Rename new CDC class bootloader NO_LOCK_BYTE_SUPPORT compile time option to NO_LOCK_B...

Clean up CDC bootloader command processing code.

diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c
index 12a7557..74dd5d2 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.c
+++ b/Bootloaders/CDC/BootloaderCDC.c
@@ -332,223 +332,230 @@ void CDC_Task(void)
        Endpoint_SelectEndpoint(CDC_RX_EPNUM);
 
        /* Check if endpoint has a command in it sent from the host */
-       if (Endpoint_IsOUTReceived())
-       {
-               /* Read in the bootloader command (first byte sent from host) */
-               uint8_t Command = FetchNextCommandByte();
+       if (!(Endpoint_IsOUTReceived()))
+         return;
 
-               if ((Command == 'L') || (Command == 'P') || (Command == 'T') || (Command == 'E'))
-               {
-                       if (Command == 'E')
-                         RunBootloader = false;
-                       else if (Command == 'T')
-                         FetchNextCommandByte();
+       /* Read in the bootloader command (first byte sent from host) */
+       uint8_t Command = FetchNextCommandByte();
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               else if (Command == 't')
-               {
-                       /* Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader */
-                       WriteNextResponseByte(0x44);
-                       WriteNextResponseByte(0x00);
-               }
-               else if (Command == 'a')
-               {
-                       /* Indicate auto-address increment is supported */
-                       WriteNextResponseByte('Y');
-               }
-               else if (Command == 'A')
-               {
-                       /* Set the current address to that given by the host */
-                       CurrAddress   = (FetchNextCommandByte() << 9);
-                       CurrAddress  |= (FetchNextCommandByte() << 1);
+       if (Command == 'E')
+       {
+               RunBootloader = false;
+       
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 'T')
+       {
+               FetchNextCommandByte();
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               else if (Command == 'p')
-               {
-                       /* Indicate serial programmer back to the host */
-                       WriteNextResponseByte('S');
-               }
-               else if (Command == 'S')
-               {
-                       /* Write the 7-byte software identifier to the endpoint */
-                       for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++)
-                         WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]);
-               }
-               else if (Command == 'V')
-               {
-                       WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR);
-                       WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR);
-               }
-               else if (Command == 's')
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if ((Command == 'L') || (Command == 'P'))
+       {
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 't')
+       {
+               /* Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader */
+               WriteNextResponseByte(0x44);
+               WriteNextResponseByte(0x00);
+       }
+       else if (Command == 'a')
+       {
+               /* Indicate auto-address increment is supported */
+               WriteNextResponseByte('Y');
+       }
+       else if (Command == 'A')
+       {
+               /* Set the current address to that given by the host */
+               CurrAddress   = (FetchNextCommandByte() << 9);
+               CurrAddress  |= (FetchNextCommandByte() << 1);
+
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 'p')
+       {
+               /* Indicate serial programmer back to the host */
+               WriteNextResponseByte('S');
+       }
+       else if (Command == 'S')
+       {
+               /* Write the 7-byte software identifier to the endpoint */
+               for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++)
+                 WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]);
+       }
+       else if (Command == 'V')
+       {
+               WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR);
+               WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR);
+       }
+       else if (Command == 's')
+       {
+               WriteNextResponseByte(AVR_SIGNATURE_3);
+               WriteNextResponseByte(AVR_SIGNATURE_2);
+               WriteNextResponseByte(AVR_SIGNATURE_1);
+       }
+       else if (Command == 'e')
+       {
+               /* Clear the application section of flash */
+               for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < BOOT_START_ADDR; CurrFlashAddress += SPM_PAGESIZE)
                {
-                       WriteNextResponseByte(AVR_SIGNATURE_3);
-                       WriteNextResponseByte(AVR_SIGNATURE_2);
-                       WriteNextResponseByte(AVR_SIGNATURE_1);
+                       boot_page_erase(CurrFlashAddress);
+                       boot_spm_busy_wait();
+                       boot_page_write(CurrFlashAddress);
+                       boot_spm_busy_wait();
                }
-               else if (Command == 'e')
-               {
-                       /* Clear the application section of flash */
-                       for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < BOOT_START_ADDR; CurrFlashAddress++)
-                       {
-                               boot_page_erase(CurrFlashAddress);
-                               boot_spm_busy_wait();
-                               boot_page_write(CurrFlashAddress);
-                               boot_spm_busy_wait();
-
-                               CurrFlashAddress += SPM_PAGESIZE;
-                       }
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               #if !defined(NO_LOCK_BYTE_SUPPORT)
-               else if (Command == 'l')
-               {
-                       /* Set the lock bits to those given by the host */
-                       boot_lock_bits_set(FetchNextCommandByte());
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       #if !defined(NO_LOCK_BYTE_WRITE_SUPPORT)
+       else if (Command == 'l')
+       {
+               /* Set the lock bits to those given by the host */
+               boot_lock_bits_set(FetchNextCommandByte());
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               #endif
-               else if (Command == 'r')
-               {
-                       WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS));
-               }
-               else if (Command == 'F')
-               {
-                       WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS));
-               }
-               else if (Command == 'N')
-               {
-                       WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS));
-               }
-               else if (Command == 'Q')
-               {
-                       WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS));
-               }
-               #if !defined(NO_BLOCK_SUPPORT)
-               else if (Command == 'b')
-               {
-                       WriteNextResponseByte('Y');
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       #endif
+       else if (Command == 'r')
+       {
+               WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS));
+       }
+       else if (Command == 'F')
+       {
+               WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS));
+       }
+       else if (Command == 'N')
+       {
+               WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS));
+       }
+       else if (Command == 'Q')
+       {
+               WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS));
+       }
+       #if !defined(NO_BLOCK_SUPPORT)
+       else if (Command == 'b')
+       {
+               WriteNextResponseByte('Y');
 
-                       /* Send block size to the host */
-                       WriteNextResponseByte(SPM_PAGESIZE >> 8);
-                       WriteNextResponseByte(SPM_PAGESIZE & 0xFF);
-               }
-               else if ((Command == 'B') || (Command == 'g'))
-               {
-                       /* Delegate the block write/read to a separate function for clarity */
-                       ReadWriteMemoryBlock(Command);
-               }
-               #endif
-               #if !defined(NO_FLASH_BYTE_SUPPORT)
-               else if (Command == 'C')
-               {
-                       /* Write the high byte to the current flash page */
-                       boot_page_fill(CurrAddress, FetchNextCommandByte());
+               /* Send block size to the host */
+               WriteNextResponseByte(SPM_PAGESIZE >> 8);
+               WriteNextResponseByte(SPM_PAGESIZE & 0xFF);
+       }
+       else if ((Command == 'B') || (Command == 'g'))
+       {
+               /* Delegate the block write/read to a separate function for clarity */
+               ReadWriteMemoryBlock(Command);
+       }
+       #endif
+       #if !defined(NO_FLASH_BYTE_SUPPORT)
+       else if (Command == 'C')
+       {
+               /* Write the high byte to the current flash page */
+               boot_page_fill(CurrAddress, FetchNextCommandByte());
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               else if (Command == 'c')
-               {
-                       /* Write the low byte to the current flash page */
-                       boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte());
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 'c')
+       {
+               /* Write the low byte to the current flash page */
+               boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte());
 
-                       /* Increment the address */
-                       CurrAddress += 2;
+               /* Increment the address */
+               CurrAddress += 2;
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               else if (Command == 'm')
-               {
-                       /* Commit the flash page to memory */
-                       boot_page_write(CurrAddress);
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 'm')
+       {
+               /* Commit the flash page to memory */
+               boot_page_write(CurrAddress);
 
-                       /* Wait until write operation has completed */
-                       boot_spm_busy_wait();
+               /* Wait until write operation has completed */
+               boot_spm_busy_wait();
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               else if (Command == 'R')
-               {
-                       #if (FLASHEND > 0xFFFF)
-                       uint16_t ProgramWord = pgm_read_word_far(CurrAddress);
-                       #else
-                       uint16_t ProgramWord = pgm_read_word(CurrAddress);
-                       #endif
-
-                       WriteNextResponseByte(ProgramWord >> 8);
-                       WriteNextResponseByte(ProgramWord & 0xFF);
-               }
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 'R')
+       {
+               #if (FLASHEND > 0xFFFF)
+               uint16_t ProgramWord = pgm_read_word_far(CurrAddress);
+               #else
+               uint16_t ProgramWord = pgm_read_word(CurrAddress);
                #endif
-               #if !defined(NO_EEPROM_BYTE_SUPPORT)
-               else if (Command == 'D')
-               {
-                       /* Read the byte from the endpoint and write it to the EEPROM */
-                       eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
 
-                       /* Increment the address after use */
-                       CurrAddress += 2;
+               WriteNextResponseByte(ProgramWord >> 8);
+               WriteNextResponseByte(ProgramWord & 0xFF);
+       }
+       #endif
+       #if !defined(NO_EEPROM_BYTE_SUPPORT)
+       else if (Command == 'D')
+       {
+               /* Read the byte from the endpoint and write it to the EEPROM */
+               eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
 
-                       /* Send confirmation byte back to the host */
-                       WriteNextResponseByte('\r');
-               }
-               else if (Command == 'd')
-               {
-                       /* Read the EEPROM byte and write it to the endpoint */
-                       WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1))));
+               /* Increment the address after use */
+               CurrAddress += 2;
 
-                       /* Increment the address after use */
-                       CurrAddress += 2;
-               }
-               #endif
-               else if (Command != 27)
-               {
-                       /* Unknown (non-sync) command, return fail code */
-                       WriteNextResponseByte('?');
-               }
-
-               /* Select the IN endpoint */
-               Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+               /* Send confirmation byte back to the host */
+               WriteNextResponseByte('\r');
+       }
+       else if (Command == 'd')
+       {
+               /* Read the EEPROM byte and write it to the endpoint */
+               WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1))));
 
-               /* Remember if the endpoint is completely full before clearing it */
-               bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
+               /* Increment the address after use */
+               CurrAddress += 2;
+       }
+       #endif
+       else if (Command != 27)
+       {
+               /* Unknown (non-sync) command, return fail code */
+               WriteNextResponseByte('?');
+       }
 
-               /* Send the endpoint data to the host */
-               Endpoint_ClearIN();
+       /* Select the IN endpoint */
+       Endpoint_SelectEndpoint(CDC_TX_EPNUM);
 
-               /* If a full endpoint's worth of data was sent, we need to send an empty packet afterwards to signal end of transfer */
-               if (IsEndpointFull)
-               {
-                       while (!(Endpoint_IsINReady()))
-                       {
-                               if (USB_DeviceState == DEVICE_STATE_Unattached)
-                                 return;
-                       }
+       /* Remember if the endpoint is completely full before clearing it */
+       bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
 
-                       Endpoint_ClearIN();
-               }
+       /* Send the endpoint data to the host */
+       Endpoint_ClearIN();
 
-               /* Wait until the data has been sent to the host */
+       /* If a full endpoint's worth of data was sent, we need to send an empty packet afterwards to signal end of transfer */
+       if (IsEndpointFull)
+       {
                while (!(Endpoint_IsINReady()))
                {
                        if (USB_DeviceState == DEVICE_STATE_Unattached)
                          return;
                }
 
-               /* Select the OUT endpoint */
-               Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+               Endpoint_ClearIN();
+       }
 
-               /* Acknowledge the command from the host */
-               Endpoint_ClearOUT();
+       /* Wait until the data has been sent to the host */
+       while (!(Endpoint_IsINReady()))
+       {
+               if (USB_DeviceState == DEVICE_STATE_Unattached)
+                 return;
        }
+
+       /* Select the OUT endpoint */
+       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+
+       /* Acknowledge the command from the host */
+       Endpoint_ClearOUT();
 }
 

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index 69a269d..1eac72f 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -82,7 +82,7 @@
  *        to be made using the block-level commands.
  *   </tr>
  *   <tr>
- *    <td>NO_LOCK_BYTE_SUPPORT</td>
+ *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set progmatically.
  *   </tr>

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 5eebaba..c23782a 100644 (file)
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -127,7 +127,7 @@ LUFA_OPTS += -D NO_SOF_EVENTS
 #LUFA_OPTS += -D NO_BLOCK_SUPPORT
 #LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT
 #LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT
-#LUFA_OPTS += -D NO_LOCK_BYTE_SUPPORT
+#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT
 
 
 # Create the LUFA source path variables by including the LUFA root makefile

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index c671edd..7397efd 100644 (file)
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -30,9 +30,9 @@
   *  - Added default test tone generation mode to the Device mode AudioInput demos
   *  - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
   *    tasks for each driver is called
-  *  - Added standard keyboard HID report scancode defines (thanks to László Monda)
+  *  - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
   *  - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
-  *  - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_SUPPORT compile time options to the
+  *  - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
   *    CDC class bootloader
   *
   *  <b>Changed:</b>