+# Doxyfile 1.8.0\r
+\r
+# This file describes the settings to be used by the documentation system\r
+# doxygen (www.doxygen.org) for a project.\r
+#\r
+# All text after a hash (#) is considered a comment and will be ignored.\r
+# The format is:\r
+# TAG = value [value, ...]\r
+# For lists items can also be appended using:\r
+# TAG += value [value, ...]\r
+# Values that contain spaces should be placed between quotes (" ").\r
+\r
+#---------------------------------------------------------------------------\r
+# Project related configuration options\r
+#---------------------------------------------------------------------------\r
+\r
+# This tag specifies the encoding used for all characters in the config file\r
+# that follow. The default is UTF-8 which is also the encoding used for all\r
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the\r
+# iconv built into libc) for the transcoding. See\r
+# http://www.gnu.org/software/libiconv for the list of possible encodings.\r
+\r
+DOXYFILE_ENCODING = UTF-8\r
+\r
+# The PROJECT_NAME tag is a single word (or sequence of words) that should\r
+# identify the project. Note that if you do not use Doxywizard you need\r
+# to put quotes around the project name if it contains spaces.\r
+\r
+PROJECT_NAME = "Simon Foster's USB Serial to HD44780 LCD Project"\r
+\r
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.\r
+# This could be handy for archiving the generated documentation or\r
+# if some version control system is used.\r
+\r
+PROJECT_NUMBER = 0.0.0\r
+\r
+# Using the PROJECT_BRIEF tag one can provide an optional one line description\r
+# for a project that appears at the top of each page and should give viewer\r
+# a quick idea about the purpose of the project. Keep the description short.\r
+\r
+PROJECT_BRIEF =\r
+\r
+# With the PROJECT_LOGO tag one can specify an logo or icon that is\r
+# included in the documentation. The maximum height of the logo should not\r
+# exceed 55 pixels and the maximum width should not exceed 200 pixels.\r
+# Doxygen will copy the logo to the output directory.\r
+\r
+PROJECT_LOGO =\r
+\r
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)\r
+# base path where the generated documentation will be put.\r
+# If a relative path is entered, it will be relative to the location\r
+# where doxygen was started. If left blank the current directory will be used.\r
+\r
+OUTPUT_DIRECTORY = ./Documentation/\r
+\r
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create\r
+# 4096 sub-directories (in 2 levels) under the output directory of each output\r
+# format and will distribute the generated files over these directories.\r
+# Enabling this option can be useful when feeding doxygen a huge amount of\r
+# source files, where putting all generated files in the same directory would\r
+# otherwise cause performance problems for the file system.\r
+\r
+CREATE_SUBDIRS = NO\r
+\r
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all\r
+# documentation generated by doxygen is written. Doxygen will use this\r
+# information to generate all constant output in the proper language.\r
+# The default language is English, other supported languages are:\r
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,\r
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,\r
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English\r
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,\r
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,\r
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.\r
+\r
+OUTPUT_LANGUAGE = English\r
+\r
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will\r
+# include brief member descriptions after the members that are listed in\r
+# the file and class documentation (similar to JavaDoc).\r
+# Set to NO to disable this.\r
+\r
+BRIEF_MEMBER_DESC = YES\r
+\r
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend\r
+# the brief description of a member or function before the detailed description.\r
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the\r
+# brief descriptions will be completely suppressed.\r
+\r
+REPEAT_BRIEF = YES\r
+\r
+# This tag implements a quasi-intelligent brief description abbreviator\r
+# that is used to form the text in various listings. Each string\r
+# in this list, if found as the leading text of the brief description, will be\r
+# stripped from the text and the result after processing the whole list, is\r
+# used as the annotated text. Otherwise, the brief description is used as-is.\r
+# If left blank, the following values are used ("$name" is automatically\r
+# replaced with the name of the entity): "The $name class" "The $name widget"\r
+# "The $name file" "is" "provides" "specifies" "contains"\r
+# "represents" "a" "an" "the"\r
+\r
+ABBREVIATE_BRIEF = "The $name class" \\r
+ "The $name widget" \\r
+ "The $name file" \\r
+ is \\r
+ provides \\r
+ specifies \\r
+ contains \\r
+ represents \\r
+ a \\r
+ an \\r
+ the\r
+\r
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then\r
+# Doxygen will generate a detailed section even if there is only a brief\r
+# description.\r
+\r
+ALWAYS_DETAILED_SEC = NO\r
+\r
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all\r
+# inherited members of a class in the documentation of that class as if those\r
+# members were ordinary class members. Constructors, destructors and assignment\r
+# operators of the base classes will not be shown.\r
+\r
+INLINE_INHERITED_MEMB = NO\r
+\r
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full\r
+# path before files name in the file list and in the header files. If set\r
+# to NO the shortest path that makes the file name unique will be used.\r
+\r
+FULL_PATH_NAMES = YES\r
+\r
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag\r
+# can be used to strip a user-defined part of the path. Stripping is\r
+# only done if one of the specified strings matches the left-hand part of\r
+# the path. The tag can be used to show relative paths in the file list.\r
+# If left blank the directory from which doxygen is run is used as the\r
+# path to strip.\r
+\r
+STRIP_FROM_PATH =\r
+\r
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of\r
+# the path mentioned in the documentation of a class, which tells\r
+# the reader which header file to include in order to use a class.\r
+# If left blank only the name of the header file containing the class\r
+# definition is used. Otherwise one should specify the include paths that\r
+# are normally passed to the compiler using the -I flag.\r
+\r
+STRIP_FROM_INC_PATH =\r
+\r
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter\r
+# (but less readable) file names. This can be useful if your file system\r
+# doesn't support long names like on DOS, Mac, or CD-ROM.\r
+\r
+SHORT_NAMES = YES\r
+\r
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen\r
+# will interpret the first line (until the first dot) of a JavaDoc-style\r
+# comment as the brief description. If set to NO, the JavaDoc\r
+# comments will behave just like regular Qt-style comments\r
+# (thus requiring an explicit @brief command for a brief description.)\r
+\r
+JAVADOC_AUTOBRIEF = NO\r
+\r
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will\r
+# interpret the first line (until the first dot) of a Qt-style\r
+# comment as the brief description. If set to NO, the comments\r
+# will behave just like regular Qt-style comments (thus requiring\r
+# an explicit \brief command for a brief description.)\r
+\r
+QT_AUTOBRIEF = NO\r
+\r
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen\r
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///\r
+# comments) as a brief description. This used to be the default behaviour.\r
+# The new default is to treat a multi-line C++ comment block as a detailed\r
+# description. Set this tag to YES if you prefer the old behaviour instead.\r
+\r
+MULTILINE_CPP_IS_BRIEF = NO\r
+\r
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented\r
+# member inherits the documentation from any documented member that it\r
+# re-implements.\r
+\r
+INHERIT_DOCS = YES\r
+\r
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce\r
+# a new page for each member. If set to NO, the documentation of a member will\r
+# be part of the file/class/namespace that contains it.\r
+\r
+SEPARATE_MEMBER_PAGES = NO\r
+\r
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.\r
+# Doxygen uses this value to replace tabs by spaces in code fragments.\r
+\r
+TAB_SIZE = 4\r
+\r
+# This tag can be used to specify a number of aliases that acts\r
+# as commands in the documentation. An alias has the form "name=value".\r
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to\r
+# put the command \sideeffect (or @sideeffect) in the documentation, which\r
+# will result in a user-defined paragraph with heading "Side Effects:".\r
+# You can put \n's in the value part of an alias to insert newlines.\r
+\r
+ALIASES =\r
+\r
+# This tag can be used to specify a number of word-keyword mappings (TCL only).\r
+# A mapping has the form "name=value". For example adding\r
+# "class=itcl::class" will allow you to use the command class in the\r
+# itcl::class meaning.\r
+\r
+TCL_SUBST =\r
+\r
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C\r
+# sources only. Doxygen will then generate output that is more tailored for C.\r
+# For instance, some of the names that are used will be different. The list\r
+# of all members will be omitted, etc.\r
+\r
+OPTIMIZE_OUTPUT_FOR_C = YES\r
+\r
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java\r
+# sources only. Doxygen will then generate output that is more tailored for\r
+# Java. For instance, namespaces will be presented as packages, qualified\r
+# scopes will look different, etc.\r
+\r
+OPTIMIZE_OUTPUT_JAVA = NO\r
+\r
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran\r
+# sources only. Doxygen will then generate output that is more tailored for\r
+# Fortran.\r
+\r
+OPTIMIZE_FOR_FORTRAN = NO\r
+\r
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL\r
+# sources. Doxygen will then generate output that is tailored for\r
+# VHDL.\r
+\r
+OPTIMIZE_OUTPUT_VHDL = NO\r
+\r
+# Doxygen selects the parser to use depending on the extension of the files it\r
+# parses. With this tag you can assign which parser to use for a given extension.\r
+# Doxygen has a built-in mapping, but you can override or extend it using this\r
+# tag. The format is ext=language, where ext is a file extension, and language\r
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,\r
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make\r
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C\r
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions\r
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.\r
+\r
+EXTENSION_MAPPING =\r
+\r
+# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all\r
+# comments according to the Markdown format, which allows for more readable\r
+# documentation. See http://daringfireball.net/projects/markdown/ for details.\r
+# The output of markdown processing is further processed by doxygen, so you\r
+# can mix doxygen, HTML, and XML commands with Markdown formatting.\r
+# Disable only in case of backward compatibilities issues.\r
+\r
+MARKDOWN_SUPPORT = NO\r
+\r
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want\r
+# to include (a tag file for) the STL sources as input, then you should\r
+# set this tag to YES in order to let doxygen match functions declarations and\r
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.\r
+# func(std::string) {}). This also makes the inheritance and collaboration\r
+# diagrams that involve STL classes more complete and accurate.\r
+\r
+BUILTIN_STL_SUPPORT = NO\r
+\r
+# If you use Microsoft's C++/CLI language, you should set this option to YES to\r
+# enable parsing support.\r
+\r
+CPP_CLI_SUPPORT = NO\r
+\r
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.\r
+# Doxygen will parse them like normal C++ but will assume all classes use public\r
+# instead of private inheritance when no explicit protection keyword is present.\r
+\r
+SIP_SUPPORT = NO\r
+\r
+# For Microsoft's IDL there are propget and propput attributes to indicate getter\r
+# and setter methods for a property. Setting this option to YES (the default)\r
+# will make doxygen replace the get and set methods by a property in the\r
+# documentation. This will only work if the methods are indeed getting or\r
+# setting a simple type. If this is not the case, or you want to show the\r
+# methods anyway, you should set this option to NO.\r
+\r
+IDL_PROPERTY_SUPPORT = YES\r
+\r
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC\r
+# tag is set to YES, then doxygen will reuse the documentation of the first\r
+# member in the group (if any) for the other members of the group. By default\r
+# all members of a group must be documented explicitly.\r
+\r
+DISTRIBUTE_GROUP_DOC = NO\r
+\r
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of\r
+# the same type (for instance a group of public functions) to be put as a\r
+# subgroup of that type (e.g. under the Public Functions section). Set it to\r
+# NO to prevent subgrouping. Alternatively, this can be done per class using\r
+# the \nosubgrouping command.\r
+\r
+SUBGROUPING = YES\r
+\r
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and\r
+# unions are shown inside the group in which they are included (e.g. using\r
+# @ingroup) instead of on a separate page (for HTML and Man pages) or\r
+# section (for LaTeX and RTF).\r
+\r
+INLINE_GROUPED_CLASSES = NO\r
+\r
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and\r
+# unions with only public data fields will be shown inline in the documentation\r
+# of the scope in which they are defined (i.e. file, namespace, or group\r
+# documentation), provided this scope is documented. If set to NO (the default),\r
+# structs, classes, and unions are shown on a separate page (for HTML and Man\r
+# pages) or section (for LaTeX and RTF).\r
+\r
+INLINE_SIMPLE_STRUCTS = NO\r
+\r
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum\r
+# is documented as struct, union, or enum with the name of the typedef. So\r
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct\r
+# with name TypeT. When disabled the typedef will appear as a member of a file,\r
+# namespace, or class. And the struct will be named TypeS. This can typically\r
+# be useful for C code in case the coding convention dictates that all compound\r
+# types are typedef'ed and only the typedef is referenced, never the tag name.\r
+\r
+TYPEDEF_HIDES_STRUCT = NO\r
+\r
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to\r
+# determine which symbols to keep in memory and which to flush to disk.\r
+# When the cache is full, less often used symbols will be written to disk.\r
+# For small to medium size projects (<1000 input files) the default value is\r
+# probably good enough. For larger projects a too small cache size can cause\r
+# doxygen to be busy swapping symbols to and from disk most of the time\r
+# causing a significant performance penalty.\r
+# If the system has enough physical memory increasing the cache will improve the\r
+# performance by keeping more symbols in memory. Note that the value works on\r
+# a logarithmic scale so increasing the size by one will roughly double the\r
+# memory usage. The cache size is given by this formula:\r
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,\r
+# corresponding to a cache size of 2^16 = 65536 symbols.\r
+\r
+SYMBOL_CACHE_SIZE = 0\r
+\r
+# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be\r
+# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given\r
+# their name and scope. Since this can be an expensive process and often the\r
+# same symbol appear multiple times in the code, doxygen keeps a cache of\r
+# pre-resolved symbols. If the cache is too small doxygen will become slower.\r
+# If the cache is too large, memory is wasted. The cache size is given by this\r
+# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,\r
+# corresponding to a cache size of 2^16 = 65536 symbols.\r
+\r
+LOOKUP_CACHE_SIZE = 0\r
+\r
+#---------------------------------------------------------------------------\r
+# Build related configuration options\r
+#---------------------------------------------------------------------------\r
+\r
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in\r
+# documentation are documented, even if no documentation was available.\r
+# Private class members and static file members will be hidden unless\r
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES\r
+\r
+EXTRACT_ALL = YES\r
+\r
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class\r
+# will be included in the documentation.\r
+\r
+EXTRACT_PRIVATE = YES\r
+\r
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.\r
+\r
+EXTRACT_PACKAGE = NO\r
+\r
+# If the EXTRACT_STATIC tag is set to YES all static members of a file\r
+# will be included in the documentation.\r
+\r
+EXTRACT_STATIC = YES\r
+\r
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)\r
+# defined locally in source files will be included in the documentation.\r
+# If set to NO only classes defined in header files are included.\r
+\r
+EXTRACT_LOCAL_CLASSES = YES\r
+\r
+# This flag is only useful for Objective-C code. When set to YES local\r
+# methods, which are defined in the implementation section but not in\r
+# the interface are included in the documentation.\r
+# If set to NO (the default) only methods in the interface are included.\r
+\r
+EXTRACT_LOCAL_METHODS = NO\r
+\r
+# If this flag is set to YES, the members of anonymous namespaces will be\r
+# extracted and appear in the documentation as a namespace called\r
+# 'anonymous_namespace{file}', where file will be replaced with the base\r
+# name of the file that contains the anonymous namespace. By default\r
+# anonymous namespaces are hidden.\r
+\r
+EXTRACT_ANON_NSPACES = NO\r
+\r
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all\r
+# undocumented members of documented classes, files or namespaces.\r
+# If set to NO (the default) these members will be included in the\r
+# various overviews, but no documentation section is generated.\r
+# This option has no effect if EXTRACT_ALL is enabled.\r
+\r
+HIDE_UNDOC_MEMBERS = NO\r
+\r
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all\r
+# undocumented classes that are normally visible in the class hierarchy.\r
+# If set to NO (the default) these classes will be included in the various\r
+# overviews. This option has no effect if EXTRACT_ALL is enabled.\r
+\r
+HIDE_UNDOC_CLASSES = NO\r
+\r
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all\r
+# friend (class|struct|union) declarations.\r
+# If set to NO (the default) these declarations will be included in the\r
+# documentation.\r
+\r
+HIDE_FRIEND_COMPOUNDS = NO\r
+\r
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any\r
+# documentation blocks found inside the body of a function.\r
+# If set to NO (the default) these blocks will be appended to the\r
+# function's detailed documentation block.\r
+\r
+HIDE_IN_BODY_DOCS = NO\r
+\r
+# The INTERNAL_DOCS tag determines if documentation\r
+# that is typed after a \internal command is included. If the tag is set\r
+# to NO (the default) then the documentation will be excluded.\r
+# Set it to YES to include the internal documentation.\r
+\r
+INTERNAL_DOCS = NO\r
+\r
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate\r
+# file names in lower-case letters. If set to YES upper-case letters are also\r
+# allowed. This is useful if you have classes or files whose names only differ\r
+# in case and if your file system supports case sensitive file names. Windows\r
+# and Mac users are advised to set this option to NO.\r
+\r
+CASE_SENSE_NAMES = NO\r
+\r
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen\r
+# will show members with their full class and namespace scopes in the\r
+# documentation. If set to YES the scope will be hidden.\r
+\r
+HIDE_SCOPE_NAMES = NO\r
+\r
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen\r
+# will put a list of the files that are included by a file in the documentation\r
+# of that file.\r
+\r
+SHOW_INCLUDE_FILES = YES\r
+\r
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen\r
+# will list include files with double quotes in the documentation\r
+# rather than with sharp brackets.\r
+\r
+FORCE_LOCAL_INCLUDES = NO\r
+\r
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]\r
+# is inserted in the documentation for inline members.\r
+\r
+INLINE_INFO = YES\r
+\r
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen\r
+# will sort the (detailed) documentation of file and class members\r
+# alphabetically by member name. If set to NO the members will appear in\r
+# declaration order.\r
+\r
+SORT_MEMBER_DOCS = YES\r
+\r
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the\r
+# brief documentation of file, namespace and class members alphabetically\r
+# by member name. If set to NO (the default) the members will appear in\r
+# declaration order.\r
+\r
+SORT_BRIEF_DOCS = NO\r
+\r
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen\r
+# will sort the (brief and detailed) documentation of class members so that\r
+# constructors and destructors are listed first. If set to NO (the default)\r
+# the constructors will appear in the respective orders defined by\r
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.\r
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO\r
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.\r
+\r
+SORT_MEMBERS_CTORS_1ST = NO\r
+\r
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the\r
+# hierarchy of group names into alphabetical order. If set to NO (the default)\r
+# the group names will appear in their defined order.\r
+\r
+SORT_GROUP_NAMES = NO\r
+\r
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be\r
+# sorted by fully-qualified names, including namespaces. If set to\r
+# NO (the default), the class list will be sorted only by class name,\r
+# not including the namespace part.\r
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.\r
+# Note: This option applies only to the class list, not to the\r
+# alphabetical list.\r
+\r
+SORT_BY_SCOPE_NAME = NO\r
+\r
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to\r
+# do proper type resolution of all parameters of a function it will reject a\r
+# match between the prototype and the implementation of a member function even\r
+# if there is only one candidate or it is obvious which candidate to choose\r
+# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen\r
+# will still accept a match between prototype and implementation in such cases.\r
+\r
+STRICT_PROTO_MATCHING = NO\r
+\r
+# The GENERATE_TODOLIST tag can be used to enable (YES) or\r
+# disable (NO) the todo list. This list is created by putting \todo\r
+# commands in the documentation.\r
+\r
+GENERATE_TODOLIST = NO\r
+\r
+# The GENERATE_TESTLIST tag can be used to enable (YES) or\r
+# disable (NO) the test list. This list is created by putting \test\r
+# commands in the documentation.\r
+\r
+GENERATE_TESTLIST = NO\r
+\r
+# The GENERATE_BUGLIST tag can be used to enable (YES) or\r
+# disable (NO) the bug list. This list is created by putting \bug\r
+# commands in the documentation.\r
+\r
+GENERATE_BUGLIST = NO\r
+\r
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or\r
+# disable (NO) the deprecated list. This list is created by putting\r
+# \deprecated commands in the documentation.\r
+\r
+GENERATE_DEPRECATEDLIST= YES\r
+\r
+# The ENABLED_SECTIONS tag can be used to enable conditional\r
+# documentation sections, marked by \if sectionname ... \endif.\r
+\r
+ENABLED_SECTIONS =\r
+\r
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines\r
+# the initial value of a variable or macro consists of for it to appear in\r
+# the documentation. If the initializer consists of more lines than specified\r
+# here it will be hidden. Use a value of 0 to hide initializers completely.\r
+# The appearance of the initializer of individual variables and macros in the\r
+# documentation can be controlled using \showinitializer or \hideinitializer\r
+# command in the documentation regardless of this setting.\r
+\r
+MAX_INITIALIZER_LINES = 30\r
+\r
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated\r
+# at the bottom of the documentation of classes and structs. If set to YES the\r
+# list will mention the files that were used to generate the documentation.\r
+\r
+SHOW_USED_FILES = YES\r
+\r
+# If the sources in your project are distributed over multiple directories\r
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy\r
+# in the documentation. The default is NO.\r
+\r
+SHOW_DIRECTORIES = YES\r
+\r
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.\r
+# This will remove the Files entry from the Quick Index and from the\r
+# Folder Tree View (if specified). The default is YES.\r
+\r
+SHOW_FILES = YES\r
+\r
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the\r
+# Namespaces page.\r
+# This will remove the Namespaces entry from the Quick Index\r
+# and from the Folder Tree View (if specified). The default is YES.\r
+\r
+SHOW_NAMESPACES = YES\r
+\r
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that\r
+# doxygen should invoke to get the current version for each file (typically from\r
+# the version control system). Doxygen will invoke the program by executing (via\r
+# popen()) the command <command> <input-file>, where <command> is the value of\r
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file\r
+# provided by doxygen. Whatever the program writes to standard output\r
+# is used as the file version. See the manual for examples.\r
+\r
+FILE_VERSION_FILTER =\r
+\r
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed\r
+# by doxygen. The layout file controls the global structure of the generated\r
+# output files in an output format independent way. The create the layout file\r
+# that represents doxygen's defaults, run doxygen with the -l option.\r
+# You can optionally specify a file name after the option, if omitted\r
+# DoxygenLayout.xml will be used as the name of the layout file.\r
+\r
+LAYOUT_FILE =\r
+\r
+# The CITE_BIB_FILES tag can be used to specify one or more bib files\r
+# containing the references data. This must be a list of .bib files. The\r
+# .bib extension is automatically appended if omitted. Using this command\r
+# requires the bibtex tool to be installed. See also\r
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style\r
+# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this\r
+# feature you need bibtex and perl available in the search path.\r
+\r
+CITE_BIB_FILES =\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to warning and progress messages\r
+#---------------------------------------------------------------------------\r
+\r
+# The QUIET tag can be used to turn on/off the messages that are generated\r
+# by doxygen. Possible values are YES and NO. If left blank NO is used.\r
+\r
+QUIET = YES\r
+\r
+# The WARNINGS tag can be used to turn on/off the warning messages that are\r
+# generated by doxygen. Possible values are YES and NO. If left blank\r
+# NO is used.\r
+\r
+WARNINGS = YES\r
+\r
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings\r
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will\r
+# automatically be disabled.\r
+\r
+WARN_IF_UNDOCUMENTED = YES\r
+\r
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for\r
+# potential errors in the documentation, such as not documenting some\r
+# parameters in a documented function, or documenting parameters that\r
+# don't exist or using markup commands wrongly.\r
+\r
+WARN_IF_DOC_ERROR = YES\r
+\r
+# The WARN_NO_PARAMDOC option can be enabled to get warnings for\r
+# functions that are documented, but have no documentation for their parameters\r
+# or return value. If set to NO (the default) doxygen will only warn about\r
+# wrong or incomplete parameter documentation, but not about the absence of\r
+# documentation.\r
+\r
+WARN_NO_PARAMDOC = YES\r
+\r
+# The WARN_FORMAT tag determines the format of the warning messages that\r
+# doxygen can produce. The string should contain the $file, $line, and $text\r
+# tags, which will be replaced by the file and line number from which the\r
+# warning originated and the warning text. Optionally the format may contain\r
+# $version, which will be replaced by the version of the file (if it could\r
+# be obtained via FILE_VERSION_FILTER)\r
+\r
+WARN_FORMAT = "$file:$line: $text"\r
+\r
+# The WARN_LOGFILE tag can be used to specify a file to which warning\r
+# and error messages should be written. If left blank the output is written\r
+# to stderr.\r
+\r
+WARN_LOGFILE =\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the input files\r
+#---------------------------------------------------------------------------\r
+\r
+# The INPUT tag can be used to specify the files and/or directories that contain\r
+# documented source files. You may enter file names like "myfile.cpp" or\r
+# directories like "/usr/src/myproject". Separate the files or directories\r
+# with spaces.\r
+\r
+INPUT = ./\r
+\r
+# This tag can be used to specify the character encoding of the source files\r
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is\r
+# also the default input encoding. Doxygen uses libiconv (or the iconv built\r
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for\r
+# the list of possible encodings.\r
+\r
+INPUT_ENCODING = UTF-8\r
+\r
+# If the value of the INPUT tag contains directories, you can use the\r
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp\r
+# and *.h) to filter out the source-files in the directories. If left\r
+# blank the following patterns are tested:\r
+# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh\r
+# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py\r
+# *.f90 *.f *.for *.vhd *.vhdl\r
+\r
+FILE_PATTERNS = *.h \\r
+ *.c \\r
+ *.txt\r
+\r
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories\r
+# should be searched for input files as well. Possible values are YES and NO.\r
+# If left blank NO is used.\r
+\r
+RECURSIVE = YES\r
+\r
+# The EXCLUDE tag can be used to specify files and/or directories that should be\r
+# excluded from the INPUT source files. This way you can easily exclude a\r
+# subdirectory from a directory tree whose root is specified with the INPUT tag.\r
+# Note that relative paths are relative to the directory from which doxygen is\r
+# run.\r
+\r
+EXCLUDE = Documentation/\r
+\r
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or\r
+# directories that are symbolic links (a Unix file system feature) are excluded\r
+# from the input.\r
+\r
+EXCLUDE_SYMLINKS = NO\r
+\r
+# If the value of the INPUT tag contains directories, you can use the\r
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude\r
+# certain files from those directories. Note that the wildcards are matched\r
+# against the file with absolute path, so to exclude all test directories\r
+# for example use the pattern */test/*\r
+\r
+EXCLUDE_PATTERNS =\r
+\r
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names\r
+# (namespaces, classes, functions, etc.) that should be excluded from the\r
+# output. The symbol name can be a fully qualified name, a word, or if the\r
+# wildcard * is used, a substring. Examples: ANamespace, AClass,\r
+# AClass::ANamespace, ANamespace::*Test\r
+\r
+EXCLUDE_SYMBOLS = __* \\r
+ INCLUDE_FROM_*\r
+\r
+# The EXAMPLE_PATH tag can be used to specify one or more files or\r
+# directories that contain example code fragments that are included (see\r
+# the \include command).\r
+\r
+EXAMPLE_PATH =\r
+\r
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the\r
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp\r
+# and *.h) to filter out the source-files in the directories. If left\r
+# blank all files are included.\r
+\r
+EXAMPLE_PATTERNS = *\r
+\r
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be\r
+# searched for input files to be used with the \include or \dontinclude\r
+# commands irrespective of the value of the RECURSIVE tag.\r
+# Possible values are YES and NO. If left blank NO is used.\r
+\r
+EXAMPLE_RECURSIVE = NO\r
+\r
+# The IMAGE_PATH tag can be used to specify one or more files or\r
+# directories that contain image that are included in the documentation (see\r
+# the \image command).\r
+\r
+IMAGE_PATH =\r
+\r
+# The INPUT_FILTER tag can be used to specify a program that doxygen should\r
+# invoke to filter for each input file. Doxygen will invoke the filter program\r
+# by executing (via popen()) the command <filter> <input-file>, where <filter>\r
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an\r
+# input file. Doxygen will then use the output that the filter program writes\r
+# to standard output.\r
+# If FILTER_PATTERNS is specified, this tag will be\r
+# ignored.\r
+\r
+INPUT_FILTER =\r
+\r
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern\r
+# basis.\r
+# Doxygen will compare the file name with each pattern and apply the\r
+# filter if there is a match.\r
+# The filters are a list of the form:\r
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further\r
+# info on how filters are used. If FILTER_PATTERNS is empty or if\r
+# non of the patterns match the file name, INPUT_FILTER is applied.\r
+\r
+FILTER_PATTERNS =\r
+\r
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using\r
+# INPUT_FILTER) will be used to filter the input files when producing source\r
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).\r
+\r
+FILTER_SOURCE_FILES = NO\r
+\r
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file\r
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any)\r
+# and it is also possible to disable source filtering for a specific pattern\r
+# using *.ext= (so without naming a filter). This option only has effect when\r
+# FILTER_SOURCE_FILES is enabled.\r
+\r
+FILTER_SOURCE_PATTERNS =\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to source browsing\r
+#---------------------------------------------------------------------------\r
+\r
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will\r
+# be generated. Documented entities will be cross-referenced with these sources.\r
+# Note: To get rid of all source code in the generated output, make sure also\r
+# VERBATIM_HEADERS is set to NO.\r
+\r
+SOURCE_BROWSER = NO\r
+\r
+# Setting the INLINE_SOURCES tag to YES will include the body\r
+# of functions and classes directly in the documentation.\r
+\r
+INLINE_SOURCES = NO\r
+\r
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct\r
+# doxygen to hide any special comment blocks from generated source code\r
+# fragments. Normal C and C++ comments will always remain visible.\r
+\r
+STRIP_CODE_COMMENTS = YES\r
+\r
+# If the REFERENCED_BY_RELATION tag is set to YES\r
+# then for each documented function all documented\r
+# functions referencing it will be listed.\r
+\r
+REFERENCED_BY_RELATION = NO\r
+\r
+# If the REFERENCES_RELATION tag is set to YES\r
+# then for each documented function all documented entities\r
+# called/used by that function will be listed.\r
+\r
+REFERENCES_RELATION = NO\r
+\r
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)\r
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from\r
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will\r
+# link to the source code.\r
+# Otherwise they will link to the documentation.\r
+\r
+REFERENCES_LINK_SOURCE = NO\r
+\r
+# If the USE_HTAGS tag is set to YES then the references to source code\r
+# will point to the HTML generated by the htags(1) tool instead of doxygen\r
+# built-in source browser. The htags tool is part of GNU's global source\r
+# tagging system (see http://www.gnu.org/software/global/global.html). You\r
+# will need version 4.8.6 or higher.\r
+\r
+USE_HTAGS = NO\r
+\r
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen\r
+# will generate a verbatim copy of the header file for each class for\r
+# which an include is specified. Set to NO to disable this.\r
+\r
+VERBATIM_HEADERS = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the alphabetical class index\r
+#---------------------------------------------------------------------------\r
+\r
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index\r
+# of all compounds will be generated. Enable this if the project\r
+# contains a lot of classes, structs, unions or interfaces.\r
+\r
+ALPHABETICAL_INDEX = YES\r
+\r
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then\r
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns\r
+# in which this list will be split (can be a number in the range [1..20])\r
+\r
+COLS_IN_ALPHA_INDEX = 5\r
+\r
+# In case all classes in a project start with a common prefix, all\r
+# classes will be put under the same header in the alphabetical index.\r
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that\r
+# should be ignored while generating the index headers.\r
+\r
+IGNORE_PREFIX =\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the HTML output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will\r
+# generate HTML output.\r
+\r
+GENERATE_HTML = YES\r
+\r
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.\r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
+# put in front of it. If left blank `html' will be used as the default path.\r
+\r
+HTML_OUTPUT = html\r
+\r
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for\r
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank\r
+# doxygen will generate files with .html extension.\r
+\r
+HTML_FILE_EXTENSION = .html\r
+\r
+# The HTML_HEADER tag can be used to specify a personal HTML header for\r
+# each generated HTML page. If it is left blank doxygen will generate a\r
+# standard header. Note that when using a custom header you are responsible\r
+# for the proper inclusion of any scripts and style sheets that doxygen\r
+# needs, which is dependent on the configuration options used.\r
+# It is advised to generate a default header using "doxygen -w html\r
+# header.html footer.html stylesheet.css YourConfigFile" and then modify\r
+# that header. Note that the header is subject to change so you typically\r
+# have to redo this when upgrading to a newer version of doxygen or when\r
+# changing the value of configuration settings such as GENERATE_TREEVIEW!\r
+\r
+HTML_HEADER =\r
+\r
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for\r
+# each generated HTML page. If it is left blank doxygen will generate a\r
+# standard footer.\r
+\r
+HTML_FOOTER =\r
+\r
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading\r
+# style sheet that is used by each HTML page. It can be used to\r
+# fine-tune the look of the HTML output. If the tag is left blank doxygen\r
+# will generate a default style sheet. Note that doxygen will try to copy\r
+# the style sheet file to the HTML output directory, so don't put your own\r
+# style sheet in the HTML output directory as well, or it will be erased!\r
+\r
+HTML_STYLESHEET =\r
+\r
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or\r
+# other source files which should be copied to the HTML output directory. Note\r
+# that these files will be copied to the base HTML output directory. Use the\r
+# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these\r
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that\r
+# the files will be copied as-is; there are no commands or markers available.\r
+\r
+HTML_EXTRA_FILES =\r
+\r
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.\r
+# Doxygen will adjust the colors in the style sheet and background images\r
+# according to this color. Hue is specified as an angle on a colorwheel,\r
+# see http://en.wikipedia.org/wiki/Hue for more information.\r
+# For instance the value 0 represents red, 60 is yellow, 120 is green,\r
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.\r
+# The allowed range is 0 to 359.\r
+\r
+HTML_COLORSTYLE_HUE = 220\r
+\r
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of\r
+# the colors in the HTML output. For a value of 0 the output will use\r
+# grayscales only. A value of 255 will produce the most vivid colors.\r
+\r
+HTML_COLORSTYLE_SAT = 100\r
+\r
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to\r
+# the luminance component of the colors in the HTML output. Values below\r
+# 100 gradually make the output lighter, whereas values above 100 make\r
+# the output darker. The value divided by 100 is the actual gamma applied,\r
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,\r
+# and 100 does not change the gamma.\r
+\r
+HTML_COLORSTYLE_GAMMA = 80\r
+\r
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML\r
+# page will contain the date and time when the page was generated. Setting\r
+# this to NO can help when comparing the output of multiple runs.\r
+\r
+HTML_TIMESTAMP = NO\r
+\r
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,\r
+# files or namespaces will be aligned in HTML using tables. If set to\r
+# NO a bullet list will be used.\r
+\r
+HTML_ALIGN_MEMBERS = YES\r
+\r
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML\r
+# documentation will contain sections that can be hidden and shown after the\r
+# page has loaded. For this to work a browser that supports\r
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox\r
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).\r
+\r
+HTML_DYNAMIC_SECTIONS = YES\r
+\r
+# If the GENERATE_DOCSET tag is set to YES, additional index files\r
+# will be generated that can be used as input for Apple's Xcode 3\r
+# integrated development environment, introduced with OSX 10.5 (Leopard).\r
+# To create a documentation set, doxygen will generate a Makefile in the\r
+# HTML output directory. Running make will produce the docset in that\r
+# directory and running "make install" will install the docset in\r
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find\r
+# it at startup.\r
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html\r
+# for more information.\r
+\r
+GENERATE_DOCSET = NO\r
+\r
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the\r
+# feed. A documentation feed provides an umbrella under which multiple\r
+# documentation sets from a single provider (such as a company or product suite)\r
+# can be grouped.\r
+\r
+DOCSET_FEEDNAME = "Doxygen generated docs"\r
+\r
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that\r
+# should uniquely identify the documentation set bundle. This should be a\r
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen\r
+# will append .docset to the name.\r
+\r
+DOCSET_BUNDLE_ID = org.doxygen.Project\r
+\r
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify\r
+# the documentation publisher. This should be a reverse domain-name style\r
+# string, e.g. com.mycompany.MyDocSet.documentation.\r
+\r
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher\r
+\r
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.\r
+\r
+DOCSET_PUBLISHER_NAME = Publisher\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files\r
+# will be generated that can be used as input for tools like the\r
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)\r
+# of the generated HTML documentation.\r
+\r
+GENERATE_HTMLHELP = NO\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can\r
+# be used to specify the file name of the resulting .chm file. You\r
+# can add a path in front of the file if the result should not be\r
+# written to the html output directory.\r
+\r
+CHM_FILE =\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can\r
+# be used to specify the location (absolute path including file name) of\r
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run\r
+# the HTML help compiler on the generated index.hhp.\r
+\r
+HHC_LOCATION =\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag\r
+# controls if a separate .chi index file is generated (YES) or that\r
+# it should be included in the master .chm file (NO).\r
+\r
+GENERATE_CHI = NO\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING\r
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file\r
+# content.\r
+\r
+CHM_INDEX_ENCODING =\r
+\r
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag\r
+# controls whether a binary table of contents is generated (YES) or a\r
+# normal table of contents (NO) in the .chm file.\r
+\r
+BINARY_TOC = NO\r
+\r
+# The TOC_EXPAND flag can be set to YES to add extra items for group members\r
+# to the contents of the HTML help documentation and to the tree view.\r
+\r
+TOC_EXPAND = YES\r
+\r
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and\r
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated\r
+# that can be used as input for Qt's qhelpgenerator to generate a\r
+# Qt Compressed Help (.qch) of the generated HTML documentation.\r
+\r
+GENERATE_QHP = NO\r
+\r
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can\r
+# be used to specify the file name of the resulting .qch file.\r
+# The path specified is relative to the HTML output folder.\r
+\r
+QCH_FILE =\r
+\r
+# The QHP_NAMESPACE tag specifies the namespace to use when generating\r
+# Qt Help Project output. For more information please see\r
+# http://doc.trolltech.com/qthelpproject.html#namespace\r
+\r
+QHP_NAMESPACE = org.doxygen.Project\r
+\r
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating\r
+# Qt Help Project output. For more information please see\r
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders\r
+\r
+QHP_VIRTUAL_FOLDER = doc\r
+\r
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to\r
+# add. For more information please see\r
+# http://doc.trolltech.com/qthelpproject.html#custom-filters\r
+\r
+QHP_CUST_FILTER_NAME =\r
+\r
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the\r
+# custom filter to add. For more information please see\r
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">\r
+# Qt Help Project / Custom Filters</a>.\r
+\r
+QHP_CUST_FILTER_ATTRS =\r
+\r
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this\r
+# project's\r
+# filter section matches.\r
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">\r
+# Qt Help Project / Filter Attributes</a>.\r
+\r
+QHP_SECT_FILTER_ATTRS =\r
+\r
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can\r
+# be used to specify the location of Qt's qhelpgenerator.\r
+# If non-empty doxygen will try to run qhelpgenerator on the generated\r
+# .qhp file.\r
+\r
+QHG_LOCATION =\r
+\r
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files\r
+# will be generated, which together with the HTML files, form an Eclipse help\r
+# plugin. To install this plugin and make it available under the help contents\r
+# menu in Eclipse, the contents of the directory containing the HTML and XML\r
+# files needs to be copied into the plugins directory of eclipse. The name of\r
+# the directory within the plugins directory should be the same as\r
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before\r
+# the help appears.\r
+\r
+GENERATE_ECLIPSEHELP = NO\r
+\r
+# A unique identifier for the eclipse help plugin. When installing the plugin\r
+# the directory name containing the HTML and XML files should also have\r
+# this name.\r
+\r
+ECLIPSE_DOC_ID = org.doxygen.Project\r
+\r
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)\r
+# at top of each HTML page. The value NO (the default) enables the index and\r
+# the value YES disables it. Since the tabs have the same information as the\r
+# navigation tree you can set this option to NO if you already set\r
+# GENERATE_TREEVIEW to YES.\r
+\r
+DISABLE_INDEX = NO\r
+\r
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index\r
+# structure should be generated to display hierarchical information.\r
+# If the tag value is set to YES, a side panel will be generated\r
+# containing a tree-like index structure (just like the one that\r
+# is generated for HTML Help). For this to work a browser that supports\r
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).\r
+# Windows users are probably better off using the HTML help feature.\r
+# Since the tree basically has the same information as the tab index you\r
+# could consider to set DISABLE_INDEX to NO when enabling this option.\r
+\r
+GENERATE_TREEVIEW = YES\r
+\r
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values\r
+# (range [0,1..20]) that doxygen will group on one line in the generated HTML\r
+# documentation. Note that a value of 0 will completely suppress the enum\r
+# values from appearing in the overview section.\r
+\r
+ENUM_VALUES_PER_LINE = 1\r
+\r
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,\r
+# and Class Hierarchy pages using a tree view instead of an ordered list.\r
+\r
+USE_INLINE_TREES = NO\r
+\r
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be\r
+# used to set the initial width (in pixels) of the frame in which the tree\r
+# is shown.\r
+\r
+TREEVIEW_WIDTH = 250\r
+\r
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open\r
+# links to external symbols imported via tag files in a separate window.\r
+\r
+EXT_LINKS_IN_WINDOW = NO\r
+\r
+# Use this tag to change the font size of Latex formulas included\r
+# as images in the HTML documentation. The default is 10. Note that\r
+# when you change the font size after a successful doxygen run you need\r
+# to manually remove any form_*.png images from the HTML output directory\r
+# to force them to be regenerated.\r
+\r
+FORMULA_FONTSIZE = 10\r
+\r
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images\r
+# generated for formulas are transparent PNGs. Transparent PNGs are\r
+# not supported properly for IE 6.0, but are supported on all modern browsers.\r
+# Note that when changing this option you need to delete any form_*.png files\r
+# in the HTML output before the changes have effect.\r
+\r
+FORMULA_TRANSPARENT = YES\r
+\r
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax\r
+# (see http://www.mathjax.org) which uses client side Javascript for the\r
+# rendering instead of using prerendered bitmaps. Use this if you do not\r
+# have LaTeX installed or if you want to formulas look prettier in the HTML\r
+# output. When enabled you may also need to install MathJax separately and\r
+# configure the path to it using the MATHJAX_RELPATH option.\r
+\r
+USE_MATHJAX = NO\r
+\r
+# When MathJax is enabled you need to specify the location relative to the\r
+# HTML output directory using the MATHJAX_RELPATH option. The destination\r
+# directory should contain the MathJax.js script. For instance, if the mathjax\r
+# directory is located at the same level as the HTML output directory, then\r
+# MATHJAX_RELPATH should be ../mathjax. The default value points to\r
+# the MathJax Content Delivery Network so you can quickly see the result without\r
+# installing MathJax.\r
+# However, it is strongly recommended to install a local\r
+# copy of MathJax from http://www.mathjax.org before deployment.\r
+\r
+MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest\r
+\r
+# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension\r
+# names that should be enabled during MathJax rendering.\r
+\r
+MATHJAX_EXTENSIONS =\r
+\r
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box\r
+# for the HTML output. The underlying search engine uses javascript\r
+# and DHTML and should work on any modern browser. Note that when using\r
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets\r
+# (GENERATE_DOCSET) there is already a search function so this one should\r
+# typically be disabled. For large projects the javascript based search engine\r
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.\r
+\r
+SEARCHENGINE = NO\r
+\r
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be\r
+# implemented using a PHP enabled web server instead of at the web client\r
+# using Javascript. Doxygen will generate the search PHP script and index\r
+# file to put on the web server. The advantage of the server\r
+# based approach is that it scales better to large projects and allows\r
+# full text search. The disadvantages are that it is more difficult to setup\r
+# and does not have live searching capabilities.\r
+\r
+SERVER_BASED_SEARCH = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the LaTeX output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will\r
+# generate Latex output.\r
+\r
+GENERATE_LATEX = NO\r
+\r
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.\r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
+# put in front of it. If left blank `latex' will be used as the default path.\r
+\r
+LATEX_OUTPUT = latex\r
+\r
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be\r
+# invoked. If left blank `latex' will be used as the default command name.\r
+# Note that when enabling USE_PDFLATEX this option is only used for\r
+# generating bitmaps for formulas in the HTML output, but not in the\r
+# Makefile that is written to the output directory.\r
+\r
+LATEX_CMD_NAME = latex\r
+\r
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to\r
+# generate index for LaTeX. If left blank `makeindex' will be used as the\r
+# default command name.\r
+\r
+MAKEINDEX_CMD_NAME = makeindex\r
+\r
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact\r
+# LaTeX documents. This may be useful for small projects and may help to\r
+# save some trees in general.\r
+\r
+COMPACT_LATEX = NO\r
+\r
+# The PAPER_TYPE tag can be used to set the paper type that is used\r
+# by the printer. Possible values are: a4, letter, legal and\r
+# executive. If left blank a4wide will be used.\r
+\r
+PAPER_TYPE = a4wide\r
+\r
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX\r
+# packages that should be included in the LaTeX output.\r
+\r
+EXTRA_PACKAGES =\r
+\r
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for\r
+# the generated latex document. The header should contain everything until\r
+# the first chapter. If it is left blank doxygen will generate a\r
+# standard header. Notice: only use this tag if you know what you are doing!\r
+\r
+LATEX_HEADER =\r
+\r
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for\r
+# the generated latex document. The footer should contain everything after\r
+# the last chapter. If it is left blank doxygen will generate a\r
+# standard footer. Notice: only use this tag if you know what you are doing!\r
+\r
+LATEX_FOOTER =\r
+\r
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated\r
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will\r
+# contain links (just like the HTML output) instead of page references\r
+# This makes the output suitable for online browsing using a pdf viewer.\r
+\r
+PDF_HYPERLINKS = YES\r
+\r
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of\r
+# plain latex in the generated Makefile. Set this option to YES to get a\r
+# higher quality PDF documentation.\r
+\r
+USE_PDFLATEX = YES\r
+\r
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.\r
+# command to the generated LaTeX files. This will instruct LaTeX to keep\r
+# running if errors occur, instead of asking the user for help.\r
+# This option is also used when generating formulas in HTML.\r
+\r
+LATEX_BATCHMODE = NO\r
+\r
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not\r
+# include the index chapters (such as File Index, Compound Index, etc.)\r
+# in the output.\r
+\r
+LATEX_HIDE_INDICES = NO\r
+\r
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include\r
+# source code with syntax highlighting in the LaTeX output.\r
+# Note that which sources are shown also depends on other settings\r
+# such as SOURCE_BROWSER.\r
+\r
+LATEX_SOURCE_CODE = NO\r
+\r
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the\r
+# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See\r
+# http://en.wikipedia.org/wiki/BibTeX for more info.\r
+\r
+LATEX_BIB_STYLE = plain\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the RTF output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output\r
+# The RTF output is optimized for Word 97 and may not look very pretty with\r
+# other RTF readers or editors.\r
+\r
+GENERATE_RTF = NO\r
+\r
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.\r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
+# put in front of it. If left blank `rtf' will be used as the default path.\r
+\r
+RTF_OUTPUT = rtf\r
+\r
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact\r
+# RTF documents. This may be useful for small projects and may help to\r
+# save some trees in general.\r
+\r
+COMPACT_RTF = NO\r
+\r
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated\r
+# will contain hyperlink fields. The RTF file will\r
+# contain links (just like the HTML output) instead of page references.\r
+# This makes the output suitable for online browsing using WORD or other\r
+# programs which support those fields.\r
+# Note: wordpad (write) and others do not support links.\r
+\r
+RTF_HYPERLINKS = NO\r
+\r
+# Load style sheet definitions from file. Syntax is similar to doxygen's\r
+# config file, i.e. a series of assignments. You only have to provide\r
+# replacements, missing definitions are set to their default value.\r
+\r
+RTF_STYLESHEET_FILE =\r
+\r
+# Set optional variables used in the generation of an rtf document.\r
+# Syntax is similar to doxygen's config file.\r
+\r
+RTF_EXTENSIONS_FILE =\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the man page output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will\r
+# generate man pages\r
+\r
+GENERATE_MAN = NO\r
+\r
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.\r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
+# put in front of it. If left blank `man' will be used as the default path.\r
+\r
+MAN_OUTPUT = man\r
+\r
+# The MAN_EXTENSION tag determines the extension that is added to\r
+# the generated man pages (default is the subroutine's section .3)\r
+\r
+MAN_EXTENSION = .3\r
+\r
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,\r
+# then it will generate one additional man file for each entity\r
+# documented in the real man page(s). These additional files\r
+# only source the real man page, but without them the man command\r
+# would be unable to find the correct page. The default is NO.\r
+\r
+MAN_LINKS = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the XML output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_XML tag is set to YES Doxygen will\r
+# generate an XML file that captures the structure of\r
+# the code including all documentation.\r
+\r
+GENERATE_XML = NO\r
+\r
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.\r
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
+# put in front of it. If left blank `xml' will be used as the default path.\r
+\r
+XML_OUTPUT = xml\r
+\r
+# The XML_SCHEMA tag can be used to specify an XML schema,\r
+# which can be used by a validating XML parser to check the\r
+# syntax of the XML files.\r
+\r
+XML_SCHEMA =\r
+\r
+# The XML_DTD tag can be used to specify an XML DTD,\r
+# which can be used by a validating XML parser to check the\r
+# syntax of the XML files.\r
+\r
+XML_DTD =\r
+\r
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will\r
+# dump the program listings (including syntax highlighting\r
+# and cross-referencing information) to the XML output. Note that\r
+# enabling this will significantly increase the size of the XML output.\r
+\r
+XML_PROGRAMLISTING = YES\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options for the AutoGen Definitions output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will\r
+# generate an AutoGen Definitions (see autogen.sf.net) file\r
+# that captures the structure of the code including all\r
+# documentation. Note that this feature is still experimental\r
+# and incomplete at the moment.\r
+\r
+GENERATE_AUTOGEN_DEF = NO\r
+\r
+#---------------------------------------------------------------------------\r
+# configuration options related to the Perl module output\r
+#---------------------------------------------------------------------------\r
+\r
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will\r
+# generate a Perl module file that captures the structure of\r
+# the code including all documentation. Note that this\r
+# feature is still experimental and incomplete at the\r
+# moment.\r
+\r
+GENERATE_PERLMOD = NO\r
+\r
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate\r
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able\r
+# to generate PDF and DVI output from the Perl module output.\r
+\r
+PERLMOD_LATEX = NO\r
+\r
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be\r
+# nicely formatted so it can be parsed by a human reader.\r
+# This is useful\r
+# if you want to understand what is going on.\r
+# On the other hand, if this\r
+# tag is set to NO the size of the Perl module output will be much smaller\r
+# and Perl will parse it just the same.\r
+\r
+PERLMOD_PRETTY = YES\r
+\r
+# The names of the make variables in the generated doxyrules.make file\r
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.\r
+# This is useful so different doxyrules.make files included by the same\r
+# Makefile don't overwrite each other's variables.\r
+\r
+PERLMOD_MAKEVAR_PREFIX =\r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration options related to the preprocessor\r
+#---------------------------------------------------------------------------\r
+\r
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will\r
+# evaluate all C-preprocessor directives found in the sources and include\r
+# files.\r
+\r
+ENABLE_PREPROCESSING = YES\r
+\r
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro\r
+# names in the source code. If set to NO (the default) only conditional\r
+# compilation will be performed. Macro expansion can be done in a controlled\r
+# way by setting EXPAND_ONLY_PREDEF to YES.\r
+\r
+MACRO_EXPANSION = YES\r
+\r
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES\r
+# then the macro expansion is limited to the macros specified with the\r
+# PREDEFINED and EXPAND_AS_DEFINED tags.\r
+\r
+EXPAND_ONLY_PREDEF = YES\r
+\r
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files\r
+# pointed to by INCLUDE_PATH will be searched when a #include is found.\r
+\r
+SEARCH_INCLUDES = YES\r
+\r
+# The INCLUDE_PATH tag can be used to specify one or more directories that\r
+# contain include files that are not input files but should be processed by\r
+# the preprocessor.\r
+\r
+INCLUDE_PATH =\r
+\r
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard\r
+# patterns (like *.h and *.hpp) to filter out the header-files in the\r
+# directories. If left blank, the patterns specified with FILE_PATTERNS will\r
+# be used.\r
+\r
+INCLUDE_FILE_PATTERNS =\r
+\r
+# The PREDEFINED tag can be used to specify one or more macro names that\r
+# are defined before the preprocessor is started (similar to the -D option of\r
+# gcc). The argument of the tag is a list of macros of the form: name\r
+# or name=definition (no spaces). If the definition and the = are\r
+# omitted =1 is assumed. To prevent a macro definition from being\r
+# undefined via #undef or recursively expanded use the := operator\r
+# instead of the = operator.\r
+\r
+PREDEFINED = __DOXYGEN__ \\r
+ PROGMEM\r
+\r
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then\r
+# this tag can be used to specify a list of macro names that should be expanded.\r
+# The macro definition that is found in the sources will be used.\r
+# Use the PREDEFINED tag if you want to use a different macro definition that\r
+# overrules the definition found in the source code.\r
+\r
+EXPAND_AS_DEFINED =\r
+\r
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then\r
+# doxygen's preprocessor will remove all references to function-like macros\r
+# that are alone on a line, have an all uppercase name, and do not end with a\r
+# semicolon, because these will confuse the parser if not removed.\r
+\r
+SKIP_FUNCTION_MACROS = YES\r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration::additions related to external references\r
+#---------------------------------------------------------------------------\r
+\r
+# The TAGFILES option can be used to specify one or more tagfiles. For each\r
+# tag file the location of the external documentation should be added. The\r
+# format of a tag file without this location is as follows:\r
+#\r
+# TAGFILES = file1 file2 ...\r
+# Adding location for the tag files is done as follows:\r
+#\r
+# TAGFILES = file1=loc1 "file2 = loc2" ...\r
+# where "loc1" and "loc2" can be relative or absolute paths\r
+# or URLs. Note that each tag file must have a unique name (where the name does\r
+# NOT include the path). If a tag file is not located in the directory in which\r
+# doxygen is run, you must also specify the path to the tagfile here.\r
+\r
+TAGFILES =\r
+\r
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create\r
+# a tag file that is based on the input files it reads.\r
+\r
+GENERATE_TAGFILE =\r
+\r
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed\r
+# in the class index. If set to NO only the inherited external classes\r
+# will be listed.\r
+\r
+ALLEXTERNALS = NO\r
+\r
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed\r
+# in the modules index. If set to NO, only the current project's groups will\r
+# be listed.\r
+\r
+EXTERNAL_GROUPS = YES\r
+\r
+# The PERL_PATH should be the absolute path and name of the perl script\r
+# interpreter (i.e. the result of `which perl').\r
+\r
+PERL_PATH = /usr/bin/perl\r
+\r
+#---------------------------------------------------------------------------\r
+# Configuration options related to the dot tool\r
+#---------------------------------------------------------------------------\r
+\r
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will\r
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base\r
+# or super classes. Setting the tag to NO turns the diagrams off. Note that\r
+# this option also works with HAVE_DOT disabled, but it is recommended to\r
+# install and use dot, since it yields more powerful graphs.\r
+\r
+CLASS_DIAGRAMS = NO\r
+\r
+# You can define message sequence charts within doxygen comments using the \msc\r
+# command. Doxygen will then run the mscgen tool (see\r
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the\r
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where\r
+# the mscgen tool resides. If left empty the tool is assumed to be found in the\r
+# default search path.\r
+\r
+MSCGEN_PATH =\r
+\r
+# If set to YES, the inheritance and collaboration graphs will hide\r
+# inheritance and usage relations if the target is undocumented\r
+# or is not a class.\r
+\r
+HIDE_UNDOC_RELATIONS = YES\r
+\r
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is\r
+# available from the path. This tool is part of Graphviz, a graph visualization\r
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section\r
+# have no effect if this option is set to NO (the default)\r
+\r
+HAVE_DOT = NO\r
+\r
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is\r
+# allowed to run in parallel. When set to 0 (the default) doxygen will\r
+# base this on the number of processors available in the system. You can set it\r
+# explicitly to a value larger than 0 to get control over the balance\r
+# between CPU load and processing speed.\r
+\r
+DOT_NUM_THREADS = 0\r
+\r
+# By default doxygen will use the Helvetica font for all dot files that\r
+# doxygen generates. When you want a differently looking font you can specify\r
+# the font name using DOT_FONTNAME. You need to make sure dot is able to find\r
+# the font, which can be done by putting it in a standard location or by setting\r
+# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the\r
+# directory containing the font.\r
+\r
+DOT_FONTNAME = FreeSans\r
+\r
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.\r
+# The default size is 10pt.\r
+\r
+DOT_FONTSIZE = 10\r
+\r
+# By default doxygen will tell dot to use the Helvetica font.\r
+# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to\r
+# set the path where dot can find it.\r
+\r
+DOT_FONTPATH =\r
+\r
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen\r
+# will generate a graph for each documented class showing the direct and\r
+# indirect inheritance relations. Setting this tag to YES will force the\r
+# CLASS_DIAGRAMS tag to NO.\r
+\r
+CLASS_GRAPH = NO\r
+\r
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen\r
+# will generate a graph for each documented class showing the direct and\r
+# indirect implementation dependencies (inheritance, containment, and\r
+# class references variables) of the class with other documented classes.\r
+\r
+COLLABORATION_GRAPH = NO\r
+\r
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen\r
+# will generate a graph for groups, showing the direct groups dependencies\r
+\r
+GROUP_GRAPHS = NO\r
+\r
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and\r
+# collaboration diagrams in a style similar to the OMG's Unified Modeling\r
+# Language.\r
+\r
+UML_LOOK = NO\r
+\r
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside\r
+# the class node. If there are many fields or methods and many nodes the\r
+# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS\r
+# threshold limits the number of items for each type to make the size more\r
+# managable. Set this to 0 for no limit. Note that the threshold may be\r
+# exceeded by 50% before the limit is enforced.\r
+\r
+UML_LIMIT_NUM_FIELDS = 10\r
+\r
+# If set to YES, the inheritance and collaboration graphs will show the\r
+# relations between templates and their instances.\r
+\r
+TEMPLATE_RELATIONS = NO\r
+\r
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT\r
+# tags are set to YES then doxygen will generate a graph for each documented\r
+# file showing the direct and indirect include dependencies of the file with\r
+# other documented files.\r
+\r
+INCLUDE_GRAPH = NO\r
+\r
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and\r
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each\r
+# documented header file showing the documented files that directly or\r
+# indirectly include this file.\r
+\r
+INCLUDED_BY_GRAPH = NO\r
+\r
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then\r
+# doxygen will generate a call dependency graph for every global function\r
+# or class method. Note that enabling this option will significantly increase\r
+# the time of a run. So in most cases it will be better to enable call graphs\r
+# for selected functions only using the \callgraph command.\r
+\r
+CALL_GRAPH = NO\r
+\r
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then\r
+# doxygen will generate a caller dependency graph for every global function\r
+# or class method. Note that enabling this option will significantly increase\r
+# the time of a run. So in most cases it will be better to enable caller\r
+# graphs for selected functions only using the \callergraph command.\r
+\r
+CALLER_GRAPH = NO\r
+\r
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen\r
+# will generate a graphical hierarchy of all classes instead of a textual one.\r
+\r
+GRAPHICAL_HIERARCHY = NO\r
+\r
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES\r
+# then doxygen will show the dependencies a directory has on other directories\r
+# in a graphical way. The dependency relations are determined by the #include\r
+# relations between the files in the directories.\r
+\r
+DIRECTORY_GRAPH = NO\r
+\r
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images\r
+# generated by dot. Possible values are svg, png, jpg, or gif.\r
+# If left blank png will be used. If you choose svg you need to set\r
+# HTML_FILE_EXTENSION to xhtml in order to make the SVG files\r
+# visible in IE 9+ (other browsers do not have this requirement).\r
+\r
+DOT_IMAGE_FORMAT = png\r
+\r
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to\r
+# enable generation of interactive SVG images that allow zooming and panning.\r
+# Note that this requires a modern browser other than Internet Explorer.\r
+# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you\r
+# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files\r
+# visible. Older versions of IE do not have SVG support.\r
+\r
+INTERACTIVE_SVG = NO\r
+\r
+# The tag DOT_PATH can be used to specify the path where the dot tool can be\r
+# found. If left blank, it is assumed the dot tool can be found in the path.\r
+\r
+DOT_PATH =\r
+\r
+# The DOTFILE_DIRS tag can be used to specify one or more directories that\r
+# contain dot files that are included in the documentation (see the\r
+# \dotfile command).\r
+\r
+DOTFILE_DIRS =\r
+\r
+# The MSCFILE_DIRS tag can be used to specify one or more directories that\r
+# contain msc files that are included in the documentation (see the\r
+# \mscfile command).\r
+\r
+MSCFILE_DIRS =\r
+\r
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of\r
+# nodes that will be shown in the graph. If the number of nodes in a graph\r
+# becomes larger than this value, doxygen will truncate the graph, which is\r
+# visualized by representing a node as a red box. Note that doxygen if the\r
+# number of direct children of the root node in a graph is already larger than\r
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note\r
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.\r
+\r
+DOT_GRAPH_MAX_NODES = 15\r
+\r
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the\r
+# graphs generated by dot. A depth value of 3 means that only nodes reachable\r
+# from the root by following a path via at most 3 edges will be shown. Nodes\r
+# that lay further from the root node will be omitted. Note that setting this\r
+# option to 1 or 2 may greatly reduce the computation time needed for large\r
+# code bases. Also note that the size of a graph can be further restricted by\r
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.\r
+\r
+MAX_DOT_GRAPH_DEPTH = 2\r
+\r
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent\r
+# background. This is disabled by default, because dot on Windows does not\r
+# seem to support this out of the box. Warning: Depending on the platform used,\r
+# enabling this option may lead to badly anti-aliased labels on the edges of\r
+# a graph (i.e. they become hard to read).\r
+\r
+DOT_TRANSPARENT = YES\r
+\r
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output\r
+# files in one run (i.e. multiple -o and -T options on the command line). This\r
+# makes dot run faster, but since only newer versions of dot (>1.8.10)\r
+# support this, this feature is disabled by default.\r
+\r
+DOT_MULTI_TARGETS = NO\r
+\r
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will\r
+# generate a legend page explaining the meaning of the various boxes and\r
+# arrows in the dot generated graphs.\r
+\r
+GENERATE_LEGEND = YES\r
+\r
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will\r
+# remove the intermediate dot files that are used to generate\r
+# the various graphs.\r
+\r
+DOT_CLEANUP = YES\r
projects / pub / USBasp.git / commitdiff