Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2021.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2021  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaims all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Main source file for the AudioInputHost demo. This file contains the main tasks of
  34  *  the demo and is responsible for the initial application hardware configuration.
  35  */
  36
  37 #include "AudioInputHost.h"
  38
  39 /** LUFA Audio Class driver interface configuration and state information. This structure is
  40  *  passed to all Audio Class driver functions, so that multiple instances of the same class
  41  *  within a device can be differentiated from one another.
  42  */
  43 USB_ClassInfo_Audio_Host_t Microphone_Audio_Interface =
  44         {
  45                 .Config =
  46                         {
  47                                 .DataINPipe             =
  48                                         {
  49                                                 .Address        = (PIPE_DIR_IN  | 1),
  50                                         },
  51                         },
  52         };
  53
  54
  55 /** Main program entry point. This routine configures the hardware required by the application, then
  56  *  enters a loop to run the application tasks in sequence.
  57  */
  58 int main(void)
  59 {
  60         SetupHardware();
  61
  62         puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));
  63
  64         LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
  65         GlobalInterruptEnable();
  66
  67         for (;;)
  68         {
  69                 Audio_Host_USBTask(&Microphone_Audio_Interface);
  70                 USB_USBTask();
  71         }
  72 }
  73
  74 /** ISR to handle the reloading of the PWM timer with the next sample. */
  75 ISR(TIMER0_COMPA_vect, ISR_BLOCK)
  76 {
  77         uint8_t PrevPipe = Pipe_GetCurrentPipe();
  78
  79         /* Check that the USB bus is ready for the next sample to read */
  80         if (Audio_Host_IsSampleReceived(&Microphone_Audio_Interface))
  81         {
  82                 /* Retrieve the signed 16-bit audio sample, convert to 8-bit */
  83                 int8_t Sample_8Bit = (Audio_Host_ReadSample16(&Microphone_Audio_Interface) >> 8);
  84
  85                 /* Load the sample into the PWM timer channel */
  86                 OCR3A = (Sample_8Bit ^ (1 << 7));
  87
  88                 uint8_t LEDMask = LEDS_NO_LEDS;
  89
  90                 /* Turn on LEDs as the sample amplitude increases */
  91                 if (Sample_8Bit > 16)
  92                   LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
  93                 else if (Sample_8Bit > 8)
  94                   LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
  95                 else if (Sample_8Bit > 4)
  96                   LEDMask = (LEDS_LED1 | LEDS_LED2);
  97                 else if (Sample_8Bit > 2)
  98                   LEDMask = (LEDS_LED1);
  99
 100                 LEDs_SetAllLEDs(LEDMask);
 101         }
 102
 103         Pipe_SelectPipe(PrevPipe);
 104 }
 105
 106 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 107 void SetupHardware(void)
 108 {
 109 #if (ARCH == ARCH_AVR8)
 110         /* Disable watchdog if enabled by bootloader/fuses */
 111         MCUSR &= ~(1 << WDRF);
 112         wdt_disable();
 113
 114         /* Disable clock division */
 115         clock_prescale_set(clock_div_1);
 116 #endif
 117
 118         /* Hardware Initialization */
 119         Serial_Init(9600, false);
 120         LEDs_Init();
 121         USB_Init();
 122
 123         /* Create a stdio stream for the serial port for stdin and stdout */
 124         Serial_CreateStream(NULL);
 125 }
 126
 127 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
 128  *  starts the library USB task to begin the enumeration and USB management process.
 129  */
 130 void EVENT_USB_Host_DeviceAttached(void)
 131 {
 132         puts_P(PSTR("Device Attached.\r\n"));
 133         LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 134 }
 135
 136 /** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
 137  *  stops the library USB task management process.
 138  */
 139 void EVENT_USB_Host_DeviceUnattached(void)
 140 {
 141         puts_P(PSTR("\r\nDevice Unattached.\r\n"));
 142         LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 143 }
 144
 145 /** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
 146  *  enumerated by the host and is now ready to be used by the application.
 147  */
 148 void EVENT_USB_Host_DeviceEnumerationComplete(void)
 149 {
 150         LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 151
 152         uint16_t ConfigDescriptorSize;
 153         uint8_t  ConfigDescriptorData[512];
 154
 155         if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
 156                                                sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
 157         {
 158                 puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
 159                 LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 160                 return;
 161         }
 162
 163         if (Audio_Host_ConfigurePipes(&Microphone_Audio_Interface,
 164                                       ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
 165         {
 166                 puts_P(PSTR("Attached Device Not a Valid Audio Input Device.\r\n"));
 167                 LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 168                 return;
 169         }
 170
 171         if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
 172         {
 173                 puts_P(PSTR("Error Setting Device Configuration.\r\n"));
 174                 LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 175                 return;
 176         }
 177
 178         if (Audio_Host_StartStopStreaming(&Microphone_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
 179         {
 180                 puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
 181                 LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 182                 USB_Host_SetDeviceConfiguration(0);
 183                 return;
 184         }
 185
 186         USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
 187         if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipe.Address,
 188                                               AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
 189                                               sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
 190         {
 191                 puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
 192                 LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 193                 USB_Host_SetDeviceConfiguration(0);
 194                 return;
 195         }
 196
 197         /* Sample reload timer initialization */
 198         TIMSK0  = (1 << OCIE0A);
 199         OCR0A   = ((F_CPU / 8 / 48000) - 1);
 200         TCCR0A  = (1 << WGM01);  // CTC mode
 201         TCCR0B  = (1 << CS01);   // Fcpu/8 speed
 202
 203         /* Set speaker as output */
 204         DDRC   |= (1 << 6);
 205
 206         /* PWM speaker timer initialization */
 207         TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP
 208         TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
 209
 210         puts_P(PSTR("Audio Device Enumerated.\r\n"));
 211         LEDs_SetAllLEDs(LEDMASK_USB_READY);
 212 }
 213
 214 /** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
 215 void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
 216 {
 217         USB_Disable();
 218
 219         printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
 220                                  " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
 221
 222         LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 223         for(;;);
 224 }
 225
 226 /** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
 227  *  enumerating an attached USB device.
 228  */
 229 void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
 230                                             const uint8_t SubErrorCode)
 231 {
 232         printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
 233                                  " -- Error Code %d\r\n"
 234                                  " -- Sub Error Code %d\r\n"
 235                                  " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
 236
 237         LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 238 }
 239