Fix mistakes in the XPROGTarget.c/.h files for TPI mode software USART clock rate...

[pub/USBasp.git] / Projects / Magstripe / makefile

diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index e9cea8d..2571ad3 100644 (file)
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -71,28 +71,21 @@ BOARD  = USER
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the 
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the 

-#     processor frequency. You can then use this symbol in your source code to 
+#     processor frequency in Hz. You can then use this symbol in your source code to 

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.

-#     Typical values are:
-#         F_CPU =  1000000
-#         F_CPU =  1843200
-#         F_CPU =  2000000
-#         F_CPU =  3686400
-#         F_CPU =  4000000
-#         F_CPU =  7372800
-#         F_CPU =  8000000
-#         F_CPU = 11059200
-#         F_CPU = 14745600
-#         F_CPU = 16000000
-#         F_CPU = 18432000
-#         F_CPU = 20000000
+#
+#     This will be an integer division of F_CLOCK below, as it is sourced by
+#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.

 F_CPU = 16000000
 
 
 # Input clock frequency.
 #     This will define a symbol, F_CLOCK, in all source code files equal to the 
 F_CPU = 16000000
 
 
 # Input clock frequency.
 #     This will define a symbol, F_CLOCK, in all source code files equal to the 

-#     input clock frequency (before any prescaling is performed). This value may
+#     input clock frequency (before any prescaling is performed) in Hz. This value may

 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'


@@ -101,7 +94,7 @@ F_CPU = 16000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_CLOCK = 16000000
+F_CLOCK = $(F_CPU)

 
 
 # Output format. (can be srec, ihex, binary)
 
 
 # Output format. (can be srec, ihex, binary)


@@ -123,10 +116,10 @@ LUFA_PATH = ../..
 
 
 # LUFA library compile-time options
 
 
 # LUFA library compile-time options

-LUFA_OPTS  = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
-LUFA_OPTS += -D USB_DEVICE_ONLY
+LUFA_OPTS  = -D USB_DEVICE_ONLY

 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8

-LUFA_OPTS += -D USE_SINGLE_DEVICE_CONFIGURATION
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS

 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 
 
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 
 


@@ -226,10 +219,10 @@ CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
 CFLAGS += -funsigned-char
 CFLAGS += -funsigned-bitfields
 CFLAGS += -O$(OPT)
 CFLAGS += -funsigned-char
 CFLAGS += -funsigned-bitfields

+CFLAGS += -fno-inline-small-functions

 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -ffunction-sections
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -ffunction-sections

-CFLAGS += -finline-limit=20

 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wundef
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wundef


@@ -258,6 +251,7 @@ CPPFLAGS += -fshort-enums
 CPPFLAGS += -fno-exceptions
 CPPFLAGS += -Wall
 CFLAGS += -Wundef
 CPPFLAGS += -fno-exceptions
 CPPFLAGS += -Wall
 CFLAGS += -Wundef

+#CPPFLAGS += -mshort-calls

 #CPPFLAGS += -fno-unit-at-a-time
 #CPPFLAGS += -Wstrict-prototypes
 #CPPFLAGS += -Wunreachable-code
 #CPPFLAGS += -fno-unit-at-a-time
 #CPPFLAGS += -Wstrict-prototypes
 #CPPFLAGS += -Wunreachable-code


@@ -334,7 +328,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--relax 

 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))


@@ -472,7 +466,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
 
 
 # Default target.

-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end

 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym


@@ -515,34 +509,39 @@ sizeafter:
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
        2>/dev/null; echo; fi
 
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
        2>/dev/null; echo; fi
 

-checkhooks: build
-       @echo
-       @echo ------- Unhooked LUFA Events -------
-       @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
-                  cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
-                          echo "(None)"
-       @echo ------------------------------------
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:
+       @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst

 
 

-checklibmode:
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
+       @echo
+       @echo Checking for invalid events...
+       @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
+                        grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
+       @sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
+       @if test -s InvalidEvents.tmp; then exit 1; fi
+       
+showliboptions:

        @echo
        @echo

-       @echo ----------- Library Mode -----------
-       @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
-                 | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
-                 || echo "No specific mode (both device and host mode allowable)."
-       @echo ------------------------------------
+       @echo ---- Compile Time Library Options ----
+       @for i in $(LUFA_OPTS:-D%=%); do \
+               echo $$i; \
+       done
+       @echo --------------------------------------

 
 

-checkboard:
+showtarget:

        @echo
        @echo

-       @echo ---------- Selected Board ----------
-       @echo Selected board model is $(BOARD).
-       @echo ------------------------------------
+       @echo --------- Target Information ---------
+       @echo AVR Model: $(MCU)
+       @echo Board:     $(BOARD)
+       @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+       @echo --------------------------------------

        
        

+

 # Display compiler version information.
 gccversion : 
        @$(CC) --version
 
 
 # Display compiler version information.
 gccversion : 
        @$(CC) --version
 
 

-

 # Program the device.  
 program: $(TARGET).hex $(TARGET).eep
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 # Program the device.  
 program: $(TARGET).hex $(TARGET).eep
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)


@@ -558,10 +557,11 @@ dfu: $(TARGET).hex
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep

-       copy $(TARGET).eep $(TARGET)eep.hex
+       $(COPY) $(TARGET).eep $(TARGET)eep.hex

        batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
        batchisp -hardware usb -device $(MCU) -operation start reset 0
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
        batchisp -hardware usb -device $(MCU) -operation start reset 0

+       $(REMOVE) $(TARGET)eep.hex

 
 dfu-ee: $(TARGET).hex $(TARGET).eep
        dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
        dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep


@@ -721,9 +721,9 @@ clean_list:
        $(REMOVE) $(SRC:.c=.s)
        $(REMOVE) $(SRC:.c=.d)
        $(REMOVE) $(SRC:.c=.i)
        $(REMOVE) $(SRC:.c=.s)
        $(REMOVE) $(SRC:.c=.d)
        $(REMOVE) $(SRC:.c=.i)

+       $(REMOVE) InvalidEvents.tmp

        $(REMOVEDIR) .dep
 
        $(REMOVEDIR) .dep
 

-

 doxygen:
        @echo Generating Project Documentation...
        @doxygen Doxygen.conf
 doxygen:
        @echo Generating Project Documentation...
        @doxygen Doxygen.conf


@@ -741,8 +741,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
 
 
 # Listing of phony targets.

-.PHONY : all checkhooks checklibmode checkboard   \
-begin finish end sizebefore sizeafter gccversion  \
-build elf hex eep lss sym coff extcoff clean      \
-clean_list clean_binary program debug gdb-config  \
-doxygen dfu flip flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions    \
+showtarget begin finish end sizebefore sizeafter  \
+gccversion build elf hex eep lss sym coff extcoff \
+program dfu flip flip-ee dfu-ee clean debug       \
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file