Oops - need to turn off USART via control register B before reconfiguring, fix orderi...

[pub/USBasp.git] / Projects / Benito / Benito.c

diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c
index 834554b..23786fb 100644 (file)
--- a/Projects/Benito/Benito.c
+++ b/Projects/Benito/Benito.c
@@ -236,17 +236,17 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
        }
        
        /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
        }
        
        /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */

-       UCSR1A = 0;

        UCSR1B = 0;
        UCSR1B = 0;

+       UCSR1A = 0;

        UCSR1C = 0;
 
        /* Set the new baud rate before configuring the USART */
        UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
        
        /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
        UCSR1C = 0;
 
        /* Set the new baud rate before configuring the USART */
        UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
        
        /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */

+       UCSR1C = ConfigMask;

        UCSR1A = (1 << U2X1);   
        UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
        UCSR1A = (1 << U2X1);   
        UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));

-       UCSR1C = ConfigMask;

 }
 
 /** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
 }
 
 /** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer