-# Hey Emacs, this is a -*- makefile -*-\r
-#----------------------------------------------------------------------------\r
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.\r
-# >> Modified for use with the LUFA project. <<\r
-#\r
-# Released to the Public Domain\r
-#\r
-# Additional material for this makefile was written by:\r
-# Peter Fleury\r
-# Tim Henigan\r
-# Colin O'Flynn\r
-# Reiner Patommel\r
-# Markus Pfaff\r
-# Sander Pool\r
-# Frederik Rouleau\r
-# Carlos Lamas\r
-# Dean Camera\r
-# Opendous Inc.\r
-# Denver Gingerich\r
-#\r
-#----------------------------------------------------------------------------\r
-# On command line:\r
-#\r
-# make all = Make software.\r
-#\r
-# make clean = Clean out built project files.\r
-#\r
-# make dfu = Download the hex file to the device, using dfu-programmer (must\r
-# have dfu-programmer installed).\r
-#\r
-# make flip = Download the hex file to the device, using Atmel FLIP (must\r
-# have Atmel FLIP installed).\r
-#\r
-# make doxygen = Generate DoxyGen documentation for the project (must have\r
-# DoxyGen installed)\r
-#\r
-# make filename.s = Just compile filename.c into the assembler code only.\r
-#\r
-# make filename.i = Create a preprocessed source file for use in submitting\r
-# bug reports to the GCC project.\r
-#\r
-# To rebuild project do "make clean" then "make all".\r
-#----------------------------------------------------------------------------\r
-\r
-\r
-# MCU name\r
-MCU = uc3b0256\r
-\r
-\r
-# Target board (see library "Board Types" documentation, NONE for projects not requiring\r
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called\r
-# "Board" inside the application directory.\r
-BOARD = EVK1101\r
-\r
-\r
-# Targeted chip architecture (see library "Architectures" documentation)\r
-ARCH = UC3\r
-\r
-\r
-# Processor frequency.\r
-# This will define a symbol, F_CPU, in all source code files equal to the\r
-# processor frequency in Hz. You can then use this symbol in your source code to\r
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
-# automatically to create a 32-bit value in your source code.\r
-#\r
-# This will be an integer division of F_USB below, as it is sourced by\r
-# F_USB after it has run through any CPU prescalers. Note that this value\r
-# does not *change* the processor frequency - it should merely be updated to\r
-# reflect the processor speed set externally so that the code can use accurate\r
-# software delays.\r
-F_CPU = 12000000\r
-\r
-\r
-# Input clock frequency.\r
-# This will define a symbol, F_USB, in all source code files equal to the\r
-# input clock frequency (before any prescaling is performed) in Hz. This value may\r
-# differ from F_CPU if prescaling is used on the latter, and is required as the\r
-# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
-# at the end, this will be done automatically to create a 32-bit value in your\r
-# source code.\r
-#\r
-# If no clock division is performed on the input clock inside the AVR (via the\r
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
-F_USB = 48000000\r
-\r
-\r
-# Output format. (can be srec, ihex, binary)\r
-FORMAT = ihex\r
-\r
-\r
-# Target file name (without extension).\r
-TARGET = Mouse\r
-\r
-\r
-# Object files directory\r
-# To put object files in current directory, use a dot (.), do NOT make\r
-# this an empty or blank macro!\r
-OBJDIR = .\r
-\r
-\r
-# Path to the LUFA library\r
-LUFA_PATH = ../../../../\r
-\r
-\r
-# LUFA library compile-time options and predefined tokens\r
-LUFA_OPTS = -D USB_DEVICE_ONLY\r
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32\r
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_GCLK_SRC_PLL | USB_OPT_GCLK_CHANNEL_1)"\r
-\r
-\r
-# Create the LUFA source path variables by including the LUFA root makefile\r
-include $(LUFA_PATH)/LUFA/makefile\r
-\r
-\r
-# List C source files here. (C dependencies are automatically generated.)\r
-SRC = $(TARGET).c \\r
- Descriptors.c \\r
- $(LUFA_PATH)/LUFA/Platform/UC3/INTC.c \\r
- $(LUFA_SRC_USB) \\r
- $(LUFA_SRC_USBCLASS)\r
-\r
-\r
-# List C++ source files here. (C dependencies are automatically generated.)\r
-CPPSRC =\r
-\r
-\r
-# List Assembler source files here.\r
-# Make them always end in a capital .S. Files ending in a lowercase .s\r
-# will not be considered source files but generated files (assembler\r
-# output from the compiler), and will be deleted upon "make clean"!\r
-# Even though the DOS/Win* filesystem matches both .s and .S the same,\r
-# it will preserve the spelling of the filenames, and gcc itself does\r
-# care about how the name is spelled on its command-line.\r
-ASRC = $(LUFA_PATH)/LUFA/Platform/UC3/Exception.S\r
-\r
-\r
-# Optimization level, can be [0, 1, 2, 3, s].\r
-# 0 = turn off optimization. s = optimize for size.\r
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)\r
-OPT = 0\r
-\r
-\r
-# Debugging level.\r
-DEBUG = 3\r
-\r
-\r
-# List any extra directories to look for include files here.\r
-# Each directory must be seperated by a space.\r
-# Use forward slashes for directory separators.\r
-# For a directory that has spaces, enclose it in quotes.\r
-EXTRAINCDIRS = $(LUFA_PATH)/\r
-\r
-\r
-# Compiler flag to set the C Standard level.\r
-# c89 = "ANSI" C\r
-# gnu89 = c89 plus GCC extensions\r
-# c99 = ISO C99 standard (not yet fully implemented)\r
-# gnu99 = c99 plus GCC extensions\r
-CSTANDARD = -std=gnu99\r
-\r
-\r
-# Place -D or -U options here for C sources\r
-CDEFS = -DF_CPU=$(F_CPU)UL\r
-CDEFS += -DF_USB=$(F_USB)UL\r
-CDEFS += -DBOARD=BOARD_$(BOARD)\r
-CDEFS += -DARCH=ARCH_$(ARCH)\r
-CDEFS += $(LUFA_OPTS)\r
-\r
-\r
-# Place -D or -U options here for ASM sources\r
-ADEFS = -DF_CPU=$(F_CPU)\r
-ADEFS += -DF_USB=$(F_USB)UL\r
-ADEFS += -DBOARD=BOARD_$(BOARD)\r
-ADEFS += -DARCH=ARCH_$(ARCH)\r
-ADEFS += $(LUFA_OPTS)\r
-\r
-# Place -D or -U options here for C++ sources\r
-CPPDEFS = -DF_CPU=$(F_CPU)UL\r
-CPPDEFS += -DF_USB=$(F_USB)UL\r
-CPPDEFS += -DBOARD=BOARD_$(BOARD)\r
-CPPDEFS += -DARCH=ARCH_$(ARCH)\r
-CPPDEFS += $(LUFA_OPTS)\r
-#CPPDEFS += -D__STDC_LIMIT_MACROS\r
-#CPPDEFS += -D__STDC_CONSTANT_MACROS\r
-\r
-\r
-\r
-#---------------- Compiler Options C ----------------\r
-# -g*: generate debugging information\r
-# -O*: optimization level\r
-# -f...: tuning, see GCC manual and avr-libc documentation\r
-# -Wall...: warning level\r
-# -Wa,...: tell GCC to pass this to the assembler.\r
-# -adhlns...: create assembler listing\r
-CFLAGS = -g$(DEBUG)\r
-CFLAGS += $(CDEFS)\r
-CFLAGS += -O$(OPT)\r
-CFLAGS += -funsigned-char\r
-CFLAGS += -funsigned-bitfields\r
-CFLAGS += -ffunction-sections\r
-CFLAGS += -fno-strict-aliasing\r
-CFLAGS += -masm-addr-pseudos\r
-CFLAGS += -Wall\r
-CFLAGS += -Wstrict-prototypes\r
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)\r
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))\r
-CFLAGS += $(CSTANDARD)\r
-\r
-\r
-#---------------- Compiler Options C++ ----------------\r
-# -g*: generate debugging information\r
-# -O*: optimization level\r
-# -f...: tuning, see GCC manual and avr-libc documentation\r
-# -Wall...: warning level\r
-# -Wa,...: tell GCC to pass this to the assembler.\r
-# -adhlns...: create assembler listing\r
-CPPFLAGS = -g$(DEBUG)\r
-CPPFLAGS += $(CPPDEFS)\r
-CPPFLAGS += -O$(OPT)\r
-CPPFLAGS += -funsigned-char\r
-CPPFLAGS += -funsigned-bitfields\r
-CPPFLAGS += -ffunction-sections\r
-CPPFLAGS += -fno-strict-aliasing\r
-CPPFLAGS += -fno-exceptions\r
-CPPFLAGS += -masm-addr-pseudos\r
-CPPFLAGS += -Wall\r
-CPPFLAGS += -Wundef\r
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)\r
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))\r
-#CPPFLAGS += $(CSTANDARD)\r
-\r
-\r
-#---------------- Assembler Options ----------------\r
-# -Wa,...: tell GCC to pass this to the assembler.\r
-# -adhlns: create listing\r
-# -gstabs: have the assembler create line number information; note that\r
-# for use in COFF files, additional information about filenames\r
-# and function names needs to be present in the assembler source\r
-# files -- see avr-libc docs [FIXME: not yet described there]\r
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex\r
-# dump that will be displayed for a given single line of source input.\r
-ASFLAGS = -g3 $(ADEFS)\r
-\r
-\r
-#---------------- Linker Options ----------------\r
-# -Wl,...: tell GCC to pass this to linker.\r
-# -Map: create map file\r
-# --cref: add cross reference to map file\r
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref\r
-LDFLAGS += -Wl,--gc-sections --rodata-writable\r
-LDFLAGS += -Wl,--direct-data\r
-#LDFLAGS += -T avr32elf_uc3b0256.x\r
-\r
-\r
-#============================================================================\r
-\r
-\r
-# Define programs and commands.\r
-SHELL = sh\r
-CC = avr32-gcc\r
-OBJCOPY = avr32-objcopy\r
-OBJDUMP = avr32-objdump\r
-SIZE = avr32-size\r
-AR = avr32-ar rcs\r
-NM = avr32-nm\r
-REMOVE = rm -f\r
-REMOVEDIR = rm -rf\r
-COPY = cp\r
-WINSHELL = cmd\r
-\r
-\r
-# Define Messages\r
-# English\r
-MSG_ERRORS_NONE = Errors: none\r
-MSG_BEGIN = -------- begin --------\r
-MSG_END = -------- end --------\r
-MSG_SIZE_BEFORE = Size before:\r
-MSG_SIZE_AFTER = Size after:\r
-MSG_COFF = Converting to AVR COFF:\r
-MSG_FLASH = Creating load file for Flash:\r
-MSG_EEPROM = Creating load file for EEPROM:\r
-MSG_EXTENDED_LISTING = Creating Extended Listing:\r
-MSG_SYMBOL_TABLE = Creating Symbol Table:\r
-MSG_LINKING = Linking:\r
-MSG_COMPILING = Compiling C:\r
-MSG_COMPILING_CPP = Compiling C++:\r
-MSG_ASSEMBLING = Assembling:\r
-MSG_CLEANING = Cleaning project:\r
-MSG_CREATING_LIBRARY = Creating library:\r
-\r
-\r
-\r
-\r
-# Define all object files.\r
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)\r
-\r
-# Define all listing files.\r
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
-\r
-\r
-# Compiler flags to generate dependency files.\r
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d\r
-\r
-\r
-# Combine all necessary flags and optional flags.\r
-# Add target processor to flags.\r
-ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)\r
-ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)\r
-ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)\r
-\r
-\r
-\r
-\r
-\r
-# Default target.\r
-all: begin gccversion sizebefore build sizeafter end\r
-\r
-# Change the build target to build a HEX file or a library.\r
-build: elf hex lss sym\r
-#build: lib\r
-\r
-\r
-elf: $(TARGET).elf\r
-hex: $(TARGET).hex\r
-lss: $(TARGET).lss\r
-sym: $(TARGET).sym\r
-LIBNAME=lib$(TARGET).a\r
-lib: $(LIBNAME)\r
-\r
-\r
-\r
-# Eye candy.\r
-# AVR Studio 3.x does not check make's exit code but relies on\r
-# the following magic strings to be generated by the compile job.\r
-begin:\r
- @echo\r
- @echo $(MSG_BEGIN)\r
-\r
-end:\r
- @echo $(MSG_END)\r
- @echo\r
-\r
-\r
-# Display size of file.\r
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex\r
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf\r
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )\r
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )\r
-\r
-\r
-sizebefore:\r
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \\r
- 2>/dev/null; echo; fi\r
-\r
-sizeafter:\r
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
- 2>/dev/null; echo; fi\r
-\r
-\r
-\r
-# Display compiler version information.\r
-gccversion :\r
- @$(CC) --version\r
-\r
-\r
-# Program the device.\r
-flip: $(TARGET).hex\r
- batchisp -hardware usb -device $(MCU) -operation erase f\r
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
-\r
-dfu: $(TARGET).hex\r
- dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) flash $(TARGET).hex\r
- dfu-programmer $(MCU) reset\r
-\r
-\r
-# Create final output files (.hex, .eep) from ELF output file.\r
-%.hex: %.elf\r
- @echo\r
- @echo $(MSG_FLASH) $@\r
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@\r
-\r
-# Create extended listing file from ELF output file.\r
-%.lss: %.elf\r
- @echo\r
- @echo $(MSG_EXTENDED_LISTING) $@\r
- $(OBJDUMP) -h -S $< > $@\r
-\r
-# Create a symbol table from ELF output file.\r
-%.sym: %.elf\r
- @echo\r
- @echo $(MSG_SYMBOL_TABLE) $@\r
- $(NM) -n $< > $@\r
-\r
-\r
-\r
-# Create library from object files.\r
-.SECONDARY : $(TARGET).a\r
-.PRECIOUS : $(OBJ)\r
-%.a: $(OBJ)\r
- @echo\r
- @echo $(MSG_CREATING_LIBRARY) $@\r
- $(AR) $@ $(OBJ)\r
-\r
-\r
-# Link: create ELF output file from object files.\r
-.SECONDARY : $(TARGET).elf\r
-.PRECIOUS : $(OBJ)\r
-%.elf: $(OBJ)\r
- @echo\r
- @echo $(MSG_LINKING) $@\r
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)\r
-\r
-\r
-# Compile: create object files from C source files.\r
-$(OBJDIR)/%.o : %.c\r
- @echo\r
- @echo $(MSG_COMPILING) $<\r
- $(CC) -c $(ALL_CFLAGS) $< -o $@\r
-\r
-\r
-# Compile: create object files from C++ source files.\r
-$(OBJDIR)/%.o : %.cpp\r
- @echo\r
- @echo $(MSG_COMPILING_CPP) $<\r
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@\r
-\r
-\r
-# Compile: create assembler files from C source files.\r
-%.s : %.c\r
- $(CC) -S $(ALL_CFLAGS) $< -o $@\r
-\r
-\r
-# Compile: create assembler files from C++ source files.\r
-%.s : %.cpp\r
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@\r
-\r
-\r
-# Assemble: create object files from assembler source files.\r
-$(OBJDIR)/%.o : %.S\r
- @echo\r
- @echo $(MSG_ASSEMBLING) $<\r
- $(CC) -c $(ALL_ASFLAGS) $< -o $@\r
-\r
-\r
-# Create preprocessed source for use in sending a bug report.\r
-%.i : %.c\r
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@\r
-\r
-\r
-# Target: clean project.\r
-clean: begin clean_list end\r
-\r
-clean_list :\r
- @echo\r
- @echo $(MSG_CLEANING)\r
- $(REMOVE) $(TARGET).hex\r
- $(REMOVE) $(TARGET).cof\r
- $(REMOVE) $(TARGET).elf\r
- $(REMOVE) $(TARGET).map\r
- $(REMOVE) $(TARGET).sym\r
- $(REMOVE) $(TARGET).lss\r
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)\r
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
- $(REMOVE) $(SRC:.c=.s)\r
- $(REMOVE) $(SRC:.c=.d)\r
- $(REMOVE) $(SRC:.c=.i)\r
- $(REMOVEDIR) .dep\r
-\r
-doxygen:\r
- @echo Generating Project Documentation...\r
- @doxygen Doxygen.conf\r
- @echo Documentation Generation Complete.\r
-\r
-clean_doxygen:\r
- rm -rf Documentation\r
-\r
-# Create object files directory\r
-$(shell mkdir $(OBJDIR) 2>/dev/null)\r
-\r
-\r
-# Include the dependency files.\r
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)\r
-\r
-\r
-# Listing of phony targets.\r
-.PHONY : all begin finish end sizebefore sizeafter gccversion \\r
-build elf hex lss sym doxygen clean clean_list clean_doxygen \\r
-dfu flip\r
-\r
projects / pub / USBasp.git / commitdiff