Spell check source code, fix mistakes.

diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c
index 953ecf8..66d78b8 100644 (file)
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c
@@ -175,7 +175,7 @@ void EVENT_USB_Device_ControlRequest(void)
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations

- *  to indicate the size of the retreived data.
+ *  to indicate the size of the retrieved data.

  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.
  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.


@@ -243,7 +243,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t*
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations

- *  to indicate the size of the retreived data.
+ *  to indicate the size of the retrieved data.

  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.
  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.

diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
index 82f664a..1869ac9 100644 (file)
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
@@ -212,7 +212,7 @@ void EVENT_USB_Device_ControlRequest(void)
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations

- *  to indicate the size of the retreived data.
+ *  to indicate the size of the retrieved data.

  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.
  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.


@@ -280,7 +280,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t*
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
  *
  *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
  *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations

- *  to indicate the size of the retreived data.
+ *  to indicate the size of the retrieved data.

  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.
  *
  *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
  *        of the \c DataLength parameter.

diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
index 5102f10..027264a 100644 (file)
--- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
+++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
@@ -71,7 +71,7 @@ static uint16_t LastTransferLength = 0;
 static uint8_t NextResponseBuffer[64];
 
 /** Indicates the length of the next response to send */
 static uint8_t NextResponseBuffer[64];
 
 /** Indicates the length of the next response to send */

-static uint8_t NextReponseLen;
+static uint8_t NextResponseLen;

 
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
 
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.


@@ -326,16 +326,16 @@ void ProcessSentMessage(uint8_t* const Data, const uint8_t Length)
        if (strncmp((char*)Data, "*IDN?", 5) == 0)
          strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
 
        if (strncmp((char*)Data, "*IDN?", 5) == 0)
          strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
 

-       NextReponseLen = strlen((char*)NextResponseBuffer);
+       NextResponseLen = strlen((char*)NextResponseBuffer);

 }
 
 uint8_t GetNextMessage(uint8_t* const Data)
 {
          strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
 
 }
 
 uint8_t GetNextMessage(uint8_t* const Data)
 {
          strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
 

-       NextReponseLen = strlen((char*)NextResponseBuffer);
+       NextResponseLen = strlen((char*)NextResponseBuffer);

 // ---
 // ---

-       uint8_t DataLen = MIN(NextReponseLen, 64);
+       uint8_t DataLen = MIN(NextResponseLen, 64);

 
        strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen);
 
 
        strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen);
 

diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
index a916659..f932a32 100644 (file)
--- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
+++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
@@ -181,7 +181,7 @@ void EVENT_USB_Device_ControlRequest(void)
 /** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
  *  LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
  *  endpoint, the processing code is placed here to avoid duplicating it and potentially having different
 /** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
  *  LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
  *  endpoint, the processing code is placed here to avoid duplicating it and potentially having different

- *  behaviour depending on the method used to sent it.
+ *  behavior depending on the method used to sent it.

  */
 void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
 {
  */
 void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
 {

diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c
index 472d19a..04a9454 100644 (file)
--- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c
+++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c
@@ -101,7 +101,7 @@ void SetupHardware(void)
 }
 
 /** Task to manage an enumerated USB MIDI device once connected, to display received
 }
 
 /** Task to manage an enumerated USB MIDI device once connected, to display received

- *  note events from the host and send note changes in response to tbe board's joystick.
+ *  note events from the host and send note changes in response to the board's joystick.

  */
 void JoystickHost_Task(void)
 {
  */
 void JoystickHost_Task(void)
 {

diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c
index 390acfa..e2887f5 100644 (file)
--- a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c
+++ b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c
@@ -283,7 +283,7 @@ static uint8_t MassStore_GetReturnedStatus(MS_CommandStatusWrapper_t* const SCSI
 
 /** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
  *  readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this
 
 /** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
  *  readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this

- *  command completes sucessfuly.
+ *  command completes successfully.

  *
  *  \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
  */
  *
  *  \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
  */

diff --git a/LUFA/Common/ArchitectureSpecific.h b/LUFA/Common/ArchitectureSpecific.h
index 1a05be8..9b719a2 100644 (file)
--- a/LUFA/Common/ArchitectureSpecific.h
+++ b/LUFA/Common/ArchitectureSpecific.h
@@ -66,7 +66,7 @@
                        #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__)
                                #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
                                        /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging
                        #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__)
                                #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
                                        /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging

-                                        *  interface after is has been disbled in software via \ref JTAG_DISABLE().
+                                        *  interface after is has been disabled in software via \ref JTAG_DISABLE().

                                         *
                                         *  \note This macro is not available for all architectures.
                                         */
                                         *
                                         *  \note This macro is not available for all architectures.
                                         */

diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h
index f4040b2..b058eed 100644 (file)
--- a/LUFA/Common/Attributes.h
+++ b/LUFA/Common/Attributes.h
@@ -116,7 +116,7 @@
 
                        /** Forces the compiler to not automatically zero the given global variable on startup, so that the
                         *  current RAM contents is retained. Under most conditions this value will be random due to the
 
                        /** Forces the compiler to not automatically zero the given global variable on startup, so that the
                         *  current RAM contents is retained. Under most conditions this value will be random due to the

-                        *  behaviour of volatile memory once power is removed, but may be used in some specific circumstances,
+                        *  behavior of volatile memory once power is removed, but may be used in some specific circumstances,

                         *  like the passing of values back after a system watchdog reset.
                         */
                        #define ATTR_NO_INIT                     __attribute__ ((section (".noinit")))
                         *  like the passing of values back after a system watchdog reset.
                         */
                        #define ATTR_NO_INIT                     __attribute__ ((section (".noinit")))

diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index 1b70a6b..73ccb41 100644 (file)
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -160,7 +160,7 @@
                 */
                static inline void Buttons_Init(void);
 
                 */
                static inline void Buttons_Init(void);
 

-               /** Disables the buttons driver, releasing the I/O pins back to their default high-impedence input mode. */
+               /** Disables the buttons driver, releasing the I/O pins back to their default high-impedance input mode. */

                static inline void Buttons_Disable(void);
 
                /** Returns a mask indicating which board buttons are currently pressed.
                static inline void Buttons_Disable(void);
 
                /** Returns a mask indicating which board buttons are currently pressed.

diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 63d28e8..2f90a9c 100644 (file)
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -126,7 +126,7 @@
                 */
                static inline void Joystick_Init(void);
 
                 */
                static inline void Joystick_Init(void);
 

-               /** Disables the joystick driver, releasing the I/O pins back to their default high-impedence input mode. */
+               /** Disables the joystick driver, releasing the I/O pins back to their default high-impedance input mode. */

                static inline void Joystick_Disable(void);
 
                /** Returns the current status of the joystick, as a mask indicating the direction the joystick is
                static inline void Joystick_Disable(void);
 
                /** Returns the current status of the joystick, as a mask indicating the direction the joystick is

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 97cb81a..21f89aa 100644 (file)
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -63,7 +63,7 @@
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.

- *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
+ *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D

  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)


@@ -221,7 +221,7 @@
                 */
                static inline void LEDs_Init(void);
 
                 */
                static inline void LEDs_Init(void);
 

-               /** Disables the board LED driver, releasing the I/O pins back to their default high-impedence input mode. */
+               /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */

                static inline void LEDs_Disable(void);
 
                /** Turns on the LEDs specified in the given LED mask.
                static inline void LEDs_Disable(void);
 
                /** Turns on the LEDs specified in the given LED mask.

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index c04d2ba..d85fddc 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -248,7 +248,7 @@
                                #define ADC_INT_TEMP_SENS           ((1 << 8) | (0x07 << MUX0))
                        #endif
 
                                #define ADC_INT_TEMP_SENS           ((1 << 8) | (0x07 << MUX0))
                        #endif
 

-                       /** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
+                       /** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */

                        #define ADC_1100MV_BANDGAP              (0x1E << MUX0)
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.
                        #define ADC_1100MV_BANDGAP              (0x1E << MUX0)
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.

diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h
index a8bfc78..52c5a1a 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h
+++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h
@@ -124,7 +124,7 @@
                         *
                         *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
                         *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
                         *
                         *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
                         *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations

-                        *  to indicate the size of the retreived data.
+                        *  to indicate the size of the retrieved data.

                         *
                         *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
                         *        of the \c DataLength parameter.
                         *
                         *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
                         *        of the \c DataLength parameter.


@@ -153,7 +153,7 @@
                         *
                         *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
                         *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
                         *
                         *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
                         *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations

-                        *  to indicate the size of the retreived data.
+                        *  to indicate the size of the retrieved data.

                         *
                         *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
                         *        of the \c DataLength parameter.
                         *
                         *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
                         *        of the \c DataLength parameter.

diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h
index 2703600..52aa9a1 100644 (file)
--- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h
+++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h
@@ -130,7 +130,7 @@
 
 
                        /** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the
 
 
                        /** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the

-                        *  \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events.
+                        *  \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events.

                         *
                         *  \param[in,out] MIDIInterfaceInfo  Pointer to a structure containing a MIDI Class configuration and state.
                         *
                         *
                         *  \param[in,out] MIDIInterfaceInfo  Pointer to a structure containing a MIDI Class configuration and state.
                         *

diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h
index 678feda..f55cd34 100644 (file)
--- a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h
+++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h
@@ -156,7 +156,7 @@
                         *\r
                         *  \param[in,out] AOAInterfaceInfo  Pointer to a structure containing an AOA Class host configuration and state.\r
                         *\r
                         *\r
                         *  \param[in,out] AOAInterfaceInfo  Pointer to a structure containing an AOA Class host configuration and state.\r
                         *\r

-                        *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occured..\r
+                        *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occurred..\r

                         */\r
                        uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
 \r
                         */\r
                        uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);\r
 \r


@@ -311,4 +311,4 @@
 \r
 /** @} */\r
 \r
 \r
 /** @} */\r
 \r

-
+\r

diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h
index 882cc31..21868d9 100644 (file)
--- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h
+++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h
@@ -246,7 +246,7 @@
                        uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 
                        /** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate
                        uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 
                        /** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate

-                        *  at which the device should send a report, when no state changes have ocurred; i.e. on HID keyboards, this sets the
+                        *  at which the device should send a report, when no state changes have occurred; i.e. on HID keyboards, this sets the

                         *  hardware key repeat interval.
                         *
                         *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
                         *  hardware key repeat interval.
                         *
                         *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.

diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h
index b9e8611..06ede7f 100644 (file)
--- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h
+++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h
@@ -145,7 +145,7 @@
                                                          MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
                        /** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the
                                                          MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
                        /** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the

-                        *  \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the
+                        *  \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the

                         *  pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI
                         *  events to be packed into a single pipe packet, increasing data throughput.
                         *
                         *  pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI
                         *  events to be packed into a single pipe packet, increasing data throughput.
                         *

diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
index 330dd98..8106988 100644 (file)
--- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
@@ -215,7 +215,7 @@
                         *                      from the \ref USB_Modes_t enum.
                         *
                         *  \param[in] Options  Mask indicating the options which should be used when initializing the USB
                         *                      from the \ref USB_Modes_t enum.
                         *
                         *  \param[in] Options  Mask indicating the options which should be used when initializing the USB

-                        *                      interface to control the USB interface's behaviour. This should be comprised of
+                        *                      interface to control the USB interface's behavior. This should be comprised of

                         *                      a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
                         *                      PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
                         *                      mode speed.
                         *                      a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
                         *                      PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
                         *                      mode speed.

diff --git a/LUFA/Drivers/USB/Core/ConfigDescriptor.h b/LUFA/Drivers/USB/Core/ConfigDescriptor.h
index 22e76cb..97fb39b 100644 (file)
--- a/LUFA/Drivers/USB/Core/ConfigDescriptor.h
+++ b/LUFA/Drivers/USB/Core/ConfigDescriptor.h
@@ -213,7 +213,7 @@
                         *  function. The routine updates the position and remaining configuration descriptor bytes values
                         *  automatically. If a comparator routine fails a search, the descriptor pointer is retreated back
                         *  so that the next descriptor search invocation will start from the descriptor which first caused the
                         *  function. The routine updates the position and remaining configuration descriptor bytes values
                         *  automatically. If a comparator routine fails a search, the descriptor pointer is retreated back
                         *  so that the next descriptor search invocation will start from the descriptor which first caused the

-                        *  original search to fail. This behaviour allows for one comparator to be used immediately after another
+                        *  original search to fail. This behavior allows for one comparator to be used immediately after another

                         *  has failed, starting the second search from the descriptor which failed the first.
                         *
                         *  Comparator functions should be standard functions which accept a pointer to the header of the current
                         *  has failed, starting the second search from the descriptor which failed the first.
                         *
                         *  Comparator functions should be standard functions which accept a pointer to the header of the current

diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h
index 8d627d4..f468b7e 100644 (file)
--- a/LUFA/Drivers/USB/Core/Events.h
+++ b/LUFA/Drivers/USB/Core/Events.h
@@ -189,7 +189,7 @@
                         *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by

                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n


@@ -207,7 +207,7 @@
                         *  \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *  \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by

                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n

diff --git a/LUFA/Drivers/USB/Core/HostStandardReq.h b/LUFA/Drivers/USB/Core/HostStandardReq.h
index 5bdfe45..6ad0d2e 100644 (file)
--- a/LUFA/Drivers/USB/Core/HostStandardReq.h
+++ b/LUFA/Drivers/USB/Core/HostStandardReq.h
@@ -91,7 +91,7 @@
 
                /* Global Variables: */
                        /** Indicates the currently set configuration number of the attached device. This indicates the currently
 
                /* Global Variables: */
                        /** Indicates the currently set configuration number of the attached device. This indicates the currently

-                        *  selected configuration value if one has been set sucessfully, or 0 if no configuration has been selected.
+                        *  selected configuration value if one has been set successfully, or 0 if no configuration has been selected.

                         *
                         *  To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function.
                         *
                         *
                         *  To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function.
                         *

diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h
index c46129c..031e01d 100644 (file)
--- a/LUFA/Drivers/USB/Core/StdDescriptors.h
+++ b/LUFA/Drivers/USB/Core/StdDescriptors.h
@@ -105,7 +105,7 @@
                        /** \name USB Configuration Descriptor Attribute Masks */
                        //@{
                        /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all
                        /** \name USB Configuration Descriptor Attribute Masks */
                        //@{
                        /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all

-                        *  devices for historial purposes.
+                        *  devices for historical purposes.

                         */
                        #define USB_CONFIG_ATTR_RESERVED          0x80
 
                         */
                        #define USB_CONFIG_ATTR_RESERVED          0x80
 

diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
index 92e245c..4a5d267 100644 (file)
--- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
@@ -172,7 +172,7 @@
                         *                      from the \ref USB_Modes_t enum.
                         *
                         *  \param[in] Options  Mask indicating the options which should be used when initializing the USB
                         *                      from the \ref USB_Modes_t enum.
                         *
                         *  \param[in] Options  Mask indicating the options which should be used when initializing the USB

-                        *                      interface to control the USB interface's behaviour. This should be comprised of
+                        *                      interface to control the USB interface's behavior. This should be comprised of

                         *                      a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
                         *                      PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
                         *                      mode speed.
                         *                      a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
                         *                      PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
                         *                      mode speed.

diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
index 25402e8..e1c782d 100644 (file)
--- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
+++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
@@ -180,7 +180,7 @@
                         *                      from the \ref USB_Modes_t enum.
                         *
                         *  \param[in] Options  Mask indicating the options which should be used when initializing the USB
                         *                      from the \ref USB_Modes_t enum.
                         *
                         *  \param[in] Options  Mask indicating the options which should be used when initializing the USB

-                        *                      interface to control the USB interface's behaviour. This should be comprised of
+                        *                      interface to control the USB interface's behavior. This should be comprised of

                         *                      a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
                         *                      PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
                         *                      mode speed.
                         *                      a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
                         *                      PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
                         *                      mode speed.

diff --git a/LUFA/Platform/Platform.h b/LUFA/Platform/Platform.h
index 3bbd697..db5f435 100644 (file)
--- a/LUFA/Platform/Platform.h
+++ b/LUFA/Platform/Platform.h
@@ -37,7 +37,7 @@
  *  management.
  *
  *  User code may choose to either include this master dispatch header file to include all available platform
  *  management.
  *
  *  User code may choose to either include this master dispatch header file to include all available platform

- *  driver header files for the current achitecture, or may choose to only include the specific platform driver
+ *  driver header files for the current architecture, or may choose to only include the specific platform driver

  *  modules required for a particular application.
  */
 
  *  modules required for a particular application.
  */
 


@@ -55,7 +55,7 @@
  *  system functions such as clock control and interrupt management.
  *
  *  User code may choose to either include this master dispatch header file to include all available platform
  *  system functions such as clock control and interrupt management.
  *
  *  User code may choose to either include this master dispatch header file to include all available platform

- *  driver header files for the current achitecture, or may choose to only include the specific platform driver
+ *  driver header files for the current architecture, or may choose to only include the specific platform driver

  *  modules required for a particular application.
  *
  *  \note The exact APIs and availability of sub-modules within the platform driver group may vary depending on the
  *  modules required for a particular application.
  *
  *  \note The exact APIs and availability of sub-modules within the platform driver group may vary depending on the

diff --git a/LUFA/Platform/UC3/ClockManagement.h b/LUFA/Platform/UC3/ClockManagement.h
index 2cd96d2..51cb0ff 100644 (file)
--- a/LUFA/Platform/UC3/ClockManagement.h
+++ b/LUFA/Platform/UC3/ClockManagement.h
@@ -91,16 +91,16 @@
                                EXOSC_MODE_8MHZ_OR_MORE  = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3, /**< External crystal oscillator equal to or faster than 8MHz. */
                        };
 
                                EXOSC_MODE_8MHZ_OR_MORE  = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3, /**< External crystal oscillator equal to or faster than 8MHz. */
                        };
 

-                       /** Enum for the possible external oscillator statup times. */
+                       /** Enum for the possible external oscillator startup times. */

                        enum UC3_Extern_OSC_ClockStartup_t
                        {
                                EXOSC_START_0CLK         = AVR32_PM_OSCCTRL0_STARTUP_0_RCOSC,     /**< Immediate startup, no delay. */
                        enum UC3_Extern_OSC_ClockStartup_t
                        {
                                EXOSC_START_0CLK         = AVR32_PM_OSCCTRL0_STARTUP_0_RCOSC,     /**< Immediate startup, no delay. */

-                               EXOSC_START_64CLK        = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC,    /**< Wait 64 clock cyles before startup for stability. */
-                               EXOSC_START_128CLK       = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC,   /**< Wait 128 clock cyles before startup for stability. */
-                               EXOSC_START_2048CLK      = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC,  /**< Wait 2048 clock cyles before startup for stability. */
-                               EXOSC_START_4096CLK      = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC,  /**< Wait 4096 clock cyles before startup for stability. */
-                               EXOSC_START_8192CLK      = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC,  /**< Wait 8192 clock cyles before startup for stability. */
-                               EXOSC_START_16384CLK     = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cyles before startup for stability. */
+                               EXOSC_START_64CLK        = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC,    /**< Wait 64 clock cycles before startup for stability. */
+                               EXOSC_START_128CLK       = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC,   /**< Wait 128 clock cycles before startup for stability. */
+                               EXOSC_START_2048CLK      = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC,  /**< Wait 2048 clock cycles before startup for stability. */
+                               EXOSC_START_4096CLK      = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC,  /**< Wait 4096 clock cycles before startup for stability. */
+                               EXOSC_START_8192CLK      = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC,  /**< Wait 8192 clock cycles before startup for stability. */
+                               EXOSC_START_16384CLK     = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cycles before startup for stability. */

                        };
 
                        /** Enum for the possible module clock sources. */
                        };
 
                        /** Enum for the possible module clock sources. */

diff --git a/LUFA/Platform/UC3/InterruptManagement.h b/LUFA/Platform/UC3/InterruptManagement.h
index 49bdaf8..7441a30 100644 (file)
--- a/LUFA/Platform/UC3/InterruptManagement.h
+++ b/LUFA/Platform/UC3/InterruptManagement.h
@@ -93,7 +93,7 @@
 
        /* Public Interface - May be used in end-application: */
                /* Macros: */
 
        /* Public Interface - May be used in end-application: */
                /* Macros: */

-                       /** Converts a given interrupt index into its assocated interrupt group.
+                       /** Converts a given interrupt index into its associated interrupt group.

                         *
                         *  \param[in] IRQIndex  Index of the interrupt request to convert.
                         *
                         *
                         *  \param[in] IRQIndex  Index of the interrupt request to convert.
                         *


@@ -101,7 +101,7 @@
                         */
                        #define INTC_IRQ_GROUP(IRQIndex)  (IRQIndex / 32)
 
                         */
                        #define INTC_IRQ_GROUP(IRQIndex)  (IRQIndex / 32)
 

-                       /** Converts a given interrupt index into its assocated interrupt line.
+                       /** Converts a given interrupt index into its associated interrupt line.

                         *
                         *  \param[in] IRQIndex  Index of the interrupt request to convert.
                         *
                         *
                         *  \param[in] IRQIndex  Index of the interrupt request to convert.
                         *

diff --git a/LUFA/Platform/XMEGA/ClockManagement.h b/LUFA/Platform/XMEGA/ClockManagement.h
index feef889..c0553ae 100644 (file)
--- a/LUFA/Platform/XMEGA/ClockManagement.h
+++ b/LUFA/Platform/XMEGA/ClockManagement.h
@@ -88,7 +88,7 @@
                                EXOSC_FREQ_16MHZ_MAX     = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */
                        };
 
                                EXOSC_FREQ_16MHZ_MAX     = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */
                        };
 

-                       /** Enum for the possible external oscillator statup times. */
+                       /** Enum for the possible external oscillator startup times. */

                        enum XMEGA_Extern_OSC_ClockStartup_t
                        {
                                EXOSC_START_6CLK         = OSC_XOSCSEL_EXTCLK_gc,      /**< Wait 6 clock cycles before startup (external clock). */
                        enum XMEGA_Extern_OSC_ClockStartup_t
                        {
                                EXOSC_START_6CLK         = OSC_XOSCSEL_EXTCLK_gc,      /**< Wait 6 clock cycles before startup (external clock). */


@@ -141,7 +141,7 @@
                         *  the oscillator is ready for use.
                         *
                         *  \param[in] FreqRange  Frequency range of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockFrequency_t.
                         *  the oscillator is ready for use.
                         *
                         *  \param[in] FreqRange  Frequency range of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockFrequency_t.

-                        *  \param[in] Startup    Statup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.
+                        *  \param[in] Startup    Startup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.

                         *
                         *  \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
                         */
                         *
                         *  \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
                         */


@@ -347,7 +347,7 @@
                         *
                         *  \param[in] Source      Clock source for the CPU core, a value from \ref XMEGA_System_ClockSource_t.
                         *
                         *
                         *  \param[in] Source      Clock source for the CPU core, a value from \ref XMEGA_System_ClockSource_t.
                         *

-                        *  \return Boolean \c true if the CPU core clock was sucessfully altered, \c false if invalid parameters specified.
+                        *  \return Boolean \c true if the CPU core clock was successfully altered, \c false if invalid parameters specified.

                         */
                        static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source) ATTR_ALWAYS_INLINE;
                        static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source)
                         */
                        static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source) ATTR_ALWAYS_INLINE;
                        static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source)

diff --git a/Projects/AVRISP-MKII/AVRISPDescriptors.c b/Projects/AVRISP-MKII/AVRISPDescriptors.c
index ab30c0e..9ad7c15 100644 (file)
--- a/Projects/AVRISP-MKII/AVRISPDescriptors.c
+++ b/Projects/AVRISP-MKII/AVRISPDescriptors.c
@@ -38,7 +38,7 @@
 #include "AVRISPDescriptors.h"
 
 #if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__)
 #include "AVRISPDescriptors.h"
 
 #if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__)

-       /** Indicates if an external reset has ocurred and the compatibility mode needs to be altered */
+       /** Indicates if an external reset has occurred and the compatibility mode needs to be altered */

        static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT;
 
        /** Current AVRISP data IN endpoint address. */
        static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT;
 
        /** Current AVRISP data IN endpoint address. */


@@ -255,7 +255,7 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue,
  */
 void CheckExternalReset(void)
 {      
  */
 void CheckExternalReset(void)
 {      

-       /* If an external reset occured, we need to change compatibility mode */
+       /* If an external reset occurred, we need to change compatibility mode */

        AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF));
 
        MCUSR = 0;
        AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF));
 
        MCUSR = 0;

diff --git a/Projects/Magstripe/Lib/CircularBitBuffer.h b/Projects/Magstripe/Lib/CircularBitBuffer.h
index 6a0dcd5..d037a66 100644 (file)
--- a/Projects/Magstripe/Lib/CircularBitBuffer.h
+++ b/Projects/Magstripe/Lib/CircularBitBuffer.h
@@ -71,7 +71,7 @@
                } BitBuffer_t;
 
        /* Function Prototypes: */
                } BitBuffer_t;
 
        /* Function Prototypes: */

-               /** Initialises or resets a given bit buffer, ready to store new bits.
+               /** Initializes or resets a given bit buffer, ready to store new bits.

                 *
                 *  \param[in,out] Buffer  Bit buffer to initialize
                 */
                 *
                 *  \param[in,out] Buffer  Bit buffer to initialize
                 */

diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h
index 177e26b..43e3444 100644 (file)
--- a/Projects/Magstripe/Lib/MagstripeHW.h
+++ b/Projects/Magstripe/Lib/MagstripeHW.h
@@ -77,7 +77,7 @@
 
        /* Public Interface - May be used in end-application: */
                /* Inline Functions: */
 
        /* Public Interface - May be used in end-application: */
                /* Inline Functions: */

-                       /** Initialises the magnetic stripe card reader ports and pins so that the card reader
+                       /** Initializes the magnetic stripe card reader ports and pins so that the card reader

                         *  device can be controlled and read by the card reader driver. This must be called before
                         *  trying to read any of the card reader's status lines.
                         */
                         *  device can be controlled and read by the card reader driver. This must be called before
                         *  trying to read any of the card reader's status lines.
                         */

diff --git a/Projects/SerialToLCD/Lib/HD44780.c b/Projects/SerialToLCD/Lib/HD44780.c
index 7bf989d..0ffe7c4 100644 (file)
--- a/Projects/SerialToLCD/Lib/HD44780.c
+++ b/Projects/SerialToLCD/Lib/HD44780.c
@@ -104,7 +104,7 @@ static void HD44780_PowerUp4Bit(void)
        _delay_us(50);
 }
 
        _delay_us(50);
 }
 

-void HD44780_Initialise(void)
+void HD44780_Initialize(void)

 {
        PORTD &= ~ALL_BITS;
        DDRD  |=  ALL_BITS;
 {
        PORTD &= ~ALL_BITS;
        DDRD  |=  ALL_BITS;

diff --git a/Projects/SerialToLCD/Lib/HD44780.h b/Projects/SerialToLCD/Lib/HD44780.h
index 680e69b..165e32a 100644 (file)
--- a/Projects/SerialToLCD/Lib/HD44780.h
+++ b/Projects/SerialToLCD/Lib/HD44780.h
@@ -57,7 +57,7 @@
                #define CMD_DISPLAY_ON      0x0C
 
        /* Function Prototypes: */
                #define CMD_DISPLAY_ON      0x0C
 
        /* Function Prototypes: */

-               void HD44780_Initialise(void);
+               void HD44780_Initialize(void);

                void HD44780_WriteData(const uint8_t c);
                void HD44780_WriteCommand(const uint8_t c);
 
                void HD44780_WriteData(const uint8_t c);
                void HD44780_WriteCommand(const uint8_t c);
 

diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c
index 952e2d4..b94c5a4 100644 (file)
--- a/Projects/SerialToLCD/SerialToLCD.c
+++ b/Projects/SerialToLCD/SerialToLCD.c
@@ -148,7 +148,7 @@ void SetupHardware(void)
        USB_Init();
 
        /* Power up the HD44780 Interface */
        USB_Init();
 
        /* Power up the HD44780 Interface */

-       HD44780_Initialise();
+       HD44780_Initialize();

        HD44780_WriteCommand(CMD_DISPLAY_ON);
        
        /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
        HD44780_WriteCommand(CMD_DISPLAY_ON);
        
        /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */

diff --git a/Projects/TempDataLogger/Lib/DataflashManager.h b/Projects/TempDataLogger/Lib/DataflashManager.h
index 9023626..784ede4 100644 (file)
--- a/Projects/TempDataLogger/Lib/DataflashManager.h
+++ b/Projects/TempDataLogger/Lib/DataflashManager.h
@@ -53,7 +53,7 @@
                #endif
 
        /* Defines: */
                #endif
 
        /* Defines: */

-               /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
+               /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */

                #define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
 
                /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
                #define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
 
                /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying

diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c
index 9ead42e..eb63bc6 100644 (file)
--- a/Projects/TempDataLogger/TempDataLogger.c
+++ b/Projects/TempDataLogger/TempDataLogger.c
@@ -227,7 +227,7 @@ void EVENT_USB_Device_Connect(void)
 {
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 
 {
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 

-       /* Close the log file so that the host has exclusive filesystem access */
+       /* Close the log file so that the host has exclusive file system access */

        CloseLogFile();
 }
 
        CloseLogFile();
 }
 

diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
index 7b4249c..58fac51 100644 (file)
--- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
+++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
@@ -157,7 +157,7 @@
             this.MaximizeBox = false;
             this.MinimizeBox = false;
             this.Name = "frmDataloggerSettings";
             this.MaximizeBox = false;
             this.MinimizeBox = false;
             this.Name = "frmDataloggerSettings";

-            this.Text = "DataLogger";
+            this.Text = "Datalogger";

             this.Load += new System.EventHandler(this.frmDataloggerSettings_Load);
             ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit();
             this.ResumeLayout(false);
             this.Load += new System.EventHandler(this.frmDataloggerSettings_Load);
             ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit();
             this.ResumeLayout(false);

diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
index 98e6006..01e9fb6 100644 (file)
--- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
+++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
@@ -85,7 +85,7 @@ namespace Project1HostApp
 
             if (ConnectionHandle == null)
             {
 
             if (ConnectionHandle == null)
             {

-                MessageBox.Show("Error: Cannot connect to DataLogger device.");
+                MessageBox.Show("Error: Cannot connect to Datalogger device.");

                 return;
             }
 
                 return;
             }
 


@@ -115,7 +115,7 @@ namespace Project1HostApp
 
             if (ConnectionHandle == null)
             {
 
             if (ConnectionHandle == null)
             {

-                MessageBox.Show("Error: Cannot connect to DataLogger device.");
+                MessageBox.Show("Error: Cannot connect to Datalogger device.");

                 return;
             }
 
                 return;
             }
 

diff --git a/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs b/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
index c6fd450..a4d0ab1 100644 (file)
--- a/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
+++ b/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
@@ -9,7 +9,7 @@ using System.Runtime.InteropServices;
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Dean Camera")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Dean Camera")]

-[assembly: AssemblyProduct("Temp DataLogger HostApp")]
+[assembly: AssemblyProduct("Temp Datalogger HostApp")]

 [assembly: AssemblyCopyright("Copyright © Dean Camera 2011")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 [assembly: AssemblyCopyright("Copyright © Dean Camera 2011")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]

diff --git a/Projects/Webserver/Lib/DataflashManager.h b/Projects/Webserver/Lib/DataflashManager.h
index af76f7f..95a0119 100644 (file)
--- a/Projects/Webserver/Lib/DataflashManager.h
+++ b/Projects/Webserver/Lib/DataflashManager.h
@@ -51,7 +51,7 @@
                #endif
 
        /* Defines: */
                #endif
 
        /* Defines: */

-               /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
+               /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */

                #define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
 
                /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
                #define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
 
                /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying

diff --git a/Projects/Webserver/Lib/uip/uip.c b/Projects/Webserver/Lib/uip/uip.c
index 94171ad..dccefdd 100644 (file)
--- a/Projects/Webserver/Lib/uip/uip.c
+++ b/Projects/Webserver/Lib/uip/uip.c
@@ -53,7 +53,7 @@
  * statement. While it would be possible to break the uip_process()
  * function into many smaller functions, this would increase the code
  * size because of the overhead of parameter passing and the fact that
  * statement. While it would be possible to break the uip_process()
  * function into many smaller functions, this would increase the code
  * size because of the overhead of parameter passing and the fact that

- * the optimiser would not be as efficient.
+ * the optimizer would not be as efficient.

  *
  * The principle is that we have a small buffer, called the uip_buf,
  * in which the device driver puts an incoming packet. The TCP/IP
  *
  * The principle is that we have a small buffer, called the uip_buf,
  * in which the device driver puts an incoming packet. The TCP/IP


@@ -330,7 +330,7 @@ upper_layer_chksum(u8_t proto)
   upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;
 #endif /* UIP_CONF_IPV6 */
 
   upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;
 #endif /* UIP_CONF_IPV6 */
 

-  /* First sum pseudoheader. */
+  /* First sum pseudo-header. */

 
   /* IP protocol and length fields. This addition cannot carry. */
   sum = upper_layer_len + proto;
 
   /* IP protocol and length fields. This addition cannot carry. */
   sum = upper_layer_len + proto;