#include <LUFA/Common/Common.h>
+ #include "Config/AppConfig.h"
+
/* Function Prototypes: */
void BootloaderAPI_ErasePage(const uint32_t Address);
void BootloaderAPI_WritePage(const uint32_t Address);
#include "Descriptors.h"
#include "BootloaderAPI.h"
+ #include "Config/AppConfig.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
* </tr>
* <tr>
* <td>NO_BLOCK_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
* using the byte-level commands.</td>
* </tr>
* <tr>
* <td>NO_EEPROM_BYTE_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
* to be made using the block-level commands.</td>
* </tr>
* <tr>
* <td>NO_FLASH_BYTE_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
* to be made using the block-level commands.</td>
* </tr>
* <tr>
* <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>
* </tr>
* </table>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure LUFA's
+ * compile time options, as an alternative to the compile time
+ * constants supplied through a makefile.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+// #define NO_BLOCK_SUPPORT
+// #define NO_EEPROM_BYTE_SUPPORT
+// #define NO_FLASH_BYTE_SUPPORT
+// #define NO_LOCK_BYTE_WRITE_SUPPORT
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+ #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+ #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+ #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+ #define NO_DEVICE_REMOTE_WAKEUP
+ #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
#if defined(__AVR_AT90USB1287__)
#define AVR_SIGNATURE_1 0x1E
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
-
-#LUFA_OPTS += -D NO_BLOCK_SUPPORT
-#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <LUFA/Common/Common.h>
+ #include "Config/AppConfig.h"
+
/* Function Prototypes: */
void BootloaderAPI_ErasePage(const uint32_t Address);
void BootloaderAPI_WritePage(const uint32_t Address);
#include "Descriptors.h"
#include "BootloaderAPI.h"
+ #include "Config/AppConfig.h"
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
/* Macros: */
- /** Configuration define. Define this token to true to case the bootloader to reject all memory commands
- * until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this
- * can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are
- * allowed at any time.
- */
- #define SECURE_MODE false
-
/** Major bootloader version number. */
#define BOOTLOADER_VERSION_MINOR 2
* </tr>
* <tr>
* <td>SECURE_MODE</td>
- * <td>BootloaderDFU.h</td>
- * <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an
+ * <td>AppConfig.h</td>
+ * <td>If defined to \c true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an
* erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from
- * being dumped by unauthorized persons.</td>
+ * being dumped by unauthorized persons. When false, all memory operations are allowed at any time.</td>
* </tr>
* </table>
*/
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define SECURE_MODE false
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+ #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+ #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+ #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 32
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+ #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+ #define NO_DEVICE_REMOTE_WAKEUP
+ #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
/* Includes: */
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Descriptor type value for a DFU class functional descriptor. */
#define DTYPE_DFUFunctional 0x21
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+ #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+ #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+ #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+ #define NO_DEVICE_REMOTE_WAKEUP
+ #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
USB_Init();
/* Start the ADC conversion in free running mode */
- ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK);
+ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** ISR to handle the reloading of the data endpoint with the next sample. */
#include <avr/power.h>
#include <avr/interrupt.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Drivers/USB/USB.h>
#include "Descriptors.h"
+ #include "Config/AppConfig.h"
/* Macros: */
- /** ADC channel number for the microphone input. */
- #define MIC_IN_ADC_CHANNEL 2
-
- /** ADC channel MUX mask for the microphone input. */
- #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2
-
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define MIC_IN_ADC_CHANNEL 2
+
+ #define MICROPHONE_BIASED_TO_HALF_RAIL
+ #define USE_TEST_TONE
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <stdlib.h>
#include "Descriptors.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
* </tr>
* <tr>
* <td>AUDIO_OUT_STEREO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_MONO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_PORTC</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define AUDIO_OUT_STEREO
+// #define AUDIO_OUT_MONO
+// #define AUDIO_OUT_PORTC
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D AUDIO_OUT_STEREO
-#LUFA_OPTS += -D AUDIO_OUT_MONO
-#LUFA_OPTS += -D AUDIO_OUT_PORTC
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/USB/USB.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define GENERIC_REPORT_SIZE 8
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
#include <LUFA/Drivers/USB/USB.h>
+
+ #include "Config/AppConfig.h"
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
/** Size in bytes of the Generic HID reporting endpoint. */
#define GENERIC_EPSIZE 8
- /** Size in bytes of the Generic HID reports (including report ID byte). */
- #define GENERIC_REPORT_SIZE 8
-
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
#include <string.h>
#include "Descriptors.h"
-
- #include <LUFA/Version.h>
+ #include "Config/AppConfig.h"
+
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
* </tr>
* <tr>
* <td>GENERIC_REPORT_SIZE</td>
- * <td>Descriptors.h</td>
- * <td>This token defines the size of the device reports, both sent and received. The value must be an
- * integer ranging from 1 to 255.</td>
+ * <td>AppConfig.h</td>
+ * <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
+ * must be an integer ranging from 1 to 255.</td>
* </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define TOTAL_LUNS 1
+
+ #define DISK_READ_ONLY false
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
#define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3)
#include "../MassStorage.h"
#include "../Descriptors.h"
-
+ #include "Config/AppConfig.h"
+
#include <LUFA/Common/Common.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Dataflash.h>
*/
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+ /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
/* Function Prototypes: */
void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const uint32_t BlockAddress,
#include "../MassStorage.h"
#include "../Descriptors.h"
#include "DataflashManager.h"
-
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
* is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
#include "Lib/SCSI.h"
#include "Lib/DataflashManager.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
- /** Total number of logical drives within the device - must be non-zero. */
- #define TOTAL_LUNS 1
-
- /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
- #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
- /** Indicates if the disk is write protected or not. */
- #define DISK_READ_ONLY false
-
/* Function Prototypes: */
void SetupHardware(void);
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount.</td>
* </tr>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ * </tr>
* </table>
*/
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define TOTAL_LUNS 1
+
+ #define DISK_READ_ONLY false
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** HID class report descriptor. This is a special descriptor constructed with values from the
* USBIF HID class specification to describe the reports and capabilities of the HID device. This
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Keyboard HID reporting IN endpoint. */
#define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1)
#include "../MassStorageKeyboard.h"
#include "../Descriptors.h"
-
+ #include "Config/AppConfig.h"
+
#include <LUFA/Common/Common.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Dataflash.h>
/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+ /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
/* Function Prototypes: */
void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const uint32_t BlockAddress,
#include "../MassStorageKeyboard.h"
#include "../Descriptors.h"
#include "DataflashManager.h"
-
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
* is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
#include "Lib/SCSI.h"
#include "Lib/DataflashManager.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
- /** Total number of logical drives within the device - must be non-zero. */
- #define TOTAL_LUNS 1
-
- /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
- #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
- /** Indicates if the disk is write protected or not. */
- #define DISK_READ_ONLY false
-
/* Function Prototypes: */
void SetupHardware(void);
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount.</td>
* </tr>
- * </table>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ * </tr>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define CLIENT_IP_ADDRESS { 10, 0, 0, 1}
+ #define SERVER_IP_ADDRESS { 10, 0, 0, 2}
+
+ #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
+ #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
+
+ #define NO_DECODE_ETHERNET
+ #define NO_DECODE_ARP
+ #define NO_DECODE_IP
+ #define NO_DECODE_ICMP
+ #define NO_DECODE_TCP
+ #define NO_DECODE_UDP
+ #define NO_DECODE_DHCP
+
+#endif
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3)
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
#include "EthernetProtocols.h"
#include "ProtocolDecoders.h"
#include "ICMP.h"
#include "IP.h"
/* Macros: */
- /** Physical MAC address of the USB RNDIS network adapter. */
- #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
-
- /** Physical MAC address of the virtual server on the network. */
- #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
-
/** Physical MAC address of the network broadcast address. */
#define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
#include "EthernetProtocols.h"
#include "Ethernet.h"
#include "ProtocolDecoders.h"
+ #include "Config/AppConfig.h"
/* Macros: */
- /** Protocol IP address of the host (client) machine, once assigned by DHCP. */
- #define CLIENT_IP_ADDRESS { 10, 0, 0, 1}
-
- /** Protocol IP address of the virtual server machine. */
- #define SERVER_IP_ADDRESS { 10, 0, 0, 2}
-
/** Protocol IP address of the broadcast address. */
#define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF}
#include "EthernetProtocols.h"
#include "Ethernet.h"
+ #include "Config/AppConfig.h"
/* Function Prototypes: */
void DecodeEthernetFrameHeader(void* InDataStart);
#include "Lib/TCP.h"
#include "Lib/ARP.h"
#include "Lib/Webserver.h"
-
- #include <LUFA/Version.h>
+ #include "Config/AppConfig.h"
+
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/USB/USB.h>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>CLIENT_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address of the virtual server.</td>
+ * </tr>
+ * <tr>
+ * <td>ADAPTER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the virtual server on the network.</td>
+ * </tr>
+ * <tr>
* <td>NO_DECODE_ETHERNET</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ARP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_IP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ICMP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_TCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_UDP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_DHCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D NO_DECODE_ETHERNET
-LUFA_OPTS += -D NO_DECODE_ARP
-LUFA_OPTS += -D NO_DECODE_IP
-LUFA_OPTS += -D NO_DECODE_ICMP
-LUFA_OPTS += -D NO_DECODE_TCP
-LUFA_OPTS += -D NO_DECODE_UDP
-LUFA_OPTS += -D NO_DECODE_DHCP
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/USB/USB.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define TOTAL_LUNS 1
+
+ #define DISK_READ_ONLY false
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 1)
#include "../VirtualSerialMassStorage.h"
#include "../Descriptors.h"
+ #include "Config/AppConfig.h"
#include <LUFA/Common/Common.h>
#include <LUFA/Drivers/USB/USB.h>
*/
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
+ /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
+ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
+
/* Function Prototypes: */
void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
const uint32_t BlockAddress,
#include "../VirtualSerialMassStorage.h"
#include "../Descriptors.h"
#include "DataflashManager.h"
-
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
* is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
#include "Lib/SCSI.h"
#include "Lib/DataflashManager.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/USB/USB.h>
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
- /** Total number of logical drives within the device - must be non-zero. */
- #define TOTAL_LUNS 1
-
- /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
- #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
- /** Indicates if the disk is write protected or not. */
- #define DISK_READ_ONLY false
-
/* Function Prototypes: */
void SetupHardware(void);
void CheckJoystickMovement(void);
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
* this can be set to any positive non-zero amount.</td>
* </tr>
- * </table>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Configuration define, indicating if the disk should be write protected or not.</td>
+ * </tr>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** HID class report descriptor. This is a special descriptor constructed with values from the
* USBIF HID class specification to describe the reports and capabilities of the HID device. This
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
#include "Lib/SideshowCommands.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
\r
#include "Descriptors.h"\r
\r
- #include <LUFA/Version.h>\r
#include <LUFA/Drivers/USB/USB.h>\r
#include <LUFA/Drivers/Board/LEDs.h>\r
\r
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
USB_Init();
/* Start the ADC conversion in free running mode */
- ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK);
+ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
#include <avr/interrupt.h>
#include "Descriptors.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
/* Macros: */
- /** ADC channel number for the microphone input. */
- #define MIC_IN_ADC_CHANNEL 2
-
- /** ADC channel MUX mask for the microphone input. */
- #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2
-
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
* </tr>
* <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define MIC_IN_ADC_CHANNEL 2
+
+ #define MICROPHONE_BIASED_TO_HALF_RAIL
+ #define USE_TEST_TONE
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <avr/interrupt.h>
#include "Descriptors.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
* </tr>
* <tr>
* <td>AUDIO_OUT_STEREO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_MONO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
* </tr>
* <tr>
* <td>AUDIO_OUT_PORTC</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
* external DAC.</td>
* </tr>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define AUDIO_OUT_STEREO
+// #define AUDIO_OUT_MONO
+// #define AUDIO_OUT_PORTC
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
#define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D AUDIO_OUT_STEREO
-#LUFA_OPTS += -D AUDIO_OUT_MONO
-#LUFA_OPTS += -D AUDIO_OUT_PORTC
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define GENERIC_REPORT_SIZE 8
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
/** Size in bytes of the Generic HID reporting endpoint. */
#define GENERIC_EPSIZE 8
- /** Size in bytes of the Generic HID reports (including report ID byte). */
- #define GENERIC_REPORT_SIZE 8
-
/* Function Prototypes: */
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
#include <string.h>
#include "Descriptors.h"
-
- #include <LUFA/Version.h>
+ #include "Config/AppConfig.h"
+
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
* </tr>
* <tr>
* <td>GENERIC_REPORT_SIZE</td>
- * <td>Descriptors.h</td>
- * <td>This token defines the size of the device reports, both sent and received. The value must be an
- * integer ranging from 1 to 255.</td>
+ * <td>AppConfig.h</td>
+ * <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
+ * must be an integer ranging from 1 to 255.</td>
* </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define TOTAL_LUNS 1
+
+ #define DISK_READ_ONLY false
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
#define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3)
#include <LUFA/Common/Common.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Dataflash.h>
-
+
/* Preprocessor Checks: */
#if (DATAFLASH_PAGE_SIZE % 16)
#error Dataflash page size must be a multiple of 16 bytes.
*/
#define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
- /** Total number of Logical Units (drives) in the device. The total device capacity is shared equally between
- * each drive - this can be set to any positive non-zero amount.
- */
- #define TOTAL_LUNS 1
-
/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
#define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
#include "Lib/SCSI.h"
#include "Lib/DataflashManager.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Dataflash.h>
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
- /** Indicates if the disk is write protected or not. */
- #define DISK_READ_ONLY false
-
/* Global Variables: */
extern MS_CommandBlockWrapper_t CommandBlock;
extern MS_CommandStatusWrapper_t CommandStatus;
* </tr>
* <tr>
* <td>TOTAL_LUNS</td>
- * <td>MassStorage.h</td>
+ * <td>AppConfig.h</td>
* <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
* - this can be set to any positive non-zero amount.</td>
* </tr>
+ * <tr>
+ * <td>DISK_READ_ONLY</td>
+ * <td>AppConfig.h</td>
+ * <td>Indicates if the disk should be write protected or not.</td>
+ * </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <string.h>
#include "Descriptors.h"
-
- #include <LUFA/Version.h>
+
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define CLIENT_IP_ADDRESS { 10, 0, 0, 1}
+ #define SERVER_IP_ADDRESS { 10, 0, 0, 2}
+
+ #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
+ #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
+
+ #define NO_DECODE_ETHERNET
+ #define NO_DECODE_ARP
+ #define NO_DECODE_IP
+ #define NO_DECODE_ICMP
+ #define NO_DECODE_TCP
+ #define NO_DECODE_UDP
+ #define NO_DECODE_DHCP
+
+#endif
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the CDC device-to-host data IN endpoint. */
#define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1)
#include <avr/io.h>
#include <string.h>
+ #include "Config/AppConfig.h"
+
#include "EthernetProtocols.h"
#include "ProtocolDecoders.h"
#include "ICMP.h"
#include "IP.h"
/* Macros: */
- /** Physical MAC address of the USB RNDIS network adapter. */
- #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
-
- /** Physical MAC address of the virtual server on the network. */
- #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
-
/** Physical MAC address of the network broadcast address. */
#define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
#include "EthernetProtocols.h"
#include "Ethernet.h"
#include "ProtocolDecoders.h"
+ #include "Config/AppConfig.h"
/* Macros: */
- /** Protocol IP address of the host (client) machine, once assigned by DHCP. */
- #define CLIENT_IP_ADDRESS { 10, 0, 0, 1}
-
- /** Protocol IP address of the virtual server machine. */
- #define SERVER_IP_ADDRESS { 10, 0, 0, 2}
-
/** Protocol IP address of the broadcast address. */
#define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF}
#include "EthernetProtocols.h"
#include "Ethernet.h"
+ #include "Config/AppConfig.h"
/* Function Prototypes: */
void DecodeEthernetFrameHeader(void* InDataStart);
#include "Lib/TCP.h"
#include "Lib/ARP.h"
#include "Lib/Webserver.h"
-
- #include <LUFA/Version.h>
+ #include "Config/AppConfig.h"
+
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>CLIENT_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_IP_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the IP address of the virtual server.</td>
+ * </tr>
+ * <tr>
+ * <td>ADAPTER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
+ * </tr>
+ * <tr>
+ * <td>SERVER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>Configures the MAC address of the virtual server on the network.</td>
+ * </tr>
+ * <tr>
* <td>NO_DECODE_ETHERNET</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ARP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_IP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ICMP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_TCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_UDP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_DHCP</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D NO_DECODE_ETHERNET
-LUFA_OPTS += -D NO_DECODE_ARP
-LUFA_OPTS += -D NO_DECODE_IP
-LUFA_OPTS += -D NO_DECODE_ICMP
-LUFA_OPTS += -D NO_DECODE_TCP
-LUFA_OPTS += -D NO_DECODE_UDP
-LUFA_OPTS += -D NO_DECODE_DHCP
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <avr/interrupt.h>\r
#include <stdio.h>\r
\r
- #include <LUFA/Version.h>\r
#include <LUFA/Drivers/Misc/TerminalCodes.h>\r
#include <LUFA/Drivers/Peripheral/Serial.h>\r
#include <LUFA/Drivers/Board/LEDs.h>\r
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+ #define HOST_DEVICE_SETTLE_DELAY_MS 0
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D HOST_DEVICE_SETTLE_DELAY_MS=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
/* Create a stdio stream for the serial port for stdin and stdout */
Serial_CreateStream(NULL);
+
+ /* Start the ADC conversion in free running mode */
+ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/USB/USB.h>
+
+ #include "Config/AppConfig.h"
/* Macros: */
- /** ADC channel number for the microphone input. */
- #define MIC_IN_ADC_CHANNEL 2
-
- /** ADC channel MUX mask for the microphone input. */
- #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2
-
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define MIC_IN_ADC_CHANNEL 2
+
+ #define MICROPHONE_BIASED_TO_HALF_RAIL
+ #define USE_TEST_TONE
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+ #define USB_STREAM_TIMEOUT_MS 5000
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <ctype.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=5000
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
+++ /dev/null
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2012.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.lufa-lib.org\r
-*/\r
-\r
-/*\r
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * Bluetooth stack event callback handlers. This module handles the callback events that are\r
- * thrown from the Bluetooth stack in response to changes in the connection and channel\r
- * states.\r
- */\r
-\r
-#include "BluetoothEvents.h"\r
-\r
-/** Pointer to the opened Bluetooth ACL channel structure for RFCOMM, used to send and receive data between the\r
- * local and remote device once a RFCOMM channel has been opened.\r
- */\r
-Bluetooth_Channel_t* SerialChannel_ACL = NULL;\r
-\r
-/** Pointer to the opened RFCOMM logical channel between local and remote device, once a RFCOMM ACL channel has been\r
- * negotiated and a logical RFCOMM channel requested.\r
- */\r
-RFCOMM_Channel_t* SerialChannel_RFCOMM = NULL;\r
-\r
-/** Bluetooth stack callback event for when the Bluetooth stack has fully initialized using the attached\r
- * Bluetooth dongle.\r
- */\r
-void Bluetooth_StackInitialized(void)\r
-{\r
- printf_P(PSTR("Stack initialized with local address %02X:%02X:%02X:%02X:%02X:%02X.\r\n"),\r
- Bluetooth_State.LocalBDADDR[5], Bluetooth_State.LocalBDADDR[4], Bluetooth_State.LocalBDADDR[3],\r
- Bluetooth_State.LocalBDADDR[2], Bluetooth_State.LocalBDADDR[1], Bluetooth_State.LocalBDADDR[0]);\r
- \r
- /* Reinitialize the services placed on top of the Bluetooth stack ready for new connections */\r
- RFCOMM_Initialize();\r
-}\r
-\r
-/** Bluetooth stack callback event for a Bluetooth connection request. When this callback fires, the\r
- * user application must indicate if the connection is to be allowed or rejected.\r
- *\r
- * \param[in] RemoteAddress Bluetooth address of the remote device attempting the connection\r
- *\r
- * \return Boolean true to accept the connection, false to reject it\r
- */\r
-bool Bluetooth_ConnectionRequest(const uint8_t* RemoteAddress)\r
-{\r
- printf_P(PSTR("Connection Request from Device %02X:%02X:%02X:%02X:%02X:%02X.\r\n"),\r
- RemoteAddress[5], RemoteAddress[4], RemoteAddress[3], RemoteAddress[2],\r
- RemoteAddress[1], RemoteAddress[0]);\r
-\r
- /* Always accept connections from remote devices */\r
- return true;\r
-}\r
-\r
-/** Bluetooth stack callback event for a completed Bluetooth connection. When this callback is made,\r
- * the connection information can be accessed through the global \ref Bluetooth_Connection structure.\r
- */\r
-void Bluetooth_ConnectionComplete(void)\r
-{\r
- printf_P(PSTR("Connection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X.\r\n"), \r
- Bluetooth_Connection.RemoteAddress[5], Bluetooth_Connection.RemoteAddress[4],\r
- Bluetooth_Connection.RemoteAddress[3], Bluetooth_Connection.RemoteAddress[2],\r
- Bluetooth_Connection.RemoteAddress[1], Bluetooth_Connection.RemoteAddress[0]);\r
-\r
- LEDs_SetAllLEDs(LEDMASK_USB_BUSY);\r
-}\r
-\r
-/** Bluetooth stack callback event for a completed Bluetooth disconnection. When this callback is made,\r
- * the connection information in the global \ref Bluetooth_Connection structure is invalidated with the\r
- * exception of the RemoteAddress element, which can be used to determine the address of the device that\r
- * was disconnected.\r
- */\r
-void Bluetooth_DisconnectionComplete(void)\r
-{\r
- printf_P(PSTR("Disconnection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X.\r\n"), \r
- Bluetooth_Connection.RemoteAddress[5], Bluetooth_Connection.RemoteAddress[4],\r
- Bluetooth_Connection.RemoteAddress[3], Bluetooth_Connection.RemoteAddress[2],\r
- Bluetooth_Connection.RemoteAddress[1], Bluetooth_Connection.RemoteAddress[0]);\r
-\r
- LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
-}\r
-\r
-/** Bluetooth stack callback event for a Bluetooth ACL Channel connection request. When is callback fires,\r
- * the user application must indicate if the channel connection should be rejected or not, based on the \r
- * protocol (PSM) value of the requested channel.\r
- *\r
- * \param[in] PSM Protocol PSM value for the requested channel\r
- *\r
- * \return Boolean true to accept the channel connection request, false to reject it\r
- */\r
-bool Bluetooth_ChannelConnectionRequest(const uint16_t PSM)\r
-{\r
- /* Only accept connections for channels that will be used for RFCOMM or SDP data */\r
- return ((PSM == CHANNEL_PSM_RFCOMM) || (PSM == CHANNEL_PSM_SDP));\r
-}\r
-\r
-/** Bluetooth stack callback event for when a Bluetooth ACL channel has been fully created and configured,\r
- * either at the request of the local device, or the remote device.\r
- *\r
- * \param[in] ACLChannel Bluetooth ACL data channel information structure for the channel that can now be used\r
- */\r
-void Bluetooth_ChannelOpened(Bluetooth_Channel_t* const ACLChannel)\r
-{\r
- /* Save the RFCOMM channel for later use when we want to send RFCOMM data */\r
- if (ACLChannel->PSM == CHANNEL_PSM_RFCOMM)\r
- SerialChannel_ACL = ACLChannel;\r
-}\r
-\r
-/** Bluetooth stack callback event for a non-signal ACL packet reception. This callback fires once a connection\r
- * to a remote Bluetooth device has been made, and the remote device has sent a non-signaling ACL packet.\r
- *\r
- * \param[in] Data Pointer to a buffer where the received data is stored\r
- * \param[in] DataLen Length of the packet data, in bytes\r
- * \param[in] ACLChannel Bluetooth ACL data channel information structure for the packet's destination channel\r
- */\r
-void Bluetooth_PacketReceived(void* Data, uint16_t DataLen, Bluetooth_Channel_t* const ACLChannel)\r
-{\r
- /* Run the correct packet handler based on the received packet's PSM, which indicates the service being carried */\r
- switch (ACLChannel->PSM)\r
- {\r
- case CHANNEL_PSM_SDP:\r
- /* Service Discovery Protocol packet */\r
- SDP_ProcessPacket(Data, ACLChannel);\r
- break;\r
- case CHANNEL_PSM_RFCOMM:\r
- /* RFCOMM (Serial Port) Protocol packet */\r
- RFCOMM_ProcessPacket(Data, ACLChannel);\r
- break;\r
- }\r
-}\r
-\r
-/** RFCOMM layer callback for event for when a RFCOMM logical channel has been fully opened and configured between\r
- * the local and remote device. Once open, this RFCOMM channel can be read from and written to freely until is it\r
- * closed by either end.\r
- *\r
- * \param[in] RFCOMMChannel RFCOMM channel that was opened\r
- */ \r
-void RFCOMM_ChannelOpened(RFCOMM_Channel_t* const RFCOMMChannel)\r
-{\r
- /* Save the serial port RFCOMM logical channel for later use */\r
- SerialChannel_RFCOMM = RFCOMMChannel;\r
-}\r
-\r
-/** RFCOMM layer callback event for when a packet is received on an open RFCOMM channel.\r
- *\r
- * \param[in] ACLChannel RFCOMM ACL channel that the data was directed to\r
- * \param[in] DataLen Length of the received data, in bytes\r
- * \param[in] Data Pointer to a buffer where the received data is stored\r
- */\r
-void RFCOMM_DataReceived(RFCOMM_Channel_t* const ACLChannel, uint16_t DataLen, const uint8_t* Data)\r
-{\r
- /* Write the received bytes to the serial port */\r
- for (uint8_t i = 0; i < DataLen; i++)\r
- putchar(Data[i]);\r
- \r
- /* Echo the data back to the sending device */\r
- RFCOMM_SendData(DataLen, Data, SerialChannel_RFCOMM, SerialChannel_ACL);\r
-}\r
-\r
-/** RFCOMM layer callback event for when the remote device has updated the channel terminal control signals\r
- * for a particular RFCOMM channel.\r
- *\r
- * \param[in] RFCOMMChannel RFCOMM logical channel whose signals were altered\r
- */ \r
-void RFCOMM_ChannelSignalsReceived(RFCOMM_Channel_t* const RFCOMMChannel)\r
-{\r
- // Currently do nothing in response to the remote device sending new terminal control signals\r
-}\r
-
+++ /dev/null
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2012.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.lufa-lib.org\r
-*/\r
-\r
-/*\r
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * Header file for BluetoothEvents.c.\r
- */\r
-\r
-#ifndef _BLUETOOTH_EVENTS_H_\r
-#define _BLUETOOTH_EVENTS_H_\r
-\r
- /* Includes: */\r
- #include <avr/io.h>\r
- #include <stdio.h>\r
-\r
- #include "BluetoothHost.h"\r
- #include "Lib/BluetoothStack.h"\r
- #include "Lib/SDP.h"\r
- #include "Lib/RFCOMM.h"\r
-\r
- #include <LUFA/Drivers/Peripheral/Serial.h>\r
- #include <LUFA/Drivers/Board/LEDs.h>\r
- \r
- /* Macros: */\r
- /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */\r
- #define LEDMASK_USB_NOTREADY LEDS_LED1\r
-\r
- /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */\r
- #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)\r
-\r
- /** LED mask for the library LED driver, to indicate that the USB interface is ready. */\r
- #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)\r
-\r
- /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */\r
- #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)\r
-\r
- /** LED mask for the library LED driver, to indicate that the USB interface is busy. */\r
- #define LEDMASK_USB_BUSY LEDS_LED2\r
- \r
- /* External Variables: */\r
- extern Bluetooth_Channel_t* SerialChannel_ACL;\r
- extern RFCOMM_Channel_t* SerialChannel_RFCOMM;\r
- \r
-#endif\r
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the BluetoothHost demo. This file contains the main tasks of
- * the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "BluetoothHost.h"
-
-/** Bluetooth configuration structure. This structure configures the Bluetooth stack's user alterable settings. */
-Bluetooth_Device_t Bluetooth_DeviceConfiguration =
- {
- Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM),
- PINCode: "0000",
- Name: "LUFA Bluetooth Demo"
- };
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
- SetupHardware();
-
- puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE));
-
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- sei();
-
- for (;;)
- {
- RFCOMM_ServiceChannels(SerialChannel_ACL);
-
- Bluetooth_Stack_USBTask();
- USB_USBTask();
- }
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- Serial_Init(9600, false);
- LEDs_Init();
- USB_Init();
-
- /* Create a stdio stream for the serial port for stdin and stdout */
- Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- * starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- * stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- * enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
- puts_P(PSTR("Getting Device Data.\r\n"));
-
- uint8_t ErrorCode;
-
- /* Get and process the configuration descriptor data */
- if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)
- {
- if (ErrorCode == DevControlError)
- puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
- else
- puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
- printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- puts_P(PSTR("Getting Config Data.\r\n"));
-
- /* Get and process the configuration descriptor data */
- if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
- {
- if (ErrorCode == ControlError)
- puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
- else
- puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
- printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
- if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n"));
-
- /* Initialize the Bluetooth stack */
- Bluetooth_Stack_Init();
-
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
- USB_Disable();
-
- printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
- " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- * enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
- const uint8_t SubErrorCode)
-{
- printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
- " -- Error Code %d\r\n"
- " -- Sub Error Code %d\r\n"
- " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for BluetoothHost.c.
- */
-
-#ifndef _BLUETOOTH_HOST_H_
-#define _BLUETOOTH_HOST_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/wdt.h>
- #include <avr/pgmspace.h>
- #include <avr/power.h>
- #include <avr/interrupt.h>
- #include <stdio.h>
-
- #include "BluetoothEvents.h"
- #include "DeviceDescriptor.h"
- #include "ConfigDescriptor.h"
- #include "Lib/BluetoothStack.h"
-
- #include <LUFA/Version.h>
- #include <LUFA/Drivers/Misc/TerminalCodes.h>
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
- #include <LUFA/Drivers/Board/LEDs.h>
-
- /* Macros: */
- /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
- #define LEDMASK_USB_NOTREADY LEDS_LED1
-
- /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
- #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
- #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
-
- /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
- #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
-
- /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
- #define LEDMASK_USB_BUSY LEDS_LED2
-
- /* Event Handlers: */
- void EVENT_USB_Host_DeviceAttached(void);
- void EVENT_USB_Host_DeviceUnattached(void);
- void EVENT_USB_Host_DeviceEnumerationComplete(void);
- void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
- void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
- const uint8_t SubErrorCode);
-
- /* Function Prototypes: */
- void SetupHardware(void);
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- * needed to communication with an attached USB device. Descriptors are special computer-readable structures
- * which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- * with compatible devices.
- *
- * This routine searches for a BT interface descriptor containing bulk IN and OUT data endpoints.
- *
- * \return An error code from the \ref BluetoothHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
- uint8_t ConfigDescriptorData[512];
- void* CurrConfigLocation = ConfigDescriptorData;
- uint16_t CurrConfigBytesRem;
-
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Endpoint_t* EventsEndpoint = NULL;
-
- /* Retrieve the entire configuration descriptor into the allocated buffer */
- switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
- {
- case HOST_GETCONFIG_Successful:
- break;
- case HOST_GETCONFIG_InvalidData:
- return InvalidConfigDataReturned;
- case HOST_GETCONFIG_BuffOverflow:
- return DescriptorTooLarge;
- default:
- return DevControlError;
- }
-
- /* The Bluetooth USB transport addendum mandates that the data (not streaming voice) endpoints
- be in the first interface descriptor (interface 0) */
- USB_GetNextDescriptorOfType(&CurrConfigBytesRem, &CurrConfigLocation, DTYPE_Interface);
-
- /* Ensure that an interface was found, and the end of the descriptor was not reached */
- if (!(CurrConfigBytesRem))
- return NoCompatibleInterfaceFound;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint))
- {
- /* Get the next Bluetooth interface's data endpoint descriptor */
- if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- DComp_NextInterfaceBluetoothDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- /* Data endpoints not found within the first bluetooth device interface, error out */
- return NoCompatibleInterfaceFound;
- }
-
- /* Retrieve the endpoint address from the endpoint descriptor */
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
- /* If the endpoint is a IN type endpoint */
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- {
- /* Check if the found endpoint is a interrupt or bulk type descriptor */
- if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
- EventsEndpoint = EndpointData;
- else
- DataINEndpoint = EndpointData;
- }
- else
- {
- DataOUTEndpoint = EndpointData;
- }
- }
-
- /* Configure the Bluetooth data IN pipe */
- Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
- /* Configure the Bluetooth data OUT pipe */
- Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
- /* Configure the Bluetooth events pipe */
- Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1);
- Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS);
-
- /* Valid data found, return success */
- return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- * descriptor processing if an incompatible descriptor configuration is found.
- *
- * This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
- * search if another interface descriptor is found before the required endpoint.
- *
- * \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- /* Determine the type of the current descriptor */
- if (Header->Type == DTYPE_Endpoint)
- return DESCRIPTOR_SEARCH_Found;
- else if (Header->Type == DTYPE_Interface)
- return DESCRIPTOR_SEARCH_Fail;
- else
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
- /* Includes: */
- #include <LUFA/Drivers/USB/USB.h>
-
- /* Macros: */
- #define BLUETOOTH_DATA_IN_PIPE (PIPE_DIR_IN | 1)
- #define BLUETOOTH_DATA_OUT_PIPE (PIPE_DIR_OUT | 2)
- #define BLUETOOTH_EVENTS_PIPE (PIPE_DIR_IN | 3)
-
- /* Enums: */
- /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
- enum BluetoothHost_GetConfigDescriptorDataCodes_t
- {
- SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */
- DevControlError = 1, /**< A control request to the device failed to complete successfully */
- DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
- InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
- NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */
- };
-
- /* Function Prototypes: */
- uint8_t ProcessConfigurationDescriptor(void);
-
- uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special
- * computer-readable structures which the host requests upon device enumeration, to determine information about
- * the attached device.
- */
-
-#include "DeviceDescriptor.h"
-
-/** Reads and processes an attached device's Device Descriptor, to determine compatibility
- *
- * This routine checks to ensure that the attached device's class codes match those for Bluetooth devices.
- *
- * \return An error code from the \ref BluetoothHost_GetDeviceDescriptorDataCodes_t enum.
- */
-uint8_t ProcessDeviceDescriptor(void)
-{
- USB_Descriptor_Device_t DeviceDescriptor;
-
- /* Send the request to retrieve the device descriptor */
- if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)
- return DevControlError;
-
- /* Validate returned data - ensure the returned data is a device descriptor */
- if (DeviceDescriptor.Header.Type != DTYPE_Device)
- return InvalidDeviceDataReturned;
-
- /* Validate returned device Class, SubClass and Protocol values against the Bluetooth spec values */
- if ((DeviceDescriptor.Class != BLUETOOTH_DEVICE_CLASS) ||
- (DeviceDescriptor.SubClass != BLUETOOTH_DEVICE_SUBCLASS) ||
- (DeviceDescriptor.Protocol != BLUETOOTH_DEVICE_PROTOCOL))
- {
- return IncorrectBTDevice;
- }
-
- return SuccessfulDeviceRead;
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for DeviceDescriptor.c.
- */
-
-#ifndef _DEVICEDESCRIPTOR_H_
-#define _DEVICEDESCRIPTOR_H_
-
- /* Includes: */
- #include <LUFA/Drivers/USB/USB.h>
-
- #include "BluetoothHost.h"
-
- /* Macros: */
- /** Device Class value for the Bluetooth Device class. */
- #define BLUETOOTH_DEVICE_CLASS 0xE0
-
- /** Device Subclass value for the Bluetooth Device class. */
- #define BLUETOOTH_DEVICE_SUBCLASS 0x01
-
- /** Device Protocol value for the Bluetooth Device class. */
- #define BLUETOOTH_DEVICE_PROTOCOL 0x01
-
- /* Enums: */
- /** Enum for the possible return codes of the \ref ProcessDeviceDescriptor() function. */
- enum BluetoothHost_GetDeviceDescriptorDataCodes_t
- {
- SuccessfulDeviceRead = 0, /**< Device Descriptor was processed successfully */
- ControlError = 1, /**< A control request to the device failed to complete successfully */
- InvalidDeviceDataReturned = 2, /**< The device returned an invalid Device Descriptor */
- IncorrectBTDevice = 3, /**< The attached device is not a Bluetooth class device */
- };
-
- /* Function Prototypes: */
- uint8_t ProcessDeviceDescriptor(void);
-
-#endif
-
+++ /dev/null
-# Doxyfile 1.8.1
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING = UTF-8
-
-# The PROJECT_NAME tag is a single word (or sequence of words) that should
-# identify the project. Note that if you do not use Doxywizard you need
-# to put quotes around the project name if it contains spaces.
-
-PROJECT_NAME = "LUFA Library - Bluetooth Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer
-# a quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is
-# included in the documentation. The maximum height of the logo should not
-# exceed 55 pixels and the maximum width should not exceed 200 pixels.
-# Doxygen will copy the logo to the output directory.
-
-PROJECT_LOGO =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
-
-OUTPUT_LANGUAGE = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF = "The $name class" \
- "The $name widget" \
- "The $name file" \
- is \
- provides \
- specifies \
- contains \
- represents \
- a \
- an \
- the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful if your file system
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 4
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding
-# "class=itcl::class" will allow you to use the command class in the
-# itcl::class meaning.
-
-TCL_SUBST =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
-
-EXTENSION_MAPPING =
-
-# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
-# comments according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you
-# can mix doxygen, HTML, and XML commands with Markdown formatting.
-# Disable only in case of backward compatibilities issues.
-
-MARKDOWN_SUPPORT = NO
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also makes the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
-# unions are shown inside the group in which they are included (e.g. using
-# @ingroup) instead of on a separate page (for HTML and Man pages) or
-# section (for LaTeX and RTF).
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
-# unions with only public data fields will be shown inline in the documentation
-# of the scope in which they are defined (i.e. file, namespace, or group
-# documentation), provided this scope is documented. If set to NO (the default),
-# structs, classes, and unions are shown on a separate page (for HTML and Man
-# pages) or section (for LaTeX and RTF).
-
-INLINE_SIMPLE_STRUCTS = NO
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT = NO
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
-# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
-# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
-# their name and scope. Since this can be an expensive process and often the
-# same symbol appear multiple times in the code, doxygen keeps a cache of
-# pre-resolved symbols. If the cache is too small doxygen will become slower.
-# If the cache is too large, memory is wasted. The cache size is given by this
-# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-LOOKUP_CACHE_SIZE = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
-
-EXTRACT_PACKAGE = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespaces are hidden.
-
-EXTRACT_ANON_NSPACES = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = YES
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
-# will list include files with double quotes in the documentation
-# rather than with sharp brackets.
-
-FORCE_LOCAL_INCLUDES = NO
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
-# will sort the (brief and detailed) documentation of class members so that
-# constructors and destructors are listed first. If set to NO (the default)
-# the constructors will appear in the respective orders defined by
-# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
-# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
-# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
-# do proper type resolution of all parameters of a function it will reject a
-# match between the prototype and the implementation of a member function even
-# if there is only one candidate or it is obvious which candidate to choose
-# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
-# will still accept a match between prototype and implementation in such cases.
-
-STRICT_PROTO_MATCHING = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST = NO
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST = NO
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or macro consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and macros in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page.
-# This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option.
-# You can optionally specify a file name after the option, if omitted
-# DoxygenLayout.xml will be used as the name of the layout file.
-
-LAYOUT_FILE =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files
-# containing the references data. This must be a list of .bib files. The
-# .bib extension is automatically appended if omitted. Using this command
-# requires the bibtex tool to be installed. See also
-# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
-# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
-# feature you need bibtex and perl available in the search path.
-
-CITE_BIB_FILES =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR = YES
-
-# The WARN_NO_PARAMDOC option can be enabled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
-# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
-# *.f90 *.f *.for *.vhd *.vhdl
-
-FILE_PATTERNS = *.h \
- *.c \
- *.txt
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS = __* \
- INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.
-# Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.
-# The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty or if
-# non of the patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
-# and it is also possible to disable source filtering for a specific pattern
-# using *.ext= (so without naming a filter). This option only has effect when
-# FILTER_SOURCE_FILES is enabled.
-
-FILTER_SOURCE_PATTERNS =
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.
-# Otherwise they will link to the documentation.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header. Note that when using a custom header you are responsible
-# for the proper inclusion of any scripts and style sheets that doxygen
-# needs, which is dependent on the configuration options used.
-# It is advised to generate a default header using "doxygen -w html
-# header.html footer.html stylesheet.css YourConfigFile" and then modify
-# that header. Note that the header is subject to change so you typically
-# have to redo this when upgrading to a newer version of doxygen or when
-# changing the value of configuration settings such as GENERATE_TREEVIEW!
-
-HTML_HEADER =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# style sheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that
-# the files will be copied as-is; there are no commands or markers available.
-
-HTML_EXTRA_FILES =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the style sheet and background images
-# according to this color. Hue is specified as an angle on a colorwheel,
-# see http://en.wikipedia.org/wiki/Hue for more information.
-# For instance the value 0 represents red, 60 is yellow, 120 is green,
-# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
-# The allowed range is 0 to 359.
-
-HTML_COLORSTYLE_HUE = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
-# the colors in the HTML output. For a value of 0 the output will use
-# grayscales only. A value of 255 will produce the most vivid colors.
-
-HTML_COLORSTYLE_SAT = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
-# the luminance component of the colors in the HTML output. Values below
-# 100 gradually make the output lighter, whereas values above 100 make
-# the output darker. The value divided by 100 is the actual gamma applied,
-# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
-# and 100 does not change the gamma.
-
-HTML_COLORSTYLE_GAMMA = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting
-# this to NO can help when comparing the output of multiple runs.
-
-HTML_TIMESTAMP = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
-
-HTML_DYNAMIC_SECTIONS = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
-# entries shown in the various tree structured indices initially; the user
-# can expand and collapse entries dynamically later on. Doxygen will expand
-# the tree to such a level that at most the specified number of entries are
-# visible (unless a fully collapsed tree already exceeds this amount).
-# So setting the number of entries 1 will produce a full collapsed tree by
-# default. 0 is a special value representing an infinite number of entries
-# and will result in a full expanded tree by default.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-
-GENERATE_DOCSET = NO
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID = org.doxygen.Project
-
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-
-DOCSET_PUBLISHER_ID = org.doxygen.Publisher
-
-# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
-
-DOCSET_PUBLISHER_NAME = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
-# that can be used as input for Qt's qhelpgenerator to generate a
-# Qt Compressed Help (.qch) of the generated HTML documentation.
-
-GENERATE_QHP = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#namespace
-
-QHP_NAMESPACE = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#virtual-folders
-
-QHP_VIRTUAL_FOLDER = doc
-
-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
-# add. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#custom-filters
-
-QHP_CUST_FILTER_NAME =
-
-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
-# Qt Help Project / Custom Filters</a>.
-
-QHP_CUST_FILTER_ATTRS =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's
-# filter section matches.
-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
-# Qt Help Project / Filter Attributes</a>.
-
-QHP_SECT_FILTER_ATTRS =
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file.
-
-QHG_LOCATION =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
-# will be generated, which together with the HTML files, form an Eclipse help
-# plugin. To install this plugin and make it available under the help contents
-# menu in Eclipse, the contents of the directory containing the HTML and XML
-# files needs to be copied into the plugins directory of eclipse. The name of
-# the directory within the plugins directory should be the same as
-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
-# the help appears.
-
-GENERATE_ECLIPSEHELP = NO
-
-# A unique identifier for the eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have
-# this name.
-
-ECLIPSE_DOC_ID = org.doxygen.Project
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
-# at top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it. Since the tabs have the same information as the
-# navigation tree you can set this option to NO if you already set
-# GENERATE_TREEVIEW to YES.
-
-DISABLE_INDEX = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to YES, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
-# Windows users are probably better off using the HTML help feature.
-# Since the tree basically has the same information as the tab index you
-# could consider to set DISABLE_INDEX to NO when enabling this option.
-
-GENERATE_TREEVIEW = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
-# (range [0,1..20]) that doxygen will group on one line in the generated HTML
-# documentation. Note that a value of 0 will completely suppress the enum
-# values from appearing in the overview section.
-
-ENUM_VALUES_PER_LINE = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
-# links to external symbols imported via tag files in a separate window.
-
-EXT_LINKS_IN_WINDOW = NO
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are
-# not supported properly for IE 6.0, but are supported on all modern browsers.
-# Note that when changing this option you need to delete any form_*.png files
-# in the HTML output before the changes have effect.
-
-FORMULA_TRANSPARENT = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
-# (see http://www.mathjax.org) which uses client side Javascript for the
-# rendering instead of using prerendered bitmaps. Use this if you do not
-# have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you may also need to install MathJax separately and
-# configure the path to it using the MATHJAX_RELPATH option.
-
-USE_MATHJAX = NO
-
-# When MathJax is enabled you need to specify the location relative to the
-# HTML output directory using the MATHJAX_RELPATH option. The destination
-# directory should contain the MathJax.js script. For instance, if the mathjax
-# directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to
-# the MathJax Content Delivery Network so you can quickly see the result without
-# installing MathJax.
-# However, it is strongly recommended to install a local
-# copy of MathJax from http://www.mathjax.org before deployment.
-
-MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
-# names that should be enabled during MathJax rendering.
-
-MATHJAX_EXTENSIONS =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box
-# for the HTML output. The underlying search engine uses javascript
-# and DHTML and should work on any modern browser. Note that when using
-# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
-# (GENERATE_DOCSET) there is already a search function so this one should
-# typically be disabled. For large projects the javascript based search engine
-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
-
-SEARCHENGINE = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a PHP enabled web server instead of at the web client
-# using Javascript. Doxygen will generate the search PHP script and index
-# file to put on the web server. The advantage of the server
-# based approach is that it scales better to large projects and allows
-# full text search. The disadvantages are that it is more difficult to setup
-# and does not have live searching capabilities.
-
-SERVER_BASED_SEARCH = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
-# the generated latex document. The footer should contain everything after
-# the last chapter. If it is left blank doxygen will generate a
-# standard footer. Notice: only use this tag if you know what you are doing!
-
-LATEX_FOOTER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = NO
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
-# http://en.wikipedia.org/wiki/BibTeX for more info.
-
-LATEX_BIB_STYLE = plain
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
-
-# Load style sheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.
-# This is useful
-# if you want to understand what is going on.
-# On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# pointed to by INCLUDE_PATH will be searched when a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED = __DOXYGEN__ \
- PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition that
-# overrules the definition found in the source code.
-
-EXPAND_AS_DEFINED =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all references to function-like macros
-# that are alone on a line, have an all uppercase name, and do not end with a
-# semicolon, because these will confuse the parser if not removed.
-
-SKIP_FUNCTION_MACROS = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles. For each
-# tag file the location of the external documentation should be added. The
-# format of a tag file without this location is as follows:
-#
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths
-# or URLs. Note that each tag file must have a unique name (where the name does
-# NOT include the path). If a tag file is not located in the directory in which
-# doxygen is run, you must also specify the path to the tagfile here.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option also works with HAVE_DOT disabled, but it is recommended to
-# install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
-# allowed to run in parallel. When set to 0 (the default) doxygen will
-# base this on the number of processors available in the system. You can set it
-# explicitly to a value larger than 0 to get control over the balance
-# between CPU load and processing speed.
-
-DOT_NUM_THREADS = 0
-
-# By default doxygen will use the Helvetica font for all dot files that
-# doxygen generates. When you want a differently looking font you can specify
-# the font name using DOT_FONTNAME. You need to make sure dot is able to find
-# the font, which can be done by putting it in a standard location or by setting
-# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
-# directory containing the font.
-
-DOT_FONTNAME = FreeSans
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE = 10
-
-# By default doxygen will tell dot to use the Helvetica font.
-# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
-# set the path where dot can find it.
-
-DOT_FONTPATH =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH = NO
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside
-# the class node. If there are many fields or methods and many nodes the
-# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
-# threshold limits the number of items for each type to make the size more
-# managable. Set this to 0 for no limit. Note that the threshold may be
-# exceeded by 50% before the limit is enforced.
-
-UML_LIMIT_NUM_FIELDS = 10
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH = NO
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will generate a graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = NO
-
-# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are svg, png, jpg, or gif.
-# If left blank png will be used. If you choose svg you need to set
-# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
-# visible in IE 9+ (other browsers do not have this requirement).
-
-DOT_IMAGE_FORMAT = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-# Note that this requires a modern browser other than Internet Explorer.
-# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
-# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
-# visible. Older versions of IE do not have SVG support.
-
-INTERACTIVE_SVG = NO
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the
-# \mscfile command).
-
-MSCFILE_DIRS =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP = YES
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Bluetooth L2CAP layer management code. This module managed the creation,
- * configuration and teardown of L2CAP channels, and manages packet reception
- * and sending to and from other Bluetooth devices.
- */
-
-/*
- TODO: Make SendPacket respect receiver's MTU
- TODO: Make ReceivePacket stitch together MTU fragments (?)
- */
-
-#define INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C
-#include "BluetoothACLPackets.h"
-
-/** Bluetooth ACL processing task. This task should be called repeatedly the main Bluetooth
- * stack task to manage the ACL processing state.
- */
-void Bluetooth_ACLTask(void)
-{
- /* Process incoming ACL packets, if any */
- Bluetooth_ProcessIncomingACLPackets();
-
- /* Check for any half-open channels, send configuration details to the remote device if found */
- for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++)
- {
- Bluetooth_Channel_t* ChannelData = &Bluetooth_Connection.Channels[i];
-
- bool MustSendConfigReq = true;
-
- /* Check if we are in a channel state which requires a configuration request to be sent */
- switch (ChannelData->State)
- {
- case BT_Channel_Config_WaitConfig:
- ChannelData->State = BT_Channel_Config_WaitReqResp;
- break;
- case BT_Channel_Config_WaitSendConfig:
- ChannelData->State = BT_Channel_Config_WaitResp;
- break;
- default:
- MustSendConfigReq = false;
- break;
- }
-
- /* Only send a configuration request if it the channel was in a state which required it */
- if (MustSendConfigReq)
- {
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_ConfigurationReq_t ConfigurationRequest;
-
- struct
- {
- BT_Config_Option_Header_t Header;
- uint16_t Value;
- } Option_LocalMTU;
- } PacketData;
-
- /* Fill out the Signal Command header in the response packet */
- PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_REQUEST;
- PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier;
- PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConfigurationRequest) +
- sizeof(PacketData.Option_LocalMTU);
-
- /* Fill out the Configuration Request in the response packet, including local MTU information */
- PacketData.ConfigurationRequest.DestinationChannel = ChannelData->RemoteNumber;
- PacketData.ConfigurationRequest.Flags = 0;
- PacketData.Option_LocalMTU.Header.Type = BT_CONFIG_OPTION_MTU;
- PacketData.Option_LocalMTU.Header.Length = sizeof(PacketData.Option_LocalMTU.Value);
- PacketData.Option_LocalMTU.Value = ChannelData->LocalMTU;
-
- Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL);
-
- BT_ACL_DEBUG(1, ">> L2CAP Configuration Request");
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.ConfigurationRequest.DestinationChannel);
- }
- }
-}
-
-/** Incoming ACL packet processing task. This task is called by the main ACL processing task to read in and process
- * any incoming ACL packets to the device, handling signal requests as they are received or passing along channel
- * data to the user application.
- */
-static void Bluetooth_ProcessIncomingACLPackets(void)
-{
- BT_ACL_Header_t ACLPacketHeader;
- BT_DataPacket_Header_t DataHeader;
-
- Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_Freeze();
- return;
- }
-
- /* Read in the received ACL packet headers when it has been discovered that a packet has been received */
- Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader), NULL);
- Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader), NULL);
-
- BT_ACL_DEBUG(2, "");
- BT_ACL_DEBUG(2, "Packet Received");
- BT_ACL_DEBUG(2, "-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF));
- BT_ACL_DEBUG(2, "-- Data Length: 0x%04X", ACLPacketHeader.DataLength);
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DataHeader.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Payload Length: 0x%04X", DataHeader.PayloadLength);
-
- /* Check the packet's destination channel - signaling channel should be processed by the stack internally */
- if (DataHeader.DestinationChannel == BT_CHANNEL_SIGNALING)
- {
- /* Read in the Signal Command header of the incoming packet */
- BT_Signal_Header_t SignalCommandHeader;
- Pipe_Read_Stream_LE(&SignalCommandHeader, sizeof(SignalCommandHeader), NULL);
-
- /* Dispatch to the appropriate handler function based on the Signal message code */
- switch (SignalCommandHeader.Code)
- {
- case BT_SIGNAL_CONNECTION_REQUEST:
- Bluetooth_Signal_ConnectionReq(&SignalCommandHeader);
- break;
- case BT_SIGNAL_CONNECTION_RESPONSE:
- Bluetooth_Signal_ConnectionResp(&SignalCommandHeader);
- break;
- case BT_SIGNAL_CONFIGURATION_REQUEST:
- Bluetooth_Signal_ConfigurationReq(&SignalCommandHeader);
- break;
- case BT_SIGNAL_CONFIGURATION_RESPONSE:
- Bluetooth_Signal_ConfigurationResp(&SignalCommandHeader);
- break;
- case BT_SIGNAL_DISCONNECTION_REQUEST:
- Bluetooth_Signal_DisconnectionReq(&SignalCommandHeader);
- break;
- case BT_SIGNAL_DISCONNECTION_RESPONSE:
- Bluetooth_Signal_DisconnectionResp(&SignalCommandHeader);
- break;
- case BT_SIGNAL_ECHO_REQUEST:
- Bluetooth_Signal_EchoReq(&SignalCommandHeader);
- break;
- case BT_SIGNAL_INFORMATION_REQUEST:
- Bluetooth_Signal_InformationReq(&SignalCommandHeader);
- break;
- case BT_SIGNAL_COMMAND_REJECT:
- BT_ACL_DEBUG(1, "<< Command Reject");
-
- uint16_t RejectReason;
- Pipe_Read_Stream_LE(&RejectReason, sizeof(RejectReason), NULL);
- Pipe_Discard_Stream(ACLPacketHeader.DataLength - sizeof(RejectReason), NULL);
- Pipe_ClearIN();
- Pipe_Freeze();
-
- BT_ACL_DEBUG(2, "-- Reason: %d", RejectReason);
- break;
- default:
- BT_ACL_DEBUG(1, "<< Unknown Signaling Command 0x%02X", SignalCommandHeader.Code);
-
- Pipe_Discard_Stream(ACLPacketHeader.DataLength, NULL);
- Pipe_ClearIN();
- Pipe_Freeze();
- break;
- }
- }
- else
- {
- /* Non-signaling packet received, read in the packet contents and pass to the user application */
- uint8_t PacketData[DataHeader.PayloadLength];
- Pipe_Read_Stream_LE(PacketData, DataHeader.PayloadLength, NULL);
- Pipe_ClearIN();
- Pipe_Freeze();
-
- Bluetooth_PacketReceived(PacketData, DataHeader.PayloadLength,
- Bluetooth_GetChannelData(DataHeader.DestinationChannel, CHANNEL_SEARCH_LOCALNUMBER));
- }
-}
-
-/** Retrieves the channel information structure with the given local or remote channel number from the channel list.
- *
- * \param[in] SearchValue Value to search for in the channel structure list
- * \param[in] SearchKey Key to search within the channel structure, a \c CHANNEL_SEARCH_* mask
- *
- * \return Pointer to the matching channel information structure in the channel table if found, NULL otherwise
- */
-Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue,
- const uint8_t SearchKey)
-{
- for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++)
- {
- Bluetooth_Channel_t* ChannelData = &Bluetooth_Connection.Channels[i];
-
- /* Closed channels should be ignored as they are not considered valid data */
- if (ChannelData->State == BT_Channel_Closed)
- continue;
-
- bool FoundMatch = false;
-
- /* Search the current channel for the search key to see if it matches */
- switch (SearchKey)
- {
- case CHANNEL_SEARCH_LOCALNUMBER:
- FoundMatch = (SearchValue == ChannelData->LocalNumber);
- break;
- case CHANNEL_SEARCH_REMOTENUMBER:
- FoundMatch = (SearchValue == ChannelData->RemoteNumber);
- break;
- case CHANNEL_SEARCH_PSM:
- FoundMatch = (SearchValue == ChannelData->PSM);
- break;
- }
-
- if (FoundMatch)
- return ChannelData;
- }
-
- return NULL;
-}
-
-/** Sends a packet to the remote device on the specified channel.
- *
- * \param[in] Data Pointer to a buffer where the data is to be sourced from
- * \param[in] DataLen Length of the data to send
- * \param[in] ACLChannel ACL channel information structure containing the destination channel's information, NULL
- * to send to the remote device's signaling channel
- *
- * \return A value from the \ref BT_SendPacket_ErrorCodes_t enum
- */
-uint8_t Bluetooth_SendPacket(void* Data,
- const uint16_t DataLen,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_ACL_Header_t ACLPacketHeader;
- BT_DataPacket_Header_t DataHeader;
-
- /* A remote device must be connected before a packet transmission is attempted */
- if (!(Bluetooth_Connection.IsConnected))
- return BT_SENDPACKET_NotConnected;
-
- /* If the destination channel is not the signaling channel and it is not currently fully open, abort */
- if ((ACLChannel != NULL) && (ACLChannel->State != BT_Channel_Open))
- return BT_SENDPACKET_ChannelNotOpen;
-
- /* Fill out the packet's header from the remote device connection information structure */
- ACLPacketHeader.ConnectionHandle = (Bluetooth_Connection.ConnectionHandle | BT_ACL_FIRST_AUTOFLUSH);
- ACLPacketHeader.DataLength = sizeof(DataHeader) + DataLen;
- DataHeader.PayloadLength = DataLen;
- DataHeader.DestinationChannel = (ACLChannel == NULL) ? BT_CHANNEL_SIGNALING : ACLChannel->RemoteNumber;
-
- Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE);
-
- Pipe_WaitUntilReady();
- Pipe_Unfreeze();
-
- /* Write the packet contents to the pipe so that it can be sent to the remote device */
- Pipe_Write_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader), NULL);
- Pipe_Write_Stream_LE(&DataHeader, sizeof(DataHeader), NULL);
- Pipe_Write_Stream_LE(Data, DataLen, NULL);
- Pipe_ClearOUT();
-
- Pipe_Freeze();
-
- BT_ACL_DEBUG(2, "");
- BT_ACL_DEBUG(2, "Packet Sent");
- BT_ACL_DEBUG(2, "-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF));
- BT_ACL_DEBUG(2, "-- Data Length: 0x%04X", ACLPacketHeader.DataLength);
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DataHeader.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Payload Length: 0x%04X", DataHeader.PayloadLength);
-
- return BT_SENDPACKET_NoError;
-}
-
-/** Opens a Bluetooth channel to the currently connected remote device, so that data can be exchanged.
- *
- * \note The channel is not immediately opened when this function returns - it must undergo a two way
- * connection and configuration process first as the main Bluetooth stack processing task is
- * repeatedly called. The returned channel is unusable by the user application until its State
- * element has progressed to the Open state.
- *
- * \param[in] PSM PSM of the service that the channel is to be opened for
- *
- * \return Pointer to the channel information structure of the opened channel, or NULL if no free channels
- */
-Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM)
-{
- Bluetooth_Channel_t* ChannelData = NULL;
-
- /* Search through the channel information list for a free channel item */
- for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++)
- {
- if (Bluetooth_Connection.Channels[i].State == BT_Channel_Closed)
- {
- ChannelData = &Bluetooth_Connection.Channels[i];
-
- /* Set the new channel structure's local channel number to a unique value within the connection orientated
- channel address space */
- ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i);
- break;
- }
- }
-
- /* If no free channel item was found in the list, all channels are occupied - abort */
- if (ChannelData == NULL)
- return NULL;
-
- /* Reset and fill out the allocated channel's information structure with defaults */
- ChannelData->RemoteNumber = 0;
- ChannelData->PSM = PSM;
- ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU;
- ChannelData->State = BT_Channel_WaitConnectRsp;
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_ConnectionReq_t ConnectionRequest;
- } PacketData;
-
- /* Fill out the Signal Command header in the response packet */
- PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_REQUEST;
- PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier;
- PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConnectionRequest);
-
- /* Fill out the Connection Request in the response packet */
- PacketData.ConnectionRequest.PSM = PSM;
- PacketData.ConnectionRequest.SourceChannel = ChannelData->LocalNumber;
-
- Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL);
-
- BT_ACL_DEBUG(1, ">> L2CAP Connection Request");
- BT_ACL_DEBUG(2, "-- PSM 0x%04X", PacketData.ConnectionRequest.PSM);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.ConnectionRequest.SourceChannel);
-
- return ChannelData;
-}
-
-/** Closes a Bluetooth channel that is open to the currently connected remote device, so that no further data
- * can be exchanged.
- *
- * \note The channel is not immediately closed when this function returns - it must undergo an asynchronous
- * disconnection process first as the main Bluetooth stack processing task is repeatedly called. The
- * returned channel is unusable by the user application upon return however the channel is not completely
- * closed until its State element has progressed to the Closed state.
- *
- * \param[in,out] ACLChannel ACL channel information structure of the channel to close
- */
-void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel)
-{
- /* Don't try to close a non-existing or already closed channel */
- if ((ACLChannel == NULL) || (ACLChannel->State == BT_Channel_Closed))
- return;
-
- /* Set the channel's state to the start of the teardown process */
- ACLChannel->State = BT_Channel_WaitDisconnect;
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_DisconnectionReq_t DisconnectionRequest;
- } PacketData;
-
- /* Fill out the Signal Command header in the response packet */
- PacketData.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_REQUEST;
- PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier;
- PacketData.SignalCommandHeader.Length = sizeof(PacketData.DisconnectionRequest);
-
- /* Fill out the Disconnection Request in the response packet */
- PacketData.DisconnectionRequest.DestinationChannel = ACLChannel->RemoteNumber;
- PacketData.DisconnectionRequest.SourceChannel = ACLChannel->LocalNumber;
-
- Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL);
-
- BT_ACL_DEBUG(1, ">> L2CAP Disconnection Request");
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.DisconnectionRequest.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.DisconnectionRequest.SourceChannel);
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for a Connection Request command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_ConnectionReq_t ConnectionRequest;
-
- Pipe_Read_Stream_LE(&ConnectionRequest, sizeof(ConnectionRequest), NULL);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- BT_ACL_DEBUG(1, "<< L2CAP Connection Request");
- BT_ACL_DEBUG(2, "-- PSM: 0x%04X", ConnectionRequest.PSM);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionRequest.SourceChannel);
-
- /* Try to retrieve the existing channel's information structure if it exists */
- Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionRequest.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER);
-
- /* If an existing channel item with the correct remote channel number was not found, find a free channel entry */
- if (ChannelData == NULL)
- {
- /* Look through the channel information list for a free entry */
- for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++)
- {
- if (Bluetooth_Connection.Channels[i].State == BT_Channel_Closed)
- {
- ChannelData = &Bluetooth_Connection.Channels[i];
-
- /* Set the new channel structure's local channel number to a unique value within the connection orientated
- channel address space */
- ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i);
- break;
- }
- }
- }
-
- uint8_t ChannelStatus = BT_CONNECTION_REFUSED_RESOURCES;
-
- /* Reset the channel item contents only if a channel entry was found for it */
- if (ChannelData != NULL)
- {
- /* Check if the user application will allow the connection based on its PSM */
- if (Bluetooth_ChannelConnectionRequest(ConnectionRequest.PSM))
- {
- ChannelData->RemoteNumber = ConnectionRequest.SourceChannel;
- ChannelData->PSM = ConnectionRequest.PSM;
- ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU;
- ChannelData->State = BT_Channel_Config_WaitConfig;
-
- ChannelStatus = BT_CONNECTION_SUCCESSFUL;
- }
- else
- {
- ChannelStatus = BT_CONNECTION_REFUSED_PSM;
- }
- }
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_ConnectionResp_t ConnectionResponse;
- } ResponsePacket;
-
- /* Fill out the Signal Command header in the response packet */
- ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_RESPONSE;
- ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier;
- ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.ConnectionResponse);
-
- /* Fill out the Connection Response in the response packet */
- ResponsePacket.ConnectionResponse.DestinationChannel = (ChannelData != NULL) ? ChannelData->LocalNumber : 0;
- ResponsePacket.ConnectionResponse.SourceChannel = (ChannelData != NULL) ? ChannelData->RemoteNumber : 0;
- ResponsePacket.ConnectionResponse.Result = ChannelStatus;
- ResponsePacket.ConnectionResponse.Status = 0x00;
-
- Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL);
-
- BT_ACL_DEBUG(1, ">> L2CAP Connection Response");
- BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.ConnectionResponse.Result);
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ResponsePacket.ConnectionResponse.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.ConnectionResponse.SourceChannel);
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for a Connection Response command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_ConnectionResp_t ConnectionResponse;
-
- Pipe_Read_Stream_LE(&ConnectionResponse, sizeof(ConnectionResponse), NULL);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- BT_ACL_DEBUG(1, "<< L2CAP Connection Response");
- BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConnectionResponse.Result);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel);
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel);
-
- /* Search for the referenced channel in the channel information list */
- Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionResponse.SourceChannel, CHANNEL_SEARCH_LOCALNUMBER);
-
- /* Only progress if the referenced channel data was found */
- if (ChannelData != NULL)
- {
- /* Set the channel structure's remote channel number to the channel allocated on the remote device */
- ChannelData->RemoteNumber = ConnectionResponse.SourceChannel;
- ChannelData->State = (ConnectionResponse.Result == BT_CONNECTION_SUCCESSFUL) ?
- BT_Channel_Config_WaitConfig : BT_Channel_Closed;
- }
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for a Configuration Request command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_ConfigurationReq_t ConfigurationRequest;
-
- /* Allocate a buffer large enough to hold the variable number of configuration options in the request */
- uint8_t OptionsLen = (SignalCommandHeader->Length - sizeof(ConfigurationRequest));
- uint8_t Options[OptionsLen];
-
- Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest), NULL);
- Pipe_Read_Stream_LE(&Options, sizeof(Options), NULL);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- /* Search for the referenced channel in the channel information list */
- Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationRequest.DestinationChannel, CHANNEL_SEARCH_LOCALNUMBER);
-
- BT_ACL_DEBUG(1, "<< L2CAP Configuration Request");
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Options Len: 0x%04X", OptionsLen);
-
- /* Only look at the channel configuration options if a valid channel entry for the local channel number was found */
- if (ChannelData != NULL)
- {
- /* Iterate through each option in the configuration request to look for ones which can be processed */
- uint8_t OptionPos = 0;
- while (OptionPos < OptionsLen)
- {
- BT_Config_Option_Header_t* OptionHeader = (BT_Config_Option_Header_t*)&Options[OptionPos];
- void* OptionData = &Options[OptionPos + sizeof(BT_Config_Option_Header_t)];
-
- BT_ACL_DEBUG(2, "-- Option Type: 0x%04X", OptionHeader->Type);
- BT_ACL_DEBUG(2, "-- Option Length: 0x%04X", (sizeof(BT_Config_Option_Header_t) + OptionHeader->Length));
-
- /* Store the remote MTU option's value if present */
- if (OptionHeader->Type == BT_CONFIG_OPTION_MTU)
- ChannelData->RemoteMTU = *((uint16_t*)OptionData);
-
- /* Progress to the next option in the packet */
- OptionPos += (sizeof(BT_Config_Option_Header_t) + OptionHeader->Length);
- }
- }
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_ConfigurationResp_t ConfigurationResponse;
- } ResponsePacket;
-
- /* Fill out the Signal Command header in the response packet */
- ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_RESPONSE;
- ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier;
- ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.ConfigurationResponse);
-
- /* Fill out the Configuration Response in the response packet */
- ResponsePacket.ConfigurationResponse.SourceChannel = (ChannelData != NULL) ? ChannelData->RemoteNumber : 0;
- ResponsePacket.ConfigurationResponse.Flags = 0x00;
- ResponsePacket.ConfigurationResponse.Result = (ChannelData != NULL) ? BT_CONFIGURATION_SUCCESSFUL : BT_CONFIGURATION_REJECTED;
-
- Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL);
-
- if (ChannelData != NULL)
- {
- switch (ChannelData->State)
- {
- case BT_Channel_Config_WaitConfig:
- ChannelData->State = BT_Channel_Config_WaitSendConfig;
- break;
- case BT_Channel_Config_WaitReqResp:
- ChannelData->State = BT_Channel_Config_WaitResp;
- break;
- case BT_Channel_Config_WaitReq:
- ChannelData->State = BT_Channel_Open;
- Bluetooth_ChannelOpened(ChannelData);
- break;
- }
- }
-
- BT_ACL_DEBUG(1, ">> L2CAP Configuration Response");
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.ConfigurationResponse.SourceChannel);
- BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.ConfigurationResponse.Result);
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for a Configuration Response command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_ConfigurationResp_t ConfigurationResponse;
-
- Pipe_Read_Stream_LE(&ConfigurationResponse, sizeof(ConfigurationResponse), NULL);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- BT_ACL_DEBUG(1, "<< L2CAP Configuration Response");
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConfigurationResponse.SourceChannel);
- BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConfigurationResponse.Result);
-
- /* Search for the referenced channel in the channel information list */
- Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationResponse.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER);
-
- /* Only update the channel's state if it was found in the channel list */
- if (ChannelData != NULL)
- {
- /* Check if the channel configuration completed successfully */
- if (ConfigurationResponse.Result == BT_CONFIGURATION_SUCCESSFUL)
- {
- switch (ChannelData->State)
- {
- case BT_Channel_Config_WaitReqResp:
- ChannelData->State = BT_Channel_Config_WaitReq;
- break;
- case BT_Channel_Config_WaitResp:
- ChannelData->State = BT_Channel_Open;
- Bluetooth_ChannelOpened(ChannelData);
- break;
- }
- }
- else
- {
- /* Configuration failed - close the channel */
- ChannelData->State = BT_Channel_Closed;
- }
- }
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for a Disconnection Request command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_DisconnectionReq(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_DisconnectionReq_t DisconnectionRequest;
-
- Pipe_Read_Stream_LE(&DisconnectionRequest, sizeof(DisconnectionRequest), NULL);
-
- BT_ACL_DEBUG(1, "<< L2CAP Disconnection Request");
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionRequest.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionRequest.SourceChannel);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- /* Search for the referenced channel in the channel information list */
- Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionRequest.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER);
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_DisconnectionResp_t DisconnectionResponse;
- } ResponsePacket;
-
- /* Fill out the Signal Command header in the response packet */
- ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_RESPONSE;
- ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier;
- ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.DisconnectionResponse);
-
- /* Fill out the Disconnection Response in the response packet */
- ResponsePacket.DisconnectionResponse.DestinationChannel = (ChannelData != NULL) ? ChannelData->RemoteNumber : 0;
- ResponsePacket.DisconnectionResponse.SourceChannel = (ChannelData != NULL) ? ChannelData->LocalNumber : 0;
-
- Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL);
-
- /* If the channel was found in the channel list, close it */
- if (ChannelData != NULL)
- ChannelData->State = BT_Channel_Closed;
-
- BT_ACL_DEBUG(1, ">> L2CAP Disconnection Response");
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.DisconnectionResponse.SourceChannel);
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ResponsePacket.DisconnectionResponse.DestinationChannel);
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for a Disconnection Response command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_DisconnectionResp(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_DisconnectionResp_t DisconnectionResponse;
-
- Pipe_Read_Stream_LE(&DisconnectionResponse, sizeof(DisconnectionResponse), NULL);
-
- BT_ACL_DEBUG(1, "<< L2CAP Disconnection Response");
- BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionResponse.DestinationChannel);
- BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionResponse.SourceChannel);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- /* Search for the referenced channel in the channel information list */
- Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionResponse.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER);
-
- /* If the channel was found in the channel list, close it */
- if (ChannelData != NULL)
- ChannelData->State = BT_Channel_Closed;
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for an Echo Request command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_ACL_DEBUG(1, "<< L2CAP Echo Request");
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- } ResponsePacket;
-
- /* Fill out the Signal Command header in the response packet */
- ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_ECHO_RESPONSE;
- ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier;
- ResponsePacket.SignalCommandHeader.Length = 0;
-
- Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL);
-
- BT_ACL_DEBUG(1, ">> L2CAP Echo Response");
-}
-
-/** Internal Bluetooth stack Signal Command processing routine for an Information Request command.
- *
- * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header
- */
-static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* const SignalCommandHeader)
-{
- BT_Signal_InformationReq_t InformationRequest;
-
- Pipe_Read_Stream_LE(&InformationRequest, sizeof(InformationRequest), NULL);
-
- BT_ACL_DEBUG(1, "<< L2CAP Information Request");
- BT_ACL_DEBUG(2, "-- Info Type: 0x%04X", InformationRequest.InfoType);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- struct
- {
- BT_Signal_Header_t SignalCommandHeader;
- BT_Signal_InformationResp_t InformationResponse;
-
- uint8_t Data[4];
- } ResponsePacket;
-
- uint8_t DataLen = 0;
-
- /* Retrieve the requested information and store it in the outgoing packet, if found */
- switch (InformationRequest.InfoType)
- {
- case BT_INFOREQ_MTU:
- ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL;
- DataLen = 2;
-
- *((uint16_t*)&ResponsePacket.Data) = MAXIMUM_CHANNEL_MTU;
- break;
- case BT_INFOREQ_EXTENDEDFEATURES:
- ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL;
- DataLen = 4;
-
- *((uint32_t*)&ResponsePacket.Data) = 0;
- break;
- default:
- ResponsePacket.InformationResponse.Result = BT_INFORMATION_NOTSUPPORTED;
- DataLen = 0;
- break;
- }
-
- /* Fill out the Signal Command header in the response packet */
- ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_INFORMATION_RESPONSE;
- ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier;
- ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.InformationResponse) + DataLen;
-
- /* Fill out the Information Response in the response packet */
- ResponsePacket.InformationResponse.InfoType = InformationRequest.InfoType;
-
- Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket) - sizeof(ResponsePacket.Data) + DataLen), NULL);
-
- BT_ACL_DEBUG(1, ">> L2CAP Information Response");
- BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.InformationResponse.Result);
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for BluetoothACLPackets.c.
- */
-
-#ifndef _BLUETOOTH_ACLPACKETS_
-#define _BLUETOOTH_ACLPACKETS_
-
- /* Includes: */
- #include <avr/io.h>
- #include <string.h>
- #include <stdbool.h>
- #include <stdio.h>
-
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
-
- #include "BluetoothStack.h"
-
- /* Macros: */
- #define BT_ACL_DEBUG(l, s, ...) do { if (ACL_DEBUG_LEVEL >= l) printf_P(PSTR("(ACL) " s "\r\n"), ##__VA_ARGS__); } while (0)
- #define ACL_DEBUG_LEVEL 0
-
- /** Lowest possible channel number for L2CAP data channels. */
- #define BT_CHANNELNUMBER_BASEOFFSET 0x0040
-
- /** Bluetooth specification defined channel number for signaling commands. */
- #define BT_CHANNEL_SIGNALING 0x0001
-
- /** Bluetooth specification defined channel number for connectionless data. */
- #define BT_CHANNEL_CONNECTIONLESS 0x0002
-
- #define BT_ACL_FIRST_AUTOFLUSH (1 << 13)
-
- #define BT_SIGNAL_COMMAND_REJECT 0x01
- #define BT_SIGNAL_CONNECTION_REQUEST 0x02
- #define BT_SIGNAL_CONNECTION_RESPONSE 0x03
- #define BT_SIGNAL_CONFIGURATION_REQUEST 0x04
- #define BT_SIGNAL_CONFIGURATION_RESPONSE 0x05
- #define BT_SIGNAL_DISCONNECTION_REQUEST 0x06
- #define BT_SIGNAL_DISCONNECTION_RESPONSE 0x07
- #define BT_SIGNAL_ECHO_REQUEST 0x08
- #define BT_SIGNAL_ECHO_RESPONSE 0x09
- #define BT_SIGNAL_INFORMATION_REQUEST 0x0A
- #define BT_SIGNAL_INFORMATION_RESPONSE 0x0B
-
- #define BT_INFOREQ_MTU 0x0001
- #define BT_INFOREQ_EXTENDEDFEATURES 0x0002
-
- #define BT_INFORMATION_SUCCESSFUL 0x0000
- #define BT_INFORMATION_NOTSUPPORTED 0x0001
-
- #define BT_CONNECTION_SUCCESSFUL 0x0000
- #define BT_CONNECTION_REFUSED_PSM 0x0002
- #define BT_CONNECTION_REFUSED_RESOURCES 0x0004
-
- #define BT_CONFIGURATION_SUCCESSFUL 0x0000
- #define BT_CONFIGURATION_REJECTED 0x0002
- #define BT_CONFIGURATION_UNKNOWNOPTIONS 0x0003
-
- #define BT_CONFIG_OPTION_MTU 1
-
- /* Type Defines: */
- /** Bluetooth ACL header structure, common to all ACL data packets. */
- typedef struct
- {
- uint16_t ConnectionHandle; /**< Unique device connection handle of the ACL packet */
- uint16_t DataLength; /**< Length of the packet payload, in bytes */
- } BT_ACL_Header_t;
-
- /** Bluetooth ACL data packet header structure, for ACL packets containing L2CAP data. */
- typedef struct
- {
- uint16_t PayloadLength; /**< Size of the data payload, in bytes */
- uint16_t DestinationChannel; /**< Destination channel in the device the data is directed to */
- } BT_DataPacket_Header_t;
-
- /** Bluetooth signaling command header structure, for all ACL packets containing a signaling command. */
- typedef struct
- {
- uint8_t Code; /**< Signal code, a \c BT_SIGNAL_* mask value */
- uint8_t Identifier; /**< Unique signal command identifier to link requests and responses */
- uint16_t Length; /**< Length of the signaling command data, in bytes */
- } BT_Signal_Header_t;
-
- /** Connection Request signaling command structure, for channel connection requests. */
- typedef struct
- {
- uint16_t PSM; /**< Type of data the channel will carry, a \c CHANNEL_PSM_* mask value */
- uint16_t SourceChannel; /**< Channel source on the sending device this channel will link to */
- } BT_Signal_ConnectionReq_t;
-
- /** Connection response signaling command structure, for responses to channel connection requests. */
- typedef struct
- {
- uint16_t DestinationChannel; /**< Destination device channel that the connection request was processed on */
- uint16_t SourceChannel; /**< Source device channel address that the connection request came from */
- uint16_t Result; /**< Connection result, a \c BT_CONNECTION_* mask value */
- uint16_t Status; /**< Status of the request if the result was set to the Pending value */
- } BT_Signal_ConnectionResp_t;
-
- /** Disconnection request signaling command structure, for channel disconnection requests. */
- typedef struct
- {
- uint16_t DestinationChannel; /**< Destination channel address which is to be disconnected */
- uint16_t SourceChannel; /**< Source channel address which is to be disconnected */
- } BT_Signal_DisconnectionReq_t;
-
- /** Disconnection response signaling command structure, for responses to channel disconnection requests. */
- typedef struct
- {
- uint16_t DestinationChannel; /**< Destination channel address which was disconnected */
- uint16_t SourceChannel; /**< Source channel address which was disconnected */
- } BT_Signal_DisconnectionResp_t;
-
- /** Configuration Request signaling command structure, for channel configuration requests. */
- typedef struct
- {
- uint16_t DestinationChannel; /**< Destination channel address which is to be configured */
- uint16_t Flags; /**< Configuration flags for the request, including command continuation */
- } BT_Signal_ConfigurationReq_t;
-
- /** Configuration Response signaling command structure, for responses to channel configuration requests. */
- typedef struct
- {
- uint16_t SourceChannel; /**< Source channel that the configuration request was directed at */
- uint16_t Flags; /**< Configuration flags for the response, including response continuation */
- uint16_t Result; /**< Configuration result, a \c BT_CONFIGURATION_* mask value */
- } BT_Signal_ConfigurationResp_t;
-
- /** Information Request signaling command structure, for device information requests. */
- typedef struct
- {
- uint16_t InfoType; /**< Data type that is being requested, a \c BT_INFOREQ_* mask value */
- } BT_Signal_InformationReq_t;
-
- /** Information Response signaling command structure, for responses to information requests. */
- typedef struct
- {
- uint16_t InfoType; /**< Data type that was requested, a \c BT_INFOREQ_* mask value */
- uint16_t Result; /**< Result of the request, a \c BT_INFORMATION_* mask value */
- } BT_Signal_InformationResp_t;
-
- /** Configuration Option header structure, placed at the start of each option in a Channel Configuration
- * request's options list.
- */
- typedef struct
- {
- uint8_t Type; /**< Option type, a \c BT_CONFIG_OPTION_* mask value */
- uint8_t Length; /**< Length of the option's value, in bytes */
- } BT_Config_Option_Header_t;
-
- /* Function Prototypes: */
- void Bluetooth_ACLTask(void);
-
- #if defined(INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C)
- static void Bluetooth_ProcessIncomingACLPackets(void);
-
- static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_DisconnectionReq(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_DisconnectionResp(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const SignalCommandHeader);
- static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* const SignalCommandHeader);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Bluetooth class codes, used to describe the type and overall function of a
- * Bluetooth device to other Bluetooth devices.
- */
-
-#ifndef _BLUETOOTH_CLASS_CODES_H_
-#define _BLUETOOTH_CLASS_CODES_H_
-
- /* Macros: */
- #define DEVICE_CLASS_SERVICE_POSITIONING (1UL << 16)
- #define DEVICE_CLASS_SERVICE_NETWORKING (1UL << 17)
- #define DEVICE_CLASS_SERVICE_RENDERING (1UL << 18)
- #define DEVICE_CLASS_SERVICE_CAPTURING (1UL << 19)
- #define DEVICE_CLASS_SERVICE_OBJECTTRANSFER (1UL << 20)
- #define DEVICE_CLASS_SERVICE_AUDIO (1UL << 21)
- #define DEVICE_CLASS_SERVICE_TELEPHONY (1UL << 22)
- #define DEVICE_CLASS_SERVICE_INFORMATION (1UL << 23)
-
- #define DEVICE_CLASS_MAJOR_MISC (0x00 << 8)
- #define DEVICE_CLASS_MAJOR_COMPUTER (0x01 << 8)
- #define DEVICE_CLASS_MAJOR_PHONE (0x02 << 8)
- #define DEVICE_CLASS_MAJOR_LAN (0x03 << 8)
- #define DEVICE_CLASS_MAJOR_AUDIOVIDEO (0x04 << 8)
- #define DEVICE_CLASS_MAJOR_PERIPHERAL (0x05 << 8)
- #define DEVICE_CLASS_MAJOR_IMAGING (0x06 << 8)
- #define DEVICE_CLASS_MAJOR_UNCLASSIFIED (0x1F << 8)
-
- #define DEVICE_CLASS_MINOR_COMPUTER_UNCATEGORIZED (0x00 << 2)
- #define DEVICE_CLASS_MINOR_COMPUTER_DESKTOP (0x01 << 2)
- #define DEVICE_CLASS_MINOR_COMPUTER_SERVER (0x02 << 2)
- #define DEVICE_CLASS_MINOR_COMPUTER_LAPTOP (0x03 << 2)
- #define DEVICE_CLASS_MINOR_COMPUTER_HANDHELD (0x04 << 2)
- #define DEVICE_CLASS_MINOR_COMPUTER_PALM (0x05 << 2)
- #define DEVICE_CLASS_MINOR_COMPUTER_WEARABLE (0x06 << 2)
-
- #define DEVICE_CLASS_MINOR_PHONE_UNCATEGORIZED (0x00 << 2)
- #define DEVICE_CLASS_MINOR_PHONE_CELLULAR (0x01 << 2)
- #define DEVICE_CLASS_MINOR_PHONE_CORDLESS (0x02 << 2)
- #define DEVICE_CLASS_MINOR_PHONE_SMARTPHONE (0x03 << 2)
- #define DEVICE_CLASS_MINOR_PHONE_WIREDMODEM (0x04 << 2)
- #define DEVICE_CLASS_MINOR_PHONE_ISDN (0x05 << 2)
-
- #define DEVICE_CLASS_MINOR_LAN_FULLY_AVAILABLE (0x00 << 5)
- #define DEVICE_CLASS_MINOR_LAN_1_TO_17_PC_UTILIZED (0x01 << 5)
- #define DEVICE_CLASS_MINOR_LAN_17_TO_33_PC_UTILIZED (0x02 << 5)
- #define DEVICE_CLASS_MINOR_LAN_33_TO_50_PC_UTILIZED (0x03 << 5)
- #define DEVICE_CLASS_MINOR_LAN_50_TO_67_PC_UTILIZED (0x04 << 5)
- #define DEVICE_CLASS_MINOR_LAN_67_TO_83_PC_UTILIZED (0x05 << 5)
- #define DEVICE_CLASS_MINOR_LAN_83_TO_99_PC_UTILIZED (0x06 << 5)
- #define DEVICE_CLASS_MINOR_LAN_NO_SERVICE_AVAILABLE (0x07 << 5)
-
- #define DEVICE_CLASS_MINOR_AV_UNCATEGORIZED (0x00 << 2)
- #define DEVICE_CLASS_MINOR_AV_HEADSET (0x01 << 2)
- #define DEVICE_CLASS_MINOR_AV_HANDSFREE (0x02 << 2)
- #define DEVICE_CLASS_MINOR_AV_MICROPHONE (0x04 << 2)
- #define DEVICE_CLASS_MINOR_AV_LOUDSPEAKER (0x05 << 2)
- #define DEVICE_CLASS_MINOR_AV_HEADPHONES (0x06 << 2)
- #define DEVICE_CLASS_MINOR_AV_PORTABLE_AUDIO (0x07 << 2)
- #define DEVICE_CLASS_MINOR_AV_CARAUDIO (0x08 << 2)
- #define DEVICE_CLASS_MINOR_AV_SETTOP_BOX (0x09 << 2)
- #define DEVICE_CLASS_MINOR_AV_HIFI (0x0A << 2)
- #define DEVICE_CLASS_MINOR_AV_VCR (0x0B << 2)
- #define DEVICE_CLASS_MINOR_AV_VIDEO_CAMERA (0x0C << 2)
- #define DEVICE_CLASS_MINOR_AV_CAMCORDER (0x0D << 2)
- #define DEVICE_CLASS_MINOR_AV_VIDEO_MONITOR (0x0E << 2)
- #define DEVICE_CLASS_MINOR_AV_DISPLAY_AND_LOUDSPEAKER (0x0F << 2)
- #define DEVICE_CLASS_MINOR_AV_VIDEO_CONFERENCING (0x10 << 2)
- #define DEVICE_CLASS_MINOR_AV_GAMING_TOY (0x12 << 2)
-
- #define DEVICE_CLASS_MINOR_PERIPHERAL_KEYBOARD (0x01 << 6)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_POINTING (0x02 << 6)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_COMBO (0x03 << 6)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_UNCATEGORIZED (0x00 << 2)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_JOYSTICK (0x01 << 2)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_GAMEPAD (0x02 << 2)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_REMOTE_CONTROL (0x03 << 2)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_SENSING_DEVICE (0x04 << 2)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_DIGITIZER (0x05 << 2)
- #define DEVICE_CLASS_MINOR_PERIPHERAL_CARD_READER (0x06 << 2)
-
- #define DEVICE_CLASS_MINOR_IMAGING_DISPLAY (1 << 4)
- #define DEVICE_CLASS_MINOR_IMAGING_CAMERA (1 << 5)
- #define DEVICE_CLASS_MINOR_IMAGING_SCANNER (1 << 6)
- #define DEVICE_CLASS_MINOR_IMAGING_PRINTER (1 << 7)
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Bluetooth HCI layer management code. This module manages the overall
- * Bluetooth stack connection state to and from other devices, processes
- * received events from the Bluetooth controller, and issues commands to
- * modify the controller's configuration, such as the broadcast name of the
- * device.
- */
-
-/*
- TODO: Add local to remote device connections
- */
-
-#define INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C
-#include "BluetoothHCICommands.h"
-
-/** Temporary Bluetooth Device Address, for HCI responses which must include the destination address */
-static uint8_t Bluetooth_TempDeviceAddress[6];
-
-/** Bluetooth HCI processing task. This task should be called repeatedly the main Bluetooth
- * stack task to manage the HCI processing state.
- */
-void Bluetooth_HCITask(void)
-{
- BT_HCICommand_Header_t HCICommandHeader;
-
- switch (Bluetooth_State.CurrentHCIState)
- {
- case Bluetooth_ProcessEvents:
- Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE);
- Pipe_Unfreeze();
-
- if (Pipe_IsReadWriteAllowed())
- {
- BT_HCIEvent_Header_t HCIEventHeader;
-
- /* Read in the event header to fetch the event code and payload length */
- Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader), NULL);
-
- /* Create a temporary buffer for the event parameters */
- uint8_t EventParams[HCIEventHeader.ParameterLength];
-
- /* Read in the event parameters into the temporary buffer */
- Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength, NULL);
- Pipe_ClearIN();
-
- BT_HCI_DEBUG(1, "Event Received (0x%02X)", HCIEventHeader.EventCode);
-
- switch (HCIEventHeader.EventCode)
- {
- case EVENT_COMMAND_COMPLETE:
- BT_HCI_DEBUG(1, "<< Command Complete");
-
- /* Check which operation was completed in case we need to process the even parameters */
- switch (((BT_HCIEvent_CommandComplete_t*)&EventParams)->Opcode)
- {
- case (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBDADDR):
- /* A READ BDADDR command completed, copy over the local device's BDADDR from the response */
- memcpy(Bluetooth_State.LocalBDADDR,
- &((BT_HCIEvent_CommandComplete_t*)&EventParams)->ReturnParams[1],
- sizeof(Bluetooth_State.LocalBDADDR));
- break;
- }
-
- Bluetooth_State.CurrentHCIState = Bluetooth_State.NextHCIState;
- break;
- case EVENT_COMMAND_STATUS:
- BT_HCI_DEBUG(1, "<< Command Status");
- BT_HCI_DEBUG(2, "-- Status Code: 0x%02X", (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status));
-
- /* If the execution of a command failed, reset the stack */
- if (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status)
- Bluetooth_State.CurrentHCIState = Bluetooth_Init;
- break;
- case EVENT_CONNECTION_REQUEST:
- BT_HCI_DEBUG(1, "<< Connection Request");
- BT_HCI_DEBUG(2, "-- Link Type: 0x%02X", (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType));
-
- /* Need to store the remote device's BT address in a temporary buffer for later use */
- memcpy(Bluetooth_TempDeviceAddress,
- &((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress,
- sizeof(Bluetooth_TempDeviceAddress));
-
- bool IsACLConnection = (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType == 0x01);
-
- /* Only accept the connection if it is a ACL (data) connection, a device is not already connected
- and the user application has indicated that the connection should be allowed */
- Bluetooth_State.CurrentHCIState = (Bluetooth_Connection.IsConnected || !(IsACLConnection) ||
- !(Bluetooth_ConnectionRequest(Bluetooth_TempDeviceAddress))) ?
- Bluetooth_Conn_RejectConnection : Bluetooth_Conn_AcceptConnection;
-
- BT_HCI_DEBUG(2, "-- Connection %S", (Bluetooth_State.CurrentHCIState == Bluetooth_Conn_RejectConnection) ?
- PSTR("REJECTED") : PSTR("ACCEPTED"));
-
- break;
- case EVENT_PIN_CODE_REQUEST:
- BT_HCI_DEBUG(1, "<< Pin Code Request");
-
- /* Need to store the remote device's BT address in a temporary buffer for later use */
- memcpy(Bluetooth_TempDeviceAddress,
- &((BT_HCIEvent_PinCodeReq_t*)&EventParams)->RemoteAddress,
- sizeof(Bluetooth_TempDeviceAddress));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_Conn_SendPINCode;
- break;
- case EVENT_LINK_KEY_REQUEST:
- BT_HCI_DEBUG(1, "<< Link Key Request");
-
- /* Need to store the remote device's BT address in a temporary buffer for later use */
- memcpy(Bluetooth_TempDeviceAddress,
- &((BT_HCIEvent_LinkKeyReq_t*)&EventParams)->RemoteAddress,
- sizeof(Bluetooth_TempDeviceAddress));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_Conn_SendLinkKeyNAK;
- break;
- case EVENT_CONNECTION_COMPLETE:
- BT_HCI_DEBUG(1, "<< Connection Complete");
- BT_HCI_DEBUG(2, "-- Handle: 0x%04X", ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle);
-
- /* Need to store the remote device's BT address in a temporary buffer for later use */
- memcpy(Bluetooth_Connection.RemoteAddress,
- &((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->RemoteAddress,
- sizeof(Bluetooth_TempDeviceAddress));
-
- /* Store the created connection handle and indicate that the connection has been established */
- Bluetooth_Connection.ConnectionHandle = ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle;
- Bluetooth_Connection.IsConnected = true;
-
- Bluetooth_ConnectionComplete();
- break;
- case EVENT_DISCONNECTION_COMPLETE:
- BT_HCI_DEBUG(1, "<< Disconnection Complete");
-
- /* Device disconnected, indicate connection information no longer valid */
- Bluetooth_Connection.IsConnected = false;
-
- Bluetooth_DisconnectionComplete();
- break;
- }
- }
-
- Pipe_Freeze();
-
- break;
- case Bluetooth_Init:
- BT_HCI_DEBUG(1, "# Init");
-
- Bluetooth_State.IsInitialized = false;
-
- /* Reset the connection information structure to destroy any previous connection state */
- memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_Init_Reset;
- break;
- case Bluetooth_Init_Reset:
- BT_HCI_DEBUG(1, "# Reset");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_RESET),
- ParameterLength: 0,
- };
-
- /* Send the command to reset the Bluetooth dongle controller */
- Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0);
-
- Bluetooth_State.NextHCIState = Bluetooth_Init_ReadBufferSize;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_ReadBufferSize:
- BT_HCI_DEBUG(1, "# Read Buffer Size");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBUFFERSIZE),
- ParameterLength: 0,
- };
-
- /* Send the command to read the Bluetooth buffer size (mandatory before device sends any data) */
- Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0);
-
- Bluetooth_State.NextHCIState = Bluetooth_Init_GetBDADDR;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_GetBDADDR:
- BT_HCI_DEBUG(1, "# Get BDADDR");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBDADDR),
- ParameterLength: 0,
- };
-
- /* Send the command to retrieve the BDADDR of the inserted Bluetooth dongle */
- Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0);
-
- Bluetooth_State.NextHCIState = Bluetooth_Init_SetLocalName;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_SetLocalName:
- BT_HCI_DEBUG(1, "# Set Local Name");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME),
- ParameterLength: 248,
- };
-
- /* Send the command to set the Bluetooth dongle's name for other devices to see */
- Bluetooth_SendHCICommand(&HCICommandHeader, Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
-
- Bluetooth_State.NextHCIState = Bluetooth_Init_SetDeviceClass;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_SetDeviceClass:
- BT_HCI_DEBUG(1, "# Set Device Class");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE),
- ParameterLength: 3,
- };
-
- /* Send the command to set the class of the device for other devices to see */
- Bluetooth_SendHCICommand(&HCICommandHeader, &Bluetooth_DeviceConfiguration.Class, 3);
-
- Bluetooth_State.NextHCIState = Bluetooth_Init_WriteScanEnable;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_WriteScanEnable:
- BT_HCI_DEBUG(1, "# Write Scan Enable");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE),
- ParameterLength: 1,
- };
-
- uint8_t Interval = BT_SCANMODE_InquiryAndPageScans;
-
- /* Send the command to set the remote device scanning mode */
- Bluetooth_SendHCICommand(&HCICommandHeader, &Interval, 1);
-
- Bluetooth_State.NextHCIState = Bluetooth_Init_FinalizeInit;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Init_FinalizeInit:
- Bluetooth_State.IsInitialized = true;
-
- /* Fire the user application callback to indicate that the stack is now fully initialized */
- Bluetooth_StackInitialized();
-
- Bluetooth_State.NextHCIState = Bluetooth_ProcessEvents;
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Conn_AcceptConnection:
- BT_HCI_DEBUG(1, "# Accept Connection");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST),
- ParameterLength: sizeof(BT_HCICommand_AcceptConnectionReq_t),
- };
-
- /* Copy over the temporary BT device address saved from the Connection Request event, indicate slave
- connection role */
- BT_HCICommand_AcceptConnectionReq_t AcceptConnectionParams;
- memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress,
- sizeof(AcceptConnectionParams.RemoteAddress));
- AcceptConnectionParams.SlaveRole = true;
-
- /* Send the command to accept the remote connection request */
- Bluetooth_SendHCICommand(&HCICommandHeader, &AcceptConnectionParams, sizeof(BT_HCICommand_AcceptConnectionReq_t));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Conn_RejectConnection:
- BT_HCI_DEBUG(1, "# Reject Connection");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST),
- ParameterLength: sizeof(BT_HCICommand_RejectConnectionReq_t),
- };
-
- /* Copy over the temporary BT device address saved from the Connection Request event, indicate failure
- to accept the connection due to limited device resources or incorrect device address */
- BT_HCICommand_RejectConnectionReq_t RejectConnectionParams;
- memcpy(RejectConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(RejectConnectionParams.RemoteAddress));
- RejectConnectionParams.Reason = Bluetooth_Connection.IsConnected ? ERROR_LIMITED_RESOURCES : ERROR_UNACCEPTABLE_BDADDR;
-
- /* Send the command to reject the remote connection request */
- Bluetooth_SendHCICommand(&HCICommandHeader, &RejectConnectionParams, sizeof(BT_HCICommand_RejectConnectionReq_t));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Conn_SendPINCode:
- BT_HCI_DEBUG(1, "# Send Pin Code");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY),
- ParameterLength: sizeof(BT_HCICommand_PinCodeResp_t),
- };
-
- /* Copy over the temporary BT device address saved from the PIN Code Request event, copy over the
- local PIN authentication code to the response */
- BT_HCICommand_PinCodeResp_t PINCodeRequestParams;
- memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(PINCodeRequestParams.RemoteAddress));
- PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode);
- memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode));
-
- /* Send the command to transmit the device's local PIN number for authentication */
- Bluetooth_SendHCICommand(&HCICommandHeader, &PINCodeRequestParams, sizeof(BT_HCICommand_PinCodeResp_t));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- case Bluetooth_Conn_SendLinkKeyNAK:
- BT_HCI_DEBUG(1, "# Send Link Key NAK");
-
- HCICommandHeader = (BT_HCICommand_Header_t)
- {
- OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_LINK_KEY_REQUEST_NEG_REPLY),
- ParameterLength: sizeof(BT_HCICommand_LinkKeyNAKResp_t),
- };
-
- /* Copy over the temporary BT device address saved from the Link Key Request event */
- BT_HCICommand_LinkKeyNAKResp_t LinkKeyNAKParams;
- memcpy(LinkKeyNAKParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(LinkKeyNAKParams.RemoteAddress));
-
- /* Send the command to transmit the link key NAK to the receiver */
- Bluetooth_SendHCICommand(&HCICommandHeader, &LinkKeyNAKParams, sizeof(BT_HCICommand_LinkKeyNAKResp_t));
-
- Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents;
- break;
- }
-}
-
-/** Sends a Bluetooth HCI control command to the attached Bluetooth device.
- *
- * \param[in] HCICommandHeader HCI command header to send to the attached device
- * \param[in] Parameters Pointer to the source of the control parameters (if any)
- * \param[in] ParameterLength Length of the parameters to send in bytes
- *
- * \return A value from the USB_Host_SendControlErrorCodes_t enum.
- */
-static uint8_t Bluetooth_SendHCICommand(const BT_HCICommand_Header_t* const HCICommandHeader,
- const void* Parameters,
- const uint16_t ParameterLength)
-{
- /* Need to reserve the amount of bytes given in the header for the complete payload */
- uint8_t CommandBuffer[sizeof(BT_HCICommand_Header_t) + HCICommandHeader->ParameterLength];
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_DEVICE),
- .bRequest = 0,
- .wValue = 0,
- .wIndex = 0,
- .wLength = sizeof(CommandBuffer)
- };
-
- /* Copy over the HCI command header to the allocated buffer */
- memcpy(CommandBuffer, HCICommandHeader, sizeof(BT_HCICommand_Header_t));
-
- /* Zero out the parameter section of the response so that all padding bytes are known to be zero */
- memset(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], 0x00, HCICommandHeader->ParameterLength);
-
- /* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes
- may differ to those in the header; any difference in length is filled with 0x00 padding bytes */
- memcpy(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], Parameters, ParameterLength);
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest(CommandBuffer);
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for BluetoothHCICommands.c.
- */
-
-#ifndef _BLUETOOTH_HCICOMMANDS_H_
-#define _BLUETOOTH_HCICOMMANDS_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <string.h>
- #include <stdbool.h>
- #include <stdio.h>
-
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
-
- #include "BluetoothStack.h"
- #include "BluetoothClassCodes.h"
-
- /* Macros: */
- #define BT_HCI_DEBUG(l, s, ...) do { if (HCI_DEBUG_LEVEL >= l) printf_P(PSTR("(HCI) " s "\r\n"), ##__VA_ARGS__); } while (0)
- #define HCI_DEBUG_LEVEL 0
-
- #define OGF_LINK_CONTROL (0x01 << 10)
- #define OGF_CTRLR_BASEBAND (0x03 << 10)
- #define OGF_CTRLR_INFORMATIONAL (0x04 << 10)
-
- #define OCF_LINK_CONTROL_INQUIRY 0x0001
- #define OCF_LINK_CONTROL_INQUIRY_CANCEL 0x0002
- #define OCF_LINK_CONTROL_PERIODIC_INQUIRY 0x0003
- #define OCF_LINK_CONTROL_EXIT_PERIODIC_INQUIRY 0x0004
- #define OCF_LINK_CONTROL_CREATE_CONNECTION 0x0005
- #define OCF_LINK_CONTROL_DISCONNECT 0x0006
- #define OCF_LINK_CONTROL_CREATE_CONNECTION_CANCEL 0x0008
- #define OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST 0x0009
- #define OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST 0x000A
- #define OCF_LINK_CONTROL_LINK_KEY_REQUEST_REPLY 0x000B
- #define OCF_LINK_CONTROL_LINK_KEY_REQUEST_NEG_REPLY 0x000C
- #define OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY 0x000D
- #define OCF_LINK_CONTROL_PIN_CODE_REQUEST_NEG_REPLY 0x000E
- #define OCF_LINK_CONTROL_CHANGE_CONNECTION_PACKET_TYPE 0x000F
- #define OCF_LINK_CONTROL_REMOTE_NAME_REQUEST 0x0019
- #define OCF_CTRLR_BASEBAND_SET_EVENT_MASK 0x0001
- #define OCF_CTRLR_BASEBAND_RESET 0x0003
- #define OCF_CTRLR_BASEBAND_WRITE_PIN_TYPE 0x000A
- #define OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME 0x0013
- #define OCF_CTRLR_BASEBAND_READ_LOCAL_NAME 0x0014
- #define OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE 0x001A
- #define OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE 0x0024
- #define OCF_CTRLR_BASEBAND_WRITE_SIMPLE_PAIRING_MODE 0x0056
- #define OCF_CTRLR_BASEBAND_WRITE_AUTHENTICATION_ENABLE 0x0020
- #define OCF_CTRLR_INFORMATIONAL_READBUFFERSIZE 0x0005
- #define OCF_CTRLR_INFORMATIONAL_READBDADDR 0x0009
-
- #define EVENT_COMMAND_STATUS 0x0F
- #define EVENT_COMMAND_COMPLETE 0x0E
- #define EVENT_CONNECTION_COMPLETE 0x03
- #define EVENT_CONNECTION_REQUEST 0x04
- #define EVENT_DISCONNECTION_COMPLETE 0x05
- #define EVENT_REMOTE_NAME_REQUEST_COMPLETE 0x07
- #define EVENT_PIN_CODE_REQUEST 0x16
- #define EVENT_LINK_KEY_REQUEST 0x17
-
- #define ERROR_LIMITED_RESOURCES 0x0D
- #define ERROR_UNACCEPTABLE_BDADDR 0x0F
-
- /* Type Defines: */
- typedef struct
- {
- uint16_t OpCode;
- uint8_t ParameterLength;
- uint8_t Parameters[];
- } BT_HCICommand_Header_t;
-
- typedef struct
- {
- uint8_t EventCode;
- uint8_t ParameterLength;
- } BT_HCIEvent_Header_t;
-
- typedef struct
- {
- uint8_t Status;
- uint8_t Packets;
- uint16_t OpCode;
- } BT_HCIEvent_CommandStatus_t;
-
- typedef struct
- {
- uint8_t HCIPacketsAllowable;
- uint16_t Opcode;
- uint8_t ReturnParams[];
- } BT_HCIEvent_CommandComplete_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- uint8_t ClassOfDevice_Service;
- uint16_t ClassOfDevice_MajorMinor;
- uint8_t LinkType;
- } BT_HCIEvent_ConnectionRequest_t;
-
- typedef struct
- {
- uint8_t Status;
- uint16_t ConnectionHandle;
- uint8_t RemoteAddress[6];
- uint8_t LinkType;
- uint8_t EncryptionEnabled;
- } BT_HCIEvent_ConnectionComplete_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- } BT_HCIEvent_PinCodeReq_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- } BT_HCIEvent_LinkKeyReq_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- } BT_HCICommand_LinkKeyNAKResp_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- uint8_t PINCodeLength;
- char PINCode[16];
- } BT_HCICommand_PinCodeResp_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- uint8_t SlaveRole;
- } BT_HCICommand_AcceptConnectionReq_t;
-
- typedef struct
- {
- uint8_t RemoteAddress[6];
- uint8_t Reason;
- } BT_HCICommand_RejectConnectionReq_t;
-
- /* Enums: */
- enum BT_ScanEnable_Modes_t
- {
- BT_SCANMODE_NoScansEnabled = 0,
- BT_SCANMODE_InquiryScanOnly = 1,
- BT_SCANMODE_PageScanOnly = 2,
- BT_SCANMODE_InquiryAndPageScans = 3,
- };
-
- enum BT_HCIStates_t
- {
- Bluetooth_ProcessEvents = 0,
- Bluetooth_Init = 1,
- Bluetooth_Init_Reset = 2,
- Bluetooth_Init_ReadBufferSize = 3,
- Bluetooth_Init_GetBDADDR = 4,
- Bluetooth_Init_SetLocalName = 5,
- Bluetooth_Init_SetDeviceClass = 6,
- Bluetooth_Init_WriteScanEnable = 7,
- Bluetooth_Init_FinalizeInit = 8,
- Bluetooth_Conn_AcceptConnection = 9,
- Bluetooth_Conn_RejectConnection = 10,
- Bluetooth_Conn_SendPINCode = 11,
- Bluetooth_Conn_SendLinkKeyNAK = 12,
- };
-
- /* Function Prototypes: */
- void Bluetooth_HCITask(void);
-
- #if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C)
- static uint8_t Bluetooth_SendHCICommand(const BT_HCICommand_Header_t* const HCICommandHeader,
- const void* Parameters,
- const uint16_t ParameterLength);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main module for the Bluetooth stack. This module contains the overall Bluetooth
- * stack state variables and the main Bluetooth stack management functions.
- */
-
-#include "BluetoothStack.h"
-
-/** Bluetooth device connection information structure. Once connected to a remote device, this structure tracks the
- * connection state of the individual L2CAP channels.
- */
-Bluetooth_Connection_t Bluetooth_Connection = { IsConnected: false };
-
-/** Bluetooth device state information structure. This structure contains details on the current Bluetooth stack
- * state.
- */
-Bluetooth_Stack_State_t Bluetooth_State = { IsInitialized: false };
-
-/** Bluetooth stack initialization function. This function must be called once to initialize the Bluetooth stack,
- * ready for connection to remote devices.
- *
- * \note This function only begins the initialization process; the stack is initialized as the main Bluetooth stack
- * management task is repeatedly called. The initialization process ends when the IsInitialized element of the
- * \ref Bluetooth_State structure becomes true and the \ref Bluetooth_StackInitialized() callback fires.
- */
-void Bluetooth_Stack_Init(void)
-{
- /* Reset the HCI state machine - this will reset the adapter and stack when the Bluetooth stack task is called */
- Bluetooth_State.CurrentHCIState = Bluetooth_Init;
- Bluetooth_State.NextHCIState = Bluetooth_Init;
-}
-
-/** Bluetooth stack management task. This task must be repeatedly called to maintain the Bluetooth stack and any connection
- * to remote Bluetooth devices, including both the HCI control layer and the ACL channel layer.
- */
-void Bluetooth_Stack_USBTask(void)
-{
- if (USB_HostState != HOST_STATE_Configured)
- return;
-
- Bluetooth_HCITask();
- Bluetooth_ACLTask();
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for BluetoothStack.c.
- */
-
-#ifndef _BLUETOOTH_STACK_
-#define _BLUETOOTH_STACK_
-
- /* Includes: */
- #include <LUFA/Drivers/USB/USB.h>
-
- #include "../ConfigDescriptor.h"
-
- /* Macros: */
- #define BLUETOOTH_MAX_OPEN_CHANNELS 6
-
- #define CHANNEL_PSM_SDP 0x0001
- #define CHANNEL_PSM_UDP 0x0002
- #define CHANNEL_PSM_RFCOMM 0x0003
- #define CHANNEL_PSM_TCP 0x0004
- #define CHANNEL_PSM_IP 0x0009
- #define CHANNEL_PSM_FTP 0x000A
- #define CHANNEL_PSM_HTTP 0x000C
- #define CHANNEL_PSM_UPNP 0x0010
- #define CHANNEL_PSM_HIDP 0x0011
-
- #define CHANNEL_SEARCH_LOCALNUMBER 0
- #define CHANNEL_SEARCH_REMOTENUMBER 1
- #define CHANNEL_SEARCH_PSM 2
-
- #define MAXIMUM_CHANNEL_MTU 255
-
- /* Enums: */
- /** Enum for the possible states for a Bluetooth ACL channel. */
- enum BT_ChannelStates_t
- {
- BT_Channel_Closed = 0, /**< Channel is closed and inactive. No data may be sent or received. */
- BT_Channel_WaitConnect = 1, /**< A connection request has been received, but a response has not been sent. */
- BT_Channel_WaitConnectRsp = 2, /**< A connection request has been sent, but a response has not been received. */
- BT_Channel_Config_WaitConfig = 3, /**< Channel has been connected, but not yet configured on either end. */
- BT_Channel_Config_WaitSendConfig = 4, /**< Channel configuration has been received and accepted, but not yet sent. */
- BT_Channel_Config_WaitReqResp = 5, /**< Channel configuration has been sent but not responded to, and a configuration
- * request from the remote end has not yet been received.
- */
- BT_Channel_Config_WaitResp = 6, /**< Channel configuration has been sent but not accepted, but a configuration request
- * from the remote end has been accepted.
- */
- BT_Channel_Config_WaitReq = 7, /**< Channel configuration has been sent and accepted, but a configuration request
- * from the remote end has not yet been accepted.
- */
- BT_Channel_Open = 8, /**< Channel is open and ready to send or receive data */
- BT_Channel_WaitDisconnect = 9, /**< A disconnection request has been sent, but not yet acknowledged. */
- };
-
- /** Enum for the possible error codes returned by the \ref Bluetooth_SendPacket() function. */
- enum BT_SendPacket_ErrorCodes_t
- {
- BT_SENDPACKET_NoError = 0, /**< The packet was sent successfully. */
- BT_SENDPACKET_NotConnected = 1, /**< The Bluetooth stack is not currently connected to a remote device. */
- BT_SENDPACKET_ChannelNotOpen = 2, /**< The given channel is not currently in the Open state. */
- };
-
- /* Type Defines: */
- /** Type define for a Bluetooth ACL channel information structure. This structure contains all the relevant
- * information on an ACL channel for data transmission and reception by the stack.
- */
- typedef struct
- {
- uint8_t State; /**< Current channel state, a value from the \ref BT_ChannelStates_t enum. */
- uint16_t LocalNumber; /**< Local channel number on the device. */
- uint16_t RemoteNumber; /**< Remote channel number on the connected device. */
- uint16_t PSM; /**< Protocol used on the channel. */
- uint16_t LocalMTU; /**< MTU of data sent from the connected device to the local device. */
- uint16_t RemoteMTU; /**< MTU of data sent from the local device to the connected device. */
- } Bluetooth_Channel_t;
-
- /** Type define for a Bluetooth device connection information structure. This structure contains all the
- * information needed to maintain a connection to a remote Bluetooth device via the Bluetooth stack.
- */
- typedef struct
- {
- bool IsConnected; /**< Indicates if the stack is currently connected to a remote device - if this value is
- * false, the remaining elements are invalid.
- */
- uint16_t ConnectionHandle; /**< Connection handle to the remote device, used internally in the stack. */
- uint8_t RemoteAddress[6]; /**< Bluetooth device address of the attached remote device. */
- Bluetooth_Channel_t Channels[BLUETOOTH_MAX_OPEN_CHANNELS]; /**< Channel information structures for the connection. */
- uint8_t SignalingIdentifier; /**< Next Signaling Channel unique command sequence identifier. */
- } Bluetooth_Connection_t;
-
- /** Local Bluetooth device information structure, for the defining of local device characteristics for the Bluetooth stack. */
- typedef struct
- {
- uint32_t Class; /**< Class of the local device, a mask of \c DEVICE_CLASS_* masks. */
- char PINCode[16]; /**< Pin code required to send or receive in order to authenticate with a remote device. */
- char Name[]; /**< Name of the local Bluetooth device, up to 248 characters. */
- } Bluetooth_Device_t;
-
- /** Bluetooth stack state information structure, for the containment of the Bluetooth stack state. The values in
- * this structure are set by the Bluetooth stack internally, and should all be treated as read only by the user
- * application.
- */
- typedef struct
- {
- uint8_t CurrentHCIState; /**< Current HCI state machine state. */
- uint8_t NextHCIState; /**< Next HCI state machine state to progress to once the currently issued command completes. */
- bool IsInitialized; /**< Indicates if the Bluetooth stack is currently initialized and ready for connections
- * to or from a remote Bluetooth device.
- */
- uint8_t LocalBDADDR[6]; /**< Local Bluetooth adapter's BDADDR, valid when the stack is fully initialized. */
- } Bluetooth_Stack_State_t;
-
- /* Includes: */
- #include "BluetoothHCICommands.h"
- #include "BluetoothACLPackets.h"
-
- /* Function Prototypes: */
- void Bluetooth_Stack_Init(void);
- void Bluetooth_Stack_USBTask(void);
-
- void Bluetooth_StackInitialized(void);
- bool Bluetooth_ConnectionRequest(const uint8_t* RemoteAddress);
- void Bluetooth_ConnectionComplete(void);
- void Bluetooth_DisconnectionComplete(void);
- bool Bluetooth_ChannelConnectionRequest(const uint16_t PSM);
- void Bluetooth_PacketReceived(void* Data, uint16_t DataLen,
- Bluetooth_Channel_t* const ACLChannel);
- void Bluetooth_ChannelOpened(Bluetooth_Channel_t* const ACLChannel);
-
- Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue,
- const uint8_t SearchKey);
- Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM);
- void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel);
- uint8_t Bluetooth_SendPacket(void* Data,
- uint16_t DataLen,
- Bluetooth_Channel_t* const ACLChannel);
-
- /* External Variables: */
- extern Bluetooth_Device_t Bluetooth_DeviceConfiguration;
- extern Bluetooth_Connection_t Bluetooth_Connection;
- extern Bluetooth_Stack_State_t Bluetooth_State;
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * RFCOMM layer module. This module manages the RFCOMM layer of the
- * stack, providing virtual serial port channels on top of the lower
- * L2CAP layer.
- */
-
-#define INCLUDE_FROM_RFCOMM_C
-#include "RFCOMM.h"
-
-/** 8-Bit CRC table used by the FCS field of each RFCOMM encoded frame, sourced from the ETSI TS 101 369 V7.2.0
- * specification document, upon which the RFCOMM specification is based.
- */
-const uint8_t CRC8_Table[256] PROGMEM =
- {
- 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
- 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
- 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
- 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
- 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
- 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
- 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
- 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
- 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
- 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
- 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
- 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
- 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
- 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
- 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
- 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
- };
-
-/** RFCOMM channel state structure, to retain information about each open channel in the RFCOMM multiplexer. */
-RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS];
-
-
-/** Initializes the RFCOMM service, ready for new connections from a SDP client. */
-void RFCOMM_Initialize(void)
-{
- /* Reset the RFCOMM channel structures, to invalidate any configured RFCOMM channels */
- for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
- RFCOMM_Channels[i].State = RFCOMM_Channel_Closed;
-}
-
-/** Services all the logical RFCOMM channels on the given ACL channel, sending any RFCOMM control requests to
- * the remote device as needed to establish new logical RFCOMM channels. This function should be called repeatedly
- * in the main program loop when an ACL channel with an RFCOMM PSM has been established between the local and remote
- * device.
- *
- * \param[in] ACLChannel ACL channel which has been previously opened to handle RFCOMM traffic between devices
- */
-void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel)
-{
- /* Abort if the RFCOMM ACL channel is not currently open */
- if ((ACLChannel == NULL) || (ACLChannel->State != BT_Channel_Open))
- return;
-
- /* Loop through each of the RFCOMM channels, send any required RFCOMM control commands */
- for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
- {
- RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i];
-
- if (RFCOMMChannel->State == RFCOMM_Channel_Configure)
- {
- /* Check if the local signals have not yet been sent on the current channel */
- if (!(RFCOMMChannel->ConfigFlags & RFCOMM_CONFIG_LOCALSIGNALSSENT))
- {
- /* Indicate that the local signals have been sent, transmit them to the remote device */
- RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALSSENT;
- RFCOMM_SendChannelSignals(RFCOMMChannel, ACLChannel);
- }
-
- /* If signals have been configured in both directions, progress to the open state */
- if ((RFCOMMChannel->ConfigFlags & (RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS)) ==
- (RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS))
- {
- RFCOMMChannel->State = RFCOMM_Channel_Open;
- RFCOMM_ChannelOpened(RFCOMMChannel);
- }
- }
- }
-}
-
-/** Processes an incoming RFCOMM packet on an ACL channel which has been previously opened between the local and
- * a remote device to handle RFCOMM traffic.
- *
- * \param[in] Data Incoming packet data containing the RFCOMM packet
- * \param[in] ACLChannel ACL channel the request was issued to by the remote device
- */
-void RFCOMM_ProcessPacket(void* Data,
- Bluetooth_Channel_t* const ACLChannel)
-{
- const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data;
- const uint8_t* FrameData = (const uint8_t*)Data + sizeof(RFCOMM_Header_t);
- uint16_t FrameDataLen = RFCOMM_GetVariableFieldValue(&FrameData);
-
- /* Decode the RFCOMM frame type from the header */
- switch (FrameHeader->Control & ~FRAME_POLL_FINAL)
- {
- case RFCOMM_Frame_DM:
- RFCOMM_ProcessDM(&FrameHeader->Address, ACLChannel);
- break;
- case RFCOMM_Frame_DISC:
- RFCOMM_ProcessDISC(&FrameHeader->Address, ACLChannel);
- break;
- case RFCOMM_Frame_SABM:
- RFCOMM_ProcessSABM(&FrameHeader->Address, ACLChannel);
- break;
- case RFCOMM_Frame_UA:
- RFCOMM_ProcessUA(&FrameHeader->Address, ACLChannel);
- break;
- case RFCOMM_Frame_UIH:
- RFCOMM_ProcessUIH(&FrameHeader->Address, FrameDataLen, FrameData, ACLChannel);
- break;
- default:
- BT_RFCOMM_DEBUG(1, "<< Unknown Frame Received");
- break;
- }
-}
-
-/** Sends an RFCOMM notification to the remote device that the local terminal control signals (located in the
- * "Local" structure of the RFCOMM channel) have changed, pushing the new signals to the remote device.
- *
- * \param[in] RFCOMMChannel RFCOMM logical channel whose local terminal signals have changed
- * \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices
- */
-void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, ">> MSC Command");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
-
- struct
- {
- RFCOMM_Command_t CommandHeader;
- uint8_t Length;
- RFCOMM_MSC_Parameters_t Params;
- } MSCommand;
-
- MSCommand.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = true};
- MSCommand.Length = (sizeof(MSCommand.Params) << 1) | 0x01;
- MSCommand.Params.Channel = (RFCOMM_Address_t){.DLCI = RFCOMMChannel->DLCI, .EA = true, .CR = true};
- MSCommand.Params.Signals = RFCOMMChannel->Local.Signals;
- MSCommand.Params.BreakSignal = RFCOMMChannel->Local.BreakSignal;
-
- /* Send the MSC command to the remote device */
- RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel);
-}
-
-/** Sends new data through an open logical RFCOMM channel. This should be used to transmit data through a
- * RFCOMM channel once it has been opened.
- *
- * \param[in] DataLen Length of the RFCOMM data to send, in bytes
- * \param[in] Data Pointer to a buffer where the data to send is located
- * \param[in] RFCOMMChannel RFCOMM logical channel which is to be transmitted to
- * \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices
- */
-void RFCOMM_SendData(const uint16_t DataLen,
- const uint8_t* Data,
- const RFCOMM_Channel_t* const RFCOMMChannel,
- Bluetooth_Channel_t* const ACLChannel)
-{
- if (RFCOMMChannel->State != RFCOMM_Channel_Open)
- return;
-
- BT_RFCOMM_DEBUG(1, ">> UIH Frame");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
-
- /* Send the MSC command to the remote device */
- RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel);
-}
-
-RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI)
-{
- /* Find a free entry in the RFCOMM channel multiplexer state array */
- for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
- {
- RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i];
-
- /* If the channel's state is closed, the channel state entry is free */
- if (RFCOMMChannel->State == RFCOMM_Channel_Closed)
- {
- RFCOMMChannel->DLCI = DLCI;
- RFCOMMChannel->State = RFCOMM_Channel_Configure;
- RFCOMMChannel->Priority = 7 + (RFCOMMChannel->DLCI & 0xF8);
- RFCOMMChannel->MTU = 0xFFFF;
- RFCOMMChannel->Remote.Signals = 0 | (1 << 0);
- RFCOMMChannel->Remote.BreakSignal = 0 | (1 << 0);
- RFCOMMChannel->Local.Signals = RFCOMM_SIGNAL_RTC | RFCOMM_SIGNAL_RTR | RFCOMM_SIGNAL_DV | (1 << 0);
- RFCOMMChannel->Local.BreakSignal = 0 | (1 << 0);
- RFCOMMChannel->ConfigFlags = 0;
-
- return RFCOMMChannel;
- }
- }
-
- return NULL;
-}
-
-RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI)
-{
- /* Search through the RFCOMM channel list, looking for the specified channel */
- for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
- {
- RFCOMM_Channel_t* CurrRFCOMMChannel = &RFCOMM_Channels[i];
-
- /* If the current non-closed channel's DLCI matches the search DLCI, return it to the caller */
- if ((CurrRFCOMMChannel->State != RFCOMM_Channel_Closed) && (CurrRFCOMMChannel->DLCI == DLCI))
- return CurrRFCOMMChannel;
- }
-
- /* Channel not found in the channel state table, return failure */
- return NULL;
-}
-
-uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos)
-{
- uint8_t FirstOctet;
- uint8_t SecondOctet = 0;
-
- FirstOctet = **BufferPos;
- (*BufferPos)++;
-
- /* If the field size is more than a single byte, fetch the next byte in the variable length field */
- if (!(FirstOctet & 0x01))
- {
- SecondOctet = **BufferPos;
- (*BufferPos)++;
-
- /* Discard any remaining bytes in the variable length field that won't fit in the return value */
- while (!(**BufferPos & 0x01))
- (*BufferPos)++;
- }
-
- /* Bit-shift the bytes that comprise the variable length field so that they form a single integer */
- return (((uint16_t)SecondOctet << 7) | FirstOctet >> 1);
-}
-
-void RFCOMM_SendFrame(const uint8_t DLCI,
- const bool CommandResponse,
- const uint8_t Control,
- const uint16_t DataLen,
- const void* Data,
- Bluetooth_Channel_t* const ACLChannel)
-{
- struct
- {
- RFCOMM_Header_t FrameHeader;
- uint8_t Size[(DataLen < 128) ? 1 : 2];
- uint8_t Data[DataLen];
- uint8_t FCS;
- } ResponsePacket;
-
- /* Set the frame header values to the specified address and frame type */
- ResponsePacket.FrameHeader.Control = Control;
- ResponsePacket.FrameHeader.Address = (RFCOMM_Address_t){.DLCI = DLCI, .EA = true, .CR = CommandResponse};
-
- /* Set the lower 7 bits of the packet length */
- ResponsePacket.Size[0] = (DataLen << 1);
-
- /* Terminate the size field if size is 7 bits or lower, otherwise set the upper 8 bits of the length */
- if (DataLen < 128)
- ResponsePacket.Size[0] |= 0x01;
- else
- ResponsePacket.Size[1] = (DataLen >> 7);
-
- /* Copy over the packet data from the source buffer to the response packet buffer */
- memcpy(ResponsePacket.Data, Data, DataLen);
-
- /* Determine the length of the frame which is to be used to calculate the CRC value */
- uint8_t CRCLength = sizeof(ResponsePacket.FrameHeader);
-
- /* UIH frames do not have the CRC calculated on the Size field in the response, all other frames do */
- if ((Control & ~FRAME_POLL_FINAL) != RFCOMM_Frame_UIH)
- CRCLength += sizeof(ResponsePacket.Size);
-
- /* Calculate the frame checksum from the appropriate fields */
- ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, CRCLength);
-
- /* Send the completed response packet to the sender */
- Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), ACLChannel);
-}
-
-static uint8_t RFCOMM_GetFCSValue(const void* FrameStart,
- uint8_t Length)
-{
- uint8_t FCS = 0xFF;
-
- /* Calculate new Frame CRC value via the given data bytes and the CRC table */
- for (uint8_t i = 0; i < Length; i++)
- FCS = pgm_read_byte(&CRC8_Table[FCS ^ ((const uint8_t*)FrameStart)[i]]);
-
- return ~FCS;
-}
-
-static void RFCOMM_ProcessDM(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< DM Received");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
-}
-
-static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< DISC Received");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
-
- RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
-
- /* If the requested channel is currently open, destroy it */
- if (RFCOMMChannel != NULL)
- RFCOMMChannel->State = RFCOMM_Channel_Closed;
-
- BT_RFCOMM_DEBUG(1, ">> UA Sent");
- RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
-}
-
-static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< SABM Received");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
-
- if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
- {
- BT_RFCOMM_DEBUG(1, ">> UA Sent");
-
- /* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
- RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
-
- return;
- }
-
- /* Find the existing channel's entry in the channel table */
- RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
-
- /* Existing entry not found, create a new entry for the channel */
- if (RFCOMMChannel == NULL)
- RFCOMMChannel = RFCOMM_GetFreeChannelEntry(FrameAddress->DLCI);
-
- /* If space was found in the channel table for the new channel, ACK the request */
- if (RFCOMMChannel != NULL)
- {
- BT_RFCOMM_DEBUG(1, ">> UA Sent");
-
- /* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
- RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
- }
- else
- {
- BT_RFCOMM_DEBUG(1, ">> DM Sent");
-
- /* No free channel in the multiplexer - decline the SABM by sending a DM frame */
- RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_DM | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
- }
-}
-
-static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< UA Received");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
-}
-
-static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress,
- const uint16_t FrameLength,
- const uint8_t* FrameData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
- {
- RFCOMM_ProcessControlCommand(FrameData, ACLChannel);
- return;
- }
-
- BT_RFCOMM_DEBUG(1, "<< UIH Received");
- BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
- BT_RFCOMM_DEBUG(2, "-- Length 0x%02X", FrameLength);
-
- RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
-
- if (RFCOMMChannel != NULL)
- RFCOMM_DataReceived(RFCOMMChannel, FrameLength, FrameData);
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for RFCOMM.c.
- */
-
-#ifndef _RFCOMM_H_
-#define _RFCOMM_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/pgmspace.h>
- #include <string.h>
- #include <stdbool.h>
- #include <stdio.h>
-
- #include <LUFA/Common/Common.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
-
- #include "BluetoothStack.h"
- #include "RFCOMMControl.h"
-
- /* Macros: */
- #define BT_RFCOMM_DEBUG(l, s, ...) do { if (RFCOMM_DEBUG_LEVEL >= l) printf_P(PSTR("(RFCOMM) " s "\r\n"), ##__VA_ARGS__); } while (0)
- #define RFCOMM_DEBUG_LEVEL 0
-
- #define FRAME_POLL_FINAL (1 << 4)
-
- #define RFCOMM_CONTROL_DLCI 0
- #define RFCOMM_MAX_OPEN_CHANNELS 5
-
- /* Enums: */
- /** Enum for the types of RFCOMM frames which can be exchanged on a Bluetooth channel. */
- enum RFCOMM_Frame_Types_t
- {
- RFCOMM_Frame_DM = 0x0F, /**< Disconnected Mode Field */
- RFCOMM_Frame_DISC = 0x43, /**< Disconnect Field */
- RFCOMM_Frame_SABM = 0x2F, /**< Set Asynchronous Balance Mode Field */
- RFCOMM_Frame_UA = 0x63, /**< Unnumbered Acknowledgement Field */
- RFCOMM_Frame_UIH = 0xEF, /**< Unnumbered Information with Header check Field */
- };
-
- enum RFCOMM_Channel_States_t
- {
- RFCOMM_Channel_Closed = 0,
- RFCOMM_Channel_Configure = 1,
- RFCOMM_Channel_Open = 2,
- };
-
- /* Type Defines: */
- typedef struct
- {
- uint8_t DLCI;
- uint8_t State;
- uint8_t Priority;
- uint16_t MTU;
- uint8_t ConfigFlags;
- struct
- {
- uint8_t Signals;
- uint8_t BreakSignal;
- } Remote;
- struct
- {
- uint8_t Signals;
- uint8_t BreakSignal;
- } Local;
- } RFCOMM_Channel_t;
-
- /* External Variables: */
- extern RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS];
-
- /* Function Prototypes: */
- void RFCOMM_Initialize(void);
- void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel);
- void RFCOMM_ProcessPacket(void* Data,
- Bluetooth_Channel_t* const ACLChannel);
-
- void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel,
- Bluetooth_Channel_t* const ACLChannel);
- void RFCOMM_SendData(const uint16_t DataLen,
- const uint8_t* Data,
- const RFCOMM_Channel_t* const RFCOMMChannel,
- Bluetooth_Channel_t* const ACLChannel);
-
- void RFCOMM_ChannelOpened(RFCOMM_Channel_t* const RFCOMMChannel);
- void RFCOMM_DataReceived(RFCOMM_Channel_t* const RFCOMMChannel,
- uint16_t DataLen,
- const uint8_t* Data);
- void RFCOMM_ChannelSignalsReceived(RFCOMM_Channel_t* const RFCOMMChannel);
-
- RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI);
- RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI);
- uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos);
- void RFCOMM_SendFrame(const uint8_t DLCI,
- const bool CommandResponse,
- const uint8_t Control,
- const uint16_t DataLen,
- const void* Data,
- Bluetooth_Channel_t* const ACLChannel);
-
- #if defined(INCLUDE_FROM_RFCOMM_C)
- static uint8_t RFCOMM_GetFCSValue(const void* FrameStart,
- uint8_t Length);
-
- static void RFCOMM_ProcessDM(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress,
- const uint16_t FrameLength,
- const uint8_t* FrameData,
- Bluetooth_Channel_t* const ACLChannel);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * RFCOMM multiplexer control layer module. This module handles multiplexer
- * channel commands to the control DLCI in the RFCOMM layer, to open, configure,
- * test and close logical RFCOMM channels.
- */
-
-#define INCLUDE_FROM_RFCOMM_CONTROL_C
-#include "RFCOMMControl.h"
-
-void RFCOMM_ProcessControlCommand(const uint8_t* Command,
- Bluetooth_Channel_t* const ACLChannel)
-{
- const RFCOMM_Command_t* CommandHeader = (const RFCOMM_Command_t*)Command;
- const uint8_t* CommandData = (const uint8_t*)Command + sizeof(RFCOMM_Command_t);
- uint8_t CommandDataLen = RFCOMM_GetVariableFieldValue(&CommandData);
-
- switch (CommandHeader->Command)
- {
- case RFCOMM_Control_Test:
- RFCOMM_ProcessTestCommand(CommandHeader, CommandDataLen, CommandData, ACLChannel);
- break;
- case RFCOMM_Control_FlowControlEnable:
- RFCOMM_ProcessFCECommand(CommandHeader, CommandData, ACLChannel);
- break;
- case RFCOMM_Control_FlowControlDisable:
- RFCOMM_ProcessFCDCommand(CommandHeader, CommandData, ACLChannel);
- break;
- case RFCOMM_Control_ModemStatus:
- RFCOMM_ProcessMSCCommand(CommandHeader, CommandDataLen, CommandData, ACLChannel);
- break;
- case RFCOMM_Control_RemotePortNegotiation:
- RFCOMM_ProcessRPNCommand(CommandHeader, CommandData, ACLChannel);
- break;
- case RFCOMM_Control_RemoteLineStatus:
- RFCOMM_ProcessRLSCommand(CommandHeader, CommandData, ACLChannel);
- break;
- case RFCOMM_Control_DLCParameterNegotiation:
- RFCOMM_ProcessDPNCommand(CommandHeader, CommandData, ACLChannel);
- break;
- default:
- BT_RFCOMM_DEBUG(1, "<< Unknown Command");
- break;
- }
-}
-
-static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t CommandDataLen,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- const uint8_t* Params = (const uint8_t*)CommandData;
-
- BT_RFCOMM_DEBUG(1, "<< TEST Command");
-
- struct
- {
- RFCOMM_Command_t CommandHeader;
- uint8_t Length;
- uint8_t TestData[CommandDataLen];
- } TestResponse;
-
- /* Fill out the Test response data */
- TestResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_Test, .EA = true, .CR = false};
- TestResponse.Length = (CommandDataLen << 1) | 0x01;
- memcpy(TestResponse.TestData, Params, CommandDataLen);
-
- BT_RFCOMM_DEBUG(1, ">> TEST Response");
-
- /* Send the PDN response to acknowledge the command */
- RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH, sizeof(TestResponse), &TestResponse, ACLChannel);
-}
-
-static void RFCOMM_ProcessFCECommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< FCE Command");
-}
-
-static void RFCOMM_ProcessFCDCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< FCD Command");
-}
-
-static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t CommandDataLen,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- const RFCOMM_MSC_Parameters_t* Params = (const RFCOMM_MSC_Parameters_t*)CommandData;
-
- BT_RFCOMM_DEBUG(1, "<< MSC %s", (CommandHeader->CR) ? "Command" : "Response");
- BT_RFCOMM_DEBUG(2, "-- DLCI: 0x%02X", Params->Channel.DLCI);
-
- /* Ignore status flags sent to the control channel */
- if (Params->Channel.DLCI == RFCOMM_CONTROL_DLCI)
- return;
-
- /* Retrieve existing channel configuration data, if already opened */
- RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->Channel.DLCI);
-
- /* If the channel does not exist, abort */
- if (RFCOMMChannel == NULL)
- return;
-
- /* Check if the MSC packet is a command or a response */
- if (CommandHeader->CR)
- {
- /* Save the new channel signals to the channel state structure */
- RFCOMMChannel->Remote.Signals = Params->Signals;
- RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_REMOTESIGNALS;
-
- /* If the command contains the optional break signals field, store the value */
- if (CommandDataLen == sizeof(RFCOMM_MSC_Parameters_t))
- RFCOMMChannel->Remote.BreakSignal = Params->BreakSignal;
-
- /* Notify the user application that the signals have been received */
- RFCOMM_ChannelSignalsReceived(RFCOMMChannel);
-
- struct
- {
- RFCOMM_Command_t CommandHeader;
- uint8_t Length;
- RFCOMM_MSC_Parameters_t Params;
- } MSResponse;
-
- /* Fill out the MS response data */
- MSResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = false};
- MSResponse.Length = (CommandDataLen << 1) | 0x01;
- memcpy(&MSResponse.Params, Params, sizeof(RFCOMM_MSC_Parameters_t));
-
- BT_RFCOMM_DEBUG(1, ">> MSC Response");
-
- /* Send the MSC response to acknowledge the command */
- RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH,
- (sizeof(MSResponse) - sizeof(MSResponse.Params) + CommandDataLen), &MSResponse, ACLChannel);
- }
- else
- {
- /* Indicate that the remote device has acknowledged the sent signals */
- RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALS;
- }
-}
-
-static void RFCOMM_ProcessRPNCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< RPN Command");
-}
-
-static void RFCOMM_ProcessRLSCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- BT_RFCOMM_DEBUG(1, "<< RLS Command");
-}
-
-static void RFCOMM_ProcessDPNCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel)
-{
- const RFCOMM_DPN_Parameters_t* Params = (const RFCOMM_DPN_Parameters_t*)CommandData;
-
- BT_RFCOMM_DEBUG(1, "<< DPN Command");
- BT_RFCOMM_DEBUG(2, "-- DLCI: 0x%02X", Params->DLCI);
-
- /* Ignore parameter negotiations to the control channel */
- if (Params->DLCI == RFCOMM_CONTROL_DLCI)
- return;
-
- /* Retrieve existing channel configuration data, if already opened */
- RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->DLCI);
-
- /* Check if the channel has no corresponding entry - remote did not open it first */
- if (RFCOMMChannel == NULL)
- {
- /* Create a new entry in the channel table for the new channel */
- RFCOMMChannel = RFCOMM_GetFreeChannelEntry(Params->DLCI);
-
- /* No free entry was found, discard the request */
- if (RFCOMMChannel == NULL)
- {
- BT_RFCOMM_DEBUG(2, "-- No Free Channel");
- return;
- }
- }
-
- /* Save the new channel configuration */
- RFCOMMChannel->State = RFCOMM_Channel_Configure;
- RFCOMMChannel->Priority = Params->Priority;
- RFCOMMChannel->MTU = Params->MaximumFrameSize;
-
- struct
- {
- RFCOMM_Command_t CommandHeader;
- uint8_t Length;
- RFCOMM_DPN_Parameters_t Params;
- } DPNResponse;
-
- /* Fill out the DPN response data */
- DPNResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_DLCParameterNegotiation, .EA = true, .CR = false};
- DPNResponse.Length = (sizeof(DPNResponse.Params) << 1) | 0x01;
- memcpy(&DPNResponse.Params, Params, sizeof(RFCOMM_DPN_Parameters_t));
- DPNResponse.Params.ConvergenceLayer = 0x00; // TODO: Enable credit based transaction support
-
- BT_RFCOMM_DEBUG(1, ">> DPN Response");
-
- /* Send the DPN response to acknowledge the command */
- RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH, sizeof(DPNResponse), &DPNResponse, ACLChannel);
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for RFCOMMControl.c.
- */
-
-#ifndef _RFCOMM_CONTROL_H_
-#define _RFCOMM_CONTROL_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/pgmspace.h>
- #include <string.h>
- #include <stdbool.h>
- #include <stdio.h>
-
- #include <LUFA/Common/Common.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
-
- #include "BluetoothStack.h"
- #include "RFCOMM.h"
-
- /* Macros: */
- #define RFCOMM_SIGNAL_FC (1 << 1)
- #define RFCOMM_SIGNAL_RTC (1 << 2)
- #define RFCOMM_SIGNAL_RTR (1 << 3)
- #define RFCOMM_SIGNAL_IC (1 << 6)
- #define RFCOMM_SIGNAL_DV (1 << 7)
-
- #define RFCOMM_CONFIG_REMOTESIGNALS (1 << 0)
- #define RFCOMM_CONFIG_LOCALSIGNALS (1 << 1)
- #define RFCOMM_CONFIG_LOCALSIGNALSSENT (1 << 2)
- #define RFCOMM_CONFIG_ABMMODESET (1 << 3)
-
- /* Enums: */
- enum RFCOMM_Control_Commands_t
- {
- RFCOMM_Control_Test = (0x20 >> 2),
- RFCOMM_Control_FlowControlEnable = (0xA0 >> 2),
- RFCOMM_Control_FlowControlDisable = (0x60 >> 2),
- RFCOMM_Control_ModemStatus = (0xE0 >> 2),
- RFCOMM_Control_RemotePortNegotiation = (0x90 >> 2),
- RFCOMM_Control_RemoteLineStatus = (0x50 >> 2),
- RFCOMM_Control_DLCParameterNegotiation = (0x80 >> 2),
- RFCOMM_Control_NonSupportedCommand = (0x10 >> 2),
- };
-
- /* Type Defines: */
- typedef struct
- {
- unsigned EA : 1;
- unsigned CR : 1;
- unsigned DLCI : 6;
- } RFCOMM_Address_t;
-
- typedef struct
- {
- RFCOMM_Address_t Address;
- uint8_t Control;
- } RFCOMM_Header_t;
-
- typedef struct
- {
- unsigned EA : 1;
- unsigned CR : 1;
- unsigned Command : 6;
- } RFCOMM_Command_t;
-
- typedef struct
- {
- uint8_t DLCI;
- unsigned FrameType : 4;
- unsigned ConvergenceLayer : 4;
- uint8_t Priority;
- uint8_t ACKTimerTicks;
- uint16_t MaximumFrameSize;
- uint8_t MaxRetransmissions;
- uint8_t RecoveryWindowSize;
- } RFCOMM_DPN_Parameters_t;
-
- typedef struct
- {
- RFCOMM_Address_t Channel;
- uint8_t Signals;
- uint8_t BreakSignal;
- } RFCOMM_MSC_Parameters_t;
-
- /* Function Prototypes: */
- void RFCOMM_ProcessControlCommand(const uint8_t* Command,
- Bluetooth_Channel_t* const Channel);
-
- #if defined(INCLUDE_FROM_RFCOMM_CONTROL_C)
- static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t CommandDataLen,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessFCECommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessFCDCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t CommandDataLen,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessRPNCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessRLSCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- static void RFCOMM_ProcessDPNCommand(const RFCOMM_Command_t* const CommandHeader,
- const uint8_t* CommandData,
- Bluetooth_Channel_t* const ACLChannel);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * SDP layer module. This module implements a simple Service Discovery
- * Protocol server, which can broadcast the device's supported services
- * to other Bluetooth devices upon request, so that they can determine
- * what services are available.
- */
-
-/*
- TODO: Honor remote device's buffer size constraints via continuation state
- */
-
-#define INCLUDE_FROM_SERVICEDISCOVERYPROTOCOL_C
-#include "SDP.h"
-
-/** Service attribute table list, containing a pointer to each service attribute table the device contains */
-const ServiceAttributeTable_t* SDP_Services_Table[] PROGMEM =
- {
- SerialPort_Attribute_Table,
- };
-
-/** Base UUID value common to all standardized Bluetooth services */
-const UUID_t BaseUUID PROGMEM = {0x00000000, BASE_80BIT_UUID};
-
-/** Main Service Discovery Protocol packet processing routine. This function processes incoming SDP packets from
- * a connected Bluetooth device, and sends back appropriate responses to allow other devices to determine the
- * services the local device exposes.
- *
- * \param[in] Data Incoming packet data containing the SDP request
- * \param[in] Channel ACL channel the request was issued to by the remote device
- */
-void SDP_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel)
-{
- SDP_PDUHeader_t* SDPHeader = (SDP_PDUHeader_t*)Data;
- SDPHeader->ParameterLength = SwapEndian_16(SDPHeader->ParameterLength);
-
- BT_SDP_DEBUG(1, "SDP Packet Received");
- BT_SDP_DEBUG(2, "-- PDU ID: 0x%02X", SDPHeader->PDU);
- BT_SDP_DEBUG(2, "-- Param Length: 0x%04X", SDPHeader->ParameterLength);
-
- /* Dispatch to the correct processing routine for the given SDP packet type */
- switch (SDPHeader->PDU)
- {
- case SDP_PDU_SERVICESEARCHREQUEST:
- SDP_ProcessServiceSearch(SDPHeader, Channel);
- break;
- case SDP_PDU_SERVICEATTRIBUTEREQUEST:
- SDP_ProcessServiceAttribute(SDPHeader, Channel);
- break;
- case SDP_PDU_SERVICESEARCHATTRIBUTEREQUEST:
- SDP_ProcessServiceSearchAttribute(SDPHeader, Channel);
- break;
- }
-}
-
-/** Internal processing routine for SDP Service Search Requests.
- *
- * \param[in] SDPHeader Pointer to the start of the issued SDP request
- * \param[in] Channel Pointer to the Bluetooth channel structure the request was issued to
- */
-static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader,
- Bluetooth_Channel_t* const Channel)
-{
- const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t));
-
- BT_SDP_DEBUG(1, "<< Service Search");
-
- /* Retrieve the list of search UUIDs from the request */
- uint8_t UUIDList[12][UUID_SIZE_BYTES];
- uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter);
- BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs);
-
- /* Retrieve the maximum service record response count from the request */
- uint16_t MaxServiceRecordCount = SDP_ReadData16(&CurrentParameter);
- BT_SDP_DEBUG(2, "-- Max Return Service Count: 0x%04X", MaxServiceRecordCount);
-
- struct
- {
- SDP_PDUHeader_t SDPHeader;
- uint16_t TotalServiceRecordCount;
- uint16_t CurrentServiceRecordCount;
- uint8_t ResponseData[100];
- } ResponsePacket;
-
- uint8_t AddedServiceHandles = 0;
-
- /* Create a pointer to the buffer to indicate the current location for response data to be added */
- void* CurrResponsePos = ResponsePacket.ResponseData;
-
- /* Search through the global service list an item at a time */
- for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++)
- {
- /* Read in a pointer to the current UUID table entry's Attribute table */
- ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]);
-
- if (!(SDP_SearchServiceTable(UUIDList, TotalUUIDs, CurrAttributeTable)))
- continue;
-
- BT_SDP_DEBUG(2, " -- Found search match in table");
-
- /* Retrieve a PROGMEM pointer to the value of the service's record handle */
- const void* AttributeValue = SDP_GetAttributeValue(CurrAttributeTable, SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE);
-
- /* Copy over the service record handle to the response list */
- uint8_t AttrHeaderSize;
- uint8_t AttrSize = SDP_GetLocalAttributeContainerSize(AttributeValue, &AttrHeaderSize);
- memcpy_P(CurrResponsePos, AttributeValue + AttrHeaderSize, AttrSize);
- CurrResponsePos += AttrHeaderSize + AttrSize;
-
- AddedServiceHandles++;
- }
-
- /* Continuation state - always zero */
- SDP_WriteData8(&CurrResponsePos, 0);
-
- /* Fill out the service record count values in the returned packet */
- ResponsePacket.TotalServiceRecordCount = SwapEndian_16(AddedServiceHandles);
- ResponsePacket.CurrentServiceRecordCount = ResponsePacket.TotalServiceRecordCount;
-
- /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created service
- handle list and the SDP continuation state */
- uint16_t ParamLength = (ResponsePacket.CurrentServiceRecordCount << 2) +
- sizeof(ResponsePacket.CurrentServiceRecordCount) +
- sizeof(ResponsePacket.TotalServiceRecordCount) +
- sizeof(uint8_t);
-
- /* Fill in the response packet's header */
- ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICESEARCHRESPONSE;
- ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID;
- ResponsePacket.SDPHeader.ParameterLength = SwapEndian_16(ParamLength);
-
- BT_SDP_DEBUG(1, ">> Service Search Response");
-
- /* Send the completed response packet to the sender */
- Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket.SDPHeader) + ParamLength), Channel);
-}
-
-/** Internal processing routine for SDP Service Attribute Requests.
- *
- * \param[in] SDPHeader Pointer to the start of the issued SDP request
- * \param[in] Channel Pointer to the Bluetooth channel structure the request was issued to
- */
-static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader,
- Bluetooth_Channel_t* const Channel)
-{
- const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t));
-
- BT_SDP_DEBUG(1, "<< Service Attribute");
-
- /* Retrieve the service handle whose attributes are to be examined */
- uint32_t ServiceHandle = SDP_ReadData32(&CurrentParameter);
- BT_SDP_DEBUG(2, "-- Service Handle: 0x%08lX", ServiceHandle);
-
- /* Retrieve the maximum Attribute response size from the request */
- uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter);
- BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize);
-
- /* Retrieve the list of Attributes from the request */
- uint16_t AttributeList[8][2];
- uint8_t TotalAttributes = SDP_GetAttributeList(AttributeList, &CurrentParameter);
- BT_SDP_DEBUG(2, "-- Total Attributes: %d", TotalAttributes);
-
- struct
- {
- SDP_PDUHeader_t SDPHeader;
- uint16_t AttributeListByteCount;
- uint8_t ResponseData[100];
- } ResponsePacket;
-
- /* Create a pointer to the buffer to indicate the current location for response data to be added */
- void* CurrResponsePos = ResponsePacket.ResponseData;
-
- /* Clamp the maximum attribute size to the size of the allocated buffer */
- if (MaxAttributeSize > sizeof(ResponsePacket.ResponseData))
- MaxAttributeSize = sizeof(ResponsePacket.ResponseData);
-
- uint16_t TotalResponseSize = 0;
-
- /* Search through the global UUID list an item at a time */
- for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++)
- {
- /* Read in a pointer to the current UUID table entry's Attribute table */
- ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]);
-
- /* Retrieve a PROGMEM pointer to the value of the Service Record Handle */
- const void* ServiceRecord = SDP_GetAttributeValue(CurrAttributeTable, SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE);
-
- /* Get the size of the header for the Service Record Handle */
- uint8_t AttrHeaderSize;
- SDP_GetLocalAttributeContainerSize(ServiceRecord, &AttrHeaderSize);
-
- /* Retrieve the endian-swapped service handle of the current service being examined */
- uint32_t CurrServiceHandle = SwapEndian_32(pgm_read_dword(ServiceRecord + AttrHeaderSize));
-
- /* Check if the current service in the service table has the requested service handle */
- if (ServiceHandle == CurrServiceHandle)
- {
- /* Add the listed attributes for the found UUID to the response */
- TotalResponseSize = SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes,
- &CurrResponsePos);
-
- /* Requested service found, abort the search through the service table */
- break;
- }
- }
-
- /* Continuation state - always zero */
- SDP_WriteData8(&CurrResponsePos, 0);
-
- /* Set the total response list size to the size of the outer container plus its header size and continuation state */
- ResponsePacket.AttributeListByteCount = SwapEndian_16(TotalResponseSize);
-
- /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created attribute
- value list and the SDP continuation state */
- uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) + TotalResponseSize + sizeof(uint8_t));
-
- /* Fill in the response packet's header */
- ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICEATTRIBUTERESPONSE;
- ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID;
- ResponsePacket.SDPHeader.ParameterLength = SwapEndian_16(ParamLength);
-
- BT_SDP_DEBUG(1, ">> Service Attribute Response");
- BT_SDP_DEBUG(2, "-- Param Len 0x%04X", ParamLength);
-
- /* Send the completed response packet to the sender */
- Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket.SDPHeader) + ParamLength), Channel);
-}
-
-/** Internal processing routine for SDP Service Search Attribute Requests.
- *
- * \param[in] SDPHeader Pointer to the start of the issued SDP request
- * \param[in] Channel Pointer to the Bluetooth channel structure the request was issued to
- */
-static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHeader,
- Bluetooth_Channel_t* const Channel)
-{
- const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t));
-
- BT_SDP_DEBUG(1, "<< Service Search Attribute");
-
- /* Retrieve the list of search UUIDs from the request */
- uint8_t UUIDList[12][UUID_SIZE_BYTES];
- uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter);
- BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs);
-
- /* Retrieve the maximum Attribute response size from the request */
- uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter);
- BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize);
-
- /* Retrieve the list of Attributes from the request */
- uint16_t AttributeList[8][2];
- uint8_t TotalAttributes = SDP_GetAttributeList(AttributeList, &CurrentParameter);
- BT_SDP_DEBUG(2, "-- Total Attributes: %d", TotalAttributes);
-
- struct
- {
- SDP_PDUHeader_t SDPHeader;
- uint16_t AttributeListByteCount;
- uint8_t ResponseData[100];
- } ResponsePacket;
-
- /* Create a pointer to the buffer to indicate the current location for response data to be added */
- void* CurrResponsePos = ResponsePacket.ResponseData;
-
- /* Clamp the maximum attribute size to the size of the allocated buffer */
- if (MaxAttributeSize > sizeof(ResponsePacket.ResponseData))
- MaxAttributeSize = sizeof(ResponsePacket.ResponseData);
-
- /* Add the outer Data Element Sequence header for all of the retrieved Attributes */
- uint16_t* TotalResponseSize = SDP_AddSequence16(&CurrResponsePos);
-
- /* Search through the global service list an item at a time */
- for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++)
- {
- /* Read in a pointer to the current UUID table entry's Attribute table */
- ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]);
-
- if (!(SDP_SearchServiceTable(UUIDList, TotalUUIDs, CurrAttributeTable)))
- continue;
-
- BT_SDP_DEBUG(2, " -- Found search match in table");
-
- /* Add the listed attributes for the found UUID to the response */
- *TotalResponseSize += SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes,
- &CurrResponsePos);
- }
-
- /* Continuation state - always zero */
- SDP_WriteData8(&CurrResponsePos, 0);
-
- /* Set the total response list size to the size of the outer container plus its header size and continuation state */
- ResponsePacket.AttributeListByteCount = SwapEndian_16(3 + *TotalResponseSize);
-
- /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created attribute
- value list and the SDP continuation state */
- uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) +
- (3 + *TotalResponseSize) +
- sizeof(uint8_t));
-
- /* Flip the endianness of the container's size */
- *TotalResponseSize = SwapEndian_16(*TotalResponseSize);
-
- /* Fill in the response packet's header */
- ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICESEARCHATTRIBUTERESPONSE;
- ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID;
- ResponsePacket.SDPHeader.ParameterLength = SwapEndian_16(ParamLength);
-
- BT_SDP_DEBUG(1, ">> Service Search Attribute Response");
- BT_SDP_DEBUG(2, "-- Param Len 0x%04X", ParamLength);
-
- /* Send the completed response packet to the sender */
- Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket.SDPHeader) + ParamLength), Channel);
-}
-
-/** Adds all the Attributes in the given service table to the response that appear in the Attribute table.
- *
- * \param[in] AttributeTable Pointer to an Attribute table for the service to examine
- * \param[in] AttributeList Pointer to a list of Attribute ranges
- * \param[in] TotalAttributes Number of Attributes stored in the Attribute list
- * \param[out] BufferPos Pointer to the output buffer position where the retrieved attributes are to be stored
- *
- * \return Number of bytes added to the output buffer
- */
-static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* AttributeTable,
- uint16_t AttributeList[][2],
- const uint8_t TotalAttributes,
- void** const BufferPos)
-{
- uint16_t TotalResponseSize;
-
- /* Add an inner Data Element Sequence header for the current services's found Attributes */
- uint16_t* AttributeListSize = SDP_AddSequence16(BufferPos);
-
- /* Search through the list of Attributes one at a time looking for values in the current UUID's Attribute table */
- for (uint8_t CurrAttribute = 0; CurrAttribute < TotalAttributes; CurrAttribute++)
- {
- uint16_t* AttributeIDRange = AttributeList[CurrAttribute];
- void* AttributeValue;
-
- /* Look through the current service's attribute list, examining all the attributes */
- while ((AttributeValue = pgm_read_ptr(&AttributeTable->Data)) != NULL)
- {
- /* Get the current Attribute's ID from the current attribute table entry */
- uint16_t CurrAttributeID = pgm_read_word(&AttributeTable->AttributeID);
-
- /* Check if the current Attribute's ID is within the current Attribute range */
- if ((CurrAttributeID >= AttributeIDRange[0]) && (CurrAttributeID <= AttributeIDRange[1]))
- {
- /* Increment the current UUID's returned Attribute container size by the number of added bytes */
- *AttributeListSize += SDP_AddAttributeToResponse(CurrAttributeID, AttributeValue, BufferPos);
- }
-
- AttributeTable++;
- }
- }
-
- /* Record the total number of added bytes to the buffer */
- TotalResponseSize = 3 + *AttributeListSize;
-
- /* Fix endianness of the added attribute data element sequence */
- *AttributeListSize = SwapEndian_16(*AttributeListSize);
-
- return TotalResponseSize;
-}
-
-/** Adds the given attribute ID and value to the response buffer, and advances the response buffer pointer past the added data.
- *
- * \param[in] AttributeID Attribute ID to add to the response buffer
- * \param[in] AttributeValue Pointer to the start of the Attribute's value, located in PROGMEM
- * \param[in, out] ResponseBuffer Pointer to a buffer where the Attribute and Attribute Value is to be added
- *
- * \return Number of bytes added to the response buffer
- */
-static uint16_t SDP_AddAttributeToResponse(const uint16_t AttributeID,
- const void* AttributeValue,
- void** ResponseBuffer)
-{
- /* Retrieve the size of the attribute value from its container header */
- uint8_t AttributeHeaderLength;
- uint16_t AttributeValueLength = SDP_GetLocalAttributeContainerSize(AttributeValue, &AttributeHeaderLength);
-
- BT_SDP_DEBUG(2, " -- Add Attribute (0x%04X) 0x%04X", (AttributeHeaderLength + AttributeValueLength), AttributeID);
-
- /* Add a Data Element header to the response for the Attribute ID */
- SDP_WriteData8(ResponseBuffer, (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit));
-
- /* Add the Attribute ID to the created Data Element */
- SDP_WriteData16(ResponseBuffer, AttributeID);
-
- /* Copy over the Attribute value Data Element container to the response */
- memcpy_P(*ResponseBuffer, AttributeValue, AttributeHeaderLength + AttributeValueLength);
- *ResponseBuffer += AttributeHeaderLength + AttributeValueLength;
-
- return (sizeof(uint8_t) + sizeof(uint16_t) + AttributeHeaderLength + AttributeValueLength);
-}
-
-/** Retrieves a pointer to the value of the given Attribute ID from the given Attribute table.
- *
- * \param[in] AttributeTable Pointer to the Attribute table to search in
- * \param[in] AttributeID Attribute ID to search for within the table
- *
- * \return Pointer to the start of the Attribute's value if found within the table, NULL otherwise
- */
-static void* SDP_GetAttributeValue(const ServiceAttributeTable_t* AttributeTable,
- const uint16_t AttributeID)
-{
- void* CurrTableItemData;
-
- /* Search through the current Attribute table, abort when the terminator item has been reached */
- while ((CurrTableItemData = pgm_read_ptr(&AttributeTable->Data)) != NULL)
- {
- /* Check if the current Attribute ID matches the search ID - if so return a pointer to it */
- if (pgm_read_word(&AttributeTable->AttributeID) == AttributeID)
- return CurrTableItemData;
-
- AttributeTable++;
- }
-
- return NULL;
-}
-
-/** Retrieves the Attribute table for the given UUID list if it exists.
- *
- * \param[in] UUIDList List of UUIDs which must be matched within the service attribute table
- * \param[in] TotalUUIDs Total number of UUIDs stored in the UUID list
- * \param[in] CurrAttributeTable Pointer to the service attribute table to search through
- *
- * \return True if all the UUIDs given in the UUID list appear in the given attribute table, false otherwise
- */
-static bool SDP_SearchServiceTable(uint8_t UUIDList[][UUID_SIZE_BYTES],
- const uint8_t TotalUUIDs,
- const ServiceAttributeTable_t* CurrAttributeTable)
-{
- const void* CurrAttribute;
- uint16_t UUIDMatchFlags = 0;
-
- /* Search through the current attribute table, checking each attribute value for UUID matches */
- while ((CurrAttribute = pgm_read_ptr(&CurrAttributeTable->Data)) != NULL)
- {
- SDP_CheckUUIDMatch(UUIDList, TotalUUIDs, &UUIDMatchFlags, CurrAttribute);
- CurrAttributeTable++;
- }
-
- /* Determine how many UUID matches in the list we have found */
- uint8_t UUIDMatches;
- for (UUIDMatches = 0; UUIDMatchFlags; UUIDMatches++)
- UUIDMatchFlags &= (UUIDMatchFlags - 1);
-
- /* If all UUIDs have been matched to the current service, return true */
- return (UUIDMatches == TotalUUIDs);
-}
-
-/** Recursively unwraps the given locally stored attribute (in PROGMEM space), searching for UUIDs to match against
- * the given UUID list. As matches are found, they are indicated in the UUIDMatch flag list.
- *
- * \param[in] UUIDList List of UUIDs which must be matched within the service attribute table
- * \param[in] TotalUUIDs Total number of UUIDs stored in the UUID list
- * \param[in, out] UUIDMatchFlags Array of flags indicating which UUIDs in the list have already been matched
- * \param[in] CurrAttribute Pointer to the current attribute to search through
- *
- * \return True if all the UUIDs given in the UUID list appear in the given attribute table, false otherwise
- */
-static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES],
- const uint8_t TotalUUIDs,
- uint16_t* const UUIDMatchFlags,
- const void* CurrAttribute)
-{
- uint8_t CurrAttributeType = (pgm_read_byte(CurrAttribute) & ~0x07);
-
- /* Check the data type of the current attribute value - if UUID, compare, if Sequence, unwrap and recurse */
- if (CurrAttributeType == SDP_DATATYPE_UUID)
- {
- uint16_t CurrUUIDMatchMask = (1 << 0);
-
- /* Look for matches in the UUID list against the current attribute UUID value */
- for (uint8_t i = 0; i < TotalUUIDs; i++)
- {
- /* Check if the current unmatched UUID is identical to the search UUID */
- if (!(*UUIDMatchFlags & CurrUUIDMatchMask) && !(memcmp_P(UUIDList[i], (CurrAttribute + 1), UUID_SIZE_BYTES)))
- {
- /* Indicate match found for the current attribute UUID and early-abort */
- *UUIDMatchFlags |= CurrUUIDMatchMask;
- break;
- }
-
- CurrUUIDMatchMask <<= 1;
- }
- }
- else if (CurrAttributeType == SDP_DATATYPE_Sequence)
- {
- uint8_t SequenceHeaderSize;
- uint16_t SequenceSize = SDP_GetLocalAttributeContainerSize(CurrAttribute, &SequenceHeaderSize);
-
- CurrAttribute += SequenceHeaderSize;
-
- /* Recursively unwrap the sequence container, and re-search its contents for UUIDs */
- while (SequenceSize)
- {
- uint8_t InnerHeaderSize;
- uint16_t InnerSize = SDP_GetLocalAttributeContainerSize(CurrAttribute, &InnerHeaderSize);
-
- /* Recursively search of the next element in the sequence, trying to match UUIDs with the UUID list */
- SDP_CheckUUIDMatch(UUIDList, TotalUUIDs, UUIDMatchFlags, CurrAttribute);
-
- /* Skip to the next element in the sequence */
- SequenceSize -= InnerHeaderSize + InnerSize;
- CurrAttribute += InnerHeaderSize + InnerSize;
- }
- }
-}
-
-/** Reads in the collection of Attribute ranges from the input buffer's Data Element Sequence container, into the given
- * Attribute list for later use. Once complete, the input buffer pointer is advanced to the end of the Attribute container.
- *
- * \param[out] AttributeList Pointer to a buffer where the list of Attribute ranges are to be stored
- * \param[in] CurrentParameter Pointer to a Buffer containing a Data Element Sequence of Attribute and Attribute Range elements
- *
- * \return Total number of Attribute ranges stored in the Data Element Sequence
- */
-static uint8_t SDP_GetAttributeList(uint16_t AttributeList[][2],
- const void** const CurrentParameter)
-{
- uint8_t ElementHeaderSize;
- uint8_t TotalAttributes = 0;
-
- /* Retrieve the total size of the Attribute container, and unwrap the outer Data Element Sequence container */
- uint16_t AttributeIDListLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize);
- BT_SDP_DEBUG(2, "-- Total Attribute Length: 0x%04X", AttributeIDListLength);
- while (AttributeIDListLength)
- {
- /* Retrieve the size of the next Attribute in the container and get a pointer to the next free Attribute element in the list */
- uint16_t* CurrentAttributeRange = AttributeList[TotalAttributes++];
- uint8_t AttributeLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize);
-
- /* Copy over the starting Attribute ID and (if it the current element is a range) the ending Attribute ID */
- memcpy(&CurrentAttributeRange[0], *CurrentParameter, AttributeLength);
-
- /* If the element is not an Attribute Range, copy over the starting ID to the ending ID to make a range of 1 */
- if (AttributeLength == 2)
- CurrentAttributeRange[1] = CurrentAttributeRange[0];
-
- /* Swap the endianness of the attribute range values */
- CurrentAttributeRange[0] = SwapEndian_16(CurrentAttributeRange[0]);
- CurrentAttributeRange[1] = SwapEndian_16(CurrentAttributeRange[1]);
-
- BT_SDP_DEBUG(2, "-- Attribute: 0x%04X-0x%04X", CurrentAttributeRange[0], CurrentAttributeRange[1]);
-
- AttributeIDListLength -= (AttributeLength + ElementHeaderSize);
- *CurrentParameter += AttributeLength;
- }
-
- return TotalAttributes;
-}
-
-/** Reads in the collection of UUIDs from the input buffer's Data Element Sequence container, into the given
- * UUID list for later use. Once complete, the input buffer pointer is advanced to the end of the UUID container.
- *
- * \param[out] UUIDList Pointer to a buffer where the list of UUIDs are to be stored
- * \param[in] CurrentParameter Pointer to a Buffer containing a Data Element Sequence of UUID elements
- *
- * \return Total number of UUIDs stored in the Data Element Sequence
- */
-static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES],
- const void** const CurrentParameter)
-{
- uint8_t ElementHeaderSize;
- uint8_t TotalUUIDs = 0;
-
- /* Retrieve the total size of the UUID container, and unwrap the outer Data Element Sequence container */
- uint16_t ServicePatternLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize);
- BT_SDP_DEBUG(2, "-- Total UUID Length: 0x%04X", ServicePatternLength);
- while (ServicePatternLength)
- {
- /* Retrieve the size of the next UUID in the container and get a pointer to the next free UUID element in the list */
- uint8_t* CurrentUUID = UUIDList[TotalUUIDs++];
- uint8_t UUIDLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize);
-
- /* Copy over UUID from the container to the free slot */
- if (UUIDLength <= 4)
- {
- /* Copy over the base UUID value to the free UUID slot in the list */
- memcpy_P(CurrentUUID, &BaseUUID, sizeof(BaseUUID));
-
- /* Copy over short UUID */
- memcpy(CurrentUUID + (4 - UUIDLength), *CurrentParameter, UUIDLength);
- }
- else
- {
- /* Copy over full UUID */
- memcpy(CurrentUUID, *CurrentParameter, UUIDLength);
- }
-
- BT_SDP_DEBUG(2, "-- UUID (%d): %02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X",
- UUIDLength,
- CurrentUUID[0], CurrentUUID[1], CurrentUUID[2], CurrentUUID[3],
- CurrentUUID[4], CurrentUUID[5],
- CurrentUUID[6], CurrentUUID[7],
- CurrentUUID[8], CurrentUUID[9],
- CurrentUUID[10], CurrentUUID[11], CurrentUUID[12], CurrentUUID[13], CurrentUUID[14], CurrentUUID[15]);
-
- ServicePatternLength -= (UUIDLength + ElementHeaderSize);
- *CurrentParameter += UUIDLength;
- }
-
- return TotalUUIDs;
-}
-
-/** Retrieves the total size of the given locally stored (in PROGMEM) attribute Data Element container.
- *
- * \param[in] AttributeData Pointer to the start of the Attribute container, located in PROGMEM
- * \param[out] HeaderSize Pointer to a location where the header size of the data element is to be stored
- *
- * \return Size in bytes of the entire attribute container, including the header
- */
-static uint32_t SDP_GetLocalAttributeContainerSize(const void* const AttributeData,
- uint8_t* const HeaderSize)
-{
- /* Fetch the size of the Data Element structure from the header */
- uint8_t SizeIndex = (pgm_read_byte(AttributeData) & 0x07);
-
- uint32_t ElementValueSize;
-
- /* Convert the Data Element size index into a size in bytes */
- switch (SizeIndex)
- {
- case SDP_DATASIZE_Variable8Bit:
- *HeaderSize = (1 + sizeof(uint8_t));
- ElementValueSize = pgm_read_byte(AttributeData + 1);
- break;
- case SDP_DATASIZE_Variable16Bit:
- *HeaderSize = (1 + sizeof(uint16_t));
- ElementValueSize = SwapEndian_16(pgm_read_word(AttributeData + 1));
- break;
- case SDP_DATASIZE_Variable32Bit:
- *HeaderSize = (1 + sizeof(uint32_t));
- ElementValueSize = SwapEndian_32(pgm_read_dword(AttributeData + 1));
- break;
- default:
- *HeaderSize = 1;
- ElementValueSize = (1 << SizeIndex);
- break;
- }
-
- return ElementValueSize;
-}
-
-/** Retrieves the size of a Data Element container from the current input buffer, and advances the input buffer
- * pointer to the start of the Data Element's contents.
- *
- * \param[in, out] DataElementHeader Pointer to the start of a Data Element header
- * \param[out] ElementHeaderSize Size in bytes of the header that was skipped
- *
- * \return Size in bytes of the Data Element container's contents, minus the header
- */
-static uint32_t SDP_GetDataElementSize(const void** const DataElementHeader,
- uint8_t* const ElementHeaderSize)
-{
- /* Fetch the size of the Data Element structure from the header, increment the current buffer pos */
- uint8_t SizeIndex = (SDP_ReadData8(DataElementHeader) & 0x07);
-
- uint32_t ElementValueSize;
-
- /* Convert the Data Element size index into a size in bytes */
- switch (SizeIndex)
- {
- case SDP_DATASIZE_Variable8Bit:
- *ElementHeaderSize = (1 + sizeof(uint8_t));
- ElementValueSize = SDP_ReadData8(DataElementHeader);
- break;
- case SDP_DATASIZE_Variable16Bit:
- *ElementHeaderSize = (1 + sizeof(uint16_t));
- ElementValueSize = SDP_ReadData16(DataElementHeader);
- break;
- case SDP_DATASIZE_Variable32Bit:
- *ElementHeaderSize = (1 + sizeof(uint32_t));
- ElementValueSize = SDP_ReadData32(DataElementHeader);
- break;
- default:
- *ElementHeaderSize = 1;
- ElementValueSize = (1 << SizeIndex);
- break;
- }
-
- return ElementValueSize;
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for ServiceDiscoveryProtocol.c.
- */
-
-#ifndef _SERVICEDISCOVERYPROTOCOL_H_
-#define _SERVICEDISCOVERYPROTOCOL_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/pgmspace.h>
- #include <string.h>
- #include <stdbool.h>
- #include <stdio.h>
-
- #include <LUFA/Common/Common.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
-
- #include "BluetoothStack.h"
- #include "SDPServices.h"
-
- /* Macros: */
- #define BT_SDP_DEBUG(l, s, ...) do { if (SDP_DEBUG_LEVEL >= l) printf_P(PSTR("(SDP) " s "\r\n"), ##__VA_ARGS__); } while (0)
- #define SDP_DEBUG_LEVEL 0
-
- #define SDP_PDU_ERRORRESPONSE 0x01
- #define SDP_PDU_SERVICESEARCHREQUEST 0x02
- #define SDP_PDU_SERVICESEARCHRESPONSE 0x03
- #define SDP_PDU_SERVICEATTRIBUTEREQUEST 0x04
- #define SDP_PDU_SERVICEATTRIBUTERESPONSE 0x05
- #define SDP_PDU_SERVICESEARCHATTRIBUTEREQUEST 0x06
- #define SDP_PDU_SERVICESEARCHATTRIBUTERESPONSE 0x07
-
- /* Enums: */
- /** Data sizes for SDP Data Element headers, to indicate the size of the data contained in the element. When creating
- * a Data Element, a value from this enum should be ORed with a value from the \ref ServiceDiscovery_DataTypes_t enum.
- */
- enum ServiceDiscovery_DataSizes_t
- {
- SDP_DATASIZE_8Bit = 0, /**< Contained data is 8 bits in length. */
- SDP_DATASIZE_16Bit = 1, /**< Contained data is 16 bits in length. */
- SDP_DATASIZE_32Bit = 2, /**< Contained data is 32 bits in length. */
- SDP_DATASIZE_64Bit = 3, /**< Contained data is 64 bits in length. */
- SDP_DATASIZE_128Bit = 4, /**< Contained data is 128 bits in length. */
- SDP_DATASIZE_Variable8Bit = 5, /**< Contained data is encoded in an 8 bit size integer following the header. */
- SDP_DATASIZE_Variable16Bit = 6, /**< Contained data is encoded in an 16 bit size integer following the header. */
- SDP_DATASIZE_Variable32Bit = 7, /**< Contained data is encoded in an 32 bit size integer following the header. */
- };
-
- /** Data types for SDP Data Element headers, to indicate the type of data contained in the element. When creating
- * a Data Element, a value from this enum should be ORed with a value from the \ref ServiceDiscovery_DataSizes_t enum.
- */
- enum ServiceDiscovery_DataTypes_t
- {
- SDP_DATATYPE_Nill = (0 << 3), /**< Indicates the container data is a Nill (null) type. */
- SDP_DATATYPE_UnsignedInt = (1 << 3), /**< Indicates the container data is an unsigned integer. */
- SDP_DATATYPE_SignedInt = (2 << 3), /**< Indicates the container data is a signed integer. */
- SDP_DATATYPE_UUID = (3 << 3), /**< Indicates the container data is a UUID. */
- SDP_DATATYPE_String = (4 << 3), /**< Indicates the container data is an ASCII string. */
- SDP_DATATYPE_Boolean = (5 << 3), /**< Indicates the container data is a logical boolean. */
- SDP_DATATYPE_Sequence = (6 << 3), /**< Indicates the container data is a sequence of containers. */
- SDP_DATATYPE_Alternative = (7 << 3), /**< Indicates the container data is a sequence of alternative containers. */
- SDP_DATATYPE_URL = (8 << 3), /**< Indicates the container data is a URL. */
- };
-
- /* Type Defines: */
- /** Header for all SPD transaction packets. This header is sent at the start of all SDP packets sent to or from a SDP
- * server.
- */
- typedef struct
- {
- uint8_t PDU; /**< SDP packet type, a \c SDP_PDU_* mask value */
- uint16_t TransactionID; /**< Unique transaction ID number to associate requests and responses */
- uint16_t ParameterLength; /**< Length of the data following the SDP header */
- } SDP_PDUHeader_t;
-
- /* Inline Functions: */
- /** Writes 8 bits of raw data to the given buffer, incrementing the buffer position afterwards.
- *
- * \param[in, out] BufferPos Current position in the buffer where the data is to be written to
- * \param[in] Data Data to write to the buffer
- */
- static inline void SDP_WriteData8(void** BufferPos,
- const uint8_t Data)
- {
- *((uint8_t*)*BufferPos) = Data;
- *BufferPos += sizeof(uint8_t);
- }
-
- /** Writes 16 bits of raw data to the given buffer, incrementing the buffer position afterwards.
- *
- * \param[in, out] BufferPos Current position in the buffer where the data is to be written to
- * \param[in] Data Data to write to the buffer
- */
- static inline void SDP_WriteData16(void** BufferPos,
- const uint16_t Data)
- {
- *((uint16_t*)*BufferPos) = SwapEndian_16(Data);
- *BufferPos += sizeof(uint16_t);
- }
-
- /** Writes 32 bits of raw data to the given buffer, incrementing the buffer position afterwards.
- *
- * \param[in, out] BufferPos Current position in the buffer where the data is to be written to
- * \param[in] Data Data to write to the buffer
- */
- static inline void SDP_WriteData32(void** BufferPos,
- const uint32_t Data)
- {
- *((uint32_t*)*BufferPos) = SwapEndian_32(Data);
- *BufferPos += sizeof(uint32_t);
- }
-
- /** Reads 8 bits of raw data from the given buffer, incrementing the buffer position afterwards.
- *
- * \param[in, out] BufferPos Current position in the buffer where the data is to be read from
- *
- * \return Data read from the buffer
- */
- static inline uint8_t SDP_ReadData8(const void** BufferPos)
- {
- uint8_t Data = *((const uint8_t*)*BufferPos);
- *BufferPos += sizeof(uint8_t);
-
- return Data;
- }
-
- /** Reads 16 bits of raw data from the given buffer, incrementing the buffer position afterwards.
- *
- * \param[in, out] BufferPos Current position in the buffer where the data is to be read from
- *
- * \return Data read from the buffer
- */
- static inline uint16_t SDP_ReadData16(const void** BufferPos)
- {
- uint16_t Data = SwapEndian_16(*((const uint16_t*)*BufferPos));
- *BufferPos += sizeof(uint16_t);
-
- return Data;
- }
-
- /** Reads 32 bits of raw data from the given buffer, incrementing the buffer position afterwards.
- *
- * \param[in, out] BufferPos Current position in the buffer where the data is to be read from
- *
- * \return Data read from the buffer
- */
- static inline uint32_t SDP_ReadData32(const void** BufferPos)
- {
- uint32_t Data = SwapEndian_32(*((const uint32_t*)*BufferPos));
- *BufferPos += sizeof(uint32_t);
-
- return Data;
- }
-
- /** Adds a new Data Element Sequence container with a 16-bit size header to the buffer. The buffer
- * pointer's position is advanced past the added header once the element has been added. The returned
- * size header value is pre-zeroed out so that it can be incremented as data is placed into the Data
- * Element Sequence container.
- *
- * The total added size of the container header is three bytes, regardless of the size of its contents
- * as long as the contents' size in bytes fits into a 16-bit integer.
- *
- * \param[in, out] BufferPos Pointer to a buffer where the container header is to be placed
- *
- * \return Pointer to the 16-bit size value of the container header, which has been pre-zeroed
- */
- static inline uint16_t* SDP_AddSequence16(void** BufferPos)
- {
- SDP_WriteData8(BufferPos, (SDP_DATASIZE_Variable16Bit | SDP_DATATYPE_Sequence));
-
- uint16_t* SizePos = *BufferPos;
- SDP_WriteData16(BufferPos, 0);
-
- return SizePos;
- }
-
- /* Function Prototypes: */
- void SDP_ProcessPacket(void* Data,
- Bluetooth_Channel_t* const Channel);
-
- #if defined(INCLUDE_FROM_SERVICEDISCOVERYPROTOCOL_C)
- static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader,
- Bluetooth_Channel_t* const Channel);
- static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader,
- Bluetooth_Channel_t* const Channel);
- static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHeader,
- Bluetooth_Channel_t* const Channel);
-
- static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* AttributeTable,
- uint16_t AttributeList[][2],
- const uint8_t TotalAttributes,
- void** const BufferPos);
- static uint16_t SDP_AddAttributeToResponse(const uint16_t AttributeID,
- const void* AttributeValue,
- void** ResponseBuffer);
- static void* SDP_GetAttributeValue(const ServiceAttributeTable_t* AttributeTable,
- const uint16_t AttributeID);
-
- static bool SDP_SearchServiceTable(uint8_t UUIDList[][UUID_SIZE_BYTES],
- const uint8_t TotalUUIDs,
- const ServiceAttributeTable_t* CurrAttributeTable);
- static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES],
- const uint8_t TotalUUIDs,
- uint16_t* const UUIDMatchFlags,
- const void* CurrAttribute);
-
- static uint8_t SDP_GetAttributeList(uint16_t AttributeList[][2],
- const void** const CurrentParameter);
- static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES],
- const void** const CurrentParameter);
-
- static uint32_t SDP_GetLocalAttributeContainerSize(const void* const AttributeData,
- uint8_t* const HeaderSize);
- static uint32_t SDP_GetDataElementSize(const void** const AttributeHeader,
- uint8_t* const ElementHeaderSize);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * SDP Service Attribute definitions. This file contains the attributes
- * and attribute tables of all the services the device supports, which can
- * then be retrieved by a connected Bluetooth device via the SDP server.
- */
-
-#include "SDPServices.h"
-
-/** Serial Port Profile attribute, listing the unique service handle of the Serial Port service
- * within the device. This handle can then be requested by the SDP client in future transactions
- * in lieu of a search UUID list.
- */
-const struct
-{
- uint8_t Header;
- uint32_t Data;
-} PROGMEM SerialPort_Attribute_ServiceHandle =
- {
- (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_32Bit),
- SWAPENDIAN_32(0x00010001),
- };
-
-/** Serial Port Profile attribute, listing the implemented Service Class UUIDs of the Serial Port service
- * within the device. This list indicates all the class UUIDs that apply to the Serial Port service, so that
- * a SDP client can search by a generalized class rather than a specific UUID to determine supported services.
- */
-const struct
-{
- uint8_t Header;
- uint8_t Size;
- ItemUUID_t UUIDList[];
-} PROGMEM SerialPort_Attribute_ServiceClassIDs =
- {
- (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit),
- (sizeof(ItemUUID_t) * 1),
- {
- {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), SP_CLASS_UUID},
- },
- };
-
-/** Serial Port Profile attribute, listing the Protocols (and their attributes) of the Serial Port service
- * within the device. This list indicates what protocols the service is layered on top of, as well as any
- * configuration information for each layer.
- */
-const struct
-{
- uint8_t Header;
- uint8_t Size;
-
- ItemProtocol_t L2CAP;
- ItemProtocol_8BitParam_t RFCOMM;
-} PROGMEM SerialPort_Attribute_ProtocolDescriptor =
- {
- (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit),
- (sizeof(ItemProtocol_t) + sizeof(ItemProtocol_8BitParam_t)),
- {
- (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit),
- sizeof(ItemUUID_t),
- {
- {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), L2CAP_UUID},
- },
- },
- {
- (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit),
- (sizeof(ItemUUID_t) + sizeof(Item8Bit_t)),
- {
- {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), RFCOMM_UUID},
- {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_8Bit), 0x03},
- },
- },
- };
-
-/** Serial Port Profile attribute, listing the Browse Group List UUIDs which this service is a member of.
- * Browse Group UUIDs give a way to group together services within a device in a simple hierarchy, so that
- * a SDP client can progressively narrow down an general browse to a specific service which it requires.
- */
-const struct
-{
- uint8_t Header;
- uint8_t Size;
- ItemUUID_t UUIDList[];
-} PROGMEM SerialPort_Attribute_BrowseGroupList =
- {
- (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit),
- (sizeof(ItemUUID_t) * 1),
- {
- {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), PUBLICBROWSEGROUP_CLASS_UUID},
- },
- };
-
-/** Serial Port Profile attribute, listing the languages (and their encodings) supported
- * by the Serial Port service in its text string attributes.
- */
-const struct
-{
- uint8_t Header;
- uint8_t Size;
- ItemLangEncoding_t LanguageEncodings[];
-} PROGMEM SerialPort_Attribute_LanguageBaseIDOffset =
- {
- (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit),
- (sizeof(ItemLangEncoding_t) * 1),
- {
- {
- {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit), SWAPENDIAN_16(0x454E)},
- {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit), SWAPENDIAN_16(0x006A)},
- {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit), SWAPENDIAN_16(0x0100)},
- },
- },
- };
-
-/** Serial Port Profile attribute, listing a human readable name of the service. */
-const struct
-{
- uint8_t Header;
- uint8_t Size;
- char Text[];
-} PROGMEM SerialPort_Attribute_ServiceName =
- {
- (SDP_DATATYPE_String | SDP_DATASIZE_Variable8Bit),
- sizeof("Wireless Serial Port") - 1,
- "Wireless Serial Port",
- };
-
-/** Serial Port Profile attribute, listing a human readable description of the service. */
-const struct
-{
- uint8_t Header;
- uint8_t Size;
- char Text[];
-} PROGMEM SerialPort_Attribute_ServiceDescription =
- {
- (SDP_DATATYPE_String | SDP_DATASIZE_Variable8Bit),
- sizeof("Wireless Serial Port Service") - 1,
- "Wireless Serial Port Service",
- };
-
-/** Service Attribute Table for the Serial Port service, linking each supported attribute ID to its data, so that
- * the SDP server can retrieve it for transmission back to a SDP client upon request.
- */
-const ServiceAttributeTable_t PROGMEM SerialPort_Attribute_Table[] =
- {
- {.AttributeID = SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE, .Data = &SerialPort_Attribute_ServiceHandle },
- {.AttributeID = SDP_ATTRIBUTE_ID_SERVICECLASSIDS, .Data = &SerialPort_Attribute_ServiceClassIDs },
- {.AttributeID = SDP_ATTRIBUTE_ID_PROTOCOLDESCRIPTORLIST, .Data = &SerialPort_Attribute_ProtocolDescriptor },
- {.AttributeID = SDP_ATTRIBUTE_ID_BROWSEGROUPLIST, .Data = &SerialPort_Attribute_BrowseGroupList },
- {.AttributeID = SDP_ATTRIBUTE_ID_LANGUAGEBASEATTROFFSET, .Data = &SerialPort_Attribute_LanguageBaseIDOffset},
- {.AttributeID = SDP_ATTRIBUTE_ID_SERVICENAME, .Data = &SerialPort_Attribute_ServiceName },
- {.AttributeID = SDP_ATTRIBUTE_ID_SERVICEDESCRIPTION, .Data = &SerialPort_Attribute_ServiceDescription },
-
- SERVICE_ATTRIBUTE_TABLE_TERMINATOR
- };
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for SDPServices.c.
- */
-
-#ifndef _SDPSERVICES_H_
-#define _SDPSERVICES_H_
-
- /* Includes: */
- #include "SDP.h"
-
- /* Macros: */
- /** Size of a full 128 bit UUID, in bytes. */
- #define UUID_SIZE_BYTES 16
-
- /** First 80 bits common to all standardized Bluetooth services. */
- #define BASE_80BIT_UUID 0x0000, 0x0010, 0x0080, {0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB}
-
- #define RFCOMM_UUID {SWAPENDIAN_32(0x00000003), BASE_80BIT_UUID}
- #define L2CAP_UUID {SWAPENDIAN_32(0x00000100), BASE_80BIT_UUID}
- #define SP_CLASS_UUID {SWAPENDIAN_32(0x00001101), BASE_80BIT_UUID}
- #define PUBLICBROWSEGROUP_CLASS_UUID {SWAPENDIAN_32(0x00001002), BASE_80BIT_UUID}
-
- #define SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE 0x0000
- #define SDP_ATTRIBUTE_ID_SERVICECLASSIDS 0x0001
- #define SDP_ATTRIBUTE_ID_PROTOCOLDESCRIPTORLIST 0x0004
- #define SDP_ATTRIBUTE_ID_BROWSEGROUPLIST 0x0005
- #define SDP_ATTRIBUTE_ID_LANGUAGEBASEATTROFFSET 0x0006
- #define SDP_ATTRIBUTE_ID_SERVICENAME 0x0100
- #define SDP_ATTRIBUTE_ID_SERVICEDESCRIPTION 0x0101
-
- /** Terminator for a service attribute table of type \ref ServiceAttributeTable_t. */
- #define SERVICE_ATTRIBUTE_TABLE_TERMINATOR {.Data = NULL}
-
- /* Type Defines: */
- /** Type define for a UUID value structure. This struct can be used to hold full 128-bit UUIDs. */
- typedef struct
- {
- uint32_t A; /**< Bits 0-31 of the UUID. */
- uint16_t B; /**< Bits 32-47 of the UUID. */
- uint16_t C; /**< Bits 48-63 of the UUID. */
- uint16_t D; /**< Bits 64-79 of the UUID. */
- uint8_t E[6]; /**< Bits 80-127 of the UUID. */
- } UUID_t;
-
- /** Structure for the association of attribute ID values to an attribute value in FLASH. A table of these
- * structures can then be built up for each supported UUID service within the device.
- *
- * \attention This table must be terminated with a \ref SERVICE_ATTRIBUTE_TABLE_TERMINATOR element.
- */
- typedef struct
- {
- uint16_t AttributeID; /**< Attribute ID of the table element which the UUID service supports */
- const void* Data; /**< Pointer to the attribute data, located in PROGMEM memory space */
- } ServiceAttributeTable_t;
-
- /** Structure for a list of Data Elements containing 8-bit integers, for service attributes requiring such lists. */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_8Bit) */
- uint8_t Value; /**< Value to store in the list Data Element */
- } Item8Bit_t;
-
- /** Structure for a list of Data Elements containing 16-bit integers, for service attributes requiring such lists. */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit) */
- uint16_t Value; /**< Value to store in the list Data Element */
- } Item16Bit_t;
-
- /** Structure for a list of Data Elements containing 32-bit integers, for service attributes requiring such lists. */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_32Bit) */
- uint32_t Value; /**< Value to store in the list Data Element */
- } Item32Bit_t;
-
- /** Structure for a list of Data Elements containing UUIDs, for service attributes requiring UUID lists. */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit) */
- UUID_t UUID; /**< UUID to store in the list Data Element */
- } ItemUUID_t;
-
- /** Structure for a list of Data Elements Sequences containing UUID Data Elements, for service attributes requiring
- * protocol lists.
- */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */
- uint8_t Size; /**< Size of the inner Data Element sequence */
-
- struct
- {
- ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */
- } Protocol;
- } ItemProtocol_t;
-
- /** Structure for a list of Data Elements Sequences containing UUID Data Elements and an 8-bit param value, for service
- * attributes requiring extended protocol lists containing an 8-bit value.
- */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */
- uint8_t Size; /**< Size of the inner Data Element sequence */
-
- struct
- {
- ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */
- Item8Bit_t Param; /**< 8-Bit Parameter associated with the service */
- } Protocol;
- } ItemProtocol_8BitParam_t;
-
- /** Structure for a list of Data Elements Sequences containing UUID Data Elements and an 16-bit param value, for service
- * attributes requiring extended protocol lists containing an 16-bit value.
- */
- typedef struct
- {
- uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */
- uint8_t Size; /**< Size of the inner Data Element sequence */
-
- struct
- {
- ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */
- Item16Bit_t Channel; /**< 16-Bit Parameter associated with the service */
- } Protocol;
- } ItemProtocol_16BitParam_t;
-
- /** Structure for a list of Data Elements containing language encodings, including the language ID, Encoding ID and
- * Attribute base offset.
- */
- typedef struct
- {
- Item16Bit_t LanguageID; /**< Language ID for the current language */
- Item16Bit_t EncodingID; /**< Encoding used for the current language */
- Item16Bit_t OffsetID; /**< Attribute offset added to all strings using this language within the service */
- } ItemLangEncoding_t;
-
- /* External Variables: */
- extern const ServiceAttributeTable_t SerialPort_Attribute_Table[];
- extern const ServiceAttributeTable_t PnP_Attribute_Table[];
-
-#endif
-
+++ /dev/null
-# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = USBKEY
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 8000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = BluetoothHost
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../../../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c \
- BluetoothEvents.c \
- DeviceDescriptor.c \
- ConfigDescriptor.c \
- Lib/BluetoothStack.c \
- Lib/BluetoothHCICommands.c \
- Lib/BluetoothACLPackets.c \
- Lib/SDP.c \
- Lib/SDPServices.c \
- Lib/RFCOMM.c \
- Lib/RFCOMMControl.c \
- $(LUFA_SRC_USB) \
- $(LUFA_SRC_SERIAL)
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=c99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += $(LUFA_OPTS)
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
#include "ConfigDescriptor.h"
#include "Lib/AndroidAccessoryCommands.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+ #define HOST_DEVICE_SETTLE_DELAY_MS 0
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D HOST_DEVICE_SETTLE_DELAY_MS=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
/* Create a stdio stream for the serial port for stdin and stdout */
Serial_CreateStream(NULL);
+
+ /* Start the ADC conversion in free running mode */
+ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include "ConfigDescriptor.h"
+ #include "Config/AppConfig.h"
/* Macros: */
- /** ADC channel number for the microphone input. */
- #define MIC_IN_ADC_CHANNEL 2
-
- /** ADC channel MUX mask for the microphone input. */
- #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2
-
/** Maximum audio sample value for the microphone input. */
#define SAMPLE_MAX_RANGE 0xFFFF
* <td><b>Description:</b></td>
* </tr>
* <tr>
+ * <td>MIC_IN_ADC_CHANNEL</td>
+ * <td>AppConfig.h</td>
+ * <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
+ * </tr>
+ * <tr>
* <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
* instead of sampling the board microphone.</td>
* </tr>
* <tr>
* <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
* </tr>
* </table>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define MIC_IN_ADC_CHANNEL 2
+
+ #define MICROPHONE_BIASED_TO_HALF_RAIL
+ #define USE_TEST_TONE
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <LUFA/Drivers/USB/USB.h>
#include "AudioOutputHost.h"
-
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Pipe address for the Audio data OUT pipe. */
#define AUDIO_DATA_OUT_PIPE (PIPE_DIR_OUT | 1)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
-LUFA_OPTS += -D USE_TEST_TONE
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+ #define USB_STREAM_TIMEOUT_MS 5000
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Lib/MassStoreCommands.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=5000
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/power.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "ConfigDescriptor.h"
#include "Lib/PrinterCommands.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/interrupt.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
-<Project name="LUFA"><Folder name="Demos"><Folder name="Device"><Folder name="ClassDriver"><Folder name="AudioInput"><File path="Demos\Device\ClassDriver\AudioInput\AudioInput.c"></File><File path="Demos\Device\ClassDriver\AudioInput\AudioInput.h"></File><File path="Demos\Device\ClassDriver\AudioInput\AudioInput.txt"></File><File path="Demos\Device\ClassDriver\AudioInput\Descriptors.c"></File><File path="Demos\Device\ClassDriver\AudioInput\Descriptors.h"></File><File path="Demos\Device\ClassDriver\AudioInput\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\AudioInput\makefile"></File></Folder><Folder name="AudioOutput"><File path="Demos\Device\ClassDriver\AudioOutput\AudioOutput.c"></File><File path="Demos\Device\ClassDriver\AudioOutput\AudioOutput.h"></File><File path="Demos\Device\ClassDriver\AudioOutput\AudioOutput.txt"></File><File path="Demos\Device\ClassDriver\AudioOutput\Descriptors.c"></File><File path="Demos\Device\ClassDriver\AudioOutput\Descriptors.h"></File><File path="Demos\Device\ClassDriver\AudioOutput\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\AudioOutput\makefile"></File></Folder><Folder name="DualVirtualSerial"><File path="Demos\Device\ClassDriver\DualVirtualSerial\Descriptors.c"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\Descriptors.h"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\DualVirtualSerial.c"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\DualVirtualSerial.h"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\DualVirtualSerial.txt"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\LUFA DualVirtualSerial.inf"></File><File path="Demos\Device\ClassDriver\DualVirtualSerial\makefile"></File></Folder><Folder name="GenericHID"><File path="Demos\Device\ClassDriver\GenericHID\Descriptors.c"></File><File path="Demos\Device\ClassDriver\GenericHID\Descriptors.h"></File><File path="Demos\Device\ClassDriver\GenericHID\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\GenericHID\GenericHID.c"></File><File path="Demos\Device\ClassDriver\GenericHID\GenericHID.h"></File><File path="Demos\Device\ClassDriver\GenericHID\GenericHID.txt"></File><File path="Demos\Device\ClassDriver\GenericHID\makefile"></File></Folder><Folder name="Joystick"><File path="Demos\Device\ClassDriver\Joystick\Descriptors.c"></File><File path="Demos\Device\ClassDriver\Joystick\Descriptors.h"></File><File path="Demos\Device\ClassDriver\Joystick\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\Joystick\Joystick.c"></File><File path="Demos\Device\ClassDriver\Joystick\Joystick.h"></File><File path="Demos\Device\ClassDriver\Joystick\Joystick.txt"></File><File path="Demos\Device\ClassDriver\Joystick\makefile"></File></Folder><Folder name="Keyboard"><File path="Demos\Device\ClassDriver\Keyboard\Descriptors.c"></File><File path="Demos\Device\ClassDriver\Keyboard\Descriptors.h"></File><File path="Demos\Device\ClassDriver\Keyboard\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\Keyboard\Keyboard.c"></File><File path="Demos\Device\ClassDriver\Keyboard\Keyboard.h"></File><File path="Demos\Device\ClassDriver\Keyboard\Keyboard.txt"></File><File path="Demos\Device\ClassDriver\Keyboard\makefile"></File></Folder><Folder name="KeyboardMouse"><File path="Demos\Device\ClassDriver\KeyboardMouse\Descriptors.c"></File><File path="Demos\Device\ClassDriver\KeyboardMouse\Descriptors.h"></File><File path="Demos\Device\ClassDriver\KeyboardMouse\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\KeyboardMouse\KeyboardMouse.c"></File><File path="Demos\Device\ClassDriver\KeyboardMouse\KeyboardMouse.h"></File><File path="Demos\Device\ClassDriver\KeyboardMouse\KeyboardMouse.txt"></File><File path="Demos\Device\ClassDriver\KeyboardMouse\makefile"></File></Folder><Folder name="KeyboardMouseMultiReport"><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Descriptors.c"></File><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Descriptors.h"></File><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\KeyboardMouseMultiReport.c"></File><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\KeyboardMouseMultiReport.h"></File><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\KeyboardMouseMultiReport.txt"></File><File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\makefile"></File></Folder><Folder name="MassStorage"><Folder name="Lib"><File path="Demos\Device\ClassDriver\MassStorage\Lib\DataflashManager.c"></File><File path="Demos\Device\ClassDriver\MassStorage\Lib\DataflashManager.h"></File><File path="Demos\Device\ClassDriver\MassStorage\Lib\SCSI.c"></File><File path="Demos\Device\ClassDriver\MassStorage\Lib\SCSI.h"></File></Folder><File path="Demos\Device\ClassDriver\MassStorage\Descriptors.c"></File><File path="Demos\Device\ClassDriver\MassStorage\Descriptors.h"></File><File path="Demos\Device\ClassDriver\MassStorage\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\MassStorage\makefile"></File><File path="Demos\Device\ClassDriver\MassStorage\MassStorage.c"></File><File path="Demos\Device\ClassDriver\MassStorage\MassStorage.h"></File><File path="Demos\Device\ClassDriver\MassStorage\MassStorage.txt"></File></Folder><Folder name="MassStorageKeyboard"><Folder name="Lib"><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\DataflashManager.c"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\DataflashManager.h"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\SCSI.c"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\SCSI.h"></File></Folder><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Descriptors.c"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Descriptors.h"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\makefile"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\MassStorageKeyboard.c"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\MassStorageKeyboard.h"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\MassStorageKeyboard\MassStorageKeyboard.txt"></File></Folder><Folder name="MIDI"><File path="Demos\Device\ClassDriver\MIDI\Descriptors.c"></File><File path="Demos\Device\ClassDriver\MIDI\Descriptors.h"></File><File path="Demos\Device\ClassDriver\MIDI\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\MIDI\makefile"></File><File path="Demos\Device\ClassDriver\MIDI\MIDI.c"></File><File path="Demos\Device\ClassDriver\MIDI\MIDI.h"></File><File path="Demos\Device\ClassDriver\MIDI\MIDI.txt"></File></Folder><Folder name="Mouse"><File path="Demos\Device\ClassDriver\Mouse\Descriptors.c"></File><File path="Demos\Device\ClassDriver\Mouse\Descriptors.h"></File><File path="Demos\Device\ClassDriver\Mouse\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\Mouse\makefile"></File><File path="Demos\Device\ClassDriver\Mouse\Mouse.c"></File><File path="Demos\Device\ClassDriver\Mouse\Mouse.h"></File><File path="Demos\Device\ClassDriver\Mouse\Mouse.txt"></File></Folder><Folder name="RNDISEthernet"><Folder name="Lib"><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Webserver.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ARP.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ARP.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\DHCP.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\DHCP.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Ethernet.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Ethernet.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\EthernetProtocols.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ICMP.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ICMP.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\IP.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\IP.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ProtocolDecoders.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ProtocolDecoders.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\TCP.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\TCP.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\UDP.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\UDP.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Webserver.c"></File></Folder><File path="Demos\Device\ClassDriver\RNDISEthernet\Descriptors.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Descriptors.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\LUFA RNDIS.inf"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\makefile"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\RNDISEthernet.c"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\RNDISEthernet.h"></File><File path="Demos\Device\ClassDriver\RNDISEthernet\RNDISEthernet.txt"></File></Folder><Folder name="VirtualSerial"><File path="Demos\Device\ClassDriver\VirtualSerial\Descriptors.c"></File><File path="Demos\Device\ClassDriver\VirtualSerial\Descriptors.h"></File><File path="Demos\Device\ClassDriver\VirtualSerial\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\VirtualSerial\LUFA VirtualSerial.inf"></File><File path="Demos\Device\ClassDriver\VirtualSerial\makefile"></File><File path="Demos\Device\ClassDriver\VirtualSerial\VirtualSerial.c"></File><File path="Demos\Device\ClassDriver\VirtualSerial\VirtualSerial.h"></File><File path="Demos\Device\ClassDriver\VirtualSerial\VirtualSerial.txt"></File></Folder><Folder name="VirtualSerialMassStorage"><Folder name="Lib"><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\DataflashManager.c"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\DataflashManager.h"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\SCSI.c"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\SCSI.h"></File></Folder><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\LUFA VirtualSerialMassStorage.inf"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\makefile"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\VirtualSerialMassStorage.c"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\VirtualSerialMassStorage.h"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\VirtualSerialMassStorage.txt"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Descriptors.c"></File><File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Descriptors.h"></File></Folder><Folder name="VirtualSerialMouse"><File path="Demos\Device\ClassDriver\VirtualSerialMouse\Descriptors.c"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\Descriptors.h"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\Doxygen.conf"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\LUFA VirtualSerialMouse.inf"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\makefile"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\VirtualSerialMouse.c"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\VirtualSerialMouse.h"></File><File path="Demos\Device\ClassDriver\VirtualSerialMouse\VirtualSerialMouse.txt"></File></Folder><File path="Demos\Device\ClassDriver\makefile"></File></Folder><Folder name="LowLevel"><Folder name="AudioInput"><File path="Demos\Device\LowLevel\AudioInput\AudioInput.c"></File><File path="Demos\Device\LowLevel\AudioInput\AudioInput.h"></File><File path="Demos\Device\LowLevel\AudioInput\AudioInput.txt"></File><File path="Demos\Device\LowLevel\AudioInput\Descriptors.c"></File><File path="Demos\Device\LowLevel\AudioInput\Descriptors.h"></File><File path="Demos\Device\LowLevel\AudioInput\Doxygen.conf"></File><File path="Demos\Device\LowLevel\AudioInput\makefile"></File></Folder><Folder name="AudioOutput"><File path="Demos\Device\LowLevel\AudioOutput\AudioOutput.c"></File><File path="Demos\Device\LowLevel\AudioOutput\AudioOutput.h"></File><File path="Demos\Device\LowLevel\AudioOutput\AudioOutput.txt"></File><File path="Demos\Device\LowLevel\AudioOutput\Descriptors.c"></File><File path="Demos\Device\LowLevel\AudioOutput\Descriptors.h"></File><File path="Demos\Device\LowLevel\AudioOutput\Doxygen.conf"></File><File path="Demos\Device\LowLevel\AudioOutput\makefile"></File></Folder><Folder name="DualVirtualSerial"><File path="Demos\Device\LowLevel\DualVirtualSerial\Descriptors.c"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\Descriptors.h"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\Doxygen.conf"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\DualVirtualSerial.c"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\DualVirtualSerial.h"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\DualVirtualSerial.txt"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\LUFA DualVirtualSerial.inf"></File><File path="Demos\Device\LowLevel\DualVirtualSerial\makefile"></File></Folder><Folder name="GenericHID"><File path="Demos\Device\LowLevel\GenericHID\Descriptors.c"></File><File path="Demos\Device\LowLevel\GenericHID\Descriptors.h"></File><File path="Demos\Device\LowLevel\GenericHID\Doxygen.conf"></File><File path="Demos\Device\LowLevel\GenericHID\GenericHID.c"></File><File path="Demos\Device\LowLevel\GenericHID\GenericHID.h"></File><File path="Demos\Device\LowLevel\GenericHID\GenericHID.txt"></File><File path="Demos\Device\LowLevel\GenericHID\makefile"></File></Folder><Folder name="Joystick"><File path="Demos\Device\LowLevel\Joystick\Descriptors.c"></File><File path="Demos\Device\LowLevel\Joystick\Descriptors.h"></File><File path="Demos\Device\LowLevel\Joystick\Doxygen.conf"></File><File path="Demos\Device\LowLevel\Joystick\Joystick.c"></File><File path="Demos\Device\LowLevel\Joystick\Joystick.h"></File><File path="Demos\Device\LowLevel\Joystick\Joystick.txt"></File><File path="Demos\Device\LowLevel\Joystick\makefile"></File></Folder><Folder name="Keyboard"><File path="Demos\Device\LowLevel\Keyboard\Descriptors.c"></File><File path="Demos\Device\LowLevel\Keyboard\Descriptors.h"></File><File path="Demos\Device\LowLevel\Keyboard\Doxygen.conf"></File><File path="Demos\Device\LowLevel\Keyboard\Keyboard.c"></File><File path="Demos\Device\LowLevel\Keyboard\Keyboard.h"></File><File path="Demos\Device\LowLevel\Keyboard\Keyboard.txt"></File><File path="Demos\Device\LowLevel\Keyboard\makefile"></File></Folder><Folder name="KeyboardMouse"><File path="Demos\Device\LowLevel\KeyboardMouse\Descriptors.c"></File><File path="Demos\Device\LowLevel\KeyboardMouse\Descriptors.h"></File><File path="Demos\Device\LowLevel\KeyboardMouse\Doxygen.conf"></File><File path="Demos\Device\LowLevel\KeyboardMouse\KeyboardMouse.c"></File><File path="Demos\Device\LowLevel\KeyboardMouse\KeyboardMouse.h"></File><File path="Demos\Device\LowLevel\KeyboardMouse\KeyboardMouse.txt"></File><File path="Demos\Device\LowLevel\KeyboardMouse\makefile"></File></Folder><Folder name="MassStorage"><Folder name="Lib"><File path="Demos\Device\LowLevel\MassStorage\Lib\DataflashManager.c"></File><File path="Demos\Device\LowLevel\MassStorage\Lib\DataflashManager.h"></File><File path="Demos\Device\LowLevel\MassStorage\Lib\SCSI.c"></File><File path="Demos\Device\LowLevel\MassStorage\Lib\SCSI.h"></File></Folder><File path="Demos\Device\LowLevel\MassStorage\Descriptors.c"></File><File path="Demos\Device\LowLevel\MassStorage\Descriptors.h"></File><File path="Demos\Device\LowLevel\MassStorage\Doxygen.conf"></File><File path="Demos\Device\LowLevel\MassStorage\makefile"></File><File path="Demos\Device\LowLevel\MassStorage\MassStorage.c"></File><File path="Demos\Device\LowLevel\MassStorage\MassStorage.h"></File><File path="Demos\Device\LowLevel\MassStorage\MassStorage.txt"></File></Folder><Folder name="MIDI"><File path="Demos\Device\LowLevel\MIDI\Descriptors.c"></File><File path="Demos\Device\LowLevel\MIDI\Descriptors.h"></File><File path="Demos\Device\LowLevel\MIDI\Doxygen.conf"></File><File path="Demos\Device\LowLevel\MIDI\makefile"></File><File path="Demos\Device\LowLevel\MIDI\MIDI.c"></File><File path="Demos\Device\LowLevel\MIDI\MIDI.h"></File><File path="Demos\Device\LowLevel\MIDI\MIDI.txt"></File></Folder><Folder name="Mouse"><File path="Demos\Device\LowLevel\Mouse\Descriptors.c"></File><File path="Demos\Device\LowLevel\Mouse\Descriptors.h"></File><File path="Demos\Device\LowLevel\Mouse\Doxygen.conf"></File><File path="Demos\Device\LowLevel\Mouse\makefile"></File><File path="Demos\Device\LowLevel\Mouse\Mouse.c"></File><File path="Demos\Device\LowLevel\Mouse\Mouse.h"></File><File path="Demos\Device\LowLevel\Mouse\Mouse.txt"></File></Folder><Folder name="RNDISEthernet"><Folder name="Lib"><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Webserver.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ARP.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ARP.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\DHCP.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\DHCP.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Ethernet.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Ethernet.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\EthernetProtocols.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ICMP.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ICMP.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\IP.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\IP.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ProtocolDecoders.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ProtocolDecoders.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\RNDIS.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\RNDIS.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\TCP.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\TCP.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\UDP.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\UDP.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Webserver.c"></File></Folder><File path="Demos\Device\LowLevel\RNDISEthernet\Descriptors.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Descriptors.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\Doxygen.conf"></File><File path="Demos\Device\LowLevel\RNDISEthernet\LUFA RNDIS.inf"></File><File path="Demos\Device\LowLevel\RNDISEthernet\makefile"></File><File path="Demos\Device\LowLevel\RNDISEthernet\RNDISEthernet.c"></File><File path="Demos\Device\LowLevel\RNDISEthernet\RNDISEthernet.h"></File><File path="Demos\Device\LowLevel\RNDISEthernet\RNDISEthernet.txt"></File></Folder><Folder name="VirtualSerial"><File path="Demos\Device\LowLevel\VirtualSerial\Descriptors.c"></File><File path="Demos\Device\LowLevel\VirtualSerial\Descriptors.h"></File><File path="Demos\Device\LowLevel\VirtualSerial\Doxygen.conf"></File><File path="Demos\Device\LowLevel\VirtualSerial\LUFA VirtualSerial.inf"></File><File path="Demos\Device\LowLevel\VirtualSerial\makefile"></File><File path="Demos\Device\LowLevel\VirtualSerial\VirtualSerial.c"></File><File path="Demos\Device\LowLevel\VirtualSerial\VirtualSerial.h"></File><File path="Demos\Device\LowLevel\VirtualSerial\VirtualSerial.txt"></File></Folder><File path="Demos\Device\LowLevel\makefile"></File></Folder><Folder name="Incomplete"><Folder name="SideShow"><Folder name="Lib"><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowApplications.c"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowApplications.h"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommands.c"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommands.h"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommon.c"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommon.h"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowContent.c"></File><File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowContent.h"></File></Folder><File path="Demos\Device\Incomplete\Sideshow\Descriptors.c"></File><File path="Demos\Device\Incomplete\Sideshow\Descriptors.h"></File><File path="Demos\Device\Incomplete\Sideshow\makefile"></File><File path="Demos\Device\Incomplete\Sideshow\Sideshow.c"></File><File path="Demos\Device\Incomplete\Sideshow\Sideshow.h"></File></Folder><Folder name="TestAndMeasurement"><File path="Demos\Device\Incomplete\TestAndMeasurement\Descriptors.c"></File><File path="Demos\Device\Incomplete\TestAndMeasurement\Descriptors.h"></File><File path="Demos\Device\Incomplete\TestAndMeasurement\TestAndMeasurement.c"></File><File path="Demos\Device\Incomplete\TestAndMeasurement\TestAndMeasurement.h"></File><File path="Demos\Device\Incomplete\TestAndMeasurement\makefile"></File></Folder></Folder><File path="Demos\Device\makefile"></File></Folder><Folder name="Host"><Folder name="ClassDriver"><Folder name="AndroidAccessoryHost"><File path="Demos\Host\ClassDriver\AndroidAccessoryHost\AndroidAccessoryHost.c"></File><File path="Demos\Host\ClassDriver\AndroidAccessoryHost\AndroidAccessoryHost.h"></File><File path="Demos\Host\ClassDriver\AndroidAccessoryHost\AndroidAccessoryHost.txt"></File><File path="Demos\Host\ClassDriver\AndroidAccessoryHost\makefile"></File><File path="Demos\Host\ClassDriver\AndroidAccessoryHost\Doxygen.conf"></File></Folder><Folder name="AudioInputHost"><File path="Demos\Host\ClassDriver\AudioInputHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\AudioInputHost\makefile"></File><File path="Demos\Host\ClassDriver\AudioInputHost\AudioInputHost.c"></File><File path="Demos\Host\ClassDriver\AudioInputHost\AudioInputHost.h"></File><File path="Demos\Host\ClassDriver\AudioInputHost\AudioInputHost.txt"></File></Folder><Folder name="AudioOutputHost"><File path="Demos\Host\ClassDriver\AudioOutputHost\AudioOutputHost.c"></File><File path="Demos\Host\ClassDriver\AudioOutputHost\AudioOutputHost.h"></File><File path="Demos\Host\ClassDriver\AudioOutputHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\AudioOutputHost\makefile"></File><File path="Demos\Host\ClassDriver\AudioOutputHost\AudioOutputHost.txt"></File></Folder><Folder name="JoystickHostWithParser"><File path="Demos\Host\ClassDriver\JoystickHostWithParser\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\JoystickHostWithParser\JoystickHostWithParser.c"></File><File path="Demos\Host\ClassDriver\JoystickHostWithParser\JoystickHostWithParser.h"></File><File path="Demos\Host\ClassDriver\JoystickHostWithParser\JoystickHostWithParser.txt"></File><File path="Demos\Host\ClassDriver\JoystickHostWithParser\makefile"></File></Folder><Folder name="KeyboardHost"><File path="Demos\Host\ClassDriver\KeyboardHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\KeyboardHost\KeyboardHost.c"></File><File path="Demos\Host\ClassDriver\KeyboardHost\KeyboardHost.h"></File><File path="Demos\Host\ClassDriver\KeyboardHost\makefile"></File><File path="Demos\Host\ClassDriver\KeyboardHost\KeyboardHost.txt"></File></Folder><Folder name="KeyboardHostWithParser"><File path="Demos\Host\ClassDriver\KeyboardHostWithParser\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\KeyboardHostWithParser\KeyboardHostWithParser.c"></File><File path="Demos\Host\ClassDriver\KeyboardHostWithParser\KeyboardHostWithParser.h"></File><File path="Demos\Host\ClassDriver\KeyboardHostWithParser\makefile"></File><File path="Demos\Host\ClassDriver\KeyboardHostWithParser\KeyboardHostWithParser.txt"></File></Folder><Folder name="MassStorageHost"><File path="Demos\Host\ClassDriver\MassStorageHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\MassStorageHost\makefile"></File><File path="Demos\Host\ClassDriver\MassStorageHost\MassStorageHost.c"></File><File path="Demos\Host\ClassDriver\MassStorageHost\MassStorageHost.h"></File><File path="Demos\Host\ClassDriver\MassStorageHost\MassStorageHost.txt"></File></Folder><Folder name="MIDIHost"><File path="Demos\Host\ClassDriver\MIDIHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\MIDIHost\makefile"></File><File path="Demos\Host\ClassDriver\MIDIHost\MIDIHost.c"></File><File path="Demos\Host\ClassDriver\MIDIHost\MIDIHost.h"></File><File path="Demos\Host\ClassDriver\MIDIHost\MIDIHost.txt"></File></Folder><Folder name="MouseHost"><File path="Demos\Host\ClassDriver\MouseHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\MouseHost\makefile"></File><File path="Demos\Host\ClassDriver\MouseHost\MouseHost.c"></File><File path="Demos\Host\ClassDriver\MouseHost\MouseHost.h"></File><File path="Demos\Host\ClassDriver\MouseHost\MouseHost.txt"></File></Folder><Folder name="MouseHostWithParser"><File path="Demos\Host\ClassDriver\MouseHostWithParser\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\MouseHostWithParser\makefile"></File><File path="Demos\Host\ClassDriver\MouseHostWithParser\MouseHostWithParser.txt"></File><File path="Demos\Host\ClassDriver\MouseHostWithParser\MouseHostWithParser.c"></File><File path="Demos\Host\ClassDriver\MouseHostWithParser\MouseHostWithParser.h"></File></Folder><Folder name="PrinterHost"><File path="Demos\Host\ClassDriver\PrinterHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\PrinterHost\makefile"></File><File path="Demos\Host\ClassDriver\PrinterHost\PrinterHost.c"></File><File path="Demos\Host\ClassDriver\PrinterHost\PrinterHost.h"></File><File path="Demos\Host\ClassDriver\PrinterHost\PrinterHost.txt"></File></Folder><Folder name="RNDISEthernetHost"><File path="Demos\Host\ClassDriver\RNDISEthernetHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\RNDISEthernetHost\makefile"></File><File path="Demos\Host\ClassDriver\RNDISEthernetHost\RNDISEthernetHost.c"></File><File path="Demos\Host\ClassDriver\RNDISEthernetHost\RNDISEthernetHost.h"></File><File path="Demos\Host\ClassDriver\RNDISEthernetHost\RNDISEthernetHost.txt"></File></Folder><Folder name="StillImageHost"><File path="Demos\Host\ClassDriver\StillImageHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\StillImageHost\makefile"></File><File path="Demos\Host\ClassDriver\StillImageHost\StillImageHost.c"></File><File path="Demos\Host\ClassDriver\StillImageHost\StillImageHost.h"></File><File path="Demos\Host\ClassDriver\StillImageHost\StillImageHost.txt"></File></Folder><Folder name="VirtualSerialHost"><File path="Demos\Host\ClassDriver\VirtualSerialHost\Doxygen.conf"></File><File path="Demos\Host\ClassDriver\VirtualSerialHost\makefile"></File><File path="Demos\Host\ClassDriver\VirtualSerialHost\VirtualSerialHost.c"></File><File path="Demos\Host\ClassDriver\VirtualSerialHost\VirtualSerialHost.h"></File><File path="Demos\Host\ClassDriver\VirtualSerialHost\VirtualSerialHost.txt"></File></Folder><File path="Demos\Host\ClassDriver\makefile"></File></Folder><Folder name="LowLevel"><Folder name="AndroidAccessoryHost"><Folder name="Lib"><File path="Demos\Host\LowLevel\AndroidAccessoryHost\Lib\AndroidAccessoryCommands.c"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\Lib\AndroidAccessoryCommands.h"></File></Folder><File path="Demos\Host\LowLevel\AndroidAccessoryHost\AndroidAccessoryHost.c"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\AndroidAccessoryHost.h"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\DeviceDescriptor.c"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\DeviceDescriptor.h"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\makefile"></File><File path="Demos\Host\LowLevel\AndroidAccessoryHost\AndroidAccessoryHost.txt"></File></Folder><Folder name="AudioInputHost"><File path="Demos\Host\LowLevel\AudioInputHost\AudioInputHost.c"></File><File path="Demos\Host\LowLevel\AudioInputHost\AudioInputHost.h"></File><File path="Demos\Host\LowLevel\AudioInputHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\AudioInputHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\AudioInputHost\makefile"></File><File path="Demos\Host\LowLevel\AudioInputHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\AudioInputHost\AudioInputHost.txt"></File></Folder><Folder name="AudioOutputHost"><File path="Demos\Host\LowLevel\AudioOutputHost\AudioOutputHost.c"></File><File path="Demos\Host\LowLevel\AudioOutputHost\AudioOutputHost.h"></File><File path="Demos\Host\LowLevel\AudioOutputHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\AudioOutputHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\AudioOutputHost\makefile"></File><File path="Demos\Host\LowLevel\AudioOutputHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\AudioOutputHost\AudioOutputHost.txt"></File></Folder><Folder name="GenericHIDHost"><File path="Demos\Host\LowLevel\GenericHIDHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\GenericHIDHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\GenericHIDHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\GenericHIDHost\GenericHIDHost.c"></File><File path="Demos\Host\LowLevel\GenericHIDHost\GenericHIDHost.h"></File><File path="Demos\Host\LowLevel\GenericHIDHost\GenericHIDHost.txt"></File><File path="Demos\Host\LowLevel\GenericHIDHost\makefile"></File></Folder><Folder name="JoystickHostWithParser"><File path="Demos\Host\LowLevel\JoystickHostWithParser\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\Doxygen.conf"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\HIDReport.c"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\HIDReport.h"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\JoystickHostWithParser.c"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\JoystickHostWithParser.h"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\JoystickHostWithParser.txt"></File><File path="Demos\Host\LowLevel\JoystickHostWithParser\makefile"></File></Folder><Folder name="KeyboardHost"><File path="Demos\Host\LowLevel\KeyboardHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\KeyboardHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\KeyboardHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\KeyboardHost\KeyboardHost.c"></File><File path="Demos\Host\LowLevel\KeyboardHost\KeyboardHost.h"></File><File path="Demos\Host\LowLevel\KeyboardHost\KeyboardHost.txt"></File><File path="Demos\Host\LowLevel\KeyboardHost\makefile"></File></Folder><Folder name="KeyboardHostWithParser"><File path="Demos\Host\LowLevel\KeyboardHostWithParser\makefile"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\Doxygen.conf"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\HIDReport.c"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\HIDReport.h"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\KeyboardHostWithParser.c"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\KeyboardHostWithParser.h"></File><File path="Demos\Host\LowLevel\KeyboardHostWithParser\KeyboardHostWithParser.txt"></File></Folder><Folder name="MassStorageHost"><Folder name="Lib"><File path="Demos\Host\LowLevel\MassStorageHost\Lib\MassStoreCommands.c"></File><File path="Demos\Host\LowLevel\MassStorageHost\Lib\MassStoreCommands.h"></File></Folder><File path="Demos\Host\LowLevel\MassStorageHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\MassStorageHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\MassStorageHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\MassStorageHost\makefile"></File><File path="Demos\Host\LowLevel\MassStorageHost\MassStorageHost.c"></File><File path="Demos\Host\LowLevel\MassStorageHost\MassStorageHost.h"></File><File path="Demos\Host\LowLevel\MassStorageHost\MassStorageHost.txt"></File></Folder><Folder name="MIDIHost"><File path="Demos\Host\LowLevel\MIDIHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\MIDIHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\MIDIHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\MIDIHost\makefile"></File><File path="Demos\Host\LowLevel\MIDIHost\MIDIHost.c"></File><File path="Demos\Host\LowLevel\MIDIHost\MIDIHost.h"></File><File path="Demos\Host\LowLevel\MIDIHost\MIDIHost.txt"></File></Folder><Folder name="MouseHost"><File path="Demos\Host\LowLevel\MouseHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\MouseHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\MouseHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\MouseHost\makefile"></File><File path="Demos\Host\LowLevel\MouseHost\MouseHost.c"></File><File path="Demos\Host\LowLevel\MouseHost\MouseHost.h"></File><File path="Demos\Host\LowLevel\MouseHost\MouseHost.txt"></File></Folder><Folder name="MouseHostWithParser"><File path="Demos\Host\LowLevel\MouseHostWithParser\MouseHostWithParser.txt"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\Doxygen.conf"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\HIDReport.c"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\HIDReport.h"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\makefile"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\MouseHostWithParser.c"></File><File path="Demos\Host\LowLevel\MouseHostWithParser\MouseHostWithParser.h"></File></Folder><Folder name="PrinterHost"><Folder name="Lib"><File path="Demos\Host\LowLevel\PrinterHost\Lib\PrinterCommands.c"></File><File path="Demos\Host\LowLevel\PrinterHost\Lib\PrinterCommands.h"></File></Folder><File path="Demos\Host\LowLevel\PrinterHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\PrinterHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\PrinterHost\makefile"></File><File path="Demos\Host\LowLevel\PrinterHost\PrinterHost.c"></File><File path="Demos\Host\LowLevel\PrinterHost\PrinterHost.h"></File><File path="Demos\Host\LowLevel\PrinterHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\PrinterHost\PrinterHost.txt"></File></Folder><Folder name="RNDISEthernetHost"><Folder name="Lib"><File path="Demos\Host\LowLevel\RNDISEthernetHost\Lib\RNDISCommands.c"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\Lib\RNDISCommands.h"></File></Folder><File path="Demos\Host\LowLevel\RNDISEthernetHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\makefile"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\RNDISEthernetHost.c"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\RNDISEthernetHost.h"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\RNDISEthernetHost\RNDISHost.txt"></File></Folder><Folder name="StillImageHost"><Folder name="Lib"><File path="Demos\Host\LowLevel\StillImageHost\Lib\StillImageCommands.c"></File><File path="Demos\Host\LowLevel\StillImageHost\Lib\StillImageCommands.h"></File><File path="Demos\Host\LowLevel\StillImageHost\Lib\PIMACodes.h"></File></Folder><File path="Demos\Host\LowLevel\StillImageHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\StillImageHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\StillImageHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\StillImageHost\makefile"></File><File path="Demos\Host\LowLevel\StillImageHost\StillImageHost.c"></File><File path="Demos\Host\LowLevel\StillImageHost\StillImageHost.h"></File><File path="Demos\Host\LowLevel\StillImageHost\StillImageHost.txt"></File></Folder><Folder name="VirtualSerialHost"><File path="Demos\Host\LowLevel\VirtualSerialHost\ConfigDescriptor.c"></File><File path="Demos\Host\LowLevel\VirtualSerialHost\ConfigDescriptor.h"></File><File path="Demos\Host\LowLevel\VirtualSerialHost\Doxygen.conf"></File><File path="Demos\Host\LowLevel\VirtualSerialHost\makefile"></File><File path="Demos\Host\LowLevel\VirtualSerialHost\VirtualSerialHost.c"></File><File path="Demos\Host\LowLevel\VirtualSerialHost\VirtualSerialHost.h"></File><File path="Demos\Host\LowLevel\VirtualSerialHost\VirtualSerialHost.txt"></File></Folder><File path="Demos\Host\LowLevel\makefile"></File></Folder><Folder name="Incomplete"><Folder name="BluetoothHost"><Folder name="Lib"><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothACLPackets.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothACLPackets.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothClassCodes.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothHCICommands.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothHCICommands.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothStack.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\BluetoothStack.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\SDPServices.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\SDPServices.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\RFCOMM.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\RFCOMM.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\SDP.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\SDP.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\RFCOMMControl.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\Lib\RFCOMMControl.h"></File></Folder><File path="Demos\Host\Incomplete\BluetoothHost\makefile"></File><File path="Demos\Host\Incomplete\BluetoothHost\BluetoothHost.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\BluetoothHost.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\ConfigDescriptor.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\ConfigDescriptor.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\DeviceDescriptor.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\DeviceDescriptor.h"></File><File path="Demos\Host\Incomplete\BluetoothHost\Doxygen.conf"></File><File path="Demos\Host\Incomplete\BluetoothHost\BluetoothEvents.c"></File><File path="Demos\Host\Incomplete\BluetoothHost\BluetoothEvents.h"></File></Folder></Folder><File path="Demos\Host\makefile"></File></Folder><Folder name="DualRole"><Folder name="ClassDriver"><Folder name="MouseHostDevice"><File path="Demos\DualRole\ClassDriver\MouseHostDevice\Doxygen.conf"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\makefile"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\MouseHostDevice.c"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\MouseHostDevice.h"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\Descriptors.c"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\Descriptors.h"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\DeviceFunctions.c"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\HostFunctions.c"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\HostFunctions.h"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\DeviceFunctions.h"></File><File path="Demos\DualRole\ClassDriver\MouseHostDevice\MouseHostDevice.txt"></File></Folder><File path="Demos\DualRole\ClassDriver\makefile"></File></Folder><File path="Demos\DualRole\makefile"></File></Folder><File path="Demos\makefile"></File></Folder><Folder name="LUFA"><Folder name="CodeTemplates"><Folder name="DriverStubs"><File path="LUFA\CodeTemplates\DriverStubs\Buttons.h"></File><File path="LUFA\CodeTemplates\DriverStubs\Dataflash.h"></File><File path="LUFA\CodeTemplates\DriverStubs\Joystick.h"></File><File path="LUFA\CodeTemplates\DriverStubs\LEDs.h"></File></Folder><File path="LUFA\CodeTemplates\makefile_template.avr8"></File><File path="LUFA\CodeTemplates\makefile_template.uc3"></File><File path="LUFA\CodeTemplates\makefile_template.xmega"></File><File path="LUFA\CodeTemplates\LUFAConfig.h"></File></Folder><Folder name="Common"><File path="LUFA\Common\Common.h"></File><File path="LUFA\Common\BoardTypes.h"></File><File path="LUFA\Common\Attributes.h"></File><File path="LUFA\Common\Architectures.h"></File><File path="LUFA\Common\Endianness.h"></File><File path="LUFA\Common\CompilerSpecific.h"></File><File path="LUFA\Common\ArchitectureSpecific.h"></File></Folder><Folder name="DoxygenPages"><Folder name="Style"><File path="LUFA\DoxygenPages\Style\Footer.htm"></File><File path="LUFA\DoxygenPages\Style\Style.css"></File></Folder><Folder name="Images"><Folder name="AS5_AS6_Import"><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step1.png"></File><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step2.png"></File><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step3.png"></File><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step4.png"></File><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step5_1.png"></File><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step5_2.png"></File><File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step5_3.png"></File></Folder><File path="LUFA\DoxygenPages\Images\Author.jpg"></File><File path="LUFA\DoxygenPages\Images\LUFA.png"></File><File path="LUFA\DoxygenPages\Images\LUFA_thumb.png"></File></Folder><File path="LUFA\DoxygenPages\BuildingLinkableLibraries.txt"></File><File path="LUFA\DoxygenPages\ChangeLog.txt"></File><File path="LUFA\DoxygenPages\CompileTimeTokens.txt"></File><File path="LUFA\DoxygenPages\CompilingApps.txt"></File><File path="LUFA\DoxygenPages\ConfiguringApps.txt"></File><File path="LUFA\DoxygenPages\DevelopingWithLUFA.txt"></File><File path="LUFA\DoxygenPages\DeviceSupport.txt"></File><File path="LUFA\DoxygenPages\DirectorySummaries.txt"></File><File path="LUFA\DoxygenPages\Donating.txt"></File><File path="LUFA\DoxygenPages\FutureChanges.txt"></File><File path="LUFA\DoxygenPages\GettingStarted.txt"></File><File path="LUFA\DoxygenPages\Groups.txt"></File><File path="LUFA\DoxygenPages\LibraryResources.txt"></File><File path="LUFA\DoxygenPages\LicenseInfo.txt"></File><File path="LUFA\DoxygenPages\LUFAPoweredProjects.txt"></File><File path="LUFA\DoxygenPages\MainPage.txt"></File><File path="LUFA\DoxygenPages\MigrationInformation.txt"></File><File path="LUFA\DoxygenPages\ProgrammingApps.txt"></File><File path="LUFA\DoxygenPages\SoftwareBootloaderJump.txt"></File><File path="LUFA\DoxygenPages\VIDAndPIDValues.txt"></File><File path="LUFA\DoxygenPages\WritingBoardDrivers.txt"></File><File path="LUFA\DoxygenPages\ExportingLibrary.txt"></File><File path="LUFA\DoxygenPages\KnownIssues.txt"></File></Folder><Folder name="Drivers"><Folder name="USB"><Folder name="Class"><Folder name="Device"><File path="LUFA\Drivers\USB\Class\Device\AudioClassDevice.c"></File><File path="LUFA\Drivers\USB\Class\Device\AudioClassDevice.h"></File><File path="LUFA\Drivers\USB\Class\Device\CDCClassDevice.c"></File><File path="LUFA\Drivers\USB\Class\Device\CDCClassDevice.h"></File><File path="LUFA\Drivers\USB\Class\Device\HIDClassDevice.c"></File><File path="LUFA\Drivers\USB\Class\Device\HIDClassDevice.h"></File><File path="LUFA\Drivers\USB\Class\Device\MassStorageClassDevice.c"></File><File path="LUFA\Drivers\USB\Class\Device\MassStorageClassDevice.h"></File><File path="LUFA\Drivers\USB\Class\Device\MIDIClassDevice.c"></File><File path="LUFA\Drivers\USB\Class\Device\MIDIClassDevice.h"></File><File path="LUFA\Drivers\USB\Class\Device\RNDISClassDevice.c"></File><File path="LUFA\Drivers\USB\Class\Device\RNDISClassDevice.h"></File></Folder><Folder name="Host"><File path="LUFA\Drivers\USB\Class\Host\AudioClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\AudioClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\CDCClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\CDCClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\HIDClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\HIDClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\MassStorageClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\MassStorageClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\MIDIClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\MIDIClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\PrinterClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\PrinterClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\RNDISClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\RNDISClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\StillImageClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\StillImageClassHost.h"></File><File path="LUFA\Drivers\USB\Class\Host\AndroidAccessoryClassHost.c"></File><File path="LUFA\Drivers\USB\Class\Host\AndroidAccessoryClassHost.h"></File></Folder><Folder name="Common"><File path="LUFA\Drivers\USB\Class\Common\AudioClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\CDCClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\HIDClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\HIDParser.c"></File><File path="LUFA\Drivers\USB\Class\Common\HIDParser.h"></File><File path="LUFA\Drivers\USB\Class\Common\HIDReportData.h"></File><File path="LUFA\Drivers\USB\Class\Common\MassStorageClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\MIDIClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\PrinterClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\RNDISClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\StillImageClassCommon.h"></File><File path="LUFA\Drivers\USB\Class\Common\AndroidAccessoryClassCommon.h"></File></Folder><File path="LUFA\Drivers\USB\Class\AudioClass.h"></File><File path="LUFA\Drivers\USB\Class\CDCClass.h"></File><File path="LUFA\Drivers\USB\Class\HIDClass.h"></File><File path="LUFA\Drivers\USB\Class\MassStorageClass.h"></File><File path="LUFA\Drivers\USB\Class\MIDIClass.h"></File><File path="LUFA\Drivers\USB\Class\PrinterClass.h"></File><File path="LUFA\Drivers\USB\Class\RNDISClass.h"></File><File path="LUFA\Drivers\USB\Class\StillImageClass.h"></File><File path="LUFA\Drivers\USB\Class\AndroidAccessoryClass.h"></File></Folder><Folder name="Core"><Folder name="AVR8"><Folder name="Template"><File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Endpoint_Control_R.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Endpoint_Control_W.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Endpoint_RW.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Pipe_RW.c"></File></Folder><File path="LUFA\Drivers\USB\Core\AVR8\Device_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Device_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\Endpoint_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Endpoint_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\Host_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Host_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\OTG_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\Pipe_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\Pipe_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\USBController_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\USBController_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\USBInterrupt_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\USBInterrupt_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\EndpointStream_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\EndpointStream_AVR8.h"></File><File path="LUFA\Drivers\USB\Core\AVR8\PipeStream_AVR8.c"></File><File path="LUFA\Drivers\USB\Core\AVR8\PipeStream_AVR8.h"></File></Folder><Folder name="UC3"><Folder name="Template"><File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Endpoint_Control_R.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Endpoint_Control_W.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Endpoint_RW.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Pipe_RW.c"></File></Folder><File path="LUFA\Drivers\USB\Core\UC3\Device_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Device_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\Endpoint_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Endpoint_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\Pipe_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Pipe_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\USBController_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\USBController_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\USBInterrupt_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\USBInterrupt_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\Host_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\Host_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\EndpointStream_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\EndpointStream_UC3.h"></File><File path="LUFA\Drivers\USB\Core\UC3\PipeStream_UC3.c"></File><File path="LUFA\Drivers\USB\Core\UC3\PipeStream_UC3.h"></File></Folder><Folder name="XMEGA"><Folder name="Template"><File path="LUFA\Drivers\USB\Core\XMEGA\Template\Template_Endpoint_Control_R.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Template\Template_Endpoint_Control_W.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Template\Template_Endpoint_RW.c"></File></Folder><File path="LUFA\Drivers\USB\Core\XMEGA\Device_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Device_XMEGA.h"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Endpoint_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Endpoint_XMEGA.h"></File><File path="LUFA\Drivers\USB\Core\XMEGA\EndpointStream_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\EndpointStream_XMEGA.h"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Host_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\Pipe_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\PipeStream_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\USBController_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\USBController_XMEGA.h"></File><File path="LUFA\Drivers\USB\Core\XMEGA\USBInterrupt_XMEGA.c"></File><File path="LUFA\Drivers\USB\Core\XMEGA\USBInterrupt_XMEGA.h"></File></Folder><File path="LUFA\Drivers\USB\Core\ConfigDescriptor.c"></File><File path="LUFA\Drivers\USB\Core\ConfigDescriptor.h"></File><File path="LUFA\Drivers\USB\Core\DeviceStandardReq.c"></File><File path="LUFA\Drivers\USB\Core\DeviceStandardReq.h"></File><File path="LUFA\Drivers\USB\Core\Events.c"></File><File path="LUFA\Drivers\USB\Core\Events.h"></File><File path="LUFA\Drivers\USB\Core\HostStandardReq.c"></File><File path="LUFA\Drivers\USB\Core\HostStandardReq.h"></File><File path="LUFA\Drivers\USB\Core\StdDescriptors.h"></File><File path="LUFA\Drivers\USB\Core\StdRequestType.h"></File><File path="LUFA\Drivers\USB\Core\USBMode.h"></File><File path="LUFA\Drivers\USB\Core\USBTask.c"></File><File path="LUFA\Drivers\USB\Core\USBTask.h"></File><File path="LUFA\Drivers\USB\Core\Device.h"></File><File path="LUFA\Drivers\USB\Core\Endpoint.h"></File><File path="LUFA\Drivers\USB\Core\Host.h"></File><File path="LUFA\Drivers\USB\Core\Pipe.h"></File><File path="LUFA\Drivers\USB\Core\USBController.h"></File><File path="LUFA\Drivers\USB\Core\USBInterrupt.h"></File><File path="LUFA\Drivers\USB\Core\OTG.h"></File><File path="LUFA\Drivers\USB\Core\EndpointStream.h"></File><File path="LUFA\Drivers\USB\Core\PipeStream.h"></File></Folder><File path="LUFA\Drivers\USB\USB.h"></File></Folder><Folder name="Misc"><File path="LUFA\Drivers\Misc\TerminalCodes.h"></File><File path="LUFA\Drivers\Misc\RingBuffer.h"></File><File path="LUFA\Drivers\Misc\AT45DB321C.h"></File><File path="LUFA\Drivers\Misc\AT45DB642D.h"></File></Folder><Folder name="Board"><Folder name="AVR8"><Folder name="ADAFRUITU4"><File path="LUFA\Drivers\Board\AVR8\ADAFRUITU4\LEDs.h"></File></Folder><Folder name="ATAVRUSBRF01"><File path="LUFA\Drivers\Board\AVR8\ATAVRUSBRF01\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\ATAVRUSBRF01\LEDs.h"></File></Folder><Folder name="BENITO"><File path="LUFA\Drivers\Board\AVR8\BENITO\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\BENITO\LEDs.h"></File></Folder><Folder name="BIGMULTIO"><File path="LUFA\Drivers\Board\AVR8\BIGMULTIO\LEDs.h"></File></Folder><Folder name="BLACKCAT"><File path="LUFA\Drivers\Board\AVR8\BLACKCAT\LEDs.h"></File></Folder><Folder name="BUI"><File path="LUFA\Drivers\Board\AVR8\BUI\LEDs.h"></File></Folder><Folder name="BUMBLEB"><File path="LUFA\Drivers\Board\AVR8\BUMBLEB\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\BUMBLEB\Joystick.h"></File><File path="LUFA\Drivers\Board\AVR8\BUMBLEB\LEDs.h"></File></Folder><Folder name="CULV3"><File path="LUFA\Drivers\Board\AVR8\CULV3\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\CULV3\LEDs.h"></File></Folder><Folder name="DUCE"><File path="LUFA\Drivers\Board\AVR8\DUCE\LEDs.h"></File></Folder><Folder name="EVK527"><File path="LUFA\Drivers\Board\AVR8\EVK527\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\EVK527\Dataflash.h"></File><File path="LUFA\Drivers\Board\AVR8\EVK527\Joystick.h"></File><File path="LUFA\Drivers\Board\AVR8\EVK527\LEDs.h"></File></Folder><Folder name="JMDBU2"><File path="LUFA\Drivers\Board\AVR8\JMDBU2\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\JMDBU2\LEDs.h"></File></Folder><Folder name="MAXIMUS"><File path="LUFA\Drivers\Board\AVR8\MAXIMUS\LEDs.h"></File></Folder><Folder name="MICROPENDOUS"><File path="LUFA\Drivers\Board\AVR8\MICROPENDOUS\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\MICROPENDOUS\LEDs.h"></File></Folder><Folder name="MICROSIN162"><File path="LUFA\Drivers\Board\AVR8\MICROSIN162\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\MICROSIN162\LEDs.h"></File></Folder><Folder name="MINIMUS"><File path="LUFA\Drivers\Board\AVR8\MINIMUS\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\MINIMUS\LEDs.h"></File></Folder><Folder name="MULTIO"><File path="LUFA\Drivers\Board\AVR8\MULTIO\LEDs.h"></File></Folder><Folder name="OLIMEX32U4"><File path="LUFA\Drivers\Board\AVR8\OLIMEX32U4\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\OLIMEX32U4\LEDs.h"></File></Folder><Folder name="OLIMEX162"><File path="LUFA\Drivers\Board\AVR8\OLIMEX162\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\OLIMEX162\LEDs.h"></File></Folder><Folder name="OLIMEXT32U4"><File path="LUFA\Drivers\Board\AVR8\OLIMEXT32U4\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\OLIMEXT32U4\LEDs.h"></File></Folder><Folder name="RZUSBSTICK"><File path="LUFA\Drivers\Board\AVR8\RZUSBSTICK\LEDs.h"></File></Folder><Folder name="SPARKFUN8U2"><File path="LUFA\Drivers\Board\AVR8\SPARKFUN8U2\LEDs.h"></File></Folder><Folder name="STK525"><File path="LUFA\Drivers\Board\AVR8\STK525\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\STK525\Dataflash.h"></File><File path="LUFA\Drivers\Board\AVR8\STK525\Joystick.h"></File><File path="LUFA\Drivers\Board\AVR8\STK525\LEDs.h"></File></Folder><Folder name="STK526"><File path="LUFA\Drivers\Board\AVR8\STK526\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\STK526\Dataflash.h"></File><File path="LUFA\Drivers\Board\AVR8\STK526\Joystick.h"></File><File path="LUFA\Drivers\Board\AVR8\STK526\LEDs.h"></File></Folder><Folder name="TEENSY"><File path="LUFA\Drivers\Board\AVR8\TEENSY\LEDs.h"></File></Folder><Folder name="TUL"><File path="LUFA\Drivers\Board\AVR8\TUL\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\TUL\LEDs.h"></File></Folder><Folder name="UDIP"><File path="LUFA\Drivers\Board\AVR8\UDIP\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\UDIP\LEDs.h"></File></Folder><Folder name="UNO"><File path="LUFA\Drivers\Board\AVR8\UNO\LEDs.h"></File></Folder><Folder name="USB2AX"><File path="LUFA\Drivers\Board\AVR8\USB2AX\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\USB2AX\LEDs.h"></File></Folder><Folder name="USBFOO"><File path="LUFA\Drivers\Board\AVR8\USBFOO\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\USBFOO\LEDs.h"></File></Folder><Folder name="USBKEY"><File path="LUFA\Drivers\Board\AVR8\USBKEY\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\USBKEY\Dataflash.h"></File><File path="LUFA\Drivers\Board\AVR8\USBKEY\Joystick.h"></File><File path="LUFA\Drivers\Board\AVR8\USBKEY\LEDs.h"></File></Folder><Folder name="USBTINYMKII"><File path="LUFA\Drivers\Board\AVR8\USBTINYMKII\Buttons.h"></File><File path="LUFA\Drivers\Board\AVR8\USBTINYMKII\LEDs.h"></File></Folder><Folder name="XPLAIN"><File path="LUFA\Drivers\Board\AVR8\XPLAIN\Dataflash.h"></File><File path="LUFA\Drivers\Board\AVR8\XPLAIN\LEDs.h"></File></Folder></Folder><Folder name="UC3"><Folder name="EVK1100"><File path="LUFA\Drivers\Board\UC3\EVK1100\Buttons.h"></File><File path="LUFA\Drivers\Board\UC3\EVK1100\Joystick.h"></File><File path="LUFA\Drivers\Board\UC3\EVK1100\LEDs.h"></File></Folder><Folder name="EVK1101"><File path="LUFA\Drivers\Board\UC3\EVK1101\Buttons.h"></File><File path="LUFA\Drivers\Board\UC3\EVK1101\Joystick.h"></File><File path="LUFA\Drivers\Board\UC3\EVK1101\LEDs.h"></File></Folder><Folder name="EVK1104"><File path="LUFA\Drivers\Board\UC3\EVK1104\Buttons.h"></File><File path="LUFA\Drivers\Board\UC3\EVK1104\LEDs.h"></File></Folder></Folder><Folder name="XMEGA"><Folder name="A3BU_XPLAINED"><File path="LUFA\Drivers\Board\XMEGA\A3BU_XPLAINED\Buttons.h"></File><File path="LUFA\Drivers\Board\XMEGA\A3BU_XPLAINED\LEDs.h"></File><File path="LUFA\Drivers\Board\XMEGA\A3BU_XPLAINED\Dataflash.h"></File></Folder><Folder name="B1_XPLAINED"><File path="LUFA\Drivers\Board\XMEGA\B1_XPLAINED\Buttons.h"></File><File path="LUFA\Drivers\Board\XMEGA\B1_XPLAINED\LEDs.h"></File><File path="LUFA\Drivers\Board\XMEGA\B1_XPLAINED\Dataflash.h"></File></Folder></Folder><File path="LUFA\Drivers\Board\Temperature.h"></File><File path="LUFA\Drivers\Board\Dataflash.h"></File><File path="LUFA\Drivers\Board\Joystick.h"></File><File path="LUFA\Drivers\Board\Temperature.c"></File><File path="LUFA\Drivers\Board\LEDs.h"></File><File path="LUFA\Drivers\Board\Buttons.h"></File></Folder><Folder name="Peripheral"><Folder name="AVR8"><File path="LUFA\Drivers\Peripheral\AVR8\ADC_AVR8.h"></File><File path="LUFA\Drivers\Peripheral\AVR8\Serial_AVR8.c"></File><File path="LUFA\Drivers\Peripheral\AVR8\Serial_AVR8.h"></File><File path="LUFA\Drivers\Peripheral\AVR8\SPI_AVR8.h"></File><File path="LUFA\Drivers\Peripheral\AVR8\TWI_AVR8.c"></File><File path="LUFA\Drivers\Peripheral\AVR8\TWI_AVR8.h"></File><File path="LUFA\Drivers\Peripheral\AVR8\SerialSPI_AVR8.h"></File></Folder><Folder name="UC3"></Folder><Folder name="XMEGA"><File path="LUFA\Drivers\Peripheral\XMEGA\SPI_XMEGA.h"></File><File path="LUFA\Drivers\Peripheral\XMEGA\Serial_XMEGA.c"></File><File path="LUFA\Drivers\Peripheral\XMEGA\Serial_XMEGA.h"></File><File path="LUFA\Drivers\Peripheral\XMEGA\SerialSPI_XMEGA.h"></File></Folder><File path="LUFA\Drivers\Peripheral\ADC.h"></File><File path="LUFA\Drivers\Peripheral\TWI.h"></File><File path="LUFA\Drivers\Peripheral\Serial.h"></File><File path="LUFA\Drivers\Peripheral\SPI.h"></File><File path="LUFA\Drivers\Peripheral\SerialSPI.h"></File></Folder></Folder><Folder name="Platform"><Folder name="AVR8"></Folder><Folder name="UC3"><File path="LUFA\Platform\UC3\InterruptManagement.h"></File><File path="LUFA\Platform\UC3\InterruptManagement.c"></File><File path="LUFA\Platform\UC3\Exception.S"></File><File path="LUFA\Platform\UC3\ClockManagement.h"></File></Folder><Folder name="XMEGA"><File path="LUFA\Platform\XMEGA\ClockManagement.h"></File></Folder></Folder><File path="LUFA\makefile"></File><File path="LUFA\Version.h"></File><File path="LUFA\Doxygen.conf"></File><File path="LUFA\License.txt"></File></Folder><Folder name="Bootloaders"><Folder name="CDC"><File path="Bootloaders\CDC\BootloaderCDC.c"></File><File path="Bootloaders\CDC\BootloaderCDC.h"></File><File path="Bootloaders\CDC\Descriptors.c"></File><File path="Bootloaders\CDC\Descriptors.h"></File><File path="Bootloaders\CDC\makefile"></File><File path="Bootloaders\CDC\LUFA CDC Bootloader.inf"></File><File path="Bootloaders\CDC\Doxygen.conf"></File><File path="Bootloaders\CDC\BootloaderCDC.txt"></File><File path="Bootloaders\CDC\BootloaderAPI.c"></File><File path="Bootloaders\CDC\BootloaderAPI.h"></File><File path="Bootloaders\CDC\BootloaderAPITable.S"></File></Folder><Folder name="DFU"><File path="Bootloaders\DFU\BootloaderDFU.c"></File><File path="Bootloaders\DFU\BootloaderDFU.h"></File><File path="Bootloaders\DFU\Descriptors.c"></File><File path="Bootloaders\DFU\Descriptors.h"></File><File path="Bootloaders\DFU\makefile"></File><File path="Bootloaders\DFU\BootloaderDFU.txt"></File><File path="Bootloaders\DFU\Doxygen.conf"></File><File path="Bootloaders\DFU\BootloaderAPI.c"></File><File path="Bootloaders\DFU\BootloaderAPI.h"></File><File path="Bootloaders\DFU\BootloaderAPITable.S"></File></Folder><Folder name="HID"><Folder name="HostLoaderApp"><File path="Bootloaders\HID\HostLoaderApp\gpl3.txt"></File><File path="Bootloaders\HID\HostLoaderApp\Makefile"></File><File path="Bootloaders\HID\HostLoaderApp\Makefile.bsd"></File><File path="Bootloaders\HID\HostLoaderApp\hid_bootloader_cli.c"></File></Folder><File path="Bootloaders\HID\Descriptors.c"></File><File path="Bootloaders\HID\Descriptors.h"></File><File path="Bootloaders\HID\makefile"></File><File path="Bootloaders\HID\BootloaderHID.txt"></File><File path="Bootloaders\HID\BootloaderHID.c"></File><File path="Bootloaders\HID\BootloaderHID.h"></File><File path="Bootloaders\HID\Doxygen.conf"></File></Folder><File path="Bootloaders\makefile"></File></Folder><Folder name="Projects"><Folder name="AVRISP-MKII"><Folder name="Lib"><Folder name="ISP"><File path="Projects\AVRISP-MKII\Lib\ISP\ISPProtocol.c"></File><File path="Projects\AVRISP-MKII\Lib\ISP\ISPProtocol.h"></File><File path="Projects\AVRISP-MKII\Lib\ISP\ISPTarget.c"></File><File path="Projects\AVRISP-MKII\Lib\ISP\ISPTarget.h"></File></Folder><Folder name="XPROG"><File path="Projects\AVRISP-MKII\Lib\XPROG\TINYNVM.c"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\TINYNVM.h"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\XMEGANVM.c"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\XMEGANVM.h"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGProtocol.c"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGProtocol.h"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGTarget.c"></File><File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGTarget.h"></File></Folder><File path="Projects\AVRISP-MKII\Lib\V2Protocol.c"></File><File path="Projects\AVRISP-MKII\Lib\V2Protocol.h"></File><File path="Projects\AVRISP-MKII\Lib\V2ProtocolConstants.h"></File><File path="Projects\AVRISP-MKII\Lib\V2ProtocolParams.c"></File><File path="Projects\AVRISP-MKII\Lib\V2ProtocolParams.h"></File></Folder><File path="Projects\AVRISP-MKII\Doxygen.conf"></File><File path="Projects\AVRISP-MKII\makefile"></File><File path="Projects\AVRISP-MKII\AVRISP-MKII.c"></File><File path="Projects\AVRISP-MKII\AVRISP-MKII.h"></File><File path="Projects\AVRISP-MKII\AVRISP-MKII.txt"></File><File path="Projects\AVRISP-MKII\AVRISPDescriptors.c"></File><File path="Projects\AVRISP-MKII\AVRISPDescriptors.h"></File></Folder><Folder name="Benito"><File path="Projects\Benito\Benito.c"></File><File path="Projects\Benito\Benito.h"></File><File path="Projects\Benito\Descriptors.c"></File><File path="Projects\Benito\Descriptors.h"></File><File path="Projects\Benito\Doxygen.conf"></File><File path="Projects\Benito\makefile"></File><File path="Projects\Benito\Benito.txt"></File><File path="Projects\Benito\Benito Programmer.inf"></File></Folder><Folder name="HIDReportViewer"><File path="Projects\HIDReportViewer\HIDReportViewer.c"></File><File path="Projects\HIDReportViewer\HIDReportViewer.h"></File><File path="Projects\HIDReportViewer\makefile"></File><File path="Projects\HIDReportViewer\HIDReportViewer.txt"></File><File path="Projects\HIDReportViewer\Doxygen.conf"></File></Folder><Folder name="LEDNotifier"><Folder name="CPUUsageApp"><File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.cs"></File><File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.csproj"></File><File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.Designer.cs"></File><File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.resx"></File><File path="Projects\LEDNotifier\CPUUsageApp\Program.cs"></File></Folder><Folder name="HotmailNotifierApp"><File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.cs"></File><File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.csproj"></File><File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.Designer.cs"></File><File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.resx"></File><File path="Projects\LEDNotifier\HotmailNotifierApp\Program.cs"></File></Folder><Folder name="LEDMixerApp"><File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.cs"></File><File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.csproj"></File><File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.Designer.cs"></File><File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.resx"></File><File path="Projects\LEDNotifier\LEDMixerApp\Program.cs"></File></Folder><File path="Projects\LEDNotifier\Descriptors.c"></File><File path="Projects\LEDNotifier\Descriptors.h"></File><File path="Projects\LEDNotifier\Doxygen.conf"></File><File path="Projects\LEDNotifier\LEDNotifier.c"></File><File path="Projects\LEDNotifier\LEDNotifier.h"></File><File path="Projects\LEDNotifier\LEDNotifier.txt"></File><File path="Projects\LEDNotifier\LUFA LED Notifier.inf"></File><File path="Projects\LEDNotifier\makefile"></File></Folder><Folder name="MagStripe"><Folder name="Lib"><File path="Projects\Magstripe\Lib\CircularBitBuffer.c"></File><File path="Projects\Magstripe\Lib\CircularBitBuffer.h"></File><File path="Projects\Magstripe\Lib\MagstripeHW.h"></File></Folder><File path="Projects\Magstripe\Descriptors.c"></File><File path="Projects\Magstripe\Descriptors.h"></File><File path="Projects\Magstripe\Magstripe.c"></File><File path="Projects\Magstripe\Magstripe.h"></File><File path="Projects\Magstripe\makefile"></File><File path="Projects\Magstripe\Magstripe.txt"></File><File path="Projects\Magstripe\Doxygen.conf"></File></Folder><Folder name="MediaController"><File path="Projects\MediaController\Descriptors.c"></File><File path="Projects\MediaController\Descriptors.h"></File><File path="Projects\MediaController\Doxygen.conf"></File><File path="Projects\MediaController\makefile"></File><File path="Projects\MediaController\MediaController.c"></File><File path="Projects\MediaController\MediaController.h"></File><File path="Projects\MediaController\MediaController.txt"></File></Folder><Folder name="MIDIToneGenerator"><File path="Projects\MIDIToneGenerator\Descriptors.c"></File><File path="Projects\MIDIToneGenerator\Descriptors.h"></File><File path="Projects\MIDIToneGenerator\makefile"></File><File path="Projects\MIDIToneGenerator\MIDIToneGenerator.c"></File><File path="Projects\MIDIToneGenerator\MIDIToneGenerator.h"></File><File path="Projects\MIDIToneGenerator\MIDIToneGenerator.txt"></File><File path="Projects\MIDIToneGenerator\Doxygen.conf"></File></Folder><Folder name="MissileLauncher"><File path="Projects\MissileLauncher\ConfigDescriptor.c"></File><File path="Projects\MissileLauncher\ConfigDescriptor.h"></File><File path="Projects\MissileLauncher\Doxygen.conf"></File><File path="Projects\MissileLauncher\makefile"></File><File path="Projects\MissileLauncher\MissileLauncher.c"></File><File path="Projects\MissileLauncher\MissileLauncher.h"></File><File path="Projects\MissileLauncher\MissileLauncher.txt"></File></Folder><Folder name="RelayBoard"><File path="Projects\RelayBoard\Descriptors.c"></File><File path="Projects\RelayBoard\Descriptors.h"></File><File path="Projects\RelayBoard\Doxygen.conf"></File><File path="Projects\RelayBoard\makefile"></File><File path="Projects\RelayBoard\RelayBoard.c"></File><File path="Projects\RelayBoard\RelayBoard.h"></File><File path="Projects\RelayBoard\RelayBoard.txt"></File></Folder><Folder name="SerialToLCD"><Folder name="Lib"><File path="Projects\SerialToLCD\Lib\HD44780.c"></File><File path="Projects\SerialToLCD\Lib\HD44780.h"></File></Folder><File path="Projects\SerialToLCD\Descriptors.c"></File><File path="Projects\SerialToLCD\Descriptors.h"></File><File path="Projects\SerialToLCD\makefile"></File><File path="Projects\SerialToLCD\SerialToLCD.c"></File><File path="Projects\SerialToLCD\SerialToLCD.h"></File><File path="Projects\SerialToLCD\SerialToLCD.txt"></File><File path="Projects\SerialToLCD\Doxygen.conf"></File></Folder><Folder name="TempDataLogger"><Folder name="Lib"><Folder name="FATFs"><File path="Projects\TempDataLogger\Lib\FATFs\diskio.c"></File><File path="Projects\TempDataLogger\Lib\FATFs\diskio.h"></File><File path="Projects\TempDataLogger\Lib\FATFs\ff.c"></File><File path="Projects\TempDataLogger\Lib\FATFs\ff.h"></File><File path="Projects\TempDataLogger\Lib\FATFs\ffconf.h"></File><File path="Projects\TempDataLogger\Lib\FATFs\integer.h"></File></Folder><File path="Projects\TempDataLogger\Lib\DataflashManager.c"></File><File path="Projects\TempDataLogger\Lib\DataflashManager.h"></File><File path="Projects\TempDataLogger\Lib\DS1307.c"></File><File path="Projects\TempDataLogger\Lib\DS1307.h"></File><File path="Projects\TempDataLogger\Lib\SCSI.c"></File><File path="Projects\TempDataLogger\Lib\SCSI.h"></File></Folder><Folder name="TempLogHostApp"><File path="Projects\TempDataLogger\TempLogHostApp\DataLoggerSettings.cs"></File><File path="Projects\TempDataLogger\TempLogHostApp\DataLoggerSettings.Designer.cs"></File><File path="Projects\TempDataLogger\TempLogHostApp\DataLoggerSettings.resx"></File><File path="Projects\TempDataLogger\TempLogHostApp\Program.cs"></File><File path="Projects\TempDataLogger\TempLogHostApp\TempLoggerHostApp.csproj"></File></Folder><File path="Projects\TempDataLogger\Descriptors.c"></File><File path="Projects\TempDataLogger\Descriptors.h"></File><File path="Projects\TempDataLogger\Doxygen.conf"></File><File path="Projects\TempDataLogger\makefile"></File><File path="Projects\TempDataLogger\TempDataLogger.c"></File><File path="Projects\TempDataLogger\TempDataLogger.h"></File><File path="Projects\TempDataLogger\TemperatureDataLogger.txt"></File></Folder><Folder name="USBtoSerial"><File path="Projects\USBtoSerial\Descriptors.h"></File><File path="Projects\USBtoSerial\Doxygen.conf"></File><File path="Projects\USBtoSerial\LUFA USBtoSerial.inf"></File><File path="Projects\USBtoSerial\makefile"></File><File path="Projects\USBtoSerial\USBtoSerial.c"></File><File path="Projects\USBtoSerial\USBtoSerial.h"></File><File path="Projects\USBtoSerial\USBtoSerial.txt"></File><File path="Projects\USBtoSerial\Descriptors.c"></File></Folder><Folder name="Webserver"><Folder name="Lib"><Folder name="uip"><File path="Projects\Webserver\Lib\uip\clock.c"></File><File path="Projects\Webserver\Lib\uip\clock.h"></File><File path="Projects\Webserver\Lib\uip\timer.c"></File><File path="Projects\Webserver\Lib\uip\timer.h"></File><File path="Projects\Webserver\Lib\uip\uip.c"></File><File path="Projects\Webserver\Lib\uip\uip.h"></File><File path="Projects\Webserver\Lib\uip\uip_arp.c"></File><File path="Projects\Webserver\Lib\uip\uip_arp.h"></File><File path="Projects\Webserver\Lib\uip\uipopt.h"></File><File path="Projects\Webserver\Lib\uip\uip-split.c"></File><File path="Projects\Webserver\Lib\uip\uip-split.h"></File></Folder><Folder name="FATFs"><File path="Projects\Webserver\Lib\FATFs\diskio.c"></File><File path="Projects\Webserver\Lib\FATFs\diskio.h"></File><File path="Projects\Webserver\Lib\FATFs\ff.c"></File><File path="Projects\Webserver\Lib\FATFs\ff.h"></File><File path="Projects\Webserver\Lib\FATFs\ffconf.h"></File><File path="Projects\Webserver\Lib\FATFs\integer.h"></File></Folder><File path="Projects\Webserver\Lib\DataflashManager.c"></File><File path="Projects\Webserver\Lib\DataflashManager.h"></File><File path="Projects\Webserver\Lib\uIPManagement.c"></File><File path="Projects\Webserver\Lib\uIPManagement.h"></File><File path="Projects\Webserver\Lib\HTTPServerApp.c"></File><File path="Projects\Webserver\Lib\HTTPServerApp.h"></File><File path="Projects\Webserver\Lib\SCSI.c"></File><File path="Projects\Webserver\Lib\SCSI.h"></File><File path="Projects\Webserver\Lib\TELNETServerApp.c"></File><File path="Projects\Webserver\Lib\TELNETServerApp.h"></File><File path="Projects\Webserver\Lib\DHCPClientApp.c"></File><File path="Projects\Webserver\Lib\DHCPClientApp.h"></File><File path="Projects\Webserver\Lib\DHCPCommon.h"></File><File path="Projects\Webserver\Lib\DHCPServerApp.c"></File><File path="Projects\Webserver\Lib\DHCPServerApp.h"></File><File path="Projects\Webserver\Lib\DHCPCommon.c"></File></Folder><File path="Projects\Webserver\makefile"></File><File path="Projects\Webserver\Webserver.c"></File><File path="Projects\Webserver\Webserver.h"></File><File path="Projects\Webserver\Doxygen.conf"></File><File path="Projects\Webserver\Webserver.txt"></File><File path="Projects\Webserver\Descriptors.c"></File><File path="Projects\Webserver\Descriptors.h"></File><File path="Projects\Webserver\USBHostMode.c"></File><File path="Projects\Webserver\USBHostMode.h"></File><File path="Projects\Webserver\USBDeviceMode.c"></File><File path="Projects\Webserver\USBDeviceMode.h"></File><File path="Projects\Webserver\LUFA Webserver RNDIS.inf"></File></Folder><Folder name="XPLAINBridge"><Folder name="Lib"><File path="Projects\XPLAINBridge\Lib\SoftUART.c"></File><File path="Projects\XPLAINBridge\Lib\SoftUART.h"></File></Folder><File path="Projects\XPLAINBridge\XPLAINBridge.txt"></File><File path="Projects\XPLAINBridge\XPLAINBridge.h"></File><File path="Projects\XPLAINBridge\XPLAINBridge.c"></File><File path="Projects\XPLAINBridge\USARTDescriptors.h"></File><File path="Projects\XPLAINBridge\USARTDescriptors.c"></File><File path="Projects\XPLAINBridge\makefile"></File><File path="Projects\XPLAINBridge\LUFA XPLAIN Bridge.inf"></File><File path="Projects\XPLAINBridge\Doxygen.conf"></File></Folder><Folder name="Incomplete"><Folder name="StandaloneProgrammer"><Folder name="Lib"><Folder name="PetiteFATFs"><File path="Projects\Incomplete\StandaloneProgrammer\Lib\PetiteFATFs\diskio.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\PetiteFATFs\diskio.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\PetiteFATFs\integer.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\PetiteFATFs\pff.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\PetiteFATFs\pff.h"></File></Folder><File path="Projects\Incomplete\StandaloneProgrammer\Lib\DataflashManager.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\DataflashManager.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\SCSI.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\SCSI.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\ProgrammerConfig.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\Lib\ProgrammerConfig.h"></File></Folder><File path="Projects\Incomplete\StandaloneProgrammer\Descriptors.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\Descriptors.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\makefile"></File><File path="Projects\Incomplete\StandaloneProgrammer\StandaloneProgrammer.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\StandaloneProgrammer.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\DiskDevice.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\DiskDevice.h"></File><File path="Projects\Incomplete\StandaloneProgrammer\DiskHost.c"></File><File path="Projects\Incomplete\StandaloneProgrammer\DiskHost.h"></File></Folder></Folder><File path="Projects\makefile"></File></Folder><Folder name="BuildTests"><Folder name="BoardDriverTest"><Folder name="Board"><File path="BuildTests\BoardDriverTest\Board\Buttons.h"></File><File path="BuildTests\BoardDriverTest\Board\Dataflash.h"></File><File path="BuildTests\BoardDriverTest\Board\Joystick.h"></File><File path="BuildTests\BoardDriverTest\Board\LEDs.h"></File></Folder><File path="BuildTests\BoardDriverTest\BoardDeviceMap.cfg"></File><File path="BuildTests\BoardDriverTest\makefile"></File><File path="BuildTests\BoardDriverTest\makefile.avr8"></File><File path="BuildTests\BoardDriverTest\makefile.uc3"></File><File path="BuildTests\BoardDriverTest\makefile.xmega"></File><File path="BuildTests\BoardDriverTest\Test.c"></File></Folder><Folder name="BootloaderTest"><File path="BuildTests\BootloaderTest\BootloaderDeviceMap.cfg"></File><File path="BuildTests\BootloaderTest\makefile"></File></Folder><Folder name="ModuleTest"><File path="BuildTests\ModuleTest\makefile"></File><File path="BuildTests\ModuleTest\makefile.avr8"></File><File path="BuildTests\ModuleTest\makefile.uc3"></File><File path="BuildTests\ModuleTest\makefile.xmega"></File><File path="BuildTests\ModuleTest\Modules.h"></File><File path="BuildTests\ModuleTest\Test_C.c"></File><File path="BuildTests\ModuleTest\Test_CPP.cpp"></File><File path="BuildTests\ModuleTest\Dummy.S"></File></Folder><Folder name="SingleUSBModeTest"><File path="BuildTests\SingleUSBModeTest\makefile"></File><File path="BuildTests\SingleUSBModeTest\makefile.avr8"></File><File path="BuildTests\SingleUSBModeTest\makefile.uc3"></File><File path="BuildTests\SingleUSBModeTest\makefile.xmega"></File><File path="BuildTests\SingleUSBModeTest\Test.c"></File><File path="BuildTests\SingleUSBModeTest\Dummy.S"></File></Folder><Folder name="StaticAnalysisTest"><File path="BuildTests\StaticAnalysisTest\makefile"></File></Folder><File path="BuildTests\makefile"></File></Folder><Folder name="Maintenance"><File path="Maintenance\makefile"></File><File path="Maintenance\AS4Template.aps"></File></Folder><File path="makefile"></File><File path="README.txt"></File></Project>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<Project name="LUFA">
+ <Folder name="Demos">
+ <Folder name="Device">
+ <Folder name="ClassDriver">
+ <Folder name="AudioInput">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\AudioInput\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\AudioInput\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\AudioInput\AudioInput.c" />
+ <File path="Demos\Device\ClassDriver\AudioInput\AudioInput.h" />
+ <File path="Demos\Device\ClassDriver\AudioInput\AudioInput.txt" />
+ <File path="Demos\Device\ClassDriver\AudioInput\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\AudioInput\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\AudioInput\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\AudioInput\makefile" />
+ </Folder>
+ <Folder name="AudioOutput">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\AudioOutput\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\AudioOutput\AudioOutput.c" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\AudioOutput.h" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\AudioOutput.txt" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\AudioOutput\makefile" />
+ </Folder>
+ <Folder name="DualVirtualSerial">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\DualVirtualSerial.c" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\DualVirtualSerial.h" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\DualVirtualSerial.txt" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\LUFA DualVirtualSerial.inf" />
+ <File path="Demos\Device\ClassDriver\DualVirtualSerial\makefile" />
+ </Folder>
+ <Folder name="GenericHID">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\GenericHID\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\GenericHID\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\GenericHID\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\GenericHID\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\GenericHID\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\GenericHID\GenericHID.c" />
+ <File path="Demos\Device\ClassDriver\GenericHID\GenericHID.h" />
+ <File path="Demos\Device\ClassDriver\GenericHID\GenericHID.txt" />
+ <File path="Demos\Device\ClassDriver\GenericHID\makefile" />
+ </Folder>
+ <Folder name="Joystick">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\Joystick\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\Joystick\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\Joystick\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\Joystick\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\Joystick\Joystick.c" />
+ <File path="Demos\Device\ClassDriver\Joystick\Joystick.h" />
+ <File path="Demos\Device\ClassDriver\Joystick\Joystick.txt" />
+ <File path="Demos\Device\ClassDriver\Joystick\makefile" />
+ </Folder>
+ <Folder name="Keyboard">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\Keyboard\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\Keyboard\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\Keyboard\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\Keyboard\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\Keyboard\Keyboard.c" />
+ <File path="Demos\Device\ClassDriver\Keyboard\Keyboard.h" />
+ <File path="Demos\Device\ClassDriver\Keyboard\Keyboard.txt" />
+ <File path="Demos\Device\ClassDriver\Keyboard\makefile" />
+ </Folder>
+ <Folder name="KeyboardMouse">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\KeyboardMouse.c" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\KeyboardMouse.h" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\KeyboardMouse.txt" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouse\makefile" />
+ </Folder>
+ <Folder name="KeyboardMouseMultiReport">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\KeyboardMouseMultiReport.c" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\KeyboardMouseMultiReport.h" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\KeyboardMouseMultiReport.txt" />
+ <File path="Demos\Device\ClassDriver\KeyboardMouseMultiReport\makefile" />
+ </Folder>
+ <Folder name="MassStorage">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\MassStorage\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\MassStorage\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\ClassDriver\MassStorage\Lib\DataflashManager.c" />
+ <File path="Demos\Device\ClassDriver\MassStorage\Lib\DataflashManager.h" />
+ <File path="Demos\Device\ClassDriver\MassStorage\Lib\SCSI.c" />
+ <File path="Demos\Device\ClassDriver\MassStorage\Lib\SCSI.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\MassStorage\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\MassStorage\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\MassStorage\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\MassStorage\makefile" />
+ <File path="Demos\Device\ClassDriver\MassStorage\MassStorage.c" />
+ <File path="Demos\Device\ClassDriver\MassStorage\MassStorage.h" />
+ <File path="Demos\Device\ClassDriver\MassStorage\MassStorage.txt" />
+ </Folder>
+ <Folder name="MassStorageKeyboard">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\DataflashManager.c" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\DataflashManager.h" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\SCSI.c" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Lib\SCSI.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\makefile" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\MassStorageKeyboard.c" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\MassStorageKeyboard.h" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\MassStorageKeyboard\MassStorageKeyboard.txt" />
+ </Folder>
+ <Folder name="MIDI">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\MIDI\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\MIDI\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\MIDI\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\MIDI\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\MIDI\makefile" />
+ <File path="Demos\Device\ClassDriver\MIDI\MIDI.c" />
+ <File path="Demos\Device\ClassDriver\MIDI\MIDI.h" />
+ <File path="Demos\Device\ClassDriver\MIDI\MIDI.txt" />
+ </Folder>
+ <Folder name="Mouse">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\Mouse\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\Mouse\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\Mouse\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\Mouse\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\Mouse\makefile" />
+ <File path="Demos\Device\ClassDriver\Mouse\Mouse.c" />
+ <File path="Demos\Device\ClassDriver\Mouse\Mouse.h" />
+ <File path="Demos\Device\ClassDriver\Mouse\Mouse.txt" />
+ </Folder>
+ <Folder name="RNDISEthernet">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Webserver.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ARP.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ARP.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\DHCP.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\DHCP.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Ethernet.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Ethernet.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\EthernetProtocols.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ICMP.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ICMP.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\IP.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\IP.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ProtocolDecoders.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\ProtocolDecoders.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\TCP.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\TCP.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\UDP.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\UDP.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Lib\Webserver.c" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\LUFA RNDIS.inf" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\makefile" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\RNDISEthernet.c" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\RNDISEthernet.h" />
+ <File path="Demos\Device\ClassDriver\RNDISEthernet\RNDISEthernet.txt" />
+ </Folder>
+ <Folder name="VirtualSerial">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\VirtualSerial\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\VirtualSerial\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\LUFA VirtualSerial.inf" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\makefile" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\VirtualSerial.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\VirtualSerial.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerial\VirtualSerial.txt" />
+ </Folder>
+ <Folder name="VirtualSerialMassStorage">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Config\LUFAConfig.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\DataflashManager.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\DataflashManager.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\SCSI.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Lib\SCSI.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\LUFA VirtualSerialMassStorage.inf" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\makefile" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\VirtualSerialMassStorage.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\VirtualSerialMassStorage.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\VirtualSerialMassStorage.txt" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMassStorage\Descriptors.h" />
+ </Folder>
+ <Folder name="VirtualSerialMouse">
+ <Folder name="Config">
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\Descriptors.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\Descriptors.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\Doxygen.conf" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\LUFA VirtualSerialMouse.inf" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\makefile" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\VirtualSerialMouse.c" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\VirtualSerialMouse.h" />
+ <File path="Demos\Device\ClassDriver\VirtualSerialMouse\VirtualSerialMouse.txt" />
+ </Folder>
+ <File path="Demos\Device\ClassDriver\makefile" />
+ </Folder>
+ <Folder name="LowLevel">
+ <Folder name="AudioInput">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\AudioInput\Config\LUFAConfig.h" />
+ <File path="Demos\Device\LowLevel\AudioInput\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\AudioInput\AudioInput.c" />
+ <File path="Demos\Device\LowLevel\AudioInput\AudioInput.h" />
+ <File path="Demos\Device\LowLevel\AudioInput\AudioInput.txt" />
+ <File path="Demos\Device\LowLevel\AudioInput\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\AudioInput\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\AudioInput\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\AudioInput\makefile" />
+ </Folder>
+ <Folder name="AudioOutput">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\AudioOutput\Config\LUFAConfig.h" />
+ <File path="Demos\Device\LowLevel\AudioOutput\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\AudioOutput\AudioOutput.c" />
+ <File path="Demos\Device\LowLevel\AudioOutput\AudioOutput.h" />
+ <File path="Demos\Device\LowLevel\AudioOutput\AudioOutput.txt" />
+ <File path="Demos\Device\LowLevel\AudioOutput\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\AudioOutput\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\AudioOutput\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\AudioOutput\makefile" />
+ </Folder>
+ <Folder name="DualVirtualSerial">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\DualVirtualSerial.c" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\DualVirtualSerial.h" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\DualVirtualSerial.txt" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\LUFA DualVirtualSerial.inf" />
+ <File path="Demos\Device\LowLevel\DualVirtualSerial\makefile" />
+ </Folder>
+ <Folder name="GenericHID">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\GenericHID\Config\LUFAConfig.h" />
+ <File path="Demos\Device\LowLevel\GenericHID\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\GenericHID\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\GenericHID\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\GenericHID\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\GenericHID\GenericHID.c" />
+ <File path="Demos\Device\LowLevel\GenericHID\GenericHID.h" />
+ <File path="Demos\Device\LowLevel\GenericHID\GenericHID.txt" />
+ <File path="Demos\Device\LowLevel\GenericHID\makefile" />
+ </Folder>
+ <Folder name="Joystick">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\Joystick\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\Joystick\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\Joystick\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\Joystick\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\Joystick\Joystick.c" />
+ <File path="Demos\Device\LowLevel\Joystick\Joystick.h" />
+ <File path="Demos\Device\LowLevel\Joystick\Joystick.txt" />
+ <File path="Demos\Device\LowLevel\Joystick\makefile" />
+ </Folder>
+ <Folder name="Keyboard">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\Keyboard\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\Keyboard\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\Keyboard\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\Keyboard\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\Keyboard\Keyboard.c" />
+ <File path="Demos\Device\LowLevel\Keyboard\Keyboard.h" />
+ <File path="Demos\Device\LowLevel\Keyboard\Keyboard.txt" />
+ <File path="Demos\Device\LowLevel\Keyboard\makefile" />
+ </Folder>
+ <Folder name="KeyboardMouse">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\KeyboardMouse\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\KeyboardMouse\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\KeyboardMouse\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\KeyboardMouse\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\KeyboardMouse\KeyboardMouse.c" />
+ <File path="Demos\Device\LowLevel\KeyboardMouse\KeyboardMouse.h" />
+ <File path="Demos\Device\LowLevel\KeyboardMouse\KeyboardMouse.txt" />
+ <File path="Demos\Device\LowLevel\KeyboardMouse\makefile" />
+ </Folder>
+ <Folder name="MassStorage">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\MassStorage\Config\LUFAConfig.h" />
+ <File path="Demos\Device\LowLevel\MassStorage\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\LowLevel\MassStorage\Lib\DataflashManager.c" />
+ <File path="Demos\Device\LowLevel\MassStorage\Lib\DataflashManager.h" />
+ <File path="Demos\Device\LowLevel\MassStorage\Lib\SCSI.c" />
+ <File path="Demos\Device\LowLevel\MassStorage\Lib\SCSI.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\MassStorage\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\MassStorage\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\MassStorage\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\MassStorage\makefile" />
+ <File path="Demos\Device\LowLevel\MassStorage\MassStorage.c" />
+ <File path="Demos\Device\LowLevel\MassStorage\MassStorage.h" />
+ <File path="Demos\Device\LowLevel\MassStorage\MassStorage.txt" />
+ </Folder>
+ <Folder name="MIDI">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\MIDI\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\MIDI\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\MIDI\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\MIDI\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\MIDI\makefile" />
+ <File path="Demos\Device\LowLevel\MIDI\MIDI.c" />
+ <File path="Demos\Device\LowLevel\MIDI\MIDI.h" />
+ <File path="Demos\Device\LowLevel\MIDI\MIDI.txt" />
+ </Folder>
+ <Folder name="Mouse">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\Mouse\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\Mouse\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\Mouse\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\Mouse\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\Mouse\makefile" />
+ <File path="Demos\Device\LowLevel\Mouse\Mouse.c" />
+ <File path="Demos\Device\LowLevel\Mouse\Mouse.h" />
+ <File path="Demos\Device\LowLevel\Mouse\Mouse.txt" />
+ </Folder>
+ <Folder name="RNDISEthernet">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Config\LUFAConfig.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Webserver.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ARP.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ARP.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\DHCP.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\DHCP.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Ethernet.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Ethernet.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\EthernetProtocols.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ICMP.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ICMP.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\IP.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\IP.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ProtocolDecoders.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\ProtocolDecoders.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\RNDIS.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\RNDIS.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\TCP.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\TCP.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\UDP.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\UDP.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Lib\Webserver.c" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\LUFA RNDIS.inf" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\makefile" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\RNDISEthernet.c" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\RNDISEthernet.h" />
+ <File path="Demos\Device\LowLevel\RNDISEthernet\RNDISEthernet.txt" />
+ </Folder>
+ <Folder name="VirtualSerial">
+ <Folder name="Config">
+ <File path="Demos\Device\LowLevel\VirtualSerial\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\VirtualSerial\Descriptors.c" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\Descriptors.h" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\Doxygen.conf" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\LUFA VirtualSerial.inf" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\makefile" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\VirtualSerial.c" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\VirtualSerial.h" />
+ <File path="Demos\Device\LowLevel\VirtualSerial\VirtualSerial.txt" />
+ </Folder>
+ <File path="Demos\Device\LowLevel\makefile" />
+ </Folder>
+ <Folder name="Incomplete">
+ <Folder name="SideShow">
+ <Folder name="Config">
+ <File path="Demos\Device\Incomplete\Sideshow\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowApplications.c" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowApplications.h" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommands.c" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommands.h" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommon.c" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowCommon.h" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowContent.c" />
+ <File path="Demos\Device\Incomplete\Sideshow\Lib\SideshowContent.h" />
+ </Folder>
+ <File path="Demos\Device\Incomplete\Sideshow\Descriptors.c" />
+ <File path="Demos\Device\Incomplete\Sideshow\Descriptors.h" />
+ <File path="Demos\Device\Incomplete\Sideshow\makefile" />
+ <File path="Demos\Device\Incomplete\Sideshow\Sideshow.c" />
+ <File path="Demos\Device\Incomplete\Sideshow\Sideshow.h" />
+ </Folder>
+ <Folder name="TestAndMeasurement">
+ <Folder name="Config">
+ <File path="Demos\Device\Incomplete\TestAndMeasurement\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Device\Incomplete\TestAndMeasurement\Descriptors.c" />
+ <File path="Demos\Device\Incomplete\TestAndMeasurement\Descriptors.h" />
+ <File path="Demos\Device\Incomplete\TestAndMeasurement\TestAndMeasurement.c" />
+ <File path="Demos\Device\Incomplete\TestAndMeasurement\TestAndMeasurement.h" />
+ <File path="Demos\Device\Incomplete\TestAndMeasurement\makefile" />
+ </Folder>
+ </Folder>
+ <File path="Demos\Device\makefile" />
+ </Folder>
+ <Folder name="Host">
+ <Folder name="ClassDriver">
+ <Folder name="AndroidAccessoryHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\AndroidAccessoryHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\AndroidAccessoryHost\AndroidAccessoryHost.c" />
+ <File path="Demos\Host\ClassDriver\AndroidAccessoryHost\AndroidAccessoryHost.h" />
+ <File path="Demos\Host\ClassDriver\AndroidAccessoryHost\AndroidAccessoryHost.txt" />
+ <File path="Demos\Host\ClassDriver\AndroidAccessoryHost\makefile" />
+ <File path="Demos\Host\ClassDriver\AndroidAccessoryHost\Doxygen.conf" />
+ </Folder>
+ <Folder name="AudioInputHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\AudioInputHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\AudioInputHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\AudioInputHost\makefile" />
+ <File path="Demos\Host\ClassDriver\AudioInputHost\AudioInputHost.c" />
+ <File path="Demos\Host\ClassDriver\AudioInputHost\AudioInputHost.h" />
+ <File path="Demos\Host\ClassDriver\AudioInputHost\AudioInputHost.txt" />
+ </Folder>
+ <Folder name="AudioOutputHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\Config\LUFAConfig.h" />
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\AudioOutputHost.c" />
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\AudioOutputHost.h" />
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\makefile" />
+ <File path="Demos\Host\ClassDriver\AudioOutputHost\AudioOutputHost.txt" />
+ </Folder>
+ <Folder name="JoystickHostWithParser">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\JoystickHostWithParser\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\JoystickHostWithParser\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\JoystickHostWithParser\JoystickHostWithParser.c" />
+ <File path="Demos\Host\ClassDriver\JoystickHostWithParser\JoystickHostWithParser.h" />
+ <File path="Demos\Host\ClassDriver\JoystickHostWithParser\JoystickHostWithParser.txt" />
+ <File path="Demos\Host\ClassDriver\JoystickHostWithParser\makefile" />
+ </Folder>
+ <Folder name="KeyboardHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\KeyboardHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\KeyboardHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\KeyboardHost\KeyboardHost.c" />
+ <File path="Demos\Host\ClassDriver\KeyboardHost\KeyboardHost.h" />
+ <File path="Demos\Host\ClassDriver\KeyboardHost\makefile" />
+ <File path="Demos\Host\ClassDriver\KeyboardHost\KeyboardHost.txt" />
+ </Folder>
+ <Folder name="KeyboardHostWithParser">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\KeyboardHostWithParser\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\KeyboardHostWithParser\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\KeyboardHostWithParser\KeyboardHostWithParser.c" />
+ <File path="Demos\Host\ClassDriver\KeyboardHostWithParser\KeyboardHostWithParser.h" />
+ <File path="Demos\Host\ClassDriver\KeyboardHostWithParser\makefile" />
+ <File path="Demos\Host\ClassDriver\KeyboardHostWithParser\KeyboardHostWithParser.txt" />
+ </Folder>
+ <Folder name="MassStorageHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\MassStorageHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\MassStorageHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\MassStorageHost\makefile" />
+ <File path="Demos\Host\ClassDriver\MassStorageHost\MassStorageHost.c" />
+ <File path="Demos\Host\ClassDriver\MassStorageHost\MassStorageHost.h" />
+ <File path="Demos\Host\ClassDriver\MassStorageHost\MassStorageHost.txt" />
+ </Folder>
+ <Folder name="MIDIHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\MIDIHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\MIDIHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\MIDIHost\makefile" />
+ <File path="Demos\Host\ClassDriver\MIDIHost\MIDIHost.c" />
+ <File path="Demos\Host\ClassDriver\MIDIHost\MIDIHost.h" />
+ <File path="Demos\Host\ClassDriver\MIDIHost\MIDIHost.txt" />
+ </Folder>
+ <Folder name="MouseHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\MouseHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\MouseHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\MouseHost\makefile" />
+ <File path="Demos\Host\ClassDriver\MouseHost\MouseHost.c" />
+ <File path="Demos\Host\ClassDriver\MouseHost\MouseHost.h" />
+ <File path="Demos\Host\ClassDriver\MouseHost\MouseHost.txt" />
+ </Folder>
+ <Folder name="MouseHostWithParser">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\MouseHostWithParser\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\MouseHostWithParser\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\MouseHostWithParser\makefile" />
+ <File path="Demos\Host\ClassDriver\MouseHostWithParser\MouseHostWithParser.txt" />
+ <File path="Demos\Host\ClassDriver\MouseHostWithParser\MouseHostWithParser.c" />
+ <File path="Demos\Host\ClassDriver\MouseHostWithParser\MouseHostWithParser.h" />
+ </Folder>
+ <Folder name="PrinterHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\PrinterHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\PrinterHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\PrinterHost\makefile" />
+ <File path="Demos\Host\ClassDriver\PrinterHost\PrinterHost.c" />
+ <File path="Demos\Host\ClassDriver\PrinterHost\PrinterHost.h" />
+ <File path="Demos\Host\ClassDriver\PrinterHost\PrinterHost.txt" />
+ </Folder>
+ <Folder name="RNDISEthernetHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\RNDISEthernetHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\RNDISEthernetHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\RNDISEthernetHost\makefile" />
+ <File path="Demos\Host\ClassDriver\RNDISEthernetHost\RNDISEthernetHost.c" />
+ <File path="Demos\Host\ClassDriver\RNDISEthernetHost\RNDISEthernetHost.h" />
+ <File path="Demos\Host\ClassDriver\RNDISEthernetHost\RNDISEthernetHost.txt" />
+ </Folder>
+ <Folder name="StillImageHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\StillImageHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\StillImageHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\StillImageHost\makefile" />
+ <File path="Demos\Host\ClassDriver\StillImageHost\StillImageHost.c" />
+ <File path="Demos\Host\ClassDriver\StillImageHost\StillImageHost.h" />
+ <File path="Demos\Host\ClassDriver\StillImageHost\StillImageHost.txt" />
+ </Folder>
+ <Folder name="VirtualSerialHost">
+ <Folder name="Config">
+ <File path="Demos\Host\ClassDriver\VirtualSerialHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\VirtualSerialHost\Doxygen.conf" />
+ <File path="Demos\Host\ClassDriver\VirtualSerialHost\makefile" />
+ <File path="Demos\Host\ClassDriver\VirtualSerialHost\VirtualSerialHost.c" />
+ <File path="Demos\Host\ClassDriver\VirtualSerialHost\VirtualSerialHost.h" />
+ <File path="Demos\Host\ClassDriver\VirtualSerialHost\VirtualSerialHost.txt" />
+ </Folder>
+ <File path="Demos\Host\ClassDriver\makefile" />
+ </Folder>
+ <Folder name="LowLevel">
+ <Folder name="AndroidAccessoryHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\Lib\AndroidAccessoryCommands.c" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\Lib\AndroidAccessoryCommands.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\AndroidAccessoryHost.c" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\AndroidAccessoryHost.h" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\DeviceDescriptor.c" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\DeviceDescriptor.h" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\makefile" />
+ <File path="Demos\Host\LowLevel\AndroidAccessoryHost\AndroidAccessoryHost.txt" />
+ </Folder>
+ <Folder name="AudioInputHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\AudioInputHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\AudioInputHost\AudioInputHost.c" />
+ <File path="Demos\Host\LowLevel\AudioInputHost\AudioInputHost.h" />
+ <File path="Demos\Host\LowLevel\AudioInputHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\AudioInputHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\AudioInputHost\makefile" />
+ <File path="Demos\Host\LowLevel\AudioInputHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\AudioInputHost\AudioInputHost.txt" />
+ </Folder>
+ <Folder name="AudioOutputHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\AudioOutputHost\Config\LUFAConfig.h" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\Config\AppConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\AudioOutputHost\AudioOutputHost.c" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\AudioOutputHost.h" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\makefile" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\AudioOutputHost\AudioOutputHost.txt" />
+ </Folder>
+ <Folder name="GenericHIDHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\GenericHIDHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\GenericHIDHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\GenericHIDHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\GenericHIDHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\GenericHIDHost\GenericHIDHost.c" />
+ <File path="Demos\Host\LowLevel\GenericHIDHost\GenericHIDHost.h" />
+ <File path="Demos\Host\LowLevel\GenericHIDHost\GenericHIDHost.txt" />
+ <File path="Demos\Host\LowLevel\GenericHIDHost\makefile" />
+ </Folder>
+ <Folder name="JoystickHostWithParser">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\HIDReport.c" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\HIDReport.h" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\JoystickHostWithParser.c" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\JoystickHostWithParser.h" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\JoystickHostWithParser.txt" />
+ <File path="Demos\Host\LowLevel\JoystickHostWithParser\makefile" />
+ </Folder>
+ <Folder name="KeyboardHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\KeyboardHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\KeyboardHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\KeyboardHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\KeyboardHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\KeyboardHost\KeyboardHost.c" />
+ <File path="Demos\Host\LowLevel\KeyboardHost\KeyboardHost.h" />
+ <File path="Demos\Host\LowLevel\KeyboardHost\KeyboardHost.txt" />
+ <File path="Demos\Host\LowLevel\KeyboardHost\makefile" />
+ </Folder>
+ <Folder name="KeyboardHostWithParser">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\makefile" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\HIDReport.c" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\HIDReport.h" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\KeyboardHostWithParser.c" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\KeyboardHostWithParser.h" />
+ <File path="Demos\Host\LowLevel\KeyboardHostWithParser\KeyboardHostWithParser.txt" />
+ </Folder>
+ <Folder name="MassStorageHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\MassStorageHost\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Host\LowLevel\MassStorageHost\Lib\MassStoreCommands.c" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\Lib\MassStoreCommands.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\MassStorageHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\makefile" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\MassStorageHost.c" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\MassStorageHost.h" />
+ <File path="Demos\Host\LowLevel\MassStorageHost\MassStorageHost.txt" />
+ </Folder>
+ <Folder name="MIDIHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\MIDIHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\MIDIHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\MIDIHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\MIDIHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\MIDIHost\makefile" />
+ <File path="Demos\Host\LowLevel\MIDIHost\MIDIHost.c" />
+ <File path="Demos\Host\LowLevel\MIDIHost\MIDIHost.h" />
+ <File path="Demos\Host\LowLevel\MIDIHost\MIDIHost.txt" />
+ </Folder>
+ <Folder name="MouseHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\MouseHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\MouseHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\MouseHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\MouseHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\MouseHost\makefile" />
+ <File path="Demos\Host\LowLevel\MouseHost\MouseHost.c" />
+ <File path="Demos\Host\LowLevel\MouseHost\MouseHost.h" />
+ <File path="Demos\Host\LowLevel\MouseHost\MouseHost.txt" />
+ </Folder>
+ <Folder name="MouseHostWithParser">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\MouseHostWithParser.txt" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\HIDReport.c" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\HIDReport.h" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\makefile" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\MouseHostWithParser.c" />
+ <File path="Demos\Host\LowLevel\MouseHostWithParser\MouseHostWithParser.h" />
+ </Folder>
+ <Folder name="PrinterHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\PrinterHost\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Host\LowLevel\PrinterHost\Lib\PrinterCommands.c" />
+ <File path="Demos\Host\LowLevel\PrinterHost\Lib\PrinterCommands.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\PrinterHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\PrinterHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\PrinterHost\makefile" />
+ <File path="Demos\Host\LowLevel\PrinterHost\PrinterHost.c" />
+ <File path="Demos\Host\LowLevel\PrinterHost\PrinterHost.h" />
+ <File path="Demos\Host\LowLevel\PrinterHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\PrinterHost\PrinterHost.txt" />
+ </Folder>
+ <Folder name="RNDISEthernetHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\Lib\RNDISCommands.c" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\Lib\RNDISCommands.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\makefile" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\RNDISEthernetHost.c" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\RNDISEthernetHost.h" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\RNDISEthernetHost\RNDISHost.txt" />
+ </Folder>
+ <Folder name="StillImageHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\StillImageHost\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Demos\Host\LowLevel\StillImageHost\Lib\StillImageCommands.c" />
+ <File path="Demos\Host\LowLevel\StillImageHost\Lib\StillImageCommands.h" />
+ <File path="Demos\Host\LowLevel\StillImageHost\Lib\PIMACodes.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\StillImageHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\StillImageHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\StillImageHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\StillImageHost\makefile" />
+ <File path="Demos\Host\LowLevel\StillImageHost\StillImageHost.c" />
+ <File path="Demos\Host\LowLevel\StillImageHost\StillImageHost.h" />
+ <File path="Demos\Host\LowLevel\StillImageHost\StillImageHost.txt" />
+ </Folder>
+ <Folder name="VirtualSerialHost">
+ <Folder name="Config">
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\ConfigDescriptor.c" />
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\ConfigDescriptor.h" />
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\Doxygen.conf" />
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\makefile" />
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\VirtualSerialHost.c" />
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\VirtualSerialHost.h" />
+ <File path="Demos\Host\LowLevel\VirtualSerialHost\VirtualSerialHost.txt" />
+ </Folder>
+ <File path="Demos\Host\LowLevel\makefile" />
+ </Folder>
+ <File path="Demos\Host\makefile" />
+ </Folder>
+ <Folder name="DualRole">
+ <Folder name="ClassDriver">
+ <Folder name="MouseHostDevice">
+ <Folder name="Config">
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\Doxygen.conf" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\makefile" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\MouseHostDevice.c" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\MouseHostDevice.h" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\Descriptors.c" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\Descriptors.h" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\DeviceFunctions.c" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\HostFunctions.c" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\HostFunctions.h" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\DeviceFunctions.h" />
+ <File path="Demos\DualRole\ClassDriver\MouseHostDevice\MouseHostDevice.txt" />
+ </Folder>
+ <File path="Demos\DualRole\ClassDriver\makefile" />
+ </Folder>
+ <File path="Demos\DualRole\makefile" />
+ </Folder>
+ <File path="Demos\makefile" />
+ </Folder>
+ <Folder name="LUFA">
+ <Folder name="CodeTemplates">
+ <Folder name="DriverStubs">
+ <File path="LUFA\CodeTemplates\DriverStubs\Buttons.h" />
+ <File path="LUFA\CodeTemplates\DriverStubs\Dataflash.h" />
+ <File path="LUFA\CodeTemplates\DriverStubs\Joystick.h" />
+ <File path="LUFA\CodeTemplates\DriverStubs\LEDs.h" />
+ </Folder>
+ <File path="LUFA\CodeTemplates\makefile_template.avr8" />
+ <File path="LUFA\CodeTemplates\makefile_template.uc3" />
+ <File path="LUFA\CodeTemplates\makefile_template.xmega" />
+ <File path="LUFA\CodeTemplates\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Common">
+ <File path="LUFA\Common\Common.h" />
+ <File path="LUFA\Common\BoardTypes.h" />
+ <File path="LUFA\Common\Attributes.h" />
+ <File path="LUFA\Common\Architectures.h" />
+ <File path="LUFA\Common\Endianness.h" />
+ <File path="LUFA\Common\CompilerSpecific.h" />
+ <File path="LUFA\Common\ArchitectureSpecific.h" />
+ </Folder>
+ <Folder name="DoxygenPages">
+ <Folder name="Style">
+ <File path="LUFA\DoxygenPages\Style\Footer.htm" />
+ <File path="LUFA\DoxygenPages\Style\Style.css" />
+ </Folder>
+ <Folder name="Images">
+ <Folder name="AS5_AS6_Import">
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step1.png" />
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step2.png" />
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step3.png" />
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step4.png" />
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step5_1.png" />
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step5_2.png" />
+ <File path="LUFA\DoxygenPages\Images\AS5_AS6_Import\AS5_AS6_Import_Step5_3.png" />
+ </Folder>
+ <File path="LUFA\DoxygenPages\Images\Author.jpg" />
+ <File path="LUFA\DoxygenPages\Images\LUFA.png" />
+ <File path="LUFA\DoxygenPages\Images\LUFA_thumb.png" />
+ </Folder>
+ <File path="LUFA\DoxygenPages\BuildingLinkableLibraries.txt" />
+ <File path="LUFA\DoxygenPages\ChangeLog.txt" />
+ <File path="LUFA\DoxygenPages\CompileTimeTokens.txt" />
+ <File path="LUFA\DoxygenPages\CompilingApps.txt" />
+ <File path="LUFA\DoxygenPages\ConfiguringApps.txt" />
+ <File path="LUFA\DoxygenPages\DevelopingWithLUFA.txt" />
+ <File path="LUFA\DoxygenPages\DeviceSupport.txt" />
+ <File path="LUFA\DoxygenPages\DirectorySummaries.txt" />
+ <File path="LUFA\DoxygenPages\Donating.txt" />
+ <File path="LUFA\DoxygenPages\FutureChanges.txt" />
+ <File path="LUFA\DoxygenPages\GettingStarted.txt" />
+ <File path="LUFA\DoxygenPages\Groups.txt" />
+ <File path="LUFA\DoxygenPages\LibraryResources.txt" />
+ <File path="LUFA\DoxygenPages\LicenseInfo.txt" />
+ <File path="LUFA\DoxygenPages\LUFAPoweredProjects.txt" />
+ <File path="LUFA\DoxygenPages\MainPage.txt" />
+ <File path="LUFA\DoxygenPages\MigrationInformation.txt" />
+ <File path="LUFA\DoxygenPages\ProgrammingApps.txt" />
+ <File path="LUFA\DoxygenPages\SoftwareBootloaderJump.txt" />
+ <File path="LUFA\DoxygenPages\VIDAndPIDValues.txt" />
+ <File path="LUFA\DoxygenPages\WritingBoardDrivers.txt" />
+ <File path="LUFA\DoxygenPages\ExportingLibrary.txt" />
+ <File path="LUFA\DoxygenPages\KnownIssues.txt" />
+ </Folder>
+ <Folder name="Drivers">
+ <Folder name="USB">
+ <Folder name="Class">
+ <Folder name="Device">
+ <File path="LUFA\Drivers\USB\Class\Device\AudioClassDevice.c" />
+ <File path="LUFA\Drivers\USB\Class\Device\AudioClassDevice.h" />
+ <File path="LUFA\Drivers\USB\Class\Device\CDCClassDevice.c" />
+ <File path="LUFA\Drivers\USB\Class\Device\CDCClassDevice.h" />
+ <File path="LUFA\Drivers\USB\Class\Device\HIDClassDevice.c" />
+ <File path="LUFA\Drivers\USB\Class\Device\HIDClassDevice.h" />
+ <File path="LUFA\Drivers\USB\Class\Device\MassStorageClassDevice.c" />
+ <File path="LUFA\Drivers\USB\Class\Device\MassStorageClassDevice.h" />
+ <File path="LUFA\Drivers\USB\Class\Device\MIDIClassDevice.c" />
+ <File path="LUFA\Drivers\USB\Class\Device\MIDIClassDevice.h" />
+ <File path="LUFA\Drivers\USB\Class\Device\RNDISClassDevice.c" />
+ <File path="LUFA\Drivers\USB\Class\Device\RNDISClassDevice.h" />
+ </Folder>
+ <Folder name="Host">
+ <File path="LUFA\Drivers\USB\Class\Host\AudioClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\AudioClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\CDCClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\CDCClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\HIDClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\HIDClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\MassStorageClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\MassStorageClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\MIDIClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\MIDIClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\PrinterClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\PrinterClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\RNDISClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\RNDISClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\StillImageClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\StillImageClassHost.h" />
+ <File path="LUFA\Drivers\USB\Class\Host\AndroidAccessoryClassHost.c" />
+ <File path="LUFA\Drivers\USB\Class\Host\AndroidAccessoryClassHost.h" />
+ </Folder>
+ <Folder name="Common">
+ <File path="LUFA\Drivers\USB\Class\Common\AudioClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\CDCClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\HIDClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\HIDParser.c" />
+ <File path="LUFA\Drivers\USB\Class\Common\HIDParser.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\HIDReportData.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\MassStorageClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\MIDIClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\PrinterClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\RNDISClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\StillImageClassCommon.h" />
+ <File path="LUFA\Drivers\USB\Class\Common\AndroidAccessoryClassCommon.h" />
+ </Folder>
+ <File path="LUFA\Drivers\USB\Class\AudioClass.h" />
+ <File path="LUFA\Drivers\USB\Class\CDCClass.h" />
+ <File path="LUFA\Drivers\USB\Class\HIDClass.h" />
+ <File path="LUFA\Drivers\USB\Class\MassStorageClass.h" />
+ <File path="LUFA\Drivers\USB\Class\MIDIClass.h" />
+ <File path="LUFA\Drivers\USB\Class\PrinterClass.h" />
+ <File path="LUFA\Drivers\USB\Class\RNDISClass.h" />
+ <File path="LUFA\Drivers\USB\Class\StillImageClass.h" />
+ <File path="LUFA\Drivers\USB\Class\AndroidAccessoryClass.h" />
+ </Folder>
+ <Folder name="Core">
+ <Folder name="AVR8">
+ <Folder name="Template">
+ <File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Endpoint_Control_R.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Endpoint_Control_W.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Endpoint_RW.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Template\Template_Pipe_RW.c" />
+ </Folder>
+ <File path="LUFA\Drivers\USB\Core\AVR8\Device_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Device_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Endpoint_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Endpoint_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Host_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Host_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\OTG_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Pipe_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\Pipe_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\USBController_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\USBController_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\USBInterrupt_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\USBInterrupt_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\EndpointStream_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\EndpointStream_AVR8.h" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\PipeStream_AVR8.c" />
+ <File path="LUFA\Drivers\USB\Core\AVR8\PipeStream_AVR8.h" />
+ </Folder>
+ <Folder name="UC3">
+ <Folder name="Template">
+ <File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Endpoint_Control_R.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Endpoint_Control_W.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Endpoint_RW.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Template\Template_Pipe_RW.c" />
+ </Folder>
+ <File path="LUFA\Drivers\USB\Core\UC3\Device_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Device_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Endpoint_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Endpoint_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Pipe_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Pipe_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\USBController_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\USBController_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\USBInterrupt_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\USBInterrupt_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Host_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\Host_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\EndpointStream_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\EndpointStream_UC3.h" />
+ <File path="LUFA\Drivers\USB\Core\UC3\PipeStream_UC3.c" />
+ <File path="LUFA\Drivers\USB\Core\UC3\PipeStream_UC3.h" />
+ </Folder>
+ <Folder name="XMEGA">
+ <Folder name="Template">
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Template\Template_Endpoint_Control_R.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Template\Template_Endpoint_Control_W.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Template\Template_Endpoint_RW.c" />
+ </Folder>
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Device_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Device_XMEGA.h" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Endpoint_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Endpoint_XMEGA.h" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\EndpointStream_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\EndpointStream_XMEGA.h" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Host_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\Pipe_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\PipeStream_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\USBController_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\USBController_XMEGA.h" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\USBInterrupt_XMEGA.c" />
+ <File path="LUFA\Drivers\USB\Core\XMEGA\USBInterrupt_XMEGA.h" />
+ </Folder>
+ <File path="LUFA\Drivers\USB\Core\ConfigDescriptor.c" />
+ <File path="LUFA\Drivers\USB\Core\ConfigDescriptor.h" />
+ <File path="LUFA\Drivers\USB\Core\DeviceStandardReq.c" />
+ <File path="LUFA\Drivers\USB\Core\DeviceStandardReq.h" />
+ <File path="LUFA\Drivers\USB\Core\Events.c" />
+ <File path="LUFA\Drivers\USB\Core\Events.h" />
+ <File path="LUFA\Drivers\USB\Core\HostStandardReq.c" />
+ <File path="LUFA\Drivers\USB\Core\HostStandardReq.h" />
+ <File path="LUFA\Drivers\USB\Core\StdDescriptors.h" />
+ <File path="LUFA\Drivers\USB\Core\StdRequestType.h" />
+ <File path="LUFA\Drivers\USB\Core\USBMode.h" />
+ <File path="LUFA\Drivers\USB\Core\USBTask.c" />
+ <File path="LUFA\Drivers\USB\Core\USBTask.h" />
+ <File path="LUFA\Drivers\USB\Core\Device.h" />
+ <File path="LUFA\Drivers\USB\Core\Endpoint.h" />
+ <File path="LUFA\Drivers\USB\Core\Host.h" />
+ <File path="LUFA\Drivers\USB\Core\Pipe.h" />
+ <File path="LUFA\Drivers\USB\Core\USBController.h" />
+ <File path="LUFA\Drivers\USB\Core\USBInterrupt.h" />
+ <File path="LUFA\Drivers\USB\Core\OTG.h" />
+ <File path="LUFA\Drivers\USB\Core\EndpointStream.h" />
+ <File path="LUFA\Drivers\USB\Core\PipeStream.h" />
+ </Folder>
+ <File path="LUFA\Drivers\USB\USB.h" />
+ </Folder>
+ <Folder name="Misc">
+ <File path="LUFA\Drivers\Misc\TerminalCodes.h" />
+ <File path="LUFA\Drivers\Misc\RingBuffer.h" />
+ <File path="LUFA\Drivers\Misc\AT45DB321C.h" />
+ <File path="LUFA\Drivers\Misc\AT45DB642D.h" />
+ </Folder>
+ <Folder name="Board">
+ <Folder name="AVR8">
+ <Folder name="ADAFRUITU4">
+ <File path="LUFA\Drivers\Board\AVR8\ADAFRUITU4\LEDs.h" />
+ </Folder>
+ <Folder name="ATAVRUSBRF01">
+ <File path="LUFA\Drivers\Board\AVR8\ATAVRUSBRF01\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\ATAVRUSBRF01\LEDs.h" />
+ </Folder>
+ <Folder name="BENITO">
+ <File path="LUFA\Drivers\Board\AVR8\BENITO\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\BENITO\LEDs.h" />
+ </Folder>
+ <Folder name="BIGMULTIO">
+ <File path="LUFA\Drivers\Board\AVR8\BIGMULTIO\LEDs.h" />
+ </Folder>
+ <Folder name="BLACKCAT">
+ <File path="LUFA\Drivers\Board\AVR8\BLACKCAT\LEDs.h" />
+ </Folder>
+ <Folder name="BUI">
+ <File path="LUFA\Drivers\Board\AVR8\BUI\LEDs.h" />
+ </Folder>
+ <Folder name="BUMBLEB">
+ <File path="LUFA\Drivers\Board\AVR8\BUMBLEB\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\BUMBLEB\Joystick.h" />
+ <File path="LUFA\Drivers\Board\AVR8\BUMBLEB\LEDs.h" />
+ </Folder>
+ <Folder name="CULV3">
+ <File path="LUFA\Drivers\Board\AVR8\CULV3\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\CULV3\LEDs.h" />
+ </Folder>
+ <Folder name="DUCE">
+ <File path="LUFA\Drivers\Board\AVR8\DUCE\LEDs.h" />
+ </Folder>
+ <Folder name="EVK527">
+ <File path="LUFA\Drivers\Board\AVR8\EVK527\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\EVK527\Dataflash.h" />
+ <File path="LUFA\Drivers\Board\AVR8\EVK527\Joystick.h" />
+ <File path="LUFA\Drivers\Board\AVR8\EVK527\LEDs.h" />
+ </Folder>
+ <Folder name="JMDBU2">
+ <File path="LUFA\Drivers\Board\AVR8\JMDBU2\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\JMDBU2\LEDs.h" />
+ </Folder>
+ <Folder name="MAXIMUS">
+ <File path="LUFA\Drivers\Board\AVR8\MAXIMUS\LEDs.h" />
+ </Folder>
+ <Folder name="MICROPENDOUS">
+ <File path="LUFA\Drivers\Board\AVR8\MICROPENDOUS\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\MICROPENDOUS\LEDs.h" />
+ </Folder>
+ <Folder name="MICROSIN162">
+ <File path="LUFA\Drivers\Board\AVR8\MICROSIN162\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\MICROSIN162\LEDs.h" />
+ </Folder>
+ <Folder name="MINIMUS">
+ <File path="LUFA\Drivers\Board\AVR8\MINIMUS\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\MINIMUS\LEDs.h" />
+ </Folder>
+ <Folder name="MULTIO">
+ <File path="LUFA\Drivers\Board\AVR8\MULTIO\LEDs.h" />
+ </Folder>
+ <Folder name="OLIMEX32U4">
+ <File path="LUFA\Drivers\Board\AVR8\OLIMEX32U4\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\OLIMEX32U4\LEDs.h" />
+ </Folder>
+ <Folder name="OLIMEX162">
+ <File path="LUFA\Drivers\Board\AVR8\OLIMEX162\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\OLIMEX162\LEDs.h" />
+ </Folder>
+ <Folder name="OLIMEXT32U4">
+ <File path="LUFA\Drivers\Board\AVR8\OLIMEXT32U4\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\OLIMEXT32U4\LEDs.h" />
+ </Folder>
+ <Folder name="RZUSBSTICK">
+ <File path="LUFA\Drivers\Board\AVR8\RZUSBSTICK\LEDs.h" />
+ </Folder>
+ <Folder name="SPARKFUN8U2">
+ <File path="LUFA\Drivers\Board\AVR8\SPARKFUN8U2\LEDs.h" />
+ </Folder>
+ <Folder name="STK525">
+ <File path="LUFA\Drivers\Board\AVR8\STK525\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\STK525\Dataflash.h" />
+ <File path="LUFA\Drivers\Board\AVR8\STK525\Joystick.h" />
+ <File path="LUFA\Drivers\Board\AVR8\STK525\LEDs.h" />
+ </Folder>
+ <Folder name="STK526">
+ <File path="LUFA\Drivers\Board\AVR8\STK526\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\STK526\Dataflash.h" />
+ <File path="LUFA\Drivers\Board\AVR8\STK526\Joystick.h" />
+ <File path="LUFA\Drivers\Board\AVR8\STK526\LEDs.h" />
+ </Folder>
+ <Folder name="TEENSY">
+ <File path="LUFA\Drivers\Board\AVR8\TEENSY\LEDs.h" />
+ </Folder>
+ <Folder name="TUL">
+ <File path="LUFA\Drivers\Board\AVR8\TUL\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\TUL\LEDs.h" />
+ </Folder>
+ <Folder name="UDIP">
+ <File path="LUFA\Drivers\Board\AVR8\UDIP\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\UDIP\LEDs.h" />
+ </Folder>
+ <Folder name="UNO">
+ <File path="LUFA\Drivers\Board\AVR8\UNO\LEDs.h" />
+ </Folder>
+ <Folder name="USB2AX">
+ <File path="LUFA\Drivers\Board\AVR8\USB2AX\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\USB2AX\LEDs.h" />
+ </Folder>
+ <Folder name="USBFOO">
+ <File path="LUFA\Drivers\Board\AVR8\USBFOO\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\USBFOO\LEDs.h" />
+ </Folder>
+ <Folder name="USBKEY">
+ <File path="LUFA\Drivers\Board\AVR8\USBKEY\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\USBKEY\Dataflash.h" />
+ <File path="LUFA\Drivers\Board\AVR8\USBKEY\Joystick.h" />
+ <File path="LUFA\Drivers\Board\AVR8\USBKEY\LEDs.h" />
+ </Folder>
+ <Folder name="USBTINYMKII">
+ <File path="LUFA\Drivers\Board\AVR8\USBTINYMKII\Buttons.h" />
+ <File path="LUFA\Drivers\Board\AVR8\USBTINYMKII\LEDs.h" />
+ </Folder>
+ <Folder name="XPLAIN">
+ <File path="LUFA\Drivers\Board\AVR8\XPLAIN\Dataflash.h" />
+ <File path="LUFA\Drivers\Board\AVR8\XPLAIN\LEDs.h" />
+ </Folder>
+ </Folder>
+ <Folder name="UC3">
+ <Folder name="EVK1100">
+ <File path="LUFA\Drivers\Board\UC3\EVK1100\Buttons.h" />
+ <File path="LUFA\Drivers\Board\UC3\EVK1100\Joystick.h" />
+ <File path="LUFA\Drivers\Board\UC3\EVK1100\LEDs.h" />
+ </Folder>
+ <Folder name="EVK1101">
+ <File path="LUFA\Drivers\Board\UC3\EVK1101\Buttons.h" />
+ <File path="LUFA\Drivers\Board\UC3\EVK1101\Joystick.h" />
+ <File path="LUFA\Drivers\Board\UC3\EVK1101\LEDs.h" />
+ </Folder>
+ <Folder name="EVK1104">
+ <File path="LUFA\Drivers\Board\UC3\EVK1104\Buttons.h" />
+ <File path="LUFA\Drivers\Board\UC3\EVK1104\LEDs.h" />
+ </Folder>
+ </Folder>
+ <Folder name="XMEGA">
+ <Folder name="A3BU_XPLAINED">
+ <File path="LUFA\Drivers\Board\XMEGA\A3BU_XPLAINED\Buttons.h" />
+ <File path="LUFA\Drivers\Board\XMEGA\A3BU_XPLAINED\LEDs.h" />
+ <File path="LUFA\Drivers\Board\XMEGA\A3BU_XPLAINED\Dataflash.h" />
+ </Folder>
+ <Folder name="B1_XPLAINED">
+ <File path="LUFA\Drivers\Board\XMEGA\B1_XPLAINED\Buttons.h" />
+ <File path="LUFA\Drivers\Board\XMEGA\B1_XPLAINED\LEDs.h" />
+ <File path="LUFA\Drivers\Board\XMEGA\B1_XPLAINED\Dataflash.h" />
+ </Folder>
+ </Folder>
+ <File path="LUFA\Drivers\Board\Temperature.h" />
+ <File path="LUFA\Drivers\Board\Dataflash.h" />
+ <File path="LUFA\Drivers\Board\Joystick.h" />
+ <File path="LUFA\Drivers\Board\Temperature.c" />
+ <File path="LUFA\Drivers\Board\LEDs.h" />
+ <File path="LUFA\Drivers\Board\Buttons.h" />
+ </Folder>
+ <Folder name="Peripheral">
+ <Folder name="AVR8">
+ <File path="LUFA\Drivers\Peripheral\AVR8\ADC_AVR8.h" />
+ <File path="LUFA\Drivers\Peripheral\AVR8\Serial_AVR8.c" />
+ <File path="LUFA\Drivers\Peripheral\AVR8\Serial_AVR8.h" />
+ <File path="LUFA\Drivers\Peripheral\AVR8\SPI_AVR8.h" />
+ <File path="LUFA\Drivers\Peripheral\AVR8\TWI_AVR8.c" />
+ <File path="LUFA\Drivers\Peripheral\AVR8\TWI_AVR8.h" />
+ <File path="LUFA\Drivers\Peripheral\AVR8\SerialSPI_AVR8.h" />
+ </Folder>
+ <Folder name="UC3" />
+ <Folder name="XMEGA">
+ <File path="LUFA\Drivers\Peripheral\XMEGA\SPI_XMEGA.h" />
+ <File path="LUFA\Drivers\Peripheral\XMEGA\Serial_XMEGA.c" />
+ <File path="LUFA\Drivers\Peripheral\XMEGA\Serial_XMEGA.h" />
+ <File path="LUFA\Drivers\Peripheral\XMEGA\SerialSPI_XMEGA.h" />
+ </Folder>
+ <File path="LUFA\Drivers\Peripheral\ADC.h" />
+ <File path="LUFA\Drivers\Peripheral\TWI.h" />
+ <File path="LUFA\Drivers\Peripheral\Serial.h" />
+ <File path="LUFA\Drivers\Peripheral\SPI.h" />
+ <File path="LUFA\Drivers\Peripheral\SerialSPI.h" />
+ </Folder>
+ </Folder>
+ <Folder name="Platform">
+ <Folder name="AVR8" />
+ <Folder name="UC3">
+ <File path="LUFA\Platform\UC3\InterruptManagement.h" />
+ <File path="LUFA\Platform\UC3\InterruptManagement.c" />
+ <File path="LUFA\Platform\UC3\Exception.S" />
+ <File path="LUFA\Platform\UC3\ClockManagement.h" />
+ </Folder>
+ <Folder name="XMEGA">
+ <File path="LUFA\Platform\XMEGA\ClockManagement.h" />
+ </Folder>
+ </Folder>
+ <File path="LUFA\makefile" />
+ <File path="LUFA\Version.h" />
+ <File path="LUFA\Doxygen.conf" />
+ <File path="LUFA\License.txt" />
+ </Folder>
+ <Folder name="Bootloaders">
+ <Folder name="CDC">
+ <Folder name="Config">
+ <File path="Bootloaders\CDC\Config\LUFAConfig.h" />
+ <File path="Bootloaders\CDC\Config\AppConfig.h" />
+ </Folder>
+ <File path="Bootloaders\CDC\BootloaderCDC.c" />
+ <File path="Bootloaders\CDC\BootloaderCDC.h" />
+ <File path="Bootloaders\CDC\Descriptors.c" />
+ <File path="Bootloaders\CDC\Descriptors.h" />
+ <File path="Bootloaders\CDC\makefile" />
+ <File path="Bootloaders\CDC\LUFA CDC Bootloader.inf" />
+ <File path="Bootloaders\CDC\Doxygen.conf" />
+ <File path="Bootloaders\CDC\BootloaderCDC.txt" />
+ <File path="Bootloaders\CDC\BootloaderAPI.c" />
+ <File path="Bootloaders\CDC\BootloaderAPI.h" />
+ <File path="Bootloaders\CDC\BootloaderAPITable.S" />
+ </Folder>
+ <Folder name="DFU">
+ <Folder name="Config">
+ <File path="Bootloaders\DFU\Config\LUFAConfig.h" />
+ <File path="Bootloaders\DFU\Config\AppConfig.h" />
+ </Folder>
+ <File path="Bootloaders\DFU\BootloaderDFU.c" />
+ <File path="Bootloaders\DFU\BootloaderDFU.h" />
+ <File path="Bootloaders\DFU\Descriptors.c" />
+ <File path="Bootloaders\DFU\Descriptors.h" />
+ <File path="Bootloaders\DFU\makefile" />
+ <File path="Bootloaders\DFU\BootloaderDFU.txt" />
+ <File path="Bootloaders\DFU\Doxygen.conf" />
+ <File path="Bootloaders\DFU\BootloaderAPI.c" />
+ <File path="Bootloaders\DFU\BootloaderAPI.h" />
+ <File path="Bootloaders\DFU\BootloaderAPITable.S" />
+ </Folder>
+ <Folder name="HID">
+ <Folder name="Config">
+ <File path="Bootloaders\HID\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="HostLoaderApp">
+ <File path="Bootloaders\HID\HostLoaderApp\gpl3.txt" />
+ <File path="Bootloaders\HID\HostLoaderApp\Makefile" />
+ <File path="Bootloaders\HID\HostLoaderApp\Makefile.bsd" />
+ <File path="Bootloaders\HID\HostLoaderApp\hid_bootloader_cli.c" />
+ </Folder>
+ <File path="Bootloaders\HID\Descriptors.c" />
+ <File path="Bootloaders\HID\Descriptors.h" />
+ <File path="Bootloaders\HID\makefile" />
+ <File path="Bootloaders\HID\BootloaderHID.txt" />
+ <File path="Bootloaders\HID\BootloaderHID.c" />
+ <File path="Bootloaders\HID\BootloaderHID.h" />
+ <File path="Bootloaders\HID\Doxygen.conf" />
+ </Folder>
+ <File path="Bootloaders\makefile" />
+ </Folder>
+ <Folder name="Projects">
+ <Folder name="AVRISP-MKII">
+ <Folder name="Config">
+ <File path="Projects\AVRISP-MKII\Config\AppConfig.h" />
+ <File path="Projects\AVRISP-MKII\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <Folder name="ISP">
+ <File path="Projects\AVRISP-MKII\Lib\ISP\ISPProtocol.c" />
+ <File path="Projects\AVRISP-MKII\Lib\ISP\ISPProtocol.h" />
+ <File path="Projects\AVRISP-MKII\Lib\ISP\ISPTarget.c" />
+ <File path="Projects\AVRISP-MKII\Lib\ISP\ISPTarget.h" />
+ </Folder>
+ <Folder name="XPROG">
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\TINYNVM.c" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\TINYNVM.h" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\XMEGANVM.c" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\XMEGANVM.h" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGProtocol.c" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGProtocol.h" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGTarget.c" />
+ <File path="Projects\AVRISP-MKII\Lib\XPROG\XPROGTarget.h" />
+ </Folder>
+ <File path="Projects\AVRISP-MKII\Lib\V2Protocol.c" />
+ <File path="Projects\AVRISP-MKII\Lib\V2Protocol.h" />
+ <File path="Projects\AVRISP-MKII\Lib\V2ProtocolConstants.h" />
+ <File path="Projects\AVRISP-MKII\Lib\V2ProtocolParams.c" />
+ <File path="Projects\AVRISP-MKII\Lib\V2ProtocolParams.h" />
+ </Folder>
+ <File path="Projects\AVRISP-MKII\Doxygen.conf" />
+ <File path="Projects\AVRISP-MKII\makefile" />
+ <File path="Projects\AVRISP-MKII\AVRISP-MKII.c" />
+ <File path="Projects\AVRISP-MKII\AVRISP-MKII.h" />
+ <File path="Projects\AVRISP-MKII\AVRISP-MKII.txt" />
+ <File path="Projects\AVRISP-MKII\AVRISPDescriptors.c" />
+ <File path="Projects\AVRISP-MKII\AVRISPDescriptors.h" />
+ </Folder>
+ <Folder name="Benito">
+ <Folder name="Config">
+ <File path="Projects\Benito\Config\LUFAConfig.h" />
+ <File path="Projects\Benito\Config\AppConfig.h" />
+ </Folder>
+ <File path="Projects\Benito\Benito.c" />
+ <File path="Projects\Benito\Benito.h" />
+ <File path="Projects\Benito\Descriptors.c" />
+ <File path="Projects\Benito\Descriptors.h" />
+ <File path="Projects\Benito\Doxygen.conf" />
+ <File path="Projects\Benito\makefile" />
+ <File path="Projects\Benito\Benito.txt" />
+ <File path="Projects\Benito\Benito Programmer.inf" />
+ </Folder>
+ <Folder name="HIDReportViewer">
+ <Folder name="Config">
+ <File path="Projects\HIDReportViewer\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Projects\HIDReportViewer\HIDReportViewer.c" />
+ <File path="Projects\HIDReportViewer\HIDReportViewer.h" />
+ <File path="Projects\HIDReportViewer\makefile" />
+ <File path="Projects\HIDReportViewer\HIDReportViewer.txt" />
+ <File path="Projects\HIDReportViewer\Doxygen.conf" />
+ </Folder>
+ <Folder name="LEDNotifier">
+ <Folder name="Config">
+ <File path="Projects\LEDNotifier\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="CPUUsageApp">
+ <File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.cs" />
+ <File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.csproj" />
+ <File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.Designer.cs" />
+ <File path="Projects\LEDNotifier\CPUUsageApp\CPUMonitor.resx" />
+ <File path="Projects\LEDNotifier\CPUUsageApp\Program.cs" />
+ </Folder>
+ <Folder name="HotmailNotifierApp">
+ <File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.cs" />
+ <File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.csproj" />
+ <File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.Designer.cs" />
+ <File path="Projects\LEDNotifier\HotmailNotifierApp\MailNotifier.resx" />
+ <File path="Projects\LEDNotifier\HotmailNotifierApp\Program.cs" />
+ </Folder>
+ <Folder name="LEDMixerApp">
+ <File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.cs" />
+ <File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.csproj" />
+ <File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.Designer.cs" />
+ <File path="Projects\LEDNotifier\LEDMixerApp\LEDMixer.resx" />
+ <File path="Projects\LEDNotifier\LEDMixerApp\Program.cs" />
+ </Folder>
+ <File path="Projects\LEDNotifier\Descriptors.c" />
+ <File path="Projects\LEDNotifier\Descriptors.h" />
+ <File path="Projects\LEDNotifier\Doxygen.conf" />
+ <File path="Projects\LEDNotifier\LEDNotifier.c" />
+ <File path="Projects\LEDNotifier\LEDNotifier.h" />
+ <File path="Projects\LEDNotifier\LEDNotifier.txt" />
+ <File path="Projects\LEDNotifier\LUFA LED Notifier.inf" />
+ <File path="Projects\LEDNotifier\makefile" />
+ </Folder>
+ <Folder name="MagStripe">
+ <Folder name="Config">
+ <File path="Projects\Magstripe\Config\AppConfig.h" />
+ <File path="Projects\Magstripe\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Projects\Magstripe\Lib\CircularBitBuffer.c" />
+ <File path="Projects\Magstripe\Lib\CircularBitBuffer.h" />
+ <File path="Projects\Magstripe\Lib\MagstripeHW.h" />
+ </Folder>
+ <File path="Projects\Magstripe\Descriptors.c" />
+ <File path="Projects\Magstripe\Descriptors.h" />
+ <File path="Projects\Magstripe\Magstripe.c" />
+ <File path="Projects\Magstripe\Magstripe.h" />
+ <File path="Projects\Magstripe\makefile" />
+ <File path="Projects\Magstripe\Magstripe.txt" />
+ <File path="Projects\Magstripe\Doxygen.conf" />
+ </Folder>
+ <Folder name="MediaController">
+ <Folder name="Config">
+ <File path="Projects\MediaController\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Projects\MediaController\Descriptors.c" />
+ <File path="Projects\MediaController\Descriptors.h" />
+ <File path="Projects\MediaController\Doxygen.conf" />
+ <File path="Projects\MediaController\makefile" />
+ <File path="Projects\MediaController\MediaController.c" />
+ <File path="Projects\MediaController\MediaController.h" />
+ <File path="Projects\MediaController\MediaController.txt" />
+ </Folder>
+ <Folder name="MIDIToneGenerator">
+ <Folder name="Config">
+ <File path="Projects\MIDIToneGenerator\Config\LUFAConfig.h" />
+ <File path="Projects\MIDIToneGenerator\Config\AppConfig.h" />
+ </Folder>
+ <File path="Projects\MIDIToneGenerator\Descriptors.c" />
+ <File path="Projects\MIDIToneGenerator\Descriptors.h" />
+ <File path="Projects\MIDIToneGenerator\makefile" />
+ <File path="Projects\MIDIToneGenerator\MIDIToneGenerator.c" />
+ <File path="Projects\MIDIToneGenerator\MIDIToneGenerator.h" />
+ <File path="Projects\MIDIToneGenerator\MIDIToneGenerator.txt" />
+ <File path="Projects\MIDIToneGenerator\Doxygen.conf" />
+ </Folder>
+ <Folder name="MissileLauncher">
+ <Folder name="Config">
+ <File path="Projects\MissileLauncher\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Projects\MissileLauncher\ConfigDescriptor.c" />
+ <File path="Projects\MissileLauncher\ConfigDescriptor.h" />
+ <File path="Projects\MissileLauncher\Doxygen.conf" />
+ <File path="Projects\MissileLauncher\makefile" />
+ <File path="Projects\MissileLauncher\MissileLauncher.c" />
+ <File path="Projects\MissileLauncher\MissileLauncher.h" />
+ <File path="Projects\MissileLauncher\MissileLauncher.txt" />
+ </Folder>
+ <Folder name="RelayBoard">
+ <Folder name="Config">
+ <File path="Projects\RelayBoard\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Projects\RelayBoard\Descriptors.c" />
+ <File path="Projects\RelayBoard\Descriptors.h" />
+ <File path="Projects\RelayBoard\Doxygen.conf" />
+ <File path="Projects\RelayBoard\makefile" />
+ <File path="Projects\RelayBoard\RelayBoard.c" />
+ <File path="Projects\RelayBoard\RelayBoard.h" />
+ <File path="Projects\RelayBoard\RelayBoard.txt" />
+ </Folder>
+ <Folder name="SerialToLCD">
+ <Folder name="Config">
+ <File path="Projects\SerialToLCD\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Projects\SerialToLCD\Lib\HD44780.c" />
+ <File path="Projects\SerialToLCD\Lib\HD44780.h" />
+ </Folder>
+ <File path="Projects\SerialToLCD\Descriptors.c" />
+ <File path="Projects\SerialToLCD\Descriptors.h" />
+ <File path="Projects\SerialToLCD\makefile" />
+ <File path="Projects\SerialToLCD\SerialToLCD.c" />
+ <File path="Projects\SerialToLCD\SerialToLCD.h" />
+ <File path="Projects\SerialToLCD\SerialToLCD.txt" />
+ <File path="Projects\SerialToLCD\Doxygen.conf" />
+ </Folder>
+ <Folder name="TempDataLogger">
+ <Folder name="Config">
+ <File path="Projects\TempDataLogger\Config\LUFAConfig.h" />
+ <File path="Projects\TempDataLogger\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <Folder name="FATFs">
+ <File path="Projects\TempDataLogger\Lib\FATFs\diskio.c" />
+ <File path="Projects\TempDataLogger\Lib\FATFs\diskio.h" />
+ <File path="Projects\TempDataLogger\Lib\FATFs\ff.c" />
+ <File path="Projects\TempDataLogger\Lib\FATFs\ff.h" />
+ <File path="Projects\TempDataLogger\Lib\FATFs\ffconf.h" />
+ <File path="Projects\TempDataLogger\Lib\FATFs\integer.h" />
+ </Folder>
+ <File path="Projects\TempDataLogger\Lib\DataflashManager.c" />
+ <File path="Projects\TempDataLogger\Lib\DataflashManager.h" />
+ <File path="Projects\TempDataLogger\Lib\DS1307.c" />
+ <File path="Projects\TempDataLogger\Lib\DS1307.h" />
+ <File path="Projects\TempDataLogger\Lib\SCSI.c" />
+ <File path="Projects\TempDataLogger\Lib\SCSI.h" />
+ </Folder>
+ <Folder name="TempLogHostApp">
+ <File path="Projects\TempDataLogger\TempLogHostApp\DataLoggerSettings.cs" />
+ <File path="Projects\TempDataLogger\TempLogHostApp\DataLoggerSettings.Designer.cs" />
+ <File path="Projects\TempDataLogger\TempLogHostApp\DataLoggerSettings.resx" />
+ <File path="Projects\TempDataLogger\TempLogHostApp\Program.cs" />
+ <File path="Projects\TempDataLogger\TempLogHostApp\TempLoggerHostApp.csproj" />
+ </Folder>
+ <File path="Projects\TempDataLogger\Descriptors.c" />
+ <File path="Projects\TempDataLogger\Descriptors.h" />
+ <File path="Projects\TempDataLogger\Doxygen.conf" />
+ <File path="Projects\TempDataLogger\makefile" />
+ <File path="Projects\TempDataLogger\TempDataLogger.c" />
+ <File path="Projects\TempDataLogger\TempDataLogger.h" />
+ <File path="Projects\TempDataLogger\TemperatureDataLogger.txt" />
+ </Folder>
+ <Folder name="USBtoSerial">
+ <Folder name="Config">
+ <File path="Projects\USBtoSerial\Config\LUFAConfig.h" />
+ </Folder>
+ <File path="Projects\USBtoSerial\Descriptors.h" />
+ <File path="Projects\USBtoSerial\Doxygen.conf" />
+ <File path="Projects\USBtoSerial\LUFA USBtoSerial.inf" />
+ <File path="Projects\USBtoSerial\makefile" />
+ <File path="Projects\USBtoSerial\USBtoSerial.c" />
+ <File path="Projects\USBtoSerial\USBtoSerial.h" />
+ <File path="Projects\USBtoSerial\USBtoSerial.txt" />
+ <File path="Projects\USBtoSerial\Descriptors.c" />
+ </Folder>
+ <Folder name="Webserver">
+ <Folder name="Config">
+ <File path="Projects\Webserver\Config\LUFAConfig.h" />
+ <File path="Projects\Webserver\Config\AppConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <Folder name="uip">
+ <File path="Projects\Webserver\Lib\uip\clock.c" />
+ <File path="Projects\Webserver\Lib\uip\clock.h" />
+ <File path="Projects\Webserver\Lib\uip\timer.c" />
+ <File path="Projects\Webserver\Lib\uip\timer.h" />
+ <File path="Projects\Webserver\Lib\uip\uip.c" />
+ <File path="Projects\Webserver\Lib\uip\uip.h" />
+ <File path="Projects\Webserver\Lib\uip\uip_arp.c" />
+ <File path="Projects\Webserver\Lib\uip\uip_arp.h" />
+ <File path="Projects\Webserver\Lib\uip\uipopt.h" />
+ <File path="Projects\Webserver\Lib\uip\uip-split.c" />
+ <File path="Projects\Webserver\Lib\uip\uip-split.h" />
+ </Folder>
+ <Folder name="FATFs">
+ <File path="Projects\Webserver\Lib\FATFs\diskio.c" />
+ <File path="Projects\Webserver\Lib\FATFs\diskio.h" />
+ <File path="Projects\Webserver\Lib\FATFs\ff.c" />
+ <File path="Projects\Webserver\Lib\FATFs\ff.h" />
+ <File path="Projects\Webserver\Lib\FATFs\ffconf.h" />
+ <File path="Projects\Webserver\Lib\FATFs\integer.h" />
+ </Folder>
+ <File path="Projects\Webserver\Lib\DataflashManager.c" />
+ <File path="Projects\Webserver\Lib\DataflashManager.h" />
+ <File path="Projects\Webserver\Lib\uIPManagement.c" />
+ <File path="Projects\Webserver\Lib\uIPManagement.h" />
+ <File path="Projects\Webserver\Lib\HTTPServerApp.c" />
+ <File path="Projects\Webserver\Lib\HTTPServerApp.h" />
+ <File path="Projects\Webserver\Lib\SCSI.c" />
+ <File path="Projects\Webserver\Lib\SCSI.h" />
+ <File path="Projects\Webserver\Lib\TELNETServerApp.c" />
+ <File path="Projects\Webserver\Lib\TELNETServerApp.h" />
+ <File path="Projects\Webserver\Lib\DHCPClientApp.c" />
+ <File path="Projects\Webserver\Lib\DHCPClientApp.h" />
+ <File path="Projects\Webserver\Lib\DHCPCommon.h" />
+ <File path="Projects\Webserver\Lib\DHCPServerApp.c" />
+ <File path="Projects\Webserver\Lib\DHCPServerApp.h" />
+ <File path="Projects\Webserver\Lib\DHCPCommon.c" />
+ </Folder>
+ <File path="Projects\Webserver\makefile" />
+ <File path="Projects\Webserver\Webserver.c" />
+ <File path="Projects\Webserver\Webserver.h" />
+ <File path="Projects\Webserver\Doxygen.conf" />
+ <File path="Projects\Webserver\Webserver.txt" />
+ <File path="Projects\Webserver\Descriptors.c" />
+ <File path="Projects\Webserver\Descriptors.h" />
+ <File path="Projects\Webserver\USBHostMode.c" />
+ <File path="Projects\Webserver\USBHostMode.h" />
+ <File path="Projects\Webserver\USBDeviceMode.c" />
+ <File path="Projects\Webserver\USBDeviceMode.h" />
+ <File path="Projects\Webserver\LUFA Webserver RNDIS.inf" />
+ </Folder>
+ <Folder name="XPLAINBridge">
+ <Folder name="Config">
+ <File path="Projects\XPLAINBridge\Config\AppConfig.h" />
+ <File path="Projects\XPLAINBridge\Config\LUFAConfig.h" />
+ </Folder>
+ <Folder name="Lib">
+ <File path="Projects\XPLAINBridge\Lib\SoftUART.c" />
+ <File path="Projects\XPLAINBridge\Lib\SoftUART.h" />
+ </Folder>
+ <File path="Projects\XPLAINBridge\XPLAINBridge.txt" />
+ <File path="Projects\XPLAINBridge\XPLAINBridge.h" />
+ <File path="Projects\XPLAINBridge\XPLAINBridge.c" />
+ <File path="Projects\XPLAINBridge\USARTDescriptors.h" />
+ <File path="Projects\XPLAINBridge\USARTDescriptors.c" />
+ <File path="Projects\XPLAINBridge\makefile" />
+ <File path="Projects\XPLAINBridge\LUFA XPLAIN Bridge.inf" />
+ <File path="Projects\XPLAINBridge\Doxygen.conf" />
+ </Folder>
+ <File path="Projects\makefile" />
+ </Folder>
+ <Folder name="BuildTests">
+ <Folder name="BoardDriverTest">
+ <Folder name="Board">
+ <File path="BuildTests\BoardDriverTest\Board\Buttons.h" />
+ <File path="BuildTests\BoardDriverTest\Board\Dataflash.h" />
+ <File path="BuildTests\BoardDriverTest\Board\Joystick.h" />
+ <File path="BuildTests\BoardDriverTest\Board\LEDs.h" />
+ </Folder>
+ <File path="BuildTests\BoardDriverTest\BoardDeviceMap.cfg" />
+ <File path="BuildTests\BoardDriverTest\makefile" />
+ <File path="BuildTests\BoardDriverTest\makefile.avr8" />
+ <File path="BuildTests\BoardDriverTest\makefile.uc3" />
+ <File path="BuildTests\BoardDriverTest\makefile.xmega" />
+ <File path="BuildTests\BoardDriverTest\Test.c" />
+ </Folder>
+ <Folder name="BootloaderTest">
+ <File path="BuildTests\BootloaderTest\BootloaderDeviceMap.cfg" />
+ <File path="BuildTests\BootloaderTest\makefile" />
+ </Folder>
+ <Folder name="ModuleTest">
+ <File path="BuildTests\ModuleTest\makefile" />
+ <File path="BuildTests\ModuleTest\makefile.avr8" />
+ <File path="BuildTests\ModuleTest\makefile.uc3" />
+ <File path="BuildTests\ModuleTest\makefile.xmega" />
+ <File path="BuildTests\ModuleTest\Modules.h" />
+ <File path="BuildTests\ModuleTest\Test_C.c" />
+ <File path="BuildTests\ModuleTest\Test_CPP.cpp" />
+ <File path="BuildTests\ModuleTest\Dummy.S" />
+ </Folder>
+ <Folder name="SingleUSBModeTest">
+ <File path="BuildTests\SingleUSBModeTest\makefile" />
+ <File path="BuildTests\SingleUSBModeTest\makefile.avr8" />
+ <File path="BuildTests\SingleUSBModeTest\makefile.uc3" />
+ <File path="BuildTests\SingleUSBModeTest\makefile.xmega" />
+ <File path="BuildTests\SingleUSBModeTest\Test.c" />
+ <File path="BuildTests\SingleUSBModeTest\Dummy.S" />
+ </Folder>
+ <Folder name="StaticAnalysisTest">
+ <File path="BuildTests\StaticAnalysisTest\makefile" />
+ </Folder>
+ <File path="BuildTests\makefile" />
+ </Folder>
+ <Folder name="Maintenance">
+ <File path="Maintenance\makefile" />
+ <File path="Maintenance\AS4Template.aps" />
+ </Folder>
+ <File path="makefile" />
+ <File path="README.txt" />
+</Project>
\ No newline at end of file
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
#endif
#endif
#include <avr/interrupt.h>
#include <avr/power.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
#include "AVRISPDescriptors.h"
#include "Lib/V2Protocol.h"
+ #include "Config/AppConfig.h"
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
* </tr>
* <tr>
* <td>AUX_LINE_PORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>AUX_LINE_PIN</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>AUX_LINE_DDR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>AUX_LINE_MASK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
* but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>VTARGET_ADC_CHANNEL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
* \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>ENABLE_ISP_PROTOCOL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to enable SPI programming protocol support.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>ENABLE_XPROG_PROTOCOL</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to enable PDI and TPI programming protocol support.
* \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>NO_VTARGET_DETECT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
* to report a fixed 3.3V target voltage to the host regardless of the real target voltage.
* \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
* </tr>
* <tr>
* <td>VTARGET_REF_VOLTS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply
* voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage
* to the ADC.
* </tr>
* <tr>
* <td>VTARGET_USE_INTERNAL_REF</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will
* override the VTARGET_REF_VOLTS configuration option.
* \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
* </tr>
* <tr>
* <td>VTARGET_SCALE_FACTOR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the
* ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be
* measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set
* </tr>
* <tr>
* <td>LIBUSB_DRIVER_COMPAT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
* the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
*
* </tr>
* <tr>
* <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
* reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
* power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
* </tr>
* <tr>
* <td>XCK_RESCUE_CLOCK_ENABLE</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming
* hardware that does not expose the OCR1A pin of the AVR, but <i>may</i> cause some issues with PDI programming mode.</td>
* </tr>
* <tr>
* <td>INVERTED_ISP_MISO</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used,
* if the translator hardware inverts the received logic level.</td>
* </tr>
* <tr>
* <td>FIRMWARE_VERSION_MINOR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
* with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
* </tr>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define AUX_LINE_PORT PORTB
+ #define AUX_LINE_PIN PINB
+ #define AUX_LINE_DDR DDRB
+ #define AUX_LINE_MASK (1 << 4)
+
+ #define ENABLE_ISP_PROTOCOL
+ #define ENABLE_XPROG_PROTOCOL
+
+ #define VTARGET_ADC_CHANNEL 2
+ #define VTARGET_REF_VOLTS 5
+ #define VTARGET_SCALE_FACTOR 1
+// #define VTARGET_USE_INTERNAL_REF
+// #define NO_VTARGET_DETECT
+// #define XCK_RESCUE_CLOCK_ENABLE
+// #define INVERTED_ISP_MISO
+
+// #define LIBUSB_DRIVER_COMPAT
+// #define RESET_TOGGLES_LIBUSB_COMPAT
+// #define FIRMWARE_VERSION_MINOR 0x11
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+ #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+ #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 16
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+ #define NO_DEVICE_REMOTE_WAKEUP
+ #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <LUFA/Drivers/USB/USB.h>
#include "../V2Protocol.h"
-
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SPI.h>
- #include "../V2ProtocolParams.h"
-
+ #include "../V2Protocol.h"
+ #include "ISPProtocol.h"
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#include "V2ProtocolParams.h"
#include "ISP/ISPProtocol.h"
#include "XPROG/XPROGProtocol.h"
-
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#include <avr/io.h>
#include <avr/eeprom.h>
- #include <LUFA/Version.h>
-
#if defined(ADC)
#include <LUFA/Drivers/Peripheral/ADC.h>
#endif
#include "V2Protocol.h"
#include "V2ProtocolConstants.h"
#include "ISP/ISPTarget.h"
-
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Parameter privilege mask to allow the host PC to read the parameter's value. */
#define PARAM_PRIV_READ (1 << 0)
#include "XPROGProtocol.h"
#include "XPROGTarget.h"
-
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#include "XPROGProtocol.h"
#include "XPROGTarget.h"
-
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#include "../V2Protocol.h"
#include "XMEGANVM.h"
#include "TINYNVM.h"
-
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
/* On the XPLAIN board, we only need PDI programming
#include "../V2Protocol.h"
#include "XPROGProtocol.h"
-
+ #include "Config/AppConfig.h"
+
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-
-LUFA_OPTS += -D AUX_LINE_PORT=PORTB
-LUFA_OPTS += -D AUX_LINE_PIN=PINB
-LUFA_OPTS += -D AUX_LINE_DDR=DDRB
-LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D ENABLE_ISP_PROTOCOL
-LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL
-LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
-LUFA_OPTS += -D VTARGET_REF_VOLTS=5
-LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1
-#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF
-#LUFA_OPTS += -D NO_VTARGET_DETECT
-#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
-#LUFA_OPTS += -D RESET_TOGGLES_LIBUSB_COMPAT
-#LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE
-#LUFA_OPTS += -D INVERTED_ISP_MISO
-#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
#include <avr/interrupt.h>
#include "Descriptors.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Misc/RingBuffer.h>
* </tr>
* <tr>
* <td>AVR_RESET_LINE_PORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td>
* </tr>
* <tr>
* <td>AVR_RESET_LINE_DDR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td>
* </tr>
* <tr>
* <td>AVR_RESET_LINE_MASK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td>
* </tr>
* <tr>
* <td>AVR_RESET_PULSE_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Pulse length in milliseconds for the target /RESET pulse.</td>
* </tr>
* <tr>
* <td>TX_RX_LED_PULSE_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
* </tr>
* <tr>
* <td>PING_PONG_LED_PULSE_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td>
* </tr>
* <tr>
* <td>RECEIVE_BUFFER_FLUSH_MS</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Period between flushings of received data buffer to the attached USB host.</td>
* </tr>
* </table>
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define AVR_RESET_LINE_PORT PORTD
+ #define AVR_RESET_LINE_DDR DDRD
+ #define AVR_RESET_LINE_MASK (1 << 4)
+
+ #define AVR_RESET_PULSE_MS 10
+
+ #define TX_RX_LED_PULSE_MS 30
+ #define PING_PONG_LED_PULSE_MS 100
+
+ #define RECEIVE_BUFFER_FLUSH_MS 10
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-LUFA_OPTS += -D AVR_RESET_LINE_PORT="PORTD"
-LUFA_OPTS += -D AVR_RESET_LINE_DDR="DDRD"
-LUFA_OPTS += -D AVR_RESET_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D AVR_RESET_PULSE_MS=10
-LUFA_OPTS += -D TX_RX_LED_PULSE_MS=30
-LUFA_OPTS += -D PING_PONG_LED_PULSE_MS=100
-LUFA_OPTS += -D RECEIVE_BUFFER_FLUSH_MS=10
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <stdio.h>
#include <inttypes.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Board/LEDs.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- * computer-readable structures which the host requests upon device enumeration, to determine
- * the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- * device characteristics, including the supported USB version, control endpoint size and the
- * number of device configurations. The descriptor is read out by the USB host when the enumeration
- * process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
- .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
- .USBSpecification = VERSION_BCD(01.10),
- .Class = USB_CSCP_NoDeviceClass,
- .SubClass = USB_CSCP_NoDeviceSubclass,
- .Protocol = USB_CSCP_NoDeviceProtocol,
-
- .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
-
- .VendorID = 0x03EB,
- .ProductID = 0x2063,
- .ReleaseNumber = VERSION_BCD(00.01),
-
- .ManufacturerStrIndex = 0x01,
- .ProductStrIndex = 0x02,
- .SerialNumStrIndex = USE_INTERNAL_SERIAL,
-
- .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- * of the device in one of its supported configurations, including information about any device interfaces
- * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- * a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
- .Config =
- {
- .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
- .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
- .TotalInterfaces = 1,
-
- .ConfigurationNumber = 1,
- .ConfigurationStrIndex = NO_DESCRIPTOR,
-
- .ConfigAttributes = USB_CONFIG_ATTR_RESERVED,
-
- .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
- },
-
- .MS_Interface =
- {
- .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
- .InterfaceNumber = 0,
- .AlternateSetting = 0,
-
- .TotalEndpoints = 2,
-
- .Class = MS_CSCP_MassStorageClass,
- .SubClass = MS_CSCP_SCSITransparentSubclass,
- .Protocol = MS_CSCP_BulkOnlyTransportProtocol,
-
- .InterfaceStrIndex = NO_DESCRIPTOR
- },
-
- .MS_DataInEndpoint =
- {
- .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
- .EndpointAddress = MASS_STORAGE_IN_EPADDR,
- .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
- .EndpointSize = MASS_STORAGE_IO_EPSIZE,
- .PollingIntervalMS = 0x05
- },
-
- .MS_DataOutEndpoint =
- {
- .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
- .EndpointAddress = MASS_STORAGE_OUT_EPADDR,
- .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
- .EndpointSize = MASS_STORAGE_IO_EPSIZE,
- .PollingIntervalMS = 0x05
- }
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- * via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString =
-{
- .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
-
- .UnicodeString = {LANGUAGE_ID_ENG}
-};
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- * Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString =
-{
- .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
-
- .UnicodeString = L"Dean Camera"
-};
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- * Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString =
-{
- .Header = {.Size = USB_STRING_LEN(26), .Type = DTYPE_String},
-
- .UnicodeString = L"LUFA Standalone Programmer"
-};
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- * documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- * USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
- const uint8_t wIndex,
- const void** const DescriptorAddress)
-{
- const uint8_t DescriptorType = (wValue >> 8);
- const uint8_t DescriptorNumber = (wValue & 0xFF);
-
- const void* Address = NULL;
- uint16_t Size = NO_DESCRIPTOR;
-
- switch (DescriptorType)
- {
- case DTYPE_Device:
- Address = &DeviceDescriptor;
- Size = sizeof(USB_Descriptor_Device_t);
- break;
- case DTYPE_Configuration:
- Address = &ConfigurationDescriptor;
- Size = sizeof(USB_Descriptor_Configuration_t);
- break;
- case DTYPE_String:
- switch (DescriptorNumber)
- {
- case 0x00:
- Address = &LanguageString;
- Size = pgm_read_byte(&LanguageString.Header.Size);
- break;
- case 0x01:
- Address = &ManufacturerString;
- Size = pgm_read_byte(&ManufacturerString.Header.Size);
- break;
- case 0x02:
- Address = &ProductString;
- Size = pgm_read_byte(&ProductString.Header.Size);
- break;
- }
-
- break;
- }
-
- *DescriptorAddress = Address;
- return Size;
-}
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
- /* Includes: */
- #include <avr/pgmspace.h>
-
- #include <LUFA/Drivers/USB/USB.h>
-
- /* Macros: */
- /** Endpoint address of the CDC device-to-host notification IN endpoint. */
- #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5)
-
- /** Endpoint address of the CDC device-to-host data IN endpoint. */
- #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1)
-
- /** Endpoint address of the CDC host-to-device data OUT endpoint. */
- #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2)
-
- /** Size in bytes of the CDC device-to-host notification IN endpoint. */
- #define CDC_NOTIFICATION_EPSIZE 8
-
- /** Size in bytes of the CDC data IN and OUT endpoints. */
- #define CDC_TXRX_EPSIZE 16
-
- /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
- #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3)
-
- /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
- #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4)
-
- /** Size in bytes of the Mass Storage data endpoints. */
- #define MASS_STORAGE_IO_EPSIZE 64
-
- /* Type Defines: */
- /** Type define for the device configuration descriptor structure. This must be defined in the
- * application code, as the configuration descriptor contains several sub-descriptors which
- * vary between devices, and which describe the device's usage to the host.
- */
- typedef struct
- {
- USB_Descriptor_Configuration_Header_t Config;
-
- // Mass Storage Interface
- USB_Descriptor_Interface_t MS_Interface;
- USB_Descriptor_Endpoint_t MS_DataInEndpoint;
- USB_Descriptor_Endpoint_t MS_DataOutEndpoint;
- } USB_Descriptor_Configuration_t;
-
- /* Function Prototypes: */
- uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
- const uint8_t wIndex,
- const void** const DescriptorAddress)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "DiskDevice.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- * passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- * within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Device_t DiskDevice_MS_Interface =
- {
- .Config =
- {
- .InterfaceNumber = 0,
- .DataINEndpoint =
- {
- .Address = MASS_STORAGE_IN_EPADDR,
- .Size = MASS_STORAGE_IO_EPSIZE,
- .Banks = 1,
- },
- .DataOUTEndpoint =
- {
- .Address = MASS_STORAGE_OUT_EPADDR,
- .Size = MASS_STORAGE_IO_EPSIZE,
- .Banks = 1,
- },
- .TotalLUNs = 1,
- },
- };
-
-
-void DiskDevice_USBTask(void)
-{
- MS_Device_USBTask(&DiskDevice_MS_Interface);
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
- bool ConfigSuccess = true;
-
- ConfigSuccess &= MS_Device_ConfigureEndpoints(&DiskDevice_MS_Interface);
-
- LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
- MS_Device_ProcessControlRequest(&DiskDevice_MS_Interface);
-}
-
-/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced
- */
-bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- bool CommandSuccess;
-
- LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
- CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
- return CommandSuccess;
-}
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for DiskDevice.c.
- */
-
-#ifndef _DISK_DEVICE_H_
-#define _DISK_DEVICE_H_
-
- /* Includes: */
- #include <avr/io.h>
-
- #include "Descriptors.h"
- #include "StandaloneProgrammer.h"
-
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Board/LEDs.h>
-
- /* Function Prototypes: */
- #if defined(USB_CAN_BE_DEVICE)
- void DiskDevice_USBTask(void);
-
- void EVENT_USB_Device_Connect(void);
- void EVENT_USB_Device_Disconnect(void);
- void EVENT_USB_Device_ConfigurationChanged(void);
- void EVENT_USB_Device_ControlRequest(void);
-
- bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "DiskHost.h"
-
-#if defined(USB_CAN_BE_HOST)
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- * passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- * within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Host_t DiskHost_MS_Interface =
- {
- .Config =
- {
- .DataINPipe =
- {
- .Address = (PIPE_DIR_IN | 1),
- .Banks = 1,
- },
- .DataOUTPipe =
- {
- .Address = (PIPE_DIR_OUT | 2),
- .Banks = 1,
- },
- },
- };
-
-
-void DiskHost_USBTask(void)
-{
- MS_Host_USBTask(&DiskHost_MS_Interface);
-}
-
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
- uint16_t ConfigDescriptorSize;
- uint8_t ConfigDescriptorData[512];
-
- if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- if (MS_Host_ConfigurePipes(&DiskHost_MS_Interface,
- ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- uint8_t MaxLUNIndex;
- if (MS_Host_GetMaxLUN(&DiskHost_MS_Interface, &MaxLUNIndex))
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- if (MS_Host_ResetMSInterface(&DiskHost_MS_Interface))
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- SCSI_Request_Sense_Response_t SenseData;
- if (MS_Host_RequestSense(&DiskHost_MS_Interface, 0, &SenseData) != 0)
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- return;
- }
-
- pf_mount(&DiskFATState);
-
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-void EVENT_USB_Host_DeviceAttached(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-void EVENT_USB_Host_DeviceUnattached(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for DiskHost.c.
- */
-
-#ifndef _DISK_HOST_H_
-#define _DISK_HOST_H_
-
- /* Includes: */
- #include <avr/io.h>
-
- #include "Descriptors.h"
- #include "StandaloneProgrammer.h"
-
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Board/LEDs.h>
-
- /* External Variables: */
- #if defined(USB_CAN_BE_HOST)
- extern USB_ClassInfo_MS_Host_t DiskHost_MS_Interface;
- #endif
-
- /* Function Prototypes: */
- #if defined(USB_CAN_BE_HOST)
- void DiskHost_USBTask(void);
-
- void EVENT_USB_Host_DeviceAttached(void);
- void EVENT_USB_Host_DeviceUnattached(void);
- #endif
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Functions to manage the physical Dataflash media, including reading and writing of
- * blocks of data. These functions are called by the SCSI layer when data must be stored
- * or retrieved to/from the physical storage media. If a different media is used (such
- * as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- * the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- * them to the Dataflash in Dataflash page sized blocks.
- *
- * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state
- * \param[in] BlockAddress Data block starting address for the write sequence
- * \param[in] TotalBlocks Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
- const uint32_t BlockAddress,
- uint16_t TotalBlocks)
-{
- uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
- uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
- uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
- bool UsingSecondBuffer = false;
-
- /* Select the correct starting Dataflash IC for the block requested */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
- /* Copy selected dataflash's current page contents to the Dataflash buffer */
- Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
- Dataflash_WaitWhileBusy();
-#endif
-
- /* Send the Dataflash buffer write command */
- Dataflash_SendByte(DF_CMD_BUFF1WRITE);
- Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
- /* Wait until endpoint is ready before continuing */
- if (Endpoint_WaitUntilReady())
- return;
-
- while (TotalBlocks)
- {
- uint8_t BytesInBlockDiv16 = 0;
-
- /* Write an endpoint packet sized data block to the Dataflash */
- while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
- {
- /* Check if the endpoint is currently empty */
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- /* Clear the current endpoint bank */
- Endpoint_ClearOUT();
-
- /* Wait until the host has sent another packet */
- if (Endpoint_WaitUntilReady())
- return;
- }
-
- /* Check if end of Dataflash page reached */
- if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
- {
- /* Write the Dataflash buffer contents back to the Dataflash page */
- Dataflash_WaitWhileBusy();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
-
- /* Reset the Dataflash buffer counter, increment the page counter */
- CurrDFPageByteDiv16 = 0;
- CurrDFPage++;
-
- /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
- if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
- UsingSecondBuffer = !(UsingSecondBuffer);
-
- /* Select the next Dataflash chip based on the new Dataflash page index */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
- /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
- if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
- {
- /* Copy selected dataflash's current page contents to the Dataflash buffer */
- Dataflash_WaitWhileBusy();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
- Dataflash_WaitWhileBusy();
- }
-#endif
-
- /* Send the Dataflash buffer write command */
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
- Dataflash_SendAddressBytes(0, 0);
- }
-
- /* Write one 16-byte chunk of data to the Dataflash */
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
- Dataflash_SendByte(Endpoint_Read_8());
-
- /* Increment the Dataflash page 16 byte block counter */
- CurrDFPageByteDiv16++;
-
- /* Increment the block 16 byte block counter */
- BytesInBlockDiv16++;
-
- /* Check if the current command is being aborted by the host */
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return;
- }
-
- /* Decrement the blocks remaining counter */
- TotalBlocks--;
- }
-
- /* Write the Dataflash buffer contents back to the Dataflash page */
- Dataflash_WaitWhileBusy();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
- Dataflash_SendAddressBytes(CurrDFPage, 0x00);
- Dataflash_WaitWhileBusy();
-
- /* If the endpoint is empty, clear it ready for the next packet from the host */
- if (!(Endpoint_IsReadWriteAllowed()))
- Endpoint_ClearOUT();
-
- /* Deselect all Dataflash chips */
- Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- * the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- * and writes them in OS sized blocks to the endpoint.
- *
- * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state
- * \param[in] BlockAddress Data block starting address for the read sequence
- * \param[in] TotalBlocks Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
- const uint32_t BlockAddress,
- uint16_t TotalBlocks)
-{
- uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
- uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
- uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
- /* Select the correct starting Dataflash IC for the block requested */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
- /* Send the Dataflash main memory page read command */
- Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
- Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
-
- /* Wait until endpoint is ready before continuing */
- if (Endpoint_WaitUntilReady())
- return;
-
- while (TotalBlocks)
- {
- uint8_t BytesInBlockDiv16 = 0;
-
- /* Write an endpoint packet sized data block to the Dataflash */
- while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
- {
- /* Check if the endpoint is currently full */
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- /* Clear the endpoint bank to send its contents to the host */
- Endpoint_ClearIN();
-
- /* Wait until the endpoint is ready for more data */
- if (Endpoint_WaitUntilReady())
- return;
- }
-
- /* Check if end of Dataflash page reached */
- if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
- {
- /* Reset the Dataflash buffer counter, increment the page counter */
- CurrDFPageByteDiv16 = 0;
- CurrDFPage++;
-
- /* Select the next Dataflash chip based on the new Dataflash page index */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
- /* Send the Dataflash main memory page read command */
- Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- }
-
- /* Read one 16-byte chunk of data from the Dataflash */
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
- Endpoint_Write_8(Dataflash_ReceiveByte());
-
- /* Increment the Dataflash page 16 byte block counter */
- CurrDFPageByteDiv16++;
-
- /* Increment the block 16 byte block counter */
- BytesInBlockDiv16++;
-
- /* Check if the current command is being aborted by the host */
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return;
- }
-
- /* Decrement the blocks remaining counter */
- TotalBlocks--;
- }
-
- /* If the endpoint is full, send its contents to the host */
- if (!(Endpoint_IsReadWriteAllowed()))
- Endpoint_ClearIN();
-
- /* Deselect all Dataflash chips */
- Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- * the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- * Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- * Dataflash.
- *
- * \param[in] BlockAddress Data block starting address for the write sequence
- * \param[in] TotalBlocks Number of blocks of data to write
- * \param[in] BufferPtr Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
- uint16_t TotalBlocks,
- const uint8_t* BufferPtr)
-{
- uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
- uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
- uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
- bool UsingSecondBuffer = false;
-
- /* Select the correct starting Dataflash IC for the block requested */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
- /* Copy selected dataflash's current page contents to the Dataflash buffer */
- Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
- Dataflash_WaitWhileBusy();
-#endif
-
- /* Send the Dataflash buffer write command */
- Dataflash_SendByte(DF_CMD_BUFF1WRITE);
- Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
- while (TotalBlocks)
- {
- uint8_t BytesInBlockDiv16 = 0;
-
- /* Write an endpoint packet sized data block to the Dataflash */
- while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
- {
- /* Check if end of Dataflash page reached */
- if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
- {
- /* Write the Dataflash buffer contents back to the Dataflash page */
- Dataflash_WaitWhileBusy();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
-
- /* Reset the Dataflash buffer counter, increment the page counter */
- CurrDFPageByteDiv16 = 0;
- CurrDFPage++;
-
- /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
- if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
- UsingSecondBuffer = !(UsingSecondBuffer);
-
- /* Select the next Dataflash chip based on the new Dataflash page index */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
- /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
- if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
- {
- /* Copy selected dataflash's current page contents to the Dataflash buffer */
- Dataflash_WaitWhileBusy();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
- Dataflash_WaitWhileBusy();
- }
-#endif
-
- /* Send the Dataflash buffer write command */
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
- Dataflash_SendAddressBytes(0, 0);
- }
-
- /* Write one 16-byte chunk of data to the Dataflash */
- for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
- Dataflash_SendByte(*(BufferPtr++));
-
- /* Increment the Dataflash page 16 byte block counter */
- CurrDFPageByteDiv16++;
-
- /* Increment the block 16 byte block counter */
- BytesInBlockDiv16++;
- }
-
- /* Decrement the blocks remaining counter */
- TotalBlocks--;
- }
-
- /* Write the Dataflash buffer contents back to the Dataflash page */
- Dataflash_WaitWhileBusy();
- Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
- Dataflash_SendAddressBytes(CurrDFPage, 0x00);
- Dataflash_WaitWhileBusy();
-
- /* Deselect all Dataflash chips */
- Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- * the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- * and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- * the files stored on the Dataflash.
- *
- * \param[in] BlockAddress Data block starting address for the read sequence
- * \param[in] TotalBlocks Number of blocks of data to read
- * \param[out] BufferPtr Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
- uint16_t TotalBlocks,
- uint8_t* BufferPtr)
-{
- uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
- uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
- uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
- /* Select the correct starting Dataflash IC for the block requested */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
- /* Send the Dataflash main memory page read command */
- Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
- Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
-
- while (TotalBlocks)
- {
- uint8_t BytesInBlockDiv16 = 0;
-
- /* Write an endpoint packet sized data block to the Dataflash */
- while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
- {
- /* Check if end of Dataflash page reached */
- if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
- {
- /* Reset the Dataflash buffer counter, increment the page counter */
- CurrDFPageByteDiv16 = 0;
- CurrDFPage++;
-
- /* Select the next Dataflash chip based on the new Dataflash page index */
- Dataflash_SelectChipFromPage(CurrDFPage);
-
- /* Send the Dataflash main memory page read command */
- Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
- Dataflash_SendAddressBytes(CurrDFPage, 0);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- Dataflash_SendByte(0x00);
- }
-
- /* Read one 16-byte chunk of data from the Dataflash */
- for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
- *(BufferPtr++) = Dataflash_ReceiveByte();
-
- /* Increment the Dataflash page 16 byte block counter */
- CurrDFPageByteDiv16++;
-
- /* Increment the block 16 byte block counter */
- BytesInBlockDiv16++;
- }
-
- /* Decrement the blocks remaining counter */
- TotalBlocks--;
- }
-
- /* Deselect all Dataflash chips */
- Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
- /* Select first Dataflash chip, send the read status register command */
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- Dataflash_SendByte(DF_CMD_GETSTATUS);
-
- /* Check if sector protection is enabled */
- if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
- {
- Dataflash_ToggleSelectedChipCS();
-
- /* Send the commands to disable sector protection */
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
- }
-
- /* Select second Dataflash chip (if present on selected board), send read status register command */
- #if (DATAFLASH_TOTALCHIPS == 2)
- Dataflash_SelectChip(DATAFLASH_CHIP2);
- Dataflash_SendByte(DF_CMD_GETSTATUS);
-
- /* Check if sector protection is enabled */
- if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
- {
- Dataflash_ToggleSelectedChipCS();
-
- /* Send the commands to disable sector protection */
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
- Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
- }
- #endif
-
- /* Deselect current Dataflash chip */
- Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- * \return Boolean true if all media chips are working, false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
- uint8_t ReturnByte;
-
- /* Test first Dataflash IC is present and responding to commands */
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
- ReturnByte = Dataflash_ReceiveByte();
- Dataflash_DeselectChip();
-
- /* If returned data is invalid, fail the command */
- if (ReturnByte != DF_MANUFACTURER_ATMEL)
- return false;
-
- #if (DATAFLASH_TOTALCHIPS == 2)
- /* Test second Dataflash IC is present and responding to commands */
- Dataflash_SelectChip(DATAFLASH_CHIP2);
- Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
- ReturnByte = Dataflash_ReceiveByte();
- Dataflash_DeselectChip();
-
- /* If returned data is invalid, fail the command */
- if (ReturnByte != DF_MANUFACTURER_ATMEL)
- return false;
- #endif
-
- return true;
-}
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
- /* Includes: */
- #include <avr/io.h>
-
- #include "../StandaloneProgrammer.h"
- #include "../Descriptors.h"
-
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Board/Dataflash.h>
-
- /* Preprocessor Checks: */
- #if (DATAFLASH_PAGE_SIZE % 16)
- #error Dataflash page size must be a multiple of 16 bytes.
- #endif
-
- /* Defines: */
- /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
- #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
- /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
- * storage media (Dataflash) using a different native block size. Do not change this value.
- */
- #define VIRTUAL_MEMORY_BLOCK_SIZE 512
-
- /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
- * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
- */
- #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
- /** Indicates if the disk is write protected or not. */
- #define DISK_READ_ONLY false
-
- /* Function Prototypes: */
- #if defined(USB_CAN_BE_DEVICE)
- void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
- const uint32_t BlockAddress,
- uint16_t TotalBlocks);
- void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
- const uint32_t BlockAddress,
- uint16_t TotalBlocks);
- void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
- uint16_t TotalBlocks,
- const uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
- void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
- uint16_t TotalBlocks,
- uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
- void DataflashManager_ResetDataflashProtections(void);
- bool DataflashManager_CheckDataflashOperation(void);
- #endif
-
-#endif
-
+++ /dev/null
-Petit FatFs Module Source Files R0.02a (C)ChaN, 2010
-
-
-FILES
-
- pff.h Common include file for Petit FatFs and application module.
- pff.c Petit FatFs module.
- diskio.h Common include file for Petit FatFs and disk I/O module.
- diskio.c Skeleton of low level disk I/O module.
- integer.h Alternative type definitions for integer variables.
-
- Low level disk I/O module is not included in this archive because the Petit
- FatFs module is only a generic file system layer and not depend on any
- specific storage device. You have to provide a low level disk I/O module that
- written to control your storage device.
-
-
-
-AGREEMENTS
-
- Petit FatFs module is an open source software to implement FAT file system to
- small embedded systems. This is a free software and is opened for education,
- research and commercial developments under license policy of following trems.
-
- Copyright (C) 2010, ChaN, all right reserved.
-
- * The Petit FatFs module is a free software and there is NO WARRANTY.
- * No restriction on use. You can use, modify and redistribute it for
- personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY.
- * Redistributions of source code must retain the above copyright notice.
-
-
-
-REVISION HISTORY
-
- Jun 15, 2009 R0.01a First release (Branched from FatFs R0.07b)
- Dec 14, 2009 R0.02 Added multiple code page support.
- Added write funciton.
- Changed stream read mode interface.
- Dec 07,'2010 R0.02a Added some configuration options.
- Fixed fails to open objects with DBCS character.
-
+++ /dev/null
-/*-----------------------------------------------------------------------*/
-/* Low level disk I/O module skeleton for Petit FatFs (C)ChaN, 2009 */
-/*-----------------------------------------------------------------------*/
-
-#include "diskio.h"
-
-#include <string.h>
-#include <LUFA/Drivers/USB/USB.h>
-#include "../DataflashManager.h"
-#include "../../DiskHost.h"
-
-/*-----------------------------------------------------------------------*/
-/* Initialize Disk Drive */
-/*-----------------------------------------------------------------------*/
-
-DSTATUS disk_initialize (void)
-{
- return RES_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read Partial Sector */
-/*-----------------------------------------------------------------------*/
-
-DRESULT disk_readp (
- BYTE* dest, /* Pointer to the destination object */
- DWORD sector, /* Sector number (LBA) */
- WORD sofs, /* Offset in the sector */
- WORD count /* Byte count (bit15:destination) */
-)
-{
- DRESULT ErrorCode = RES_OK;
- uint8_t BlockTemp[512];
-
- if (USB_CurrentMode == USB_MODE_Host)
- {
- #if defined(USB_CAN_BE_HOST)
- if (USB_HostState != HOST_STATE_Configured)
- ErrorCode = RES_NOTRDY;
- else if (MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp))
- ErrorCode = RES_ERROR;
- #endif
- }
- else
- {
- #if defined(USB_CAN_BE_DEVICE)
- DataflashManager_ReadBlocks_RAM(sector, 1, BlockTemp);
- #endif
- }
-
- memcpy(dest, &BlockTemp[sofs], count);
-
- return ErrorCode;
-}
-
+++ /dev/null
-/*-----------------------------------------------------------------------
-/ PFF - Low level disk interface module include file (C)ChaN, 2010
-/-----------------------------------------------------------------------*/
-
-#ifndef _DISKIO
-
-#include "integer.h"
-
-
-/* Status of Disk Functions */
-typedef BYTE DSTATUS;
-
-
-/* Results of Disk Functions */
-typedef enum {
- RES_OK = 0, /* 0: Function succeeded */
- RES_ERROR, /* 1: Disk error */
- RES_NOTRDY, /* 2: Not ready */
- RES_PARERR /* 3: Invalid parameter */
-} DRESULT;
-
-
-/*---------------------------------------*/
-/* Prototypes for disk control functions */
-
-DSTATUS disk_initialize (void);
-DRESULT disk_readp (BYTE*, DWORD, WORD, WORD);
-
-#define STA_NOINIT 0x01 /* Drive not initialized */
-#define STA_NODISK 0x02 /* No medium in the drive */
-
-#define _DISKIO
-#endif
-
+++ /dev/null
-/*-------------------------------------------*/
-/* Integer type definitions for FatFs module */
-/*-------------------------------------------*/
-
-#ifndef _INTEGER
-#define _INTEGER
-
-#ifdef _WIN32 /* FatFs development platform */
-
-#include <windows.h>
-#include <tchar.h>
-
-#else /* Embedded platform */
-
-/* These types must be 16-bit, 32-bit or larger integer */
-typedef int INT;
-typedef unsigned int UINT;
-
-/* These types must be 8-bit integer */
-typedef char CHAR;
-typedef unsigned char UCHAR;
-typedef unsigned char BYTE;
-
-/* These types must be 16-bit integer */
-typedef short SHORT;
-typedef unsigned short USHORT;
-typedef unsigned short WORD;
-typedef unsigned short WCHAR;
-
-/* These types must be 32-bit integer */
-typedef long LONG;
-typedef unsigned long ULONG;
-typedef unsigned long DWORD;
-
-#endif
-
-#endif
-
+++ /dev/null
-/*----------------------------------------------------------------------------/
-/ Petit FatFs - FAT file system module R0.02a (C)ChaN, 2010
-/-----------------------------------------------------------------------------/
-/ Petit FatFs module is an open source software to implement FAT file system to
-/ small embedded systems. This is a free software and is opened for education,
-/ research and commercial developments under license policy of following trems.
-/
-/ Copyright (C) 2010, ChaN, all right reserved.
-/
-/ * The Petit FatFs module is a free software and there is NO WARRANTY.
-/ * No restriction on use. You can use, modify and redistribute it for
-/ personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY.
-/ * Redistributions of source code must retain the above copyright notice.
-/
-/-----------------------------------------------------------------------------/
-/ Jun 15,'09 R0.01a First release. (Branched from FatFs R0.07b.)
-/
-/ Dec 14,'09 R0.02 Added multiple code page support.
-/ Added write funciton.
-/ Changed stream read mode interface.
-/ Dec 07,'10 R0.02a Added some configuration options.
-/ Fixed fails to open objects with DBCS character.
-/----------------------------------------------------------------------------*/
-
-#include "pff.h" /* Petit FatFs configurations and declarations */
-#include "diskio.h" /* Declarations of low level disk I/O functions */
-
-
-
-/*--------------------------------------------------------------------------
-
- Module Private Definitions
-
----------------------------------------------------------------------------*/
-
-
-#if _FS_FAT32
-#define LD_CLUST(dir) (((DWORD)LD_WORD(dir+DIR_FstClusHI)<<16) | LD_WORD(dir+DIR_FstClusLO))
-#else
-#define LD_CLUST(dir) LD_WORD(dir+DIR_FstClusLO)
-#endif
-
-
-/*--------------------------------------------------------*/
-/* DBCS code ranges and SBCS extend char conversion table */
-
-#if _CODE_PAGE == 932 /* Japanese Shift-JIS */
-#define _DF1S 0x81 /* DBC 1st byte range 1 start */
-#define _DF1E 0x9F /* DBC 1st byte range 1 end */
-#define _DF2S 0xE0 /* DBC 1st byte range 2 start */
-#define _DF2E 0xFC /* DBC 1st byte range 2 end */
-#define _DS1S 0x40 /* DBC 2nd byte range 1 start */
-#define _DS1E 0x7E /* DBC 2nd byte range 1 end */
-#define _DS2S 0x80 /* DBC 2nd byte range 2 start */
-#define _DS2E 0xFC /* DBC 2nd byte range 2 end */
-
-#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */
-#define _DF1S 0x81
-#define _DF1E 0xFE
-#define _DS1S 0x40
-#define _DS1E 0x7E
-#define _DS2S 0x80
-#define _DS2E 0xFE
-
-#elif _CODE_PAGE == 949 /* Korean */
-#define _DF1S 0x81
-#define _DF1E 0xFE
-#define _DS1S 0x41
-#define _DS1E 0x5A
-#define _DS2S 0x61
-#define _DS2E 0x7A
-#define _DS3S 0x81
-#define _DS3E 0xFE
-
-#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */
-#define _DF1S 0x81
-#define _DF1E 0xFE
-#define _DS1S 0x40
-#define _DS1E 0x7E
-#define _DS2S 0xA1
-#define _DS2E 0xFE
-
-#elif _CODE_PAGE == 437 /* U.S. (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 720 /* Arabic (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 737 /* Greek (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \
- 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 775 /* Baltic (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
- 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 850 /* Multilingual Latin 1 (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
- 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 852 /* Latin 2 (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \
- 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF}
-
-#elif _CODE_PAGE == 855 /* Cyrillic (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \
- 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \
- 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 857 /* Turkish (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \
- 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 858 /* Multilingual Latin 1 + Euro (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
- 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 862 /* Hebrew (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 866 /* Russian (OEM) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 874 /* Thai (OEM, Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
- 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
-
-#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
- 0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF}
-
-#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \
- 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
-
-#elif _CODE_PAGE == 1253 /* Greek (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \
- 0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF}
-
-#elif _CODE_PAGE == 1254 /* Turkish (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \
- 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
-
-#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1256 /* Arabic (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \
- 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1257 /* Baltic (Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
- 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
-
-#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */
-#define _DF1S 0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \
- 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
- 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F}
-
-#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */
-#define _DF1S 0
-
-#else
-#error Unknown code page
-
-#endif
-
-
-
-/* Character code support macros */
-
-#define IsUpper(c) (((c)>='A')&&((c)<='Z'))
-#define IsLower(c) (((c)>='a')&&((c)<='z'))
-
-#if _DF1S /* DBCS configuration */
-
-#ifdef _DF2S /* Two 1st byte areas */
-#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E))
-#else /* One 1st byte area */
-#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E)
-#endif
-
-#ifdef _DS3S /* Three 2nd byte areas */
-#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E))
-#else /* Two 2nd byte areas */
-#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E))
-#endif
-
-#else /* SBCS configuration */
-
-#define IsDBCS1(c) 0
-#define IsDBCS2(c) 0
-
-#endif /* _DF1S */
-
-
-/* FatFs refers the members in the FAT structures with byte offset instead
-/ of structure member because there are incompatibility of the packing option
-/ between various compilers. */
-
-#define BS_jmpBoot 0
-#define BS_OEMName 3
-#define BPB_BytsPerSec 11
-#define BPB_SecPerClus 13
-#define BPB_RsvdSecCnt 14
-#define BPB_NumFATs 16
-#define BPB_RootEntCnt 17
-#define BPB_TotSec16 19
-#define BPB_Media 21
-#define BPB_FATSz16 22
-#define BPB_SecPerTrk 24
-#define BPB_NumHeads 26
-#define BPB_HiddSec 28
-#define BPB_TotSec32 32
-#define BS_55AA 510
-
-#define BS_DrvNum 36
-#define BS_BootSig 38
-#define BS_VolID 39
-#define BS_VolLab 43
-#define BS_FilSysType 54
-
-#define BPB_FATSz32 36
-#define BPB_ExtFlags 40
-#define BPB_FSVer 42
-#define BPB_RootClus 44
-#define BPB_FSInfo 48
-#define BPB_BkBootSec 50
-#define BS_DrvNum32 64
-#define BS_BootSig32 66
-#define BS_VolID32 67
-#define BS_VolLab32 71
-#define BS_FilSysType32 82
-
-#define MBR_Table 446
-
-#define DIR_Name 0
-#define DIR_Attr 11
-#define DIR_NTres 12
-#define DIR_CrtTime 14
-#define DIR_CrtDate 16
-#define DIR_FstClusHI 20
-#define DIR_WrtTime 22
-#define DIR_WrtDate 24
-#define DIR_FstClusLO 26
-#define DIR_FileSize 28
-
-
-
-/*--------------------------------------------------------------------------
-
- Private Functions
-
----------------------------------------------------------------------------*/
-
-
-static
-FATFS *FatFs; /* Pointer to the file system object (logical drive) */
-
-
-/* Fill memory */
-static
-void mem_set (void* dst, int val, int cnt) {
- char *d = (char*)dst;
- while (cnt--) *d++ = (char)val;
-}
-
-/* Compare memory to memory */
-static
-int mem_cmp (const void* dst, const void* src, int cnt) {
- const char *d = (const char *)dst, *s = (const char *)src;
- int r = 0;
- while (cnt-- && (r = *d++ - *s++) == 0) ;
- return r;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT access - Read value of a FAT entry */
-/*-----------------------------------------------------------------------*/
-
-static
-CLUST get_fat ( /* 1:IO error, Else:Cluster status */
- CLUST clst /* Cluster# to get the link information */
-)
-{
- WORD wc, bc, ofs;
- BYTE buf[4];
- FATFS *fs = FatFs;
-
-
- if (clst < 2 || clst >= fs->n_fatent) /* Range check */
- return 1;
-
- switch (fs->fs_type) {
-#if _FS_FAT12
- case FS_FAT12 :
- bc = (WORD)clst; bc += bc / 2;
- ofs = bc % 512; bc /= 512;
- if (ofs != 511) {
- if (disk_readp(buf, fs->fatbase + bc, ofs, 2)) break;
- } else {
- if (disk_readp(buf, fs->fatbase + bc, 511, 1)) break;
- if (disk_readp(buf+1, fs->fatbase + bc + 1, 0, 1)) break;
- }
- wc = LD_WORD(buf);
- return (clst & 1) ? (wc >> 4) : (wc & 0xFFF);
-#endif
- case FS_FAT16 :
- if (disk_readp(buf, fs->fatbase + clst / 256, (WORD)(((WORD)clst % 256) * 2), 2)) break;
- return LD_WORD(buf);
-#if _FS_FAT32
- case FS_FAT32 :
- if (disk_readp(buf, fs->fatbase + clst / 128, (WORD)(((WORD)clst % 128) * 4), 4)) break;
- return LD_DWORD(buf) & 0x0FFFFFFF;
-#endif
- }
-
- return 1; /* An error occured at the disk I/O layer */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Get sector# from cluster# */
-/*-----------------------------------------------------------------------*/
-
-static
-DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */
- CLUST clst /* Cluster# to be converted */
-)
-{
- FATFS *fs = FatFs;
-
-
- clst -= 2;
- if (clst >= (fs->n_fatent - 2)) return 0; /* Invalid cluster# */
- return (DWORD)clst * fs->csize + fs->database;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Rewind directory index */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_rewind (
- DIR *dj /* Pointer to directory object */
-)
-{
- CLUST clst;
- FATFS *fs = FatFs;
-
-
- dj->index = 0;
- clst = dj->sclust;
- if (clst == 1 || clst >= fs->n_fatent) /* Check start cluster range */
- return FR_DISK_ERR;
- if (_FS_FAT32 && !clst && fs->fs_type == FS_FAT32) /* Replace cluster# 0 with root cluster# if in FAT32 */
- clst = (CLUST)fs->dirbase;
- dj->clust = clst; /* Current cluster */
- dj->sect = clst ? clust2sect(clst) : fs->dirbase; /* Current sector */
-
- return FR_OK; /* Seek succeeded */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Move directory index next */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_next ( /* FR_OK:Succeeded, FR_NO_FILE:End of table */
- DIR *dj /* Pointer to directory object */
-)
-{
- CLUST clst;
- WORD i;
- FATFS *fs = FatFs;
-
-
- i = dj->index + 1;
- if (!i || !dj->sect) /* Report EOT when index has reached 65535 */
- return FR_NO_FILE;
-
- if (!(i % 16)) { /* Sector changed? */
- dj->sect++; /* Next sector */
-
- if (dj->clust == 0) { /* Static table */
- if (i >= fs->n_rootdir) /* Report EOT when end of table */
- return FR_NO_FILE;
- }
- else { /* Dynamic table */
- if (((i / 16) & (fs->csize-1)) == 0) { /* Cluster changed? */
- clst = get_fat(dj->clust); /* Get next cluster */
- if (clst <= 1) return FR_DISK_ERR;
- if (clst >= fs->n_fatent) /* When it reached end of dynamic table */
- return FR_NO_FILE; /* Report EOT */
- dj->clust = clst; /* Initialize data for new cluster */
- dj->sect = clust2sect(clst);
- }
- }
- }
-
- dj->index = i;
-
- return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Find an object in the directory */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_find (
- DIR *dj, /* Pointer to the directory object linked to the file name */
- BYTE *dir /* 32-byte working buffer */
-)
-{
- FRESULT res;
- BYTE c;
-
-
- res = dir_rewind(dj); /* Rewind directory object */
- if (res != FR_OK) return res;
-
- do {
- res = disk_readp(dir, dj->sect, (WORD)((dj->index % 16) * 32), 32) /* Read an entry */
- ? FR_DISK_ERR : FR_OK;
- if (res != FR_OK) break;
- c = dir[DIR_Name]; /* First character */
- if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */
- if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */
- break;
- res = dir_next(dj); /* Next entry */
- } while (res == FR_OK);
-
- return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read an object from the directory */
-/*-----------------------------------------------------------------------*/
-#if _USE_DIR
-static
-FRESULT dir_read (
- DIR *dj, /* Pointer to the directory object to store read object name */
- BYTE *dir /* 32-byte working buffer */
-)
-{
- FRESULT res;
- BYTE a, c;
-
-
- res = FR_NO_FILE;
- while (dj->sect) {
- res = disk_readp(dir, dj->sect, (WORD)((dj->index % 16) * 32), 32) /* Read an entry */
- ? FR_DISK_ERR : FR_OK;
- if (res != FR_OK) break;
- c = dir[DIR_Name];
- if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */
- a = dir[DIR_Attr] & AM_MASK;
- if (c != 0xE5 && c != '.' && !(a & AM_VOL)) /* Is it a valid entry? */
- break;
- res = dir_next(dj); /* Next entry */
- if (res != FR_OK) break;
- }
-
- if (res != FR_OK) dj->sect = 0;
-
- return res;
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Pick a segment and create the object name in directory form */
-/*-----------------------------------------------------------------------*/
-
-#ifdef _EXCVT
- static const BYTE cvt[] = _EXCVT;
-#endif
-
-static
-FRESULT create_name (
- DIR *dj, /* Pointer to the directory object */
- const char **path /* Pointer to pointer to the segment in the path string */
-)
-{
- BYTE c, d, ni, si, i, *sfn;
- const char *p;
-
- /* Create file name in directory form */
- sfn = dj->fn;
- mem_set(sfn, ' ', 11);
- si = i = 0; ni = 8;
- p = *path;
- for (;;) {
- c = p[si++];
- if (c <= ' ' || c == '/') break; /* Break on end of segment */
- if (c == '.' || i >= ni) {
- if (ni != 8 || c != '.') break;
- i = 8; ni = 11;
- continue;
- }
-#ifdef _EXCVT
- if (c >= 0x80) /* To upper extended char (SBCS) */
- c = cvt[c - 0x80];
-#endif
- if (IsDBCS1(c) && i < ni - 1) { /* DBC 1st byte? */
- d = p[si++]; /* Get 2nd byte */
- sfn[i++] = c;
- sfn[i++] = d;
- } else { /* Single byte code */
- if (IsLower(c)) c -= 0x20; /* toupper */
- sfn[i++] = c;
- }
- }
- *path = &p[si]; /* Rerurn pointer to the next segment */
-
- sfn[11] = (c <= ' ') ? 1 : 0; /* Set last segment flag if end of path */
-
- return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Get file information from directory entry */
-/*-----------------------------------------------------------------------*/
-#if _USE_DIR
-static
-void get_fileinfo ( /* No return code */
- DIR *dj, /* Pointer to the directory object */
- BYTE *dir, /* 32-byte working buffer */
- FILINFO *fno /* Pointer to store the file information */
-)
-{
- BYTE i, c;
- char *p;
-
-
- p = fno->fname;
- if (dj->sect) {
- for (i = 0; i < 8; i++) { /* Copy file name body */
- c = dir[i];
- if (c == ' ') break;
- if (c == 0x05) c = 0xE5;
- *p++ = c;
- }
- if (dir[8] != ' ') { /* Copy file name extension */
- *p++ = '.';
- for (i = 8; i < 11; i++) {
- c = dir[i];
- if (c == ' ') break;
- *p++ = c;
- }
- }
- fno->fattrib = dir[DIR_Attr]; /* Attribute */
- fno->fsize = LD_DWORD(dir+DIR_FileSize); /* Size */
- fno->fdate = LD_WORD(dir+DIR_WrtDate); /* Date */
- fno->ftime = LD_WORD(dir+DIR_WrtTime); /* Time */
- }
- *p = 0;
-}
-#endif /* _USE_DIR */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Follow a file path */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */
- DIR *dj, /* Directory object to return last directory and found object */
- BYTE *dir, /* 32-byte working buffer */
- const char *path /* Full-path string to find a file or directory */
-)
-{
- FRESULT res;
-
-
- while (*path == ' ') path++; /* Skip leading spaces */
- if (*path == '/') path++; /* Strip heading separator */
- dj->sclust = 0; /* Set start directory (always root dir) */
-
- if ((BYTE)*path <= ' ') { /* Null path means the root directory */
- res = dir_rewind(dj);
- dir[0] = 0;
-
- } else { /* Follow path */
- for (;;) {
- res = create_name(dj, &path); /* Get a segment */
- if (res != FR_OK) break;
- res = dir_find(dj, dir); /* Find it */
- if (res != FR_OK) { /* Could not find the object */
- if (res == FR_NO_FILE && !*(dj->fn+11))
- res = FR_NO_PATH;
- break;
- }
- if (*(dj->fn+11)) break; /* Last segment match. Function completed. */
- if (!(dir[DIR_Attr] & AM_DIR)) { /* Cannot follow because it is a file */
- res = FR_NO_PATH; break;
- }
- dj->sclust = LD_CLUST(dir);
- }
- }
-
- return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Check a sector if it is an FAT boot record */
-/*-----------------------------------------------------------------------*/
-
-static
-BYTE check_fs ( /* 0:The FAT boot record, 1:Valid boot record but not an FAT, 2:Not a boot record, 3:Error */
- BYTE *buf, /* Working buffer */
- DWORD sect /* Sector# (lba) to check if it is an FAT boot record or not */
-)
-{
- if (disk_readp(buf, sect, 510, 2)) /* Read the boot sector */
- return 3;
- if (LD_WORD(buf) != 0xAA55) /* Check record signature */
- return 2;
-
- if (!disk_readp(buf, sect, BS_FilSysType, 2) && LD_WORD(buf) == 0x4146) /* Check FAT12/16 */
- return 0;
- if (_FS_FAT32 && !disk_readp(buf, sect, BS_FilSysType32, 2) && LD_WORD(buf) == 0x4146) /* Check FAT32 */
- return 0;
- return 1;
-}
-
-
-
-
-/*--------------------------------------------------------------------------
-
- Public Functions
-
---------------------------------------------------------------------------*/
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Mount/Unmount a Locical Drive */
-/*-----------------------------------------------------------------------*/
-
-FRESULT pf_mount (
- FATFS *fs /* Pointer to new file system object (NULL: Unmount) */
-)
-{
- BYTE fmt, buf[36];
- DWORD bsect, fsize, tsect, mclst;
-
-
- FatFs = 0;
- if (!fs) return FR_OK; /* Unregister fs object */
-
- if (disk_initialize() & STA_NOINIT) /* Check if the drive is ready or not */
- return FR_NOT_READY;
-
- /* Search FAT partition on the drive */
- bsect = 0;
- fmt = check_fs(buf, bsect); /* Check sector 0 as an SFD format */
- if (fmt == 1) { /* Not an FAT boot record, it may be FDISK format */
- /* Check a partition listed in top of the partition table */
- if (disk_readp(buf, bsect, MBR_Table, 16)) { /* 1st partition entry */
- fmt = 3;
- } else {
- if (buf[4]) { /* Is the partition existing? */
- bsect = LD_DWORD(&buf[8]); /* Partition offset in LBA */
- fmt = check_fs(buf, bsect); /* Check the partition */
- }
- }
- }
- if (fmt == 3) return FR_DISK_ERR;
- if (fmt) return FR_NO_FILESYSTEM; /* No valid FAT patition is found */
-
- /* Initialize the file system object */
- if (disk_readp(buf, bsect, 13, sizeof(buf))) return FR_DISK_ERR;
-
- fsize = LD_WORD(buf+BPB_FATSz16-13); /* Number of sectors per FAT */
- if (!fsize) fsize = LD_DWORD(buf+BPB_FATSz32-13);
-
- fsize *= buf[BPB_NumFATs-13]; /* Number of sectors in FAT area */
- fs->fatbase = bsect + LD_WORD(buf+BPB_RsvdSecCnt-13); /* FAT start sector (lba) */
- fs->csize = buf[BPB_SecPerClus-13]; /* Number of sectors per cluster */
- fs->n_rootdir = LD_WORD(buf+BPB_RootEntCnt-13); /* Nmuber of root directory entries */
- tsect = LD_WORD(buf+BPB_TotSec16-13); /* Number of sectors on the file system */
- if (!tsect) tsect = LD_DWORD(buf+BPB_TotSec32-13);
- mclst = (tsect /* Last cluster# + 1 */
- - LD_WORD(buf+BPB_RsvdSecCnt-13) - fsize - fs->n_rootdir / 16
- ) / fs->csize + 2;
- fs->n_fatent = (CLUST)mclst;
-
- fmt = FS_FAT16; /* Determine the FAT sub type */
- if (mclst < 0xFF7) /* Number of clusters < 0xFF5 */
-#if _FS_FAT12
- fmt = FS_FAT12;
-#else
- return FR_NO_FILESYSTEM;
-#endif
- if (mclst >= 0xFFF7) /* Number of clusters >= 0xFFF5 */
-#if _FS_FAT32
- fmt = FS_FAT32;
-#else
- return FR_NO_FILESYSTEM;
-#endif
-
- fs->fs_type = fmt; /* FAT sub-type */
- if (_FS_FAT32 && fmt == FS_FAT32)
- fs->dirbase = LD_DWORD(buf+(BPB_RootClus-13)); /* Root directory start cluster */
- else
- fs->dirbase = fs->fatbase + fsize; /* Root directory start sector (lba) */
- fs->database = fs->fatbase + fsize + fs->n_rootdir / 16; /* Data start sector (lba) */
-
- fs->flag = 0;
- FatFs = fs;
-
- return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Open or Create a File */
-/*-----------------------------------------------------------------------*/
-
-FRESULT pf_open (
- const char *path /* Pointer to the file name */
-)
-{
- FRESULT res;
- DIR dj;
- BYTE sp[12], dir[32];
- FATFS *fs = FatFs;
-
-
- if (!fs) /* Check file system */
- return FR_NOT_ENABLED;
-
- fs->flag = 0;
- dj.fn = sp;
- res = follow_path(&dj, dir, path); /* Follow the file path */
- if (res != FR_OK) return res; /* Follow failed */
- if (!dir[0] || (dir[DIR_Attr] & AM_DIR)) /* It is a directory */
- return FR_NO_FILE;
-
- fs->org_clust = LD_CLUST(dir); /* File start cluster */
- fs->fsize = LD_DWORD(dir+DIR_FileSize); /* File size */
- fs->fptr = 0; /* File pointer */
- fs->flag = FA_OPENED;
-
- return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read File */
-/*-----------------------------------------------------------------------*/
-#if _USE_READ
-
-FRESULT pf_read (
- void* buff, /* Pointer to the read buffer (NULL:Forward data to the stream)*/
- WORD btr, /* Number of bytes to read */
- WORD* br /* Pointer to number of bytes read */
-)
-{
- DRESULT dr;
- CLUST clst;
- DWORD sect, remain;
- WORD rcnt;
- BYTE cs, *rbuff = buff;
- FATFS *fs = FatFs;
-
-
- *br = 0;
- if (!fs) return FR_NOT_ENABLED; /* Check file system */
- if (!(fs->flag & FA_OPENED)) /* Check if opened */
- return FR_NOT_OPENED;
-
- remain = fs->fsize - fs->fptr;
- if (btr > remain) btr = (WORD)remain; /* Truncate btr by remaining bytes */
-
- while (btr) { /* Repeat until all data transferred */
- if ((fs->fptr % 512) == 0) { /* On the sector boundary? */
- cs = (BYTE)(fs->fptr / 512 & (fs->csize - 1)); /* Sector offset in the cluster */
- if (!cs) { /* On the cluster boundary? */
- clst = (fs->fptr == 0) ? /* On the top of the file? */
- fs->org_clust : get_fat(fs->curr_clust);
- if (clst <= 1) goto fr_abort;
- fs->curr_clust = clst; /* Update current cluster */
- }
- sect = clust2sect(fs->curr_clust); /* Get current sector */
- if (!sect) goto fr_abort;
- fs->dsect = sect + cs;
- }
- rcnt = (WORD)(512 - (fs->fptr % 512)); /* Get partial sector data from sector buffer */
- if (rcnt > btr) rcnt = btr;
- dr = disk_readp(!buff ? 0 : rbuff, fs->dsect, (WORD)(fs->fptr % 512), rcnt);
- if (dr) goto fr_abort;
- fs->fptr += rcnt; rbuff += rcnt; /* Update pointers and counters */
- btr -= rcnt; *br += rcnt;
- }
-
- return FR_OK;
-
-fr_abort:
- fs->flag = 0;
- return FR_DISK_ERR;
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Write File */
-/*-----------------------------------------------------------------------*/
-#if _USE_WRITE
-
-FRESULT pf_write (
- const void* buff, /* Pointer to the data to be written */
- WORD btw, /* Number of bytes to write (0:Finalize the current write operation) */
- WORD* bw /* Pointer to number of bytes written */
-)
-{
- CLUST clst;
- DWORD sect, remain;
- const BYTE *p = buff;
- BYTE cs;
- WORD wcnt;
- FATFS *fs = FatFs;
-
-
- *bw = 0;
- if (!fs) return FR_NOT_ENABLED; /* Check file system */
- if (!(fs->flag & FA_OPENED)) /* Check if opened */
- return FR_NOT_OPENED;
-
- if (!btw) { /* Finalize request */
- if ((fs->flag & FA__WIP) && disk_writep(0, 0)) goto fw_abort;
- fs->flag &= ~FA__WIP;
- return FR_OK;
- } else { /* Write data request */
- if (!(fs->flag & FA__WIP)) /* Round-down fptr to the sector boundary */
- fs->fptr &= 0xFFFFFE00;
- }
- remain = fs->fsize - fs->fptr;
- if (btw > remain) btw = (WORD)remain; /* Truncate btw by remaining bytes */
-
- while (btw) { /* Repeat until all data transferred */
- if (((WORD)fs->fptr % 512) == 0) { /* On the sector boundary? */
- cs = (BYTE)(fs->fptr / 512 & (fs->csize - 1)); /* Sector offset in the cluster */
- if (!cs) { /* On the cluster boundary? */
- clst = (fs->fptr == 0) ? /* On the top of the file? */
- fs->org_clust : get_fat(fs->curr_clust);
- if (clst <= 1) goto fw_abort;
- fs->curr_clust = clst; /* Update current cluster */
- }
- sect = clust2sect(fs->curr_clust); /* Get current sector */
- if (!sect) goto fw_abort;
- fs->dsect = sect + cs;
- if (disk_writep(0, fs->dsect)) goto fw_abort; /* Initiate a sector write operation */
- fs->flag |= FA__WIP;
- }
- wcnt = 512 - ((WORD)fs->fptr % 512); /* Number of bytes to write to the sector */
- if (wcnt > btw) wcnt = btw;
- if (disk_writep(p, wcnt)) goto fw_abort; /* Send data to the sector */
- fs->fptr += wcnt; p += wcnt; /* Update pointers and counters */
- btw -= wcnt; *bw += wcnt;
- if (((WORD)fs->fptr % 512) == 0) {
- if (disk_writep(0, 0)) goto fw_abort; /* Finalize the currtent secter write operation */
- fs->flag &= ~FA__WIP;
- }
- }
-
- return FR_OK;
-
-fw_abort:
- fs->flag = 0;
- return FR_DISK_ERR;
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Seek File R/W Pointer */
-/*-----------------------------------------------------------------------*/
-#if _USE_LSEEK
-
-FRESULT pf_lseek (
- DWORD ofs /* File pointer from top of file */
-)
-{
- CLUST clst;
- DWORD bcs, sect, ifptr;
- FATFS *fs = FatFs;
-
-
- if (!fs) return FR_NOT_ENABLED; /* Check file system */
- if (!(fs->flag & FA_OPENED)) /* Check if opened */
- return FR_NOT_OPENED;
-
- if (ofs > fs->fsize) ofs = fs->fsize; /* Clip offset with the file size */
- ifptr = fs->fptr;
- fs->fptr = 0;
- if (ofs > 0) {
- bcs = (DWORD)fs->csize * 512; /* Cluster size (byte) */
- if (ifptr > 0 &&
- (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */
- fs->fptr = (ifptr - 1) & ~(bcs - 1); /* start from the current cluster */
- ofs -= fs->fptr;
- clst = fs->curr_clust;
- } else { /* When seek to back cluster, */
- clst = fs->org_clust; /* start from the first cluster */
- fs->curr_clust = clst;
- }
- while (ofs > bcs) { /* Cluster following loop */
- clst = get_fat(clst); /* Follow cluster chain */
- if (clst <= 1 || clst >= fs->n_fatent) goto fe_abort;
- fs->curr_clust = clst;
- fs->fptr += bcs;
- ofs -= bcs;
- }
- fs->fptr += ofs;
- sect = clust2sect(clst); /* Current sector */
- if (!sect) goto fe_abort;
- fs->dsect = sect + (fs->fptr / 512 & (fs->csize - 1));
- }
-
- return FR_OK;
-
-fe_abort:
- fs->flag = 0;
- return FR_DISK_ERR;
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Create a Directroy Object */
-/*-----------------------------------------------------------------------*/
-#if _USE_DIR
-
-FRESULT pf_opendir (
- DIR *dj, /* Pointer to directory object to create */
- const char *path /* Pointer to the directory path */
-)
-{
- FRESULT res;
- BYTE sp[12], dir[32];
- FATFS *fs = FatFs;
-
-
- if (!fs) { /* Check file system */
- res = FR_NOT_ENABLED;
- } else {
- dj->fn = sp;
- res = follow_path(dj, dir, path); /* Follow the path to the directory */
- if (res == FR_OK) { /* Follow completed */
- if (dir[0]) { /* It is not the root dir */
- if (dir[DIR_Attr] & AM_DIR) /* The object is a directory */
- dj->sclust = LD_CLUST(dir);
- else /* The object is not a directory */
- res = FR_NO_PATH;
- }
- if (res == FR_OK)
- res = dir_rewind(dj); /* Rewind dir */
- }
- if (res == FR_NO_FILE) res = FR_NO_PATH;
- }
-
- return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read Directory Entry in Sequense */
-/*-----------------------------------------------------------------------*/
-
-FRESULT pf_readdir (
- DIR *dj, /* Pointer to the open directory object */
- FILINFO *fno /* Pointer to file information to return */
-)
-{
- FRESULT res;
- BYTE sp[12], dir[32];
- FATFS *fs = FatFs;
-
-
- if (!fs) { /* Check file system */
- res = FR_NOT_ENABLED;
- } else {
- dj->fn = sp;
- if (!fno) {
- res = dir_rewind(dj);
- } else {
- res = dir_read(dj, dir);
- if (res == FR_NO_FILE) {
- dj->sect = 0;
- res = FR_OK;
- }
- if (res == FR_OK) { /* A valid entry is found */
- get_fileinfo(dj, dir, fno); /* Get the object information */
- res = dir_next(dj); /* Increment index for next */
- if (res == FR_NO_FILE) {
- dj->sect = 0;
- res = FR_OK;
- }
- }
- }
- }
-
- return res;
-}
-
-#endif /* _USE_DIR */
-
+++ /dev/null
-/*---------------------------------------------------------------------------/
-/ Petit FatFs - FAT file system module include file R0.02a (C)ChaN, 2010
-/----------------------------------------------------------------------------/
-/ Petit FatFs module is an open source software to implement FAT file system to
-/ small embedded systems. This is a free software and is opened for education,
-/ research and commercial developments under license policy of following trems.
-/
-/ Copyright (C) 2010, ChaN, all right reserved.
-/
-/ * The Petit FatFs module is a free software and there is NO WARRANTY.
-/ * No restriction on use. You can use, modify and redistribute it for
-/ personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY.
-/ * Redistributions of source code must retain the above copyright notice.
-/
-/----------------------------------------------------------------------------*/
-
-#include "integer.h"
-
-/*---------------------------------------------------------------------------/
-/ Petit FatFs Configuration Options
-/
-/ CAUTION! Do not forget to make clean the project after any changes to
-/ the configuration options.
-/
-/----------------------------------------------------------------------------*/
-#ifndef _FATFS
-#define _FATFS
-
-#define _USE_READ 1 /* 1:Enable pf_read() */
-
-#define _USE_DIR 0 /* 1:Enable pf_opendir() and pf_readdir() */
-
-#define _USE_LSEEK 0 /* 1:Enable pf_lseek() */
-
-#define _USE_WRITE 0 /* 1:Enable pf_write() */
-
-#define _FS_FAT12 1 /* 1:Enable FAT12 support */
-#define _FS_FAT32 0 /* 1:Enable FAT32 support */
-
-
-#define _CODE_PAGE 1
-/* Defines which code page is used for path name. Supported code pages are:
-/ 932, 936, 949, 950, 437, 720, 737, 775, 850, 852, 855, 857, 858, 862, 866,
-/ 874, 1250, 1251, 1252, 1253, 1254, 1255, 1257, 1258 and 1 (ASCII only).
-/ SBCS code pages except for 1 requiers a case conversion table. This
-/ might occupy 128 bytes on the RAM on some platforms, e.g. avr-gcc. */
-
-
-#define _WORD_ACCESS 0
-/* The _WORD_ACCESS option defines which access method is used to the word
-/ data in the FAT structure.
-/
-/ 0: Byte-by-byte access. Always compatible with all platforms.
-/ 1: Word access. Do not choose this unless following condition is met.
-/
-/ When the byte order on the memory is big-endian or address miss-aligned
-/ word access results incorrect behavior, the _WORD_ACCESS must be set to 0.
-/ If it is not the case, the value can also be set to 1 to improve the
-/ performance and code efficiency. */
-
-
-/* End of configuration options. Do not change followings without care. */
-/*--------------------------------------------------------------------------*/
-
-
-
-#if _FS_FAT32
-#define CLUST DWORD
-#else
-#define CLUST WORD
-#endif
-
-
-/* File system object structure */
-
-typedef struct {
- BYTE fs_type; /* FAT sub type */
- BYTE flag; /* File status flags */
- BYTE csize; /* Number of sectors per cluster */
- BYTE pad1;
- WORD n_rootdir; /* Number of root directory entries (0 on FAT32) */
- CLUST n_fatent; /* Number of FAT entries (= number of clusters + 2) */
- DWORD fatbase; /* FAT start sector */
- DWORD dirbase; /* Root directory start sector (Cluster# on FAT32) */
- DWORD database; /* Data start sector */
- DWORD fptr; /* File R/W pointer */
- DWORD fsize; /* File size */
- CLUST org_clust; /* File start cluster */
- CLUST curr_clust; /* File current cluster */
- DWORD dsect; /* File current data sector */
-} FATFS;
-
-
-
-/* Directory object structure */
-
-typedef struct {
- WORD index; /* Current read/write index number */
- BYTE* fn; /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
- CLUST sclust; /* Table start cluster (0:Static table) */
- CLUST clust; /* Current cluster */
- DWORD sect; /* Current sector */
-} DIR;
-
-
-
-/* File status structure */
-
-typedef struct {
- DWORD fsize; /* File size */
- WORD fdate; /* Last modified date */
- WORD ftime; /* Last modified time */
- BYTE fattrib; /* Attribute */
- char fname[13]; /* File name */
-} FILINFO;
-
-
-
-/* File function return code (FRESULT) */
-
-typedef enum {
- FR_OK = 0, /* 0 */
- FR_DISK_ERR, /* 1 */
- FR_NOT_READY, /* 2 */
- FR_NO_FILE, /* 3 */
- FR_NO_PATH, /* 4 */
- FR_NOT_OPENED, /* 5 */
- FR_NOT_ENABLED, /* 6 */
- FR_NO_FILESYSTEM /* 7 */
-} FRESULT;
-
-
-
-/*--------------------------------------------------------------*/
-/* Petit FatFs module application interface */
-
-FRESULT pf_mount (FATFS*); /* Mount/Unmount a logical drive */
-FRESULT pf_open (const char*); /* Open a file */
-FRESULT pf_read (void*, WORD, WORD*); /* Read data from the open file */
-FRESULT pf_write (const void*, WORD, WORD*); /* Write data to the open file */
-FRESULT pf_lseek (DWORD); /* Move file pointer of the open file */
-FRESULT pf_opendir (DIR*, const char*); /* Open a directory */
-FRESULT pf_readdir (DIR*, FILINFO*); /* Read a directory item from the open directory */
-
-
-
-/*--------------------------------------------------------------*/
-/* Flags and offset address */
-
-/* File status flag (FATFS.flag) */
-
-#define FA_OPENED 0x01
-#define FA_WPRT 0x02
-#define FA__WIP 0x40
-
-
-/* FAT sub type (FATFS.fs_type) */
-
-#define FS_FAT12 1
-#define FS_FAT16 2
-#define FS_FAT32 3
-
-
-/* File attribute bits for directory entry */
-
-#define AM_RDO 0x01 /* Read only */
-#define AM_HID 0x02 /* Hidden */
-#define AM_SYS 0x04 /* System */
-#define AM_VOL 0x08 /* Volume label */
-#define AM_LFN 0x0F /* LFN entry */
-#define AM_DIR 0x10 /* Directory */
-#define AM_ARC 0x20 /* Archive */
-#define AM_MASK 0x3F /* Mask of defined bits */
-
-
-/*--------------------------------*/
-/* Multi-byte word access macros */
-
-#if _WORD_ACCESS == 1 /* Enable word access to the FAT structure */
-#define LD_WORD(ptr) (WORD)(*(WORD*)(BYTE*)(ptr))
-#define LD_DWORD(ptr) (DWORD)(*(DWORD*)(BYTE*)(ptr))
-#define ST_WORD(ptr,val) *(WORD*)(BYTE*)(ptr)=(WORD)(val)
-#define ST_DWORD(ptr,val) *(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
-#else /* Use byte-by-byte access to the FAT structure */
-#define LD_WORD(ptr) (WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr))
-#define LD_DWORD(ptr) (DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr))
-#define ST_WORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8)
-#define ST_DWORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24)
-#endif
-
-
-#endif /* _FATFS */
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "ProgrammerConfig.h"
-
-struct
-{
- uint16_t SigBytes[4];
- bool EnforceSigBytes;
-
- uint32_t ProgrammingSpeed;
-} ProgrammerConfig;
-
-bool ProgrammerConfig_ProcessConfiguration(void)
-{
- memset(&ProgrammerConfig, 0x00, sizeof(ProgrammerConfig));
-
- if (!(pf_open("CONF.txt") == FR_OK))
- {
- puts(" >> ERROR: CONF.txt File Not Found.\r\n");
- return false;
- }
-
- char LineBuff[100];
- char* CurrentLine;
-
- do
- {
- CurrentLine = fgets(LineBuff, sizeof(LineBuff), &DiskStream);
-
- if (CurrentLine)
- {
- sscanf(CurrentLine, "SIGNATURE = %02x %02x %02x %02x", &ProgrammerConfig.SigBytes[0],
- &ProgrammerConfig.SigBytes[1],
- &ProgrammerConfig.SigBytes[2],
- &ProgrammerConfig.SigBytes[3]);
-
- sscanf(CurrentLine, "SPEED = %08lu", &ProgrammerConfig.ProgrammingSpeed);
- }
- } while (CurrentLine);
-
- printf(" >> *** Configuration: ***\r\n");
- printf(" >> Device Signature: 0x%02x 0x%02x 0x%02x 0x%02x\r\n", ProgrammerConfig.SigBytes[0],
- ProgrammerConfig.SigBytes[1],
- ProgrammerConfig.SigBytes[2],
- ProgrammerConfig.SigBytes[3]);
- printf(" >> Programming Speed: %lu Hz\r\n", ProgrammerConfig.ProgrammingSpeed);
-
- return true;
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#ifndef _PROGRAMMER_CONFIG_H_
-#define _PROGRAMMER_CONFIG_H_
-
- /* Includes: */
- #include <stdio.h>
- #include <string.h>
- #include <stdbool.h>
-
- #include "../StandaloneProgrammer.h"
-
- /* Function Prototypes: */
- bool ProgrammerConfig_ProcessConfiguration(void);
-
-#endif
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- * which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- * features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
- {
- .DeviceType = DEVICE_TYPE_BLOCK,
- .PeripheralQualifier = 0,
-
- .Removable = true,
-
- .Version = 0,
-
- .ResponseDataFormat = 2,
- .NormACA = false,
- .TrmTsk = false,
- .AERC = false,
-
- .AdditionalLength = 0x1F,
-
- .SoftReset = false,
- .CmdQue = false,
- .Linked = false,
- .Sync = false,
- .WideBus16Bit = false,
- .WideBus32Bit = false,
- .RelAddr = false,
-
- .VendorID = "LUFA",
- .ProductID = "Dataflash Disk",
- .RevisionID = {'0','.','0','0'},
- };
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- * command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
- {
- .ResponseCode = 0x70,
- .AdditionalLength = 0x0A,
- };
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- * a command failure due to a ILLEGAL REQUEST.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- *
- * \return Boolean true if the command completed successfully, false otherwise
- */
-bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- bool CommandSuccess = false;
-
- /* Run the appropriate SCSI command hander function based on the passed command */
- switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
- {
- case SCSI_CMD_INQUIRY:
- CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
- break;
- case SCSI_CMD_REQUEST_SENSE:
- CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
- break;
- case SCSI_CMD_READ_CAPACITY_10:
- CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
- break;
- case SCSI_CMD_SEND_DIAGNOSTIC:
- CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
- break;
- case SCSI_CMD_WRITE_10:
- CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
- break;
- case SCSI_CMD_READ_10:
- CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
- break;
- case SCSI_CMD_MODE_SENSE_6:
- CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
- break;
- case SCSI_CMD_TEST_UNIT_READY:
- case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
- case SCSI_CMD_VERIFY_10:
- /* These commands should just succeed, no handling required */
- CommandSuccess = true;
- MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
- break;
- default:
- /* Update the SENSE key to reflect the invalid command */
- SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
- SCSI_ASENSE_INVALID_COMMAND,
- SCSI_ASENSEQ_NO_QUALIFIER);
- break;
- }
-
- /* Check if command was successfully processed */
- if (CommandSuccess)
- {
- SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
- SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
- SCSI_ASENSEQ_NO_QUALIFIER);
-
- return true;
- }
-
- return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- * and capabilities to the host.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- *
- * \return Boolean true if the command completed successfully, false otherwise.
- */
-static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
- uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData));
-
- /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
- if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
- MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
- {
- /* Optional but unsupported bits set - update the SENSE key and fail the request */
- SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
- SCSI_ASENSE_INVALID_FIELD_IN_CDB,
- SCSI_ASENSEQ_NO_QUALIFIER);
-
- return false;
- }
-
- Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
- /* Pad out remaining bytes with 0x00 */
- Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
- /* Finalize the stream transfer to send the last packet */
- Endpoint_ClearIN();
-
- /* Succeed the command and update the bytes transferred counter */
- MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
- return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- * including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- *
- * \return Boolean true if the command completed successfully, false otherwise.
- */
-static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
- uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
- Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
- Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
- Endpoint_ClearIN();
-
- /* Succeed the command and update the bytes transferred counter */
- MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
- return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- * on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- *
- * \return Boolean true if the command completed successfully, false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1);
- uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE;
-
- Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
- Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
- Endpoint_ClearIN();
-
- /* Succeed the command and update the bytes transferred counter */
- MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
-
- return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- * supported.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- *
- * \return Boolean true if the command completed successfully, false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- /* Check to see if the SELF TEST bit is not set */
- if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
- {
- /* Only self-test supported - update SENSE key and fail the command */
- SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
- SCSI_ASENSE_INVALID_FIELD_IN_CDB,
- SCSI_ASENSEQ_NO_QUALIFIER);
-
- return false;
- }
-
- /* Check to see if all attached Dataflash ICs are functional */
- if (!(DataflashManager_CheckDataflashOperation()))
- {
- /* Update SENSE key with a hardware error condition and return command fail */
- SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
- SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
- SCSI_ASENSEQ_NO_QUALIFIER);
-
- return false;
- }
-
- /* Succeed the command and update the bytes transferred counter */
- MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
- return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- * reading and writing of the data.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- * \return Boolean true if the command completed successfully, false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
- const bool IsDataRead)
-{
- uint32_t BlockAddress;
- uint16_t TotalBlocks;
-
- /* Check if the disk is write protected or not */
- if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
- {
- /* Block address is invalid, update SENSE key and return command fail */
- SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
- SCSI_ASENSE_WRITE_PROTECTED,
- SCSI_ASENSEQ_NO_QUALIFIER);
-
- return false;
- }
-
- /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
- BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
-
- /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
- TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
-
- /* Check if the block address is outside the maximum allowable value for the LUN */
- if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS)
- {
- /* Block address is invalid, update SENSE key and return command fail */
- SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
- SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
- SCSI_ASENSEQ_NO_QUALIFIER);
-
- return false;
- }
-
- /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
- if (IsDataRead == DATA_READ)
- DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
- else
- DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-
- /* Update the bytes transferred counter and succeed the command */
- MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
- return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- * the SCSI device, as well as the device's Write Protect status.
- *
- * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with
- *
- * \return Boolean true if the command completed successfully, false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- /* Send an empty header response with the Write Protect flag status */
- Endpoint_Write_8(0x00);
- Endpoint_Write_8(0x00);
- Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
- Endpoint_Write_8(0x00);
- Endpoint_ClearIN();
-
- /* Update the bytes transferred counter and succeed the command */
- MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
-
- return true;
-}
-#endif
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-
- #include <LUFA/Drivers/USB/USB.h>
-
- #include "../StandaloneProgrammer.h"
- #include "../Descriptors.h"
- #include "DataflashManager.h"
-
- /* Macros: */
- /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
- * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
- * the last command failure) in a quick and easy manner.
- *
- * \param[in] Key New SCSI sense key to set the sense code to
- * \param[in] Acode New SCSI additional sense key to set the additional sense code to
- * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to
- */
- #define SCSI_SET_SENSE(Key, Acode, Aqual) MACROS{ SenseData.SenseKey = (Key); \
- SenseData.AdditionalSenseCode = (Acode); \
- SenseData.AdditionalSenseQualifier = (Aqual); }MACROE
-
- /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
- #define DATA_READ true
-
- /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
- #define DATA_WRITE false
-
- /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
- #define DEVICE_TYPE_BLOCK 0x00
-
- /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
- #define DEVICE_TYPE_CDROM 0x05
-
- /* Function Prototypes: */
- #if defined(USB_CAN_BE_DEVICE)
- bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
- #if defined(INCLUDE_FROM_SCSI_C)
- static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
- static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
- static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
- static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
- static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
- const bool IsDataRead);
- static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
- #endif
- #endif
-
-#endif
-
+++ /dev/null
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-; Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-; Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
-
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
-
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
-
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-
-;------------------------------------------------------------------------------
-; Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID. Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2063&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2063&MI_00
-
-
-;------------------------------------------------------------------------------
-; String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
-MFGNAME="CCS, Inc."
-INSTDISK="LUFA Benito Programmer Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the Standalone Programmer project. This file contains the main tasks of
- * the project and is responsible for the initial application hardware configuration.
- */
-
-#define INCLUDE_FROM_STANDALONEPROG_C
-#include "StandaloneProgrammer.h"
-
-/** Standard file stream for the currently open file on the disk. */
-FILE DiskStream = FDEV_SETUP_STREAM(NULL, Disk_getchar, _FDEV_SETUP_READ);
-
-/** Petite FAT Fs structure to hold the internal state of the FAT driver for the Dataflash contents. */
-FATFS DiskFATState;
-
-/** Stream character fetching routine for the FAT driver so that characters from the currently open file can be
- * read in sequence when applied to a stdio stream.
- */
-static int Disk_getchar(FILE* Stream)
-{
- char ReadByte;
- WORD ByteWasRead;
-
- if (pf_read(&ReadByte, 1, &ByteWasRead) != FR_OK)
- return _FDEV_ERR;
-
- return (ByteWasRead ? ReadByte : _FDEV_EOF);
-}
-
-#if defined(USB_CAN_BE_BOTH)
-/** Event to handle mode changes in the library, to clear the FAT library's drive state structure when transitioning
- * between modes. This ensures that the library always works with current disk data.
- */
-void EVENT_USB_UIDChange(void)
-{
- pf_mount(&DiskFATState);
-}
-#endif
-
-/** Task to determine if the user is wishes to start the programming sequence, and if so executes the
- * required functions to program the attached target (if any) with the files loaded to the Dataflash.
- */
-void Programmer_Task(void)
-{
- static bool HasAttempted = false;
-
- if (Buttons_GetStatus() & BUTTONS_BUTTON1)
- {
- if (!(HasAttempted))
- HasAttempted = true;
- else
- return;
-
- puts("==== PROGRAMMING CYCLE STARTED ====\r\n");
-
- #if defined(USB_CAN_BE_BOTH)
- printf("Using %s Drive...\r\n", (USB_CurrentMode == USB_MODE_Host) ? "External" : "Internal");
- #endif
-
- puts("Reading Configuration File...\r\n");
- if (!(ProgrammerConfig_ProcessConfiguration()))
- goto EndOfProgCycle;
-
- EndOfProgCycle:
- puts("==== PROGRAMMING CYCLE FINISHED ====\r\n");
- }
- else
- {
- HasAttempted = false;
- }
-}
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- * setup of all components and the main program loop.
- */
-int main(void)
-{
- SetupHardware();
-
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- sei();
-
- for (;;)
- {
- Programmer_Task();
-
- #if defined(USB_CAN_BE_HOST)
- if (USB_CurrentMode == USB_MODE_Host)
- DiskHost_USBTask();
- #endif
-
- #if defined(USB_CAN_BE_DEVICE)
- if (USB_CurrentMode == USB_MODE_Device)
- DiskDevice_USBTask();
- #endif
-
- USB_USBTask();
- }
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- #if defined(USB_CAN_BE_BOTH)
- USB_Init(USB_MODE_UID);
- #else
- USB_Init();
- #endif
-
- LEDs_Init();
- SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- Dataflash_Init();
- Buttons_Init();
- Serial_Init(9600, true);
-
- /* Create a stdio stream for the serial port for stdin and stdout */
- Serial_CreateStream(NULL);
-
- #if defined(USB_CAN_BE_DEVICE)
- /* Check if the Dataflash is working, abort if not */
- if (!(DataflashManager_CheckDataflashOperation()))
- {
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- for(;;);
- }
-
- /* Clear Dataflash sector protections, if enabled */
- DataflashManager_ResetDataflashProtections();
- #endif
-}
-
+++ /dev/null
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for StandaloneProgrammer.c.
- */
-
-#ifndef _STANDALONE_PROG_H_
-#define _STANDALONE_PROG_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/wdt.h>
- #include <avr/power.h>
- #include <avr/interrupt.h>
- #include <stdio.h>
-
- #include "DiskDevice.h"
- #include "DiskHost.h"
-
- #include "Lib/SCSI.h"
- #include "Lib/DataflashManager.h"
- #include "Lib/ProgrammerConfig.h"
- #include "Lib/PetiteFATFs/pff.h"
-
- #include <LUFA/Version.h>
- #include <LUFA/Drivers/Board/Buttons.h>
- #include <LUFA/Drivers/Peripheral/Serial.h>
-
- /* Macros: */
- /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
- #define LEDMASK_USB_NOTREADY LEDS_LED1
-
- /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
- #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
- #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
-
- /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
- #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
-
- /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
- #define LEDMASK_USB_BUSY LEDS_LED2
-
- /* External Variables: */
- extern FILE DiskStream;
- extern FATFS DiskFATState;
-
- /* Function Prototypes: */
- #if defined(INCLUDE_FROM_STANDALONEPROG_C)
- static int Disk_getchar(FILE* Stream);
- #endif
-
- void EVENT_USB_UIDChange(void);
-
- void SetupHardware(void);
- void Programmer_Task(void);
-
-#endif
-
+++ /dev/null
-# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = USBKEY
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 8000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = StandaloneProgrammer
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D HOST_STATE_AS_GPIOR=1
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c \
- Descriptors.c \
- DiskHost.c \
- DiskDevice.c \
- Lib/SCSI.c \
- Lib/DataflashManager.c \
- Lib/ProgrammerConfig.c \
- Lib/PetiteFATFs/diskio.c \
- Lib/PetiteFATFs/pff.c \
- $(LUFA_SRC_USB) \
- $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_SERIAL)
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=c99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += $(LUFA_OPTS)
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define MAX_SIMULTANEOUS_NOTES 3
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <avr/pgmspace.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
#define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2)
#include <stdbool.h>
#include "Descriptors.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Drivers/USB/USB.h>
/** Lowest valid MIDI pitch index */
#define BASE_PITCH_INDEX 21
- /** Maximum number of MIDI notes that can be played simultaneously */
- #define MAX_SIMULTANEOUS_NOTES 3
-
/** Number of samples in the virtual sample table (can be expanded to lower maximum frequency, but allow for
* more simultaneous notes due to the reduced amount of processing time needed when the samples are spaced out)
*/
* </tr>
* <tr>
* <td>MAX_SIMULTANEOUS_NOTES</td>
- * <td>MIDIToneGenerator.h</td>
+ * <td>AppConfig.h</td>
* <td>Sets the maximum number of MIDI notes that can be generated simultaneously. More notes require more processing time,
* and thus a value that is too high will cause audiable sound distortion due to insufficient CPU time.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define MAG_T1_CLOCK (1 << 0)
+ #define MAG_T1_DATA (1 << 1)
+ #define MAG_T2_CLOCK (1 << 2)
+ #define MAG_T2_DATA (1 << 3)
+ #define MAG_T3_CLOCK (1 << 4)
+ #define MAG_T3_DATA (1 << 5)
+ #define MAG_CARDPRESENT (1 << 6)
+
+ #define MAG_PORT PORTC
+ #define MAG_PIN PINC
+ #define MAG_DDR DDRC
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Type Defines: */
/** Type define for the device configuration descriptor structure. This must be defined in the
* application code, as the configuration descriptor contains several sub-descriptors which
#include <avr/io.h>
#include <LUFA/Common/Common.h>
+ #include "Config/AppConfig.h"
/* Private Interface - For use in library only: */
/* Macros: */
#include "Descriptors.h"
#include "Lib/MagstripeHW.h"
#include "Lib/CircularBitBuffer.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
/* Macros: */
* </tr>
* <tr>
* <td>MAG_T1_CLOCK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's CLOCK line for the reader's track 1 output.</td>
* </tr>
* <tr>
* <td>MAG_T1_DATA</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's DATA line for the reader's track 1 output.</td>
* </tr>
* <tr>
* <td>MAG_T2_CLOCK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's CLOCK line for the reader's track 2 output.</td>
* </tr>
* <tr>
* <td>MAG_T2_DATA</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's DATA line for the reader's track 2 output.</td>
* </tr>
* <tr>
* <td>MAG_T3_CLOCK</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's CLOCK line for the reader's track 3 output.</td>
* </tr>
* <tr>
* <td>MAG_T3_DATA</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's DATA line for the reader's track 3 output.</td>
* </tr>
* <tr>
* <td>MAG_CARDPRESENT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Mask for the magnetic card reader's card detection output.</td>
* </tr>
* <tr>
* <td>MAG_PIN</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PIN register that the magnetic card reader device is attached to.</td>
* </tr>
* <tr>
* <td>MAG_PORT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>PORT register that the magnetic card reader device is attached to.</td>
* </tr>
* <tr>
* <td>MAG_DDR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>DDR register that the magnetic card reader device is attached to.</td>
* </tr>
* </table>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-LUFA_OPTS += -D MAG_T1_CLOCK="(1 << 0)"
-LUFA_OPTS += -D MAG_T1_DATA="(1 << 1)"
-LUFA_OPTS += -D MAG_T2_CLOCK="(1 << 2)"
-LUFA_OPTS += -D MAG_T2_DATA="(1 << 3)"
-LUFA_OPTS += -D MAG_T3_CLOCK="(1 << 4)"
-LUFA_OPTS += -D MAG_T3_DATA="(1 << 5)"
-LUFA_OPTS += -D MAG_CARDPRESENT="(1 << 6)"
-LUFA_OPTS += -D MAG_PIN=PINB
-LUFA_OPTS += -D MAG_DDR=DDRB
-LUFA_OPTS += -D MAG_PORT=PORTB
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+ #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
+// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
+// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+ #define HOST_STATE_AS_GPIOR 0
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <string.h>
#include <stdio.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Board/Joystick.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D HOST_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+ #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR 0
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR 0
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
#include "Lib/HD44780.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/RingBuffer.h>
#include <LUFA/Drivers/USB/USB.h>
\r
\r
# LUFA library compile-time options and predefined tokens\r
-LUFA_OPTS = -D USB_DEVICE_ONLY\r
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0\r
-LUFA_OPTS += -D ORDERED_EP_CONFIG\r
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS\r
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT\r
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER\r
\r
\r
# Create the LUFA source path variables by including the LUFA root makefile\r
# Each directory must be seperated by a space.\r
# Use forward slashes for directory separators.\r
# For a directory that has spaces, enclose it in quotes.\r
-EXTRAINCDIRS = $(LUFA_PATH)/\r
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/\r
\r
\r
# Compiler flag to set the C Standard level.\r
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+// #define DUMMY_RTC
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR 0
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** HID class report descriptor. This is a special descriptor constructed with values from the
* USBIF HID class specification to describe the reports and capabilities of the HID device. This
#include <LUFA/Drivers/USB/USB.h>
#include "TempDataLogger.h"
+ #include "Config/AppConfig.h"
/* Macros: */
/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
#include <avr/io.h>
#include <LUFA/Drivers/Peripheral/TWI.h>
+
+ #include "Config/AppConfig.h"
/* Type Defines: */
typedef struct
} DS1307_DateTimeRegs_t;
/* Macros: */
+ /** TWI address of the DS1307 device on the bus. */
#define DS1307_ADDRESS 0xD0
/* Function Prototypes: */
#include "Lib/DataflashManager.h"
#include "Lib/FATFs/ff.h"
#include "Lib/DS1307.h"
-
- #include <LUFA/Version.h>
+ #include "Config/AppConfig.h"
+
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Temperature.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
* </tr>
* <tr>
* <td>DUMMY_RTC</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time
* stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-#LUFA_OPTS += -D DUMMY_RTC
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR 0
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include "Descriptors.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Drivers/Misc/RingBuffer.h>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define ENABLE_DHCP_CLIENT
+ #define ENABLE_DHCP_SERVER
+ #define ENABLE_TELNET_SERVER
+ #define MAX_URI_LENGTH 50
+
+ #define DEVICE_IP_ADDRESS (uint8_t[]){ 10, 0, 0, 2}
+ #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0}
+ #define DEVICE_GATEWAY (uint8_t[]){ 10, 0, 0, 1}
+ #define SERVER_MAC_ADDRESS (uint8_t[]){ 1, 0, 1, 0, 1, 0}
+
+ #define UIP_CONF_UDP (defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER))
+ #define UIP_CONF_BROADCAST 1
+ #define UIP_CONF_TCP 1
+ #define UIP_CONF_UDP_CONNS 1
+ #define UIP_CONF_MAX_CONNECTIONS 3
+ #define UIP_CONF_MAX_LISTENPORTS 5
+ #define UIP_CONF_BUFFER_SIZE 1514
+ #define UIP_CONF_LL_802154 0
+ #define UIP_CONF_LL_80211 0
+ #define UIP_CONF_ROUTER 0
+ #define UIP_CONF_ICMP6 0
+ #define UIP_CONF_ICMP_DEST_UNREACH 1
+ #define UIP_URGDATA 0
+ #define UIP_ARCH_CHKSUM 0
+ #define UIP_ARCH_ADD32 0
+ #define UIP_NEIGHBOR_CONF_ADDRTYPE 0
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+// #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+// #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+// #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+ #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 8
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+ #define INTERRUPT_CONTROL_ENDPOINT
+// #define NO_DEVICE_REMOTE_WAKEUP
+// #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+ #define HOST_STATE_AS_GPIOR 0
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
#define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3)
this software.
*/
-#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__)
-
/** \file
*
* DHCP Client Application. When connected to the uIP stack, this will retrieve IP configuration settings from the
#define INCLUDE_FROM_DHCPCLIENTAPP_C
#include "DHCPClientApp.h"
+#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__)
+
/** Initialization function for the DHCP client. */
void DHCPClientApp_Init(void)
{
#include <uip.h>
+ #include "Config/AppConfig.h"
#include "../Webserver.h"
#include "DHCPCommon.h"
this software.
*/
-#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__)
-
/** \file
*
* Common DHCP routines to manage DHCP packet data.
#include "DHCPCommon.h"
+#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__)
+
/** Sets the given DHCP option in the DHCP packet's option list. This automatically moves the
* end of options terminator past the new option in the options list.
*
#include <stdbool.h>
#include <string.h>
+ #include "Config/AppConfig.h"
+
#include <uip.h>
/* Macros: */
this software.
*/
-#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__)
-
/** \file
*
* DHCP Server Application. When connected to the uIP stack, this will send IP configuration settings to a
#define INCLUDE_FROM_DHCPSERVERAPP_C
#include "DHCPServerApp.h"
+#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__)
+
struct uip_conn* BroadcastConnection;
uint8_t LeasedIPs[255 / 8];
#include <uip.h>
+ #include "Config/AppConfig.h"
#include "../Webserver.h"
#include "DHCPCommon.h"
#include <string.h>
#include <LUFA/Version.h>
+
+ #include "Config/AppConfig.h"
#include <uip.h>
#include <ff.h>
this software.
*/
-#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__)
-
/** \file
*
* TELNET Webserver Application. When connected to the uIP stack,
#define INCLUDE_FROM_TELNETSERVERAPP_C
#include "TELNETServerApp.h"
+#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__)
+
/** Welcome message to send to a TELNET client when a connection is first made. */
const char PROGMEM WelcomeHeader[] = "********************************************\r\n"
"* LUFA uIP Webserver (TELNET) *\r\n"
#include <uip.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** TCP listen port for incoming TELNET traffic. */
#define TELNET_SERVER_PORT 23
#include <uip_arp.h>
#include <uip-split.h>
#include <timer.h>
+
+ #include "Config/AppConfig.h"
#include "DHCPClientApp.h"
#include "DHCPServerApp.h"
#include "HTTPServerApp.h"
#include "TELNETServerApp.h"
- /* Macros: */
- /** IP address that the webserver should use once connected to a RNDIS device (when DHCP is disabled). */
- #define DEVICE_IP_ADDRESS (uint8_t[]){10, 0, 0, 2}
-
- /** Netmask that the webserver should once connected to a RNDIS device (when DHCP is disabled). */
- #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0}
-
- /** IP address of the default gateway the webserver should use when routing outside the local subnet
- * (when DHCP is disabled).
- */
- #define DEVICE_GATEWAY (uint8_t[]){10, 0, 0, 1}
-
- /** Ethernet MAC address of the virtual webserver. When in device RNDIS mode, the virtual webserver requires
- * a unique MAC address that it can use when sending packets to the RNDIS adapter, which contains a seperate
- * MAC address as set in the RNDIS class driver configuration structure.
- */
- #define SERVER_MAC_ADDRESS (uint8_t[]){1, 0, 1, 0, 1, 0}
-
/* External Variables: */
extern struct uip_eth_addr MACAddress;
#ifndef __UIPOPT_H__
#define __UIPOPT_H__
+#include "Config/AppConfig.h"
+
#ifndef UIP_LITTLE_ENDIAN
#define UIP_LITTLE_ENDIAN 3412
#endif /* UIP_LITTLE_ENDIAN */
#include <LUFA/Drivers/USB/USB.h>
#include "Webserver.h"
- #include "Lib/uIPManagement.h"
#include "Descriptors.h"
+ #include "Lib/uIPManagement.h"
#include "Lib/SCSI.h"
-
+ #include "Config/AppConfig.h"
+
/* External Variables: */
extern USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device;
#include "Webserver.h"
#include "Lib/uIPManagement.h"
+ #include "Config/AppConfig.h"
/* External Variables: */
extern USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host;
#include <avr/power.h>
#include <avr/interrupt.h>
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Dataflash.h>
#include <LUFA/Drivers/Peripheral/SPI.h>
#include "USBDeviceMode.h"
#include "USBHostMode.h"
+ #include "Config/AppConfig.h"
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
* </tr>
* <tr>
* <td>ENABLE_TELNET_SERVER</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections
* and processes user commands.</td>
* </tr>
* <tr>
* <td>ENABLE_DHCP_CLIENT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td>
* </tr>
* <tr>
* <td>ENABLE_DHCP_SERVER</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client.</td>
* </tr>
* <tr>
* <td>DEVICE_IP_ADDRESS</td>
- * <td>Lib/uIPManagement.h</td>
+ * <td>AppConfig.h</td>
* <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
* </tr>
* <tr>
* <td>DEVICE_NETMASK</td>
- * <td>Lib/uIPManagement.h</td>
+ * <td>AppConfig.h</td>
* <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
* </tr>
* <tr>
* <td>DEVICE_GATEWAY</td>
- * <td>Lib/uIPManagement.h</td>
+ * <td>AppConfig.h</td>
* <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT
* is not defined).</td>
* </tr>
* <tr>
* <td>MAX_URI_LENGTH</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td>
* </tr>
+ * <tr>
+ * <td>SERVER_MAC_ADDRESS</td>
+ * <td>AppConfig.h</td>
+ * <td>MAC address of the server used when sending Ethernet packets onto the bus.</td>
+ * </tr>
* </table>
*/
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-LUFA_OPTS += -D ENABLE_DHCP_CLIENT
-LUFA_OPTS += -D ENABLE_DHCP_SERVER
-LUFA_OPTS += -D ENABLE_TELNET_SERVER
-LUFA_OPTS += -D MAX_URI_LENGTH=50
-
-LUFA_OPTS += -D UIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)"
-LUFA_OPTS += -D UIP_CONF_BROADCAST=1
-LUFA_OPTS += -D UIP_CONF_TCP=1
-LUFA_OPTS += -D UIP_CONF_UDP_CONNS=1
-LUFA_OPTS += -D UIP_CONF_MAX_CONNECTIONS=3
-LUFA_OPTS += -D UIP_CONF_MAX_LISTENPORTS=5
-LUFA_OPTS += -D UIP_CONF_BUFFER_SIZE=1514
-LUFA_OPTS += -D UIP_CONF_LL_802154=0
-LUFA_OPTS += -D UIP_CONF_LL_80211=0
-LUFA_OPTS += -D UIP_CONF_ROUTER=0
-LUFA_OPTS += -D UIP_CONF_ICMP6=0
-LUFA_OPTS += -D UIP_CONF_ICMP_DEST_UNREACH=1
-LUFA_OPTS += -D UIP_URGDATA=0
-LUFA_OPTS += -D UIP_ARCH_CHKSUM=0
-LUFA_OPTS += -D UIP_ARCH_ADD32=0
-LUFA_OPTS += -D UIP_NEIGHBOR_CONF_ADDRTYPE=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
# Compiler flag to set the C Standard level.
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Application Configuration Header File
+ *
+ * This is a header file which is be used to configure some of
+ * the application's compile time options, as an alternative to
+ * specifying the compile time constants supplied through a
+ * makefile or build system.
+ *
+ * For information on what each token does, refer to the
+ * \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+ #define AUX_LINE_PORT PORTB
+ #define AUX_LINE_PIN PINB
+ #define AUX_LINE_DDR DDRB
+ #define AUX_LINE_MASK (1 << 4)
+
+// #define ENABLE_ISP_PROTOCOL
+ #define ENABLE_XPROG_PROTOCOL
+
+ #define VTARGET_ADC_CHANNEL 2
+ #define VTARGET_REF_VOLTS 3.3
+ #define VTARGET_SCALE_FACTOR 2
+// #define VTARGET_USE_INTERNAL_REF
+// #define NO_VTARGET_DETECT
+// #define XCK_RESCUE_CLOCK_ENABLE
+// #define INVERTED_ISP_MISO
+
+// #define LIBUSB_DRIVER_COMPAT
+// #define RESET_TOGGLES_LIBUSB_COMPAT
+// #define FIRMWARE_VERSION_MINOR 0x11
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LUFA Library Configuration Header File
+ *
+ * This header file is used to configure LUFA's compile time options,
+ * as an alternative to the compile time constants supplied through
+ * a makefile.
+ *
+ * For information on what each token does, refer to the LUFA
+ * manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+ #if (ARCH == ARCH_AVR8)
+
+ /* Non-USB Related Configuration Tokens: */
+// #define DISABLE_TERMINAL_CODES
+
+ /* USB Class Driver Related Tokens: */
+// #define HID_HOST_BOOT_PROTOCOL_ONLY
+// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
+// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
+// #define HID_MAX_COLLECTIONS {Insert Value Here}
+// #define HID_MAX_REPORTITEMS {Insert Value Here}
+// #define HID_MAX_REPORT_IDS {Insert Value Here}
+// #define NO_CLASS_DRIVER_AUTOFLUSH
+
+ /* General USB Driver Related Tokens: */
+ #define ORDERED_EP_CONFIG
+ #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+ #define USB_DEVICE_ONLY
+// #define USB_HOST_ONLY
+// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
+// #define NO_LIMITED_CONTROLLER_CONNECT
+ #define NO_SOF_EVENTS
+
+ /* USB Device Mode Driver Related Tokens: */
+// #define USE_RAM_DESCRIPTORS
+// #define USE_FLASH_DESCRIPTORS
+// #define USE_EEPROM_DESCRIPTORS
+// #define NO_INTERNAL_SERIAL
+ #define FIXED_CONTROL_ENDPOINT_SIZE 16
+ #define DEVICE_STATE_AS_GPIOR 0
+ #define FIXED_NUM_CONFIGURATIONS 1
+// #define CONTROL_ONLY_DEVICE
+// #define INTERRUPT_CONTROL_ENDPOINT
+ #define NO_DEVICE_REMOTE_WAKEUP
+ #define NO_DEVICE_SELF_POWER
+
+ /* USB Host Mode Driver Related Tokens: */
+// #define HOST_STATE_AS_GPIOR {Insert Value Here}
+// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
+// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
+// #define NO_AUTO_VBUS_MANAGEMENT
+// #define INVERTED_VBUS_ENABLE_LINE
+
+ #else
+
+ #error Unsupported architecture for this LUFA configuration file.
+
+ #endif
+#endif
#include <stdbool.h>
#include "../XPLAINBridge.h"
-
+ #include "Config/AppConfig.h"
+
/* Macros: */
#define SRX PD0
#define SRXPIN PIND
#include "USARTDescriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* device characteristics, including the supported USB version, control endpoint size and the
#include <LUFA/Drivers/USB/USB.h>
+ #include "Config/AppConfig.h"
+
/* Macros: */
/** Endpoint address of the CDC device-to-host notification IN endpoint. */
#define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2)
#include "AVRISPDescriptors.h"
#include "Lib/V2Protocol.h"
#include "Lib/SoftUART.h"
+ #include "Config/AppConfig.h"
- #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Misc/RingBuffer.h>
#include <LUFA/Drivers/USB/USB.h>
* </tr>
* <tr>
* <td>LIBUSB_DRIVER_COMPAT</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
* the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
*
* </tr>
* <tr>
* <td>FIRMWARE_VERSION_MINOR</td>
- * <td>Makefile LUFA_OPTS</td>
+ * <td>AppConfig.h</td>
* <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
* with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
* </tr>
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-
-LUFA_OPTS += -D AUX_LINE_PORT=PORTB
-LUFA_OPTS += -D AUX_LINE_PIN=PINB
-LUFA_OPTS += -D AUX_LINE_DDR=DDRB
-LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
-LUFA_OPTS += -D VTARGET_REF_VOLTS=3.3
-LUFA_OPTS += -D VTARGET_SCALE_FACTOR=2
-#LUFA_OPTS += -D RESET_TOGGLES_LIBUSB_COMPAT
-#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
-#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
+
# Create the LUFA source path variables by including the LUFA root makefile
include $(LUFA_PATH)/LUFA/makefile
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ Config/
# Compiler flag to set the C Standard level.
projects / pub / USBasp.git / commitdiff