Demos/Device/LowLevel/RNDISEthernet/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #     Typical values are:
  78 #         F_CPU =  1000000
  79 #         F_CPU =  1843200
  80 #         F_CPU =  2000000
  81 #         F_CPU =  3686400
  82 #         F_CPU =  4000000
  83 #         F_CPU =  7372800
  84 #         F_CPU =  8000000
  85 #         F_CPU = 11059200
  86 #         F_CPU = 14745600
  87 #         F_CPU = 16000000
  88 #         F_CPU = 18432000
  89 #         F_CPU = 20000000
  90 F_CPU = 8000000
  91
  92
  93 # Input clock frequency.
  94 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  95 #     input clock frequency (before any prescaling is performed). This value may
  96 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  97 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  98 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  99 #     at the end, this will be done automatically to create a 32-bit value in your
 100 #     source code.
 101 #
 102 #     If no clock division is performed on the input clock inside the AVR (via the
 103 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 104 F_CLOCK = $(F_CPU)
 105
 106
 107 # Output format. (can be srec, ihex, binary)
 108 FORMAT = ihex
 109
 110
 111 # Target file name (without extension).
 112 TARGET = RNDISEthernet
 113
 114
 115 # Object files directory
 116 #     To put object files in current directory, use a dot (.), do NOT make
 117 #     this an empty or blank macro!
 118 OBJDIR = .
 119
 120
 121 # Path to the LUFA library
 122 LUFA_PATH = ../../../..
 123
 124
 125 # LUFA library compile-time options
 126 LUFA_OPTS  = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
 127 LUFA_OPTS += -D NO_STREAM_CALLBACKS
 128 LUFA_OPTS += -D USB_DEVICE_ONLY
 129 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 130 LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1
 131 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 132 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 133
 134
 135 # List C source files here. (C dependencies are automatically generated.)
 136 SRC = $(TARGET).c                                                 \
 137       Descriptors.c                                               \
 138       Lib/RNDIS.c                                                 \
 139           Lib/Ethernet.c                                              \
 140           Lib/ProtocolDecoders.c                                      \
 141           Lib/ICMP.c                                                  \
 142           Lib/TCP.c                                                   \
 143           Lib/UDP.c                                                   \
 144           Lib/DHCP.c                                                  \
 145           Lib/ARP.c                                                   \
 146           Lib/IP.c                                                    \
 147           Lib/Webserver.c                                             \
 148           $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c         \
 149           $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 151           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 152           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 153           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 154           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 155           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 156           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 157           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 158           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 159           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 160
 161
 162 # List C++ source files here. (C dependencies are automatically generated.)
 163 CPPSRC =
 164
 165
 166 # List Assembler source files here.
 167 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 168 #     will not be considered source files but generated files (assembler
 169 #     output from the compiler), and will be deleted upon "make clean"!
 170 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 171 #     it will preserve the spelling of the filenames, and gcc itself does
 172 #     care about how the name is spelled on its command-line.
 173 ASRC =
 174
 175
 176 # Optimization level, can be [0, 1, 2, 3, s].
 177 #     0 = turn off optimization. s = optimize for size.
 178 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 179 OPT = s
 180
 181
 182 # Debugging format.
 183 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 184 #     AVR Studio 4.10 requires dwarf-2.
 185 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 186 DEBUG = dwarf-2
 187
 188
 189 # List any extra directories to look for include files here.
 190 #     Each directory must be seperated by a space.
 191 #     Use forward slashes for directory separators.
 192 #     For a directory that has spaces, enclose it in quotes.
 193 EXTRAINCDIRS = $(LUFA_PATH)/
 194
 195
 196 # Compiler flag to set the C Standard level.
 197 #     c89   = "ANSI" C
 198 #     gnu89 = c89 plus GCC extensions
 199 #     c99   = ISO C99 standard (not yet fully implemented)
 200 #     gnu99 = c99 plus GCC extensions
 201 CSTANDARD = -std=gnu99
 202
 203
 204 # Place -D or -U options here for C sources
 205 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 206 CDEFS += -DNO_DECODE_ETHERNET -DNO_DECODE_ARP -DNO_DECODE_ICMP -DNO_DECODE_IP -DNO_DECODE_TCP -DNO_DECODE_UDP -DNO_DECODE_DHCP
 207
 208
 209 # Place -D or -U options here for ASM sources
 210 ADEFS = -DF_CPU=$(F_CPU)
 211
 212
 213 # Place -D or -U options here for C++ sources
 214 CPPDEFS = -DF_CPU=$(F_CPU)UL
 215 #CPPDEFS += -D__STDC_LIMIT_MACROS
 216 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 217
 218
 219
 220 #---------------- Compiler Options C ----------------
 221 #  -g*:          generate debugging information
 222 #  -O*:          optimization level
 223 #  -f...:        tuning, see GCC manual and avr-libc documentation
 224 #  -Wall...:     warning level
 225 #  -Wa,...:      tell GCC to pass this to the assembler.
 226 #    -adhlns...: create assembler listing
 227 CFLAGS = -g$(DEBUG)
 228 CFLAGS += $(CDEFS)
 229 CFLAGS += -O$(OPT)
 230 CFLAGS += -funsigned-char
 231 CFLAGS += -funsigned-bitfields
 232 CFLAGS += -ffunction-sections
 233 CFLAGS += -fpack-struct
 234 CFLAGS += -fshort-enums
 235 CFLAGS += -finline-limit=20
 236 CFLAGS += -Wall
 237 CFLAGS += -Wstrict-prototypes
 238 CFLAGS += -Wundef
 239 #CFLAGS += -fno-unit-at-a-time
 240 #CFLAGS += -Wunreachable-code
 241 #CFLAGS += -Wsign-compare
 242 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 243 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 244 CFLAGS += $(CSTANDARD)
 245
 246
 247 #---------------- Compiler Options C++ ----------------
 248 #  -g*:          generate debugging information
 249 #  -O*:          optimization level
 250 #  -f...:        tuning, see GCC manual and avr-libc documentation
 251 #  -Wall...:     warning level
 252 #  -Wa,...:      tell GCC to pass this to the assembler.
 253 #    -adhlns...: create assembler listing
 254 CPPFLAGS = -g$(DEBUG)
 255 CPPFLAGS += $(CPPDEFS)
 256 CPPFLAGS += -O$(OPT)
 257 CPPFLAGS += -funsigned-char
 258 CPPFLAGS += -funsigned-bitfields
 259 CPPFLAGS += -fpack-struct
 260 CPPFLAGS += -fshort-enums
 261 CPPFLAGS += -fno-exceptions
 262 CPPFLAGS += -Wall
 263 CFLAGS += -Wundef
 264 #CPPFLAGS += -mshort-calls
 265 #CPPFLAGS += -fno-unit-at-a-time
 266 #CPPFLAGS += -Wstrict-prototypes
 267 #CPPFLAGS += -Wunreachable-code
 268 #CPPFLAGS += -Wsign-compare
 269 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 270 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 271 #CPPFLAGS += $(CSTANDARD)
 272
 273
 274 #---------------- Assembler Options ----------------
 275 #  -Wa,...:   tell GCC to pass this to the assembler.
 276 #  -adhlns:   create listing
 277 #  -gstabs:   have the assembler create line number information; note that
 278 #             for use in COFF files, additional information about filenames
 279 #             and function names needs to be present in the assembler source
 280 #             files -- see avr-libc docs [FIXME: not yet described there]
 281 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 282 #       dump that will be displayed for a given single line of source input.
 283 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 284
 285
 286 #---------------- Library Options ----------------
 287 # Minimalistic printf version
 288 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 289
 290 # Floating point printf version (requires MATH_LIB = -lm below)
 291 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 292
 293 # If this is left blank, then it will use the Standard printf version.
 294 PRINTF_LIB =
 295 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 296 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 297
 298
 299 # Minimalistic scanf version
 300 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 301
 302 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 303 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 304
 305 # If this is left blank, then it will use the Standard scanf version.
 306 SCANF_LIB =
 307 #SCANF_LIB = $(SCANF_LIB_MIN)
 308 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 309
 310
 311 MATH_LIB = -lm
 312
 313
 314 # List any extra directories to look for libraries here.
 315 #     Each directory must be seperated by a space.
 316 #     Use forward slashes for directory separators.
 317 #     For a directory that has spaces, enclose it in quotes.
 318 EXTRALIBDIRS =
 319
 320
 321
 322 #---------------- External Memory Options ----------------
 323
 324 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 325 # used for variables (.data/.bss) and heap (malloc()).
 326 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 327
 328 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 329 # only used for heap (malloc()).
 330 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 331
 332 EXTMEMOPTS =
 333
 334
 335
 336 #---------------- Linker Options ----------------
 337 #  -Wl,...:     tell GCC to pass this to linker.
 338 #    -Map:      create map file
 339 #    --cref:    add cross reference to  map file
 340 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 341 LDFLAGS += -Wl,--relax
 342 LDFLAGS += -Wl,--gc-sections
 343 LDFLAGS += $(EXTMEMOPTS)
 344 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 345 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 346 #LDFLAGS += -T linker_script.x
 347
 348
 349
 350 #---------------- Programming Options (avrdude) ----------------
 351
 352 # Programming hardware: alf avr910 avrisp bascom bsd
 353 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 354 #
 355 # Type: avrdude -c ?
 356 # to get a full listing.
 357 #
 358 AVRDUDE_PROGRAMMER = jtagmkII
 359
 360 # com1 = serial port. Use lpt1 to connect to parallel port.
 361 AVRDUDE_PORT = usb
 362
 363 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 364 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 365
 366
 367 # Uncomment the following if you want avrdude's erase cycle counter.
 368 # Note that this counter needs to be initialized first using -Yn,
 369 # see avrdude manual.
 370 #AVRDUDE_ERASE_COUNTER = -y
 371
 372 # Uncomment the following if you do /not/ wish a verification to be
 373 # performed after programming the device.
 374 #AVRDUDE_NO_VERIFY = -V
 375
 376 # Increase verbosity level.  Please use this when submitting bug
 377 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 378 # to submit bug reports.
 379 #AVRDUDE_VERBOSE = -v -v
 380
 381 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 382 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 383 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 384 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 385
 386
 387
 388 #---------------- Debugging Options ----------------
 389
 390 # For simulavr only - target MCU frequency.
 391 DEBUG_MFREQ = $(F_CPU)
 392
 393 # Set the DEBUG_UI to either gdb or insight.
 394 # DEBUG_UI = gdb
 395 DEBUG_UI = insight
 396
 397 # Set the debugging back-end to either avarice, simulavr.
 398 DEBUG_BACKEND = avarice
 399 #DEBUG_BACKEND = simulavr
 400
 401 # GDB Init Filename.
 402 GDBINIT_FILE = __avr_gdbinit
 403
 404 # When using avarice settings for the JTAG
 405 JTAG_DEV = /dev/com1
 406
 407 # Debugging port used to communicate between GDB / avarice / simulavr.
 408 DEBUG_PORT = 4242
 409
 410 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 411 #     just set to localhost unless doing some sort of crazy debugging when
 412 #     avarice is running on a different computer.
 413 DEBUG_HOST = localhost
 414
 415
 416
 417 #============================================================================
 418
 419
 420 # Define programs and commands.
 421 SHELL = sh
 422 CC = avr-gcc
 423 OBJCOPY = avr-objcopy
 424 OBJDUMP = avr-objdump
 425 SIZE = avr-size
 426 AR = avr-ar rcs
 427 NM = avr-nm
 428 AVRDUDE = avrdude
 429 REMOVE = rm -f
 430 REMOVEDIR = rm -rf
 431 COPY = cp
 432 WINSHELL = cmd
 433
 434 # Define Messages
 435 # English
 436 MSG_ERRORS_NONE = Errors: none
 437 MSG_BEGIN = -------- begin --------
 438 MSG_END = --------  end  --------
 439 MSG_SIZE_BEFORE = Size before:
 440 MSG_SIZE_AFTER = Size after:
 441 MSG_COFF = Converting to AVR COFF:
 442 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 443 MSG_FLASH = Creating load file for Flash:
 444 MSG_EEPROM = Creating load file for EEPROM:
 445 MSG_EXTENDED_LISTING = Creating Extended Listing:
 446 MSG_SYMBOL_TABLE = Creating Symbol Table:
 447 MSG_LINKING = Linking:
 448 MSG_COMPILING = Compiling C:
 449 MSG_COMPILING_CPP = Compiling C++:
 450 MSG_ASSEMBLING = Assembling:
 451 MSG_CLEANING = Cleaning project:
 452 MSG_CREATING_LIBRARY = Creating library:
 453
 454
 455
 456
 457 # Define all object files.
 458 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 459
 460 # Define all listing files.
 461 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 462
 463
 464 # Compiler flags to generate dependency files.
 465 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 466
 467
 468 # Combine all necessary flags and optional flags.
 469 # Add target processor to flags.
 470 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 471 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 472 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 473
 474
 475
 476
 477
 478 # Default target.
 479 all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
 480
 481 # Change the build target to build a HEX file or a library.
 482 build: elf hex eep lss sym
 483 #build: lib
 484
 485
 486 elf: $(TARGET).elf
 487 hex: $(TARGET).hex
 488 eep: $(TARGET).eep
 489 lss: $(TARGET).lss
 490 sym: $(TARGET).sym
 491 LIBNAME=lib$(TARGET).a
 492 lib: $(LIBNAME)
 493
 494
 495
 496 # Eye candy.
 497 # AVR Studio 3.x does not check make's exit code but relies on
 498 # the following magic strings to be generated by the compile job.
 499 begin:
 500         @echo
 501         @echo $(MSG_BEGIN)
 502
 503 end:
 504         @echo $(MSG_END)
 505         @echo
 506
 507
 508 # Display size of file.
 509 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 510 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 511 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 512 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 513
 514 sizebefore:
 515         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 516         2>/dev/null; echo; fi
 517
 518 sizeafter:
 519         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 520         2>/dev/null; echo; fi
 521
 522 checkhooks: build
 523         @echo
 524         @echo ------- Unhooked LUFA Events -------
 525         @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
 526                    cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 527                            echo "(None)"
 528         @echo ------------------------------------
 529
 530 checklibmode:
 531         @echo
 532         @echo ----------- Library Mode -----------
 533         @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
 534                   | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
 535                   || echo "No specific mode (both device and host mode allowable)."
 536         @echo ------------------------------------
 537
 538 checkboard:
 539         @echo
 540         @echo ---------- Selected Board ----------
 541         @echo Selected board model is $(BOARD).
 542         @echo ------------------------------------
 543
 544 # Display compiler version information.
 545 gccversion :
 546         @$(CC) --version
 547
 548
 549
 550 # Program the device.
 551 program: $(TARGET).hex $(TARGET).eep
 552         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 553
 554 flip: $(TARGET).hex
 555         batchisp -hardware usb -device $(MCU) -operation erase f
 556         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 557         batchisp -hardware usb -device $(MCU) -operation start reset 0
 558
 559 dfu: $(TARGET).hex
 560         dfu-programmer $(MCU) erase
 561         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 562         dfu-programmer $(MCU) reset
 563
 564 flip-ee: $(TARGET).hex $(TARGET).eep
 565         copy $(TARGET).eep $(TARGET)eep.hex
 566         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 567         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 568         batchisp -hardware usb -device $(MCU) -operation start reset 0
 569
 570 dfu-ee: $(TARGET).hex $(TARGET).eep
 571         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 572         dfu-programmer $(MCU) reset
 573
 574
 575 # Generate avr-gdb config/init file which does the following:
 576 #     define the reset signal, load the target file, connect to target, and set
 577 #     a breakpoint at main().
 578 gdb-config:
 579         @$(REMOVE) $(GDBINIT_FILE)
 580         @echo define reset >> $(GDBINIT_FILE)
 581         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 582         @echo end >> $(GDBINIT_FILE)
 583         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 584         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 585 ifeq ($(DEBUG_BACKEND),simulavr)
 586         @echo load  >> $(GDBINIT_FILE)
 587 endif
 588         @echo break main >> $(GDBINIT_FILE)
 589
 590 debug: gdb-config $(TARGET).elf
 591 ifeq ($(DEBUG_BACKEND), avarice)
 592         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 593         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 594         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 595         @$(WINSHELL) /c pause
 596
 597 else
 598         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 599         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 600 endif
 601         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 602
 603
 604
 605
 606 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 607 COFFCONVERT = $(OBJCOPY) --debugging
 608 COFFCONVERT += --change-section-address .data-0x800000
 609 COFFCONVERT += --change-section-address .bss-0x800000
 610 COFFCONVERT += --change-section-address .noinit-0x800000
 611 COFFCONVERT += --change-section-address .eeprom-0x810000
 612
 613
 614
 615 coff: $(TARGET).elf
 616         @echo
 617         @echo $(MSG_COFF) $(TARGET).cof
 618         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 619
 620
 621 extcoff: $(TARGET).elf
 622         @echo
 623         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 624         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 625
 626
 627
 628 # Create final output files (.hex, .eep) from ELF output file.
 629 %.hex: %.elf
 630         @echo
 631         @echo $(MSG_FLASH) $@
 632         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 633
 634 %.eep: %.elf
 635         @echo
 636         @echo $(MSG_EEPROM) $@
 637         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 638         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 639
 640 # Create extended listing file from ELF output file.
 641 %.lss: %.elf
 642         @echo
 643         @echo $(MSG_EXTENDED_LISTING) $@
 644         $(OBJDUMP) -h -z -S $< > $@
 645
 646 # Create a symbol table from ELF output file.
 647 %.sym: %.elf
 648         @echo
 649         @echo $(MSG_SYMBOL_TABLE) $@
 650         $(NM) -n $< > $@
 651
 652
 653
 654 # Create library from object files.
 655 .SECONDARY : $(TARGET).a
 656 .PRECIOUS : $(OBJ)
 657 %.a: $(OBJ)
 658         @echo
 659         @echo $(MSG_CREATING_LIBRARY) $@
 660         $(AR) $@ $(OBJ)
 661
 662
 663 # Link: create ELF output file from object files.
 664 .SECONDARY : $(TARGET).elf
 665 .PRECIOUS : $(OBJ)
 666 %.elf: $(OBJ)
 667         @echo
 668         @echo $(MSG_LINKING) $@
 669         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 670
 671
 672 # Compile: create object files from C source files.
 673 $(OBJDIR)/%.o : %.c
 674         @echo
 675         @echo $(MSG_COMPILING) $<
 676         $(CC) -c $(ALL_CFLAGS) $< -o $@
 677
 678
 679 # Compile: create object files from C++ source files.
 680 $(OBJDIR)/%.o : %.cpp
 681         @echo
 682         @echo $(MSG_COMPILING_CPP) $<
 683         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 684
 685
 686 # Compile: create assembler files from C source files.
 687 %.s : %.c
 688         $(CC) -S $(ALL_CFLAGS) $< -o $@
 689
 690
 691 # Compile: create assembler files from C++ source files.
 692 %.s : %.cpp
 693         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 694
 695
 696 # Assemble: create object files from assembler source files.
 697 $(OBJDIR)/%.o : %.S
 698         @echo
 699         @echo $(MSG_ASSEMBLING) $<
 700         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 701
 702
 703 # Create preprocessed source for use in sending a bug report.
 704 %.i : %.c
 705         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 706
 707
 708 # Target: clean project.
 709 clean: begin clean_list clean_binary end
 710
 711 clean_binary:
 712         $(REMOVE) $(TARGET).hex
 713
 714 clean_list:
 715         @echo $(MSG_CLEANING)
 716         $(REMOVE) $(TARGET).eep
 717         $(REMOVE) $(TARGET)eep.hex
 718         $(REMOVE) $(TARGET).cof
 719         $(REMOVE) $(TARGET).elf
 720         $(REMOVE) $(TARGET).map
 721         $(REMOVE) $(TARGET).sym
 722         $(REMOVE) $(TARGET).lss
 723         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 724         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 725         $(REMOVE) $(SRC:.c=.s)
 726         $(REMOVE) $(SRC:.c=.d)
 727         $(REMOVE) $(SRC:.c=.i)
 728         $(REMOVEDIR) .dep
 729
 730
 731 doxygen:
 732         @echo Generating Project Documentation...
 733         @doxygen Doxygen.conf
 734         @echo Documentation Generation Complete.
 735
 736 clean_doxygen:
 737         rm -rf Documentation
 738
 739 # Create object files directory
 740 $(shell mkdir $(OBJDIR) 2>/dev/null)
 741
 742
 743 # Include the dependency files.
 744 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 745
 746
 747 # Listing of phony targets.
 748 .PHONY : all checkhooks checklibmode checkboard   \
 749 begin finish end sizebefore sizeafter gccversion  \
 750 build elf hex eep lss sym coff extcoff clean      \
 751 clean_list clean_binary program debug gdb-config  \
 752 doxygen dfu flip flip-ee dfu-ee