(PSTR("Keyboard Enumerated.\r\n"));
 262
 263                         USB_HostState = HOST_STATE_Ready;
 264                         break;
 265                 case HOST_STATE_Ready:
 266                         /* Select and unfreeze keyboard data pipe */
 267                         Pipe_SelectPipe(KEYBOARD_DATAPIPE);
 268                         Pipe_Unfreeze();
 269
 270                         /* Check if data has been received from the attached keyboard */
 271                         if (Pipe_ReadWriteAllowed())
 272                         {
 273                                 /* Create buffer big enough for the report */
 274                                 uint8_t KeyboardReport[Pipe_BytesInPipe()];
 275
 276                                 /* Load in the keyboard report */
 277                                 Pipe_Read_Stream_LE(KeyboardReport, Pipe_BytesInPipe());
 278
 279                                 /* Clear the IN endpoint, ready for next data packet */
 280                                 Pipe_ClearCurrentBank();
 281
 282                                 /* Check each HID report item in turn, looking for keyboard scan code reports */
 283                                 for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
 284                                 {
 285                                         /* Create a temporary item pointer to the next report item */
 286                                         HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
 287
 288                                         /* Check if the current report item is a keyboard scancode */
 289                                         if ((ReportItem->Attributes.Usage.Page      == USAGE_PAGE_KEYBOARD) &&
 290                                             (ReportItem->Attributes.BitSize         == 8)                   &&
 291                                             (ReportItem->Attributes.Logical.Maximum > 1)                    &&
 292                                             (ReportItem->ItemType                   == REPORT_ITEM_TYPE_In))
 293                                         {
 294                                                 /* Retrieve the keyboard scancode from the report data retrieved from the device */
 295                                                 bool FoundData = GetReportItemInfo(KeyboardReport, ReportItem);
 296
 297                                                 /* For multi-report devices - if the requested data was not in the issued report, continue */
 298                                                 if (!(FoundData))
 299                                                   continue;
 300
 301                                                 /* Key code is an unsigned char in length, cast to the appropriate type */
 302                                                 uint8_t KeyCode = (uint8_t)ReportItem->Value;
 303
 304                                                 /* If scancode is non-zero, a key is being pressed */
 305                                                 if (KeyCode)
 306                                                 {
 307                                                         /* Toggle status LED to indicate keypress */
 308                                                         if (LEDs_GetLEDs() & LEDS_LED2)
 309                                                           LEDs_TurnOffLEDs(LEDS_LED2);
 310                                                         else
 311                                                           LEDs_TurnOnLEDs(LEDS_LED2);
 312
 313                                                         char PressedKey = 0;
 314
 315                                                         /* Convert scancode to printable character if alphanumeric */
 316                                                         if ((KeyCode >= 0x04) && (KeyCode <= 0x1D))
 317                                                           PressedKey = (KeyCode - 0x04) + 'A';
 318                                                         else if ((KeyCode >= 0x1E) && (KeyCode <= 0x27))
 319                                                           PressedKey = (KeyCode - 0x1E) + '0';
 320                                                         else if (KeyCode == 0x2C)
 321                                                           PressedKey = ' ';
 322                                                         else if (KeyCode == 0x28)
 323                                                           PressedKey = '\n';
 324
 325                                                         /* Print the pressed key character out through the serial port if valid */
 326                                                         if (PressedKey)
 327                                                           putchar(PressedKey);
 328                                                 }
 329
 330                                                 /* Once a scancode is found, stop scanning through the report items */
 331                                                 break;
 332                                         }
 333                                 }
 334                         }
 335
 336                         /* Freeze keyboard data pipe */
 337                         Pipe_Freeze();
 338                         break;
 339         }
 340 }