* the HID.h file documentation.\r
*\r
*\r
- * \section Sec_SummaryUSBTokens USB Driver Related Tokens\r
+ * \section Sec_SummaryUSBTokens General USB Driver Related Tokens\r
* This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.\r
*\r
+ * <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n\r
+ * Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the\r
+ * host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/\r
+ * pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,\r
+ * allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed\r
+ * by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as\r
+ * a parameter.\r
+ *\r
+ * <b>FAST_STREAM_TRANSFERS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n\r
+ * By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full\r
+ * or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However,\r
+ * this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is\r
+ * used, bytes are sent or recevied in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption\r
+ * due to the extra code required to deal with byte alignment.\r
+ *\r
+ * <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n\r
+ * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad\r
+ * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options\r
+ * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing\r
+ * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an\r
+ * Options parameter.\r
+ *\r
+ * <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n\r
+ * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the\r
+ * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to\r
+ * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which\r
+ * do not support host mode.\r
+ *\r
+ * <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n\r
+ * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.\r
+ *\r
+ * <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n\r
+ * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host\r
+ * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout\r
+ * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.\r
+ *\r
+ * <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n\r
+ * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of\r
+ * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be\r
+ * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is\r
+ * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global\r
+ * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.\r
+ * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.\r
+ *\r
+ *\r
+ * \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens\r
+ * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode.\r
+ *\r
* <b>USE_RAM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n\r
* Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one\r
* of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime.\r
* reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except\r
* implicitly via the library APIs.\r
*\r
- * <b>HOST_STATE_AS_GPIOR</b> - ( \ref Group_Host ) \n\r
- * One of the most frequenty used global variables in the stack is the USB_HostState global, which indicates the current state of\r
- * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token\r
- * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR\r
- * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except\r
- * implicitly via the library APIs.\r
- *\r
* <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - ( \ref Group_Device ) \n\r
* By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces\r
* the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in\r
* is through control endpoint requests. Defining this token will remove several features related to the selection and control of device\r
* endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided.\r
*\r
- * <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n\r
- * Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the\r
- * host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/\r
- * pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,\r
- * allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed\r
- * by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as\r
- * a parameter.\r
+ * <b>INTERRUPT_CONTROL_ENDPOINT</b> - ( \ref Group_USBManagement ) \n\r
+ * Some applications prefer to not call the USB_USBTask() management task reguarly while in device mode, as it can complicate code significantly.\r
+ * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control\r
+ * endpoint entirely via USB controller interrupts asynchronously to the user application.\r
*\r
- * <b>FAST_STREAM_TRANSFERS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n\r
- * By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full\r
- * or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However,\r
- * this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is\r
- * used, bytes are sent or recevied in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption\r
- * due to the extra code required to deal with byte alignment.\r
+ * <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device ) \n\r
+ * Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices,\r
+ * the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch.\r
+ *\r
+ * <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device ) \n\r
+ * USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may\r
+ * query the device to determine the current power source, via \ref USB_CurrentlySelfPowered. For solely bus powered devices, this global and the\r
+ * code required to manage it may be disabled by passing this token to the library via the -D switch.\r
+ *\r
+ *\r
+ * \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens\r
+ *\r
+ * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode.\r
+ *\r
+ * <b>HOST_STATE_AS_GPIOR</b> - ( \ref Group_Host ) \n\r
+ * One of the most frequenty used global variables in the stack is the USB_HostState global, which indicates the current state of\r
+ * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token\r
+ * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR\r
+ * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except\r
+ * implicitly via the library APIs.\r
*\r
* <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_Host ) \n\r
* When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached\r
* they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled\r
* back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device\r
* settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.\r
- *\r
- * <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n\r
- * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad\r
- * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options\r
- * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing\r
- * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an\r
- * Options parameter.\r
- *\r
- * <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n\r
- * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the\r
- * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to\r
- * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which\r
- * do not support host mode.\r
- *\r
- * <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n\r
- * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.\r
- *\r
- * <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n\r
- * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host\r
- * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout\r
- * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.\r
- *\r
- * <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n\r
- * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of\r
- * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be\r
- * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is\r
- * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global\r
- * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.\r
- * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.\r
- *\r
- * <b>INTERRUPT_CONTROL_ENDPOINT</b> - ( \ref Group_USBManagement ) \n\r
- * Some applications prefer to not call the USB_USBTask() management task reguarly while in device mode, as it can complicate code significantly.\r
- * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control\r
- * endpoint entirely via USB controller interrupts asynchronously to the user application.\r
*/\r
projects / pub / USBasp.git / commitdiff