Projects/AVRISP-MKII/Lib/V2ProtocolParams.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2010.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6       www.fourwalledcubicle.com
   7 */
   8
   9 /*
  10   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  V2Protocol parameter handler, to process V2 Protocol device parameters.
  34  */
  35
  36 #define  INCLUDE_FROM_V2PROTOCOL_PARAMS_C
  37 #include "V2ProtocolParams.h"
  38
  39 /* Non-Volatile Parameter Values for EEPROM storage */
  40 uint8_t EEMEM EEPROM_Rest_Polarity = 0x00;
  41
  42 /* Volatile Parameter Values for RAM storage */
  43 static ParameterItem_t ParameterTable[] =
  44         {
  45                 { .ParamID          = PARAM_BUILD_NUMBER_LOW,
  46                   .ParamPrivileges  = PARAM_PRIV_READ,
  47                   .ParamValue       = (LUFA_VERSION_INTEGER >> 8)        },
  48
  49                 { .ParamID          = PARAM_BUILD_NUMBER_HIGH,
  50                   .ParamPrivileges  = PARAM_PRIV_READ,
  51                   .ParamValue       = (LUFA_VERSION_INTEGER & 0xFF),     },
  52
  53                 { .ParamID          = PARAM_HW_VER,
  54                   .ParamPrivileges  = PARAM_PRIV_READ,
  55                   .ParamValue       = 0x00                               },
  56
  57                 { .ParamID          = PARAM_SW_MAJOR,
  58                   .ParamPrivileges  = PARAM_PRIV_READ,
  59                   .ParamValue       = 0x01                               },
  60
  61                 { .ParamID          = PARAM_SW_MINOR,
  62                   .ParamPrivileges  = PARAM_PRIV_READ,
  63                   .ParamValue       = 0x0D                               },
  64
  65                 { .ParamID          = PARAM_VTARGET,
  66                   .ParamPrivileges  = PARAM_PRIV_READ,
  67                   .ParamValue       = 0x32                               },
  68
  69                 { .ParamID          = PARAM_SCK_DURATION,
  70                   .ParamPrivileges  = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
  71                   .ParamValue       = (TOTAL_ISP_PROGRAMMING_SPEEDS - 1) },
  72
  73                 { .ParamID          = PARAM_RESET_POLARITY,
  74                   .ParamPrivileges  = PARAM_PRIV_WRITE,
  75                   .ParamValue       = 0x00                               },
  76
  77                 { .ParamID          = PARAM_STATUS_TGT_CONN,
  78                   .ParamPrivileges  = PARAM_PRIV_READ,
  79                   .ParamValue       = 0x00                               },
  80
  81                 { .ParamID          = PARAM_DISCHARGEDELAY,
  82                   .ParamPrivileges  = PARAM_PRIV_WRITE,
  83                   .ParamValue       = 0x00                               },
  84         };
  85
  86
  87 /** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */
  88 void V2Params_LoadNonVolatileParamValues(void)
  89 {
  90         /* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM -
  91          *   NB: Cannot call V2Protocol_SetParameterValue() here, as that will cause another EEPROM write! */
  92         V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
  93 }
  94
  95 /** Updates any parameter values that are sourced from hardware rather than explicitly set by the host, such as
  96  *  VTARGET levels from the ADC on supported AVR models.
  97  */
  98 void V2Params_UpdateParamValues(void)
  99 {
 100         #if defined(ADC)
 101         /* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */
 102         V2Params_GetParamFromTable(PARAM_VTARGET)->ParamValue = ((5 * 10 * ADC_GetResult()) / 1024);
 103         #endif
 104 }
 105
 106 /** Retrieves the host PC read/write privileges for a given parameter in the parameter table. This should
 107  *  be called before calls to \ref V2Params_GetParameterValue() or \ref V2Params_SetParameterValue() when
 108  *  getting or setting parameter values in response to requests from the host.
 109  *
 110  *  \param[in] ParamID  Parameter ID whose privileges are to be retrieved from the table
 111  *
 112  *  \return Privileges for the requested parameter, as a mask of PARAM_PRIV_* masks
 113  */
 114 uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID)
 115 {
 116         ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
 117
 118         if (ParamInfo == NULL)
 119           return 0;
 120
 121         return ParamInfo->ParamPrivileges;
 122 }
 123
 124 /** Retrieves the current value for a given parameter in the parameter table.
 125  *
 126  *  \param[in] ParamID  Parameter ID whose value is to be retrieved from the table
 127  *
 128  *  \return Current value of the parameter in the table, or 0 if not found
 129  */
 130 uint8_t V2Params_GetParameterValue(const uint8_t ParamID)
 131 {
 132         ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
 133
 134         if (ParamInfo == NULL)
 135           return 0;
 136
 137         return ParamInfo->ParamValue;
 138 }
 139
 140 /** Sets the value for a given parameter in the parameter table.
 141  *
 142  *  \param[in] ParamID  Parameter ID whose value is to be set in the table
 143  *  \param[in] Value    New value to set the parameter to
 144  *
 145  *  \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise
 146  */
 147 void V2Params_SetParameterValue(const uint8_t ParamID, const uint8_t Value)
 148 {
 149         ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
 150
 151         if (ParamInfo == NULL)
 152           return;
 153
 154         ParamInfo->ParamValue = Value;
 155
 156         /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
 157         if (ParamID == PARAM_RESET_POLARITY)
 158           eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
 159 }
 160
 161 /** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
 162  *  parameter ID.
 163  *
 164  *  \param[in] ParamID  Parameter ID to find in the table
 165  *
 166  *  \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise
 167  */
 168 static ParameterItem_t* V2Params_GetParamFromTable(const uint8_t ParamID)
 169 {
 170         ParameterItem_t* CurrTableItem = ParameterTable;
 171
 172         /* Find the parameter in the parameter table if present */
 173         for (uint8_t TableIndex = 0; TableIndex < TABLE_PARAM_COUNT; TableIndex++)
 174         {
 175                 if (ParamID == CurrTableItem->ParamID)
 176                   return CurrTableItem;
 177
 178                 CurrTableItem++;
 179         }
 180
 181         return NULL;
 182 }