+# Doxyfile 1.5.7.1\r
+\r
+# This file describes the settings to be used by the documentation system\r
+# doxygen (www.doxygen.org) for a project\r
+#\r
+# All text after a hash (#) is considered a comment and will be ignored\r
+# The format is:\r
+# TAG = value [value, ...]\r
+# For lists items can also be appended using:\r
+# TAG += value [value, ...]\r
+# Values that contain spaces should be placed between quotes (" ")\r
+\r
+#---------------------------------------------------------------------------\r
+# Project related configuration options\r
+#---------------------------------------------------------------------------\r
+\r
+# This tag specifies the encoding used for all characters in the config file \r
+# that follow. The default is UTF-8 which is also the encoding used for all \r
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the \r
+# iconv built into libc) for the transcoding. See \r
+# http://www.gnu.org/software/libiconv for the list of possible encodings.\r
+\r
+DOXYFILE_ENCODING = UTF-8\r
+\r
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded \r
+# by quotes) that should identify the project.\r
+\r
+PROJECT_NAME = "LUFA Library - Generic HID Host Demo"\r
+\r
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. \r
+# This could be handy for archiving the generated documentation or \r
+# if some version control system is used.\r
+\r
+PROJECT_NUMBER = 0.0.0\r
+\r
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) \r
+# base path where the generated documentation will be put. \r
+# If a relative path is entered, it will be relative to the location \r
+# where doxygen was started. If left blank the current directory will be used.\r
+\r
+OUTPUT_DIRECTORY = ./Documentation/\r
+\r
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create \r
+# 4096 sub-directories (in 2 levels) under the output directory of each output \r
+# format and will distribute the generated files over these directories. \r
+# Enabling this option can be useful when feeding doxygen a huge amount of \r
+# source files, where putting all generated files in the same directory would \r
+# otherwise cause performance problems for the file system.\r
+\r
+CREATE_SUBDIRS = YES\r
+\r
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all \r
+# documentation generated by doxygen is written. Doxygen will use this \r
+# information to generate all constant output in the proper language. \r
+# The default language is English, other supported languages are: \r
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, \r
+# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, \r
+# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), \r
+# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, \r
+# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, \r
+# Spanish, Swedish, and Ukrainian.\r
+\r
+OUTPUT_LANGUAGE = English\r
+\r
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will \r
+# include brief member descriptions after the members that are listed in \r
+# the file and class documentation (similar to JavaDoc). \r
+# Set to NO to disable this.\r
+\r
+BRIEF_MEMBER_DESC = YES\r
+\r
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend \r
+# the brief description of a member or function before the detailed description. \r
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the \r
+# brief descriptions will be completely suppressed.\r
+\r
+REPEAT_BRIEF = YES\r
+\r
+# This tag implements a quasi-intelligent brief description abbreviator \r
+# that is used to form the text in various listings. Each string \r
+# in this list, if found as the leading text of the brief description, will be \r
+# stripped from the text and the result after processing the whole list, is \r
+# used as the annotated text. Otherwise, the brief description is used as-is. \r
+# If left blank, the following values are used ("$name" is automatically \r
+# replaced with the name of the entity): "The $name class" "The $name widget" \r
+# "The $name file" "is" "provides" "specifies" "contains" \r
+# "represents" "a" "an" "the"\r
+\r
+ABBREVIATE_BRIEF = "The $name class" \\r
+ "The $name widget" \\r
+ "The $name file" \\r
+ is \\r
+ provides \\r
+ specifies \\r
+ contains \\r
+ represents \\r
+ a \\r
+ an \\r
+ the\r
+\r
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then \r
+# Doxygen will generate a detailed section even if there is only a brief \r
+# description.\r
+\r
+ALWAYS_DETAILED_SEC = NO\r
+\r
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all \r
+# inherited members of a class in the documentation of that class as if those \r
+# members were ordinary class members. Constructors, destructors and assignment \r
+# operators of the base classes will not be shown.\r
+\r
+INLINE_INHERITED_MEMB = NO\r
+\r
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full \r
+# path before files name in the file list and in the header files. If set \r
+# to NO the shortest path that makes the file name unique will be used.\r
+\r
+FULL_PATH_NAMES = YES\r
+\r
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag \r
+# can be used to strip a user-defined part of the path. Stripping is \r
+# only done if one of the specified strings matches the left-hand part of \r
+# the path. The tag can be used to show relative paths in the file list. \r
+# If left blank the directory from which doxygen is run is used as the \r
+# path to strip.\r
+\r
+STRIP_FROM_PATH = \r
+\r
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of \r
+# the path mentioned in the documentation of a class, which tells \r
+# the reader which header file to include in order to use a class. \r
+# If left blank only the name of the header file containing the class \r
+# definition is used. Otherwise one should specify the include paths that \r
+# are normally passed to the compiler using the -I flag.\r
+\r
+STRIP_FROM_INC_PATH = \r
+\r
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter \r
+# (but less readable) file names. This can be useful is your file systems \r
+# doesn't support long names like on DOS, Mac, or CD-ROM.\r
+\r
+SHORT_NAMES = YES\r
+\r
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen \r
+# will interpret the first line (until the first dot) of a JavaDoc-style \r
+# comment as the brief description. If set to NO, the JavaDoc \r
+# comments will behave just like regular Qt-style comments \r
+# (thus requiring an explicit @brief command for a brief description.)\r
+\r
+JAVADOC_AUTOBRIEF = NO\r
+\r
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will \r
+# interpret the first line (until the first dot) of a Qt-style \r
+# comment as the brief description. If set to NO, the comments \r
+# will behave just like regular Qt-style comments (thus requiring \r
+# an explicit \brief command for a brief description.)\r
+\r
+QT_AUTOBRIEF = NO\r
+\r
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen \r
+# treat a multi-line C++ special comment block (i.e. a block of //! or /// \r
+# comments) as a brief description. This used to be the default behaviour. \r
+# The new default is to treat a multi-line C++ comment block as a detailed \r
+# description. Set this tag to YES if you prefer the old behaviour instead.\r
+\r
+MULTILINE_CPP_IS_BRIEF = NO\r
+\r
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented \r
+# member inherits the documentation from any documented member that it \r
+# re-implements.\r
+\r
+INHERIT_DOCS = YES\r
+\r
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce \r
+# a new page for each member. If set to NO, the documentation of a member will \r
+# be part of the file/class/namespace that contains it.\r
+\r
+SEPARATE_MEMBER_PAGES = NO\r
+\r
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. \r
+# Doxygen uses this value to replace tabs by spaces in code fragments.\r
+\r
+TAB_SIZE = 4\r
+\r
+# This tag can be used to specify a number of aliases that acts \r
+# as commands in the documentation. An alias has the form "name=value". \r
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to \r
+# put the command \sideeffect (or @sideeffect) in the documentation, which \r
+# will result in a user-defined paragraph with heading "Side Effects:". \r
+# You can put \n's in the value part of an alias to insert newlines.\r
+\r
+ALIASES = \r
+\r
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C \r
+# sources only. Doxygen will then generate output that is more tailored for C. \r
+# For instance, some of the names that are used will be different. The list \r
+# of all members will be omitted, etc.\r
+\r
+OPTIMIZE_OUTPUT_FOR_C = YES\r
+\r
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java \r
+# sources only. Doxygen will then generate output that is more tailored for \r
+# Java. For instance, namespaces will be presented as packages, qualified \r
+# scopes will look different, etc.\r
+\r
+OPTIMIZE_OUTPUT_JAVA = NO\r
+\r
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran \r
+# sources only. Doxygen will then generate output that is more tailored for \r
+# Fortran.\r
+\r
+OPTIMIZE_FOR_FORTRAN = NO\r
+\r
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL \r
+# sources. Doxygen will then generate output that is tailored for \r
+# VHDL.\r
+\r
+OPTIMIZE_OUTPUT_VHDL = NO\r
+\r
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want \r
+# to include (a tag file for) the STL sources as input, then you should \r
+# set this tag to YES in order to let doxygen match functions declarations and \r
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. \r
+# func(std::string) {}). This also make the inheritance and collaboration \r
+# diagrams that involve STL classes more complete and accurate.\r
+\r
+BUILTIN_STL_SUPPORT = NO\r
+\r
+# If you use Microsoft's C++/CLI language, you should set this option to YES to\r
+# enable parsing support.\r
+\r
+CPP_CLI_SUPPORT = NO\r
+\r
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. \r
+# Doxygen will parse them like normal C++ but will assume all classes use public \r
+# instead of private inheritance when no explicit protection keyword is present.\r
+\r
+SIP_SUPPORT = NO\r
+\r
+# For Microsoft's IDL there are propget and propput attributes to indicate getter \r
+# and setter methods for a property. Setting this option to YES (the default) \r
+# will make doxygen to replace the get and set methods by a property in the \r
+# documentation. This will only work if the methods are indeed getting or \r
+# setting a simple type. If this is not the case, or you want to show the \r
+# methods anyway, you should set this option to NO.\r
+\r
+IDL_PROPERTY_SUPPORT = YES\r
+\r
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC \r
+# tag is set to YES, then doxygen will reuse the documentation of the first \r
+# member in the group (if any) for the other members of the group. By default \r
+# all members of a group must be documented explicitly.\r
+\r
+DISTRIBUTE_GROUP_DOC = NO\r
+\r
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of \r
+# the same type (for instance a group of public functions) to be put as a \r
+# subgroup of that type (e.g. under the Public Functions section). Set it to \r
+# NO to prevent subgrouping. Alternatively, this can be done per class using \r
+# the \nosubgrouping command.\r
+\r
+SUBGROUPING = YES\r
+\r
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum \r
+# is documented as struct, union, or enum with the name of the typedef. So \r
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct \r
+# with name TypeT. When disabled the typedef will appear as a member of a file, \r
+# namespace, or class. And the struct will be named TypeS. This can typically \r
+# be useful for C code in case the coding convention dictates that all compound \r
+# types are typedef'ed and only the typedef is referenced, never the tag name.\r
+\r
+TYPEDEF_HIDES_STRUCT = NO\r
+\r
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to \r
+# determine which symbols to keep in memory and which to flush to disk.\r
+# When the cache is full, less often used symbols will be written to disk.\r
+# For small to medium size projects (<1000 input files) the default value is \r
+# probably good enough. For larger projects a too small cache size can cause \r
+# doxygen to be busy swapping symbols to and from disk most of the time \r
+# causing a significant performance penality. \r
+# If the system has enough physical memory increasing the cache will improve the \r
+# performance by keeping more symbols in memory. Note that the value works on \r
+# a logarithmic scale so increasing the size by one will rougly double the \r
+# memory usage. The cache size is given by this formula: \r
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, \r
+# corresponding to a cache size of 2^16 = 65536 symbols\r
+\r
+SYMBOL_CACHE_SIZE = 0\r
+\r
+#---------------------------------------------------------------------------\r
+# Build related configuration options\r
+#---------------------------------------------------------------------------\r
+\r
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in \r
+# documentation are documented, even if no documentation was available. \r
+# Private class members and static file members will be hidden unless \r
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES\r
+\r
+EXTRACT_ALL = YES\r
+\r
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class \r
+# will be included in the documentation.\r
+\r
+EXTRACT_PRIVATE = YES\r
+\r
+# If the EXTRACT_STATIC tag is set to YES all static members of a file \r
+# will be included in the documentation.\r
+\r
+EXTRACT_STATIC = YES\r
+\r
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) \r
+# defined locally in source files will be included in the documentation. \r
+# If set to NO only classes defined in header files are included.\r
+\r
+EXTRACT_LOCAL_CLASSES = YES\r
+\r
+# This flag is only useful for Objective-C code. When set to YES local \r
+# methods, which are defined in the implementation section but not in \r
+# the interface are included in the documentation. \r
+# If set to NO (the default) only methods in the interface are included.\r
+\r
+EXTRACT_LOCAL_METHODS = NO\r
+\r
+# If this flag is set to YES, the members of anonymous namespaces will be \r
+# extracted and appear in the documentation as a namespace called \r
+# 'anonymous_namespace{file}', where file will be replaced with the base \r
+# name of the file that contains the anonymous namespace. By default \r
+# anonymous namespace are hidden.\r
+\r
+EXTRACT_ANON_NSPACES = NO\r
+\r
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all \r
+# undocumented members of documented classes, files or namespaces. \r
+# If set to NO (the default) these members will be included in the \r
+# various overviews, but no documentation section is generated. \r
+# This option has no effect if EXTRACT_ALL is enabled.\r
+\r
+HIDE_UNDOC_MEMBERS = NO\r
+\r
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all \r
+# undocumented classes that are normally visible in the class hierarchy. \r
+# If set to NO (the default) these classes will be included in the various \r
+# overviews. This option has no effect if EXTRACT_ALL is enabled.\r
+\r
+HIDE_UNDOC_CLASSES = NO\r
+\r
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all \r
+# friend (class|struct|union) declarations. \r
+# If set to NO (the default) these declarations will be included in the \r
+# documentation.\r
+\r
+HIDE_FRIEND_COMPOUNDS = NO\r
+\r
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any \r
+# documentation blocks found inside the body of a function. \r
+# If set to NO (the default) these blocks will be appended to the \r
+# function's detailed documentation block.\r
+\r
+HIDE_IN_BODY_DOCS = NO\r
+\r
+# The INTERNAL_DOCS tag determines if documentation \r
+# that is typed after a \internal command is included. If the tag is set \r
+# to NO (the default) then the documentation will be excluded. \r
+# Set it to YES to include the internal documentation.\r
+\r
+INTERNAL_DOCS = NO\r
+\r
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate \r
+# file names in lower-case letters. If set to YES upper-case letters are also \r
+# allowed. This is useful if you have classes or files whose names only differ \r
+# in case and if your file system supports case sensitive file names. Windows \r
+# and Mac users are advised to set this option to NO.\r
+\r
+CASE_SENSE_NAMES = NO\r
+\r
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen \r
+# will show members with their full class and namespace scopes in the \r
+# documentation. If set to YES the scope will be hidden.\r
+\r
+HIDE_SCOPE_NAMES = NO\r
+\r
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen \r
+# will put a list of the files that are included by a file in the documentation \r
+# of that file.\r
+\r
+SHOW_INCLUDE_FILES = YES\r
+\r
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] \r
+# is inserted in the documentation for inline members.\r
+\r
+INLINE_INFO = YES\r
+\r
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen \r
+# will sort the (detailed) documentation of file and class members \r
+# alphabetically by member name. If set to NO the members will appear in \r
+# declaration order.\r
+\r
+SORT_MEMBER_DOCS = YES\r
+\r
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the \r
+# brief documentation of file, namespace and class members alphabetically \r
+# by member name. If set to NO (the default) the members will appear in \r
+# declaration order.\r
+\r
+SORT_BRIEF_DOCS = NO\r
+\r
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the \r
+# hierarchy of group names into alphabetical order. If set to NO (the default) \r
+# the group names will appear in their defined order.\r
+\r
+SORT_GROUP_NAMES = NO\r
+\r
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be \r
+# sorted by fully-qualified names, including namespaces. If set to \r
+# NO (the default), the class list will be sorted only by class name, \r
+# not including the namespace part. \r
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.\r
+# Note: This option applies only to the class list, not to the \r
+# alphabetical list.\r
+\r
+SORT_BY_SCOPE_NAME = NO\r
+\r
+# The GENERATE_TODOLIST tag can be used to enable (YES) or \r
+# disable (NO) the todo list. This list is created by putting \todo \r
+# commands in the documentation.\r
+\r
+GENERATE_TODOLIST = NO\r
+\r
+# The GENERATE_TESTLIST tag can be used to enable (YES) or \r
+# disable (NO) the test list. This list is created by putting \test \r
+# commands in the documentation.\r
+\r
+GENERATE_TESTLIST = NO\r
+\r
+# The GENERATE_BUGLIST tag can be used to enable (YES) or \r
+# disable (NO) the bug list. This list is created by putting \bug \r
+# commands in the documentation.\r
+\r
+GENERATE_BUGLIST = NO\r
+\r
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or \r
+# disable (NO) the deprecated list. This list is created by putting \r
+# \deprecated commands in the documentation.\r
+\r
+GENERATE_DEPRECATEDLIST= YES\r
+\r
+# The ENABLED_SECTIONS tag can be used to enable conditional \r
+# documentation sections, marked by \if sectionname ... \endif.\r
+\r
+ENABLED_SECTIONS = \r
+\r
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines \r
+# the initial value of a variable or define consists of for it to appear in \r
+# the documentation. If the initializer consists of more lines than specified \r
+# here it will be hidden. Use a value of 0 to hide initializers completely. \r
+# The appearance of the initializer of individual variables and defines in the \r
+# documentation can be controlled using \showinitializer or \hideinitializer \r
+# command in the documentation regardless of this setting.\r
+\r
+MAX_INITIALIZER_LINES = 30\r
+\r
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated \r
+# at the bottom of the documentation of classes and structs. If set to YES the \r
+# list will mention the files that were used to generate the documentation.\r
+\r
+SHOW_USED_FILES = YES\r
+\r
+# If the sources in your project are distributed over multiple directories \r
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy \r
+# in the documentation. The default is NO.\r
+\r
+SHOW_DIRECTORIES = YES\r
+\r
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.\r
+# This will remove the Files entry from the Quick Index and from the \r
+# Folder Tree View (if specified). The default is YES.\r
+\r
+SHOW_FILES = YES\r
+\r
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the \r
+# Namespaces page. This will remove the Namespaces entry from the Quick Index\r
+# and from the Folder Tree View (if specified). The default is YES.\r
+\r
+SHOW_NAMESPACES = YES\r
+\r
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that \r
+# doxygen should invoke to get the current version for each file (typically from \r
+# the version control system). Doxygen will invoke the program by executing (via \r
+# popen()) the command <command> <input-file>, where <command> is the value of \r
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file \r
+# provided by doxygen. Whatever the program writes to standard output \r
+# is used as the file version. See the manual for examples.\r
+\r
+FILE_VERSION_FILTER = \r
+\r
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by \r
+# doxygen. The layout file controls the global structure of the generated output files \r
+# in an output format independent way. The create the layout file that represents \r
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a \r
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name \r
+# of the layout file.\r
+\r
+LAYOUT_FILE = \r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to warning and progress messages\r
+#---------------------------------------------------------------------------\r
+\r
+# The QUIET tag can be used to turn on/off the messages that are generated \r
+# by doxygen. Possible values are YES and NO. If left blank NO is used.\r
+\r
+QUIET = YES\r
+\r
+# The WARNINGS tag can be used to turn on/off the warning messages that are \r
+# generated by doxygen. Possible values are YES and NO. If left blank \r
+# NO is used.\r
+\r
+WARNINGS = YES\r
+\r
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings \r
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will \r
+# automatically be disabled.\r
+\r
+WARN_IF_UNDOCUMENTED = YES\r
+\r
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for \r
+# potential errors in the documentation, such as not documenting some \r
+# parameters in a documented function, or documenting parameters that \r
+# don't exist or using markup commands wrongly.\r
+\r
+WARN_IF_DOC_ERROR = YES\r
+\r
+# This WARN_NO_PARAMDOC option can be abled to get warnings for \r
+# functions that are documented, but have no documentation for their parameters \r
+# or return value. If set to NO (the default) doxygen will only warn about \r
+# wrong or incomplete parameter documentation, but not about the absence of \r
+# documentation.\r
+\r
+WARN_NO_PARAMDOC = YES\r
+\r
+# The WARN_FORMAT tag determines the format of the warning messages that \r
+# doxygen can produce. The string should contain the $file, $line, and $text \r
+# tags, which will be replaced by the file and line number from which the \r
+# warning originated and the warning text. Optionally the format may contain \r
+# $version, which will be replaced by the version of the file (if it could \r
+# be obtained via FILE_VERSION_FILTER)\r
+\r
+WARN_FORMAT = "$file:$line: $text"\r
+\r
+# The WARN_LOGFILE tag can be used to specify a file to which warning \r
+# and error messages should be written. If left blank the output is written \r
+# to stderr.\r
+\r
+WARN_LOGFILE = \r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the input files\r
+#---------------------------------------------------------------------------\r
+\r
+# The INPUT tag can be used to specify the files and/or directories that contain \r
+# documented source files. You may enter file names like "myfile.cpp" or \r
+# directories like "/usr/src/myproject". Separate the files or directories \r
+# with spaces.\r
+\r
+INPUT = ./\r
+\r
+# This tag can be used to specify the character encoding of the source files \r
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is \r
+# also the default input encoding. Doxygen uses libiconv (or the iconv built \r
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for \r
+# the list of possible encodings.\r
+\r
+INPUT_ENCODING = UTF-8\r
+\r
+# If the value of the INPUT tag contains directories, you can use the \r
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp \r
+# and *.h) to filter out the source-files in the directories. If left \r
+# blank the following patterns are tested: \r
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx \r
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90\r
+\r
+FILE_PATTERNS = *.h \\r
+ *.c \\r
+ *.txt\r
+\r
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories \r
+# should be searched for input files as well. Possible values are YES and NO. \r
+# If left blank NO is used.\r
+\r
+RECURSIVE = YES\r
+\r
+# The EXCLUDE tag can be used to specify files and/or directories that should \r
+# excluded from the INPUT source files. This way you can easily exclude a \r
+# subdirectory from a directory tree whose root is specified with the INPUT tag.\r
+\r
+EXCLUDE = \r
+\r
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or \r
+# directories that are symbolic links (a Unix filesystem feature) are excluded \r
+# from the input.\r
+\r
+EXCLUDE_SYMLINKS = NO\r
+\r
+# If the value of the INPUT tag contains directories, you can use the \r
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude \r
+# certain files from those directories. Note that the wildcards are matched \r
+# against the file with absolute path, so to exclude all test directories \r
+# for example use the pattern */test/*\r
+\r
+EXCLUDE_PATTERNS = */LowLevel/USBMode.h\r
+\r
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names \r
+# (namespaces, classes, functions, etc.) that should be excluded from the \r
+# output. The symbol name can be a fully qualified name, a word, or if the \r
+# wildcard * is used, a substring. Examples: ANamespace, AClass, \r
+# AClass::ANamespace, ANamespace::*Test\r
+\r
+EXCLUDE_SYMBOLS = __*\r
+\r
+# The EXAMPLE_PATH tag can be used to specify one or more files or \r
+# directories that contain example code fragments that are included (see \r
+# the \include command).\r
+\r
+EXAMPLE_PATH = \r
+\r
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the \r
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp \r
+# and *.h) to filter out the source-files in the directories. If left \r
+# blank all files are included.\r
+\r
+EXAMPLE_PATTERNS = *\r
+\r
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be \r
+# searched for input files to be used with the \include or \dontinclude \r
+# commands irrespective of the value of the RECURSIVE tag. \r
+# Possible values are YES and NO. If left blank NO is used.\r
+\r
+EXAMPLE_RECURSIVE = NO\r
+\r
+# The IMAGE_PATH tag can be used to specify one or more files or \r
+# directories that contain image that are included in the documentation (see \r
+# the \image command).\r
+\r
+IMAGE_PATH = \r
+\r
+# The INPUT_FILTER tag can be used to specify a program that doxygen should \r
+# invoke to filter for each input file. Doxygen will invoke the filter program \r
+# by executing (via popen()) the command <filter> <input-file>, where <filter> \r
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an \r
+# input file. Doxygen will then use the output that the filter program writes \r
+# to standard output. If FILTER_PATTERNS is specified, this tag will be \r
+# ignored.\r
+\r
+INPUT_FILTER = \r
+\r
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern \r
+# basis. Doxygen will compare the file name with each pattern and apply the \r
+# filter if there is a match. The filters are a list of the form: \r
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further \r
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER \r
+# is applied to all files.\r
+\r
+FILTER_PATTERNS = \r
+\r
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using \r
+# INPUT_FILTER) will be used to filter the input files when producing source \r
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).\r
+\r
+FILTER_SOURCE_FILES = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to source browsing\r
+#---------------------------------------------------------------------------\r
+\r
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will \r
+# be generated. Documented entities will be cross-referenced with these sources. \r
+# Note: To get rid of all source code in the generated output, make sure also \r
+# VERBATIM_HEADERS is set to NO.\r
+\r
+SOURCE_BROWSER = NO\r
+\r
+# Setting the INLINE_SOURCES tag to YES will include the body \r
+# of functions and classes directly in the documentation.\r
+\r
+INLINE_SOURCES = NO\r
+\r
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct \r
+# doxygen to hide any special comment blocks from generated source code \r
+# fragments. Normal C and C++ comments will always remain visible.\r
+\r
+STRIP_CODE_COMMENTS = YES\r
+\r
+# If the REFERENCED_BY_RELATION tag is set to YES \r
+# then for each documented function all documented \r
+# functions referencing it will be listed.\r
+\r
+REFERENCED_BY_RELATION = NO\r
+\r
+# If the REFERENCES_RELATION tag is set to YES \r
+# then for each documented function all documented entities \r
+# called/used by that function will be listed.\r
+\r
+REFERENCES_RELATION = NO\r
+\r
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)\r
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from\r
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will\r
+# link to the source code. Otherwise they will link to the documentstion.\r
+\r
+REFERENCES_LINK_SOURCE = NO\r
+\r
+# If the USE_HTAGS tag is set to YES then the references to source code \r
+# will point to the HTML generated by the htags(1) tool instead of doxygen \r
+# built-in source browser. The htags tool is part of GNU's global source \r
+# tagging system (see http://www.gnu.org/software/global/global.html). You \r
+# will need version 4.8.6 or higher.\r
+\r
+USE_HTAGS = NO\r
+\r
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen \r
+# will generate a verbatim copy of the header file for each class for \r
+# which an include is specified. Set to NO to disable this.\r
+\r
+VERBATIM_HEADERS = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the alphabetical class index\r
+#---------------------------------------------------------------------------\r
+\r
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index \r
+# of all compounds will be generated. Enable this if the project \r
+# contains a lot of classes, structs, unions or interfaces.\r
+\r
+ALPHABETICAL_INDEX = YES\r
+\r
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then \r
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns \r
+# in which this list will be split (can be a number in the range [1..20])\r
+\r
+COLS_IN_ALPHA_INDEX = 5\r
+\r
+# In case all classes in a project start with a common prefix, all \r
+# classes will be put under the same header in the alphabetical index. \r
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that \r
+# should be ignored while generating the index headers.\r
+\r
+IGNORE_PREFIX = \r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the HTML output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will \r
+# generate HTML output.\r
+\r
+GENERATE_HTML = YES\r
+\r
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. \r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
+# put in front of it. If left blank `html' will be used as the default path.\r
+\r
+HTML_OUTPUT = html\r
+\r
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for \r
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank \r
+# doxygen will generate files with .html extension.\r
+\r
+HTML_FILE_EXTENSION = .html\r
+\r
+# The HTML_HEADER tag can be used to specify a personal HTML header for \r
+# each generated HTML page. If it is left blank doxygen will generate a \r
+# standard header.\r
+\r
+HTML_HEADER = \r
+\r
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for \r
+# each generated HTML page. If it is left blank doxygen will generate a \r
+# standard footer.\r
+\r
+HTML_FOOTER = \r
+\r
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading \r
+# style sheet that is used by each HTML page. It can be used to \r
+# fine-tune the look of the HTML output. If the tag is left blank doxygen \r
+# will generate a default style sheet. Note that doxygen will try to copy \r
+# the style sheet file to the HTML output directory, so don't put your own \r
+# stylesheet in the HTML output directory as well, or it will be erased!\r
+\r
+HTML_STYLESHEET = \r
+\r
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, \r
+# files or namespaces will be aligned in HTML using tables. If set to \r
+# NO a bullet list will be used.\r
+\r
+HTML_ALIGN_MEMBERS = YES\r
+\r
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML \r
+# documentation will contain sections that can be hidden and shown after the \r
+# page has loaded. For this to work a browser that supports \r
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox \r
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).\r
+\r
+HTML_DYNAMIC_SECTIONS = YES\r
+\r
+# If the GENERATE_DOCSET tag is set to YES, additional index files \r
+# will be generated that can be used as input for Apple's Xcode 3 \r
+# integrated development environment, introduced with OSX 10.5 (Leopard). \r
+# To create a documentation set, doxygen will generate a Makefile in the \r
+# HTML output directory. Running make will produce the docset in that \r
+# directory and running "make install" will install the docset in \r
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find \r
+# it at startup. \r
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.\r
+\r
+GENERATE_DOCSET = NO\r
+\r
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the \r
+# feed. A documentation feed provides an umbrella under which multiple \r
+# documentation sets from a single provider (such as a company or product suite) \r
+# can be grouped.\r
+\r
+DOCSET_FEEDNAME = "Doxygen generated docs"\r
+\r
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that \r
+# should uniquely identify the documentation set bundle. This should be a \r
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen \r
+# will append .docset to the name.\r
+\r
+DOCSET_BUNDLE_ID = org.doxygen.Project\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files \r
+# will be generated that can be used as input for tools like the \r
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) \r
+# of the generated HTML documentation.\r
+\r
+GENERATE_HTMLHELP = NO\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can \r
+# be used to specify the file name of the resulting .chm file. You \r
+# can add a path in front of the file if the result should not be \r
+# written to the html output directory.\r
+\r
+CHM_FILE = \r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can \r
+# be used to specify the location (absolute path including file name) of \r
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run \r
+# the HTML help compiler on the generated index.hhp.\r
+\r
+HHC_LOCATION = \r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag \r
+# controls if a separate .chi index file is generated (YES) or that \r
+# it should be included in the master .chm file (NO).\r
+\r
+GENERATE_CHI = NO\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING\r
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file\r
+# content.\r
+\r
+CHM_INDEX_ENCODING = \r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag \r
+# controls whether a binary table of contents is generated (YES) or a \r
+# normal table of contents (NO) in the .chm file.\r
+\r
+BINARY_TOC = NO\r
+\r
+# The TOC_EXPAND flag can be set to YES to add extra items for group members \r
+# to the contents of the HTML help documentation and to the tree view.\r
+\r
+TOC_EXPAND = YES\r
+\r
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER \r
+# are set, an additional index file will be generated that can be used as input for \r
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated \r
+# HTML documentation.\r
+\r
+GENERATE_QHP = NO\r
+\r
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can \r
+# be used to specify the file name of the resulting .qch file. \r
+# The path specified is relative to the HTML output folder.\r
+\r
+QCH_FILE = \r
+\r
+# The QHP_NAMESPACE tag specifies the namespace to use when generating \r
+# Qt Help Project output. For more information please see \r
+# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>.\r
+\r
+QHP_NAMESPACE = org.doxygen.Project\r
+\r
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating \r
+# Qt Help Project output. For more information please see \r
+# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>.\r
+\r
+QHP_VIRTUAL_FOLDER = doc\r
+\r
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can \r
+# be used to specify the location of Qt's qhelpgenerator. \r
+# If non-empty doxygen will try to run qhelpgenerator on the generated \r
+# .qhp file .\r
+\r
+QHG_LOCATION = \r
+\r
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at \r
+# top of each HTML page. The value NO (the default) enables the index and \r
+# the value YES disables it.\r
+\r
+DISABLE_INDEX = NO\r
+\r
+# This tag can be used to set the number of enum values (range [1..20]) \r
+# that doxygen will group on one line in the generated HTML documentation.\r
+\r
+ENUM_VALUES_PER_LINE = 1\r
+\r
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index\r
+# structure should be generated to display hierarchical information.\r
+# If the tag value is set to FRAME, a side panel will be generated\r
+# containing a tree-like index structure (just like the one that \r
+# is generated for HTML Help). For this to work a browser that supports \r
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, \r
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are \r
+# probably better off using the HTML help feature. Other possible values \r
+# for this tag are: HIERARCHIES, which will generate the Groups, Directories,\r
+# and Class Hierarchy pages using a tree view instead of an ordered list;\r
+# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which\r
+# disables this behavior completely. For backwards compatibility with previous\r
+# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE\r
+# respectively.\r
+\r
+GENERATE_TREEVIEW = YES\r
+\r
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be \r
+# used to set the initial width (in pixels) of the frame in which the tree \r
+# is shown.\r
+\r
+TREEVIEW_WIDTH = 250\r
+\r
+# Use this tag to change the font size of Latex formulas included \r
+# as images in the HTML documentation. The default is 10. Note that \r
+# when you change the font size after a successful doxygen run you need \r
+# to manually remove any form_*.png images from the HTML output directory \r
+# to force them to be regenerated.\r
+\r
+FORMULA_FONTSIZE = 10\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the LaTeX output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will \r
+# generate Latex output.\r
+\r
+GENERATE_LATEX = NO\r
+\r
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. \r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
+# put in front of it. If left blank `latex' will be used as the default path.\r
+\r
+LATEX_OUTPUT = latex\r
+\r
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be \r
+# invoked. If left blank `latex' will be used as the default command name.\r
+\r
+LATEX_CMD_NAME = latex\r
+\r
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to \r
+# generate index for LaTeX. If left blank `makeindex' will be used as the \r
+# default command name.\r
+\r
+MAKEINDEX_CMD_NAME = makeindex\r
+\r
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact \r
+# LaTeX documents. This may be useful for small projects and may help to \r
+# save some trees in general.\r
+\r
+COMPACT_LATEX = NO\r
+\r
+# The PAPER_TYPE tag can be used to set the paper type that is used \r
+# by the printer. Possible values are: a4, a4wide, letter, legal and \r
+# executive. If left blank a4wide will be used.\r
+\r
+PAPER_TYPE = a4wide\r
+\r
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX \r
+# packages that should be included in the LaTeX output.\r
+\r
+EXTRA_PACKAGES = \r
+\r
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for \r
+# the generated latex document. The header should contain everything until \r
+# the first chapter. If it is left blank doxygen will generate a \r
+# standard header. Notice: only use this tag if you know what you are doing!\r
+\r
+LATEX_HEADER = \r
+\r
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated \r
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will \r
+# contain links (just like the HTML output) instead of page references \r
+# This makes the output suitable for online browsing using a pdf viewer.\r
+\r
+PDF_HYPERLINKS = YES\r
+\r
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of \r
+# plain latex in the generated Makefile. Set this option to YES to get a \r
+# higher quality PDF documentation.\r
+\r
+USE_PDFLATEX = YES\r
+\r
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. \r
+# command to the generated LaTeX files. This will instruct LaTeX to keep \r
+# running if errors occur, instead of asking the user for help. \r
+# This option is also used when generating formulas in HTML.\r
+\r
+LATEX_BATCHMODE = NO\r
+\r
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not \r
+# include the index chapters (such as File Index, Compound Index, etc.) \r
+# in the output.\r
+\r
+LATEX_HIDE_INDICES = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the RTF output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output \r
+# The RTF output is optimized for Word 97 and may not look very pretty with \r
+# other RTF readers or editors.\r
+\r
+GENERATE_RTF = NO\r
+\r
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. \r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
+# put in front of it. If left blank `rtf' will be used as the default path.\r
+\r
+RTF_OUTPUT = rtf\r
+\r
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact \r
+# RTF documents. This may be useful for small projects and may help to \r
+# save some trees in general.\r
+\r
+COMPACT_RTF = NO\r
+\r
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated \r
+# will contain hyperlink fields. The RTF file will \r
+# contain links (just like the HTML output) instead of page references. \r
+# This makes the output suitable for online browsing using WORD or other \r
+# programs which support those fields. \r
+# Note: wordpad (write) and others do not support links.\r
+\r
+RTF_HYPERLINKS = NO\r
+\r
+# Load stylesheet definitions from file. Syntax is similar to doxygen's \r
+# config file, i.e. a series of assignments. You only have to provide \r
+# replacements, missing definitions are set to their default value.\r
+\r
+RTF_STYLESHEET_FILE = \r
+\r
+# Set optional variables used in the generation of an rtf document. \r
+# Syntax is similar to doxygen's config file.\r
+\r
+RTF_EXTENSIONS_FILE = \r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the man page output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will \r
+# generate man pages\r
+\r
+GENERATE_MAN = NO\r
+\r
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. \r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
+# put in front of it. If left blank `man' will be used as the default path.\r
+\r
+MAN_OUTPUT = man\r
+\r
+# The MAN_EXTENSION tag determines the extension that is added to \r
+# the generated man pages (default is the subroutine's section .3)\r
+\r
+MAN_EXTENSION = .3\r
+\r
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output, \r
+# then it will generate one additional man file for each entity \r
+# documented in the real man page(s). These additional files \r
+# only source the real man page, but without them the man command \r
+# would be unable to find the correct page. The default is NO.\r
+\r
+MAN_LINKS = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the XML output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_XML tag is set to YES Doxygen will \r
+# generate an XML file that captures the structure of \r
+# the code including all documentation.\r
+\r
+GENERATE_XML = NO\r
+\r
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. \r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be \r
+# put in front of it. If left blank `xml' will be used as the default path.\r
+\r
+XML_OUTPUT = xml\r
+\r
+# The XML_SCHEMA tag can be used to specify an XML schema, \r
+# which can be used by a validating XML parser to check the \r
+# syntax of the XML files.\r
+\r
+XML_SCHEMA = \r
+\r
+# The XML_DTD tag can be used to specify an XML DTD, \r
+# which can be used by a validating XML parser to check the \r
+# syntax of the XML files.\r
+\r
+XML_DTD = \r
+\r
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will \r
+# dump the program listings (including syntax highlighting \r
+# and cross-referencing information) to the XML output. Note that \r
+# enabling this will significantly increase the size of the XML output.\r
+\r
+XML_PROGRAMLISTING = YES\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options for the AutoGen Definitions output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will \r
+# generate an AutoGen Definitions (see autogen.sf.net) file \r
+# that captures the structure of the code including all \r
+# documentation. Note that this feature is still experimental \r
+# and incomplete at the moment.\r
+\r
+GENERATE_AUTOGEN_DEF = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the Perl module output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will \r
+# generate a Perl module file that captures the structure of \r
+# the code including all documentation. Note that this \r
+# feature is still experimental and incomplete at the \r
+# moment.\r
+\r
+GENERATE_PERLMOD = NO\r
+\r
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate \r
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able \r
+# to generate PDF and DVI output from the Perl module output.\r
+\r
+PERLMOD_LATEX = NO\r
+\r
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be \r
+# nicely formatted so it can be parsed by a human reader. This is useful \r
+# if you want to understand what is going on. On the other hand, if this \r
+# tag is set to NO the size of the Perl module output will be much smaller \r
+# and Perl will parse it just the same.\r
+\r
+PERLMOD_PRETTY = YES\r
+\r
+# The names of the make variables in the generated doxyrules.make file \r
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. \r
+# This is useful so different doxyrules.make files included by the same \r
+# Makefile don't overwrite each other's variables.\r
+\r
+PERLMOD_MAKEVAR_PREFIX = \r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration options related to the preprocessor \r
+#---------------------------------------------------------------------------\r
+\r
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will \r
+# evaluate all C-preprocessor directives found in the sources and include \r
+# files.\r
+\r
+ENABLE_PREPROCESSING = YES\r
+\r
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro \r
+# names in the source code. If set to NO (the default) only conditional \r
+# compilation will be performed. Macro expansion can be done in a controlled \r
+# way by setting EXPAND_ONLY_PREDEF to YES.\r
+\r
+MACRO_EXPANSION = YES\r
+\r
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES \r
+# then the macro expansion is limited to the macros specified with the \r
+# PREDEFINED and EXPAND_AS_DEFINED tags.\r
+\r
+EXPAND_ONLY_PREDEF = YES\r
+\r
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files \r
+# in the INCLUDE_PATH (see below) will be search if a #include is found.\r
+\r
+SEARCH_INCLUDES = YES\r
+\r
+# The INCLUDE_PATH tag can be used to specify one or more directories that \r
+# contain include files that are not input files but should be processed by \r
+# the preprocessor.\r
+\r
+INCLUDE_PATH = \r
+\r
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard \r
+# patterns (like *.h and *.hpp) to filter out the header-files in the \r
+# directories. If left blank, the patterns specified with FILE_PATTERNS will \r
+# be used.\r
+\r
+INCLUDE_FILE_PATTERNS = \r
+\r
+# The PREDEFINED tag can be used to specify one or more macro names that \r
+# are defined before the preprocessor is started (similar to the -D option of \r
+# gcc). The argument of the tag is a list of macros of the form: name \r
+# or name=definition (no spaces). If the definition and the = are \r
+# omitted =1 is assumed. To prevent a macro definition from being \r
+# undefined via #undef or recursively expanded use the := operator \r
+# instead of the = operator.\r
+\r
+PREDEFINED = __DOXYGEN__\r
+\r
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then \r
+# this tag can be used to specify a list of macro names that should be expanded. \r
+# The macro definition that is found in the sources will be used. \r
+# Use the PREDEFINED tag if you want to use a different macro definition.\r
+\r
+EXPAND_AS_DEFINED = BUTTLOADTAG\r
+\r
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then \r
+# doxygen's preprocessor will remove all function-like macros that are alone \r
+# on a line, have an all uppercase name, and do not end with a semicolon. Such \r
+# function macros are typically used for boiler-plate code, and will confuse \r
+# the parser if not removed.\r
+\r
+SKIP_FUNCTION_MACROS = YES\r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration::additions related to external references \r
+#---------------------------------------------------------------------------\r
+\r
+# The TAGFILES option can be used to specify one or more tagfiles. \r
+# Optionally an initial location of the external documentation \r
+# can be added for each tagfile. The format of a tag file without \r
+# this location is as follows: \r
+# TAGFILES = file1 file2 ... \r
+# Adding location for the tag files is done as follows: \r
+# TAGFILES = file1=loc1 "file2 = loc2" ... \r
+# where "loc1" and "loc2" can be relative or absolute paths or \r
+# URLs. If a location is present for each tag, the installdox tool \r
+# does not have to be run to correct the links.\r
+# Note that each tag file must have a unique name\r
+# (where the name does NOT include the path)\r
+# If a tag file is not located in the directory in which doxygen \r
+# is run, you must also specify the path to the tagfile here.\r
+\r
+TAGFILES = \r
+\r
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create \r
+# a tag file that is based on the input files it reads.\r
+\r
+GENERATE_TAGFILE = \r
+\r
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed \r
+# in the class index. If set to NO only the inherited external classes \r
+# will be listed.\r
+\r
+ALLEXTERNALS = NO\r
+\r
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed \r
+# in the modules index. If set to NO, only the current project's groups will \r
+# be listed.\r
+\r
+EXTERNAL_GROUPS = YES\r
+\r
+# The PERL_PATH should be the absolute path and name of the perl script \r
+# interpreter (i.e. the result of `which perl').\r
+\r
+PERL_PATH = /usr/bin/perl\r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration options related to the dot tool \r
+#---------------------------------------------------------------------------\r
+\r
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will \r
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base \r
+# or super classes. Setting the tag to NO turns the diagrams off. Note that \r
+# this option is superseded by the HAVE_DOT option below. This is only a \r
+# fallback. It is recommended to install and use dot, since it yields more \r
+# powerful graphs.\r
+\r
+CLASS_DIAGRAMS = NO\r
+\r
+# You can define message sequence charts within doxygen comments using the \msc \r
+# command. Doxygen will then run the mscgen tool (see \r
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the \r
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where \r
+# the mscgen tool resides. If left empty the tool is assumed to be found in the \r
+# default search path.\r
+\r
+MSCGEN_PATH = \r
+\r
+# If set to YES, the inheritance and collaboration graphs will hide \r
+# inheritance and usage relations if the target is undocumented \r
+# or is not a class.\r
+\r
+HIDE_UNDOC_RELATIONS = YES\r
+\r
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is \r
+# available from the path. This tool is part of Graphviz, a graph visualization \r
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section \r
+# have no effect if this option is set to NO (the default)\r
+\r
+HAVE_DOT = NO\r
+\r
+# By default doxygen will write a font called FreeSans.ttf to the output \r
+# directory and reference it in all dot files that doxygen generates. This \r
+# font does not include all possible unicode characters however, so when you need \r
+# these (or just want a differently looking font) you can specify the font name \r
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font, \r
+# which can be done by putting it in a standard location or by setting the \r
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory \r
+# containing the font.\r
+\r
+DOT_FONTNAME = FreeSans\r
+\r
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. \r
+# The default size is 10pt.\r
+\r
+DOT_FONTSIZE = 10\r
+\r
+# By default doxygen will tell dot to use the output directory to look for the \r
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a \r
+# different font using DOT_FONTNAME you can set the path where dot \r
+# can find it using this tag.\r
+\r
+DOT_FONTPATH = \r
+\r
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen \r
+# will generate a graph for each documented class showing the direct and \r
+# indirect inheritance relations. Setting this tag to YES will force the \r
+# the CLASS_DIAGRAMS tag to NO.\r
+\r
+CLASS_GRAPH = NO\r
+\r
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen \r
+# will generate a graph for each documented class showing the direct and \r
+# indirect implementation dependencies (inheritance, containment, and \r
+# class references variables) of the class with other documented classes.\r
+\r
+COLLABORATION_GRAPH = NO\r
+\r
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen \r
+# will generate a graph for groups, showing the direct groups dependencies\r
+\r
+GROUP_GRAPHS = NO\r
+\r
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and \r
+# collaboration diagrams in a style similar to the OMG's Unified Modeling \r
+# Language.\r
+\r
+UML_LOOK = NO\r
+\r
+# If set to YES, the inheritance and collaboration graphs will show the \r
+# relations between templates and their instances.\r
+\r
+TEMPLATE_RELATIONS = NO\r
+\r
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT \r
+# tags are set to YES then doxygen will generate a graph for each documented \r
+# file showing the direct and indirect include dependencies of the file with \r
+# other documented files.\r
+\r
+INCLUDE_GRAPH = NO\r
+\r
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and \r
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each \r
+# documented header file showing the documented files that directly or \r
+# indirectly include this file.\r
+\r
+INCLUDED_BY_GRAPH = NO\r
+\r
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then \r
+# doxygen will generate a call dependency graph for every global function \r
+# or class method. Note that enabling this option will significantly increase \r
+# the time of a run. So in most cases it will be better to enable call graphs \r
+# for selected functions only using the \callgraph command.\r
+\r
+CALL_GRAPH = NO\r
+\r
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then \r
+# doxygen will generate a caller dependency graph for every global function \r
+# or class method. Note that enabling this option will significantly increase \r
+# the time of a run. So in most cases it will be better to enable caller \r
+# graphs for selected functions only using the \callergraph command.\r
+\r
+CALLER_GRAPH = NO\r
+\r
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen \r
+# will graphical hierarchy of all classes instead of a textual one.\r
+\r
+GRAPHICAL_HIERARCHY = NO\r
+\r
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES \r
+# then doxygen will show the dependencies a directory has on other directories \r
+# in a graphical way. The dependency relations are determined by the #include\r
+# relations between the files in the directories.\r
+\r
+DIRECTORY_GRAPH = NO\r
+\r
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images \r
+# generated by dot. Possible values are png, jpg, or gif\r
+# If left blank png will be used.\r
+\r
+DOT_IMAGE_FORMAT = png\r
+\r
+# The tag DOT_PATH can be used to specify the path where the dot tool can be \r
+# found. If left blank, it is assumed the dot tool can be found in the path.\r
+\r
+DOT_PATH = "C:/Program Files/Graphviz2.18/bin"\r
+\r
+# The DOTFILE_DIRS tag can be used to specify one or more directories that \r
+# contain dot files that are included in the documentation (see the \r
+# \dotfile command).\r
+\r
+DOTFILE_DIRS = \r
+\r
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of \r
+# nodes that will be shown in the graph. If the number of nodes in a graph \r
+# becomes larger than this value, doxygen will truncate the graph, which is \r
+# visualized by representing a node as a red box. Note that doxygen if the \r
+# number of direct children of the root node in a graph is already larger than \r
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note \r
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.\r
+\r
+DOT_GRAPH_MAX_NODES = 15\r
+\r
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the \r
+# graphs generated by dot. A depth value of 3 means that only nodes reachable \r
+# from the root by following a path via at most 3 edges will be shown. Nodes \r
+# that lay further from the root node will be omitted. Note that setting this \r
+# option to 1 or 2 may greatly reduce the computation time needed for large \r
+# code bases. Also note that the size of a graph can be further restricted by \r
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.\r
+\r
+MAX_DOT_GRAPH_DEPTH = 2\r
+\r
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent \r
+# background. This is disabled by default, because dot on Windows does not \r
+# seem to support this out of the box. Warning: Depending on the platform used, \r
+# enabling this option may lead to badly anti-aliased labels on the edges of \r
+# a graph (i.e. they become hard to read).\r
+\r
+DOT_TRANSPARENT = YES\r
+\r
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output \r
+# files in one run (i.e. multiple -o and -T options on the command line). This \r
+# makes dot run faster, but since only newer versions of dot (>1.8.10) \r
+# support this, this feature is disabled by default.\r
+\r
+DOT_MULTI_TARGETS = NO\r
+\r
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will \r
+# generate a legend page explaining the meaning of the various boxes and \r
+# arrows in the dot generated graphs.\r
+\r
+GENERATE_LEGEND = YES\r
+\r
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will \r
+# remove the intermediate dot files that are used to generate \r
+# the various graphs.\r
+\r
+DOT_CLEANUP = YES\r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration::additions related to the search engine \r
+#---------------------------------------------------------------------------\r
+\r
+# The SEARCHENGINE tag specifies whether or not a search engine should be \r
+# used. If set to NO the values of all tags below this one will be ignored.\r
+\r
+SEARCHENGINE = NO\r
projects / pub / USBasp.git / commitdiff