3 Copyright (C) Dean Camera, 2009.
5 dean [at] fourwalledcubicle [dot] com
6 www.fourwalledcubicle.com
10 Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
12 Permission to use, copy, modify, and distribute this software
13 and its documentation for any purpose and without fee is hereby
14 granted, provided that the above copyright notice appear in all
15 copies and that both that the copyright notice and this
16 permission notice and warranty disclaimer appear in supporting
17 documentation, and that the name of the author not be used in
18 advertising or publicity pertaining to distribution of the
19 software without specific, written prior permission.
21 The author disclaim all warranties with regard to this
22 software, including all implied warranties of merchantability
23 and fitness. In no event shall the author be liable for any
24 special, indirect or consequential damages or any damages
25 whatsoever resulting from loss of use, data or profits, whether
26 in an action of contract, negligence or other tortious action,
27 arising out of or in connection with the use or performance of
31 /** \ingroup Group_USBClassCDC
32 * @defgroup Group_USBClassCDCDevice CDC Class Device Mode Driver
34 * \section Sec_Dependencies Module Source Dependencies
35 * The following files must be built with any user project that uses this module:
36 * - LUFA/Drivers/USB/Class/Device/CDC.c
38 * \section Module Description
39 * Device Mode USB Class driver framework interface, for the CDC USB Class driver.
44 #ifndef _CDC_CLASS_DEVICE_H_
45 #define _CDC_CLASS_DEVICE_H_
48 #include "../../USB.h"
49 #include "../Common/CDC.h"
53 /* Enable C linkage for C++ Compilers: */
54 #if defined(__cplusplus)
58 /* Public Interface - May be used in end-application: */
60 /** Class state structure. An instance of this structure should be made for each CDC interface
61 * within the user application, and passed to each of the CDC class driver functions as the
62 * CDCInterfaceInfo parameter. This stores each CDC interface's configuration and state information.
68 uint8_t ControlInterfaceNumber
; /**< Interface number of the CDC control interface within the device */
70 uint8_t DataINEndpointNumber
; /**< Endpoint number of the CDC interface's IN data endpoint */
71 uint16_t DataINEndpointSize
; /**< Size in bytes of the CDC interface's IN data endpoint */
73 uint8_t DataOUTEndpointNumber
; /**< Endpoint number of the CDC interface's OUT data endpoint */
74 uint16_t DataOUTEndpointSize
; /**< Size in bytes of the CDC interface's OUT data endpoint */
76 uint8_t NotificationEndpointNumber
; /**< Endpoint number of the CDC interface's IN notification endpoint, if used */
77 uint16_t NotificationEndpointSize
; /**< Size in bytes of the CDC interface's IN notification endpoint, if used */
78 } Config
; /**< Config data for the USB class interface within the device. All elements in this section
79 * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
85 uint8_t HostToDevice
; /**< Control line states from the host to device, as a set of CDC_CONTROL_LINE_OUT_*
88 uint8_t DeviceToHost
; /**< Control line states from the device to host, as a set of CDC_CONTROL_LINE_IN_*
95 uint32_t BaudRateBPS
; /**< Baud rate of the virtual serial port, in bits per second */
96 uint8_t CharFormat
; /**< Character format of the virtual serial port, a value from the
97 * CDCDevice_CDC_LineCodingFormats_t enum
99 uint8_t ParityType
; /**< Parity setting of the virtual serial port, a value from the
100 * CDCDevice_LineCodingParity_t enum
102 uint8_t DataBits
; /**< Bits of data per character of the virtual serial port */
104 } State
; /**< State data for the USB class interface within the device. All elements in this section
105 * are reset to their defaults when the interface is enumerated.
107 } USB_ClassInfo_CDC_Device_t
;
109 /* Function Prototypes: */
110 /** Configures the endpoints of a given CDC interface, ready for use. This should be linked to the library
111 * \ref EVENT_USB_ConfigurationChanged() event so that the endpoints are configured when the configuration containing the
112 * given CDC interface is selected.
114 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
116 * \return Boolean true if the endpoints were sucessfully configured, false otherwise
118 bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
120 /** Processes incomming control requests from the host, that are directed to the given CDC class interface. This should be
121 * linked to the library \ref EVENT_USB_UnhandledControlPacket() event.
123 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
125 void CDC_Device_ProcessControlPacket(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
127 /** General management task for a given CDC class interface, required for the correct operation of the interface. This should
128 * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
130 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
132 void CDC_Device_USBTask(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
134 /** CDC class driver event for a line encoding change on a CDC interface. This event fires each time the host requests a
135 * line encoding change (containing the serial parity, baud and other configuration information) and may be hooked in the
136 * user program by declaring a handler function with the same name and parameters listed here. The new line encoding
137 * settings are available in the LineEncoding structure inside the CDC interface structure passed as a parameter.
139 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
141 void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
143 /** CDC class driver event for a control line state change on a CDC interface. This event fires each time the host requests a
144 * control line state change (containing the virtual serial control line states, such as DTR) and may be hooked in the
145 * user program by declaring a handler function with the same name and parameters listed here. The new control line states
146 * are available in the ControlLineStates.HostToDevice value inside the CDC interface structure passed as a parameter, set as
147 * a mask of CDC_CONTROL_LINE_OUT_* masks.
149 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
151 void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
153 /** Sends a given string to the attached USB host, if connected. If a host is not connected when the function is called, the
154 * string is discarded.
156 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
157 * \param[in] Data Pointer to the string to send to the host
158 * \param[in] Length Size in bytes of the string to send to the host
160 void CDC_Device_SendString(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
, char* const Data
, const uint16_t Length
);
162 /** Sends a given byte to the attached USB host, if connected. If a host is not connected when the function is called, the
165 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
166 * \param[in] Data Byte of data to send to the host
168 void CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
, const uint8_t Data
);
170 /** Determines the number of bytes received by the CDC interface from the host, waiting to be read.
172 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
174 * \return Total number of buffered bytes received from the host
176 uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
178 /** Reads a byte of data from the host. If no data is waiting to be read of if a USB host is not connected, the function
179 * returns 0. The USB_CDC_BytesReceived() function should be queried before data is recieved to ensure that no data
182 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
184 * \return Next received byte from the host, or 0 if no data received
186 uint8_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
188 /** Sends a Serial Control Line State Change notification to the host. This should be called when the virtual serial
189 * control lines (DCD, DSR, etc.) have changed states, or to give BREAK notfications to the host. Line states persist
190 * until they are cleared via a second notification. This should be called each time the CDC class driver's
191 * ControlLineStates.DeviceToHost value is updated to push the new states to the USB host.
193 * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
195 void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
);
197 /* Private Interface - For use in library only: */
198 #if !defined(__DOXYGEN__)
199 /* Function Prototypes: */
200 #if defined(INCLUDE_FROM_CDC_CLASS_DEVICE_C)
201 void CDC_Device_Event_Stub(void);
202 void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
)
203 ATTR_WEAK
ATTR_ALIAS(CDC_Device_Event_Stub
);
204 void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t
* const CDCInterfaceInfo
)
205 ATTR_WEAK
ATTR_ALIAS(CDC_Device_Event_Stub
);
210 /* Disable C linkage for C++ Compilers: */
211 #if defined(__cplusplus)