* - Increased throughput in the USBtoSerial project now that data transmission is non-blocking (thanks to Joseph Lacerte)
* - Updated bootloader makefiles to remove dependency on the \c bc command line calculator tool
* - Updated AVRISP-MKII Clone Programmer project so that the SCK clock period is saved in EEPROM (thanks to Gerhard Wesser)
+ * - Changed all *_SendByte() function prototypes to accept a void pointer for the input buffer (thanks to Simon Küppers)
*
* <b>Fixed:</b>
* - Core:
}
}
-void Serial_SendData(const uint8_t* Buffer,
+void Serial_SendData(const void* Buffer,
uint16_t Length)
{
while (Length--)
- Serial_SendByte(*(Buffer++));
+ Serial_SendByte(*((uint8_t*)Buffer++));
}
void Serial_CreateStream(FILE* Stream)
* \code
* // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
* Serial_Init(9600, false);
- *
+ *
* // Send a string through the USART
* Serial_SendString("Test String\r\n");
*
* // Send a raw byte through the USART
* Serial_SendByte(0xDC);
- *
+ *
* // Receive a byte through the USART (or -1 if no data received)
* int16_t DataByte = Serial_ReceiveByte();
* \endcode
* \param[in] Buffer Pointer to a buffer containing the data to send.
* \param[in] Length Length of the data to send, in bytes.
*/
- void Serial_SendData(const uint8_t* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ void Serial_SendData(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Creates a standard character stream from the USART so that it can be used with all the regular functions
* in the avr-libc \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
* \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used.
*/
void Serial_CreateStream(FILE* Stream);
-
+
/** Identical to \ref Serial_CreateStream(), except that reads are blocking until the calling stream function terminates
* the transfer.
*
}
void Serial_SendData(USART_t* const USART,
- const uint8_t* Buffer,
+ const void* Buffer,
uint16_t Length)
{
while (Length--)
- Serial_SendByte(USART, *(Buffer++));
+ Serial_SendByte(USART, *((uint8_t*)Buffer++));
}
void Serial_CreateStream(FILE* Stream)
* \code
* // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
* Serial_Init(&USARTD0, 9600, false);
- *
+ *
* // Send a string through the USART
* Serial_TxString(&USARTD0, "Test String\r\n");
- *
+ *
* // Receive a byte through the USART
* uint8_t DataByte = Serial_RxByte(&USARTD0);
* \endcode
* \param[in] Length Length of the data to send, in bytes.
*/
void Serial_SendData(USART_t* const USART,
- const uint8_t* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Creates a standard character stream from the USART so that it can be used with all the regular functions
* in the avr-libc \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
* \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used.
*/
void Serial_CreateStream(FILE* Stream);
-
+
/** Identical to \ref Serial_CreateStream(), except that reads are blocking until the calling stream function terminates
* the transfer.
*
USART->BAUDCTRLB = (BaudValue >> 8);
USART->BAUDCTRLA = (BaudValue & 0xFF);
-
+
USART->CTRLC = (USART_CMODE_ASYNCHRONOUS_gc | USART_PMODE_DISABLED_gc | USART_CHSIZE_8BIT_gc);
USART->CTRLB = (USART_RXEN_bm | USART_TXEN_bm | (DoubleSpeed ? USART_CLK2X_bm : 0));
}
USART->CTRLB = 0;
USART->CTRLC = 0;
}
-
+
/** Indicates whether a character has been received through the USART.
*
* \param[in,out] USART Pointer to the base of the USART peripheral within the device.
if (USB_DeviceState == DEVICE_STATE_Unattached)
return;
}
-
+
CDCInterfaceInfo->State.LineEncoding.BaudRateBPS = Endpoint_Read_32_LE();
CDCInterfaceInfo->State.LineEncoding.CharFormat = Endpoint_Read_8();
CDCInterfaceInfo->State.LineEncoding.ParityType = Endpoint_Read_8();
#if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address);
-
+
if (Endpoint_IsINReady())
CDC_Device_Flush(CDCInterfaceInfo);
#endif
}
uint8_t CDC_Device_SendData(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const char* const Buffer,
+ const void* const Buffer,
const uint16_t Length)
{
if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
struct
{
uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */
-
+
USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
uint8_t CDC_Device_SendData(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const char* const Buffer,
+ const void* const Buffer,
const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** Sends a given null terminated string to the attached USB host, if connected. If a host is not connected when
void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
#endif
-
+
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Function Prototypes: */
if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
return AOA_ENUMERROR_InvalidConfigDescriptor;
-
+
if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
DCOMP_AOA_Host_NextAndroidAccessoryInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
return AOA_ENUMERROR_NoCompatibleInterfaceFound;
}
-
+
AOAInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
while (!(DataINEndpoint) || !(DataOUTEndpoint))
AOAInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
AOAInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
AOAInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
+
AOAInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
AOAInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
AOAInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
+
if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataINPipe, 1)))
return false;
-
+
if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataOUTPipe, 1)))
return false;
uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo)
{
uint8_t ErrorCode;
-
+
uint16_t AccessoryProtocol;
if ((ErrorCode = AOA_Host_GetAccessoryProtocol(&AccessoryProtocol)) != HOST_WAITERROR_Successful)
return ErrorCode;
};
Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest(NULL);
+ return USB_Host_SendControlRequest(NULL);
}
static uint8_t AOA_Host_GetAccessoryProtocol(uint16_t* const Protocol)
static uint8_t AOA_Host_SendPropertyString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
const uint8_t StringIndex)
-{
+{
const char* String = AOAInterfaceInfo->Config.PropertyStrings[StringIndex];
-
+
if (String == NULL)
String = "";
}
uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t* const Buffer,
+ const void* const Buffer,
const uint16_t Length)
{
if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
{
USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
-
+
char* PropertyStrings[AOA_STRING_TOTAL_STRINGS]; /**< Android Accessory property strings, sent to identify the accessory when the
* Android device is switched into Open Accessory mode. */
} Config; /**< Config data for the USB class interface within the device. All elements in this section
uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
uint16_t ConfigDescriptorSize,
void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
+
/** Starts Accessory Mode in the attached Android device. This function will validate the device's Android Open Accessory protocol
* version, send the configured property strings, and request a switch to Android Open Accessory mode.
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t* const Buffer,
+ const void* const Buffer,
const uint16_t Length);
/** Sends a given null-terminated string to the attached USB device, if connected. If a device is not connected when the
CDCInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
CDCInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
CDCInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
+
CDCInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
CDCInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
CDCInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
+
CDCInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize);
CDCInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress;
CDCInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT;
if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataINPipe, 1)))
return false;
-
+
if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataOUTPipe, 1)))
return false;
}
uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t* const Buffer,
+ const void* const Buffer,
const uint16_t Length)
{
if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t* const Buffer,
+ const void* const Buffer,
const uint16_t Length);
/** Sends a given null-terminated string to the attached USB device, if connected. If a device is not connected when the
void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
FILE* const Stream);
#endif
-
+
/** CDC class driver event for a control line state change on a CDC host interface. This event fires each time the device notifies
* the host of a control line state change (containing the virtual serial control line states, such as DCD) and may be hooked in the
* user program by declaring a handler function with the same name and parameters listed here. The new control line states
PRNTInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
PRNTInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
PRNTInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
+
PRNTInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
PRNTInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
PRNTInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
+
if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataINPipe, 1)))
return false;
-
+
if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
+ return false;
PRNTInterfaceInfo->State.InterfaceNumber = PrinterInterface->InterfaceNumber;
PRNTInterfaceInfo->State.AlternateSetting = PrinterInterface->AlternateSetting;
}
uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- void* Buffer,
+ const void* Buffer,
const uint16_t Length)
{
uint8_t ErrorCode;
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- void* Buffer,
+ const void* Buffer,
const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
SIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
SIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
SIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
+
SIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
SIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
SIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
+
SIInterfaceInfo->Config.EventsPipe.Size = le16_to_cpu(EventsEndpoint->EndpointSize);
SIInterfaceInfo->Config.EventsPipe.EndpointAddress = EventsEndpoint->EndpointAddress;
SIInterfaceInfo->Config.EventsPipe.Type = EP_TYPE_INTERRUPT;
if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataINPipe, 1)))
return false;
-
+
if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataOUTPipe, 1)))
return false;
if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.EventsPipe, 1)))
return false;
-
+
SIInterfaceInfo->State.InterfaceNumber = StillImageInterface->InterfaceNumber;
SIInterfaceInfo->State.IsActive = true;
}
uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- void* Buffer,
+ const void* Buffer,
const uint16_t Bytes)
{
uint8_t ErrorCode;
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- void* Buffer,
+ const void* Buffer,
const uint16_t Bytes) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** Receives arbitrary data from the attached device, for use in the data phase of PIMA commands which require data
# Make all possible bootloaders for all targets and configurations as set by the BootloaderTest build test
# and store them in a separate directory called "Bootloaders"
-make_bootloaders:
+bootloaders:
@echo "build_bootloaders:" > BuildMakefile
@printf "\t-mkdir Bootloaders 2>/dev/null\n\n" >> BuildMakefile
validate-release: check-documentation-placeholders validate-branch
-.PHONY: all upgrade-doxygen make_bootloaders check-documentation-placeholders validate-branch
\ No newline at end of file
+.PHONY: all upgrade-doxygen bootloaders check-documentation-placeholders validate-branch
projects / pub / USBasp.git / commitdiff