Added new VirtualSerialMassStorage Device Class Driver demo.
[pub/USBasp.git] / Demos / Device / ClassDriver / VirtualSerialMassStorage / VirtualSerialMassStorage.txt
1 /** \file
2 *
3 * This file contains special DoxyGen information for the generation of the main page and other special
4 * documentation pages. It is not a project source file.
5 */
6
7 /** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
8 *
9 * \section Sec_Compat Demo Compatibility:
10 *
11 * The following list indicates what microcontrollers are compatible with this demo.
12 *
13 * - Series 7 USB AVRs (AT90USBxxx7)
14 * - Series 6 USB AVRs (AT90USBxxx6)
15 * - Series 4 USB AVRs (ATMEGAxxU4)
16 * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
17 *
18 * \section Sec_Info USB Information:
19 *
20 * The following table gives a rundown of the USB utilization of this demo.
21 *
22 * <table>
23 * <tr>
24 * <td><b>USB Mode:</b></td>
25 * <td>Device</td>
26 * </tr>
27 * <tr>
28 * <td><b>USB Class:</b></td>
29 * <td>Communications Device Class (CDC) \n
30 * Mass Storage Device</td>
31 * </tr>
32 * <tr>
33 * <td><b>USB Subclass:</b></td>
34 * <td>Abstract Control Model (ACM) \n
35 * Bulk-Only Transport</td>
36 * </tr>
37 * <tr>
38 * <td><b>Relevant Standards:</b></td>
39 * <td>USBIF CDC Class Standard \n
40 * USBIF Mass Storage Standard \n
41 * USB Bulk-Only Transport Standard \n
42 * SCSI Primary Commands Specification \n
43 * SCSI Block Commands Specification</td>
44 * </tr>
45 * <tr>
46 * <td><b>Usable Speeds:</b></td>
47 * <td>Full Speed Mode</td>
48 * </tr>
49 * </table>
50 *
51 * \section Sec_Description Project Description:
52 *
53 * Combined Communications Device Class/Mass Storage demonstration application.
54 * This gives a simple reference application for implementing a combined
55 * CDC and Mass Storage device acting as a both a virtual serial port and a flash
56 * drive. Joystick actions are transmitted to the host as strings, and data can be
57 * written to or read from the exposed flash drive interface in the same manner as
58 * other USB flash drives. The device does not respond to serial data sent from the
59 * host.
60 *
61 * After running this demo for the first time on a new computer,
62 * you will need to supply the .INF file located in this demo
63 * project's directory as the device's driver when running under
64 * Windows. This will enable Windows to use its inbuilt CDC drivers,
65 * negating the need for custom drivers for the device. Other
66 * Operating Systems should automatically use their own inbuilt
67 * CDC-ACM drivers.
68 *
69 * \section Sec_Options Project Options
70 *
71 * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
72 *
73 * <table>
74 * <tr>
75 * <td><b>Define Name:</b></td>
76 * <td><b>Location:</b></td>
77 * <td><b>Description:</b></td>
78 * </tr>
79 * <tr>
80 * <td>TOTAL_LUNS</td>
81 * <td>MassStorage.h</td>
82 * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
83 * this can be set to any positive non-zero amount.</td>
84 * </tr>
85 * </table>
86 */
87