# make program = Download the hex file to the device, using avrdude.\r
# Please customize the avrdude settings below first!\r
#\r
-# make dfu = Download the hex file to the device, using dfu-programmer (must\r
-# have dfu-programmer installed).\r
-#\r
-# make flip = Download the hex file to the device, using Atmel FLIP (must\r
-# have Atmel FLIP installed).\r
-#\r
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
-# (must have dfu-programmer installed).\r
-#\r
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
-# (must have Atmel FLIP installed).\r
-#\r
# make doxygen = Generate DoxyGen documentation for the project (must have\r
# DoxyGen installed)\r
#\r
MCU = at90usb1287\r
\r
\r
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring\r
+# Target board (see library "Board Types" documentation, USER or blank for projects not requiring\r
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called \r
# "Board" inside the application directory.\r
BOARD = USBKEY\r
F_CPU = 8000000\r
\r
\r
+# Input clock frequency.\r
+# This will define a symbol, F_CLOCK, in all source code files equal to the \r
+# input clock frequency (before any prescaling is performed). This value may\r
+# differ from F_CPU if prescaling is used on the latter, and is required as the\r
+# raw input clock is fed directly to the PLL sections of the AVR for high speed\r
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
+# at the end, this will be done automatically to create a 32-bit value in your\r
+# source code.\r
+#\r
+# If no clock division is performed on the input clock inside the AVR (via the\r
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
+F_CLOCK = $(F_CPU)\r
+\r
+\r
+# Starting byte address of the bootloader\r
+BOOT_START = 0x1E000\r
+\r
+\r
# Output format. (can be srec, ihex, binary)\r
FORMAT = ihex\r
\r
OBJDIR = .\r
\r
\r
+# Path to the LUFA library\r
+LUFA_PATH = ../..\r
+\r
+\r
+# LUFA library compile-time options\r
+LUFA_OPTS = -D USB_DEVICE_ONLY\r
+LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES\r
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0\r
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
+LUFA_OPTS += -D USE_RAM_DESCRIPTORS\r
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
+LUFA_OPTS += -D NO_INTERNAL_SERIAL\r
+\r
+\r
# List C source files here. (C dependencies are automatically generated.)\r
-SRC = $(TARGET).c \\r
- Descriptors.c \\r
- ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \\r
- ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \\r
- ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \\r
- ../../LUFA/Drivers/USB/HighLevel/USBTask.c \\r
- ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \\r
- ../../LUFA/Drivers/USB/HighLevel/Events.c \\r
- ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \\r
- \r
+SRC = $(TARGET).c \\r
+ Descriptors.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \\r
+\r
+\r
# List C++ source files here. (C dependencies are automatically generated.)\r
CPPSRC = \r
\r
# Each directory must be seperated by a space.\r
# Use forward slashes for directory separators.\r
# For a directory that has spaces, enclose it in quotes.\r
-EXTRAINCDIRS = ../../\r
+EXTRAINCDIRS = $(LUFA_PATH)/\r
\r
\r
# Compiler flag to set the C Standard level.\r
CSTANDARD = -std=gnu99\r
\r
\r
-# Starting byte address of the bootloader\r
-BOOT_START = 0x1E000\r
-\r
-\r
# Place -D or -U options here for C sources\r
-CDEFS = -DF_CPU=$(F_CPU)UL -DBOARD=BOARD_$(BOARD) -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DSTATIC_ENDPOINT_CONFIGURATION\r
-CDEFS += -DUSB_DEVICE_ONLY -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
-CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DFIXED_CONTROL_ENDPOINT_SIZE=8 -DUSE_SINGLE_DEVICE_CONFIGURATION\r
+CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)\r
+CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL\r
\r
\r
# Place -D or -U options here for ASM sources\r
CFLAGS += -fpack-struct\r
CFLAGS += -fshort-enums\r
CFLAGS += -fno-inline-small-functions\r
-CFLAGS += -fno-reorder-blocks\r
-CFLAGS += -fno-reorder-blocks-and-partition\r
-CFLAGS += -fno-reorder-functions\r
-CFLAGS += -fno-toplevel-reorder\r
CFLAGS += -Wall\r
CFLAGS += -Wstrict-prototypes\r
CFLAGS += -Wundef\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end\r
+all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
2>/dev/null; echo; fi\r
\r
-checkhooks: build\r
+showeventhooks: build\r
@echo\r
- @echo ------- Unhooked LUFA Events -------\r
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \\r
+ @echo -------- Unhooked LUFA Events --------\r
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
echo "(None)"\r
- @echo ----- End Unhooked LUFA Events -----\r
- \r
-checklibmode:\r
+ @echo --------------------------------------\r
+\r
+showliboptions:\r
@echo\r
- @echo ----------- Library Mode -----------\r
- @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \\r
- | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \\r
- || echo "No specific mode (both device and host mode allowable)."\r
- @echo ------------------------------------\r
+ @echo ---- Compile Time Library Options ----\r
+ @for i in $(LUFA_OPTS:-D%=%); do \\r
+ echo $$i; \\r
+ done\r
+ @echo --------------------------------------\r
\r
+showtarget:\r
+ @echo\r
+ @echo --------- Target Information ---------\r
+ @echo AVR Model: $(MCU)\r
+ @echo Board: $(BOARD)\r
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
+ @echo --------------------------------------\r
+ \r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
-flip: $(TARGET).hex\r
- batchisp -hardware usb -device $(MCU) -operation erase f\r
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
-\r
-dfu: $(TARGET).hex\r
- dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
- dfu-programmer $(MCU) reset\r
-\r
-flip-ee: $(TARGET).hex $(TARGET).eep\r
- copy $(TARGET).eep $(TARGET)eep.hex\r
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
-\r
-dfu-ee: $(TARGET).hex $(TARGET).eep\r
- dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep\r
- dfu-programmer $(MCU) reset\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
\r
clean_binary:\r
$(REMOVE) $(TARGET).hex\r
-\r
+ \r
clean_list:\r
@echo $(MSG_CLEANING)\r
$(REMOVE) $(TARGET).eep\r
+ $(REMOVE) $(TARGET)eep.hex\r
$(REMOVE) $(TARGET).cof\r
$(REMOVE) $(TARGET).elf\r
$(REMOVE) $(TARGET).map\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
@echo Documentation Generation Complete.\r
- \r
+\r
clean_doxygen:\r
rm -rf Documentation\r
\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all checkhooks checklibmode begin \\r
-finish end sizebefore sizeafter gccversion \\r
-build elf hex eep lss sym coff extcoff \\r
-clean clean_list clean_binary program debug \\r
-gdb-config doxygen\r
+.PHONY : all showeventhooks showliboptions showtarget \\r
+begin finish end sizebefore sizeafter gccversion build \\r
+elf hex eep lss sym coff extcoff program clean debug \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file
projects / pub / USBasp.git / blobdiff