Oops - need to turn off USART via control register B before reconfiguring, fix orderi...

diff --git a/Demos/Host/LowLevel/makefile b/Demos/Host/LowLevel/makefile
index 2a1caed..2dec7c8 100644 (file)
--- a/Demos/Host/LowLevel/makefile
+++ b/Demos/Host/LowLevel/makefile
@@ -38,12 +38,12 @@ all:
        $(MAKE) -C PrinterHost clean
        $(MAKE) -C PrinterHost all
 
-       $(MAKE) -C StillImageHost clean
-       $(MAKE) -C StillImageHost all
-
        $(MAKE) -C RNDISEthernetHost clean
        $(MAKE) -C RNDISEthernetHost all
 
+       $(MAKE) -C StillImageHost clean
+       $(MAKE) -C StillImageHost all
+
        $(MAKE) -C VirtualSerialHost clean
        $(MAKE) -C VirtualSerialHost all
 
@@ -57,6 +57,6 @@ all:
        $(MAKE) -C MouseHost $@
        $(MAKE) -C MouseHostWithParser $@
        $(MAKE) -C PrinterHost $@
-       $(MAKE) -C StillImageHost $@
        $(MAKE) -C RNDISEthernetHost $@
+       $(MAKE) -C StillImageHost $@
        $(MAKE) -C VirtualSerialHost $@

diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c
index 834554b..23786fb 100644 (file)
--- a/Projects/Benito/Benito.c
+++ b/Projects/Benito/Benito.c
@@ -236,17 +236,17 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
        }
        
        /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
-       UCSR1A = 0;
        UCSR1B = 0;
+       UCSR1A = 0;
        UCSR1C = 0;
 
        /* Set the new baud rate before configuring the USART */
        UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
        
        /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
+       UCSR1C = ConfigMask;
        UCSR1A = (1 << U2X1);   
        UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
-       UCSR1C = ConfigMask;
 }
 
 /** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer

diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c
index b59a364..2c2d0c0 100644 (file)
--- a/Projects/USBtoSerial/USBtoSerial.c
+++ b/Projects/USBtoSerial/USBtoSerial.c
@@ -200,15 +200,15 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
        }
 
        /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
-       UCSR1A = 0;
        UCSR1B = 0;
+       UCSR1A = 0;
        UCSR1C = 0;
 
        /* Set the new baud rate before configuring the USART */
        UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
        
        /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
+       UCSR1C = ConfigMask;
        UCSR1A = (1 << U2X1);   
        UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
-       UCSR1C = ConfigMask;
 }