Documentation: Fix Doxygen grouping.

diff --git a/Bootloaders/MassStorage/Lib/VirtualFAT.h b/Bootloaders/MassStorage/Lib/VirtualFAT.h
index 07abb9e..2ecad9b 100644 (file)
--- a/Bootloaders/MassStorage/Lib/VirtualFAT.h
+++ b/Bootloaders/MassStorage/Lib/VirtualFAT.h
@@ -126,7 +126,7 @@
                   (uint8_t)(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(n0)+n1)+n2)+n3)+n4)+n5)+n6)+n7)+e0)+e1)+e2)
 
                /** \name FAT Filesystem Flags */
                   (uint8_t)(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(n0)+n1)+n2)+n3)+n4)+n5)+n6)+n7)+e0)+e1)+e2)
 
                /** \name FAT Filesystem Flags */

-               //@{
+               /**@{*/

                /** FAT attribute flag to indicate a read-only file. */
                #define FAT_FLAG_READONLY         (1 << 0)
 
                /** FAT attribute flag to indicate a read-only file. */
                #define FAT_FLAG_READONLY         (1 << 0)
 


@@ -150,7 +150,7 @@
 
                /** Ordinal flag marker for FAT Long File Name entries to mark the last entry. */
                #define FAT_ORDINAL_LAST_ENTRY    (1 << 6)
 
                /** Ordinal flag marker for FAT Long File Name entries to mark the last entry. */
                #define FAT_ORDINAL_LAST_ENTRY    (1 << 6)

-               //@}
+               /**@}*/

 
        /* Enums: */
                /** Enum for the Root FAT file entry indexes on the disk. This can be used
 
        /* Enums: */
                /** Enum for the Root FAT file entry indexes on the disk. This can be used

diff --git a/LUFA/CodeTemplates/DriverStubs/Board.h b/LUFA/CodeTemplates/DriverStubs/Board.h
index 9e5f04b..7b33caf 100644 (file)
--- a/LUFA/CodeTemplates/DriverStubs/Board.h
+++ b/LUFA/CodeTemplates/DriverStubs/Board.h
@@ -77,6 +77,3 @@
                #endif
 
 #endif
                #endif
 
 #endif

-
-/** @} */
-

diff --git a/LUFA/Common/Endianness.h b/LUFA/Common/Endianness.h
index 32ef463..cdc90e5 100644 (file)
--- a/LUFA/Common/Endianness.h
+++ b/LUFA/Common/Endianness.h
@@ -122,7 +122,7 @@
                                #define CPU_TO_BE32(x)           (x)
                        #elif !defined(le16_to_cpu)
                                /** \name Run-time endianness conversion */
                                #define CPU_TO_BE32(x)           (x)
                        #elif !defined(le16_to_cpu)
                                /** \name Run-time endianness conversion */

-                               //@{
+                               /**@{*/

 
                                /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
                                 *  Endianness of the currently selected CPU architecture.
 
                                /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
                                 *  Endianness of the currently selected CPU architecture.


@@ -252,10 +252,10 @@
                                 */
                                #define cpu_to_be32(x)           SwapEndian_32(x)
 
                                 */
                                #define cpu_to_be32(x)           SwapEndian_32(x)
 

-                               //@}
+                               /**@}*/

 
                                /** \name Compile-time endianness conversion */
 
                                /** \name Compile-time endianness conversion */

-                               //@{
+                               /**@{*/

 
                                /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
                                 *  Endianness of the currently selected CPU architecture.
 
                                /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
                                 *  Endianness of the currently selected CPU architecture.


@@ -385,7 +385,7 @@
                                 */
                                #define CPU_TO_BE32(x)           SWAPENDIAN_32(x)
 
                                 */
                                #define CPU_TO_BE32(x)           SWAPENDIAN_32(x)
 

-                               //! @}
+                               /**@}*/

                        #endif
 
                /* Inline Functions: */
                        #endif
 
                /* Inline Functions: */

diff --git a/LUFA/Drivers/Misc/AT45DB321C.h b/LUFA/Drivers/Misc/AT45DB321C.h
index d6b20a8..be16bc3 100644 (file)
--- a/LUFA/Drivers/Misc/AT45DB321C.h
+++ b/LUFA/Drivers/Misc/AT45DB321C.h
@@ -48,14 +48,14 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Dataflash Status Values */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Dataflash Status Values */

-                       //@{
+                       /**@{*/

                        #define DF_STATUS_READY                         (1 << 7)
                        #define DF_STATUS_COMPMISMATCH                  (1 << 6)
                        #define DF_STATUS_SECTORPROTECTION_ON           (1 << 1)
                        #define DF_STATUS_READY                         (1 << 7)
                        #define DF_STATUS_COMPMISMATCH                  (1 << 6)
                        #define DF_STATUS_SECTORPROTECTION_ON           (1 << 1)

-                       //@}
+                       /**@}*/

 
                        /** \name Dataflash Commands */
 
                        /** \name Dataflash Commands */

-                       //@{
+                       /**@{*/

                        #define DF_CMD_GETSTATUS                        0xD7
 
                        #define DF_CMD_MAINMEMTOBUFF1                   0x53
                        #define DF_CMD_GETSTATUS                        0xD7
 
                        #define DF_CMD_MAINMEMTOBUFF1                   0x53


@@ -89,7 +89,7 @@
                        #define DF_CMD_SECTORPROTECTIONOFF_BYTE4        0xCF
 
                        #define DF_CMD_READMANUFACTURERDEVICEINFO       0x9F
                        #define DF_CMD_SECTORPROTECTIONOFF_BYTE4        0xCF
 
                        #define DF_CMD_READMANUFACTURERDEVICEINFO       0x9F

-                       //@}
+                       /**@}*/

 
                        /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */
                        #define DF_MANUFACTURER_ATMEL                   0x1F
 
                        /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */
                        #define DF_MANUFACTURER_ATMEL                   0x1F

diff --git a/LUFA/Drivers/Misc/AT45DB642D.h b/LUFA/Drivers/Misc/AT45DB642D.h
index 95b1c75..c332bd6 100644 (file)
--- a/LUFA/Drivers/Misc/AT45DB642D.h
+++ b/LUFA/Drivers/Misc/AT45DB642D.h
@@ -48,15 +48,15 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Dataflash Status Values */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Dataflash Status Values */

-                       //@{
+                       /**@{*/

                        #define DF_STATUS_READY                         (1 << 7)
                        #define DF_STATUS_COMPMISMATCH                  (1 << 6)
                        #define DF_STATUS_SECTORPROTECTION_ON           (1 << 1)
                        #define DF_STATUS_BINARYPAGESIZE_ON             (1 << 0)
                        #define DF_STATUS_READY                         (1 << 7)
                        #define DF_STATUS_COMPMISMATCH                  (1 << 6)
                        #define DF_STATUS_SECTORPROTECTION_ON           (1 << 1)
                        #define DF_STATUS_BINARYPAGESIZE_ON             (1 << 0)

-                       //@}
+                       /**@}*/

 
                        /** \name Dataflash Commands */
 
                        /** \name Dataflash Commands */

-                       //@{
+                       /**@{*/

                        #define DF_CMD_GETSTATUS                        0xD7
                        #define DF_CMD_POWERDOWN                        0xB9
                        #define DF_CMD_WAKEUP                           0xAB
                        #define DF_CMD_GETSTATUS                        0xD7
                        #define DF_CMD_POWERDOWN                        0xB9
                        #define DF_CMD_WAKEUP                           0xAB


@@ -105,7 +105,7 @@
                        #define DF_CMD_BINARYPAGESIZEMODEON_BYTE4       0xA6
 
                        #define DF_CMD_READMANUFACTURERDEVICEINFO       0x9F
                        #define DF_CMD_BINARYPAGESIZEMODEON_BYTE4       0xA6
 
                        #define DF_CMD_READMANUFACTURERDEVICEINFO       0x9F

-                       //@}
+                       /**@}*/

 
                        /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */
                        #define DF_MANUFACTURER_ATMEL                   0x1F
 
                        /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */
                        #define DF_MANUFACTURER_ATMEL                   0x1F

diff --git a/LUFA/Drivers/Misc/TerminalCodes.h b/LUFA/Drivers/Misc/TerminalCodes.h
index e4bde41..62fc246 100644 (file)
--- a/LUFA/Drivers/Misc/TerminalCodes.h
+++ b/LUFA/Drivers/Misc/TerminalCodes.h
@@ -80,7 +80,7 @@
                        #endif
 
                        /** \name Text Display Modifier Control Sequences */
                        #endif
 
                        /** \name Text Display Modifier Control Sequences */

-                       //@{
+                       /**@{*/

                        /** Turns on bold so that any following text is printed to the terminal in bold. */
                        #define ESC_BOLD_ON                     ANSI_ESCAPE_SEQUENCE("1m")
 
                        /** Turns on bold so that any following text is printed to the terminal in bold. */
                        #define ESC_BOLD_ON                     ANSI_ESCAPE_SEQUENCE("1m")
 


@@ -114,10 +114,10 @@
                         *  the center.
                         */
                        #define ESC_STRIKETHROUGH_OFF           ANSI_ESCAPE_SEQUENCE("29m")
                         *  the center.
                         */
                        #define ESC_STRIKETHROUGH_OFF           ANSI_ESCAPE_SEQUENCE("29m")

-                       //@}
+                       /**@}*/

 
                        /** \name Text Colour Control Sequences */
 
                        /** \name Text Colour Control Sequences */

-                       //@{
+                       /**@{*/

                        /** Sets the foreground (text) colour to black. */
                        #define ESC_FG_BLACK                    ANSI_ESCAPE_SEQUENCE("30m")
 
                        /** Sets the foreground (text) colour to black. */
                        #define ESC_FG_BLACK                    ANSI_ESCAPE_SEQUENCE("30m")
 


@@ -171,10 +171,10 @@
 
                        /** Sets the text background colour to the terminal's default. */
                        #define ESC_BG_DEFAULT                  ANSI_ESCAPE_SEQUENCE("49m")
 
                        /** Sets the text background colour to the terminal's default. */
                        #define ESC_BG_DEFAULT                  ANSI_ESCAPE_SEQUENCE("49m")

-                       //@}
+                       /**@}*/

 
                        /** \name Cursor Positioning Control Sequences */
 
                        /** \name Cursor Positioning Control Sequences */

-                       //@{
+                       /**@{*/

                        /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
                        #define ESC_CURSOR_POS_SAVE             ANSI_ESCAPE_SEQUENCE("s")
 
                        /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
                        #define ESC_CURSOR_POS_SAVE             ANSI_ESCAPE_SEQUENCE("s")
 


@@ -211,10 +211,10 @@
                         *  \param[in] Columns  Number of columns to move the cursor position
                         */
                        #define ESC_CURSOR_BACKWARD(Columns)    ANSI_ESCAPE_SEQUENCE(#Columns "D")
                         *  \param[in] Columns  Number of columns to move the cursor position
                         */
                        #define ESC_CURSOR_BACKWARD(Columns)    ANSI_ESCAPE_SEQUENCE(#Columns "D")

-                       //@}
+                       /**@}*/

 
                        /** \name Miscellaneous Control Sequences */
 
                        /** \name Miscellaneous Control Sequences */

-                       //@{
+                       /**@{*/

                        /** Resets any escape sequence modifiers back to their defaults. */
                        #define ESC_RESET                       ANSI_ESCAPE_SEQUENCE("0m")
 
                        /** Resets any escape sequence modifiers back to their defaults. */
                        #define ESC_RESET                       ANSI_ESCAPE_SEQUENCE("0m")
 


@@ -223,7 +223,7 @@
 
                        /** Erases the current line, returning the cursor to the far left. */
                        #define ESC_ERASE_LINE                  ANSI_ESCAPE_SEQUENCE("K")
 
                        /** Erases the current line, returning the cursor to the far left. */
                        #define ESC_ERASE_LINE                  ANSI_ESCAPE_SEQUENCE("K")

-                       //@}
+                       /**@}*/

 
 #endif
 
 
 #endif
 

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index f464eef..7e5f2f1 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -100,7 +100,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name ADC Reference Configuration Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name ADC Reference Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** Reference mask, for using the voltage present at the AVR's AREF pin for the ADC reference. */
                        #define ADC_REFERENCE_AREF              0
 
                        /** Reference mask, for using the voltage present at the AVR's AREF pin for the ADC reference. */
                        #define ADC_REFERENCE_AREF              0
 


@@ -109,10 +109,10 @@
 
                        /** Reference mask, for using the internally generated 2.56V reference voltage as the ADC reference. */
                        #define ADC_REFERENCE_INT2560MV         ((1 << REFS1) | (1 << REFS0))
 
                        /** Reference mask, for using the internally generated 2.56V reference voltage as the ADC reference. */
                        #define ADC_REFERENCE_INT2560MV         ((1 << REFS1) | (1 << REFS0))

-                       //@}
+                       /**@}*/

 
                        /** \name ADC Result Adjustment Configuration Masks */
 
                        /** \name ADC Result Adjustment Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
                         *  \ref ADC_GetResult() macro contain the 8 most significant bits of the result.
                         */
                        /** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
                         *  \ref ADC_GetResult() macro contain the 8 most significant bits of the result.
                         */


@@ -122,10 +122,10 @@
                         *  \ref ADC_GetResult() macro contain the 8 least significant bits of the result.
                         */
                        #define ADC_RIGHT_ADJUSTED              (0 << ADLAR)
                         *  \ref ADC_GetResult() macro contain the 8 least significant bits of the result.
                         */
                        #define ADC_RIGHT_ADJUSTED              (0 << ADLAR)

-                       //@}
+                       /**@}*/

 
                        /** \name ADC Mode Configuration Masks */
 
                        /** \name ADC Mode Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
                         *  is capable of at the given input clock speed.
                         */
                        /** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
                         *  is capable of at the given input clock speed.
                         */


@@ -135,10 +135,10 @@
                         *  the ADC returns to idle.
                         */
                        #define ADC_SINGLE_CONVERSION           (0 << ADATE)
                         *  the ADC returns to idle.
                         */
                        #define ADC_SINGLE_CONVERSION           (0 << ADATE)

-                       //@}
+                       /**@}*/

 
                        /** \name ADC Prescaler Configuration Masks */
 
                        /** \name ADC Prescaler Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */
                        #define ADC_PRESCALE_2                  (1 << ADPS0)
 
                        /** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */
                        #define ADC_PRESCALE_2                  (1 << ADPS0)
 


@@ -159,10 +159,10 @@
 
                        /** Sets the ADC input clock to prescale by a factor of 128 the AVR's system clock. */
                        #define ADC_PRESCALE_128                ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))
 
                        /** Sets the ADC input clock to prescale by a factor of 128 the AVR's system clock. */
                        #define ADC_PRESCALE_128                ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))

-                       //@}
+                       /**@}*/

 
                        /** \name ADC MUX Masks */
 
                        /** \name ADC MUX Masks */

-                       //@{
+                       /**@{*/

                        /** MUX mask define for the ADC0 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
                        #define ADC_CHANNEL0                    (0x00 << MUX0)
 
                        /** MUX mask define for the ADC0 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
                        #define ADC_CHANNEL0                    (0x00 << MUX0)
 


@@ -251,7 +251,7 @@
                         *  \param[in] Channel  Index of the ADC channel whose MUX mask is to be retrieved.
                         */
                        #define ADC_GET_CHANNEL_MASK(Channel)   CONCAT_EXPANDED(ADC_CHANNEL, Channel)
                         *  \param[in] Channel  Index of the ADC channel whose MUX mask is to be retrieved.
                         */
                        #define ADC_GET_CHANNEL_MASK(Channel)   CONCAT_EXPANDED(ADC_CHANNEL, Channel)

-                       //@}
+                       /**@}*/

 
                /* Inline Functions: */
                        /** Configures the given ADC channel, ready for ADC conversions. This function sets the
 
                /* Inline Functions: */
                        /** Configures the given ADC channel, ready for ADC conversions. This function sets the

diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 005b266..750db0d 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -99,7 +99,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI Prescaler Configuration Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI Prescaler Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
                        #define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 
                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
                        #define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 


@@ -120,43 +120,43 @@
 
                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
                        #define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))
 
                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
                        #define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))

-                       //@}
+                       /**@}*/

 
                        /** \name SPI SCK Polarity Configuration Masks */
 
                        /** \name SPI SCK Polarity Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define SPI_SCK_LEAD_RISING            (0 << CPOL)
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
                        #define SPI_SCK_LEAD_FALLING           (1 << CPOL)
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define SPI_SCK_LEAD_RISING            (0 << CPOL)
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
                        #define SPI_SCK_LEAD_FALLING           (1 << CPOL)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Sample Edge Configuration Masks */
 
                        /** \name SPI Sample Edge Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define SPI_SAMPLE_LEADING             (0 << CPHA)
 
                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define SPI_SAMPLE_TRAILING            (1 << CPHA)
                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define SPI_SAMPLE_LEADING             (0 << CPHA)
 
                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define SPI_SAMPLE_TRAILING            (1 << CPHA)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Data Ordering Configuration Masks */
 
                        /** \name SPI Data Ordering Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define SPI_ORDER_MSB_FIRST            (0 << DORD)
 
                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define SPI_ORDER_LSB_FIRST            (1 << DORD)
                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define SPI_ORDER_MSB_FIRST            (0 << DORD)
 
                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define SPI_ORDER_LSB_FIRST            (1 << DORD)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Mode Configuration Masks */
 
                        /** \name SPI Mode Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
                        #define SPI_MODE_SLAVE                 (0 << MSTR)
 
                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
                        #define SPI_MODE_MASTER                (1 << MSTR)
                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
                        #define SPI_MODE_SLAVE                 (0 << MSTR)
 
                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
                        #define SPI_MODE_MASTER                (1 << MSTR)

-                       //@}
+                       /**@}*/

 
                /* Inline Functions: */
                        /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
 
                /* Inline Functions: */
                        /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other

diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
index d5b4b18..a6754a2 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
@@ -105,31 +105,31 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define USART_SPI_SCK_LEAD_RISING            (0 << UCPOL1)
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
                        #define USART_SPI_SCK_LEAD_FALLING           (1 << UCPOL1)
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define USART_SPI_SCK_LEAD_RISING            (0 << UCPOL1)
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
                        #define USART_SPI_SCK_LEAD_FALLING           (1 << UCPOL1)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Sample Edge Configuration Masks */
 
                        /** \name SPI Sample Edge Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define USART_SPI_SAMPLE_LEADING             (0 << UCPHA1)
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define USART_SPI_SAMPLE_TRAILING            (1 << UCPHA1)
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define USART_SPI_SAMPLE_LEADING             (0 << UCPHA1)
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define USART_SPI_SAMPLE_TRAILING            (1 << UCPHA1)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Data Ordering Configuration Masks */
 
                        /** \name SPI Data Ordering Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define USART_SPI_ORDER_MSB_FIRST            (0 << UDORD1)
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define USART_SPI_ORDER_LSB_FIRST            (1 << UDORD1)
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define USART_SPI_ORDER_MSB_FIRST            (0 << UDORD1)
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define USART_SPI_ORDER_LSB_FIRST            (1 << UDORD1)

-                       //@}
+                       /**@}*/

 
                /* Inline Functions: */
                        /** Initialize the USART module in Master SPI mode.
 
                /* Inline Functions: */
                        /** Initialize the USART module in Master SPI mode.

diff --git a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
index fffc0d1..96e5f76 100644 (file)
--- a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
@@ -96,7 +96,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI Prescaler Configuration Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI Prescaler Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
                        #define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 
                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
                        #define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 


@@ -117,43 +117,43 @@
 
                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
                        #define SPI_SPEED_FCPU_DIV_128         (3 << SPI_PRESCALER_gp)
 
                        /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
                        #define SPI_SPEED_FCPU_DIV_128         (3 << SPI_PRESCALER_gp)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI SCK Polarity Configuration Masks */
 
                        /** \name SPI SCK Polarity Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define SPI_SCK_LEAD_RISING            0
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
                        #define SPI_SCK_LEAD_FALLING           SPI_MODE1_bm
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define SPI_SCK_LEAD_RISING            0
 
                        /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
                        #define SPI_SCK_LEAD_FALLING           SPI_MODE1_bm

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Sample Edge Configuration Masks */
 
                        /** \name SPI Sample Edge Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define SPI_SAMPLE_LEADING             0
 
                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define SPI_SAMPLE_TRAILING            SPI_MODE0_bm
                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define SPI_SAMPLE_LEADING             0
 
                        /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define SPI_SAMPLE_TRAILING            SPI_MODE0_bm

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Data Ordering Configuration Masks */
 
                        /** \name SPI Data Ordering Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define SPI_ORDER_MSB_FIRST            0
 
                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define SPI_ORDER_LSB_FIRST            SPI_DORD_bm
                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define SPI_ORDER_MSB_FIRST            0
 
                        /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define SPI_ORDER_LSB_FIRST            SPI_DORD_bm

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Mode Configuration Masks */
 
                        /** \name SPI Mode Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
                        #define SPI_MODE_SLAVE                 0
 
                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
                        #define SPI_MODE_MASTER                SPI_MASTER_bm
                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
                        #define SPI_MODE_SLAVE                 0
 
                        /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
                        #define SPI_MODE_MASTER                SPI_MASTER_bm

-                       //@}
+                       /**@}*/

 
                /* Inline Functions: */
                        /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
 
                /* Inline Functions: */
                        /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other

diff --git a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
index 8d91baa..dff500e 100644 (file)
--- a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
@@ -97,28 +97,28 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI clock polarity mask for \ref SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define USART_SPI_SCK_LEAD_RISING      0
                        /** SPI clock polarity mask for \ref SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define USART_SPI_SCK_LEAD_RISING      0

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Sample Edge Configuration Masks */
 
                        /** \name SPI Sample Edge Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define USART_SPI_SAMPLE_LEADING       0
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define USART_SPI_SAMPLE_TRAILING      (1 << 1)
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define USART_SPI_SAMPLE_LEADING       0
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        #define USART_SPI_SAMPLE_TRAILING      (1 << 1)

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Data Ordering Configuration Masks */
 
                        /** \name SPI Data Ordering Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define USART_SPI_ORDER_MSB_FIRST      0
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define USART_SPI_ORDER_LSB_FIRST      (1 << 2)
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define USART_SPI_ORDER_MSB_FIRST      0
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
                        #define USART_SPI_ORDER_LSB_FIRST      (1 << 2)

-                       //@}
+                       /**@}*/

 
                /* Inline Functions: */
                        /** Initialize the USART module in Master SPI mode.
 
                /* Inline Functions: */
                        /** Initialize the USART module in Master SPI mode.

diff --git a/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h b/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h
index 4ab2018..b545dc4 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h
@@ -65,7 +65,7 @@
 
        /* Macros: */
                /** \name Audio Channel Masks */
 
        /* Macros: */
                /** \name Audio Channel Masks */

-               //@{
+               /**@{*/

                /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_CHANNEL_LEFT_FRONT           (1 << 0)
 
                /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_CHANNEL_LEFT_FRONT           (1 << 0)
 


@@ -101,10 +101,10 @@
 
                /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_CHANNEL_TOP                  (1 << 11)
 
                /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_CHANNEL_TOP                  (1 << 11)

-               //@}
+               /**@}*/

 
                /** \name Audio Feature Masks */
 
                /** \name Audio Feature Masks */

-               //@{
+               /**@{*/

                /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
                #define AUDIO_FEATURE_MUTE                 (1 << 0)
 
                /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
                #define AUDIO_FEATURE_MUTE                 (1 << 0)
 


@@ -134,10 +134,10 @@
 
                /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
                #define AUDIO_FEATURE_BASS_LOUDNESS        (1 << 9)
 
                /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
                #define AUDIO_FEATURE_BASS_LOUDNESS        (1 << 9)

-               //@}
+               /**@}*/

 
                /** \name Audio Terminal Types */
 
                /** \name Audio Terminal Types */

-               //@{
+               /**@{*/

                /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_TERMINAL_UNDEFINED           0x0100
 
                /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_TERMINAL_UNDEFINED           0x0100
 


@@ -191,7 +191,7 @@
 
                /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_TERMINAL_OUT_LOWFREQ         0x0307
 
                /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
                #define AUDIO_TERMINAL_OUT_LOWFREQ         0x0307

-               //@}
+               /**@}*/

 
                /** Convenience macro to fill a 24-bit \ref USB_Audio_SampleFreq_t structure with the given sample rate as a 24-bit number.
                 *
 
                /** Convenience macro to fill a 24-bit \ref USB_Audio_SampleFreq_t structure with the given sample rate as a 24-bit number.
                 *

diff --git a/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h b/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h
index c107a36..cf32611 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h
@@ -65,7 +65,7 @@
 
        /* Macros: */
                /** \name Virtual Control Line Masks */
 
        /* Macros: */
                /** \name Virtual Control Line Masks */

-               //@{
+               /**@{*/

                /** Mask for the DTR handshake line for use with the \ref CDC_REQ_SetControlLineState class-specific request
                 *  from the host, to indicate that the DTR line state should be high.
                 */
                /** Mask for the DTR handshake line for use with the \ref CDC_REQ_SetControlLineState class-specific request
                 *  from the host, to indicate that the DTR line state should be high.
                 */


@@ -110,7 +110,7 @@
                 *  to indicate that a data overrun error has occurred on the virtual serial port.
                 */
                #define CDC_CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
                 *  to indicate that a data overrun error has occurred on the virtual serial port.
                 */
                #define CDC_CONTROL_LINE_IN_OVERRUNERROR (1 << 6)

-               //@}
+               /**@}*/

 
        /* Enums: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the CDC
 
        /* Enums: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the CDC

diff --git a/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h b/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h
index c59e769..9f50ef1 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h
@@ -66,7 +66,7 @@
 
        /* Macros: */
                /** \name Keyboard Standard Report Modifier Masks */
 
        /* Macros: */
                /** \name Keyboard Standard Report Modifier Masks */

-               //@{
+               /**@{*/

                /** Constant for a keyboard report modifier byte, indicating that the keyboard's left control key is currently pressed. */
                #define HID_KEYBOARD_MODIFIER_LEFTCTRL                    (1 << 0)
 
                /** Constant for a keyboard report modifier byte, indicating that the keyboard's left control key is currently pressed. */
                #define HID_KEYBOARD_MODIFIER_LEFTCTRL                    (1 << 0)
 


@@ -90,10 +90,10 @@
 
                /** Constant for a keyboard report modifier byte, indicating that the keyboard's right GUI key is currently pressed. */
                #define HID_KEYBOARD_MODIFIER_RIGHTGUI                    (1 << 7)
 
                /** Constant for a keyboard report modifier byte, indicating that the keyboard's right GUI key is currently pressed. */
                #define HID_KEYBOARD_MODIFIER_RIGHTGUI                    (1 << 7)

-               //@}
+               /**@}*/

 
                /** \name Keyboard Standard Report LED Masks */
 
                /** \name Keyboard Standard Report LED Masks */

-               //@{
+               /**@{*/

                /** Constant for a keyboard output report LED byte, indicating that the host's NUM LOCK mode is currently set. */
                #define HID_KEYBOARD_LED_NUMLOCK                          (1 << 0)
 
                /** Constant for a keyboard output report LED byte, indicating that the host's NUM LOCK mode is currently set. */
                #define HID_KEYBOARD_LED_NUMLOCK                          (1 << 0)
 


@@ -108,10 +108,10 @@
 
                /** Constant for a keyboard output report LED byte, indicating that the host's KANA mode is currently set. */
                #define HID_KEYBOARD_LED_KANA                             (1 << 4)
 
                /** Constant for a keyboard output report LED byte, indicating that the host's KANA mode is currently set. */
                #define HID_KEYBOARD_LED_KANA                             (1 << 4)

-               //@}
+               /**@}*/

 
                /** \name Keyboard Standard Report Key Scan-codes */
 
                /** \name Keyboard Standard Report Key Scan-codes */

-               //@{
+               /**@{*/

                #define HID_KEYBOARD_SC_RESERVED                          0x00
                #define HID_KEYBOARD_SC_ERROR_ROLLOVER                    0x01
                #define HID_KEYBOARD_SC_POST_FAIL                         0x02
                #define HID_KEYBOARD_SC_RESERVED                          0x00
                #define HID_KEYBOARD_SC_ERROR_ROLLOVER                    0x01
                #define HID_KEYBOARD_SC_POST_FAIL                         0x02


@@ -348,10 +348,10 @@
                #define HID_KEYBOARD_SC_MEDIA_LOCK                        0xF9
                #define HID_KEYBOARD_SC_MEDIA_RELOAD                      0xFA
                #define HID_KEYBOARD_SC_MEDIA_CALCULATOR                  0xFB
                #define HID_KEYBOARD_SC_MEDIA_LOCK                        0xF9
                #define HID_KEYBOARD_SC_MEDIA_RELOAD                      0xFA
                #define HID_KEYBOARD_SC_MEDIA_CALCULATOR                  0xFB

-               //@}
+               /**@}*/

 
                /** \name Common HID Device Report Descriptors */
 
                /** \name Common HID Device Report Descriptors */

-               //@{
+               /**@{*/

                /** \hideinitializer
                 *  A list of HID report item array elements that describe a typical HID USB Joystick. The resulting report
                 *  descriptor is structured according to the following layout:
                /** \hideinitializer
                 *  A list of HID report item array elements that describe a typical HID USB Joystick. The resulting report
                 *  descriptor is structured according to the following layout:


@@ -537,7 +537,7 @@
                                HID_RI_REPORT_COUNT(8, NumBytes),       \
                                HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), \
                        HID_RI_END_COLLECTION(0)
                                HID_RI_REPORT_COUNT(8, NumBytes),       \
                                HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), \
                        HID_RI_END_COLLECTION(0)

-               //@}
+               /**@}*/

 
        /* Type Defines: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the HID
 
        /* Type Defines: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the HID

diff --git a/LUFA/Drivers/USB/Class/Common/HIDReportData.h b/LUFA/Drivers/USB/Class/Common/HIDReportData.h
index 979fc46..694a6d8 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/HIDReportData.h
+++ b/LUFA/Drivers/USB/Class/Common/HIDReportData.h
@@ -75,7 +75,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                /** \name HID Input, Output and Feature Report Descriptor Item Flags */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                /** \name HID Input, Output and Feature Report Descriptor Item Flags */

-               //@{
+               /**@{*/

                        #define HID_IOF_CONSTANT                        (1 << 0)
                        #define HID_IOF_DATA                            (0 << 0)
                        #define HID_IOF_VARIABLE                        (1 << 1)
                        #define HID_IOF_CONSTANT                        (1 << 0)
                        #define HID_IOF_DATA                            (0 << 0)
                        #define HID_IOF_VARIABLE                        (1 << 1)


@@ -94,10 +94,10 @@
                        #define HID_IOF_NON_VOLATILE                    (0 << 7)
                        #define HID_IOF_BUFFERED_BYTES                  (1 << 8)
                        #define HID_IOF_BITFIELD                        (0 << 8)
                        #define HID_IOF_NON_VOLATILE                    (0 << 7)
                        #define HID_IOF_BUFFERED_BYTES                  (1 << 8)
                        #define HID_IOF_BITFIELD                        (0 << 8)

-               //@}
+               /**@}*/

 
                /** \name HID Report Descriptor Item Macros */
 
                /** \name HID Report Descriptor Item Macros */

-               //@{
+               /**@{*/

                        #define HID_RI_INPUT(DataBits, ...)             _HID_RI_ENTRY(HID_RI_TYPE_MAIN  , 0x80, DataBits, __VA_ARGS__)
                        #define HID_RI_OUTPUT(DataBits, ...)            _HID_RI_ENTRY(HID_RI_TYPE_MAIN  , 0x90, DataBits, __VA_ARGS__)
                        #define HID_RI_COLLECTION(DataBits, ...)        _HID_RI_ENTRY(HID_RI_TYPE_MAIN  , 0xA0, DataBits, __VA_ARGS__)
                        #define HID_RI_INPUT(DataBits, ...)             _HID_RI_ENTRY(HID_RI_TYPE_MAIN  , 0x80, DataBits, __VA_ARGS__)
                        #define HID_RI_OUTPUT(DataBits, ...)            _HID_RI_ENTRY(HID_RI_TYPE_MAIN  , 0x90, DataBits, __VA_ARGS__)
                        #define HID_RI_COLLECTION(DataBits, ...)        _HID_RI_ENTRY(HID_RI_TYPE_MAIN  , 0xA0, DataBits, __VA_ARGS__)


@@ -118,7 +118,7 @@
                        #define HID_RI_USAGE(DataBits, ...)             _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x00, DataBits, __VA_ARGS__)
                        #define HID_RI_USAGE_MINIMUM(DataBits, ...)     _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x10, DataBits, __VA_ARGS__)
                        #define HID_RI_USAGE_MAXIMUM(DataBits, ...)     _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x20, DataBits, __VA_ARGS__)
                        #define HID_RI_USAGE(DataBits, ...)             _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x00, DataBits, __VA_ARGS__)
                        #define HID_RI_USAGE_MINIMUM(DataBits, ...)     _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x10, DataBits, __VA_ARGS__)
                        #define HID_RI_USAGE_MAXIMUM(DataBits, ...)     _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x20, DataBits, __VA_ARGS__)

-               //@}
+               /**@}*/

 
 /** @} */
 
 
 /** @} */
 

diff --git a/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h b/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h
index d4976c7..97687c1 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h
@@ -71,7 +71,7 @@
                /** \name MIDI Command Values
                 *  See http://www.midi.org/techspecs/midimessages.php for more information.
                 */
                /** \name MIDI Command Values
                 *  See http://www.midi.org/techspecs/midimessages.php for more information.
                 */

-               //@{
+               /**@{*/

                /** MIDI command for System Exclusive (SysEx) single event that has one byte of data total. */
                #define MIDI_COMMAND_SYSEX_1BYTE           MIDI_COMMAND_SYSEX_END_1BYTE
 
                /** MIDI command for System Exclusive (SysEx) single event that has one byte of data total. */
                #define MIDI_COMMAND_SYSEX_1BYTE           MIDI_COMMAND_SYSEX_END_1BYTE
 


@@ -113,7 +113,7 @@
 
                /** MIDI command for a pitch change event. */
                #define MIDI_COMMAND_PITCH_WHEEL_CHANGE    0xE0
 
                /** MIDI command for a pitch change event. */
                #define MIDI_COMMAND_PITCH_WHEEL_CHANGE    0xE0

-               //@}
+               /**@}*/

 
                /** Standard key press velocity value used for all note events. */
                #define MIDI_STANDARD_VELOCITY             64
 
                /** Standard key press velocity value used for all note events. */
                #define MIDI_STANDARD_VELOCITY             64

diff --git a/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h b/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h
index ddf2c9f..36c8ab5 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h
@@ -77,7 +77,7 @@
                #define MS_COMMAND_DIR_DATA_IN                         (1 << 7)
 
                /** \name SCSI Commands*/
                #define MS_COMMAND_DIR_DATA_IN                         (1 << 7)
 
                /** \name SCSI Commands*/

-               //@{
+               /**@{*/

                /** SCSI Command Code for an INQUIRY command. */
                #define SCSI_CMD_INQUIRY                               0x12
 
                /** SCSI Command Code for an INQUIRY command. */
                #define SCSI_CMD_INQUIRY                               0x12
 


@@ -119,10 +119,10 @@
 
                /** SCSI Command Code for a MODE SENSE (10) command. */
                #define SCSI_CMD_MODE_SENSE_10                         0x5A
 
                /** SCSI Command Code for a MODE SENSE (10) command. */
                #define SCSI_CMD_MODE_SENSE_10                         0x5A

-               //@}
+               /**@}*/

 
                /** \name SCSI Sense Key Values */
 
                /** \name SCSI Sense Key Values */

-               //@{
+               /**@{*/

                /** SCSI Sense Code to indicate no error has occurred. */
                #define SCSI_SENSE_KEY_GOOD                            0x00
 
                /** SCSI Sense Code to indicate no error has occurred. */
                #define SCSI_SENSE_KEY_GOOD                            0x00
 


@@ -166,10 +166,10 @@
 
                /** SCSI Sense Code to indicate that the source data did not match the data read from the medium. */
                #define SCSI_SENSE_KEY_MISCOMPARE                      0x0E
 
                /** SCSI Sense Code to indicate that the source data did not match the data read from the medium. */
                #define SCSI_SENSE_KEY_MISCOMPARE                      0x0E

-               //@}
+               /**@}*/

 
                /** \name SCSI Additional Sense Codes */
 
                /** \name SCSI Additional Sense Codes */

-               //@{
+               /**@{*/

                /** SCSI Additional Sense Code to indicate no additional sense information is available. */
                #define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION          0x00
 
                /** SCSI Additional Sense Code to indicate no additional sense information is available. */
                #define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION          0x00
 


@@ -198,10 +198,10 @@
 
                /** SCSI Additional Sense Code to indicate that no removable medium is inserted into the device. */
                #define SCSI_ASENSE_MEDIUM_NOT_PRESENT                 0x3A
 
                /** SCSI Additional Sense Code to indicate that no removable medium is inserted into the device. */
                #define SCSI_ASENSE_MEDIUM_NOT_PRESENT                 0x3A

-               //@}
+               /**@}*/

 
                /** \name SCSI Additional Sense Key Code Qualifiers */
 
                /** \name SCSI Additional Sense Key Code Qualifiers */

-               //@{
+               /**@{*/

                /** SCSI Additional Sense Qualifier Code to indicate no additional sense qualifier information is available. */
                #define SCSI_ASENSEQ_NO_QUALIFIER                      0x00
 
                /** SCSI Additional Sense Qualifier Code to indicate no additional sense qualifier information is available. */
                #define SCSI_ASENSEQ_NO_QUALIFIER                      0x00
 


@@ -215,7 +215,7 @@
 
                /** SCSI Additional Sense Qualifier Code to indicate that an operation is currently in progress. */
                #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS             0x07
 
                /** SCSI Additional Sense Qualifier Code to indicate that an operation is currently in progress. */
                #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS             0x07

-               //@}
+               /**@}*/

 
        /* Enums: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Mass
 
        /* Enums: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Mass

diff --git a/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h b/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h
index 6441299..b060270 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h
@@ -65,7 +65,7 @@
 
        /* Macros: */
                /** \name Virtual Printer Status Line Masks */
 
        /* Macros: */
                /** \name Virtual Printer Status Line Masks */

-               //@{
+               /**@{*/

                /** Port status mask for a printer device, indicating that an error has *not* occurred. */
                #define PRNT_PORTSTATUS_NOTERROR    (1 << 3)
 
                /** Port status mask for a printer device, indicating that an error has *not* occurred. */
                #define PRNT_PORTSTATUS_NOTERROR    (1 << 3)
 


@@ -74,7 +74,7 @@
 
                /** Port status mask for a printer device, indicating that the device is currently out of paper. */
                #define PRNT_PORTSTATUS_PAPEREMPTY  (1 << 5)
 
                /** Port status mask for a printer device, indicating that the device is currently out of paper. */
                #define PRNT_PORTSTATUS_PAPEREMPTY  (1 << 5)

-               //@}
+               /**@}*/

 
        /* Enums: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Printer
 
        /* Enums: */
                /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Printer

diff --git a/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h b/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h
index 7bc94b7..035f5df 100644 (file)
--- a/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h
+++ b/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h
@@ -78,7 +78,7 @@
                #define REMOTE_NDIS_VERSION_MINOR             0x00
 
                /** \name RNDIS Message Values */
                #define REMOTE_NDIS_VERSION_MINOR             0x00
 
                /** \name RNDIS Message Values */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_PACKET_MSG                0x00000001UL
                #define REMOTE_NDIS_INITIALIZE_MSG            0x00000002UL
                #define REMOTE_NDIS_HALT_MSG                  0x00000003UL
                #define REMOTE_NDIS_PACKET_MSG                0x00000001UL
                #define REMOTE_NDIS_INITIALIZE_MSG            0x00000002UL
                #define REMOTE_NDIS_HALT_MSG                  0x00000003UL


@@ -87,46 +87,46 @@
                #define REMOTE_NDIS_RESET_MSG                 0x00000006UL
                #define REMOTE_NDIS_INDICATE_STATUS_MSG       0x00000007UL
                #define REMOTE_NDIS_KEEPALIVE_MSG             0x00000008UL
                #define REMOTE_NDIS_RESET_MSG                 0x00000006UL
                #define REMOTE_NDIS_INDICATE_STATUS_MSG       0x00000007UL
                #define REMOTE_NDIS_KEEPALIVE_MSG             0x00000008UL

-               //@}
+               /**@}*/

 
                /** \name RNDIS Response Values */
 
                /** \name RNDIS Response Values */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_INITIALIZE_CMPLT          0x80000002UL
                #define REMOTE_NDIS_QUERY_CMPLT               0x80000004UL
                #define REMOTE_NDIS_SET_CMPLT                 0x80000005UL
                #define REMOTE_NDIS_RESET_CMPLT               0x80000006UL
                #define REMOTE_NDIS_KEEPALIVE_CMPLT           0x80000008UL
                #define REMOTE_NDIS_INITIALIZE_CMPLT          0x80000002UL
                #define REMOTE_NDIS_QUERY_CMPLT               0x80000004UL
                #define REMOTE_NDIS_SET_CMPLT                 0x80000005UL
                #define REMOTE_NDIS_RESET_CMPLT               0x80000006UL
                #define REMOTE_NDIS_KEEPALIVE_CMPLT           0x80000008UL

-               //@}
+               /**@}*/

 
                /** \name RNDIS Status Values */
 
                /** \name RNDIS Status Values */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_STATUS_SUCCESS            0x00000000UL
                #define REMOTE_NDIS_STATUS_FAILURE            0xC0000001UL
                #define REMOTE_NDIS_STATUS_INVALID_DATA       0xC0010015UL
                #define REMOTE_NDIS_STATUS_NOT_SUPPORTED      0xC00000BBUL
                #define REMOTE_NDIS_STATUS_MEDIA_CONNECT      0x4001000BUL
                #define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT   0x4001000CUL
                #define REMOTE_NDIS_STATUS_SUCCESS            0x00000000UL
                #define REMOTE_NDIS_STATUS_FAILURE            0xC0000001UL
                #define REMOTE_NDIS_STATUS_INVALID_DATA       0xC0010015UL
                #define REMOTE_NDIS_STATUS_NOT_SUPPORTED      0xC00000BBUL
                #define REMOTE_NDIS_STATUS_MEDIA_CONNECT      0x4001000BUL
                #define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT   0x4001000CUL

-               //@}
+               /**@}*/

 
                /** \name RNDIS Media States */
 
                /** \name RNDIS Media States */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_MEDIA_STATE_CONNECTED     0x00000000UL
                #define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED  0x00000001UL
                #define REMOTE_NDIS_MEDIA_STATE_CONNECTED     0x00000000UL
                #define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED  0x00000001UL

-               //@}
+               /**@}*/

 
                /** \name RNDIS Media Types */
 
                /** \name RNDIS Media Types */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_MEDIUM_802_3              0x00000000UL
                #define REMOTE_NDIS_MEDIUM_802_3              0x00000000UL

-               //@}
+               /**@}*/

 
                /** \name RNDIS Connection Types */
 
                /** \name RNDIS Connection Types */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_DF_CONNECTIONLESS         0x00000001UL
                #define REMOTE_NDIS_DF_CONNECTION_ORIENTED    0x00000002UL
                #define REMOTE_NDIS_DF_CONNECTIONLESS         0x00000001UL
                #define REMOTE_NDIS_DF_CONNECTION_ORIENTED    0x00000002UL

-               //@}
+               /**@}*/

 
                /** \name RNDIS Packet Types */
 
                /** \name RNDIS Packet Types */

-               //@{
+               /**@{*/

                #define REMOTE_NDIS_PACKET_DIRECTED           0x00000001UL
                #define REMOTE_NDIS_PACKET_MULTICAST          0x00000002UL
                #define REMOTE_NDIS_PACKET_ALL_MULTICAST      0x00000004UL
                #define REMOTE_NDIS_PACKET_DIRECTED           0x00000001UL
                #define REMOTE_NDIS_PACKET_MULTICAST          0x00000002UL
                #define REMOTE_NDIS_PACKET_ALL_MULTICAST      0x00000004UL


@@ -139,10 +139,10 @@
                #define REMOTE_NDIS_PACKET_ALL_FUNCTIONAL     0x00002000UL
                #define REMOTE_NDIS_PACKET_FUNCTIONAL         0x00004000UL
                #define REMOTE_NDIS_PACKET_MAC_FRAME          0x00008000UL
                #define REMOTE_NDIS_PACKET_ALL_FUNCTIONAL     0x00002000UL
                #define REMOTE_NDIS_PACKET_FUNCTIONAL         0x00004000UL
                #define REMOTE_NDIS_PACKET_MAC_FRAME          0x00008000UL

-               //@}
+               /**@}*/

 
                /** \name RNDIS OID Values */
 
                /** \name RNDIS OID Values */

-               //@{
+               /**@{*/

                #define OID_GEN_SUPPORTED_LIST                0x00010101UL
                #define OID_GEN_HARDWARE_STATUS               0x00010102UL
                #define OID_GEN_MEDIA_SUPPORTED               0x00010103UL
                #define OID_GEN_SUPPORTED_LIST                0x00010101UL
                #define OID_GEN_HARDWARE_STATUS               0x00010102UL
                #define OID_GEN_MEDIA_SUPPORTED               0x00010103UL


@@ -170,7 +170,7 @@
                #define OID_802_3_RCV_ERROR_ALIGNMENT         0x01020101UL
                #define OID_802_3_XMIT_ONE_COLLISION          0x01020102UL
                #define OID_802_3_XMIT_MORE_COLLISIONS        0x01020103UL
                #define OID_802_3_RCV_ERROR_ALIGNMENT         0x01020101UL
                #define OID_802_3_XMIT_ONE_COLLISION          0x01020102UL
                #define OID_802_3_XMIT_MORE_COLLISIONS        0x01020103UL

-               //@}
+               /**@}*/

 
                /** Maximum size in bytes of an Ethernet frame according to the Ethernet standard. */
                #define ETHERNET_FRAME_SIZE_MAX               1500
 
                /** Maximum size in bytes of an Ethernet frame according to the Ethernet standard. */
                #define ETHERNET_FRAME_SIZE_MAX               1500

diff --git a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
index 1641102..c1e95b3 100644 (file)
--- a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
@@ -80,7 +80,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Device Mode Option Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Device Mode Option Masks */

-                       //@{
+                       /**@{*/

                        #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
                                /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                                 *  USB interface should be initialized in low speed (1.5Mb/s) mode.
                        #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
                                /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                                 *  USB interface should be initialized in low speed (1.5Mb/s) mode.


@@ -98,7 +98,7 @@
                         *  USB interface should be initialized in full speed (12Mb/s) mode.
                         */
                        #define USB_DEVICE_OPT_FULLSPEED               (0 << 0)
                         *  USB interface should be initialized in full speed (12Mb/s) mode.
                         */
                        #define USB_DEVICE_OPT_FULLSPEED               (0 << 0)

-                       //@}
+                       /**@}*/

 
                        #if (!defined(NO_INTERNAL_SERIAL) && \
                             (defined(USB_SERIES_7_AVR) || defined(USB_SERIES_6_AVR) || \
 
                        #if (!defined(NO_INTERNAL_SERIAL) && \
                             (defined(USB_SERIES_7_AVR) || defined(USB_SERIES_6_AVR) || \

diff --git a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h
index 67748ab..be7e0c7 100644 (file)
--- a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h
@@ -67,7 +67,7 @@
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */

-                       //@{
+                       /**@{*/

 
                        /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
                         *  discarding fully read packets from the host as needed. The last packet is not automatically
 
                        /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
                         *  discarding fully read packets from the host as needed. The last packet is not automatically


@@ -175,10 +175,10 @@
                        uint8_t Endpoint_Null_Stream(uint16_t Length,
                                                     uint16_t* const BytesProcessed);
 
                        uint8_t Endpoint_Null_Stream(uint16_t Length,
                                                     uint16_t* const BytesProcessed);
 

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for RAM source/destination data */
 
                        /** \name Stream functions for RAM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
                         *  sending full packets to the host as needed. The last packet filled is not automatically sent;
 
                        /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
                         *  sending full packets to the host as needed. The last packet filled is not automatically sent;


@@ -425,10 +425,10 @@
                         */
                        uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
                                                                uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
                                                                uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for EEPROM source/destination data */
 
                        /** \name Stream functions for EEPROM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
                         *
 
                        /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
                         *


@@ -565,10 +565,10 @@
                         */
                        uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
                                                                 uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
                                                                 uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for PROGMEM source/destination data */
 
                        /** \name Stream functions for PROGMEM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
                         *
 
                        /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
                         *


@@ -645,7 +645,7 @@
                         */
                        uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
                                                                  uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
                                                                  uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)

diff --git a/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h
index 472ab78..6be3abd 100644 (file)
--- a/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h
@@ -67,7 +67,7 @@
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */

-                       //@{
+                       /**@{*/

 
                        /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
                         *  as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
 
                        /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
                         *  as needed. The last packet is not automatically discarded once the remaining bytes has been read; the


@@ -173,10 +173,10 @@
                        uint8_t Pipe_Null_Stream(uint16_t Length,
                                                 uint16_t* const BytesProcessed);
 
                        uint8_t Pipe_Null_Stream(uint16_t Length,
                                                 uint16_t* const BytesProcessed);
 

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for RAM source/destination data */
 
                        /** \name Stream functions for RAM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** Writes the given number of bytes to the pipe from the given buffer in little endian,
                         *  sending full packets to the device as needed. The last packet filled is not automatically sent;
 
                        /** Writes the given number of bytes to the pipe from the given buffer in little endian,
                         *  sending full packets to the device as needed. The last packet filled is not automatically sent;


@@ -339,10 +339,10 @@
                        uint8_t Pipe_Read_Stream_BE(void* const Buffer,
                                                    uint16_t Length,
                                                    uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
                        uint8_t Pipe_Read_Stream_BE(void* const Buffer,
                                                    uint16_t Length,
                                                    uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for EEPROM source/destination data */
 
                        /** \name Stream functions for EEPROM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
                         *
 
                        /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
                         *


@@ -395,10 +395,10 @@
                        uint8_t Pipe_Read_EStream_BE(void* const Buffer,
                                                     uint16_t Length,
                                                     uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
                        uint8_t Pipe_Read_EStream_BE(void* const Buffer,
                                                     uint16_t Length,
                                                     uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for PROGMEM source/destination data */
 
                        /** \name Stream functions for PROGMEM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
                         *
 
                        /** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
                         *


@@ -429,7 +429,7 @@
                        uint8_t Pipe_Write_PStream_BE(const void* const Buffer,
                                                      uint16_t Length,
                                                      uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
                        uint8_t Pipe_Write_PStream_BE(const void* const Buffer,
                                                      uint16_t Length,
                                                      uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)

diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
index a59fb9c..9178f17 100644 (file)
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
@@ -99,7 +99,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Pipe Error Flag Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Pipe Error Flag Masks */

-                       //@{
+                       /**@{*/

                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
                        #define PIPE_ERRORFLAG_OVERFLOW         (1 << 6)
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
                        #define PIPE_ERRORFLAG_OVERFLOW         (1 << 6)
 


@@ -120,10 +120,10 @@
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
                        #define PIPE_ERRORFLAG_DATATGL          (1 << 0)
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
                        #define PIPE_ERRORFLAG_DATATGL          (1 << 0)

-                       //@}
+                       /**@}*/

 
                        /** \name Pipe Token Masks */
 
                        /** \name Pipe Token Masks */

-                       //@{
+                       /**@{*/

                        /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes),
                         *  which will trigger a control request on the attached device when data is written to the pipe.
                         */
                        /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes),
                         *  which will trigger a control request on the attached device when data is written to the pipe.
                         */


@@ -138,7 +138,7 @@
                         *  indicating that the pipe data will flow from host to device.
                         */
                        #define PIPE_TOKEN_OUT                  (2 << PTOKEN0)
                         *  indicating that the pipe data will flow from host to device.
                         */
                        #define PIPE_TOKEN_OUT                  (2 << PTOKEN0)

-                       //@}
+                       /**@}*/

 
                        /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
                         *  in the device descriptor of the attached device.
 
                        /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
                         *  in the device descriptor of the attached device.

diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
index 807e6b8..0debaa7 100644 (file)
--- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h
@@ -117,7 +117,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Controller Option Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Controller Option Masks */

-                       //@{
+                       /**@{*/

                        /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
                         *  regulator should be disabled and the AVR's VCC level used for the data pads.
                         *
                        /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
                         *  regulator should be disabled and the AVR's VCC level used for the data pads.
                         *


@@ -152,7 +152,7 @@
                         *  that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
                         */
                        #define USB_OPT_AUTO_PLL                   (0 << 2)
                         *  that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
                         */
                        #define USB_OPT_AUTO_PLL                   (0 << 2)

-                       //@}
+                       /**@}*/

 
                        #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
                                /** Constant for the maximum software timeout period of the USB data stream transfer functions
 
                        #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
                                /** Constant for the maximum software timeout period of the USB data stream transfer functions

diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h
index 70e9794..6da9cf4 100644 (file)
--- a/LUFA/Drivers/USB/Core/StdDescriptors.h
+++ b/LUFA/Drivers/USB/Core/StdDescriptors.h
@@ -120,7 +120,7 @@
                        #define LANGUAGE_ID_ENG                   0x0409
 
                        /** \name USB Configuration Descriptor Attribute Masks */
                        #define LANGUAGE_ID_ENG                   0x0409
 
                        /** \name USB Configuration Descriptor Attribute Masks */

-                       //@{
+                       /**@{*/

                        /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be always
                         *  set on all USB devices for historical purposes.
                         */
                        /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be always
                         *  set on all USB devices for historical purposes.
                         */


@@ -145,10 +145,10 @@
                         *  see \ref USB_Device_RemoteWakeupEnabled().
                         */
                        #define USB_CONFIG_ATTR_REMOTEWAKEUP      0x20
                         *  see \ref USB_Device_RemoteWakeupEnabled().
                         */
                        #define USB_CONFIG_ATTR_REMOTEWAKEUP      0x20

-                       //@}
+                       /**@}*/

 
                        /** \name Endpoint Descriptor Attribute Masks */
 
                        /** \name Endpoint Descriptor Attribute Masks */

-                       //@{
+                       /**@{*/

                        /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
                         *  \c Attributes value to indicate that the specified endpoint is not synchronized.
                         *
                        /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
                         *  \c Attributes value to indicate that the specified endpoint is not synchronized.
                         *


@@ -176,10 +176,10 @@
                         *  \see The USB specification for more details on the possible Endpoint attributes.
                         */
                        #define ENDPOINT_ATTR_SYNC                (3 << 2)
                         *  \see The USB specification for more details on the possible Endpoint attributes.
                         */
                        #define ENDPOINT_ATTR_SYNC                (3 << 2)

-                       //@}
+                       /**@}*/

 
                        /** \name Endpoint Descriptor Usage Masks */
 
                        /** \name Endpoint Descriptor Usage Masks */

-                       //@{
+                       /**@{*/

                        /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
                         *  \c Attributes value to indicate that the specified endpoint is used for data transfers.
                         *
                        /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
                         *  \c Attributes value to indicate that the specified endpoint is used for data transfers.
                         *


@@ -200,7 +200,7 @@
                         *  \see The USB specification for more details on the possible Endpoint usage attributes.
                         */
                        #define ENDPOINT_USAGE_IMPLICIT_FEEDBACK  (2 << 4)
                         *  \see The USB specification for more details on the possible Endpoint usage attributes.
                         */
                        #define ENDPOINT_USAGE_IMPLICIT_FEEDBACK  (2 << 4)

-                       //@}
+                       /**@}*/

 
                /* Enums: */
                        /** Enum for the possible standard descriptor types, as given in each descriptor's header. */
 
                /* Enums: */
                        /** Enum for the possible standard descriptor types, as given in each descriptor's header. */

diff --git a/LUFA/Drivers/USB/Core/StdRequestType.h b/LUFA/Drivers/USB/Core/StdRequestType.h
index ead56f5..ce7f84f 100644 (file)
--- a/LUFA/Drivers/USB/Core/StdRequestType.h
+++ b/LUFA/Drivers/USB/Core/StdRequestType.h
@@ -88,7 +88,7 @@
                        #define CONTROL_REQTYPE_RECIPIENT  0x1F
 
                        /** \name Control Request Data Direction Masks */
                        #define CONTROL_REQTYPE_RECIPIENT  0x1F
 
                        /** \name Control Request Data Direction Masks */

-                       //@{
+                       /**@{*/

                        /** Request data direction mask, indicating that the request data will flow from host to device.
                         *
                         *  \see \ref CONTROL_REQTYPE_DIRECTION macro.
                        /** Request data direction mask, indicating that the request data will flow from host to device.
                         *
                         *  \see \ref CONTROL_REQTYPE_DIRECTION macro.


@@ -100,10 +100,10 @@
                         *  \see \ref CONTROL_REQTYPE_DIRECTION macro.
                         */
                        #define REQDIR_DEVICETOHOST        (1 << 7)
                         *  \see \ref CONTROL_REQTYPE_DIRECTION macro.
                         */
                        #define REQDIR_DEVICETOHOST        (1 << 7)

-                       //@}
+                       /**@}*/

 
                        /** \name Control Request Type Masks */
 
                        /** \name Control Request Type Masks */

-                       //@{
+                       /**@{*/

                        /** Request type mask, indicating that the request is a standard request.
                         *
                         *  \see \ref CONTROL_REQTYPE_TYPE macro.
                        /** Request type mask, indicating that the request is a standard request.
                         *
                         *  \see \ref CONTROL_REQTYPE_TYPE macro.


@@ -121,10 +121,10 @@
                         *  \see \ref CONTROL_REQTYPE_TYPE macro.
                         */
                        #define REQTYPE_VENDOR             (2 << 5)
                         *  \see \ref CONTROL_REQTYPE_TYPE macro.
                         */
                        #define REQTYPE_VENDOR             (2 << 5)

-                       //@}
+                       /**@}*/

 
                        /** \name Control Request Recipient Masks */
 
                        /** \name Control Request Recipient Masks */

-                       //@{
+                       /**@{*/

                        /** Request recipient mask, indicating that the request is to be issued to the device as a whole.
                         *
                         *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.
                        /** Request recipient mask, indicating that the request is to be issued to the device as a whole.
                         *
                         *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.


@@ -151,7 +151,7 @@
                         *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.
                         */
                        #define REQREC_OTHER               (3 << 0)
                         *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.
                         */
                        #define REQREC_OTHER               (3 << 0)

-                       //@}
+                       /**@}*/

 
                /* Type Defines: */
                        /** \brief Standard USB Control Request
 
                /* Type Defines: */
                        /** \brief Standard USB Control Request

diff --git a/LUFA/Drivers/USB/Core/UC3/Device_UC3.h b/LUFA/Drivers/USB/Core/UC3/Device_UC3.h
index 770cf10..c8d15b7 100644 (file)
--- a/LUFA/Drivers/USB/Core/UC3/Device_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Device_UC3.h
@@ -68,7 +68,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Device Mode Option Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Device Mode Option Masks */

-                       //@{
+                       /**@{*/

                        /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                         *  USB interface should be initialized in low speed (1.5Mb/s) mode.
                         *
                        /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                         *  USB interface should be initialized in low speed (1.5Mb/s) mode.
                         *


@@ -88,7 +88,7 @@
                                 */
                                #define USB_DEVICE_OPT_HIGHSPEED           (1 << 1)
                        #endif
                                 */
                                #define USB_DEVICE_OPT_HIGHSPEED           (1 << 1)
                        #endif

-                       //@}
+                       /**@}*/

 
                        #if (!defined(NO_INTERNAL_SERIAL) && \
                             (defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || \
 
                        #if (!defined(NO_INTERNAL_SERIAL) && \
                             (defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || \

diff --git a/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h b/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h
index bb8fc2b..5d021b7 100644 (file)
--- a/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h
@@ -67,7 +67,7 @@
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */

-                       //@{
+                       /**@{*/

 
                        /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
                         *  discarding fully read packets from the host as needed. The last packet is not automatically
 
                        /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
                         *  discarding fully read packets from the host as needed. The last packet is not automatically


@@ -175,10 +175,10 @@
                        uint8_t Endpoint_Null_Stream(uint16_t Length,
                                                     uint16_t* const BytesProcessed);
 
                        uint8_t Endpoint_Null_Stream(uint16_t Length,
                                                     uint16_t* const BytesProcessed);
 

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for RAM source/destination data */
 
                        /** \name Stream functions for RAM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
                         *  sending full packets to the host as needed. The last packet filled is not automatically sent;
 
                        /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
                         *  sending full packets to the host as needed. The last packet filled is not automatically sent;


@@ -425,7 +425,7 @@
                         */
                        uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
                                                                uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
                                                                uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)

diff --git a/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h b/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h
index 8af02e9..7d842b0 100644 (file)
--- a/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h
@@ -67,7 +67,7 @@
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */

-                       //@{
+                       /**@{*/

 
                        /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
                         *  as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
 
                        /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
                         *  as needed. The last packet is not automatically discarded once the remaining bytes has been read; the


@@ -173,10 +173,10 @@
                        uint8_t Pipe_Null_Stream(uint16_t Length,
                                                 uint16_t* const BytesProcessed);
 
                        uint8_t Pipe_Null_Stream(uint16_t Length,
                                                 uint16_t* const BytesProcessed);
 

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for RAM source/destination data */
 
                        /** \name Stream functions for RAM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** Writes the given number of bytes to the pipe from the given buffer in little endian,
                         *  sending full packets to the device as needed. The last packet filled is not automatically sent;
 
                        /** Writes the given number of bytes to the pipe from the given buffer in little endian,
                         *  sending full packets to the device as needed. The last packet filled is not automatically sent;


@@ -339,7 +339,7 @@
                        uint8_t Pipe_Read_Stream_BE(void* const Buffer,
                                                    uint16_t Length,
                                                    uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
                        uint8_t Pipe_Read_Stream_BE(void* const Buffer,
                                                    uint16_t Length,
                                                    uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)

diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
index 67b717d..699169b 100644 (file)
--- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h
@@ -109,7 +109,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Pipe Error Flag Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name Pipe Error Flag Masks */

-                       //@{
+                       /**@{*/

                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
                        #define PIPE_ERRORFLAG_OVERFLOW         (AVR32_USBB_UPSTA0_OVERFI_MASK << 8)
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
                        #define PIPE_ERRORFLAG_OVERFLOW         (AVR32_USBB_UPSTA0_OVERFI_MASK << 8)
 


@@ -127,10 +127,10 @@
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
                        #define PIPE_ERRORFLAG_DATATGL          AVR32_USBB_UPERR0_DATATGL_MASK
 
                        /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
                        #define PIPE_ERRORFLAG_DATATGL          AVR32_USBB_UPERR0_DATATGL_MASK

-                       //@}
+                       /**@}*/

 
                        /** \name Pipe Token Masks */
 
                        /** \name Pipe Token Masks */

-                       //@{
+                       /**@{*/

                        /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes),
                         *  which will trigger a control request on the attached device when data is written to the pipe.
                         */
                        /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes),
                         *  which will trigger a control request on the attached device when data is written to the pipe.
                         */


@@ -145,7 +145,7 @@
                         *  indicating that the pipe data will flow from host to device.
                         */
                        #define PIPE_TOKEN_OUT                  AVR32_USBB_UPCFG0_PTOKEN_OUT
                         *  indicating that the pipe data will flow from host to device.
                         */
                        #define PIPE_TOKEN_OUT                  AVR32_USBB_UPCFG0_PTOKEN_OUT

-                       //@}
+                       /**@}*/

 
                        /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
                         *  in the device descriptor of the attached device.
 
                        /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
                         *  in the device descriptor of the attached device.

diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
index 5b56dbb..6b56f6d 100644 (file)
--- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h
@@ -97,7 +97,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Controller Option Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Controller Option Masks */

-                       //@{
+                       /**@{*/

                        /** Selects one of the system's main clock oscillators as the input clock to the USB Generic Clock source
                         *  generation module. This indicates that an external oscillator should be used directly instead of an
                         *  internal PLL clock source.
                        /** Selects one of the system's main clock oscillators as the input clock to the USB Generic Clock source
                         *  generation module. This indicates that an external oscillator should be used directly instead of an
                         *  internal PLL clock source.


@@ -115,7 +115,7 @@
 
                        /** Selects PLL or External Oscillator 1 as the USB Generic Clock source module input clock. */
                        #define USB_OPT_GCLK_CHANNEL_1             (0 << 3)
 
                        /** Selects PLL or External Oscillator 1 as the USB Generic Clock source module input clock. */
                        #define USB_OPT_GCLK_CHANNEL_1             (0 << 3)

-                       //@}
+                       /**@}*/

 
                        #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
                                /** Constant for the maximum software timeout period of the USB data stream transfer functions
 
                        #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
                                /** Constant for the maximum software timeout period of the USB data stream transfer functions

diff --git a/LUFA/Drivers/USB/Core/USBController.h b/LUFA/Drivers/USB/Core/USBController.h
index 25fb37d..d8773a4 100644 (file)
--- a/LUFA/Drivers/USB/Core/USBController.h
+++ b/LUFA/Drivers/USB/Core/USBController.h
@@ -64,7 +64,7 @@
 
        /* Defines: */
                /** \name Endpoint Direction Masks */
 
        /* Defines: */
                /** \name Endpoint Direction Masks */

-               //@{
+               /**@{*/

                /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
                 *  direction for comparing with the \c ENDPOINT_DIR_* masks.
                 */
                /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
                 *  direction for comparing with the \c ENDPOINT_DIR_* masks.
                 */


@@ -79,10 +79,10 @@
                 *  the index of the address within a device to obtain the full endpoint address.
                 */
                #define ENDPOINT_DIR_IN                    0x80
                 *  the index of the address within a device to obtain the full endpoint address.
                 */
                #define ENDPOINT_DIR_IN                    0x80

-               //@}
+               /**@}*/

 
                /** \name Pipe Direction Masks */
 
                /** \name Pipe Direction Masks */

-               //@{
+               /**@{*/

                /** Pipe direction mask, for masking against pipe addresses to retrieve the pipe's
                 *  direction for comparing with the \c PIPE_DIR_* masks.
                 */
                /** Pipe direction mask, for masking against pipe addresses to retrieve the pipe's
                 *  direction for comparing with the \c PIPE_DIR_* masks.
                 */


@@ -97,10 +97,10 @@
                 *  the index of the address within a device to obtain the full endpoint address.
                 */
                #define PIPE_DIR_IN                        0x80
                 *  the index of the address within a device to obtain the full endpoint address.
                 */
                #define PIPE_DIR_IN                        0x80

-               //@}
+               /**@}*/

 
                /** \name Endpoint/Pipe Type Masks */
 
                /** \name Endpoint/Pipe Type Masks */

-               //@{
+               /**@{*/

                /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared
                 *  with the \c EP_TYPE_* masks to determine the exact type of the endpoint.
                 */
                /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared
                 *  with the \c EP_TYPE_* masks to determine the exact type of the endpoint.
                 */


@@ -129,7 +129,7 @@
                 *  \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
                 */
                #define EP_TYPE_INTERRUPT                  0x03
                 *  \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
                 */
                #define EP_TYPE_INTERRUPT                  0x03

-               //@}
+               /**@}*/

 
        /* Enums: */
                /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the
 
        /* Enums: */
                /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the

diff --git a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h
index c12c25d..909d758 100644 (file)
--- a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h
+++ b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h
@@ -80,7 +80,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Device Mode Option Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Device Mode Option Masks */

-                       //@{
+                       /**@{*/

                        /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                         *  USB interface should be initialized in low speed (1.5Mb/s) mode.
                         *
                        /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
                         *  USB interface should be initialized in low speed (1.5Mb/s) mode.
                         *


@@ -98,7 +98,7 @@
                                 */
                                #define USB_DEVICE_OPT_FULLSPEED   (0 << 0)
                        #endif
                                 */
                                #define USB_DEVICE_OPT_FULLSPEED   (0 << 0)
                        #endif

-                       //@}
+                       /**@}*/

 
                        #if (!defined(NO_INTERNAL_SERIAL) || defined(__DOXYGEN__))
                                /** String descriptor index for the device's unique serial number string descriptor within the device.
 
                        #if (!defined(NO_INTERNAL_SERIAL) || defined(__DOXYGEN__))
                                /** String descriptor index for the device's unique serial number string descriptor within the device.

diff --git a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h
index cff888d..a62e1ef 100644 (file)
--- a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h
+++ b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h
@@ -67,7 +67,7 @@
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */
        /* Public Interface - May be used in end-application: */
                /* Function Prototypes: */
                        /** \name Stream functions for null data */

-                       //@{
+                       /**@{*/

 
                        /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
                         *  discarding fully read packets from the host as needed. The last packet is not automatically
 
                        /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
                         *  discarding fully read packets from the host as needed. The last packet is not automatically


@@ -175,10 +175,10 @@
                        uint8_t Endpoint_Null_Stream(uint16_t Length,
                                                     uint16_t* const BytesProcessed);
 
                        uint8_t Endpoint_Null_Stream(uint16_t Length,
                                                     uint16_t* const BytesProcessed);
 

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for RAM source/destination data */
 
                        /** \name Stream functions for RAM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
                         *  sending full packets to the host as needed. The last packet filled is not automatically sent;
 
                        /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
                         *  sending full packets to the host as needed. The last packet filled is not automatically sent;


@@ -425,10 +425,10 @@
                         */
                        uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
                                                                uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
                                                                uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for EEPROM source/destination data */
 
                        /** \name Stream functions for EEPROM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
                         *
 
                        /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
                         *


@@ -565,10 +565,10 @@
                         */
                        uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
                                                                 uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
                                                                 uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
                        /** \name Stream functions for PROGMEM source/destination data */
 
                        /** \name Stream functions for PROGMEM source/destination data */

-                       //@{
+                       /**@{*/

 
                        /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
                         *
 
                        /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
                         *


@@ -645,7 +645,7 @@
                         */
                        uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
                                                                  uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
                         */
                        uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
                                                                  uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

-                       //@}
+                       /**@}*/

 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
 
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)

diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
index 0915e3f..c8bb101 100644 (file)
--- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
+++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h
@@ -108,7 +108,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Controller Option Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name USB Controller Option Masks */

-                       //@{
+                       /**@{*/

                        /** Sets the USB bus interrupt priority level to be low priority. The USB bus interrupt is used for Start of Frame events, bus suspend
                         *  and resume events, bus reset events and other events related to the management of the USB bus.
                         */
                        /** Sets the USB bus interrupt priority level to be low priority. The USB bus interrupt is used for Start of Frame events, bus suspend
                         *  and resume events, bus reset events and other events related to the management of the USB bus.
                         */


@@ -129,7 +129,7 @@
 
                        /** Sets the USB controller to source its clock from the internal PLL. */
                        #define USB_OPT_PLLCLKSRC                 (1 << 3)
 
                        /** Sets the USB controller to source its clock from the internal PLL. */
                        #define USB_OPT_PLLCLKSRC                 (1 << 3)

-                       //@}
+                       /**@}*/

 
                        #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
                                /** Constant for the maximum software timeout period of the USB data stream transfer functions
 
                        #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
                                /** Constant for the maximum software timeout period of the USB data stream transfer functions

diff --git a/LUFA/Version.h b/LUFA/Version.h
index 30b40cf..4018861 100644 (file)
--- a/LUFA/Version.h
+++ b/LUFA/Version.h
@@ -43,7 +43,7 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name LUFA Release Type Constants */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name LUFA Release Type Constants */

-                       //@{
+                       /**@{*/

                                /** Constant for \ref LUFA_VERSION_RELEASE_TYPE indicating a development release. */
                                #define LUFA_VERSION_RELEASE_TYPE_DEVELOPMENT   0
 
                                /** Constant for \ref LUFA_VERSION_RELEASE_TYPE indicating a development release. */
                                #define LUFA_VERSION_RELEASE_TYPE_DEVELOPMENT   0
 


@@ -52,7 +52,7 @@
 
                                /** Constant for \ref LUFA_VERSION_RELEASE_TYPE indicating a full official release. */
                                #define LUFA_VERSION_RELEASE_TYPE_FULL          2
 
                                /** Constant for \ref LUFA_VERSION_RELEASE_TYPE indicating a full official release. */
                                #define LUFA_VERSION_RELEASE_TYPE_FULL          2

-                       //@}
+                       /**@}*/

 
                        /** Indicates the version number of the library, as an integer. \note This value is only updates in non-development releases. */
                        #define LUFA_VERSION_INTEGER              0x170418
 
                        /** Indicates the version number of the library, as an integer. \note This value is only updates in non-development releases. */
                        #define LUFA_VERSION_INTEGER              0x170418