Don't enforce silent output on submake - pass down the value set by the user implicit...

diff --git a/Bootloaders/makefile b/Bootloaders/makefile
index bffee42..01aa506 100644 (file)
--- a/Bootloaders/makefile
+++ b/Bootloaders/makefile
@@ -24,8 +24,8 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)

diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile
index 3bbfaec..f039a3a 100644 (file)
--- a/BuildTests/BoardDriverTest/makefile
+++ b/BuildTests/BoardDriverTest/makefile
@@ -45,7 +45,7 @@ testboards:
             echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu";            \
                                                                                                            \
                 printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile;           \
             echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu";            \
                                                                                                            \
                 printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile;           \

-                printf "\t$(MAKE) -s -f makefile.test clean elf MCU=%s ARCH=%s BOARD=%s\n\n" $$build_mcu $$build_arch $$build_board >> BuildMakefile; \
+                printf "\t$(MAKE) -f makefile.test clean elf MCU=%s ARCH=%s BOARD=%s\n\n" $$build_mcu $$build_arch $$build_board >> BuildMakefile; \

           fi;                                                                                          \
         done < BoardList.txt
         
           fi;                                                                                          \
         done < BoardList.txt
         


@@ -54,9 +54,9 @@ testboards:
 clean:
        rm -f BuildMakefile
        rm -f BoardList.txt
 clean:
        rm -f BuildMakefile
        rm -f BoardList.txt

-       $(MAKE) -s -f makefile.test clean BOARD=NONE ARCH=AVR8 MCU=at90usb1287
-       $(MAKE) -s -f makefile.test clean BOARD=NONE ARCH=XMEGA MCU=atxmega128a1u
-       $(MAKE) -s -f makefile.test clean BOARD=NONE ARCH=UC3 MCU=uc3a0256
+       $(MAKE) -f makefile.test clean BOARD=NONE ARCH=AVR8 MCU=at90usb1287
+       $(MAKE) -f makefile.test clean BOARD=NONE ARCH=XMEGA MCU=atxmega128a1u
+       $(MAKE) -f makefile.test clean BOARD=NONE ARCH=UC3 MCU=uc3a0256

 
 %:
 
 
 %:
 

diff --git a/BuildTests/BootloaderTest/makefile b/BuildTests/BootloaderTest/makefile
index e894e6f..d15a85e 100644 (file)
--- a/BuildTests/BootloaderTest/makefile
+++ b/BuildTests/BootloaderTest/makefile
@@ -44,7 +44,7 @@ testbootloaders:
             printf "Found '%s' bootloader configuration (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \
                                                                  \
             printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \
             printf "Found '%s' bootloader configuration (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \
                                                                  \
             printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \

-            printf "\t$(MAKE) -s -C $(patsubst %/,%,$(LUFA_PATH))/../Bootloaders/%s/ clean elf ARCH=%s MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s\n\n" $$build_bootloader $$build_arch $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \
+            printf "\t$(MAKE) -C $(patsubst %/,%,$(LUFA_PATH))/../Bootloaders/%s/ clean elf ARCH=%s MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s\n\n" $$build_bootloader $$build_arch $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \

           fi;                                                    \
         done < BootloaderDeviceMap.cfg
         
           fi;                                                    \
         done < BootloaderDeviceMap.cfg
         

diff --git a/BuildTests/ModuleTest/makefile b/BuildTests/ModuleTest/makefile
index 1d243dd..196fc32 100644 (file)
--- a/BuildTests/ModuleTest/makefile
+++ b/BuildTests/ModuleTest/makefile
@@ -40,20 +40,20 @@ end:
 
 %.avr8:
        @echo Building ModuleTest for ARCH=AVR8 MCU=$(@:%.avr8=%)...
 
 %.avr8:
        @echo Building ModuleTest for ARCH=AVR8 MCU=$(@:%.avr8=%)...

-       $(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=$(@:%.avr8=%)
+       $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=$(@:%.avr8=%)

 
 %.xmega:
        @echo Building ModuleTest for ARCH=XMEGA MCU=$(@:%.xmega=%)...
 
 %.xmega:
        @echo Building ModuleTest for ARCH=XMEGA MCU=$(@:%.xmega=%)...

-       $(MAKE) -s -f makefile.test clean elf ARCH=XMEGA MCU=$(@:%.xmega=%)
+       $(MAKE) -f makefile.test clean elf ARCH=XMEGA MCU=$(@:%.xmega=%)

 
 %.uc3:
        @echo Building ModuleTest for ARCH=UC3 MCU=$(@:%.uc3=%)...
 
 %.uc3:
        @echo Building ModuleTest for ARCH=UC3 MCU=$(@:%.uc3=%)...

-       $(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%)
+       $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%)

 
 clean:
 
 clean:

-       $(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES))
-       $(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES))
-       $(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES))
+       $(MAKE) -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES))
+       $(MAKE) -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES))
+       $(MAKE) -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES))

 
 %:
 
 
 %:
 

diff --git a/BuildTests/SingleUSBModeTest/makefile b/BuildTests/SingleUSBModeTest/makefile
index 1466747..7b5b060 100644 (file)
--- a/BuildTests/SingleUSBModeTest/makefile
+++ b/BuildTests/SingleUSBModeTest/makefile
@@ -26,24 +26,24 @@ end:
 
 compile:
        @echo Building SingleUSBModeTest for ARCH=AVR8 in device only mode...
 
 compile:
        @echo Building SingleUSBModeTest for ARCH=AVR8 in device only mode...

-       $(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_DEVICE_ONLY'
+       $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_DEVICE_ONLY'

 
        @echo Building SingleUSBModeTest for ARCH=AVR8 in host only mode...
 
        @echo Building SingleUSBModeTest for ARCH=AVR8 in host only mode...

-       $(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_HOST_ONLY'
+       $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_HOST_ONLY'

 
        @echo Building SingleUSBModeTest for ARCH=XMEGA in device only mode...
 
        @echo Building SingleUSBModeTest for ARCH=XMEGA in device only mode...

-       $(MAKE) -s -f makefile.test clean elf ARCH=XMEGA MCU=atxmega128a1u CC_FLAGS='-D USB_DEVICE_ONLY'
+       $(MAKE) -f makefile.test clean elf ARCH=XMEGA MCU=atxmega128a1u CC_FLAGS='-D USB_DEVICE_ONLY'

        
        @echo Building SingleUSBModeTest for ARCH=UC3 in device only mode...
        
        @echo Building SingleUSBModeTest for ARCH=UC3 in device only mode...

-       $(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_DEVICE_ONLY'
+       $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_DEVICE_ONLY'

 
        @echo Building SingleUSBModeTest for ARCH=UC3 in host only mode...
 
        @echo Building SingleUSBModeTest for ARCH=UC3 in host only mode...

-       $(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_HOST_ONLY'
+       $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_HOST_ONLY'

 
 clean:
 
 clean:

-       $(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287
-       $(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u
-       $(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256
+       $(MAKE) -f makefile.test clean ARCH=AVR8 MCU=at90usb1287
+       $(MAKE) -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u
+       $(MAKE) -f makefile.test clean ARCH=UC3 MCU=uc3a0256

 
 %:
 
 
 %:
 

diff --git a/Demos/Device/ClassDriver/makefile b/Demos/Device/ClassDriver/makefile
index 0e1dfae..ad88000 100644 (file)
--- a/Demos/Device/ClassDriver/makefile
+++ b/Demos/Device/ClassDriver/makefile
@@ -24,8 +24,8 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)

diff --git a/Demos/Device/LowLevel/makefile b/Demos/Device/LowLevel/makefile
index 0e1dfae..ad88000 100644 (file)
--- a/Demos/Device/LowLevel/makefile
+++ b/Demos/Device/LowLevel/makefile
@@ -24,8 +24,8 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)

diff --git a/Demos/DualRole/ClassDriver/makefile b/Demos/DualRole/ClassDriver/makefile
index dc41c9b..741383f 100644 (file)
--- a/Demos/DualRole/ClassDriver/makefile
+++ b/Demos/DualRole/ClassDriver/makefile
@@ -24,9 +24,9 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)

 
 

diff --git a/Demos/Host/ClassDriver/makefile b/Demos/Host/ClassDriver/makefile
index 128a22f..d9a3dc3 100644 (file)
--- a/Demos/Host/ClassDriver/makefile
+++ b/Demos/Host/ClassDriver/makefile
@@ -24,8 +24,8 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)

diff --git a/Demos/Host/LowLevel/makefile b/Demos/Host/LowLevel/makefile
index 128a22f..d9a3dc3 100644 (file)
--- a/Demos/Host/LowLevel/makefile
+++ b/Demos/Host/LowLevel/makefile
@@ -24,8 +24,8 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)

diff --git a/Projects/makefile b/Projects/makefile
index e169689..2bc9f98 100644 (file)
--- a/Projects/makefile
+++ b/Projects/makefile
@@ -24,8 +24,8 @@ endif
 
 all:
 ifeq ($(OBJDIR),)
 
 all:
 ifeq ($(OBJDIR),)

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) clean all;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) clean all;)

 endif
 
 %:
 endif
 
 %:

-       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -s -C $(PROJECT) $@;)
+       @$(foreach PROJECT, $(PROJECT_DIRECTORIES), $(MAKE) -C $(PROJECT) $@;)