/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects
*
- * If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed
+ * If the target AVR model, clock speed, board or other settings are different from the current settings, they must be changed
* and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project
* configuration options are located in the "makefile" build script inside each LUFA application's folder, however some
- * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the
- * main .c source file of the project. See each project's individual documentation for application-specific configuration
+ * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in one or
+ * more of the source files of the project. See each project's individual documentation for application-specific configuration
* values.
*
* Each project "makefile" contains all the script and configuration data required to compile each project. When opened with
* Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For
* each application, the important variables which should be altered are:
*
- * - <b>MCU</b>, the target AVR processor.
+ * - <b>MCU</b>, the target AVR processor
* - <b>BOARD</b>, the target board hardware
* - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed
* - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling
* (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the
* USB AVR models, as they may make use of peripherals or modes only present in some devices.
*
- * For supported library AVR models, see main documentation page.
+ * For supported processor models, see \ref Page_DeviceSupport.
*
* \section Sec_BOARD The BOARD Parameter
* This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific,
* directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the
* custom board's hardware.
*
+ * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport.
+ *
* \section Sec_F_CLOCK The F_CLOCK Parameter
* This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the
* USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the
* - Linux Secure Storage Dongle: http://github.com/TomMD/teensy
* - MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g
* - MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster
+ * - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
* - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm
* - Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/
* - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/
* - Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR
* - Many of Busware's Products: http://www.busware.de/
* - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/
- * - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
* - Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org
* - USBTINY-MKII, an AVRISP-MKII Clone AVR Programmer: http://tom-itx.dyndns.org:81/~webpage/boards/USBTiny_Mkii/USBTiny_Mkii_index.php
* - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/
# Check to see if the LUFA_PATH variable has not been set (the makefile is not being included from a project makefile)
ifeq ($(origin LUFA_PATH), undefined)
- LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_TEMPERATURE) $(LUFA_SRC_SERIAL) \
- $(LUFA_SRC_SERIALSTREAM) $(LUFA_SRC_TWI) \
- $(LUFA_SRC_SCHEDULER)
+ LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) \
+ $(LUFA_SRC_TEMPERATURE) $(LUFA_SRC_SERIAL) \
+ $(LUFA_SRC_SERIALSTREAM) $(LUFA_SRC_TWI) \
+ $(LUFA_SRC_SCHEDULER)
all:
projects / pub / USBasp.git / commitdiff