X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/c1a1b6eeecb375259968ef6d989833312047f2d8..fa8beef82d1340a69390d4b11ca785ee016789c5:/Bootloaders/CDC/makefile diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index 3fa8ad4ff..3c79cb649 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -32,18 +32,6 @@ # make program = Download the hex file to the device, using avrdude. # Please customize the avrdude settings below first! # -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # @@ -63,7 +51,7 @@ MCU = at90usb1287 -# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring +# Target board (see library "Board Types" documentation, USER or blank for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY @@ -90,6 +78,24 @@ BOARD = USBKEY F_CPU = 8000000 +# Input clock frequency. +# This will define a symbol, F_CLOCK, in all source code files equal to the +# input clock frequency (before any prescaling is performed). This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_CLOCK = $(F_CPU) + + +# Starting byte address of the bootloader +BOOT_START = 0x1E000 + + # Output format. (can be srec, ihex, binary) FORMAT = ihex @@ -104,17 +110,36 @@ TARGET = BootloaderCDC OBJDIR = . +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options +LUFA_OPTS = -D USB_DEVICE_ONLY +LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES +LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 +LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 +LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 +LUFA_OPTS += -D USE_RAM_DESCRIPTORS +LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS += -D NO_INTERNAL_SERIAL + + # List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - Descriptors.c \ - ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \ - ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \ - ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \ - ../../LUFA/Drivers/USB/HighLevel/USBTask.c \ - ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \ - ../../LUFA/Drivers/USB/HighLevel/Events.c \ - ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \ - +SRC = $(TARGET).c \ + Descriptors.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \ + + # List C++ source files here. (C dependencies are automatically generated.) CPPSRC = @@ -146,7 +171,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = ../../ +EXTRAINCDIRS = $(LUFA_PATH)/ # Compiler flag to set the C Standard level. @@ -157,14 +182,9 @@ EXTRAINCDIRS = ../../ CSTANDARD = -std=gnu99 -# Starting byte address of the bootloader -BOOT_START = 0x1E000 - - # Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -DBOARD=BOARD_$(BOARD) -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DSTATIC_ENDPOINT_CONFIGURATION -CDEFS += -DUSB_DEVICE_ONLY -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DFIXED_CONTROL_ENDPOINT_SIZE=8 -DUSE_SINGLE_DEVICE_CONFIGURATION +CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS) +CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL # Place -D or -U options here for ASM sources @@ -194,10 +214,6 @@ CFLAGS += -ffunction-sections CFLAGS += -fpack-struct CFLAGS += -fshort-enums CFLAGS += -fno-inline-small-functions -CFLAGS += -fno-reorder-blocks -CFLAGS += -fno-reorder-blocks-and-partition -CFLAGS += -fno-reorder-functions -CFLAGS += -fno-toplevel-reorder CFLAGS += -Wall CFLAGS += -Wstrict-prototypes CFLAGS += -Wundef @@ -442,7 +458,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) # Default target. -all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end +all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end # Change the build target to build a HEX file or a library. build: elf hex eep lss sym @@ -485,22 +501,30 @@ sizeafter: @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ 2>/dev/null; echo; fi -checkhooks: build +showeventhooks: build @echo - @echo ------- Unhooked LUFA Events ------- - @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \ + @echo -------- Unhooked LUFA Events -------- + @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \ cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ echo "(None)" - @echo ----- End Unhooked LUFA Events ----- - -checklibmode: + @echo -------------------------------------- + +showliboptions: @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- +showtarget: + @echo + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- + # Display compiler version information. gccversion : @$(CC) --version @@ -511,26 +535,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep - dfu-programmer $(MCU) reset # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set @@ -670,10 +674,11 @@ clean: begin clean_list clean_binary end clean_binary: $(REMOVE) $(TARGET).hex - + clean_list: @echo $(MSG_CLEANING) $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET)eep.hex $(REMOVE) $(TARGET).cof $(REMOVE) $(TARGET).elf $(REMOVE) $(TARGET).map @@ -691,7 +696,7 @@ doxygen: @echo Generating Project Documentation... @doxygen Doxygen.conf @echo Documentation Generation Complete. - + clean_doxygen: rm -rf Documentation @@ -704,8 +709,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. -.PHONY : all checkhooks checklibmode begin \ -finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff \ -clean clean_list clean_binary program debug \ -gdb-config doxygen +.PHONY : all showeventhooks showliboptions showtarget \ +begin finish end sizebefore sizeafter gccversion build \ +elf hex eep lss sym coff extcoff program clean debug \ +clean_list clean_binary gdb-config doxygen \ No newline at end of file