-#define DEBUG_PRINTF(...) /*printf(__VA_ARGS__)*/
-
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \file
- * The uIP TCP/IP stack code.
- * \author Adam Dunkels <adam@dunkels.com>
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- * products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uip.c,v 1.15 2008/10/15 08:08:32 adamdunkels Exp $
- *
- */
-
-/*
- * uIP is a small implementation of the IP, UDP and TCP protocols (as
- * well as some basic ICMP stuff). The implementation couples the IP,
- * UDP, TCP and the application layers very tightly. To keep the size
- * of the compiled code down, this code frequently uses the goto
- * statement. While it would be possible to break the uip_process()
- * function into many smaller functions, this would increase the code
- * size because of the overhead of parameter passing and the fact that
- * the optimier would not be as efficient.
- *
- * The principle is that we have a small buffer, called the uip_buf,
- * in which the device driver puts an incoming packet. The TCP/IP
- * stack parses the headers in the packet, and calls the
- * application. If the remote host has sent data to the application,
- * this data is present in the uip_buf and the application read the
- * data from there. It is up to the application to put this data into
- * a byte stream if needed. The application will not be fed with data
- * that is out of sequence.
- *
- * If the application whishes to send data to the peer, it should put
- * its data into the uip_buf. The uip_appdata pointer points to the
- * first available byte. The TCP/IP stack will calculate the
- * checksums, and fill in the necessary header fields and finally send
- * the packet back to the peer.
-*/
-
-#include "uip.h"
-#include "uipopt.h"
-#include "uip_arp.h"
-
-#if !UIP_CONF_IPV6 /* If UIP_CONF_IPV6 is defined, we compile the
- uip6.c file instead of this one. Therefore
- this #ifndef removes the entire compilation
- output of the uip.c file */
-
-
-#if UIP_CONF_IPV6
-#include "net/uip-neighbor.h"
-#endif /* UIP_CONF_IPV6 */
-
-#include <string.h>
-
-/*---------------------------------------------------------------------------*/
-/* Variable definitions. */
-
-
-/* The IP address of this host. If it is defined to be fixed (by
- setting UIP_FIXEDADDR to 1 in uipopt.h), the address is set
- here. Otherwise, the address */
-#if UIP_FIXEDADDR > 0
-const uip_ipaddr_t uip_hostaddr =
- { UIP_IPADDR0, UIP_IPADDR1, UIP_IPADDR2, UIP_IPADDR3 };
-const uip_ipaddr_t uip_draddr =
- { UIP_DRIPADDR0, UIP_DRIPADDR1, UIP_DRIPADDR2, UIP_DRIPADDR3 };
-const uip_ipaddr_t uip_netmask =
- { UIP_NETMASK0, UIP_NETMASK1, UIP_NETMASK2, UIP_NETMASK3 };
-#else
-uip_ipaddr_t uip_hostaddr, uip_draddr, uip_netmask;
-#endif /* UIP_FIXEDADDR */
-
-const uip_ipaddr_t uip_broadcast_addr =
-#if UIP_CONF_IPV6
- { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } };
-#else /* UIP_CONF_IPV6 */
- { { 0xff, 0xff, 0xff, 0xff } };
-#endif /* UIP_CONF_IPV6 */
-const uip_ipaddr_t uip_all_zeroes_addr = { { 0x0, /* rest is 0 */ } };
-
-#if UIP_FIXEDETHADDR
-const struct uip_eth_addr uip_ethaddr = {{UIP_ETHADDR0,
- UIP_ETHADDR1,
- UIP_ETHADDR2,
- UIP_ETHADDR3,
- UIP_ETHADDR4,
- UIP_ETHADDR5}};
-#else
-struct uip_eth_addr uip_ethaddr = {{0,0,0,0,0,0}};
-#endif
-
-#ifndef UIP_CONF_EXTERNAL_BUFFER
-u8_t uip_buf[UIP_BUFSIZE + 2]; /* The packet buffer that contains
- incoming packets. */
-#endif /* UIP_CONF_EXTERNAL_BUFFER */
-
-void *uip_appdata; /* The uip_appdata pointer points to
- application data. */
-void *uip_sappdata; /* The uip_appdata pointer points to
- the application data which is to
- be sent. */
-#if UIP_URGDATA > 0
-void *uip_urgdata; /* The uip_urgdata pointer points to
- urgent data (out-of-band data), if
- present. */
-u16_t uip_urglen, uip_surglen;
-#endif /* UIP_URGDATA > 0 */
-
-u16_t uip_len, uip_slen;
- /* The uip_len is either 8 or 16 bits,
- depending on the maximum packet
- size. */
-
-u8_t uip_flags; /* The uip_flags variable is used for
- communication between the TCP/IP stack
- and the application program. */
-struct uip_conn *uip_conn; /* uip_conn always points to the current
- connection. */
-
-struct uip_conn uip_conns[UIP_CONNS];
- /* The uip_conns array holds all TCP
- connections. */
-u16_t uip_listenports[UIP_LISTENPORTS];
- /* The uip_listenports list all currently
- listning ports. */
-#if UIP_UDP
-struct uip_udp_conn *uip_udp_conn;
-struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
-#endif /* UIP_UDP */
-
-static u16_t ipid; /* Ths ipid variable is an increasing
- number that is used for the IP ID
- field. */
-
-void uip_setipid(u16_t id) { ipid = id; }
-
-static u8_t iss[4]; /* The iss variable is used for the TCP
- initial sequence number. */
-
-#if UIP_ACTIVE_OPEN
-static u16_t lastport; /* Keeps track of the last port used for
- a new connection. */
-#endif /* UIP_ACTIVE_OPEN */
-
-/* Temporary variables. */
-u8_t uip_acc32[4];
-static u8_t c, opt;
-static u16_t tmp16;
-
-/* Structures and definitions. */
-#define TCP_FIN 0x01
-#define TCP_SYN 0x02
-#define TCP_RST 0x04
-#define TCP_PSH 0x08
-#define TCP_ACK 0x10
-#define TCP_URG 0x20
-#define TCP_CTL 0x3f
-
-#define TCP_OPT_END 0 /* End of TCP options list */
-#define TCP_OPT_NOOP 1 /* "No-operation" TCP option */
-#define TCP_OPT_MSS 2 /* Maximum segment size TCP option */
-
-#define TCP_OPT_MSS_LEN 4 /* Length of TCP MSS option. */
-
-#define ICMP_ECHO_REPLY 0
-#define ICMP_ECHO 8
-
-#define ICMP_DEST_UNREACHABLE 3
-#define ICMP_PORT_UNREACHABLE 3
-
-#define ICMP6_ECHO_REPLY 129
-#define ICMP6_ECHO 128
-#define ICMP6_NEIGHBOR_SOLICITATION 135
-#define ICMP6_NEIGHBOR_ADVERTISEMENT 136
-
-#define ICMP6_FLAG_S (1 << 6)
-
-#define ICMP6_OPTION_SOURCE_LINK_ADDRESS 1
-#define ICMP6_OPTION_TARGET_LINK_ADDRESS 2
-
-
-/* Macros. */
-#define BUF ((struct uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN])
-#define FBUF ((struct uip_tcpip_hdr *)&uip_reassbuf[0])
-#define ICMPBUF ((struct uip_icmpip_hdr *)&uip_buf[UIP_LLH_LEN])
-#define UDPBUF ((struct uip_udpip_hdr *)&uip_buf[UIP_LLH_LEN])
-
-
-#if UIP_STATISTICS == 1
-struct uip_stats uip_stat;
-#define UIP_STAT(s) s
-#else
-#define UIP_STAT(s)
-#endif /* UIP_STATISTICS == 1 */
-
-#if UIP_LOGGING == 1
-#include <stdio.h>
-void uip_log(char *msg);
-#define UIP_LOG(m) uip_log(m)
-#else
-#define UIP_LOG(m)
-#endif /* UIP_LOGGING == 1 */
-
-#if ! UIP_ARCH_ADD32
-void
-uip_add32(u8_t *op32, u16_t op16)
-{
- uip_acc32[3] = op32[3] + (op16 & 0xff);
- uip_acc32[2] = op32[2] + (op16 >> 8);
- uip_acc32[1] = op32[1];
- uip_acc32[0] = op32[0];
-
- if(uip_acc32[2] < (op16 >> 8)) {
- ++uip_acc32[1];
- if(uip_acc32[1] == 0) {
- ++uip_acc32[0];
- }
- }
-
-
- if(uip_acc32[3] < (op16 & 0xff)) {
- ++uip_acc32[2];
- if(uip_acc32[2] == 0) {
- ++uip_acc32[1];
- if(uip_acc32[1] == 0) {
- ++uip_acc32[0];
- }
- }
- }
-}
-
-#endif /* UIP_ARCH_ADD32 */
-
-#if ! UIP_ARCH_CHKSUM
-/*---------------------------------------------------------------------------*/
-static u16_t
-chksum(u16_t sum, const u8_t *data, u16_t len)
-{
- u16_t t;
- const u8_t *dataptr;
- const u8_t *last_byte;
-
- dataptr = data;
- last_byte = data + len - 1;
-
- while(dataptr < last_byte) { /* At least two more bytes */
- t = (dataptr[0] << 8) + dataptr[1];
- sum += t;
- if(sum < t) {
- sum++; /* carry */
- }
- dataptr += 2;
- }
-
- if(dataptr == last_byte) {
- t = (dataptr[0] << 8) + 0;
- sum += t;
- if(sum < t) {
- sum++; /* carry */
- }
- }
-
- /* Return sum in host byte order. */
- return sum;
-}
-/*---------------------------------------------------------------------------*/
-u16_t
-uip_chksum(u16_t *data, u16_t len)
-{
- return htons(chksum(0, (u8_t *)data, len));
-}
-/*---------------------------------------------------------------------------*/
-#ifndef UIP_ARCH_IPCHKSUM
-u16_t
-uip_ipchksum(void)
-{
- u16_t sum;
-
- sum = chksum(0, &uip_buf[UIP_LLH_LEN], UIP_IPH_LEN);
- DEBUG_PRINTF("uip_ipchksum: sum 0x%04x\n", sum);
- return (sum == 0) ? 0xffff : htons(sum);
-}
-#endif
-/*---------------------------------------------------------------------------*/
-static u16_t
-upper_layer_chksum(u8_t proto)
-{
- u16_t upper_layer_len;
- u16_t sum;
-
-#if UIP_CONF_IPV6
- upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]);
-#else /* UIP_CONF_IPV6 */
- upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;
-#endif /* UIP_CONF_IPV6 */
-
- /* First sum pseudoheader. */
-
- /* IP protocol and length fields. This addition cannot carry. */
- sum = upper_layer_len + proto;
- /* Sum IP source and destination addresses. */
- sum = chksum(sum, (u8_t *)&BUF->srcipaddr, 2 * sizeof(uip_ipaddr_t));
-
- /* Sum TCP header and data. */
- sum = chksum(sum, &uip_buf[UIP_IPH_LEN + UIP_LLH_LEN],
- upper_layer_len);
-
- return (sum == 0) ? 0xffff : htons(sum);
-}
-/*---------------------------------------------------------------------------*/
-#if UIP_CONF_IPV6
-u16_t
-uip_icmp6chksum(void)
-{
- return upper_layer_chksum(UIP_PROTO_ICMP6);
-
-}
-#endif /* UIP_CONF_IPV6 */
-/*---------------------------------------------------------------------------*/
-u16_t
-uip_tcpchksum(void)
-{
- return upper_layer_chksum(UIP_PROTO_TCP);
-}
-/*---------------------------------------------------------------------------*/
-#if UIP_UDP_CHECKSUMS
-u16_t
-uip_udpchksum(void)
-{
- return upper_layer_chksum(UIP_PROTO_UDP);
-}
-#endif /* UIP_UDP_CHECKSUMS */
-#endif /* UIP_ARCH_CHKSUM */
-/*---------------------------------------------------------------------------*/
-void
-uip_init(void)
-{
- for(c = 0; c < UIP_LISTENPORTS; ++c) {
- uip_listenports[c] = 0;
- }
- for(c = 0; c < UIP_CONNS; ++c) {
- uip_conns[c].tcpstateflags = UIP_CLOSED;
- }
-#if UIP_ACTIVE_OPEN
- lastport = 1024;
-#endif /* UIP_ACTIVE_OPEN */
-
-#if UIP_UDP
- for(c = 0; c < UIP_UDP_CONNS; ++c) {
- uip_udp_conns[c].lport = 0;
- }
-#endif /* UIP_UDP */
-
-
- /* IPv4 initialization. */
-#if UIP_FIXEDADDR == 0
- /* uip_hostaddr[0] = uip_hostaddr[1] = 0;*/
-#endif /* UIP_FIXEDADDR */
-
-}
-/*---------------------------------------------------------------------------*/
-#if UIP_ACTIVE_OPEN
-struct uip_conn *
-uip_connect(uip_ipaddr_t *ripaddr, u16_t rport)
-{
- register struct uip_conn *conn, *cconn;
-
- /* Find an unused local port. */
- again:
- ++lastport;
-
- if(lastport >= 32000) {
- lastport = 4096;
- }
-
- /* Check if this port is already in use, and if so try to find
- another one. */
- for(c = 0; c < UIP_CONNS; ++c) {
- conn = &uip_conns[c];
- if(conn->tcpstateflags != UIP_CLOSED &&
- conn->lport == htons(lastport)) {
- goto again;
- }
- }
-
- conn = 0;
- for(c = 0; c < UIP_CONNS; ++c) {
- cconn = &uip_conns[c];
- if(cconn->tcpstateflags == UIP_CLOSED) {
- conn = cconn;
- break;
- }
- if(cconn->tcpstateflags == UIP_TIME_WAIT) {
- if(conn == 0 ||
- cconn->timer > conn->timer) {
- conn = cconn;
- }
- }
- }
-
- if(conn == 0) {
- return 0;
- }
-
- conn->tcpstateflags = UIP_SYN_SENT;
-
- conn->snd_nxt[0] = iss[0];
- conn->snd_nxt[1] = iss[1];
- conn->snd_nxt[2] = iss[2];
- conn->snd_nxt[3] = iss[3];
-
- conn->initialmss = conn->mss = UIP_TCP_MSS;
-
- conn->len = 1; /* TCP length of the SYN is one. */
- conn->nrtx = 0;
- conn->timer = 1; /* Send the SYN next time around. */
- conn->rto = UIP_RTO;
- conn->sa = 0;
- conn->sv = 16; /* Initial value of the RTT variance. */
- conn->lport = htons(lastport);
- conn->rport = rport;
- uip_ipaddr_copy(&conn->ripaddr, ripaddr);
-
- return conn;
-}
-#endif /* UIP_ACTIVE_OPEN */
-/*---------------------------------------------------------------------------*/
-#if UIP_UDP
-struct uip_udp_conn *
-uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport)
-{
- register struct uip_udp_conn *conn;
-
- /* Find an unused local port. */
- again:
- ++lastport;
-
- if(lastport >= 32000) {
- lastport = 4096;
- }
-
- for(c = 0; c < UIP_UDP_CONNS; ++c) {
- if(uip_udp_conns[c].lport == htons(lastport)) {
- goto again;
- }
- }
-
-
- conn = 0;
- for(c = 0; c < UIP_UDP_CONNS; ++c) {
- if(uip_udp_conns[c].lport == 0) {
- conn = &uip_udp_conns[c];
- break;
- }
- }
-
- if(conn == 0) {
- return 0;
- }
-
- conn->lport = HTONS(lastport);
- conn->rport = rport;
- if(ripaddr == NULL) {
- memset(&conn->ripaddr, 0, sizeof(uip_ipaddr_t));
- } else {
- uip_ipaddr_copy(&conn->ripaddr, ripaddr);
- }
- conn->ttl = UIP_TTL;
-
- return conn;
-}
-#endif /* UIP_UDP */
-/*---------------------------------------------------------------------------*/
-void
-uip_unlisten(u16_t port)
-{
- for(c = 0; c < UIP_LISTENPORTS; ++c) {
- if(uip_listenports[c] == port) {
- uip_listenports[c] = 0;
- return;
- }
- }
-}
-/*---------------------------------------------------------------------------*/
-void
-uip_listen(u16_t port)
-{
- for(c = 0; c < UIP_LISTENPORTS; ++c) {
- if(uip_listenports[c] == 0) {
- uip_listenports[c] = port;
- return;
- }
- }
-}
-/*---------------------------------------------------------------------------*/
-/* XXX: IP fragment reassembly: not well-tested. */
-
-#if UIP_REASSEMBLY && !UIP_CONF_IPV6
-#define UIP_REASS_BUFSIZE (UIP_BUFSIZE - UIP_LLH_LEN)
-static u8_t uip_reassbuf[UIP_REASS_BUFSIZE];
-static u8_t uip_reassbitmap[UIP_REASS_BUFSIZE / (8 * 8)];
-static const u8_t bitmap_bits[8] = {0xff, 0x7f, 0x3f, 0x1f,
- 0x0f, 0x07, 0x03, 0x01};
-static u16_t uip_reasslen;
-static u8_t uip_reassflags;
-#define UIP_REASS_FLAG_LASTFRAG 0x01
-static u8_t uip_reasstmr;
-
-#define IP_MF 0x20
-
-static u8_t
-uip_reass(void)
-{
- u16_t offset, len;
- u16_t i;
-
- /* If ip_reasstmr is zero, no packet is present in the buffer, so we
- write the IP header of the fragment into the reassembly
- buffer. The timer is updated with the maximum age. */
- if(uip_reasstmr == 0) {
- memcpy(uip_reassbuf, &BUF->vhl, UIP_IPH_LEN);
- uip_reasstmr = UIP_REASS_MAXAGE;
- uip_reassflags = 0;
- /* Clear the bitmap. */
- memset(uip_reassbitmap, 0, sizeof(uip_reassbitmap));
- }
-
- /* Check if the incoming fragment matches the one currently present
- in the reasembly buffer. If so, we proceed with copying the
- fragment into the buffer. */
- if(BUF->srcipaddr[0] == FBUF->srcipaddr[0] &&
- BUF->srcipaddr[1] == FBUF->srcipaddr[1] &&
- BUF->destipaddr[0] == FBUF->destipaddr[0] &&
- BUF->destipaddr[1] == FBUF->destipaddr[1] &&
- BUF->ipid[0] == FBUF->ipid[0] &&
- BUF->ipid[1] == FBUF->ipid[1]) {
-
- len = (BUF->len[0] << 8) + BUF->len[1] - (BUF->vhl & 0x0f) * 4;
- offset = (((BUF->ipoffset[0] & 0x3f) << 8) + BUF->ipoffset[1]) * 8;
-
- /* If the offset or the offset + fragment length overflows the
- reassembly buffer, we discard the entire packet. */
- if(offset > UIP_REASS_BUFSIZE ||
- offset + len > UIP_REASS_BUFSIZE) {
- uip_reasstmr = 0;
- goto nullreturn;
- }
-
- /* Copy the fragment into the reassembly buffer, at the right
- offset. */
- memcpy(&uip_reassbuf[UIP_IPH_LEN + offset],
- (char *)BUF + (int)((BUF->vhl & 0x0f) * 4),
- len);
-
- /* Update the bitmap. */
- if(offset / (8 * 8) == (offset + len) / (8 * 8)) {
- /* If the two endpoints are in the same byte, we only update
- that byte. */
-
- uip_reassbitmap[offset / (8 * 8)] |=
- bitmap_bits[(offset / 8 ) & 7] &
- ~bitmap_bits[((offset + len) / 8 ) & 7];
- } else {
- /* If the two endpoints are in different bytes, we update the
- bytes in the endpoints and fill the stuff inbetween with
- 0xff. */
- uip_reassbitmap[offset / (8 * 8)] |=
- bitmap_bits[(offset / 8 ) & 7];
- for(i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i) {
- uip_reassbitmap[i] = 0xff;
- }
- uip_reassbitmap[(offset + len) / (8 * 8)] |=
- ~bitmap_bits[((offset + len) / 8 ) & 7];
- }
-
- /* If this fragment has the More Fragments flag set to zero, we
- know that this is the last fragment, so we can calculate the
- size of the entire packet. We also set the
- IP_REASS_FLAG_LASTFRAG flag to indicate that we have received
- the final fragment. */
-
- if((BUF->ipoffset[0] & IP_MF) == 0) {
- uip_reassflags |= UIP_REASS_FLAG_LASTFRAG;
- uip_reasslen = offset + len;
- }
-
- /* Finally, we check if we have a full packet in the buffer. We do
- this by checking if we have the last fragment and if all bits
- in the bitmap are set. */
- if(uip_reassflags & UIP_REASS_FLAG_LASTFRAG) {
- /* Check all bytes up to and including all but the last byte in
- the bitmap. */
- for(i = 0; i < uip_reasslen / (8 * 8) - 1; ++i) {
- if(uip_reassbitmap[i] != 0xff) {
- goto nullreturn;
- }
- }
- /* Check the last byte in the bitmap. It should contain just the
- right amount of bits. */
- if(uip_reassbitmap[uip_reasslen / (8 * 8)] !=
- (u8_t)~bitmap_bits[uip_reasslen / 8 & 7]) {
- goto nullreturn;
- }
-
- /* If we have come this far, we have a full packet in the
- buffer, so we allocate a pbuf and copy the packet into it. We
- also reset the timer. */
- uip_reasstmr = 0;
- memcpy(BUF, FBUF, uip_reasslen);
-
- /* Pretend to be a "normal" (i.e., not fragmented) IP packet
- from now on. */
- BUF->ipoffset[0] = BUF->ipoffset[1] = 0;
- BUF->len[0] = uip_reasslen >> 8;
- BUF->len[1] = uip_reasslen & 0xff;
- BUF->ipchksum = 0;
- BUF->ipchksum = ~(uip_ipchksum());
-
- return uip_reasslen;
- }
- }
-
- nullreturn:
- return 0;
-}
-#endif /* UIP_REASSEMBLY */
-/*---------------------------------------------------------------------------*/
-static void
-uip_add_rcv_nxt(u16_t n)
-{
- uip_add32(uip_conn->rcv_nxt, n);
- uip_conn->rcv_nxt[0] = uip_acc32[0];
- uip_conn->rcv_nxt[1] = uip_acc32[1];
- uip_conn->rcv_nxt[2] = uip_acc32[2];
- uip_conn->rcv_nxt[3] = uip_acc32[3];
-}
-/*---------------------------------------------------------------------------*/
-void
-uip_process(u8_t flag)
-{
- register struct uip_conn *uip_connr = uip_conn;
-
-#if UIP_UDP
- if(flag == UIP_UDP_SEND_CONN) {
- goto udp_send;
- }
-#endif /* UIP_UDP */
-
- uip_sappdata = uip_appdata = &uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN];
-
- /* Check if we were invoked because of a poll request for a
- particular connection. */
- if(flag == UIP_POLL_REQUEST) {
- if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED &&
- !uip_outstanding(uip_connr)) {
- uip_len = uip_slen = 0;
- uip_flags = UIP_POLL;
- UIP_APPCALL();
- goto appsend;
- }
- goto drop;
-
- /* Check if we were invoked because of the perodic timer fireing. */
- } else if(flag == UIP_TIMER) {
-#if UIP_REASSEMBLY
- if(uip_reasstmr != 0) {
- --uip_reasstmr;
- }
-#endif /* UIP_REASSEMBLY */
- /* Increase the initial sequence number. */
- if(++iss[3] == 0) {
- if(++iss[2] == 0) {
- if(++iss[1] == 0) {
- ++iss[0];
- }
- }
- }
-
- /* Reset the length variables. */
- uip_len = 0;
- uip_slen = 0;
-
- /* Check if the connection is in a state in which we simply wait
- for the connection to time out. If so, we increase the
- connection's timer and remove the connection if it times
- out. */
- if(uip_connr->tcpstateflags == UIP_TIME_WAIT ||
- uip_connr->tcpstateflags == UIP_FIN_WAIT_2) {
- ++(uip_connr->timer);
- if(uip_connr->timer == UIP_TIME_WAIT_TIMEOUT) {
- uip_connr->tcpstateflags = UIP_CLOSED;
- }
- } else if(uip_connr->tcpstateflags != UIP_CLOSED) {
- /* If the connection has outstanding data, we increase the
- connection's timer and see if it has reached the RTO value
- in which case we retransmit. */
- if(uip_outstanding(uip_connr)) {
- if(uip_connr->timer-- == 0) {
- if(uip_connr->nrtx == UIP_MAXRTX ||
- ((uip_connr->tcpstateflags == UIP_SYN_SENT ||
- uip_connr->tcpstateflags == UIP_SYN_RCVD) &&
- uip_connr->nrtx == UIP_MAXSYNRTX)) {
- uip_connr->tcpstateflags = UIP_CLOSED;
-
- /* We call UIP_APPCALL() with uip_flags set to
- UIP_TIMEDOUT to inform the application that the
- connection has timed out. */
- uip_flags = UIP_TIMEDOUT;
- UIP_APPCALL();
-
- /* We also send a reset packet to the remote host. */
- BUF->flags = TCP_RST | TCP_ACK;
- goto tcp_send_nodata;
- }
-
- /* Exponential backoff. */
- uip_connr->timer = UIP_RTO << (uip_connr->nrtx > 4?
- 4:
- uip_connr->nrtx);
- ++(uip_connr->nrtx);
-
- /* Ok, so we need to retransmit. We do this differently
- depending on which state we are in. In ESTABLISHED, we
- call upon the application so that it may prepare the
- data for the retransmit. In SYN_RCVD, we resend the
- SYNACK that we sent earlier and in LAST_ACK we have to
- retransmit our FINACK. */
- UIP_STAT(++uip_stat.tcp.rexmit);
- switch(uip_connr->tcpstateflags & UIP_TS_MASK) {
- case UIP_SYN_RCVD:
- /* In the SYN_RCVD state, we should retransmit our
- SYNACK. */
- goto tcp_send_synack;
-
-#if UIP_ACTIVE_OPEN
- case UIP_SYN_SENT:
- /* In the SYN_SENT state, we retransmit out SYN. */
- BUF->flags = 0;
- goto tcp_send_syn;
-#endif /* UIP_ACTIVE_OPEN */
-
- case UIP_ESTABLISHED:
- /* In the ESTABLISHED state, we call upon the application
- to do the actual retransmit after which we jump into
- the code for sending out the packet (the apprexmit
- label). */
- uip_flags = UIP_REXMIT;
- UIP_APPCALL();
- goto apprexmit;
-
- case UIP_FIN_WAIT_1:
- case UIP_CLOSING:
- case UIP_LAST_ACK:
- /* In all these states we should retransmit a FINACK. */
- goto tcp_send_finack;
-
- }
- }
- } else if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED) {
- /* If there was no need for a retransmission, we poll the
- application for new data. */
- uip_len = uip_slen = 0;
- uip_flags = UIP_POLL;
- UIP_APPCALL();
- goto appsend;
- }
- }
- goto drop;
- }
-#if UIP_UDP
- if(flag == UIP_UDP_TIMER) {
- if(uip_udp_conn->lport != 0) {
- uip_conn = NULL;
- uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
- uip_len = uip_slen = 0;
- uip_flags = UIP_POLL;
- UIP_UDP_APPCALL();
- goto udp_send;
- } else {
- goto drop;
- }
- }
-#endif
-
- /* This is where the input processing starts. */
- UIP_STAT(++uip_stat.ip.recv);
-
- /* Start of IP input header processing code. */
-
-#if UIP_CONF_IPV6
- /* Check validity of the IP header. */
- if((BUF->vtc & 0xf0) != 0x60) { /* IP version and header length. */
- UIP_STAT(++uip_stat.ip.drop);
- UIP_STAT(++uip_stat.ip.vhlerr);
- UIP_LOG("ipv6: invalid version.");
- goto drop;
- }
-#else /* UIP_CONF_IPV6 */
- /* Check validity of the IP header. */
- if(BUF->vhl != 0x45) { /* IP version and header length. */
- UIP_STAT(++uip_stat.ip.drop);
- UIP_STAT(++uip_stat.ip.vhlerr);
- UIP_LOG("ip: invalid version or header length.");
- goto drop;
- }
-#endif /* UIP_CONF_IPV6 */
-
- /* Check the size of the packet. If the size reported to us in
- uip_len is smaller the size reported in the IP header, we assume
- that the packet has been corrupted in transit. If the size of
- uip_len is larger than the size reported in the IP packet header,
- the packet has been padded and we set uip_len to the correct
- value.. */
-
- if((BUF->len[0] << 8) + BUF->len[1] <= uip_len) {
- uip_len = (BUF->len[0] << 8) + BUF->len[1];
-#if UIP_CONF_IPV6
- uip_len += 40; /* The length reported in the IPv6 header is the
- length of the payload that follows the
- header. However, uIP uses the uip_len variable
- for holding the size of the entire packet,
- including the IP header. For IPv4 this is not a
- problem as the length field in the IPv4 header
- contains the length of the entire packet. But
- for IPv6 we need to add the size of the IPv6
- header (40 bytes). */
-#endif /* UIP_CONF_IPV6 */
- } else {
- UIP_LOG("ip: packet shorter than reported in IP header.");
- goto drop;
- }
-
-#if !UIP_CONF_IPV6
- /* Check the fragment flag. */
- if((BUF->ipoffset[0] & 0x3f) != 0 ||
- BUF->ipoffset[1] != 0) {
-#if UIP_REASSEMBLY
- uip_len = uip_reass();
- if(uip_len == 0) {
- goto drop;
- }
-#else /* UIP_REASSEMBLY */
- UIP_STAT(++uip_stat.ip.drop);
- UIP_STAT(++uip_stat.ip.fragerr);
- UIP_LOG("ip: fragment dropped.");
- goto drop;
-#endif /* UIP_REASSEMBLY */
- }
-#endif /* UIP_CONF_IPV6 */
-
- if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) {
- /* If we are configured to use ping IP address configuration and
- hasn't been assigned an IP address yet, we accept all ICMP
- packets. */
-#if UIP_PINGADDRCONF && !UIP_CONF_IPV6
- if(BUF->proto == UIP_PROTO_ICMP) {
- UIP_LOG("ip: possible ping config packet received.");
- goto icmp_input;
- } else {
- UIP_LOG("ip: packet dropped since no address assigned.");
- goto drop;
- }
-#endif /* UIP_PINGADDRCONF */
-
- } else {
- /* If IP broadcast support is configured, we check for a broadcast
- UDP packet, which may be destined to us. */
-#if UIP_BROADCAST
- DEBUG_PRINTF("UDP IP checksum 0x%04x\n", uip_ipchksum());
- if(BUF->proto == UIP_PROTO_UDP &&
- uip_ipaddr_cmp(&BUF->destipaddr, &uip_broadcast_addr)
- /*&&
- uip_ipchksum() == 0xffff*/) {
- goto udp_input;
- }
-#endif /* UIP_BROADCAST */
-
- /* Check if the packet is destined for our IP address. */
-#if !UIP_CONF_IPV6
- if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr)) {
- UIP_STAT(++uip_stat.ip.drop);
- goto drop;
- }
-#else /* UIP_CONF_IPV6 */
- /* For IPv6, packet reception is a little trickier as we need to
- make sure that we listen to certain multicast addresses (all
- hosts multicast address, and the solicited-node multicast
- address) as well. However, we will cheat here and accept all
- multicast packets that are sent to the ff02::/16 addresses. */
- if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr) &&
- BUF->destipaddr.u16[0] != HTONS(0xff02)) {
- UIP_STAT(++uip_stat.ip.drop);
- goto drop;
- }
-#endif /* UIP_CONF_IPV6 */
- }
-
-#if !UIP_CONF_IPV6
- if(uip_ipchksum() != 0xffff) { /* Compute and check the IP header
- checksum. */
- UIP_STAT(++uip_stat.ip.drop);
- UIP_STAT(++uip_stat.ip.chkerr);
- UIP_LOG("ip: bad checksum.");
- goto drop;
- }
-#endif /* UIP_CONF_IPV6 */
-
- if(BUF->proto == UIP_PROTO_TCP) { /* Check for TCP packet. If so,
- proceed with TCP input
- processing. */
- goto tcp_input;
- }
-
-#if UIP_UDP
- if(BUF->proto == UIP_PROTO_UDP) {
- goto udp_input;
- }
-#endif /* UIP_UDP */
-
-#if !UIP_CONF_IPV6
- /* ICMPv4 processing code follows. */
- if(BUF->proto != UIP_PROTO_ICMP) { /* We only allow ICMP packets from
- here. */
- UIP_STAT(++uip_stat.ip.drop);
- UIP_STAT(++uip_stat.ip.protoerr);
- UIP_LOG("ip: neither tcp nor icmp.");
- goto drop;
- }
-
-#if UIP_PINGADDRCONF
- icmp_input:
-#endif /* UIP_PINGADDRCONF */
- UIP_STAT(++uip_stat.icmp.recv);
-
- /* ICMP echo (i.e., ping) processing. This is simple, we only change
- the ICMP type from ECHO to ECHO_REPLY and adjust the ICMP
- checksum before we return the packet. */
- if(ICMPBUF->type != ICMP_ECHO) {
- UIP_STAT(++uip_stat.icmp.drop);
- UIP_STAT(++uip_stat.icmp.typeerr);
- UIP_LOG("icmp: not icmp echo.");
- goto drop;
- }
-
- /* If we are configured to use ping IP address assignment, we use
- the destination IP address of this ping packet and assign it to
- ourself. */
-#if UIP_PINGADDRCONF
- if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) {
- uip_hostaddr = BUF->destipaddr;
- }
-#endif /* UIP_PINGADDRCONF */
-
- ICMPBUF->type = ICMP_ECHO_REPLY;
-
- if(ICMPBUF->icmpchksum >= HTONS(0xffff - (ICMP_ECHO << 8))) {
- ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8) + 1;
- } else {
- ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8);
- }
-
- /* Swap IP addresses. */
- uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
- uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-
- UIP_STAT(++uip_stat.icmp.sent);
- BUF->ttl = UIP_TTL;
- goto ip_send_nolen;
-
- /* End of IPv4 input header processing code. */
-#else /* !UIP_CONF_IPV6 */
-
- /* This is IPv6 ICMPv6 processing code. */
- DEBUG_PRINTF("icmp6_input: length %d\n", uip_len);
-
- if(BUF->proto != UIP_PROTO_ICMP6) { /* We only allow ICMPv6 packets from
- here. */
- UIP_STAT(++uip_stat.ip.drop);
- UIP_STAT(++uip_stat.ip.protoerr);
- UIP_LOG("ip: neither tcp nor icmp6.");
- goto drop;
- }
-
- UIP_STAT(++uip_stat.icmp.recv);
-
- /* If we get a neighbor solicitation for our address we should send
- a neighbor advertisement message back. */
- if(ICMPBUF->type == ICMP6_NEIGHBOR_SOLICITATION) {
- if(uip_ipaddr_cmp(&ICMPBUF->icmp6data, &uip_hostaddr)) {
-
- if(ICMPBUF->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS) {
- /* Save the sender's address in our neighbor list. */
- uip_neighbor_add(&ICMPBUF->srcipaddr, &(ICMPBUF->options[2]));
- }
-
- /* We should now send a neighbor advertisement back to where the
- neighbor solicication came from. */
- ICMPBUF->type = ICMP6_NEIGHBOR_ADVERTISEMENT;
- ICMPBUF->flags = ICMP6_FLAG_S; /* Solicited flag. */
-
- ICMPBUF->reserved1 = ICMPBUF->reserved2 = ICMPBUF->reserved3 = 0;
-
- uip_ipaddr_copy(&ICMPBUF->destipaddr, &ICMPBUF->srcipaddr);
- uip_ipaddr_copy(&ICMPBUF->srcipaddr, &uip_hostaddr);
- ICMPBUF->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS;
- ICMPBUF->options[1] = 1; /* Options length, 1 = 8 bytes. */
- memcpy(&(ICMPBUF->options[2]), &uip_ethaddr, sizeof(uip_ethaddr));
- ICMPBUF->icmpchksum = 0;
- ICMPBUF->icmpchksum = ~uip_icmp6chksum();
-
- goto send;
-
- }
- goto drop;
- } else if(ICMPBUF->type == ICMP6_ECHO) {
- /* ICMP echo (i.e., ping) processing. This is simple, we only
- change the ICMP type from ECHO to ECHO_REPLY and update the
- ICMP checksum before we return the packet. */
-
- ICMPBUF->type = ICMP6_ECHO_REPLY;
-
- uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
- uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
- ICMPBUF->icmpchksum = 0;
- ICMPBUF->icmpchksum = ~uip_icmp6chksum();
-
- UIP_STAT(++uip_stat.icmp.sent);
- goto send;
- } else {
- DEBUG_PRINTF("Unknown icmp6 message type %d\n", ICMPBUF->type);
- UIP_STAT(++uip_stat.icmp.drop);
- UIP_STAT(++uip_stat.icmp.typeerr);
- UIP_LOG("icmp: unknown ICMP message.");
- goto drop;
- }
-
- /* End of IPv6 ICMP processing. */
-
-#endif /* !UIP_CONF_IPV6 */
-
-#if UIP_UDP
- /* UDP input processing. */
- udp_input:
- /* UDP processing is really just a hack. We don't do anything to the
- UDP/IP headers, but let the UDP application do all the hard
- work. If the application sets uip_slen, it has a packet to
- send. */
-#if UIP_UDP_CHECKSUMS
- uip_len = uip_len - UIP_IPUDPH_LEN;
- uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
- if(UDPBUF->udpchksum != 0 && uip_udpchksum() != 0xffff) {
- UIP_STAT(++uip_stat.udp.drop);
- UIP_STAT(++uip_stat.udp.chkerr);
- UIP_LOG("udp: bad checksum.");
- goto drop;
- }
-#else /* UIP_UDP_CHECKSUMS */
- uip_len = uip_len - UIP_IPUDPH_LEN;
-#endif /* UIP_UDP_CHECKSUMS */
-
- /* Demultiplex this UDP packet between the UDP "connections". */
- for(uip_udp_conn = &uip_udp_conns[0];
- uip_udp_conn < &uip_udp_conns[UIP_UDP_CONNS];
- ++uip_udp_conn) {
- /* If the local UDP port is non-zero, the connection is considered
- to be used. If so, the local port number is checked against the
- destination port number in the received packet. If the two port
- numbers match, the remote port number is checked if the
- connection is bound to a remote port. Finally, if the
- connection is bound to a remote IP address, the source IP
- address of the packet is checked. */
- if(uip_udp_conn->lport != 0 &&
- UDPBUF->destport == uip_udp_conn->lport &&
- (uip_udp_conn->rport == 0 ||
- UDPBUF->srcport == uip_udp_conn->rport) &&
- (uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_all_zeroes_addr) ||
- uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_broadcast_addr) ||
- uip_ipaddr_cmp(&BUF->srcipaddr, &uip_udp_conn->ripaddr))) {
- goto udp_found;
- }
- }
- UIP_LOG("udp: no matching connection found");
-#if UIP_CONF_ICMP_DEST_UNREACH && !UIP_CONF_IPV6
- /* Copy fields from packet header into payload of this ICMP packet. */
- memcpy(&(ICMPBUF->payload[0]), ICMPBUF, UIP_IPH_LEN + 8);
-
- /* Set the ICMP type and code. */
- ICMPBUF->type = ICMP_DEST_UNREACHABLE;
- ICMPBUF->icode = ICMP_PORT_UNREACHABLE;
-
- /* Calculate the ICMP checksum. */
- ICMPBUF->icmpchksum = 0;
- ICMPBUF->icmpchksum = ~uip_chksum((u16_t *)&(ICMPBUF->type), 36);
-
- /* Set the IP destination address to be the source address of the
- original packet. */
- uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
-
- /* Set our IP address as the source address. */
- uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-
- /* The size of the ICMP destination unreachable packet is 36 + the
- size of the IP header (20) = 56. */
- uip_len = 36 + UIP_IPH_LEN;
- ICMPBUF->len[0] = 0;
- ICMPBUF->len[1] = (u8_t)uip_len;
- ICMPBUF->ttl = UIP_TTL;
- ICMPBUF->proto = UIP_PROTO_ICMP;
-
- goto ip_send_nolen;
-#else /* UIP_CONF_ICMP_DEST_UNREACH */
- goto drop;
-#endif /* UIP_CONF_ICMP_DEST_UNREACH */
-
- udp_found:
- uip_conn = NULL;
- uip_flags = UIP_NEWDATA;
- uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
- uip_slen = 0;
- UIP_UDP_APPCALL();
-
- udp_send:
- if(uip_slen == 0) {
- goto drop;
- }
- uip_len = uip_slen + UIP_IPUDPH_LEN;
-
-#if UIP_CONF_IPV6
- /* For IPv6, the IP length field does not include the IPv6 IP header
- length. */
- BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);
- BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);
-#else /* UIP_CONF_IPV6 */
- BUF->len[0] = (uip_len >> 8);
- BUF->len[1] = (uip_len & 0xff);
-#endif /* UIP_CONF_IPV6 */
-
- BUF->ttl = uip_udp_conn->ttl;
- BUF->proto = UIP_PROTO_UDP;
-
- UDPBUF->udplen = HTONS(uip_slen + UIP_UDPH_LEN);
- UDPBUF->udpchksum = 0;
-
- BUF->srcport = uip_udp_conn->lport;
- BUF->destport = uip_udp_conn->rport;
-
- uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
- uip_ipaddr_copy(&BUF->destipaddr, &uip_udp_conn->ripaddr);
-
- uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPTCPH_LEN];
-
-#if UIP_UDP_CHECKSUMS
- /* Calculate UDP checksum. */
- UDPBUF->udpchksum = ~(uip_udpchksum());
- if(UDPBUF->udpchksum == 0) {
- UDPBUF->udpchksum = 0xffff;
- }
-#endif /* UIP_UDP_CHECKSUMS */
-
- goto ip_send_nolen;
-#endif /* UIP_UDP */
-
- /* TCP input processing. */
- tcp_input:
- UIP_STAT(++uip_stat.tcp.recv);
-
- /* Start of TCP input header processing code. */
-
- if(uip_tcpchksum() != 0xffff) { /* Compute and check the TCP
- checksum. */
- UIP_STAT(++uip_stat.tcp.drop);
- UIP_STAT(++uip_stat.tcp.chkerr);
- UIP_LOG("tcp: bad checksum.");
- goto drop;
- }
-
- /* Demultiplex this segment. */
- /* First check any active connections. */
- for(uip_connr = &uip_conns[0]; uip_connr <= &uip_conns[UIP_CONNS - 1];
- ++uip_connr) {
- if(uip_connr->tcpstateflags != UIP_CLOSED &&
- BUF->destport == uip_connr->lport &&
- BUF->srcport == uip_connr->rport &&
- uip_ipaddr_cmp(&BUF->srcipaddr, &uip_connr->ripaddr)) {
- goto found;
- }
- }
-
- /* If we didn't find and active connection that expected the packet,
- either this packet is an old duplicate, or this is a SYN packet
- destined for a connection in LISTEN. If the SYN flag isn't set,
- it is an old packet and we send a RST. */
- if((BUF->flags & TCP_CTL) != TCP_SYN) {
- goto reset;
- }
-
- tmp16 = BUF->destport;
- /* Next, check listening connections. */
- for(c = 0; c < UIP_LISTENPORTS; ++c) {
- if(tmp16 == uip_listenports[c]) {
- goto found_listen;
- }
- }
-
- /* No matching connection found, so we send a RST packet. */
- UIP_STAT(++uip_stat.tcp.synrst);
-
- reset:
- /* We do not send resets in response to resets. */
- if(BUF->flags & TCP_RST) {
- goto drop;
- }
-
- UIP_STAT(++uip_stat.tcp.rst);
-
- BUF->flags = TCP_RST | TCP_ACK;
- uip_len = UIP_IPTCPH_LEN;
- BUF->tcpoffset = 5 << 4;
-
- /* Flip the seqno and ackno fields in the TCP header. */
- c = BUF->seqno[3];
- BUF->seqno[3] = BUF->ackno[3];
- BUF->ackno[3] = c;
-
- c = BUF->seqno[2];
- BUF->seqno[2] = BUF->ackno[2];
- BUF->ackno[2] = c;
-
- c = BUF->seqno[1];
- BUF->seqno[1] = BUF->ackno[1];
- BUF->ackno[1] = c;
-
- c = BUF->seqno[0];
- BUF->seqno[0] = BUF->ackno[0];
- BUF->ackno[0] = c;
-
- /* We also have to increase the sequence number we are
- acknowledging. If the least significant byte overflowed, we need
- to propagate the carry to the other bytes as well. */
- if(++BUF->ackno[3] == 0) {
- if(++BUF->ackno[2] == 0) {
- if(++BUF->ackno[1] == 0) {
- ++BUF->ackno[0];
- }
- }
- }
-
- /* Swap port numbers. */
- tmp16 = BUF->srcport;
- BUF->srcport = BUF->destport;
- BUF->destport = tmp16;
-
- /* Swap IP addresses. */
- uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
- uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-
- /* And send out the RST packet! */
- goto tcp_send_noconn;
-
- /* This label will be jumped to if we matched the incoming packet
- with a connection in LISTEN. In that case, we should create a new
- connection and send a SYNACK in return. */
- found_listen:
- /* First we check if there are any connections avaliable. Unused
- connections are kept in the same table as used connections, but
- unused ones have the tcpstate set to CLOSED. Also, connections in
- TIME_WAIT are kept track of and we'll use the oldest one if no
- CLOSED connections are found. Thanks to Eddie C. Dost for a very
- nice algorithm for the TIME_WAIT search. */
- uip_connr = 0;
- for(c = 0; c < UIP_CONNS; ++c) {
- if(uip_conns[c].tcpstateflags == UIP_CLOSED) {
- uip_connr = &uip_conns[c];
- break;
- }
- if(uip_conns[c].tcpstateflags == UIP_TIME_WAIT) {
- if(uip_connr == 0 ||
- uip_conns[c].timer > uip_connr->timer) {
- uip_connr = &uip_conns[c];
- }
- }
- }
-
- if(uip_connr == 0) {
- /* All connections are used already, we drop packet and hope that
- the remote end will retransmit the packet at a time when we
- have more spare connections. */
- UIP_STAT(++uip_stat.tcp.syndrop);
- UIP_LOG("tcp: found no unused connections.");
- goto drop;
- }
- uip_conn = uip_connr;
-
- /* Fill in the necessary fields for the new connection. */
- uip_connr->rto = uip_connr->timer = UIP_RTO;
- uip_connr->sa = 0;
- uip_connr->sv = 4;
- uip_connr->nrtx = 0;
- uip_connr->lport = BUF->destport;
- uip_connr->rport = BUF->srcport;
- uip_ipaddr_copy(&uip_connr->ripaddr, &BUF->srcipaddr);
- uip_connr->tcpstateflags = UIP_SYN_RCVD;
-
- uip_connr->snd_nxt[0] = iss[0];
- uip_connr->snd_nxt[1] = iss[1];
- uip_connr->snd_nxt[2] = iss[2];
- uip_connr->snd_nxt[3] = iss[3];
- uip_connr->len = 1;
-
- /* rcv_nxt should be the seqno from the incoming packet + 1. */
- uip_connr->rcv_nxt[3] = BUF->seqno[3];
- uip_connr->rcv_nxt[2] = BUF->seqno[2];
- uip_connr->rcv_nxt[1] = BUF->seqno[1];
- uip_connr->rcv_nxt[0] = BUF->seqno[0];
- uip_add_rcv_nxt(1);
-
- /* Parse the TCP MSS option, if present. */
- if((BUF->tcpoffset & 0xf0) > 0x50) {
- for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) {
- opt = uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + c];
- if(opt == TCP_OPT_END) {
- /* End of options. */
- break;
- } else if(opt == TCP_OPT_NOOP) {
- ++c;
- /* NOP option. */
- } else if(opt == TCP_OPT_MSS &&
- uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) {
- /* An MSS option with the right option length. */
- tmp16 = ((u16_t)uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) |
- (u16_t)uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + 3 + c];
- uip_connr->initialmss = uip_connr->mss =
- tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16;
-
- /* And we are done processing options. */
- break;
- } else {
- /* All other options have a length field, so that we easily
- can skip past them. */
- if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) {
- /* If the length field is zero, the options are malformed
- and we don't process them further. */
- break;
- }
- c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];
- }
- }
- }
-
- /* Our response will be a SYNACK. */
-#if UIP_ACTIVE_OPEN
- tcp_send_synack:
- BUF->flags = TCP_ACK;
-
- tcp_send_syn:
- BUF->flags |= TCP_SYN;
-#else /* UIP_ACTIVE_OPEN */
- tcp_send_synack:
- BUF->flags = TCP_SYN | TCP_ACK;
-#endif /* UIP_ACTIVE_OPEN */
-
- /* We send out the TCP Maximum Segment Size option with our
- SYNACK. */
- BUF->optdata[0] = TCP_OPT_MSS;
- BUF->optdata[1] = TCP_OPT_MSS_LEN;
- BUF->optdata[2] = (UIP_TCP_MSS) / 256;
- BUF->optdata[3] = (UIP_TCP_MSS) & 255;
- uip_len = UIP_IPTCPH_LEN + TCP_OPT_MSS_LEN;
- BUF->tcpoffset = ((UIP_TCPH_LEN + TCP_OPT_MSS_LEN) / 4) << 4;
- goto tcp_send;
-
- /* This label will be jumped to if we found an active connection. */
- found:
- uip_conn = uip_connr;
- uip_flags = 0;
- /* We do a very naive form of TCP reset processing; we just accept
- any RST and kill our connection. We should in fact check if the
- sequence number of this reset is wihtin our advertised window
- before we accept the reset. */
- if(BUF->flags & TCP_RST) {
- uip_connr->tcpstateflags = UIP_CLOSED;
- UIP_LOG("tcp: got reset, aborting connection.");
- uip_flags = UIP_ABORT;
- UIP_APPCALL();
- goto drop;
- }
- /* Calculate the length of the data, if the application has sent
- any data to us. */
- c = (BUF->tcpoffset >> 4) << 2;
- /* uip_len will contain the length of the actual TCP data. This is
- calculated by subtracing the length of the TCP header (in
- c) and the length of the IP header (20 bytes). */
- uip_len = uip_len - c - UIP_IPH_LEN;
-
- /* First, check if the sequence number of the incoming packet is
- what we're expecting next. If not, we send out an ACK with the
- correct numbers in. */
- if(!(((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_SYN_SENT) &&
- ((BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)))) {
- if((uip_len > 0 || ((BUF->flags & (TCP_SYN | TCP_FIN)) != 0)) &&
- (BUF->seqno[0] != uip_connr->rcv_nxt[0] ||
- BUF->seqno[1] != uip_connr->rcv_nxt[1] ||
- BUF->seqno[2] != uip_connr->rcv_nxt[2] ||
- BUF->seqno[3] != uip_connr->rcv_nxt[3])) {
- goto tcp_send_ack;
- }
- }
-
- /* Next, check if the incoming segment acknowledges any outstanding
- data. If so, we update the sequence number, reset the length of
- the outstanding data, calculate RTT estimations, and reset the
- retransmission timer. */
- if((BUF->flags & TCP_ACK) && uip_outstanding(uip_connr)) {
- uip_add32(uip_connr->snd_nxt, uip_connr->len);
-
- if(BUF->ackno[0] == uip_acc32[0] &&
- BUF->ackno[1] == uip_acc32[1] &&
- BUF->ackno[2] == uip_acc32[2] &&
- BUF->ackno[3] == uip_acc32[3]) {
- /* Update sequence number. */
- uip_connr->snd_nxt[0] = uip_acc32[0];
- uip_connr->snd_nxt[1] = uip_acc32[1];
- uip_connr->snd_nxt[2] = uip_acc32[2];
- uip_connr->snd_nxt[3] = uip_acc32[3];
-
- /* Do RTT estimation, unless we have done retransmissions. */
- if(uip_connr->nrtx == 0) {
- signed char m;
- m = uip_connr->rto - uip_connr->timer;
- /* This is taken directly from VJs original code in his paper */
- m = m - (uip_connr->sa >> 3);
- uip_connr->sa += m;
- if(m < 0) {
- m = -m;
- }
- m = m - (uip_connr->sv >> 2);
- uip_connr->sv += m;
- uip_connr->rto = (uip_connr->sa >> 3) + uip_connr->sv;
-
- }
- /* Set the acknowledged flag. */
- uip_flags = UIP_ACKDATA;
- /* Reset the retransmission timer. */
- uip_connr->timer = uip_connr->rto;
-
- /* Reset length of outstanding data. */
- uip_connr->len = 0;
- }
-
- }
-
- /* Do different things depending on in what state the connection is. */
- switch(uip_connr->tcpstateflags & UIP_TS_MASK) {
- /* CLOSED and LISTEN are not handled here. CLOSE_WAIT is not
- implemented, since we force the application to close when the
- peer sends a FIN (hence the application goes directly from
- ESTABLISHED to LAST_ACK). */
- case UIP_SYN_RCVD:
- /* In SYN_RCVD we have sent out a SYNACK in response to a SYN, and
- we are waiting for an ACK that acknowledges the data we sent
- out the last time. Therefore, we want to have the UIP_ACKDATA
- flag set. If so, we enter the ESTABLISHED state. */
- if(uip_flags & UIP_ACKDATA) {
- uip_connr->tcpstateflags = UIP_ESTABLISHED;
- uip_flags = UIP_CONNECTED;
- uip_connr->len = 0;
- if(uip_len > 0) {
- uip_flags |= UIP_NEWDATA;
- uip_add_rcv_nxt(uip_len);
- }
- uip_slen = 0;
- UIP_APPCALL();
- goto appsend;
- }
- goto drop;
-#if UIP_ACTIVE_OPEN
- case UIP_SYN_SENT:
- /* In SYN_SENT, we wait for a SYNACK that is sent in response to
- our SYN. The rcv_nxt is set to sequence number in the SYNACK
- plus one, and we send an ACK. We move into the ESTABLISHED
- state. */
- if((uip_flags & UIP_ACKDATA) &&
- (BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)) {
-
- /* Parse the TCP MSS option, if present. */
- if((BUF->tcpoffset & 0xf0) > 0x50) {
- for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) {
- opt = uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + c];
- if(opt == TCP_OPT_END) {
- /* End of options. */
- break;
- } else if(opt == TCP_OPT_NOOP) {
- ++c;
- /* NOP option. */
- } else if(opt == TCP_OPT_MSS &&
- uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) {
- /* An MSS option with the right option length. */
- tmp16 = (uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) |
- uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 3 + c];
- uip_connr->initialmss =
- uip_connr->mss = tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16;
-
- /* And we are done processing options. */
- break;
- } else {
- /* All other options have a length field, so that we easily
- can skip past them. */
- if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) {
- /* If the length field is zero, the options are malformed
- and we don't process them further. */
- break;
- }
- c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];
- }
- }
- }
- uip_connr->tcpstateflags = UIP_ESTABLISHED;
- uip_connr->rcv_nxt[0] = BUF->seqno[0];
- uip_connr->rcv_nxt[1] = BUF->seqno[1];
- uip_connr->rcv_nxt[2] = BUF->seqno[2];
- uip_connr->rcv_nxt[3] = BUF->seqno[3];
- uip_add_rcv_nxt(1);
- uip_flags = UIP_CONNECTED | UIP_NEWDATA;
- uip_connr->len = 0;
- uip_len = 0;
- uip_slen = 0;
- UIP_APPCALL();
- goto appsend;
- }
- /* Inform the application that the connection failed */
- uip_flags = UIP_ABORT;
- UIP_APPCALL();
- /* The connection is closed after we send the RST */
- uip_conn->tcpstateflags = UIP_CLOSED;
- goto reset;
-#endif /* UIP_ACTIVE_OPEN */
-
- case UIP_ESTABLISHED:
- /* In the ESTABLISHED state, we call upon the application to feed
- data into the uip_buf. If the UIP_ACKDATA flag is set, the
- application should put new data into the buffer, otherwise we are
- retransmitting an old segment, and the application should put that
- data into the buffer.
-
- If the incoming packet is a FIN, we should close the connection on
- this side as well, and we send out a FIN and enter the LAST_ACK
- state. We require that there is no outstanding data; otherwise the
- sequence numbers will be screwed up. */
-
- if(BUF->flags & TCP_FIN && !(uip_connr->tcpstateflags & UIP_STOPPED)) {
- if(uip_outstanding(uip_connr)) {
- goto drop;
- }
- uip_add_rcv_nxt(1 + uip_len);
- uip_flags |= UIP_CLOSE;
- if(uip_len > 0) {
- uip_flags |= UIP_NEWDATA;
- }
- UIP_APPCALL();
- uip_connr->len = 1;
- uip_connr->tcpstateflags = UIP_LAST_ACK;
- uip_connr->nrtx = 0;
- tcp_send_finack:
- BUF->flags = TCP_FIN | TCP_ACK;
- goto tcp_send_nodata;
- }
-
- /* Check the URG flag. If this is set, the segment carries urgent
- data that we must pass to the application. */
- if((BUF->flags & TCP_URG) != 0) {
-#if UIP_URGDATA > 0
- uip_urglen = (BUF->urgp[0] << 8) | BUF->urgp[1];
- if(uip_urglen > uip_len) {
- /* There is more urgent data in the next segment to come. */
- uip_urglen = uip_len;
- }
- uip_add_rcv_nxt(uip_urglen);
- uip_len -= uip_urglen;
- uip_urgdata = uip_appdata;
- uip_appdata += uip_urglen;
- } else {
- uip_urglen = 0;
-#else /* UIP_URGDATA > 0 */
- uip_appdata = ((char *)uip_appdata) + ((BUF->urgp[0] << 8) | BUF->urgp[1]);
- uip_len -= (BUF->urgp[0] << 8) | BUF->urgp[1];
-#endif /* UIP_URGDATA > 0 */
- }
-
- /* If uip_len > 0 we have TCP data in the packet, and we flag this
- by setting the UIP_NEWDATA flag and update the sequence number
- we acknowledge. If the application has stopped the dataflow
- using uip_stop(), we must not accept any data packets from the
- remote host. */
- if(uip_len > 0 && !(uip_connr->tcpstateflags & UIP_STOPPED)) {
- uip_flags |= UIP_NEWDATA;
- uip_add_rcv_nxt(uip_len);
- }
-
- /* Check if the available buffer space advertised by the other end
- is smaller than the initial MSS for this connection. If so, we
- set the current MSS to the window size to ensure that the
- application does not send more data than the other end can
- handle.
-
- If the remote host advertises a zero window, we set the MSS to
- the initial MSS so that the application will send an entire MSS
- of data. This data will not be acknowledged by the receiver,
- and the application will retransmit it. This is called the
- "persistent timer" and uses the retransmission mechanim.
- */
- tmp16 = ((u16_t)BUF->wnd[0] << 8) + (u16_t)BUF->wnd[1];
- if(tmp16 > uip_connr->initialmss ||
- tmp16 == 0) {
- tmp16 = uip_connr->initialmss;
- }
- uip_connr->mss = tmp16;
-
- /* If this packet constitutes an ACK for outstanding data (flagged
- by the UIP_ACKDATA flag, we should call the application since it
- might want to send more data. If the incoming packet had data
- from the peer (as flagged by the UIP_NEWDATA flag), the
- application must also be notified.
-
- When the application is called, the global variable uip_len
- contains the length of the incoming data. The application can
- access the incoming data through the global pointer
- uip_appdata, which usually points UIP_IPTCPH_LEN + UIP_LLH_LEN
- bytes into the uip_buf array.
-
- If the application wishes to send any data, this data should be
- put into the uip_appdata and the length of the data should be
- put into uip_len. If the application don't have any data to
- send, uip_len must be set to 0. */
- if(uip_flags & (UIP_NEWDATA | UIP_ACKDATA)) {
- uip_slen = 0;
- UIP_APPCALL();
-
- appsend:
-
- if(uip_flags & UIP_ABORT) {
- uip_slen = 0;
- uip_connr->tcpstateflags = UIP_CLOSED;
- BUF->flags = TCP_RST | TCP_ACK;
- goto tcp_send_nodata;
- }
-
- if(uip_flags & UIP_CLOSE) {
- uip_slen = 0;
- uip_connr->len = 1;
- uip_connr->tcpstateflags = UIP_FIN_WAIT_1;
- uip_connr->nrtx = 0;
- BUF->flags = TCP_FIN | TCP_ACK;
- goto tcp_send_nodata;
- }
-
- /* If uip_slen > 0, the application has data to be sent. */
- if(uip_slen > 0) {
-
- /* If the connection has acknowledged data, the contents of
- the ->len variable should be discarded. */
- if((uip_flags & UIP_ACKDATA) != 0) {
- uip_connr->len = 0;
- }
-
- /* If the ->len variable is non-zero the connection has
- already data in transit and cannot send anymore right
- now. */
- if(uip_connr->len == 0) {
-
- /* The application cannot send more than what is allowed by
- the mss (the minumum of the MSS and the available
- window). */
- if(uip_slen > uip_connr->mss) {
- uip_slen = uip_connr->mss;
- }
-
- /* Remember how much data we send out now so that we know
- when everything has been acknowledged. */
- uip_connr->len = uip_slen;
- } else {
-
- /* If the application already had unacknowledged data, we
- make sure that the application does not send (i.e.,
- retransmit) out more than it previously sent out. */
- uip_slen = uip_connr->len;
- }
- }
- uip_connr->nrtx = 0;
- apprexmit:
- uip_appdata = uip_sappdata;
-
- /* If the application has data to be sent, or if the incoming
- packet had new data in it, we must send out a packet. */
- if(uip_slen > 0 && uip_connr->len > 0) {
- /* Add the length of the IP and TCP headers. */
- uip_len = uip_connr->len + UIP_TCPIP_HLEN;
- /* We always set the ACK flag in response packets. */
- BUF->flags = TCP_ACK | TCP_PSH;
- /* Send the packet. */
- goto tcp_send_noopts;
- }
- /* If there is no data to send, just send out a pure ACK if
- there is newdata. */
- if(uip_flags & UIP_NEWDATA) {
- uip_len = UIP_TCPIP_HLEN;
- BUF->flags = TCP_ACK;
- goto tcp_send_noopts;
- }
- }
- goto drop;
- case UIP_LAST_ACK:
- /* We can close this connection if the peer has acknowledged our
- FIN. This is indicated by the UIP_ACKDATA flag. */
- if(uip_flags & UIP_ACKDATA) {
- uip_connr->tcpstateflags = UIP_CLOSED;
- uip_flags = UIP_CLOSE;
- UIP_APPCALL();
- }
- break;
-
- case UIP_FIN_WAIT_1:
- /* The application has closed the connection, but the remote host
- hasn't closed its end yet. Thus we do nothing but wait for a
- FIN from the other side. */
- if(uip_len > 0) {
- uip_add_rcv_nxt(uip_len);
- }
- if(BUF->flags & TCP_FIN) {
- if(uip_flags & UIP_ACKDATA) {
- uip_connr->tcpstateflags = UIP_TIME_WAIT;
- uip_connr->timer = 0;
- uip_connr->len = 0;
- } else {
- uip_connr->tcpstateflags = UIP_CLOSING;
- }
- uip_add_rcv_nxt(1);
- uip_flags = UIP_CLOSE;
- UIP_APPCALL();
- goto tcp_send_ack;
- } else if(uip_flags & UIP_ACKDATA) {
- uip_connr->tcpstateflags = UIP_FIN_WAIT_2;
- uip_connr->len = 0;
- goto drop;
- }
- if(uip_len > 0) {
- goto tcp_send_ack;
- }
- goto drop;
-
- case UIP_FIN_WAIT_2:
- if(uip_len > 0) {
- uip_add_rcv_nxt(uip_len);
- }
- if(BUF->flags & TCP_FIN) {
- uip_connr->tcpstateflags = UIP_TIME_WAIT;
- uip_connr->timer = 0;
- uip_add_rcv_nxt(1);
- uip_flags = UIP_CLOSE;
- UIP_APPCALL();
- goto tcp_send_ack;
- }
- if(uip_len > 0) {
- goto tcp_send_ack;
- }
- goto drop;
-
- case UIP_TIME_WAIT:
- goto tcp_send_ack;
-
- case UIP_CLOSING:
- if(uip_flags & UIP_ACKDATA) {
- uip_connr->tcpstateflags = UIP_TIME_WAIT;
- uip_connr->timer = 0;
- }
- }
- goto drop;
-
- /* We jump here when we are ready to send the packet, and just want
- to set the appropriate TCP sequence numbers in the TCP header. */
- tcp_send_ack:
- BUF->flags = TCP_ACK;
-
- tcp_send_nodata:
- uip_len = UIP_IPTCPH_LEN;
-
- tcp_send_noopts:
- BUF->tcpoffset = (UIP_TCPH_LEN / 4) << 4;
-
- /* We're done with the input processing. We are now ready to send a
- reply. Our job is to fill in all the fields of the TCP and IP
- headers before calculating the checksum and finally send the
- packet. */
- tcp_send:
- BUF->ackno[0] = uip_connr->rcv_nxt[0];
- BUF->ackno[1] = uip_connr->rcv_nxt[1];
- BUF->ackno[2] = uip_connr->rcv_nxt[2];
- BUF->ackno[3] = uip_connr->rcv_nxt[3];
-
- BUF->seqno[0] = uip_connr->snd_nxt[0];
- BUF->seqno[1] = uip_connr->snd_nxt[1];
- BUF->seqno[2] = uip_connr->snd_nxt[2];
- BUF->seqno[3] = uip_connr->snd_nxt[3];
-
- BUF->proto = UIP_PROTO_TCP;
-
- BUF->srcport = uip_connr->lport;
- BUF->destport = uip_connr->rport;
-
- uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
- uip_ipaddr_copy(&BUF->destipaddr, &uip_connr->ripaddr);
-
- if(uip_connr->tcpstateflags & UIP_STOPPED) {
- /* If the connection has issued uip_stop(), we advertise a zero
- window so that the remote host will stop sending data. */
- BUF->wnd[0] = BUF->wnd[1] = 0;
- } else {
- BUF->wnd[0] = ((UIP_RECEIVE_WINDOW) >> 8);
- BUF->wnd[1] = ((UIP_RECEIVE_WINDOW) & 0xff);
- }
-
- tcp_send_noconn:
- BUF->ttl = UIP_TTL;
-#if UIP_CONF_IPV6
- /* For IPv6, the IP length field does not include the IPv6 IP header
- length. */
- BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);
- BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);
-#else /* UIP_CONF_IPV6 */
- BUF->len[0] = (uip_len >> 8);
- BUF->len[1] = (uip_len & 0xff);
-#endif /* UIP_CONF_IPV6 */
-
- BUF->urgp[0] = BUF->urgp[1] = 0;
-
- /* Calculate TCP checksum. */
- BUF->tcpchksum = 0;
- BUF->tcpchksum = ~(uip_tcpchksum());
-
- ip_send_nolen:
-#if UIP_CONF_IPV6
- BUF->vtc = 0x60;
- BUF->tcflow = 0x00;
- BUF->flow = 0x00;
-#else /* UIP_CONF_IPV6 */
- BUF->vhl = 0x45;
- BUF->tos = 0;
- BUF->ipoffset[0] = BUF->ipoffset[1] = 0;
- ++ipid;
- BUF->ipid[0] = ipid >> 8;
- BUF->ipid[1] = ipid & 0xff;
- /* Calculate IP checksum. */
- BUF->ipchksum = 0;
- BUF->ipchksum = ~(uip_ipchksum());
- DEBUG_PRINTF("uip ip_send_nolen: chkecum 0x%04x\n", uip_ipchksum());
-#endif /* UIP_CONF_IPV6 */
- UIP_STAT(++uip_stat.tcp.sent);
-#if UIP_CONF_IPV6
- send:
-#endif /* UIP_CONF_IPV6 */
- DEBUG_PRINTF("Sending packet with length %d (%d)\n", uip_len,
- (BUF->len[0] << 8) | BUF->len[1]);
-
- UIP_STAT(++uip_stat.ip.sent);
- /* Return and let the caller do the actual transmission. */
- uip_flags = 0;
- return;
-
- drop:
- uip_len = 0;
- uip_flags = 0;
- return;
-}
-/*---------------------------------------------------------------------------*/
-u16_t
-htons(u16_t val)
-{
- return HTONS(val);
-}
-
-u32_t
-htonl(u32_t val)
-{
- return HTONL(val);
-}
-/*---------------------------------------------------------------------------*/
-void
-uip_send(const void *data, int len)
-{
- int copylen;
-#define MIN(a,b) ((a) < (b)? (a): (b))
- copylen = MIN(len, UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN -
- (int)((char *)uip_sappdata - (char *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]));
- if(copylen > 0) {
- uip_slen = copylen;
- if(data != uip_sappdata) {
- memcpy(uip_sappdata, (data), uip_slen);
- }
- }
-}
-/*---------------------------------------------------------------------------*/
-/** @} */
-#endif /* UIP_CONF_IPV6 */
+#define DEBUG_PRINTF(...) /*printf(__VA_ARGS__)*/\r
+\r
+/**\r
+ * \addtogroup uip\r
+ * @{\r
+ */\r
+\r
+/**\r
+ * \file\r
+ * The uIP TCP/IP stack code.\r
+ * \author Adam Dunkels <adam@dunkels.com>\r
+ */\r
+\r
+/*\r
+ * Copyright (c) 2001-2003, Adam Dunkels.\r
+ * All rights reserved.\r
+ *\r
+ * Redistribution and use in source and binary forms, with or without\r
+ * modification, are permitted provided that the following conditions\r
+ * are met:\r
+ * 1. Redistributions of source code must retain the above copyright\r
+ * notice, this list of conditions and the following disclaimer.\r
+ * 2. Redistributions in binary form must reproduce the above copyright\r
+ * notice, this list of conditions and the following disclaimer in the\r
+ * documentation and/or other materials provided with the distribution.\r
+ * 3. The name of the author may not be used to endorse or promote\r
+ * products derived from this software without specific prior\r
+ * written permission.\r
+ *\r
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS\r
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\r
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE\r
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY\r
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\r
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE\r
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS\r
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\r
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING\r
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\r
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\r
+ *\r
+ * This file is part of the uIP TCP/IP stack.\r
+ *\r
+ * $Id: uip.c,v 1.15 2008/10/15 08:08:32 adamdunkels Exp $\r
+ *\r
+ */\r
+\r
+/*\r
+ * uIP is a small implementation of the IP, UDP and TCP protocols (as\r
+ * well as some basic ICMP stuff). The implementation couples the IP,\r
+ * UDP, TCP and the application layers very tightly. To keep the size\r
+ * of the compiled code down, this code frequently uses the goto\r
+ * statement. While it would be possible to break the uip_process()\r
+ * function into many smaller functions, this would increase the code\r
+ * size because of the overhead of parameter passing and the fact that\r
+ * the optimier would not be as efficient.\r
+ *\r
+ * The principle is that we have a small buffer, called the uip_buf,\r
+ * in which the device driver puts an incoming packet. The TCP/IP\r
+ * stack parses the headers in the packet, and calls the\r
+ * application. If the remote host has sent data to the application,\r
+ * this data is present in the uip_buf and the application read the\r
+ * data from there. It is up to the application to put this data into\r
+ * a byte stream if needed. The application will not be fed with data\r
+ * that is out of sequence.\r
+ *\r
+ * If the application whishes to send data to the peer, it should put\r
+ * its data into the uip_buf. The uip_appdata pointer points to the\r
+ * first available byte. The TCP/IP stack will calculate the\r
+ * checksums, and fill in the necessary header fields and finally send\r
+ * the packet back to the peer.\r
+*/\r
+\r
+#include "uip.h"\r
+#include "uipopt.h"\r
+#include "uip_arp.h"\r
+\r
+#if !UIP_CONF_IPV6 /* If UIP_CONF_IPV6 is defined, we compile the\r
+ uip6.c file instead of this one. Therefore\r
+ this #ifndef removes the entire compilation\r
+ output of the uip.c file */\r
+\r
+\r
+#if UIP_CONF_IPV6\r
+#include "net/uip-neighbor.h"\r
+#endif /* UIP_CONF_IPV6 */\r
+\r
+#include <string.h>\r
+\r
+/*---------------------------------------------------------------------------*/\r
+/* Variable definitions. */\r
+\r
+\r
+/* The IP address of this host. If it is defined to be fixed (by\r
+ setting UIP_FIXEDADDR to 1 in uipopt.h), the address is set\r
+ here. Otherwise, the address */\r
+#if UIP_FIXEDADDR > 0\r
+const uip_ipaddr_t uip_hostaddr =\r
+ { UIP_IPADDR0, UIP_IPADDR1, UIP_IPADDR2, UIP_IPADDR3 };\r
+const uip_ipaddr_t uip_draddr =\r
+ { UIP_DRIPADDR0, UIP_DRIPADDR1, UIP_DRIPADDR2, UIP_DRIPADDR3 };\r
+const uip_ipaddr_t uip_netmask =\r
+ { UIP_NETMASK0, UIP_NETMASK1, UIP_NETMASK2, UIP_NETMASK3 };\r
+#else\r
+uip_ipaddr_t uip_hostaddr, uip_draddr, uip_netmask;\r
+#endif /* UIP_FIXEDADDR */\r
+\r
+const uip_ipaddr_t uip_broadcast_addr =\r
+#if UIP_CONF_IPV6\r
+ { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,\r
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } };\r
+#else /* UIP_CONF_IPV6 */\r
+ { { 0xff, 0xff, 0xff, 0xff } };\r
+#endif /* UIP_CONF_IPV6 */\r
+const uip_ipaddr_t uip_all_zeroes_addr = { { 0x0, /* rest is 0 */ } };\r
+\r
+#if UIP_FIXEDETHADDR\r
+const struct uip_eth_addr uip_ethaddr = {{UIP_ETHADDR0,\r
+ UIP_ETHADDR1,\r
+ UIP_ETHADDR2,\r
+ UIP_ETHADDR3,\r
+ UIP_ETHADDR4,\r
+ UIP_ETHADDR5}};\r
+#else\r
+struct uip_eth_addr uip_ethaddr = {{0,0,0,0,0,0}};\r
+#endif\r
+\r
+#ifndef UIP_CONF_EXTERNAL_BUFFER\r
+u8_t uip_buf[UIP_BUFSIZE + 2]; /* The packet buffer that contains\r
+ incoming packets. */\r
+#endif /* UIP_CONF_EXTERNAL_BUFFER */\r
+\r
+void *uip_appdata; /* The uip_appdata pointer points to\r
+ application data. */\r
+void *uip_sappdata; /* The uip_appdata pointer points to\r
+ the application data which is to\r
+ be sent. */\r
+#if UIP_URGDATA > 0\r
+void *uip_urgdata; /* The uip_urgdata pointer points to\r
+ urgent data (out-of-band data), if\r
+ present. */\r
+u16_t uip_urglen, uip_surglen;\r
+#endif /* UIP_URGDATA > 0 */\r
+\r
+u16_t uip_len, uip_slen;\r
+ /* The uip_len is either 8 or 16 bits,\r
+ depending on the maximum packet\r
+ size. */\r
+\r
+u8_t uip_flags; /* The uip_flags variable is used for\r
+ communication between the TCP/IP stack\r
+ and the application program. */\r
+struct uip_conn *uip_conn; /* uip_conn always points to the current\r
+ connection. */\r
+\r
+struct uip_conn uip_conns[UIP_CONNS];\r
+ /* The uip_conns array holds all TCP\r
+ connections. */\r
+u16_t uip_listenports[UIP_LISTENPORTS];\r
+ /* The uip_listenports list all currently\r
+ listning ports. */\r
+#if UIP_UDP\r
+struct uip_udp_conn *uip_udp_conn;\r
+struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];\r
+#endif /* UIP_UDP */\r
+\r
+static u16_t ipid; /* Ths ipid variable is an increasing\r
+ number that is used for the IP ID\r
+ field. */\r
+\r
+void uip_setipid(u16_t id) { ipid = id; }\r
+\r
+static u8_t iss[4]; /* The iss variable is used for the TCP\r
+ initial sequence number. */\r
+\r
+#if UIP_ACTIVE_OPEN\r
+static u16_t lastport; /* Keeps track of the last port used for\r
+ a new connection. */\r
+#endif /* UIP_ACTIVE_OPEN */\r
+\r
+/* Temporary variables. */\r
+u8_t uip_acc32[4];\r
+static u8_t c, opt;\r
+static u16_t tmp16;\r
+\r
+/* Structures and definitions. */\r
+#define TCP_FIN 0x01\r
+#define TCP_SYN 0x02\r
+#define TCP_RST 0x04\r
+#define TCP_PSH 0x08\r
+#define TCP_ACK 0x10\r
+#define TCP_URG 0x20\r
+#define TCP_CTL 0x3f\r
+\r
+#define TCP_OPT_END 0 /* End of TCP options list */\r
+#define TCP_OPT_NOOP 1 /* "No-operation" TCP option */\r
+#define TCP_OPT_MSS 2 /* Maximum segment size TCP option */\r
+\r
+#define TCP_OPT_MSS_LEN 4 /* Length of TCP MSS option. */\r
+\r
+#define ICMP_ECHO_REPLY 0\r
+#define ICMP_ECHO 8\r
+\r
+#define ICMP_DEST_UNREACHABLE 3\r
+#define ICMP_PORT_UNREACHABLE 3\r
+\r
+#define ICMP6_ECHO_REPLY 129\r
+#define ICMP6_ECHO 128\r
+#define ICMP6_NEIGHBOR_SOLICITATION 135\r
+#define ICMP6_NEIGHBOR_ADVERTISEMENT 136\r
+\r
+#define ICMP6_FLAG_S (1 << 6)\r
+\r
+#define ICMP6_OPTION_SOURCE_LINK_ADDRESS 1\r
+#define ICMP6_OPTION_TARGET_LINK_ADDRESS 2\r
+\r
+\r
+/* Macros. */\r
+#define BUF ((struct uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN])\r
+#define FBUF ((struct uip_tcpip_hdr *)&uip_reassbuf[0])\r
+#define ICMPBUF ((struct uip_icmpip_hdr *)&uip_buf[UIP_LLH_LEN])\r
+#define UDPBUF ((struct uip_udpip_hdr *)&uip_buf[UIP_LLH_LEN])\r
+\r
+\r
+#if UIP_STATISTICS == 1\r
+struct uip_stats uip_stat;\r
+#define UIP_STAT(s) s\r
+#else\r
+#define UIP_STAT(s)\r
+#endif /* UIP_STATISTICS == 1 */\r
+\r
+#if UIP_LOGGING == 1\r
+#include <stdio.h>\r
+void uip_log(char *msg);\r
+#define UIP_LOG(m) uip_log(m)\r
+#else\r
+#define UIP_LOG(m)\r
+#endif /* UIP_LOGGING == 1 */\r
+\r
+#if ! UIP_ARCH_ADD32\r
+void\r
+uip_add32(u8_t *op32, u16_t op16)\r
+{\r
+ uip_acc32[3] = op32[3] + (op16 & 0xff);\r
+ uip_acc32[2] = op32[2] + (op16 >> 8);\r
+ uip_acc32[1] = op32[1];\r
+ uip_acc32[0] = op32[0];\r
+ \r
+ if(uip_acc32[2] < (op16 >> 8)) {\r
+ ++uip_acc32[1];\r
+ if(uip_acc32[1] == 0) {\r
+ ++uip_acc32[0];\r
+ }\r
+ }\r
+ \r
+ \r
+ if(uip_acc32[3] < (op16 & 0xff)) {\r
+ ++uip_acc32[2];\r
+ if(uip_acc32[2] == 0) {\r
+ ++uip_acc32[1];\r
+ if(uip_acc32[1] == 0) {\r
+ ++uip_acc32[0];\r
+ }\r
+ }\r
+ }\r
+}\r
+\r
+#endif /* UIP_ARCH_ADD32 */\r
+\r
+#if ! UIP_ARCH_CHKSUM\r
+/*---------------------------------------------------------------------------*/\r
+static u16_t\r
+chksum(u16_t sum, const u8_t *data, u16_t len)\r
+{\r
+ u16_t t;\r
+ const u8_t *dataptr;\r
+ const u8_t *last_byte;\r
+\r
+ dataptr = data;\r
+ last_byte = data + len - 1;\r
+ \r
+ while(dataptr < last_byte) { /* At least two more bytes */\r
+ t = (dataptr[0] << 8) + dataptr[1];\r
+ sum += t;\r
+ if(sum < t) {\r
+ sum++; /* carry */\r
+ }\r
+ dataptr += 2;\r
+ }\r
+ \r
+ if(dataptr == last_byte) {\r
+ t = (dataptr[0] << 8) + 0;\r
+ sum += t;\r
+ if(sum < t) {\r
+ sum++; /* carry */\r
+ }\r
+ }\r
+\r
+ /* Return sum in host byte order. */\r
+ return sum;\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+u16_t\r
+uip_chksum(u16_t *data, u16_t len)\r
+{\r
+ return htons(chksum(0, (u8_t *)data, len));\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+#ifndef UIP_ARCH_IPCHKSUM\r
+u16_t\r
+uip_ipchksum(void)\r
+{\r
+ u16_t sum;\r
+\r
+ sum = chksum(0, &uip_buf[UIP_LLH_LEN], UIP_IPH_LEN);\r
+ DEBUG_PRINTF("uip_ipchksum: sum 0x%04x\n", sum);\r
+ return (sum == 0) ? 0xffff : htons(sum);\r
+}\r
+#endif\r
+/*---------------------------------------------------------------------------*/\r
+static u16_t\r
+upper_layer_chksum(u8_t proto)\r
+{\r
+ u16_t upper_layer_len;\r
+ u16_t sum;\r
+ \r
+#if UIP_CONF_IPV6\r
+ upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]);\r
+#else /* UIP_CONF_IPV6 */\r
+ upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;\r
+#endif /* UIP_CONF_IPV6 */\r
+ \r
+ /* First sum pseudoheader. */\r
+ \r
+ /* IP protocol and length fields. This addition cannot carry. */\r
+ sum = upper_layer_len + proto;\r
+ /* Sum IP source and destination addresses. */\r
+ sum = chksum(sum, (u8_t *)&BUF->srcipaddr, 2 * sizeof(uip_ipaddr_t));\r
+\r
+ /* Sum TCP header and data. */\r
+ sum = chksum(sum, &uip_buf[UIP_IPH_LEN + UIP_LLH_LEN],\r
+ upper_layer_len);\r
+ \r
+ return (sum == 0) ? 0xffff : htons(sum);\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+#if UIP_CONF_IPV6\r
+u16_t\r
+uip_icmp6chksum(void)\r
+{\r
+ return upper_layer_chksum(UIP_PROTO_ICMP6);\r
+ \r
+}\r
+#endif /* UIP_CONF_IPV6 */\r
+/*---------------------------------------------------------------------------*/\r
+u16_t\r
+uip_tcpchksum(void)\r
+{\r
+ return upper_layer_chksum(UIP_PROTO_TCP);\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+#if UIP_UDP_CHECKSUMS\r
+u16_t\r
+uip_udpchksum(void)\r
+{\r
+ return upper_layer_chksum(UIP_PROTO_UDP);\r
+}\r
+#endif /* UIP_UDP_CHECKSUMS */\r
+#endif /* UIP_ARCH_CHKSUM */\r
+/*---------------------------------------------------------------------------*/\r
+void\r
+uip_init(void)\r
+{\r
+ for(c = 0; c < UIP_LISTENPORTS; ++c) {\r
+ uip_listenports[c] = 0;\r
+ }\r
+ for(c = 0; c < UIP_CONNS; ++c) {\r
+ uip_conns[c].tcpstateflags = UIP_CLOSED;\r
+ }\r
+#if UIP_ACTIVE_OPEN\r
+ lastport = 1024;\r
+#endif /* UIP_ACTIVE_OPEN */\r
+\r
+#if UIP_UDP\r
+ for(c = 0; c < UIP_UDP_CONNS; ++c) {\r
+ uip_udp_conns[c].lport = 0;\r
+ }\r
+#endif /* UIP_UDP */\r
+ \r
+\r
+ /* IPv4 initialization. */\r
+#if UIP_FIXEDADDR == 0\r
+ /* uip_hostaddr[0] = uip_hostaddr[1] = 0;*/\r
+#endif /* UIP_FIXEDADDR */\r
+\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+#if UIP_ACTIVE_OPEN\r
+struct uip_conn *\r
+uip_connect(uip_ipaddr_t *ripaddr, u16_t rport)\r
+{\r
+ register struct uip_conn *conn, *cconn;\r
+ \r
+ /* Find an unused local port. */\r
+ again:\r
+ ++lastport;\r
+\r
+ if(lastport >= 32000) {\r
+ lastport = 4096;\r
+ }\r
+\r
+ /* Check if this port is already in use, and if so try to find\r
+ another one. */\r
+ for(c = 0; c < UIP_CONNS; ++c) {\r
+ conn = &uip_conns[c];\r
+ if(conn->tcpstateflags != UIP_CLOSED &&\r
+ conn->lport == htons(lastport)) {\r
+ goto again;\r
+ }\r
+ }\r
+\r
+ conn = 0;\r
+ for(c = 0; c < UIP_CONNS; ++c) {\r
+ cconn = &uip_conns[c];\r
+ if(cconn->tcpstateflags == UIP_CLOSED) {\r
+ conn = cconn;\r
+ break;\r
+ }\r
+ if(cconn->tcpstateflags == UIP_TIME_WAIT) {\r
+ if(conn == 0 ||\r
+ cconn->timer > conn->timer) {\r
+ conn = cconn;\r
+ }\r
+ }\r
+ }\r
+\r
+ if(conn == 0) {\r
+ return 0;\r
+ }\r
+ \r
+ conn->tcpstateflags = UIP_SYN_SENT;\r
+\r
+ conn->snd_nxt[0] = iss[0];\r
+ conn->snd_nxt[1] = iss[1];\r
+ conn->snd_nxt[2] = iss[2];\r
+ conn->snd_nxt[3] = iss[3];\r
+\r
+ conn->initialmss = conn->mss = UIP_TCP_MSS;\r
+ \r
+ conn->len = 1; /* TCP length of the SYN is one. */\r
+ conn->nrtx = 0;\r
+ conn->timer = 1; /* Send the SYN next time around. */\r
+ conn->rto = UIP_RTO;\r
+ conn->sa = 0;\r
+ conn->sv = 16; /* Initial value of the RTT variance. */\r
+ conn->lport = htons(lastport);\r
+ conn->rport = rport;\r
+ uip_ipaddr_copy(&conn->ripaddr, ripaddr);\r
+ \r
+ return conn;\r
+}\r
+#endif /* UIP_ACTIVE_OPEN */\r
+/*---------------------------------------------------------------------------*/\r
+#if UIP_UDP\r
+struct uip_udp_conn *\r
+uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport)\r
+{\r
+ register struct uip_udp_conn *conn;\r
+ \r
+ /* Find an unused local port. */\r
+ again:\r
+ ++lastport;\r
+\r
+ if(lastport >= 32000) {\r
+ lastport = 4096;\r
+ }\r
+ \r
+ for(c = 0; c < UIP_UDP_CONNS; ++c) {\r
+ if(uip_udp_conns[c].lport == htons(lastport)) {\r
+ goto again;\r
+ }\r
+ }\r
+\r
+\r
+ conn = 0;\r
+ for(c = 0; c < UIP_UDP_CONNS; ++c) {\r
+ if(uip_udp_conns[c].lport == 0) {\r
+ conn = &uip_udp_conns[c];\r
+ break;\r
+ }\r
+ }\r
+\r
+ if(conn == 0) {\r
+ return 0;\r
+ }\r
+ \r
+ conn->lport = HTONS(lastport);\r
+ conn->rport = rport;\r
+ if(ripaddr == NULL) {\r
+ memset(&conn->ripaddr, 0, sizeof(uip_ipaddr_t));\r
+ } else {\r
+ uip_ipaddr_copy(&conn->ripaddr, ripaddr);\r
+ }\r
+ conn->ttl = UIP_TTL;\r
+ \r
+ return conn;\r
+}\r
+#endif /* UIP_UDP */\r
+/*---------------------------------------------------------------------------*/\r
+void\r
+uip_unlisten(u16_t port)\r
+{\r
+ for(c = 0; c < UIP_LISTENPORTS; ++c) {\r
+ if(uip_listenports[c] == port) {\r
+ uip_listenports[c] = 0;\r
+ return;\r
+ }\r
+ }\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+void\r
+uip_listen(u16_t port)\r
+{\r
+ for(c = 0; c < UIP_LISTENPORTS; ++c) {\r
+ if(uip_listenports[c] == 0) {\r
+ uip_listenports[c] = port;\r
+ return;\r
+ }\r
+ }\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+/* XXX: IP fragment reassembly: not well-tested. */\r
+\r
+#if UIP_REASSEMBLY && !UIP_CONF_IPV6\r
+#define UIP_REASS_BUFSIZE (UIP_BUFSIZE - UIP_LLH_LEN)\r
+static u8_t uip_reassbuf[UIP_REASS_BUFSIZE];\r
+static u8_t uip_reassbitmap[UIP_REASS_BUFSIZE / (8 * 8)];\r
+static const u8_t bitmap_bits[8] = {0xff, 0x7f, 0x3f, 0x1f,\r
+ 0x0f, 0x07, 0x03, 0x01};\r
+static u16_t uip_reasslen;\r
+static u8_t uip_reassflags;\r
+#define UIP_REASS_FLAG_LASTFRAG 0x01\r
+static u8_t uip_reasstmr;\r
+\r
+#define IP_MF 0x20\r
+\r
+static u8_t\r
+uip_reass(void)\r
+{\r
+ u16_t offset, len;\r
+ u16_t i;\r
+\r
+ /* If ip_reasstmr is zero, no packet is present in the buffer, so we\r
+ write the IP header of the fragment into the reassembly\r
+ buffer. The timer is updated with the maximum age. */\r
+ if(uip_reasstmr == 0) {\r
+ memcpy(uip_reassbuf, &BUF->vhl, UIP_IPH_LEN);\r
+ uip_reasstmr = UIP_REASS_MAXAGE;\r
+ uip_reassflags = 0;\r
+ /* Clear the bitmap. */\r
+ memset(uip_reassbitmap, 0, sizeof(uip_reassbitmap));\r
+ }\r
+\r
+ /* Check if the incoming fragment matches the one currently present\r
+ in the reasembly buffer. If so, we proceed with copying the\r
+ fragment into the buffer. */\r
+ if(BUF->srcipaddr[0] == FBUF->srcipaddr[0] &&\r
+ BUF->srcipaddr[1] == FBUF->srcipaddr[1] &&\r
+ BUF->destipaddr[0] == FBUF->destipaddr[0] &&\r
+ BUF->destipaddr[1] == FBUF->destipaddr[1] &&\r
+ BUF->ipid[0] == FBUF->ipid[0] &&\r
+ BUF->ipid[1] == FBUF->ipid[1]) {\r
+\r
+ len = (BUF->len[0] << 8) + BUF->len[1] - (BUF->vhl & 0x0f) * 4;\r
+ offset = (((BUF->ipoffset[0] & 0x3f) << 8) + BUF->ipoffset[1]) * 8;\r
+\r
+ /* If the offset or the offset + fragment length overflows the\r
+ reassembly buffer, we discard the entire packet. */\r
+ if(offset > UIP_REASS_BUFSIZE ||\r
+ offset + len > UIP_REASS_BUFSIZE) {\r
+ uip_reasstmr = 0;\r
+ goto nullreturn;\r
+ }\r
+\r
+ /* Copy the fragment into the reassembly buffer, at the right\r
+ offset. */\r
+ memcpy(&uip_reassbuf[UIP_IPH_LEN + offset],\r
+ (char *)BUF + (int)((BUF->vhl & 0x0f) * 4),\r
+ len);\r
+ \r
+ /* Update the bitmap. */\r
+ if(offset / (8 * 8) == (offset + len) / (8 * 8)) {\r
+ /* If the two endpoints are in the same byte, we only update\r
+ that byte. */\r
+ \r
+ uip_reassbitmap[offset / (8 * 8)] |=\r
+ bitmap_bits[(offset / 8 ) & 7] &\r
+ ~bitmap_bits[((offset + len) / 8 ) & 7];\r
+ } else {\r
+ /* If the two endpoints are in different bytes, we update the\r
+ bytes in the endpoints and fill the stuff inbetween with\r
+ 0xff. */\r
+ uip_reassbitmap[offset / (8 * 8)] |=\r
+ bitmap_bits[(offset / 8 ) & 7];\r
+ for(i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i) {\r
+ uip_reassbitmap[i] = 0xff;\r
+ }\r
+ uip_reassbitmap[(offset + len) / (8 * 8)] |=\r
+ ~bitmap_bits[((offset + len) / 8 ) & 7];\r
+ }\r
+ \r
+ /* If this fragment has the More Fragments flag set to zero, we\r
+ know that this is the last fragment, so we can calculate the\r
+ size of the entire packet. We also set the\r
+ IP_REASS_FLAG_LASTFRAG flag to indicate that we have received\r
+ the final fragment. */\r
+\r
+ if((BUF->ipoffset[0] & IP_MF) == 0) {\r
+ uip_reassflags |= UIP_REASS_FLAG_LASTFRAG;\r
+ uip_reasslen = offset + len;\r
+ }\r
+ \r
+ /* Finally, we check if we have a full packet in the buffer. We do\r
+ this by checking if we have the last fragment and if all bits\r
+ in the bitmap are set. */\r
+ if(uip_reassflags & UIP_REASS_FLAG_LASTFRAG) {\r
+ /* Check all bytes up to and including all but the last byte in\r
+ the bitmap. */\r
+ for(i = 0; i < uip_reasslen / (8 * 8) - 1; ++i) {\r
+ if(uip_reassbitmap[i] != 0xff) {\r
+ goto nullreturn;\r
+ }\r
+ }\r
+ /* Check the last byte in the bitmap. It should contain just the\r
+ right amount of bits. */\r
+ if(uip_reassbitmap[uip_reasslen / (8 * 8)] !=\r
+ (u8_t)~bitmap_bits[uip_reasslen / 8 & 7]) {\r
+ goto nullreturn;\r
+ }\r
+\r
+ /* If we have come this far, we have a full packet in the\r
+ buffer, so we allocate a pbuf and copy the packet into it. We\r
+ also reset the timer. */\r
+ uip_reasstmr = 0;\r
+ memcpy(BUF, FBUF, uip_reasslen);\r
+\r
+ /* Pretend to be a "normal" (i.e., not fragmented) IP packet\r
+ from now on. */\r
+ BUF->ipoffset[0] = BUF->ipoffset[1] = 0;\r
+ BUF->len[0] = uip_reasslen >> 8;\r
+ BUF->len[1] = uip_reasslen & 0xff;\r
+ BUF->ipchksum = 0;\r
+ BUF->ipchksum = ~(uip_ipchksum());\r
+\r
+ return uip_reasslen;\r
+ }\r
+ }\r
+\r
+ nullreturn:\r
+ return 0;\r
+}\r
+#endif /* UIP_REASSEMBLY */\r
+/*---------------------------------------------------------------------------*/\r
+static void\r
+uip_add_rcv_nxt(u16_t n)\r
+{\r
+ uip_add32(uip_conn->rcv_nxt, n);\r
+ uip_conn->rcv_nxt[0] = uip_acc32[0];\r
+ uip_conn->rcv_nxt[1] = uip_acc32[1];\r
+ uip_conn->rcv_nxt[2] = uip_acc32[2];\r
+ uip_conn->rcv_nxt[3] = uip_acc32[3];\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+void\r
+uip_process(u8_t flag)\r
+{\r
+ register struct uip_conn *uip_connr = uip_conn;\r
+\r
+#if UIP_UDP\r
+ if(flag == UIP_UDP_SEND_CONN) {\r
+ goto udp_send;\r
+ }\r
+#endif /* UIP_UDP */\r
+ \r
+ uip_sappdata = uip_appdata = &uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN];\r
+\r
+ /* Check if we were invoked because of a poll request for a\r
+ particular connection. */\r
+ if(flag == UIP_POLL_REQUEST) {\r
+ if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED &&\r
+ !uip_outstanding(uip_connr)) {\r
+ uip_len = uip_slen = 0;\r
+ uip_flags = UIP_POLL;\r
+ UIP_APPCALL();\r
+ goto appsend;\r
+ }\r
+ goto drop;\r
+ \r
+ /* Check if we were invoked because of the perodic timer fireing. */\r
+ } else if(flag == UIP_TIMER) {\r
+#if UIP_REASSEMBLY\r
+ if(uip_reasstmr != 0) {\r
+ --uip_reasstmr;\r
+ }\r
+#endif /* UIP_REASSEMBLY */\r
+ /* Increase the initial sequence number. */\r
+ if(++iss[3] == 0) {\r
+ if(++iss[2] == 0) {\r
+ if(++iss[1] == 0) {\r
+ ++iss[0];\r
+ }\r
+ }\r
+ }\r
+\r
+ /* Reset the length variables. */\r
+ uip_len = 0;\r
+ uip_slen = 0;\r
+\r
+ /* Check if the connection is in a state in which we simply wait\r
+ for the connection to time out. If so, we increase the\r
+ connection's timer and remove the connection if it times\r
+ out. */\r
+ if(uip_connr->tcpstateflags == UIP_TIME_WAIT ||\r
+ uip_connr->tcpstateflags == UIP_FIN_WAIT_2) {\r
+ ++(uip_connr->timer);\r
+ if(uip_connr->timer == UIP_TIME_WAIT_TIMEOUT) {\r
+ uip_connr->tcpstateflags = UIP_CLOSED;\r
+ }\r
+ } else if(uip_connr->tcpstateflags != UIP_CLOSED) {\r
+ /* If the connection has outstanding data, we increase the\r
+ connection's timer and see if it has reached the RTO value\r
+ in which case we retransmit. */\r
+ if(uip_outstanding(uip_connr)) {\r
+ if(uip_connr->timer-- == 0) {\r
+ if(uip_connr->nrtx == UIP_MAXRTX ||\r
+ ((uip_connr->tcpstateflags == UIP_SYN_SENT ||\r
+ uip_connr->tcpstateflags == UIP_SYN_RCVD) &&\r
+ uip_connr->nrtx == UIP_MAXSYNRTX)) {\r
+ uip_connr->tcpstateflags = UIP_CLOSED;\r
+\r
+ /* We call UIP_APPCALL() with uip_flags set to\r
+ UIP_TIMEDOUT to inform the application that the\r
+ connection has timed out. */\r
+ uip_flags = UIP_TIMEDOUT;\r
+ UIP_APPCALL();\r
+\r
+ /* We also send a reset packet to the remote host. */\r
+ BUF->flags = TCP_RST | TCP_ACK;\r
+ goto tcp_send_nodata;\r
+ }\r
+\r
+ /* Exponential backoff. */\r
+ uip_connr->timer = UIP_RTO << (uip_connr->nrtx > 4?\r
+ 4:\r
+ uip_connr->nrtx);\r
+ ++(uip_connr->nrtx);\r
+ \r
+ /* Ok, so we need to retransmit. We do this differently\r
+ depending on which state we are in. In ESTABLISHED, we\r
+ call upon the application so that it may prepare the\r
+ data for the retransmit. In SYN_RCVD, we resend the\r
+ SYNACK that we sent earlier and in LAST_ACK we have to\r
+ retransmit our FINACK. */\r
+ UIP_STAT(++uip_stat.tcp.rexmit);\r
+ switch(uip_connr->tcpstateflags & UIP_TS_MASK) {\r
+ case UIP_SYN_RCVD:\r
+ /* In the SYN_RCVD state, we should retransmit our\r
+ SYNACK. */\r
+ goto tcp_send_synack;\r
+ \r
+#if UIP_ACTIVE_OPEN\r
+ case UIP_SYN_SENT:\r
+ /* In the SYN_SENT state, we retransmit out SYN. */\r
+ BUF->flags = 0;\r
+ goto tcp_send_syn;\r
+#endif /* UIP_ACTIVE_OPEN */\r
+ \r
+ case UIP_ESTABLISHED:\r
+ /* In the ESTABLISHED state, we call upon the application\r
+ to do the actual retransmit after which we jump into\r
+ the code for sending out the packet (the apprexmit\r
+ label). */\r
+ uip_flags = UIP_REXMIT;\r
+ UIP_APPCALL();\r
+ goto apprexmit;\r
+ \r
+ case UIP_FIN_WAIT_1:\r
+ case UIP_CLOSING:\r
+ case UIP_LAST_ACK:\r
+ /* In all these states we should retransmit a FINACK. */\r
+ goto tcp_send_finack;\r
+ \r
+ }\r
+ }\r
+ } else if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED) {\r
+ /* If there was no need for a retransmission, we poll the\r
+ application for new data. */\r
+ uip_len = uip_slen = 0; \r
+ uip_flags = UIP_POLL;\r
+ UIP_APPCALL();\r
+ goto appsend;\r
+ }\r
+ }\r
+ goto drop;\r
+ }\r
+#if UIP_UDP\r
+ if(flag == UIP_UDP_TIMER) {\r
+ if(uip_udp_conn->lport != 0) {\r
+ uip_conn = NULL;\r
+ uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];\r
+ uip_len = uip_slen = 0;\r
+ uip_flags = UIP_POLL;\r
+ UIP_UDP_APPCALL();\r
+ goto udp_send;\r
+ } else {\r
+ goto drop;\r
+ }\r
+ }\r
+#endif\r
+\r
+ /* This is where the input processing starts. */\r
+ UIP_STAT(++uip_stat.ip.recv);\r
+\r
+ /* Start of IP input header processing code. */\r
+ \r
+#if UIP_CONF_IPV6\r
+ /* Check validity of the IP header. */\r
+ if((BUF->vtc & 0xf0) != 0x60) { /* IP version and header length. */\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ UIP_STAT(++uip_stat.ip.vhlerr);\r
+ UIP_LOG("ipv6: invalid version.");\r
+ goto drop;\r
+ }\r
+#else /* UIP_CONF_IPV6 */\r
+ /* Check validity of the IP header. */\r
+ if(BUF->vhl != 0x45) { /* IP version and header length. */\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ UIP_STAT(++uip_stat.ip.vhlerr);\r
+ UIP_LOG("ip: invalid version or header length.");\r
+ goto drop;\r
+ }\r
+#endif /* UIP_CONF_IPV6 */\r
+ \r
+ /* Check the size of the packet. If the size reported to us in\r
+ uip_len is smaller the size reported in the IP header, we assume\r
+ that the packet has been corrupted in transit. If the size of\r
+ uip_len is larger than the size reported in the IP packet header,\r
+ the packet has been padded and we set uip_len to the correct\r
+ value.. */\r
+\r
+ if((BUF->len[0] << 8) + BUF->len[1] <= uip_len) {\r
+ uip_len = (BUF->len[0] << 8) + BUF->len[1];\r
+#if UIP_CONF_IPV6\r
+ uip_len += 40; /* The length reported in the IPv6 header is the\r
+ length of the payload that follows the\r
+ header. However, uIP uses the uip_len variable\r
+ for holding the size of the entire packet,\r
+ including the IP header. For IPv4 this is not a\r
+ problem as the length field in the IPv4 header\r
+ contains the length of the entire packet. But\r
+ for IPv6 we need to add the size of the IPv6\r
+ header (40 bytes). */\r
+#endif /* UIP_CONF_IPV6 */\r
+ } else {\r
+ UIP_LOG("ip: packet shorter than reported in IP header.");\r
+ goto drop;\r
+ }\r
+\r
+#if !UIP_CONF_IPV6\r
+ /* Check the fragment flag. */\r
+ if((BUF->ipoffset[0] & 0x3f) != 0 ||\r
+ BUF->ipoffset[1] != 0) {\r
+#if UIP_REASSEMBLY\r
+ uip_len = uip_reass();\r
+ if(uip_len == 0) {\r
+ goto drop;\r
+ }\r
+#else /* UIP_REASSEMBLY */\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ UIP_STAT(++uip_stat.ip.fragerr);\r
+ UIP_LOG("ip: fragment dropped.");\r
+ goto drop;\r
+#endif /* UIP_REASSEMBLY */\r
+ }\r
+#endif /* UIP_CONF_IPV6 */\r
+\r
+ if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) {\r
+ /* If we are configured to use ping IP address configuration and\r
+ hasn't been assigned an IP address yet, we accept all ICMP\r
+ packets. */\r
+#if UIP_PINGADDRCONF && !UIP_CONF_IPV6\r
+ if(BUF->proto == UIP_PROTO_ICMP) {\r
+ UIP_LOG("ip: possible ping config packet received.");\r
+ goto icmp_input;\r
+ } else {\r
+ UIP_LOG("ip: packet dropped since no address assigned.");\r
+ goto drop;\r
+ }\r
+#endif /* UIP_PINGADDRCONF */\r
+\r
+ } else {\r
+ /* If IP broadcast support is configured, we check for a broadcast\r
+ UDP packet, which may be destined to us. */\r
+#if UIP_BROADCAST\r
+ DEBUG_PRINTF("UDP IP checksum 0x%04x\n", uip_ipchksum());\r
+ if(BUF->proto == UIP_PROTO_UDP &&\r
+ uip_ipaddr_cmp(&BUF->destipaddr, &uip_broadcast_addr)\r
+ /*&&\r
+ uip_ipchksum() == 0xffff*/) {\r
+ goto udp_input;\r
+ }\r
+#endif /* UIP_BROADCAST */\r
+ \r
+ /* Check if the packet is destined for our IP address. */\r
+#if !UIP_CONF_IPV6\r
+ if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr)) {\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ goto drop;\r
+ }\r
+#else /* UIP_CONF_IPV6 */\r
+ /* For IPv6, packet reception is a little trickier as we need to\r
+ make sure that we listen to certain multicast addresses (all\r
+ hosts multicast address, and the solicited-node multicast\r
+ address) as well. However, we will cheat here and accept all\r
+ multicast packets that are sent to the ff02::/16 addresses. */\r
+ if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr) &&\r
+ BUF->destipaddr.u16[0] != HTONS(0xff02)) {\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ goto drop;\r
+ }\r
+#endif /* UIP_CONF_IPV6 */\r
+ }\r
+\r
+#if !UIP_CONF_IPV6\r
+ if(uip_ipchksum() != 0xffff) { /* Compute and check the IP header\r
+ checksum. */\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ UIP_STAT(++uip_stat.ip.chkerr);\r
+ UIP_LOG("ip: bad checksum.");\r
+ goto drop;\r
+ }\r
+#endif /* UIP_CONF_IPV6 */\r
+\r
+ if(BUF->proto == UIP_PROTO_TCP) { /* Check for TCP packet. If so,\r
+ proceed with TCP input\r
+ processing. */\r
+ goto tcp_input;\r
+ }\r
+\r
+#if UIP_UDP\r
+ if(BUF->proto == UIP_PROTO_UDP) {\r
+ goto udp_input;\r
+ }\r
+#endif /* UIP_UDP */\r
+\r
+#if !UIP_CONF_IPV6\r
+ /* ICMPv4 processing code follows. */\r
+ if(BUF->proto != UIP_PROTO_ICMP) { /* We only allow ICMP packets from\r
+ here. */\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ UIP_STAT(++uip_stat.ip.protoerr);\r
+ UIP_LOG("ip: neither tcp nor icmp.");\r
+ goto drop;\r
+ }\r
+\r
+#if UIP_PINGADDRCONF\r
+ icmp_input:\r
+#endif /* UIP_PINGADDRCONF */\r
+ UIP_STAT(++uip_stat.icmp.recv);\r
+\r
+ /* ICMP echo (i.e., ping) processing. This is simple, we only change\r
+ the ICMP type from ECHO to ECHO_REPLY and adjust the ICMP\r
+ checksum before we return the packet. */\r
+ if(ICMPBUF->type != ICMP_ECHO) {\r
+ UIP_STAT(++uip_stat.icmp.drop);\r
+ UIP_STAT(++uip_stat.icmp.typeerr);\r
+ UIP_LOG("icmp: not icmp echo.");\r
+ goto drop;\r
+ }\r
+\r
+ /* If we are configured to use ping IP address assignment, we use\r
+ the destination IP address of this ping packet and assign it to\r
+ ourself. */\r
+#if UIP_PINGADDRCONF\r
+ if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) {\r
+ uip_hostaddr = BUF->destipaddr;\r
+ }\r
+#endif /* UIP_PINGADDRCONF */\r
+\r
+ ICMPBUF->type = ICMP_ECHO_REPLY;\r
+\r
+ if(ICMPBUF->icmpchksum >= HTONS(0xffff - (ICMP_ECHO << 8))) {\r
+ ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8) + 1;\r
+ } else {\r
+ ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8);\r
+ }\r
+\r
+ /* Swap IP addresses. */\r
+ uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);\r
+ uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);\r
+\r
+ UIP_STAT(++uip_stat.icmp.sent);\r
+ BUF->ttl = UIP_TTL;\r
+ goto ip_send_nolen;\r
+\r
+ /* End of IPv4 input header processing code. */\r
+#else /* !UIP_CONF_IPV6 */\r
+\r
+ /* This is IPv6 ICMPv6 processing code. */\r
+ DEBUG_PRINTF("icmp6_input: length %d\n", uip_len);\r
+\r
+ if(BUF->proto != UIP_PROTO_ICMP6) { /* We only allow ICMPv6 packets from\r
+ here. */\r
+ UIP_STAT(++uip_stat.ip.drop);\r
+ UIP_STAT(++uip_stat.ip.protoerr);\r
+ UIP_LOG("ip: neither tcp nor icmp6.");\r
+ goto drop;\r
+ }\r
+\r
+ UIP_STAT(++uip_stat.icmp.recv);\r
+\r
+ /* If we get a neighbor solicitation for our address we should send\r
+ a neighbor advertisement message back. */\r
+ if(ICMPBUF->type == ICMP6_NEIGHBOR_SOLICITATION) {\r
+ if(uip_ipaddr_cmp(&ICMPBUF->icmp6data, &uip_hostaddr)) {\r
+\r
+ if(ICMPBUF->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS) {\r
+ /* Save the sender's address in our neighbor list. */\r
+ uip_neighbor_add(&ICMPBUF->srcipaddr, &(ICMPBUF->options[2]));\r
+ }\r
+ \r
+ /* We should now send a neighbor advertisement back to where the\r
+ neighbor solicication came from. */\r
+ ICMPBUF->type = ICMP6_NEIGHBOR_ADVERTISEMENT;\r
+ ICMPBUF->flags = ICMP6_FLAG_S; /* Solicited flag. */\r
+ \r
+ ICMPBUF->reserved1 = ICMPBUF->reserved2 = ICMPBUF->reserved3 = 0;\r
+ \r
+ uip_ipaddr_copy(&ICMPBUF->destipaddr, &ICMPBUF->srcipaddr);\r
+ uip_ipaddr_copy(&ICMPBUF->srcipaddr, &uip_hostaddr);\r
+ ICMPBUF->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS;\r
+ ICMPBUF->options[1] = 1; /* Options length, 1 = 8 bytes. */\r
+ memcpy(&(ICMPBUF->options[2]), &uip_ethaddr, sizeof(uip_ethaddr));\r
+ ICMPBUF->icmpchksum = 0;\r
+ ICMPBUF->icmpchksum = ~uip_icmp6chksum();\r
+ \r
+ goto send;\r
+ \r
+ }\r
+ goto drop;\r
+ } else if(ICMPBUF->type == ICMP6_ECHO) {\r
+ /* ICMP echo (i.e., ping) processing. This is simple, we only\r
+ change the ICMP type from ECHO to ECHO_REPLY and update the\r
+ ICMP checksum before we return the packet. */\r
+\r
+ ICMPBUF->type = ICMP6_ECHO_REPLY;\r
+ \r
+ uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);\r
+ uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);\r
+ ICMPBUF->icmpchksum = 0;\r
+ ICMPBUF->icmpchksum = ~uip_icmp6chksum();\r
+ \r
+ UIP_STAT(++uip_stat.icmp.sent);\r
+ goto send;\r
+ } else {\r
+ DEBUG_PRINTF("Unknown icmp6 message type %d\n", ICMPBUF->type);\r
+ UIP_STAT(++uip_stat.icmp.drop);\r
+ UIP_STAT(++uip_stat.icmp.typeerr);\r
+ UIP_LOG("icmp: unknown ICMP message.");\r
+ goto drop;\r
+ }\r
+\r
+ /* End of IPv6 ICMP processing. */\r
+ \r
+#endif /* !UIP_CONF_IPV6 */\r
+\r
+#if UIP_UDP\r
+ /* UDP input processing. */\r
+ udp_input:\r
+ /* UDP processing is really just a hack. We don't do anything to the\r
+ UDP/IP headers, but let the UDP application do all the hard\r
+ work. If the application sets uip_slen, it has a packet to\r
+ send. */\r
+#if UIP_UDP_CHECKSUMS\r
+ uip_len = uip_len - UIP_IPUDPH_LEN;\r
+ uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];\r
+ if(UDPBUF->udpchksum != 0 && uip_udpchksum() != 0xffff) {\r
+ UIP_STAT(++uip_stat.udp.drop);\r
+ UIP_STAT(++uip_stat.udp.chkerr);\r
+ UIP_LOG("udp: bad checksum.");\r
+ goto drop;\r
+ }\r
+#else /* UIP_UDP_CHECKSUMS */\r
+ uip_len = uip_len - UIP_IPUDPH_LEN;\r
+#endif /* UIP_UDP_CHECKSUMS */\r
+\r
+ /* Demultiplex this UDP packet between the UDP "connections". */\r
+ for(uip_udp_conn = &uip_udp_conns[0];\r
+ uip_udp_conn < &uip_udp_conns[UIP_UDP_CONNS];\r
+ ++uip_udp_conn) {\r
+ /* If the local UDP port is non-zero, the connection is considered\r
+ to be used. If so, the local port number is checked against the\r
+ destination port number in the received packet. If the two port\r
+ numbers match, the remote port number is checked if the\r
+ connection is bound to a remote port. Finally, if the\r
+ connection is bound to a remote IP address, the source IP\r
+ address of the packet is checked. */\r
+ if(uip_udp_conn->lport != 0 &&\r
+ UDPBUF->destport == uip_udp_conn->lport &&\r
+ (uip_udp_conn->rport == 0 ||\r
+ UDPBUF->srcport == uip_udp_conn->rport) &&\r
+ (uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_all_zeroes_addr) ||\r
+ uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_broadcast_addr) ||\r
+ uip_ipaddr_cmp(&BUF->srcipaddr, &uip_udp_conn->ripaddr))) {\r
+ goto udp_found;\r
+ }\r
+ }\r
+ UIP_LOG("udp: no matching connection found");\r
+#if UIP_CONF_ICMP_DEST_UNREACH && !UIP_CONF_IPV6\r
+ /* Copy fields from packet header into payload of this ICMP packet. */\r
+ memcpy(&(ICMPBUF->payload[0]), ICMPBUF, UIP_IPH_LEN + 8);\r
+\r
+ /* Set the ICMP type and code. */\r
+ ICMPBUF->type = ICMP_DEST_UNREACHABLE;\r
+ ICMPBUF->icode = ICMP_PORT_UNREACHABLE;\r
+\r
+ /* Calculate the ICMP checksum. */\r
+ ICMPBUF->icmpchksum = 0;\r
+ ICMPBUF->icmpchksum = ~uip_chksum((u16_t *)&(ICMPBUF->type), 36);\r
+\r
+ /* Set the IP destination address to be the source address of the\r
+ original packet. */\r
+ uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);\r
+\r
+ /* Set our IP address as the source address. */\r
+ uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);\r
+\r
+ /* The size of the ICMP destination unreachable packet is 36 + the\r
+ size of the IP header (20) = 56. */\r
+ uip_len = 36 + UIP_IPH_LEN;\r
+ ICMPBUF->len[0] = 0;\r
+ ICMPBUF->len[1] = (u8_t)uip_len;\r
+ ICMPBUF->ttl = UIP_TTL;\r
+ ICMPBUF->proto = UIP_PROTO_ICMP;\r
+\r
+ goto ip_send_nolen;\r
+#else /* UIP_CONF_ICMP_DEST_UNREACH */\r
+ goto drop;\r
+#endif /* UIP_CONF_ICMP_DEST_UNREACH */\r
+ \r
+ udp_found:\r
+ uip_conn = NULL;\r
+ uip_flags = UIP_NEWDATA;\r
+ uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];\r
+ uip_slen = 0;\r
+ UIP_UDP_APPCALL();\r
+\r
+ udp_send:\r
+ if(uip_slen == 0) {\r
+ goto drop;\r
+ }\r
+ uip_len = uip_slen + UIP_IPUDPH_LEN;\r
+\r
+#if UIP_CONF_IPV6\r
+ /* For IPv6, the IP length field does not include the IPv6 IP header\r
+ length. */\r
+ BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);\r
+ BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);\r
+#else /* UIP_CONF_IPV6 */\r
+ BUF->len[0] = (uip_len >> 8);\r
+ BUF->len[1] = (uip_len & 0xff);\r
+#endif /* UIP_CONF_IPV6 */\r
+\r
+ BUF->ttl = uip_udp_conn->ttl;\r
+ BUF->proto = UIP_PROTO_UDP;\r
+\r
+ UDPBUF->udplen = HTONS(uip_slen + UIP_UDPH_LEN);\r
+ UDPBUF->udpchksum = 0;\r
+\r
+ BUF->srcport = uip_udp_conn->lport;\r
+ BUF->destport = uip_udp_conn->rport;\r
+\r
+ uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);\r
+ uip_ipaddr_copy(&BUF->destipaddr, &uip_udp_conn->ripaddr);\r
+ \r
+ uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPTCPH_LEN];\r
+\r
+#if UIP_UDP_CHECKSUMS\r
+ /* Calculate UDP checksum. */\r
+ UDPBUF->udpchksum = ~(uip_udpchksum());\r
+ if(UDPBUF->udpchksum == 0) {\r
+ UDPBUF->udpchksum = 0xffff;\r
+ }\r
+#endif /* UIP_UDP_CHECKSUMS */\r
+ \r
+ goto ip_send_nolen;\r
+#endif /* UIP_UDP */\r
+ \r
+ /* TCP input processing. */\r
+ tcp_input:\r
+ UIP_STAT(++uip_stat.tcp.recv);\r
+\r
+ /* Start of TCP input header processing code. */\r
+ \r
+ if(uip_tcpchksum() != 0xffff) { /* Compute and check the TCP\r
+ checksum. */\r
+ UIP_STAT(++uip_stat.tcp.drop);\r
+ UIP_STAT(++uip_stat.tcp.chkerr);\r
+ UIP_LOG("tcp: bad checksum.");\r
+ goto drop;\r
+ }\r
+ \r
+ /* Demultiplex this segment. */\r
+ /* First check any active connections. */\r
+ for(uip_connr = &uip_conns[0]; uip_connr <= &uip_conns[UIP_CONNS - 1];\r
+ ++uip_connr) {\r
+ if(uip_connr->tcpstateflags != UIP_CLOSED &&\r
+ BUF->destport == uip_connr->lport &&\r
+ BUF->srcport == uip_connr->rport &&\r
+ uip_ipaddr_cmp(&BUF->srcipaddr, &uip_connr->ripaddr)) {\r
+ goto found;\r
+ }\r
+ }\r
+\r
+ /* If we didn't find and active connection that expected the packet,\r
+ either this packet is an old duplicate, or this is a SYN packet\r
+ destined for a connection in LISTEN. If the SYN flag isn't set,\r
+ it is an old packet and we send a RST. */\r
+ if((BUF->flags & TCP_CTL) != TCP_SYN) {\r
+ goto reset;\r
+ }\r
+ \r
+ tmp16 = BUF->destport;\r
+ /* Next, check listening connections. */\r
+ for(c = 0; c < UIP_LISTENPORTS; ++c) {\r
+ if(tmp16 == uip_listenports[c]) {\r
+ goto found_listen;\r
+ }\r
+ }\r
+ \r
+ /* No matching connection found, so we send a RST packet. */\r
+ UIP_STAT(++uip_stat.tcp.synrst);\r
+\r
+ reset:\r
+ /* We do not send resets in response to resets. */\r
+ if(BUF->flags & TCP_RST) {\r
+ goto drop;\r
+ }\r
+\r
+ UIP_STAT(++uip_stat.tcp.rst);\r
+ \r
+ BUF->flags = TCP_RST | TCP_ACK;\r
+ uip_len = UIP_IPTCPH_LEN;\r
+ BUF->tcpoffset = 5 << 4;\r
+\r
+ /* Flip the seqno and ackno fields in the TCP header. */\r
+ c = BUF->seqno[3];\r
+ BUF->seqno[3] = BUF->ackno[3];\r
+ BUF->ackno[3] = c;\r
+ \r
+ c = BUF->seqno[2];\r
+ BUF->seqno[2] = BUF->ackno[2];\r
+ BUF->ackno[2] = c;\r
+ \r
+ c = BUF->seqno[1];\r
+ BUF->seqno[1] = BUF->ackno[1];\r
+ BUF->ackno[1] = c;\r
+ \r
+ c = BUF->seqno[0];\r
+ BUF->seqno[0] = BUF->ackno[0];\r
+ BUF->ackno[0] = c;\r
+\r
+ /* We also have to increase the sequence number we are\r
+ acknowledging. If the least significant byte overflowed, we need\r
+ to propagate the carry to the other bytes as well. */\r
+ if(++BUF->ackno[3] == 0) {\r
+ if(++BUF->ackno[2] == 0) {\r
+ if(++BUF->ackno[1] == 0) {\r
+ ++BUF->ackno[0];\r
+ }\r
+ }\r
+ }\r
+ \r
+ /* Swap port numbers. */\r
+ tmp16 = BUF->srcport;\r
+ BUF->srcport = BUF->destport;\r
+ BUF->destport = tmp16;\r
+ \r
+ /* Swap IP addresses. */\r
+ uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);\r
+ uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);\r
+ \r
+ /* And send out the RST packet! */\r
+ goto tcp_send_noconn;\r
+\r
+ /* This label will be jumped to if we matched the incoming packet\r
+ with a connection in LISTEN. In that case, we should create a new\r
+ connection and send a SYNACK in return. */\r
+ found_listen:\r
+ /* First we check if there are any connections avaliable. Unused\r
+ connections are kept in the same table as used connections, but\r
+ unused ones have the tcpstate set to CLOSED. Also, connections in\r
+ TIME_WAIT are kept track of and we'll use the oldest one if no\r
+ CLOSED connections are found. Thanks to Eddie C. Dost for a very\r
+ nice algorithm for the TIME_WAIT search. */\r
+ uip_connr = 0;\r
+ for(c = 0; c < UIP_CONNS; ++c) {\r
+ if(uip_conns[c].tcpstateflags == UIP_CLOSED) {\r
+ uip_connr = &uip_conns[c];\r
+ break;\r
+ }\r
+ if(uip_conns[c].tcpstateflags == UIP_TIME_WAIT) {\r
+ if(uip_connr == 0 ||\r
+ uip_conns[c].timer > uip_connr->timer) {\r
+ uip_connr = &uip_conns[c];\r
+ }\r
+ }\r
+ }\r
+\r
+ if(uip_connr == 0) {\r
+ /* All connections are used already, we drop packet and hope that\r
+ the remote end will retransmit the packet at a time when we\r
+ have more spare connections. */\r
+ UIP_STAT(++uip_stat.tcp.syndrop);\r
+ UIP_LOG("tcp: found no unused connections.");\r
+ goto drop;\r
+ }\r
+ uip_conn = uip_connr;\r
+ \r
+ /* Fill in the necessary fields for the new connection. */\r
+ uip_connr->rto = uip_connr->timer = UIP_RTO;\r
+ uip_connr->sa = 0;\r
+ uip_connr->sv = 4;\r
+ uip_connr->nrtx = 0;\r
+ uip_connr->lport = BUF->destport;\r
+ uip_connr->rport = BUF->srcport;\r
+ uip_ipaddr_copy(&uip_connr->ripaddr, &BUF->srcipaddr);\r
+ uip_connr->tcpstateflags = UIP_SYN_RCVD;\r
+\r
+ uip_connr->snd_nxt[0] = iss[0];\r
+ uip_connr->snd_nxt[1] = iss[1];\r
+ uip_connr->snd_nxt[2] = iss[2];\r
+ uip_connr->snd_nxt[3] = iss[3];\r
+ uip_connr->len = 1;\r
+\r
+ /* rcv_nxt should be the seqno from the incoming packet + 1. */\r
+ uip_connr->rcv_nxt[3] = BUF->seqno[3];\r
+ uip_connr->rcv_nxt[2] = BUF->seqno[2];\r
+ uip_connr->rcv_nxt[1] = BUF->seqno[1];\r
+ uip_connr->rcv_nxt[0] = BUF->seqno[0];\r
+ uip_add_rcv_nxt(1);\r
+\r
+ /* Parse the TCP MSS option, if present. */\r
+ if((BUF->tcpoffset & 0xf0) > 0x50) {\r
+ for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) {\r
+ opt = uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + c];\r
+ if(opt == TCP_OPT_END) {\r
+ /* End of options. */\r
+ break;\r
+ } else if(opt == TCP_OPT_NOOP) {\r
+ ++c;\r
+ /* NOP option. */\r
+ } else if(opt == TCP_OPT_MSS &&\r
+ uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) {\r
+ /* An MSS option with the right option length. */\r
+ tmp16 = ((u16_t)uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) |\r
+ (u16_t)uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + 3 + c];\r
+ uip_connr->initialmss = uip_connr->mss =\r
+ tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16;\r
+ \r
+ /* And we are done processing options. */\r
+ break;\r
+ } else {\r
+ /* All other options have a length field, so that we easily\r
+ can skip past them. */\r
+ if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) {\r
+ /* If the length field is zero, the options are malformed\r
+ and we don't process them further. */\r
+ break;\r
+ }\r
+ c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];\r
+ }\r
+ }\r
+ }\r
+ \r
+ /* Our response will be a SYNACK. */\r
+#if UIP_ACTIVE_OPEN\r
+ tcp_send_synack:\r
+ BUF->flags = TCP_ACK;\r
+ \r
+ tcp_send_syn:\r
+ BUF->flags |= TCP_SYN;\r
+#else /* UIP_ACTIVE_OPEN */\r
+ tcp_send_synack:\r
+ BUF->flags = TCP_SYN | TCP_ACK;\r
+#endif /* UIP_ACTIVE_OPEN */\r
+ \r
+ /* We send out the TCP Maximum Segment Size option with our\r
+ SYNACK. */\r
+ BUF->optdata[0] = TCP_OPT_MSS;\r
+ BUF->optdata[1] = TCP_OPT_MSS_LEN;\r
+ BUF->optdata[2] = (UIP_TCP_MSS) / 256;\r
+ BUF->optdata[3] = (UIP_TCP_MSS) & 255;\r
+ uip_len = UIP_IPTCPH_LEN + TCP_OPT_MSS_LEN;\r
+ BUF->tcpoffset = ((UIP_TCPH_LEN + TCP_OPT_MSS_LEN) / 4) << 4;\r
+ goto tcp_send;\r
+\r
+ /* This label will be jumped to if we found an active connection. */\r
+ found:\r
+ uip_conn = uip_connr;\r
+ uip_flags = 0;\r
+ /* We do a very naive form of TCP reset processing; we just accept\r
+ any RST and kill our connection. We should in fact check if the\r
+ sequence number of this reset is wihtin our advertised window\r
+ before we accept the reset. */\r
+ if(BUF->flags & TCP_RST) {\r
+ uip_connr->tcpstateflags = UIP_CLOSED;\r
+ UIP_LOG("tcp: got reset, aborting connection.");\r
+ uip_flags = UIP_ABORT;\r
+ UIP_APPCALL();\r
+ goto drop;\r
+ }\r
+ /* Calculate the length of the data, if the application has sent\r
+ any data to us. */\r
+ c = (BUF->tcpoffset >> 4) << 2;\r
+ /* uip_len will contain the length of the actual TCP data. This is\r
+ calculated by subtracing the length of the TCP header (in\r
+ c) and the length of the IP header (20 bytes). */\r
+ uip_len = uip_len - c - UIP_IPH_LEN;\r
+\r
+ /* First, check if the sequence number of the incoming packet is\r
+ what we're expecting next. If not, we send out an ACK with the\r
+ correct numbers in. */\r
+ if(!(((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_SYN_SENT) &&\r
+ ((BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)))) {\r
+ if((uip_len > 0 || ((BUF->flags & (TCP_SYN | TCP_FIN)) != 0)) &&\r
+ (BUF->seqno[0] != uip_connr->rcv_nxt[0] ||\r
+ BUF->seqno[1] != uip_connr->rcv_nxt[1] ||\r
+ BUF->seqno[2] != uip_connr->rcv_nxt[2] ||\r
+ BUF->seqno[3] != uip_connr->rcv_nxt[3])) {\r
+ goto tcp_send_ack;\r
+ }\r
+ }\r
+\r
+ /* Next, check if the incoming segment acknowledges any outstanding\r
+ data. If so, we update the sequence number, reset the length of\r
+ the outstanding data, calculate RTT estimations, and reset the\r
+ retransmission timer. */\r
+ if((BUF->flags & TCP_ACK) && uip_outstanding(uip_connr)) {\r
+ uip_add32(uip_connr->snd_nxt, uip_connr->len);\r
+\r
+ if(BUF->ackno[0] == uip_acc32[0] &&\r
+ BUF->ackno[1] == uip_acc32[1] &&\r
+ BUF->ackno[2] == uip_acc32[2] &&\r
+ BUF->ackno[3] == uip_acc32[3]) {\r
+ /* Update sequence number. */\r
+ uip_connr->snd_nxt[0] = uip_acc32[0];\r
+ uip_connr->snd_nxt[1] = uip_acc32[1];\r
+ uip_connr->snd_nxt[2] = uip_acc32[2];\r
+ uip_connr->snd_nxt[3] = uip_acc32[3];\r
+ \r
+ /* Do RTT estimation, unless we have done retransmissions. */\r
+ if(uip_connr->nrtx == 0) {\r
+ signed char m;\r
+ m = uip_connr->rto - uip_connr->timer;\r
+ /* This is taken directly from VJs original code in his paper */\r
+ m = m - (uip_connr->sa >> 3);\r
+ uip_connr->sa += m;\r
+ if(m < 0) {\r
+ m = -m;\r
+ }\r
+ m = m - (uip_connr->sv >> 2);\r
+ uip_connr->sv += m;\r
+ uip_connr->rto = (uip_connr->sa >> 3) + uip_connr->sv;\r
+\r
+ }\r
+ /* Set the acknowledged flag. */\r
+ uip_flags = UIP_ACKDATA;\r
+ /* Reset the retransmission timer. */\r
+ uip_connr->timer = uip_connr->rto;\r
+\r
+ /* Reset length of outstanding data. */\r
+ uip_connr->len = 0;\r
+ }\r
+ \r
+ }\r
+\r
+ /* Do different things depending on in what state the connection is. */\r
+ switch(uip_connr->tcpstateflags & UIP_TS_MASK) {\r
+ /* CLOSED and LISTEN are not handled here. CLOSE_WAIT is not\r
+ implemented, since we force the application to close when the\r
+ peer sends a FIN (hence the application goes directly from\r
+ ESTABLISHED to LAST_ACK). */\r
+ case UIP_SYN_RCVD:\r
+ /* In SYN_RCVD we have sent out a SYNACK in response to a SYN, and\r
+ we are waiting for an ACK that acknowledges the data we sent\r
+ out the last time. Therefore, we want to have the UIP_ACKDATA\r
+ flag set. If so, we enter the ESTABLISHED state. */\r
+ if(uip_flags & UIP_ACKDATA) {\r
+ uip_connr->tcpstateflags = UIP_ESTABLISHED;\r
+ uip_flags = UIP_CONNECTED;\r
+ uip_connr->len = 0;\r
+ if(uip_len > 0) {\r
+ uip_flags |= UIP_NEWDATA;\r
+ uip_add_rcv_nxt(uip_len);\r
+ }\r
+ uip_slen = 0;\r
+ UIP_APPCALL();\r
+ goto appsend;\r
+ }\r
+ goto drop;\r
+#if UIP_ACTIVE_OPEN\r
+ case UIP_SYN_SENT:\r
+ /* In SYN_SENT, we wait for a SYNACK that is sent in response to\r
+ our SYN. The rcv_nxt is set to sequence number in the SYNACK\r
+ plus one, and we send an ACK. We move into the ESTABLISHED\r
+ state. */\r
+ if((uip_flags & UIP_ACKDATA) &&\r
+ (BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)) {\r
+\r
+ /* Parse the TCP MSS option, if present. */\r
+ if((BUF->tcpoffset & 0xf0) > 0x50) {\r
+ for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) {\r
+ opt = uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + c];\r
+ if(opt == TCP_OPT_END) {\r
+ /* End of options. */\r
+ break;\r
+ } else if(opt == TCP_OPT_NOOP) {\r
+ ++c;\r
+ /* NOP option. */\r
+ } else if(opt == TCP_OPT_MSS &&\r
+ uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) {\r
+ /* An MSS option with the right option length. */\r
+ tmp16 = (uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) |\r
+ uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 3 + c];\r
+ uip_connr->initialmss =\r
+ uip_connr->mss = tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16;\r
+\r
+ /* And we are done processing options. */\r
+ break;\r
+ } else {\r
+ /* All other options have a length field, so that we easily\r
+ can skip past them. */\r
+ if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) {\r
+ /* If the length field is zero, the options are malformed\r
+ and we don't process them further. */\r
+ break;\r
+ }\r
+ c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];\r
+ }\r
+ }\r
+ }\r
+ uip_connr->tcpstateflags = UIP_ESTABLISHED;\r
+ uip_connr->rcv_nxt[0] = BUF->seqno[0];\r
+ uip_connr->rcv_nxt[1] = BUF->seqno[1];\r
+ uip_connr->rcv_nxt[2] = BUF->seqno[2];\r
+ uip_connr->rcv_nxt[3] = BUF->seqno[3];\r
+ uip_add_rcv_nxt(1);\r
+ uip_flags = UIP_CONNECTED | UIP_NEWDATA;\r
+ uip_connr->len = 0;\r
+ uip_len = 0;\r
+ uip_slen = 0;\r
+ UIP_APPCALL();\r
+ goto appsend;\r
+ }\r
+ /* Inform the application that the connection failed */\r
+ uip_flags = UIP_ABORT;\r
+ UIP_APPCALL();\r
+ /* The connection is closed after we send the RST */\r
+ uip_conn->tcpstateflags = UIP_CLOSED;\r
+ goto reset;\r
+#endif /* UIP_ACTIVE_OPEN */\r
+ \r
+ case UIP_ESTABLISHED:\r
+ /* In the ESTABLISHED state, we call upon the application to feed\r
+ data into the uip_buf. If the UIP_ACKDATA flag is set, the\r
+ application should put new data into the buffer, otherwise we are\r
+ retransmitting an old segment, and the application should put that\r
+ data into the buffer.\r
+\r
+ If the incoming packet is a FIN, we should close the connection on\r
+ this side as well, and we send out a FIN and enter the LAST_ACK\r
+ state. We require that there is no outstanding data; otherwise the\r
+ sequence numbers will be screwed up. */\r
+\r
+ if(BUF->flags & TCP_FIN && !(uip_connr->tcpstateflags & UIP_STOPPED)) {\r
+ if(uip_outstanding(uip_connr)) {\r
+ goto drop;\r
+ }\r
+ uip_add_rcv_nxt(1 + uip_len);\r
+ uip_flags |= UIP_CLOSE;\r
+ if(uip_len > 0) {\r
+ uip_flags |= UIP_NEWDATA;\r
+ }\r
+ UIP_APPCALL();\r
+ uip_connr->len = 1;\r
+ uip_connr->tcpstateflags = UIP_LAST_ACK;\r
+ uip_connr->nrtx = 0;\r
+ tcp_send_finack:\r
+ BUF->flags = TCP_FIN | TCP_ACK;\r
+ goto tcp_send_nodata;\r
+ }\r
+\r
+ /* Check the URG flag. If this is set, the segment carries urgent\r
+ data that we must pass to the application. */\r
+ if((BUF->flags & TCP_URG) != 0) {\r
+#if UIP_URGDATA > 0\r
+ uip_urglen = (BUF->urgp[0] << 8) | BUF->urgp[1];\r
+ if(uip_urglen > uip_len) {\r
+ /* There is more urgent data in the next segment to come. */\r
+ uip_urglen = uip_len;\r
+ }\r
+ uip_add_rcv_nxt(uip_urglen);\r
+ uip_len -= uip_urglen;\r
+ uip_urgdata = uip_appdata;\r
+ uip_appdata += uip_urglen;\r
+ } else {\r
+ uip_urglen = 0;\r
+#else /* UIP_URGDATA > 0 */\r
+ uip_appdata = ((char *)uip_appdata) + ((BUF->urgp[0] << 8) | BUF->urgp[1]);\r
+ uip_len -= (BUF->urgp[0] << 8) | BUF->urgp[1];\r
+#endif /* UIP_URGDATA > 0 */\r
+ }\r
+\r
+ /* If uip_len > 0 we have TCP data in the packet, and we flag this\r
+ by setting the UIP_NEWDATA flag and update the sequence number\r
+ we acknowledge. If the application has stopped the dataflow\r
+ using uip_stop(), we must not accept any data packets from the\r
+ remote host. */\r
+ if(uip_len > 0 && !(uip_connr->tcpstateflags & UIP_STOPPED)) {\r
+ uip_flags |= UIP_NEWDATA;\r
+ uip_add_rcv_nxt(uip_len);\r
+ }\r
+\r
+ /* Check if the available buffer space advertised by the other end\r
+ is smaller than the initial MSS for this connection. If so, we\r
+ set the current MSS to the window size to ensure that the\r
+ application does not send more data than the other end can\r
+ handle.\r
+\r
+ If the remote host advertises a zero window, we set the MSS to\r
+ the initial MSS so that the application will send an entire MSS\r
+ of data. This data will not be acknowledged by the receiver,\r
+ and the application will retransmit it. This is called the\r
+ "persistent timer" and uses the retransmission mechanim.\r
+ */\r
+ tmp16 = ((u16_t)BUF->wnd[0] << 8) + (u16_t)BUF->wnd[1];\r
+ if(tmp16 > uip_connr->initialmss ||\r
+ tmp16 == 0) {\r
+ tmp16 = uip_connr->initialmss;\r
+ }\r
+ uip_connr->mss = tmp16;\r
+\r
+ /* If this packet constitutes an ACK for outstanding data (flagged\r
+ by the UIP_ACKDATA flag, we should call the application since it\r
+ might want to send more data. If the incoming packet had data\r
+ from the peer (as flagged by the UIP_NEWDATA flag), the\r
+ application must also be notified.\r
+\r
+ When the application is called, the global variable uip_len\r
+ contains the length of the incoming data. The application can\r
+ access the incoming data through the global pointer\r
+ uip_appdata, which usually points UIP_IPTCPH_LEN + UIP_LLH_LEN\r
+ bytes into the uip_buf array.\r
+\r
+ If the application wishes to send any data, this data should be\r
+ put into the uip_appdata and the length of the data should be\r
+ put into uip_len. If the application don't have any data to\r
+ send, uip_len must be set to 0. */\r
+ if(uip_flags & (UIP_NEWDATA | UIP_ACKDATA)) {\r
+ uip_slen = 0;\r
+ UIP_APPCALL();\r
+\r
+ appsend:\r
+ \r
+ if(uip_flags & UIP_ABORT) {\r
+ uip_slen = 0;\r
+ uip_connr->tcpstateflags = UIP_CLOSED;\r
+ BUF->flags = TCP_RST | TCP_ACK;\r
+ goto tcp_send_nodata;\r
+ }\r
+\r
+ if(uip_flags & UIP_CLOSE) {\r
+ uip_slen = 0;\r
+ uip_connr->len = 1;\r
+ uip_connr->tcpstateflags = UIP_FIN_WAIT_1;\r
+ uip_connr->nrtx = 0;\r
+ BUF->flags = TCP_FIN | TCP_ACK;\r
+ goto tcp_send_nodata;\r
+ }\r
+\r
+ /* If uip_slen > 0, the application has data to be sent. */\r
+ if(uip_slen > 0) {\r
+\r
+ /* If the connection has acknowledged data, the contents of\r
+ the ->len variable should be discarded. */\r
+ if((uip_flags & UIP_ACKDATA) != 0) {\r
+ uip_connr->len = 0;\r
+ }\r
+\r
+ /* If the ->len variable is non-zero the connection has\r
+ already data in transit and cannot send anymore right\r
+ now. */\r
+ if(uip_connr->len == 0) {\r
+\r
+ /* The application cannot send more than what is allowed by\r
+ the mss (the minumum of the MSS and the available\r
+ window). */\r
+ if(uip_slen > uip_connr->mss) {\r
+ uip_slen = uip_connr->mss;\r
+ }\r
+\r
+ /* Remember how much data we send out now so that we know\r
+ when everything has been acknowledged. */\r
+ uip_connr->len = uip_slen;\r
+ } else {\r
+\r
+ /* If the application already had unacknowledged data, we\r
+ make sure that the application does not send (i.e.,\r
+ retransmit) out more than it previously sent out. */\r
+ uip_slen = uip_connr->len;\r
+ }\r
+ }\r
+ uip_connr->nrtx = 0;\r
+ apprexmit:\r
+ uip_appdata = uip_sappdata;\r
+ \r
+ /* If the application has data to be sent, or if the incoming\r
+ packet had new data in it, we must send out a packet. */\r
+ if(uip_slen > 0 && uip_connr->len > 0) {\r
+ /* Add the length of the IP and TCP headers. */\r
+ uip_len = uip_connr->len + UIP_TCPIP_HLEN;\r
+ /* We always set the ACK flag in response packets. */\r
+ BUF->flags = TCP_ACK | TCP_PSH;\r
+ /* Send the packet. */\r
+ goto tcp_send_noopts;\r
+ }\r
+ /* If there is no data to send, just send out a pure ACK if\r
+ there is newdata. */\r
+ if(uip_flags & UIP_NEWDATA) {\r
+ uip_len = UIP_TCPIP_HLEN;\r
+ BUF->flags = TCP_ACK;\r
+ goto tcp_send_noopts;\r
+ }\r
+ }\r
+ goto drop;\r
+ case UIP_LAST_ACK:\r
+ /* We can close this connection if the peer has acknowledged our\r
+ FIN. This is indicated by the UIP_ACKDATA flag. */\r
+ if(uip_flags & UIP_ACKDATA) {\r
+ uip_connr->tcpstateflags = UIP_CLOSED;\r
+ uip_flags = UIP_CLOSE;\r
+ UIP_APPCALL();\r
+ }\r
+ break;\r
+ \r
+ case UIP_FIN_WAIT_1:\r
+ /* The application has closed the connection, but the remote host\r
+ hasn't closed its end yet. Thus we do nothing but wait for a\r
+ FIN from the other side. */\r
+ if(uip_len > 0) {\r
+ uip_add_rcv_nxt(uip_len);\r
+ }\r
+ if(BUF->flags & TCP_FIN) {\r
+ if(uip_flags & UIP_ACKDATA) {\r
+ uip_connr->tcpstateflags = UIP_TIME_WAIT;\r
+ uip_connr->timer = 0;\r
+ uip_connr->len = 0;\r
+ } else {\r
+ uip_connr->tcpstateflags = UIP_CLOSING;\r
+ }\r
+ uip_add_rcv_nxt(1);\r
+ uip_flags = UIP_CLOSE;\r
+ UIP_APPCALL();\r
+ goto tcp_send_ack;\r
+ } else if(uip_flags & UIP_ACKDATA) {\r
+ uip_connr->tcpstateflags = UIP_FIN_WAIT_2;\r
+ uip_connr->len = 0;\r
+ goto drop;\r
+ }\r
+ if(uip_len > 0) {\r
+ goto tcp_send_ack;\r
+ }\r
+ goto drop;\r
+ \r
+ case UIP_FIN_WAIT_2:\r
+ if(uip_len > 0) {\r
+ uip_add_rcv_nxt(uip_len);\r
+ }\r
+ if(BUF->flags & TCP_FIN) {\r
+ uip_connr->tcpstateflags = UIP_TIME_WAIT;\r
+ uip_connr->timer = 0;\r
+ uip_add_rcv_nxt(1);\r
+ uip_flags = UIP_CLOSE;\r
+ UIP_APPCALL();\r
+ goto tcp_send_ack;\r
+ }\r
+ if(uip_len > 0) {\r
+ goto tcp_send_ack;\r
+ }\r
+ goto drop;\r
+\r
+ case UIP_TIME_WAIT:\r
+ goto tcp_send_ack;\r
+ \r
+ case UIP_CLOSING:\r
+ if(uip_flags & UIP_ACKDATA) {\r
+ uip_connr->tcpstateflags = UIP_TIME_WAIT;\r
+ uip_connr->timer = 0;\r
+ }\r
+ }\r
+ goto drop;\r
+ \r
+ /* We jump here when we are ready to send the packet, and just want\r
+ to set the appropriate TCP sequence numbers in the TCP header. */\r
+ tcp_send_ack:\r
+ BUF->flags = TCP_ACK;\r
+\r
+ tcp_send_nodata:\r
+ uip_len = UIP_IPTCPH_LEN;\r
+\r
+ tcp_send_noopts:\r
+ BUF->tcpoffset = (UIP_TCPH_LEN / 4) << 4;\r
+\r
+ /* We're done with the input processing. We are now ready to send a\r
+ reply. Our job is to fill in all the fields of the TCP and IP\r
+ headers before calculating the checksum and finally send the\r
+ packet. */\r
+ tcp_send:\r
+ BUF->ackno[0] = uip_connr->rcv_nxt[0];\r
+ BUF->ackno[1] = uip_connr->rcv_nxt[1];\r
+ BUF->ackno[2] = uip_connr->rcv_nxt[2];\r
+ BUF->ackno[3] = uip_connr->rcv_nxt[3];\r
+ \r
+ BUF->seqno[0] = uip_connr->snd_nxt[0];\r
+ BUF->seqno[1] = uip_connr->snd_nxt[1];\r
+ BUF->seqno[2] = uip_connr->snd_nxt[2];\r
+ BUF->seqno[3] = uip_connr->snd_nxt[3];\r
+\r
+ BUF->proto = UIP_PROTO_TCP;\r
+ \r
+ BUF->srcport = uip_connr->lport;\r
+ BUF->destport = uip_connr->rport;\r
+\r
+ uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);\r
+ uip_ipaddr_copy(&BUF->destipaddr, &uip_connr->ripaddr);\r
+\r
+ if(uip_connr->tcpstateflags & UIP_STOPPED) {\r
+ /* If the connection has issued uip_stop(), we advertise a zero\r
+ window so that the remote host will stop sending data. */\r
+ BUF->wnd[0] = BUF->wnd[1] = 0;\r
+ } else {\r
+ BUF->wnd[0] = ((UIP_RECEIVE_WINDOW) >> 8);\r
+ BUF->wnd[1] = ((UIP_RECEIVE_WINDOW) & 0xff);\r
+ }\r
+\r
+ tcp_send_noconn:\r
+ BUF->ttl = UIP_TTL;\r
+#if UIP_CONF_IPV6\r
+ /* For IPv6, the IP length field does not include the IPv6 IP header\r
+ length. */\r
+ BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);\r
+ BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);\r
+#else /* UIP_CONF_IPV6 */\r
+ BUF->len[0] = (uip_len >> 8);\r
+ BUF->len[1] = (uip_len & 0xff);\r
+#endif /* UIP_CONF_IPV6 */\r
+\r
+ BUF->urgp[0] = BUF->urgp[1] = 0;\r
+ \r
+ /* Calculate TCP checksum. */\r
+ BUF->tcpchksum = 0;\r
+ BUF->tcpchksum = ~(uip_tcpchksum());\r
+\r
+ ip_send_nolen:\r
+#if UIP_CONF_IPV6\r
+ BUF->vtc = 0x60;\r
+ BUF->tcflow = 0x00;\r
+ BUF->flow = 0x00;\r
+#else /* UIP_CONF_IPV6 */\r
+ BUF->vhl = 0x45;\r
+ BUF->tos = 0;\r
+ BUF->ipoffset[0] = BUF->ipoffset[1] = 0;\r
+ ++ipid;\r
+ BUF->ipid[0] = ipid >> 8;\r
+ BUF->ipid[1] = ipid & 0xff;\r
+ /* Calculate IP checksum. */\r
+ BUF->ipchksum = 0;\r
+ BUF->ipchksum = ~(uip_ipchksum());\r
+ DEBUG_PRINTF("uip ip_send_nolen: chkecum 0x%04x\n", uip_ipchksum());\r
+#endif /* UIP_CONF_IPV6 */ \r
+ UIP_STAT(++uip_stat.tcp.sent);\r
+#if UIP_CONF_IPV6\r
+ send:\r
+#endif /* UIP_CONF_IPV6 */\r
+ DEBUG_PRINTF("Sending packet with length %d (%d)\n", uip_len,\r
+ (BUF->len[0] << 8) | BUF->len[1]);\r
+ \r
+ UIP_STAT(++uip_stat.ip.sent);\r
+ /* Return and let the caller do the actual transmission. */\r
+ uip_flags = 0;\r
+ return;\r
+\r
+ drop:\r
+ uip_len = 0;\r
+ uip_flags = 0;\r
+ return;\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+u16_t\r
+htons(u16_t val)\r
+{\r
+ return HTONS(val);\r
+}\r
+\r
+u32_t\r
+htonl(u32_t val)\r
+{\r
+ return HTONL(val);\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+void\r
+uip_send(const void *data, int len)\r
+{\r
+ int copylen;\r
+#define MIN(a,b) ((a) < (b)? (a): (b))\r
+ copylen = MIN(len, UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN -\r
+ (int)((char *)uip_sappdata - (char *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]));\r
+ if(copylen > 0) {\r
+ uip_slen = copylen;\r
+ if(data != uip_sappdata) {\r
+ memcpy(uip_sappdata, (data), uip_slen);\r
+ }\r
+ }\r
+}\r
+/*---------------------------------------------------------------------------*/\r
+/** @} */\r
+#endif /* UIP_CONF_IPV6 */\r
projects / pub / USBasp.git / commitdiff