Remove unused makefile macro from the DFU bootloader.

[pub/USBasp.git] / LUFA / Drivers / USB / Core / Events.h

diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h
index 2fff440..f468b7e 100644 (file)
--- a/LUFA/Drivers/USB/Core/Events.h
+++ b/LUFA/Drivers/USB/Core/Events.h
@@ -183,17 +183,17 @@
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  two seconds) will prevent the device from enumerating correctly.
                         *
+                        *  \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
+                        *             if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
+                        *
                         *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *
-                        *  \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
-                        *        if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
-                        *
                         *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
                         */
                        void EVENT_USB_Device_Connect(void);
@@ -201,17 +201,17 @@
                        /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is
                         *  disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin.
                         *
+                        *  \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
+                        *             if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
+                        *
                         *  \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *
-                        *  \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
-                        *        if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
-                        *
                         *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
                         */
                        void EVENT_USB_Device_Disconnect(void);