State information for class drivers is now zeroed out during enumeration (both in...

diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c
index af0f6d2..7b7ca2c 100644 (file)
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c
@@ -49,11 +49,6 @@ USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface =
                                .DataINEndpointNumber     = AUDIO_STREAM_EPNUM,\r
                                .DataINEndpointSize       = AUDIO_STREAM_EPSIZE,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
index f859c7c..129fca5 100644 (file)
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
@@ -49,11 +49,6 @@ USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface =
                                .DataINEndpointNumber     = AUDIO_STREAM_EPNUM,\r
                                .DataINEndpointSize       = AUDIO_STREAM_EPSIZE,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/CDC/CDC.c b/Demos/Device/ClassDriver/CDC/CDC.c
index 95e1a69..3e83ec2 100644 (file)
--- a/Demos/Device/ClassDriver/CDC/CDC.c
+++ b/Demos/Device/ClassDriver/CDC/CDC.c
@@ -55,11 +55,6 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
                                .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,\r
                                .NotificationEndpointSize   = CDC_NOTIFICATION_EPSIZE,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/DualCDC/DualCDC.c b/Demos/Device/ClassDriver/DualCDC/DualCDC.c
index adc17ae..0de83e1 100644 (file)
--- a/Demos/Device/ClassDriver/DualCDC/DualCDC.c
+++ b/Demos/Device/ClassDriver/DualCDC/DualCDC.c
@@ -56,11 +56,6 @@ USB_ClassInfo_CDC_Device_t VirtualSerial1_CDC_Interface =
                                .NotificationEndpointNumber = CDC1_NOTIFICATION_EPNUM,\r
                                .NotificationEndpointSize   = CDC_NOTIFICATION_EPSIZE,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** LUFA CDC Class driver interface configuration and state information. This structure is\r

diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/Demos/Device/ClassDriver/GenericHID/GenericHID.c
index 3f9c402..72063b6 100644 (file)
--- a/Demos/Device/ClassDriver/GenericHID/GenericHID.c
+++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.c
@@ -51,11 +51,6 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface =
                                \r
                                .ReportINBufferSize      = GENERIC_REPORT_SIZE,\r
                        },\r
-\r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.c b/Demos/Device/ClassDriver/Joystick/Joystick.c
index 1e13e99..9a1080c 100644 (file)
--- a/Demos/Device/ClassDriver/Joystick/Joystick.c
+++ b/Demos/Device/ClassDriver/Joystick/Joystick.c
@@ -51,11 +51,6 @@ USB_ClassInfo_HID_Device_t Joystick_HID_Interface =
                                \r
                                .ReportINBufferSize      = sizeof(USB_JoystickReport_Data_t),\r
                        },\r
-       \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/Demos/Device/ClassDriver/Keyboard/Keyboard.c
index af56a22..ba0d239 100644 (file)
--- a/Demos/Device/ClassDriver/Keyboard/Keyboard.c
+++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.c
@@ -52,11 +52,6 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
 \r
                                .ReportINBufferSize      = sizeof(USB_KeyboardReport_Data_t),\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               .IdleCount               = 500,\r
-                       }\r
     };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
index 5c33eeb..241553c 100644 (file)
--- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
+++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
@@ -53,11 +53,6 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
                                \r
                                .ReportINBufferSize      = sizeof(USB_KeyboardReport_Data_t),\r
                        },\r
-\r
-               .State =\r
-                       {\r
-                               .IdleCount               = 500,\r
-                       }\r
        };\r
        \r
 /** LUFA HID Class driver interface configuration and state information. This structure is\r

diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.c b/Demos/Device/ClassDriver/MIDI/MIDI.c
index a6c31ee..243ae9e 100644 (file)
--- a/Demos/Device/ClassDriver/MIDI/MIDI.c
+++ b/Demos/Device/ClassDriver/MIDI/MIDI.c
@@ -52,11 +52,6 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
                                .DataOUTEndpointNumber    = MIDI_STREAM_OUT_EPNUM,\r
                                .DataOUTEndpointSize      = MIDI_STREAM_EPSIZE,\r
                        },\r
-                       \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults                     \r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/Demos/Device/ClassDriver/MassStorage/MassStorage.c
index 0a6604c..6a4612e 100644 (file)
--- a/Demos/Device/ClassDriver/MassStorage/MassStorage.c
+++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.c
@@ -54,11 +54,6 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface =
 \r
                                .TotalLUNs              = TOTAL_LUNS,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.c b/Demos/Device/ClassDriver/Mouse/Mouse.c
index 45d14a3..4bb1fa1 100644 (file)
--- a/Demos/Device/ClassDriver/Mouse/Mouse.c
+++ b/Demos/Device/ClassDriver/Mouse/Mouse.c
@@ -51,11 +51,6 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
 \r
                                .ReportINBufferSize      = sizeof(USB_MouseReport_Data_t),\r
                        },\r
-                       \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }                       \r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
index ed07184..81d31c9 100644 (file)
--- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
+++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
@@ -58,11 +58,6 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface =
                                .AdapterVendorDescription   = "LUFA RNDIS Demo Adapter",\r
                                .AdapterMACAddress          = {ADAPTER_MAC_ADDRESS},\r
                        },\r
-                       \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults                     \r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Device/ClassDriver/USBtoSerial/USBtoSerial.c b/Demos/Device/ClassDriver/USBtoSerial/USBtoSerial.c
index 637071a..e51963c 100644 (file)
--- a/Demos/Device/ClassDriver/USBtoSerial/USBtoSerial.c
+++ b/Demos/Device/ClassDriver/USBtoSerial/USBtoSerial.c
@@ -61,11 +61,6 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
                                .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,\r
                                .NotificationEndpointSize   = CDC_NOTIFICATION_EPSIZE,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Demos/Host/ClassDriver/CDCHost/CDCHost.c b/Demos/Host/ClassDriver/CDCHost/CDCHost.c
index 291e835..0cbb771 100644 (file)
--- a/Demos/Host/ClassDriver/CDCHost/CDCHost.c
+++ b/Demos/Host/ClassDriver/CDCHost/CDCHost.c
@@ -48,11 +48,6 @@ USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface =
                                .DataOUTPipeNumber      = 2,\r
                                .NotificationPipeNumber = 3,\r
                        },\r
-                       \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults                     \r
-                       }\r
        };\r
 \r
        \r

diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.c b/Demos/Host/ClassDriver/MouseHost/MouseHost.c
index 6913ec3..61d7d7b 100644 (file)
--- a/Demos/Host/ClassDriver/MouseHost/MouseHost.c
+++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.c
@@ -50,11 +50,6 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface =
                                .MatchInterfaceProtocol = true,\r
                                .HIDInterfaceProtocol   = 0x02,\r
                        },\r
-                       \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults                     \r
-                       }\r
        };\r
 \r
        \r

diff --git a/LUFA/Drivers/USB/Class/Device/Audio.c b/LUFA/Drivers/USB/Class/Device/Audio.c
index 116921e..b018d66 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/Audio.c
+++ b/LUFA/Drivers/USB/Class/Device/Audio.c
@@ -59,6 +59,8 @@ void Audio_Device_ProcessControlPacket(USB_ClassInfo_Audio_Device_t* const Audio
 \r
 bool Audio_Device_ConfigureEndpoints(USB_ClassInfo_Audio_Device_t* AudioInterfaceInfo)\r
 {\r
+       memset(&AudioInterfaceInfo->State, 0x00, sizeof(AudioInterfaceInfo->State));\r
+\r
        if (AudioInterfaceInfo->Config.DataINEndpointNumber)\r
        {\r
                if (!(Endpoint_ConfigureEndpoint(AudioInterfaceInfo->Config.DataINEndpointNumber, EP_TYPE_ISOCHRONOUS,\r
@@ -78,7 +80,7 @@ bool Audio_Device_ConfigureEndpoints(USB_ClassInfo_Audio_Device_t* AudioInterfac
                        return false;\r
                }\r
        }\r
-\r
+       \r
        return true;\r
 }\r
 \r

diff --git a/LUFA/Drivers/USB/Class/Device/Audio.h b/LUFA/Drivers/USB/Class/Device/Audio.h
index 767f754..eef7f90 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/Audio.h
+++ b/LUFA/Drivers/USB/Class/Device/Audio.h
@@ -91,8 +91,7 @@
                                                                                                *   of the Audio Streaming interface.\r
                                                                                                */\r
                                } State; /**< State data for the USB class interface within the device. All elements in this section\r
-                                         *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
-                                         *   the interface is enumerated.\r
+                                         *   are reset to their defaults when the interface is enumerated.\r
                                          */                            \r
                        } USB_ClassInfo_Audio_Device_t;\r
                \r

diff --git a/LUFA/Drivers/USB/Class/Device/CDC.c b/LUFA/Drivers/USB/Class/Device/CDC.c
index 237e1dd..0359afe 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/CDC.c
+++ b/LUFA/Drivers/USB/Class/Device/CDC.c
@@ -87,6 +87,8 @@ void CDC_Device_ProcessControlPacket(USB_ClassInfo_CDC_Device_t* CDCInterfaceInf
 \r
 bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo)\r
 {\r
+       memset(&CDCInterfaceInfo->State, 0x00, sizeof(CDCInterfaceInfo->State));\r
+\r
        if (!(Endpoint_ConfigureEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber, EP_TYPE_BULK,\r
                                                                 ENDPOINT_DIR_IN, CDCInterfaceInfo->Config.DataINEndpointSize,\r
                                                                 ENDPOINT_BANK_SINGLE)))\r

diff --git a/LUFA/Drivers/USB/Class/Device/CDC.h b/LUFA/Drivers/USB/Class/Device/CDC.h
index 17e9b35..2a8f1ec 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/CDC.h
+++ b/LUFA/Drivers/USB/Class/Device/CDC.h
@@ -102,8 +102,7 @@
                                                uint8_t  DataBits; /**< Bits of data per character of the virtual serial port */\r
                                        } LineEncoding;                 \r
                                } State; /**< State data for the USB class interface within the device. All elements in this section\r
-                                         *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
-                                         *   the interface is enumerated.\r
+                                         *   are reset to their defaults when the interface is enumerated.\r
                                          */\r
                        } USB_ClassInfo_CDC_Device_t;\r
                \r

diff --git a/LUFA/Drivers/USB/Class/Device/HID.c b/LUFA/Drivers/USB/Class/Device/HID.c
index f292c63..43f11ee 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/HID.c
+++ b/LUFA/Drivers/USB/Class/Device/HID.c
@@ -135,6 +135,8 @@ void HID_Device_ProcessControlPacket(USB_ClassInfo_HID_Device_t* const HIDInterf
 \r
 bool HID_Device_ConfigureEndpoints(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo)\r
 {\r
+       memset(&HIDInterfaceInfo->State, 0x00, sizeof(HIDInterfaceInfo->State));\r
+       HIDInterfaceInfo->State.IdleCount = 500;\r
        HIDInterfaceInfo->State.UsingReportProtocol = true;\r
 \r
        if (!(Endpoint_ConfigureEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber, EP_TYPE_INTERRUPT,\r

diff --git a/LUFA/Drivers/USB/Class/Device/HID.h b/LUFA/Drivers/USB/Class/Device/HID.h
index e4a919d..87f96c6 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/HID.h
+++ b/LUFA/Drivers/USB/Class/Device/HID.h
@@ -83,8 +83,7 @@
                                        uint16_t IdleMSRemaining; /**< Total number of ms remaining before the idle period elapsed - this should be\r
                                                                                           *   decremented by the user application if non-zero each millisecond */                      \r
                                } State; /**< State data for the USB class interface within the device. All elements in this section\r
-                                         *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
-                                         *   the interface is enumerated.\r
+                                         *   are reset to their defaults when the interface is enumerated.\r
                                          */\r
                        } USB_ClassInfo_HID_Device_t;\r
        \r

diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.c b/LUFA/Drivers/USB/Class/Device/MIDI.c
index 3643275..ed3aaa7 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/MIDI.c
+++ b/LUFA/Drivers/USB/Class/Device/MIDI.c
@@ -40,6 +40,8 @@ void MIDI_Device_ProcessControlPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInt
 \r
 bool MIDI_Device_ConfigureEndpoints(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo)\r
 {\r
+       memset(&MIDIInterfaceInfo->State, 0x00, sizeof(MIDIInterfaceInfo->State));\r
+\r
        if (MIDIInterfaceInfo->Config.DataINEndpointNumber)\r
        {\r
                if (!(Endpoint_ConfigureEndpoint(MIDIInterfaceInfo->Config.DataINEndpointNumber, EP_TYPE_BULK,\r

diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h
index 66330a1..980ddc5 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Device/MIDI.h
@@ -80,8 +80,7 @@
                                {\r
                                        // No state information for this class yet\r
                                } State; /**< State data for the USB class interface within the device. All elements in this section\r
-                                         *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
-                                         *   the interface is enumerated.\r
+                                         *   are reset to their defaults when the interface is enumerated.\r
                                          */\r
                        } USB_ClassInfo_MIDI_Device_t;  \r
        \r

diff --git a/LUFA/Drivers/USB/Class/Device/MassStorage.c b/LUFA/Drivers/USB/Class/Device/MassStorage.c
index 9f8688c..6160641 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/MassStorage.c
+++ b/LUFA/Drivers/USB/Class/Device/MassStorage.c
@@ -74,6 +74,8 @@ void MS_Device_ProcessControlPacket(USB_ClassInfo_MS_Device_t* const MSInterface
 \r
 bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)\r
 {\r
+       memset(&MSInterfaceInfo->State, 0x00, sizeof(MSInterfaceInfo->State));\r
+\r
        if (!(Endpoint_ConfigureEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber, EP_TYPE_BULK,\r
                                                                 ENDPOINT_DIR_IN, MSInterfaceInfo->Config.DataINEndpointSize,\r
                                                                 ENDPOINT_BANK_SINGLE)))\r

diff --git a/LUFA/Drivers/USB/Class/Device/MassStorage.h b/LUFA/Drivers/USB/Class/Device/MassStorage.h
index 22f7160..cd7a8ef 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/MassStorage.h
+++ b/LUFA/Drivers/USB/Class/Device/MassStorage.h
@@ -89,8 +89,7 @@
                                                                                        *   and that all current Mass Storage operations should immediately abort\r
                                                                                        */\r
                                } State; /**< State data for the USB class interface within the device. All elements in this section\r
-                                         *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
-                                         *   the interface is enumerated.\r
+                                         *   are reset to their defaults when the interface is enumerated.\r
                                          */\r
                        } USB_ClassInfo_MS_Device_t;\r
 \r

diff --git a/LUFA/Drivers/USB/Class/Device/RNDIS.c b/LUFA/Drivers/USB/Class/Device/RNDIS.c
index 37771c6..8131d87 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/RNDIS.c
+++ b/LUFA/Drivers/USB/Class/Device/RNDIS.c
@@ -112,6 +112,8 @@ void RNDIS_Device_ProcessControlPacket(USB_ClassInfo_RNDIS_Device_t* const RNDIS
 \r
 bool RNDIS_Device_ConfigureEndpoints(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)\r
 {\r
+       memset(&RNDISInterfaceInfo->State, 0x00, sizeof(RNDISInterfaceInfo->State));\r
+\r
        if (!(Endpoint_ConfigureEndpoint(RNDISInterfaceInfo->Config.DataINEndpointNumber, EP_TYPE_BULK,\r
                                                                 ENDPOINT_DIR_IN, RNDISInterfaceInfo->Config.DataINEndpointSize,\r
                                                                 ENDPOINT_BANK_SINGLE)))\r

diff --git a/LUFA/Drivers/USB/Class/Device/RNDIS.h b/LUFA/Drivers/USB/Class/Device/RNDIS.h
index 2aaf261..8855aac 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Device/RNDIS.h
@@ -97,8 +97,7 @@
                                                                                                         *   user application\r
                                                                                                         */\r
                                } State; /**< State data for the USB class interface within the device. All elements in this section\r
-                                         *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when\r
-                                         *   the interface is enumerated.\r
+                                         *   are reset to their defaults when the interface is enumerated.\r
                                          */\r
                        } USB_ClassInfo_RNDIS_Device_t;\r
        \r

diff --git a/LUFA/Drivers/USB/Class/Host/CDC.c b/LUFA/Drivers/USB/Class/Host/CDC.c
index 4402f33..9c59b5c 100644 (file)
--- a/LUFA/Drivers/USB/Class/Host/CDC.c
+++ b/LUFA/Drivers/USB/Class/Host/CDC.c
@@ -39,6 +39,8 @@ uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, uint
 {\r
        uint8_t  FoundEndpoints = 0;\r
 \r
+       memset(&CDCInterfaceInfo->State, 0x00, sizeof(CDCInterfaceInfo->State));\r
+\r
        if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)\r
          return CDC_ENUMERROR_InvalidConfigDescriptor;\r
        \r

diff --git a/LUFA/Drivers/USB/Class/Host/HID.c b/LUFA/Drivers/USB/Class/Host/HID.c
index 8639b48..6652cdc 100644 (file)
--- a/LUFA/Drivers/USB/Class/Host/HID.c
+++ b/LUFA/Drivers/USB/Class/Host/HID.c
@@ -39,6 +39,8 @@ uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* HIDInterfaceInfo, uint
 {\r
        uint8_t  FoundEndpoints = 0;\r
 \r
+       memset(&HIDInterfaceInfo->State, 0x00, sizeof(HIDInterfaceInfo->State));\r
+\r
        if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)\r
          return HID_ENUMERROR_InvalidConfigDescriptor;\r
        \r

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index f96168f..ff34ff2 100644 (file)
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -62,7 +62,7 @@
   *    to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while trasferring data\r
   *  - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is\r
   *    cleared to prevent endpoint type corruption\r
-  *  - Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken()\r
+  *  - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()\r
   *  - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)\r
   *  - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use\r
   *  - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command\r

diff --git a/LUFA/ManPages/DirectorySummaries.txt b/LUFA/ManPages/DirectorySummaries.txt
index 3b2c15f..c6691d7 100644 (file)
--- a/LUFA/ManPages/DirectorySummaries.txt
+++ b/LUFA/ManPages/DirectorySummaries.txt
@@ -33,7 +33,7 @@
  *  \r
  *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible only with\r
  *  the AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 USB AVR models, such as the AT90USB1287. Its contents should <b>not</b> be\r
- *  included by the user application - the dispatch header file located in the parent AT90USBXXX directory should be used\r
+ *  included by the user application - the dispatch header file located in the parent directory should be used\r
  *  instead.\r
  *\r
  *  \dir LUFA/Drivers/USB\r

diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 5ea8d9c..be84c36 100644 (file)
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -35,7 +35,7 @@
  *    - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that\r
  *      descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the USE_FLASH_DESCRIPTORS\r
  *      token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter.\r
- *    - Removed USB_IsSuspended - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.\r
+ *    - The USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.\r
  *\r
  *\r
  * \section Sec_Migration090605 Migrating from 090510 to 090605\r

diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c
index 2f0317d..9e85fbd 100644 (file)
--- a/Projects/Benito/Benito.c
+++ b/Projects/Benito/Benito.c
@@ -67,11 +67,6 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
                                .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,\r
                                .NotificationEndpointSize   = CDC_NOTIFICATION_EPSIZE,\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults\r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r

diff --git a/Projects/Magstripe/Magstripe.c b/Projects/Magstripe/Magstripe.c
index 087e510..aaa432d 100644 (file)
--- a/Projects/Magstripe/Magstripe.c
+++ b/Projects/Magstripe/Magstripe.c
@@ -60,11 +60,6 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
                                \r
                                .ReportINBufferSize      = sizeof(USB_KeyboardReport_Data_t),\r
                        },\r
-               \r
-               .State =\r
-                       {\r
-                               // Leave all state values to their defaults                             \r
-                       }\r
        };\r
 \r
 /** Main program entry point. This routine contains the overall program flow, including initial\r