-# Doxyfile 1.5.7.1\r
-\r
-# This file describes the settings to be used by the documentation system\r
-# doxygen (www.doxygen.org) for a project\r
-#\r
-# All text after a hash (#) is considered a comment and will be ignored\r
-# The format is:\r
-# TAG = value [value, ...]\r
-# For lists items can also be appended using:\r
-# TAG += value [value, ...]\r
-# Values that contain spaces should be placed between quotes (" ")\r
-\r
-#---------------------------------------------------------------------------\r
-# Project related configuration options\r
-#---------------------------------------------------------------------------\r
-\r
-# This tag specifies the encoding used for all characters in the config file \r
-# that follow. The default is UTF-8 which is also the encoding used for all \r
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the \r
-# iconv built into libc) for the transcoding. See \r
-# http://www.gnu.org/software/libiconv for the list of possible encodings.\r
-\r
-DOXYFILE_ENCODING = UTF-8\r
-\r
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded \r
-# by quotes) that should identify the project.\r
-\r
-PROJECT_NAME = "LUFA Library - Generic HID Host Demo"\r
-\r
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. \r
-# This could be handy for archiving the generated documentation or \r
-# if some version control system is used.\r
-\r
-PROJECT_NUMBER = 0.0.0\r
-\r
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) \r
-# base path where the generated documentation will be put. \r
-# If a relative path is entered, it will be relative to the location \r
-# where doxygen was started. If left blank the current directory will be used.\r
-\r
-OUTPUT_DIRECTORY = ./Documentation/\r
-\r
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create \r
-# 4096 sub-directories (in 2 levels) under the output directory of each output \r
-# format and will distribute the generated files over these directories. \r
-# Enabling this option can be useful when feeding doxygen a huge amount of \r
-# source files, where putting all generated files in the same directory would \r
-# otherwise cause performance problems for the file system.\r
-\r
-CREATE_SUBDIRS = YES\r
-\r
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all \r
-# documentation generated by doxygen is written. Doxygen will use this \r
-# information to generate all constant output in the proper language. \r
-# The default language is English, other supported languages are: \r
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, \r
-# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, \r
-# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), \r
-# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, \r
-# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, \r
-# Spanish, Swedish, and Ukrainian.\r
-\r
-OUTPUT_LANGUAGE = English\r
-\r
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will \r
-# include brief member descriptions after the members that are listed in \r
-# the file and class documentation (similar to JavaDoc). \r
-# Set to NO to disable this.\r
-\r
-BRIEF_MEMBER_DESC = YES\r
-\r
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend \r
-# the brief description of a member or function before the detailed description. \r
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the \r
-# brief descriptions will be completely suppressed.\r
-\r
-REPEAT_BRIEF = YES\r
-\r
-# This tag implements a quasi-intelligent brief description abbreviator \r
-# that is used to form the text in various listings. Each string \r
-# in this list, if found as the leading text of the brief description, will be \r
-# stripped from the text and the result after processing the whole list, is \r
-# used as the annotated text. Otherwise, the brief description is used as-is. \r
-# If left blank, the following values are used ("$name" is automatically \r
-# replaced with the name of the entity): "The $name class" "The $name widget" \r
-# "The $name file" "is" "provides" "specifies" "contains" \r
-# "represents" "a" "an" "the"\r
-\r
-ABBREVIATE_BRIEF = "The $name class" \\r
- "The $name widget" \\r
- "The $name file" \\r
- is \\r
- provides \\r
- specifies \\r
- contains \\r
- represents \\r
- a \\r
- an \\r
- the\r
-\r
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then \r
-# Doxygen will generate a detailed section even if there is only a brief \r
-# description.\r
-\r
-ALWAYS_DETAILED_SEC = NO\r
-\r
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all \r
-# inherited members of a class in the documentation of that class as if those \r
-# members were ordinary class members. Constructors, destructors and assignment \r
-# operators of the base classes will not be shown.\r
-\r
-INLINE_INHERITED_MEMB = NO\r
-\r
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full \r
-# path before files name in the file list and in the header files. If set \r
-# to NO the shortest path that makes the file name unique will be used.\r
-\r
-FULL_PATH_NAMES = YES\r
-\r
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag \r
-# can be used to strip a user-defined part of the path. Stripping is \r
-# only done if one of the specified strings matches the left-hand part of \r
-# the path. The tag can be used to show relative paths in the file list. \r
-# If left blank the directory from which doxygen is run is used as the \r
-# path to strip.\r
-\r
-STRIP_FROM_PATH = \r
-\r
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of \r
-# the path mentioned in the documentation of a class, which tells \r
-# the reader which header file to include in order to use a class. \r
-# If left blank only the name of the header file containing the class \r
-# definition is used. Otherwise one should specify the include paths that \r
-# are normally passed to the compiler using the -I flag.\r
-\r
-STRIP_FROM_INC_PATH = \r
-\r
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter \r
-# (but less readable) file names. This can be useful is your file systems \r
-# doesn't support long names like on DOS, Mac, or CD-ROM.\r
-\r
-SHORT_NAMES = YES\r
-\r
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen \r
-# will interpret the first line (until the first dot) of a JavaDoc-style \r
-# comment as the brief description. If set to NO, the JavaDoc \r
-# comments will behave just like regular Qt-style comments \r
-# (thus requiring an explicit @brief command for a brief description.)\r
-\r
-JAVADOC_AUTOBRIEF = NO\r
-\r
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will \r
-# interpret the first line (until the first dot) of a Qt-style \r
-# comment as the brief description. If set to NO, the comments \r
-# will behave just like regular Qt-style comments (thus requiring \r
-# an explicit \brief command for a brief description.)\r
-\r
-QT_AUTOBRIEF = NO\r
-\r
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen \r
-# treat a multi-line C++ special comment block (i.e. a block of //! or /// \r
-# comments) as a brief description. This used to be the default behaviour. \r
-# The new default is to treat a multi-line C++ comment block as a detailed \r
-# description. Set this tag to YES if you prefer the old behaviour instead.\r
-\r
-MULTILINE_CPP_IS_BRIEF = NO\r
-\r
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented \r
-# member inherits the documentation from any documented member that it \r
-# re-implements.\r
-\r
-INHERIT_DOCS = YES\r
-\r
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce \r
-# a new page for each member. If set to NO, the documentation of a member will \r
-# be part of the file/class/namespace that contains it.\r
-\r
-SEPARATE_MEMBER_PAGES = NO\r
-\r
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. \r
-# Doxygen uses this value to replace tabs by spaces in code fragments.\r
-\r
-TAB_SIZE = 4\r
-\r
-# This tag can be used to specify a number of aliases that acts \r
-# as commands in the documentation. An alias has the form "name=value". \r
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to \r
-# put the command \sideeffect (or @sideeffect) in the documentation, which \r
-# will result in a user-defined paragraph with heading "Side Effects:". \r
-# You can put \n's in the value part of an alias to insert newlines.\r
-\r
-ALIASES = \r
-\r
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C \r
-# sources only. Doxygen will then generate output that is more tailored for C. \r
-# For instance, some of the names that are used will be different. The list \r
-# of all members will be omitted, etc.\r
-\r
-OPTIMIZE_OUTPUT_FOR_C = YES\r
-\r
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java \r
-# sources only. Doxygen will then generate output that is more tailored for \r
-# Java. For instance, namespaces will be presented as packages, qualified \r
-# scopes will look different, etc.\r
-\r
-OPTIMIZE_OUTPUT_JAVA = NO\r
-\r
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran \r
-# sources only. Doxygen will then generate output that is more tailored for \r
-# Fortran.\r
-\r
-OPTIMIZE_FOR_FORTRAN = NO\r
-\r
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL \r
-# sources. Doxygen will then generate output that is tailored for \r
-# VHDL.\r
-\r
-OPTIMIZE_OUTPUT_VHDL = NO\r
-\r
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want \r
-# to include (a tag file for) the STL sources as input, then you should \r
-# set this tag to YES in order to let doxygen match functions declarations and \r
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. \r
-# func(std::string) {}). This also make the inheritance and collaboration \r
-# diagrams that involve STL classes more complete and accurate.\r
-\r
-BUILTIN_STL_SUPPORT = NO\r
-\r
-# If you use Microsoft's C++/CLI language, you should set this option to YES to\r
-# enable parsing support.\r
-\r
-CPP_CLI_SUPPORT = NO\r
-\r
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. \r
-# Doxygen will parse them like normal C++ but will assume all classes use public \r
-# instead of private inheritance when no explicit protection keyword is present.\r
-\r
-SIP_SUPPORT = NO\r
-\r
-# For Microsoft's IDL there are propget and propput attributes to indicate getter \r
-# and setter methods for a property. Setting this option to YES (the default) \r
-# will make doxygen to replace the get and set methods by a property in the \r
-# documentation. This will only work if the methods are indeed getting or \r
-# setting a simple type. If this is not the case, or you want to show the \r
-# methods anyway, you should set this option to NO.\r
-\r
-IDL_PROPERTY_SUPPORT = YES\r
-\r
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC \r
-# tag is set to YES, then doxygen will reuse the documentation of the first \r
-# member in the group (if any) for the other members of the group. By default \r
-# all members of a group must be documented explicitly.\r
-\r
-DISTRIBUTE_GROUP_DOC = NO\r
-\r
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of \r
-# the same type (for instance a group of public functions) to be put as a \r
-# subgroup of that type (e.g. under the Public Functions section). Set it to \r
-# NO to prevent subgrouping. Alternatively, this can be done per class using \r
-# the \nosubgrouping command.\r
-\r
-SUBGROUPING = YES\r
-\r
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum \r
-# is documented as struct, union, or enum with the name of the typedef. So \r
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct \r
-# with name TypeT. When disabled the typedef will appear as a member of a file, \r
-# namespace, or class. And the struct will be named TypeS. This can typically \r
-# be useful for C code in case the coding convention dictates that all compound \r
-# types are typedef'ed and only the typedef is referenced, never the tag name.\r
-\r
-TYPEDEF_HIDES_STRUCT = NO\r
-\r
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to \r
-# determine which symbols to keep in memory and which to flush to disk.\r
-# When the cache is full, less often used symbols will be written to disk.\r
-# For small to medium size projects (<1000 input files) the default value is \r
-# probably good enough. For larger projects a too small cache size can cause \r
-# doxygen to be busy swapping symbols to and from disk most of the time \r
-# causing a significant performance penality. \r
-# If the system has enough physical memory increasing the cache will improve the \r
-# performance by keeping more symbols in memory. Note that the value works on \r
-# a logarithmic scale so increasing the size by one will rougly double the \r
-# memory usage. The cache size is given by this formula: \r
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, \r
-# corresponding to a cache size of 2^16 = 65536 symbols\r
-\r
-SYMBOL_CACHE_SIZE = 0\r
-\r
-#---------------------------------------------------------------------------\r
-# Build related configuration options\r
-#---------------------------------------------------------------------------\r
-\r
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in \r
-# documentation are documented, even if no documentation was available. \r
-# Private class members and static file members will be hidden unless \r
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES\r
-\r
-EXTRACT_ALL = YES\r
-\r
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class \r
-# will be included in the documentation.\r
-\r
-EXTRACT_PRIVATE = YES\r
-\r
-# If the EXTRACT_STATIC tag is set to YES all static members of a file \r
-# will be included in the documentation.\r
-\r
-EXTRACT_STATIC = YES\r
-\r
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) \r
-# defined locally in source files will be included in the documentation. \r
-# If set to NO only classes defined in header files are included.\r
-\r
-EXTRACT_LOCAL_CLASSES = YES\r
-\r
-# This flag is only useful for Objective-C code. When set to YES local \r
-# methods, which are defined in the implementation section but not in \r
-# the interface are included in the documentation. \r
-# If set to NO (the default) only methods in the interface are included.\r
-\r
-EXTRACT_LOCAL_METHODS = NO\r
-\r
-# If this flag is set to YES, the members of anonymous namespaces will be \r
-# extracted and appear in the documentation as a namespace called \r
-# 'anonymous_namespace{file}', where file will be replaced with the base \r
-# name of the file that contains the anonymous namespace. By default \r
-# anonymous namespace are hidden.\r
-\r
-EXTRACT_ANON_NSPACES = NO\r
-\r
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all \r
-# undocumented members of documented classes, files or namespaces. \r
-# If set to NO (the default) these members will be included in the \r
-# various overviews, but no documentation section is generated. \r
-# This option has no effect if EXTRACT_ALL is enabled.\r
-\r
-HIDE_UNDOC_MEMBERS = NO\r
-\r
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all \r
-# undocumented classes that are normally visible in the class hierarchy. \r
-# If set to NO (the default) these classes will be included in the various \r
-# overviews. This option has no effect if EXTRACT_ALL is enabled.\r
-\r
-HIDE_UNDOC_CLASSES = NO\r
-\r
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all \r
-# friend (class|struct|union) declarations. \r
-# If set to NO (the default) these declarations will be included in the \r
-# documentation.\r
-\r
-HIDE_FRIEND_COMPOUNDS = NO\r
-\r
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any \r
-# documentation blocks found inside the body of a function. \r
-# If set to NO (the default) these blocks will be appended to the \r
-# function's detailed documentation block.\r
-\r
-HIDE_IN_BODY_DOCS = NO\r
-\r
-# The INTERNAL_DOCS tag determines if documentation \r
-# that is typed after a \internal command is included. If the tag is set \r
-# to NO (the default) then the documentation will be excluded. \r
-# Set it to YES to include the internal documentation.\r
-\r
-INTERNAL_DOCS = NO\r
-\r
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate \r
-# file names in lower-case letters. If set to YES upper-case letters are also \r
-# allowed. This is useful if you have classes or files whose names only differ \r
-# in case and if your file system supports case sensitive file names. Windows \r
-# and Mac users are advised to set this option to NO.\r
-\r
-CASE_SENSE_NAMES = NO\r
-\r
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen \r
-# will show members with their full class and namespace scopes in the \r
-# documentation. If set to YES the scope will be hidden.\r
-\r
-HIDE_SCOPE_NAMES = NO\r
-\r
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen \r
-# will put a list of the files that are included by a file in the documentation \r
-# of that file.\r
-\r
-SHOW_INCLUDE_FILES = YES\r
-\r
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] \r
-# is inserted in the documentation for inline members.\r
-\r
-INLINE_INFO = YES\r
-\r
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen \r
-# will sort the (detailed) documentation of file and class members \r
-# alphabetically by member name. If set to NO the members will appear in \r
-# declaration order.\r
-\r
-SORT_MEMBER_DOCS = YES\r
-\r
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the \r
-# brief documentation of file, namespace and class members alphabetically \r
-# by member name. If set to NO (the default) the members will appear in \r
-# declaration order.\r
-\r
-SORT_BRIEF_DOCS = NO\r
-\r
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the \r
-# hierarchy of group names into alphabetical order. If set to NO (the default) \r
-# the group names will appear in their defined order.\r
-\r
-SORT_GROUP_NAMES = NO\r
-\r
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be \r
-# sorted by fully-qualified names, including namespaces. If set to \r
-# NO (the default), the class list will be sorted only by class name, \r
-# not including the namespace part. \r
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.\r
-# Note: This option applies only to the class list, not to the \r
-# alphabetical list.\r
-\r
-SORT_BY_SCOPE_NAME = NO\r
-\r
-# The GENERATE_TODOLIST tag can be used to enable (YES) or \r
-# disable (NO) the todo list. This list is created by putting \todo \r
-# commands in the documentation.\r
-\r
-GENERATE_TODOLIST = NO\r
-\r
-# The GENERATE_TESTLIST tag can be used to enable (YES) or \r
-# disable (NO) the test list. This list is created by putting \test \r
-# commands in the documentation.\r
-\r
-GENERATE_TESTLIST = NO\r
-\r
-# The GENERATE_BUGLIST tag can be used to enable (YES) or \r
-# disable (NO) the bug list. This list is created by putting \bug \r
-# commands in the documentation.\r
-\r
-GENERATE_BUGLIST = NO\r
-\r
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or \r
-# disable (NO) the deprecated list. This list is created by putting \r
-# \deprecated commands in the documentation.\r
-\r
-GENERATE_DEPRECATEDLIST= YES\r
-\r
-# The ENABLED_SECTIONS tag can be used to enable conditional \r
-# documentation sections, marked by \if sectionname ... \endif.\r
-\r
-ENABLED_SECTIONS = \r
-\r
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines \r
-# the initial value of a variable or define consists of for it to appear in \r
-# the documentation. If the initializer consists of more lines than specified \r
-# here it will be hidden. Use a value of 0 to hide initializers completely. \r
-# The appearance of the initializer of individual variables and defines in the \r
-# documentation can be controlled using \showinitializer or \hideinitializer \r
-# command in the documentation regardless of this setting.\r
-\r
-MAX_INITIALIZER_LINES = 30\r
-\r
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated \r
-# at the bottom of the documentation of classes and structs. If set to YES the \r
-# list will mention the files that were used to generate the documentation.\r
-\r
-SHOW_USED_FILES = YES\r
-\r
-# If the sources in your project are distributed over multiple directories \r
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy \r
-# in the documentation. The default is NO.\r
-\r
-SHOW_DIRECTORIES = YES\r
-\r
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.\r
-# This will remove the Files entry from the Quick Index and from the \r
-# Folder Tree View (if specified). The default is YES.\r
-\r
-SHOW_FILES = YES\r
-\r
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the \r
-# Namespaces page. This will remove the Namespaces entry from the Quick Index\r
-# and from the Folder Tree View (if specified). The default is YES.\r
-\r
-SHOW_NAMESPACES = YES\r
-\r
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that \r
-# doxygen should invoke to get the current version for each file (typically from \r
-# the version control system). Doxygen will invoke the program by executing (via \r
-# popen()) the command <command> <input-file>, where <command> is the value of \r
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file \r
-# provided by doxygen. Whatever the program writes to standard output \r
-# is used as the file version. See the manual for examples.\r
-\r
-FILE_VERSION_FILTER = \r
-\r
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by \r
-# doxygen. The layout file controls the global structure of the generated output files \r
-# in an output format independent way. The create the layout file that represents \r
-# doxygen's defaults, run doxygen with the -l option. You can optionally specify a \r
-# file name after the option, if omitted DoxygenLayout.xml will be used as the name \r
-# of the layout file.\r
-\r
-LAYOUT_FILE = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to warning and progress messages\r
-#---------------------------------------------------------------------------\r
-\r
-# The QUIET tag can be used to turn on/off the messages that are generated \r
-# by doxygen. Possible values are YES and NO. If left blank NO is used.\r
-\r
-QUIET = YES\r
-\r
-# The WARNINGS tag can be used to turn on/off the warning messages that are \r
-# generated by doxygen. Possible values are YES and NO. If left blank \r
-# NO is used.\r
-\r
-WARNINGS = YES\r
-\r
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings \r
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will \r
-# automatically be disabled.\r
-\r
-WARN_IF_UNDOCUMENTED = YES\r
-\r
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for \r
-# potential errors in the documentation, such as not documenting some \r
-# parameters in a documented function, or documenting parameters that \r
-# don't exist or using markup commands wrongly.\r
-\r
-WARN_IF_DOC_ERROR = YES\r
-\r
-# This WARN_NO_PARAMDOC option can be abled to get warnings for \r
-# functions that are documented, but have no documentation for their parameters \r
-# or return value. If set to NO (the default) doxygen will only warn about \r
-# wrong or incomplete parameter documentation, but not about the absence of \r
-# documentation.\r
-\r
-WARN_NO_PARAMDOC = YES\r
-\r
-# The WARN_FORMAT tag determines the format of the warning messages that \r
-# doxygen can produce. The string should contain the $file, $line, and $text \r
-# tags, which will be replaced by the file and line number from which the \r
-# warning originated and the warning text. Optionally the format may contain \r
-# $version, which will be replaced by the version of the file (if it could \r
-# be obtained via FILE_VERSION_FILTER)\r
-\r
-WARN_FORMAT = "$file:$line: $text"\r
-\r
-# The WARN_LOGFILE tag can be used to specify a file to which warning \r
-# and error messages should be written. If left blank the output is written \r
-# to stderr.\r
-\r
-WARN_LOGFILE = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the input files\r
-#---------------------------------------------------------------------------\r
-\r
-# The INPUT tag can be used to specify the files and/or directories that contain \r
-# documented source files. You may enter file names like "myfile.cpp" or \r
-# directories like "/usr/src/myproject". Separate the files or directories \r
-# with spaces.\r
-\r
-INPUT = ./\r
-\r
-# This tag can be used to specify the character encoding of the source files \r
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is \r
-# also the default input encoding. Doxygen uses libiconv (or the iconv built \r
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for \r
-# the list of possible encodings.\r
-\r
-INPUT_ENCODING = UTF-8\r
-\r
-# If the value of the INPUT tag contains directories, you can use the \r
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp \r
-# and *.h) to filter out the source-files in the directories. If left \r
-# blank the following patterns are tested: \r
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx \r
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90\r
-\r
-FILE_PATTERNS = *.h \\r
- *.c \\r
- *.txt\r
-\r
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories \r
-# should be searched for input files as well. Possible values are YES and NO. \r
-# If left blank NO is used.\r
-\r
-RECURSIVE = YES\r
-\r
-# The EXCLUDE tag can be used to specify files and/or directories that should \r
-# excluded from the INPUT source files. This way you can easily exclude a \r
-# subdirectory from a directory tree whose root is specified with the INPUT tag.\r
-\r
-EXCLUDE = Documentation/\r
-\r
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or \r
-# directories that are symbolic links (a Unix filesystem feature) are excluded \r
-# from the input.\r
-\r
-EXCLUDE_SYMLINKS = NO\r
-\r
-# If the value of the INPUT tag contains directories, you can use the \r
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude \r
-# certain files from those directories. Note that the wildcards are matched \r
-# against the file with absolute path, so to exclude all test directories \r
-# for example use the pattern */test/*\r
-\r
-EXCLUDE_PATTERNS = */LowLevel/USBMode.h\r
-\r
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names \r
-# (namespaces, classes, functions, etc.) that should be excluded from the \r
-# output. The symbol name can be a fully qualified name, a word, or if the \r
-# wildcard * is used, a substring. Examples: ANamespace, AClass, \r
-# AClass::ANamespace, ANamespace::*Test\r
-\r
-EXCLUDE_SYMBOLS = __*\r
-\r
-# The EXAMPLE_PATH tag can be used to specify one or more files or \r
-# directories that contain example code fragments that are included (see \r
-# the \include command).\r
-\r
-EXAMPLE_PATH = \r
-\r
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the \r
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp \r
-# and *.h) to filter out the source-files in the directories. If left \r
-# blank all files are included.\r
-\r
-EXAMPLE_PATTERNS = *\r
-\r
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be \r
-# searched for input files to be used with the \include or \dontinclude \r
-# commands irrespective of the value of the RECURSIVE tag. \r
-# Possible values are YES and NO. If left blank NO is used.\r
-\r
-EXAMPLE_RECURSIVE = NO\r
-\r
-# The IMAGE_PATH tag can be used to specify one or more files or \r
-# directories that contain image that are included in the documentation (see \r
-# the \image command).\r
-\r
-IMAGE_PATH = \r
-\r
-# The INPUT_FILTER tag can be used to specify a program that doxygen should \r
-# invoke to filter for each input file. Doxygen will invoke the filter program \r
-# by executing (via popen()) the command <filter> <input-file>, where <filter> \r
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an \r
-# input file. Doxygen will then use the output that the filter program writes \r
-# to standard output. If FILTER_PATTERNS is specified, this tag will be \r
-# ignored.\r
-\r
-INPUT_FILTER = \r
-\r
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern \r
-# basis. Doxygen will compare the file name with each pattern and apply the \r
-# filter if there is a match. The filters are a list of the form: \r
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further \r
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER \r
-# is applied to all files.\r
-\r
-FILTER_PATTERNS = \r
-\r
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using \r
-# INPUT_FILTER) will be used to filter the input files when producing source \r
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).\r
-\r
-FILTER_SOURCE_FILES = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to source browsing\r
-#---------------------------------------------------------------------------\r
-\r
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will \r
-# be generated. Documented entities will be cross-referenced with these sources. \r
-# Note: To get rid of all source code in the generated output, make sure also \r
-# VERBATIM_HEADERS is set to NO.\r
-\r
-SOURCE_BROWSER = NO\r
-\r
-# Setting the INLINE_SOURCES tag to YES will include the body \r
-# of functions and classes directly in the documentation.\r
-\r
-INLINE_SOURCES = NO\r
-\r
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct \r
-# doxygen to hide any special comment blocks from generated source code \r
-# fragments. Normal C and C++ comments will always remain visible.\r
-\r
-STRIP_CODE_COMMENTS = YES\r
-\r
-# If the REFERENCED_BY_RELATION tag is set to YES \r
-# then for each documented function all documented \r
-# functions referencing it will be listed.\r
-\r
-REFERENCED_BY_RELATION = NO\r
-\r
-# If the REFERENCES_RELATION tag is set to YES \r
-# then for each documented function all documented entities \r
-# called/used by that function will be listed.\r
-\r
-REFERENCES_RELATION = NO\r
-\r
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)\r
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from\r
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will\r
-# link to the source code. Otherwise they will link to the documentstion.\r
-\r
-REFERENCES_LINK_SOURCE = NO\r
-\r
-# If the USE_HTAGS tag is set to YES then the references to source code \r
-# will point to the HTML generated by the htags(1) tool instead of doxygen \r
-# built-in source browser. The htags tool is part of GNU's global source \r
-# tagging system (see http://www.gnu.org/software/global/global.html). You \r
-# will need version 4.8.6 or higher.\r
-\r
-USE_HTAGS = NO\r
-\r
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen \r
-# will generate a verbatim copy of the header file for each class for \r
-# which an include is specified. Set to NO to disable this.\r
-\r
-VERBATIM_HEADERS = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the alphabetical class index\r
-#---------------------------------------------------------------------------\r
-\r
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index \r
-# of all compounds will be generated. Enable this if the project \r
-# contains a lot of classes, structs, unions or interfaces.\r
-\r
-ALPHABETICAL_INDEX = YES\r
-\r
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then \r
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns \r
-# in which this list will be split (can be a number in the range [1..20])\r
-\r
-COLS_IN_ALPHA_INDEX = 5\r
-\r
-# In case all classes in a project start with a common prefix, all \r
-# classes will be put under the same header in the alphabetical index. \r
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that \r
-# should be ignored while generating the index headers.\r
-\r
-IGNORE_PREFIX = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the HTML output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will \r
-# generate HTML output.\r
-\r
-GENERATE_HTML = YES\r
-\r
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `html' will be used as the default path.\r
-\r
-HTML_OUTPUT = html\r
-\r
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for \r
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank \r
-# doxygen will generate files with .html extension.\r
-\r
-HTML_FILE_EXTENSION = .html\r
-\r
-# The HTML_HEADER tag can be used to specify a personal HTML header for \r
-# each generated HTML page. If it is left blank doxygen will generate a \r
-# standard header.\r
-\r
-HTML_HEADER = \r
-\r
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for \r
-# each generated HTML page. If it is left blank doxygen will generate a \r
-# standard footer.\r
-\r
-HTML_FOOTER = \r
-\r
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading \r
-# style sheet that is used by each HTML page. It can be used to \r
-# fine-tune the look of the HTML output. If the tag is left blank doxygen \r
-# will generate a default style sheet. Note that doxygen will try to copy \r
-# the style sheet file to the HTML output directory, so don't put your own \r
-# stylesheet in the HTML output directory as well, or it will be erased!\r
-\r
-HTML_STYLESHEET = \r
-\r
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, \r
-# files or namespaces will be aligned in HTML using tables. If set to \r
-# NO a bullet list will be used.\r
-\r
-HTML_ALIGN_MEMBERS = YES\r
-\r
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML \r
-# documentation will contain sections that can be hidden and shown after the \r
-# page has loaded. For this to work a browser that supports \r
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox \r
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).\r
-\r
-HTML_DYNAMIC_SECTIONS = YES\r
-\r
-# If the GENERATE_DOCSET tag is set to YES, additional index files \r
-# will be generated that can be used as input for Apple's Xcode 3 \r
-# integrated development environment, introduced with OSX 10.5 (Leopard). \r
-# To create a documentation set, doxygen will generate a Makefile in the \r
-# HTML output directory. Running make will produce the docset in that \r
-# directory and running "make install" will install the docset in \r
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find \r
-# it at startup. \r
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.\r
-\r
-GENERATE_DOCSET = NO\r
-\r
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the \r
-# feed. A documentation feed provides an umbrella under which multiple \r
-# documentation sets from a single provider (such as a company or product suite) \r
-# can be grouped.\r
-\r
-DOCSET_FEEDNAME = "Doxygen generated docs"\r
-\r
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that \r
-# should uniquely identify the documentation set bundle. This should be a \r
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen \r
-# will append .docset to the name.\r
-\r
-DOCSET_BUNDLE_ID = org.doxygen.Project\r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files \r
-# will be generated that can be used as input for tools like the \r
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) \r
-# of the generated HTML documentation.\r
-\r
-GENERATE_HTMLHELP = NO\r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can \r
-# be used to specify the file name of the resulting .chm file. You \r
-# can add a path in front of the file if the result should not be \r
-# written to the html output directory.\r
-\r
-CHM_FILE = \r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can \r
-# be used to specify the location (absolute path including file name) of \r
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run \r
-# the HTML help compiler on the generated index.hhp.\r
-\r
-HHC_LOCATION = \r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag \r
-# controls if a separate .chi index file is generated (YES) or that \r
-# it should be included in the master .chm file (NO).\r
-\r
-GENERATE_CHI = NO\r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING\r
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file\r
-# content.\r
-\r
-CHM_INDEX_ENCODING = \r
-\r
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag \r
-# controls whether a binary table of contents is generated (YES) or a \r
-# normal table of contents (NO) in the .chm file.\r
-\r
-BINARY_TOC = NO\r
-\r
-# The TOC_EXPAND flag can be set to YES to add extra items for group members \r
-# to the contents of the HTML help documentation and to the tree view.\r
-\r
-TOC_EXPAND = YES\r
-\r
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER \r
-# are set, an additional index file will be generated that can be used as input for \r
-# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated \r
-# HTML documentation.\r
-\r
-GENERATE_QHP = NO\r
-\r
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can \r
-# be used to specify the file name of the resulting .qch file. \r
-# The path specified is relative to the HTML output folder.\r
-\r
-QCH_FILE = \r
-\r
-# The QHP_NAMESPACE tag specifies the namespace to use when generating \r
-# Qt Help Project output. For more information please see \r
-# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>.\r
-\r
-QHP_NAMESPACE = org.doxygen.Project\r
-\r
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating \r
-# Qt Help Project output. For more information please see \r
-# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>.\r
-\r
-QHP_VIRTUAL_FOLDER = doc\r
-\r
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can \r
-# be used to specify the location of Qt's qhelpgenerator. \r
-# If non-empty doxygen will try to run qhelpgenerator on the generated \r
-# .qhp file .\r
-\r
-QHG_LOCATION = \r
-\r
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at \r
-# top of each HTML page. The value NO (the default) enables the index and \r
-# the value YES disables it.\r
-\r
-DISABLE_INDEX = NO\r
-\r
-# This tag can be used to set the number of enum values (range [1..20]) \r
-# that doxygen will group on one line in the generated HTML documentation.\r
-\r
-ENUM_VALUES_PER_LINE = 1\r
-\r
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index\r
-# structure should be generated to display hierarchical information.\r
-# If the tag value is set to FRAME, a side panel will be generated\r
-# containing a tree-like index structure (just like the one that \r
-# is generated for HTML Help). For this to work a browser that supports \r
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, \r
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are \r
-# probably better off using the HTML help feature. Other possible values \r
-# for this tag are: HIERARCHIES, which will generate the Groups, Directories,\r
-# and Class Hierarchy pages using a tree view instead of an ordered list;\r
-# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which\r
-# disables this behavior completely. For backwards compatibility with previous\r
-# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE\r
-# respectively.\r
-\r
-GENERATE_TREEVIEW = YES\r
-\r
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be \r
-# used to set the initial width (in pixels) of the frame in which the tree \r
-# is shown.\r
-\r
-TREEVIEW_WIDTH = 250\r
-\r
-# Use this tag to change the font size of Latex formulas included \r
-# as images in the HTML documentation. The default is 10. Note that \r
-# when you change the font size after a successful doxygen run you need \r
-# to manually remove any form_*.png images from the HTML output directory \r
-# to force them to be regenerated.\r
-\r
-FORMULA_FONTSIZE = 10\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the LaTeX output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will \r
-# generate Latex output.\r
-\r
-GENERATE_LATEX = NO\r
-\r
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `latex' will be used as the default path.\r
-\r
-LATEX_OUTPUT = latex\r
-\r
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be \r
-# invoked. If left blank `latex' will be used as the default command name.\r
-\r
-LATEX_CMD_NAME = latex\r
-\r
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to \r
-# generate index for LaTeX. If left blank `makeindex' will be used as the \r
-# default command name.\r
-\r
-MAKEINDEX_CMD_NAME = makeindex\r
-\r
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact \r
-# LaTeX documents. This may be useful for small projects and may help to \r
-# save some trees in general.\r
-\r
-COMPACT_LATEX = NO\r
-\r
-# The PAPER_TYPE tag can be used to set the paper type that is used \r
-# by the printer. Possible values are: a4, a4wide, letter, legal and \r
-# executive. If left blank a4wide will be used.\r
-\r
-PAPER_TYPE = a4wide\r
-\r
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX \r
-# packages that should be included in the LaTeX output.\r
-\r
-EXTRA_PACKAGES = \r
-\r
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for \r
-# the generated latex document. The header should contain everything until \r
-# the first chapter. If it is left blank doxygen will generate a \r
-# standard header. Notice: only use this tag if you know what you are doing!\r
-\r
-LATEX_HEADER = \r
-\r
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated \r
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will \r
-# contain links (just like the HTML output) instead of page references \r
-# This makes the output suitable for online browsing using a pdf viewer.\r
-\r
-PDF_HYPERLINKS = YES\r
-\r
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of \r
-# plain latex in the generated Makefile. Set this option to YES to get a \r
-# higher quality PDF documentation.\r
-\r
-USE_PDFLATEX = YES\r
-\r
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. \r
-# command to the generated LaTeX files. This will instruct LaTeX to keep \r
-# running if errors occur, instead of asking the user for help. \r
-# This option is also used when generating formulas in HTML.\r
-\r
-LATEX_BATCHMODE = NO\r
-\r
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not \r
-# include the index chapters (such as File Index, Compound Index, etc.) \r
-# in the output.\r
-\r
-LATEX_HIDE_INDICES = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the RTF output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output \r
-# The RTF output is optimized for Word 97 and may not look very pretty with \r
-# other RTF readers or editors.\r
-\r
-GENERATE_RTF = NO\r
-\r
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `rtf' will be used as the default path.\r
-\r
-RTF_OUTPUT = rtf\r
-\r
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact \r
-# RTF documents. This may be useful for small projects and may help to \r
-# save some trees in general.\r
-\r
-COMPACT_RTF = NO\r
-\r
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated \r
-# will contain hyperlink fields. The RTF file will \r
-# contain links (just like the HTML output) instead of page references. \r
-# This makes the output suitable for online browsing using WORD or other \r
-# programs which support those fields. \r
-# Note: wordpad (write) and others do not support links.\r
-\r
-RTF_HYPERLINKS = NO\r
-\r
-# Load stylesheet definitions from file. Syntax is similar to doxygen's \r
-# config file, i.e. a series of assignments. You only have to provide \r
-# replacements, missing definitions are set to their default value.\r
-\r
-RTF_STYLESHEET_FILE = \r
-\r
-# Set optional variables used in the generation of an rtf document. \r
-# Syntax is similar to doxygen's config file.\r
-\r
-RTF_EXTENSIONS_FILE = \r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the man page output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will \r
-# generate man pages\r
-\r
-GENERATE_MAN = NO\r
-\r
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `man' will be used as the default path.\r
-\r
-MAN_OUTPUT = man\r
-\r
-# The MAN_EXTENSION tag determines the extension that is added to \r
-# the generated man pages (default is the subroutine's section .3)\r
-\r
-MAN_EXTENSION = .3\r
-\r
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output, \r
-# then it will generate one additional man file for each entity \r
-# documented in the real man page(s). These additional files \r
-# only source the real man page, but without them the man command \r
-# would be unable to find the correct page. The default is NO.\r
-\r
-MAN_LINKS = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the XML output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_XML tag is set to YES Doxygen will \r
-# generate an XML file that captures the structure of \r
-# the code including all documentation.\r
-\r
-GENERATE_XML = NO\r
-\r
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. \r
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
-# put in front of it. If left blank `xml' will be used as the default path.\r
-\r
-XML_OUTPUT = xml\r
-\r
-# The XML_SCHEMA tag can be used to specify an XML schema, \r
-# which can be used by a validating XML parser to check the \r
-# syntax of the XML files.\r
-\r
-XML_SCHEMA = \r
-\r
-# The XML_DTD tag can be used to specify an XML DTD, \r
-# which can be used by a validating XML parser to check the \r
-# syntax of the XML files.\r
-\r
-XML_DTD = \r
-\r
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will \r
-# dump the program listings (including syntax highlighting \r
-# and cross-referencing information) to the XML output. Note that \r
-# enabling this will significantly increase the size of the XML output.\r
-\r
-XML_PROGRAMLISTING = YES\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options for the AutoGen Definitions output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will \r
-# generate an AutoGen Definitions (see autogen.sf.net) file \r
-# that captures the structure of the code including all \r
-# documentation. Note that this feature is still experimental \r
-# and incomplete at the moment.\r
-\r
-GENERATE_AUTOGEN_DEF = NO\r
-\r
-#---------------------------------------------------------------------------\r
-# configuration options related to the Perl module output\r
-#---------------------------------------------------------------------------\r
-\r
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will \r
-# generate a Perl module file that captures the structure of \r
-# the code including all documentation. Note that this \r
-# feature is still experimental and incomplete at the \r
-# moment.\r
-\r
-GENERATE_PERLMOD = NO\r
-\r
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate \r
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able \r
-# to generate PDF and DVI output from the Perl module output.\r
-\r
-PERLMOD_LATEX = NO\r
-\r
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be \r
-# nicely formatted so it can be parsed by a human reader. This is useful \r
-# if you want to understand what is going on. On the other hand, if this \r
-# tag is set to NO the size of the Perl module output will be much smaller \r
-# and Perl will parse it just the same.\r
-\r
-PERLMOD_PRETTY = YES\r
-\r
-# The names of the make variables in the generated doxyrules.make file \r
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. \r
-# This is useful so different doxyrules.make files included by the same \r
-# Makefile don't overwrite each other's variables.\r
-\r
-PERLMOD_MAKEVAR_PREFIX = \r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration options related to the preprocessor \r
-#---------------------------------------------------------------------------\r
-\r
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will \r
-# evaluate all C-preprocessor directives found in the sources and include \r
-# files.\r
-\r
-ENABLE_PREPROCESSING = YES\r
-\r
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro \r
-# names in the source code. If set to NO (the default) only conditional \r
-# compilation will be performed. Macro expansion can be done in a controlled \r
-# way by setting EXPAND_ONLY_PREDEF to YES.\r
-\r
-MACRO_EXPANSION = YES\r
-\r
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES \r
-# then the macro expansion is limited to the macros specified with the \r
-# PREDEFINED and EXPAND_AS_DEFINED tags.\r
-\r
-EXPAND_ONLY_PREDEF = YES\r
-\r
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files \r
-# in the INCLUDE_PATH (see below) will be search if a #include is found.\r
-\r
-SEARCH_INCLUDES = YES\r
-\r
-# The INCLUDE_PATH tag can be used to specify one or more directories that \r
-# contain include files that are not input files but should be processed by \r
-# the preprocessor.\r
-\r
-INCLUDE_PATH = \r
-\r
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard \r
-# patterns (like *.h and *.hpp) to filter out the header-files in the \r
-# directories. If left blank, the patterns specified with FILE_PATTERNS will \r
-# be used.\r
-\r
-INCLUDE_FILE_PATTERNS = \r
-\r
-# The PREDEFINED tag can be used to specify one or more macro names that \r
-# are defined before the preprocessor is started (similar to the -D option of \r
-# gcc). The argument of the tag is a list of macros of the form: name \r
-# or name=definition (no spaces). If the definition and the = are \r
-# omitted =1 is assumed. To prevent a macro definition from being \r
-# undefined via #undef or recursively expanded use the := operator \r
-# instead of the = operator.\r
-\r
-PREDEFINED = __DOXYGEN__\r
-\r
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then \r
-# this tag can be used to specify a list of macro names that should be expanded. \r
-# The macro definition that is found in the sources will be used. \r
-# Use the PREDEFINED tag if you want to use a different macro definition.\r
-\r
-EXPAND_AS_DEFINED = BUTTLOADTAG\r
-\r
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then \r
-# doxygen's preprocessor will remove all function-like macros that are alone \r
-# on a line, have an all uppercase name, and do not end with a semicolon. Such \r
-# function macros are typically used for boiler-plate code, and will confuse \r
-# the parser if not removed.\r
-\r
-SKIP_FUNCTION_MACROS = YES\r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration::additions related to external references \r
-#---------------------------------------------------------------------------\r
-\r
-# The TAGFILES option can be used to specify one or more tagfiles. \r
-# Optionally an initial location of the external documentation \r
-# can be added for each tagfile. The format of a tag file without \r
-# this location is as follows: \r
-# TAGFILES = file1 file2 ... \r
-# Adding location for the tag files is done as follows: \r
-# TAGFILES = file1=loc1 "file2 = loc2" ... \r
-# where "loc1" and "loc2" can be relative or absolute paths or \r
-# URLs. If a location is present for each tag, the installdox tool \r
-# does not have to be run to correct the links.\r
-# Note that each tag file must have a unique name\r
-# (where the name does NOT include the path)\r
-# If a tag file is not located in the directory in which doxygen \r
-# is run, you must also specify the path to the tagfile here.\r
-\r
-TAGFILES = \r
-\r
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create \r
-# a tag file that is based on the input files it reads.\r
-\r
-GENERATE_TAGFILE = \r
-\r
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed \r
-# in the class index. If set to NO only the inherited external classes \r
-# will be listed.\r
-\r
-ALLEXTERNALS = NO\r
-\r
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed \r
-# in the modules index. If set to NO, only the current project's groups will \r
-# be listed.\r
-\r
-EXTERNAL_GROUPS = YES\r
-\r
-# The PERL_PATH should be the absolute path and name of the perl script \r
-# interpreter (i.e. the result of `which perl').\r
-\r
-PERL_PATH = /usr/bin/perl\r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration options related to the dot tool \r
-#---------------------------------------------------------------------------\r
-\r
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will \r
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base \r
-# or super classes. Setting the tag to NO turns the diagrams off. Note that \r
-# this option is superseded by the HAVE_DOT option below. This is only a \r
-# fallback. It is recommended to install and use dot, since it yields more \r
-# powerful graphs.\r
-\r
-CLASS_DIAGRAMS = NO\r
-\r
-# You can define message sequence charts within doxygen comments using the \msc \r
-# command. Doxygen will then run the mscgen tool (see \r
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the \r
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where \r
-# the mscgen tool resides. If left empty the tool is assumed to be found in the \r
-# default search path.\r
-\r
-MSCGEN_PATH = \r
-\r
-# If set to YES, the inheritance and collaboration graphs will hide \r
-# inheritance and usage relations if the target is undocumented \r
-# or is not a class.\r
-\r
-HIDE_UNDOC_RELATIONS = YES\r
-\r
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is \r
-# available from the path. This tool is part of Graphviz, a graph visualization \r
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section \r
-# have no effect if this option is set to NO (the default)\r
-\r
-HAVE_DOT = NO\r
-\r
-# By default doxygen will write a font called FreeSans.ttf to the output \r
-# directory and reference it in all dot files that doxygen generates. This \r
-# font does not include all possible unicode characters however, so when you need \r
-# these (or just want a differently looking font) you can specify the font name \r
-# using DOT_FONTNAME. You need need to make sure dot is able to find the font, \r
-# which can be done by putting it in a standard location or by setting the \r
-# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory \r
-# containing the font.\r
-\r
-DOT_FONTNAME = FreeSans\r
-\r
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. \r
-# The default size is 10pt.\r
-\r
-DOT_FONTSIZE = 10\r
-\r
-# By default doxygen will tell dot to use the output directory to look for the \r
-# FreeSans.ttf font (which doxygen will put there itself). If you specify a \r
-# different font using DOT_FONTNAME you can set the path where dot \r
-# can find it using this tag.\r
-\r
-DOT_FONTPATH = \r
-\r
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen \r
-# will generate a graph for each documented class showing the direct and \r
-# indirect inheritance relations. Setting this tag to YES will force the \r
-# the CLASS_DIAGRAMS tag to NO.\r
-\r
-CLASS_GRAPH = NO\r
-\r
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen \r
-# will generate a graph for each documented class showing the direct and \r
-# indirect implementation dependencies (inheritance, containment, and \r
-# class references variables) of the class with other documented classes.\r
-\r
-COLLABORATION_GRAPH = NO\r
-\r
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen \r
-# will generate a graph for groups, showing the direct groups dependencies\r
-\r
-GROUP_GRAPHS = NO\r
-\r
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and \r
-# collaboration diagrams in a style similar to the OMG's Unified Modeling \r
-# Language.\r
-\r
-UML_LOOK = NO\r
-\r
-# If set to YES, the inheritance and collaboration graphs will show the \r
-# relations between templates and their instances.\r
-\r
-TEMPLATE_RELATIONS = NO\r
-\r
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT \r
-# tags are set to YES then doxygen will generate a graph for each documented \r
-# file showing the direct and indirect include dependencies of the file with \r
-# other documented files.\r
-\r
-INCLUDE_GRAPH = NO\r
-\r
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and \r
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each \r
-# documented header file showing the documented files that directly or \r
-# indirectly include this file.\r
-\r
-INCLUDED_BY_GRAPH = NO\r
-\r
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then \r
-# doxygen will generate a call dependency graph for every global function \r
-# or class method. Note that enabling this option will significantly increase \r
-# the time of a run. So in most cases it will be better to enable call graphs \r
-# for selected functions only using the \callgraph command.\r
-\r
-CALL_GRAPH = NO\r
-\r
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then \r
-# doxygen will generate a caller dependency graph for every global function \r
-# or class method. Note that enabling this option will significantly increase \r
-# the time of a run. So in most cases it will be better to enable caller \r
-# graphs for selected functions only using the \callergraph command.\r
-\r
-CALLER_GRAPH = NO\r
-\r
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen \r
-# will graphical hierarchy of all classes instead of a textual one.\r
-\r
-GRAPHICAL_HIERARCHY = NO\r
-\r
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES \r
-# then doxygen will show the dependencies a directory has on other directories \r
-# in a graphical way. The dependency relations are determined by the #include\r
-# relations between the files in the directories.\r
-\r
-DIRECTORY_GRAPH = NO\r
-\r
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images \r
-# generated by dot. Possible values are png, jpg, or gif\r
-# If left blank png will be used.\r
-\r
-DOT_IMAGE_FORMAT = png\r
-\r
-# The tag DOT_PATH can be used to specify the path where the dot tool can be \r
-# found. If left blank, it is assumed the dot tool can be found in the path.\r
-\r
-DOT_PATH = \r
-\r
-# The DOTFILE_DIRS tag can be used to specify one or more directories that \r
-# contain dot files that are included in the documentation (see the \r
-# \dotfile command).\r
-\r
-DOTFILE_DIRS = \r
-\r
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of \r
-# nodes that will be shown in the graph. If the number of nodes in a graph \r
-# becomes larger than this value, doxygen will truncate the graph, which is \r
-# visualized by representing a node as a red box. Note that doxygen if the \r
-# number of direct children of the root node in a graph is already larger than \r
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note \r
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.\r
-\r
-DOT_GRAPH_MAX_NODES = 15\r
-\r
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the \r
-# graphs generated by dot. A depth value of 3 means that only nodes reachable \r
-# from the root by following a path via at most 3 edges will be shown. Nodes \r
-# that lay further from the root node will be omitted. Note that setting this \r
-# option to 1 or 2 may greatly reduce the computation time needed for large \r
-# code bases. Also note that the size of a graph can be further restricted by \r
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.\r
-\r
-MAX_DOT_GRAPH_DEPTH = 2\r
-\r
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent \r
-# background. This is disabled by default, because dot on Windows does not \r
-# seem to support this out of the box. Warning: Depending on the platform used, \r
-# enabling this option may lead to badly anti-aliased labels on the edges of \r
-# a graph (i.e. they become hard to read).\r
-\r
-DOT_TRANSPARENT = YES\r
-\r
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output \r
-# files in one run (i.e. multiple -o and -T options on the command line). This \r
-# makes dot run faster, but since only newer versions of dot (>1.8.10) \r
-# support this, this feature is disabled by default.\r
-\r
-DOT_MULTI_TARGETS = NO\r
-\r
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will \r
-# generate a legend page explaining the meaning of the various boxes and \r
-# arrows in the dot generated graphs.\r
-\r
-GENERATE_LEGEND = YES\r
-\r
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will \r
-# remove the intermediate dot files that are used to generate \r
-# the various graphs.\r
-\r
-DOT_CLEANUP = YES\r
-\r
-#---------------------------------------------------------------------------\r
-# Configuration::additions related to the search engine \r
-#---------------------------------------------------------------------------\r
-\r
-# The SEARCHENGINE tag specifies whether or not a search engine should be \r
-# used. If set to NO the values of all tags below this one will be ignored.\r
-\r
-SEARCHENGINE = NO\r
projects / pub / USBasp.git / commitdiff