Fix SoftUART.c not compiling due to accidental check in of changes not yet complete...

diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
index 0aaaa93..9b6f87a 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
@@ -81,19 +81,23 @@
                        #define ADC_REFERENCE_INT2560MV         ((1 << REFS1) | (1 << REFS0))
 
                        /** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
-                        *  ADC_GetResult() macro contain the 8 most significant bits of the result. */
+                        *  ADC_GetResult() macro contain the 8 most significant bits of the result.
+                        */
                        #define ADC_LEFT_ADJUSTED               (1 << ADLAR)
 
                        /** Right-adjusts the 10-bit ADC result, so that the lower 8 bits of the value returned by the
-                        *  ADC_GetResult() macro contain the 8 least significant bits of the result. */
+                        *  ADC_GetResult() macro contain the 8 least significant bits of the result.
+                        */
                        #define ADC_RIGHT_ADJUSTED              (0 << ADLAR)
 
                        /** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
-                        *  is capable of at the given input clock speed. */
+                        *  is capable of at the given input clock speed.
+                        */
                        #define ADC_FREE_RUNNING                (1 << ADATE)
 
                        /** Sets the ADC mode to single conversion, so that only a single conversion will take place before
-                        *  the ADC returns to idle. */
+                        *  the ADC returns to idle.
+                        */
                        #define ADC_SINGLE_CONVERSION           (0 << ADATE)
 
                        /** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */

diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c
index 00bb383..20f56e7 100644 (file)
--- a/Projects/XPLAINBridge/Lib/SoftUART.c
+++ b/Projects/XPLAINBridge/Lib/SoftUART.c
@@ -120,7 +120,7 @@ ISR(TIMER1_CAPT_vect, ISR_BLOCK)
 
                /* Reception complete, store the received byte if stop bit valid */
                if (SRX_Cached)
-                 RingBuffer_Insert(&XMEGAtoUSB_Buffer, RX_Data);
+                 RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data);
        }
 }
 
@@ -140,13 +140,13 @@ ISR(TIMER3_CAPT_vect, ISR_BLOCK)
                TX_Data >>= 1;
                TX_BitsRemaining--;
        }
-       else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoXMEGA_Buffer)))
+       else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoUART_Buffer)))
        {
                /* Start bit - TX line low */
                STXPORT &= ~(1 << STX);
 
                /* Transmission complete, get the next byte to send (if available) */
-               TX_Data          = ~RingBuffer_Remove(&USBtoXMEGA_Buffer);
+               TX_Data          = ~RingBuffer_Remove(&USBtoUART_Buffer);
                TX_BitsRemaining = 9;
        }
 }