X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/f1b6ddb7107fd9534cc6a8d6ab2d46f349d9cdb7..deb6fce7bc7c897242eccd02bf9da5e5191efb58:/LUFA/Drivers/USB/Core/Events.h

diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h
index 2fff44046..f468b7e65 100644
--- a/LUFA/Drivers/USB/Core/Events.h
+++ b/LUFA/Drivers/USB/Core/Events.h
@@ -183,17 +183,17 @@
 			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
 			 *  two seconds) will prevent the device from enumerating correctly.
 			 *
+			 *  \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
+			 *             if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
+			 *
 			 *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
 			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
 			 *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
 			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
 			 *        \n\n
 			 *
-			 *  \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
-			 *        if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
-			 *
 			 *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
 			 */
 			void EVENT_USB_Device_Connect(void);
@@ -201,17 +201,17 @@
 			/** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is
 			 *  disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin.
 			 *
+			 *  \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
+			 *             if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
+			 *
 			 *  \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
 			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
 			 *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
 			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
 			 *        \n\n
 			 *
-			 *  \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
-			 *        if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
-			 *
 			 *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
 			 */
 			void EVENT_USB_Device_Disconnect(void);