Bootloaders/CDC/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make doxygen = Generate DoxyGen documentation for the project (must have
  36 #                DoxyGen installed)
  37 #
  38 # make debug = Start either simulavr or avarice as specified for debugging,
  39 #              with avr-gdb or avr-insight as the front end for debugging.
  40 #
  41 # make filename.s = Just compile filename.c into the assembler code only.
  42 #
  43 # make filename.i = Create a preprocessed source file for use in submitting
  44 #                   bug reports to the GCC project.
  45 #
  46 # To rebuild project do "make clean" then "make all".
  47 #----------------------------------------------------------------------------
  48
  49
  50 # MCU name
  51 MCU = at90usb1287
  52
  53
  54 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  55 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  56 # "Board" inside the application directory.
  57 BOARD  = USBKEY
  58
  59
  60 # Processor frequency.
  61 #     This will define a symbol, F_CPU, in all source code files equal to the
  62 #     processor frequency in Hz. You can then use this symbol in your source code to
  63 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  64 #     automatically to create a 32-bit value in your source code.
  65 #
  66 #     This will be an integer division of F_CLOCK below, as it is sourced by
  67 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  68 #     does not *change* the processor frequency - it should merely be updated to
  69 #     reflect the processor speed set externally so that the code can use accurate
  70 #     software delays.
  71 F_CPU = 8000000
  72
  73
  74 # Input clock frequency.
  75 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  76 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  77 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  78 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  79 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  80 #     at the end, this will be done automatically to create a 32-bit value in your
  81 #     source code.
  82 #
  83 #     If no clock division is performed on the input clock inside the AVR (via the
  84 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  85 F_CLOCK = $(F_CPU)
  86
  87
  88 # Starting byte address of the bootloader, as a byte address. Note that the address given
  89 # in the AVRStudio fuse programming dialogue uses word addresses, which will have to be
  90 # doubled to obtain the starting byte address of the bootloader section.
  91 BOOT_START = 0x1E000
  92
  93
  94 # Output format. (can be srec, ihex, binary)
  95 FORMAT = ihex
  96
  97
  98 # Target file name (without extension).
  99 TARGET = BootloaderCDC
 100
 101
 102 # Object files directory
 103 #     To put object files in current directory, use a dot (.), do NOT make
 104 #     this an empty or blank macro!
 105 OBJDIR = .
 106
 107
 108 # Path to the LUFA library
 109 LUFA_PATH = ../..
 110
 111
 112 # LUFA library compile-time options
 113 LUFA_OPTS  = -D USB_DEVICE_ONLY
 114 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 115 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 116 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 117 LUFA_OPTS += -D USE_RAM_DESCRIPTORS
 118 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 119 LUFA_OPTS += -D NO_INTERNAL_SERIAL
 120 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 121 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 122
 123
 124 # List C source files here. (C dependencies are automatically generated.)
 125 SRC = $(TARGET).c                                                 \
 126           Descriptors.c                                               \
 127           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 128           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 129           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 130           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 131           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 132           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 133           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
 134           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 135           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 136           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 137
 138
 139 # List C++ source files here. (C dependencies are automatically generated.)
 140 CPPSRC =
 141
 142
 143 # List Assembler source files here.
 144 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 145 #     will not be considered source files but generated files (assembler
 146 #     output from the compiler), and will be deleted upon "make clean"!
 147 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 148 #     it will preserve the spelling of the filenames, and gcc itself does
 149 #     care about how the name is spelled on its command-line.
 150 ASRC =
 151
 152
 153 # Optimization level, can be [0, 1, 2, 3, s].
 154 #     0 = turn off optimization. s = optimize for size.
 155 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 156 OPT = s
 157
 158
 159 # Debugging format.
 160 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 161 #     AVR Studio 4.10 requires dwarf-2.
 162 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 163 DEBUG = dwarf-2
 164
 165
 166 # List any extra directories to look for include files here.
 167 #     Each directory must be seperated by a space.
 168 #     Use forward slashes for directory separators.
 169 #     For a directory that has spaces, enclose it in quotes.
 170 EXTRAINCDIRS = $(LUFA_PATH)/
 171
 172
 173 # Compiler flag to set the C Standard level.
 174 #     c89   = "ANSI" C
 175 #     gnu89 = c89 plus GCC extensions
 176 #     c99   = ISO C99 standard (not yet fully implemented)
 177 #     gnu99 = c99 plus GCC extensions
 178 CSTANDARD = -std=gnu99
 179
 180
 181 # Place -D or -U options here for C sources
 182 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 183 CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 184
 185
 186 # Place -D or -U options here for ASM sources
 187 ADEFS = -DF_CPU=$(F_CPU)
 188
 189
 190 # Place -D or -U options here for C++ sources
 191 CPPDEFS = -DF_CPU=$(F_CPU)UL
 192 #CPPDEFS += -D__STDC_LIMIT_MACROS
 193 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 194
 195
 196
 197 #---------------- Compiler Options C ----------------
 198 #  -g*:          generate debugging information
 199 #  -O*:          optimization level
 200 #  -f...:        tuning, see GCC manual and avr-libc documentation
 201 #  -Wall...:     warning level
 202 #  -Wa,...:      tell GCC to pass this to the assembler.
 203 #    -adhlns...: create assembler listing
 204 CFLAGS = -g$(DEBUG)
 205 CFLAGS += $(CDEFS)
 206 CFLAGS += -O$(OPT)
 207 CFLAGS += -funsigned-char
 208 CFLAGS += -funsigned-bitfields
 209 CFLAGS += -ffunction-sections
 210 CFLAGS += -fpack-struct
 211 CFLAGS += -fshort-enums
 212 CFLAGS += -fno-inline-small-functions
 213 CFLAGS += -Wall
 214 CFLAGS += -Wstrict-prototypes
 215 CFLAGS += -Wundef
 216 #CFLAGS += -fno-unit-at-a-time
 217 #CFLAGS += -Wunreachable-code
 218 #CFLAGS += -Wsign-compare
 219 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 220 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 221 CFLAGS += $(CSTANDARD)
 222
 223
 224 #---------------- Compiler Options C++ ----------------
 225 #  -g*:          generate debugging information
 226 #  -O*:          optimization level
 227 #  -f...:        tuning, see GCC manual and avr-libc documentation
 228 #  -Wall...:     warning level
 229 #  -Wa,...:      tell GCC to pass this to the assembler.
 230 #    -adhlns...: create assembler listing
 231 CPPFLAGS = -g$(DEBUG)
 232 CPPFLAGS += $(CPPDEFS)
 233 CPPFLAGS += -O$(OPT)
 234 CPPFLAGS += -funsigned-char
 235 CPPFLAGS += -funsigned-bitfields
 236 CPPFLAGS += -fpack-struct
 237 CPPFLAGS += -fshort-enums
 238 CPPFLAGS += -fno-exceptions
 239 CPPFLAGS += -Wall
 240 CFLAGS += -Wundef
 241 #CPPFLAGS += -mshort-calls
 242 #CPPFLAGS += -fno-unit-at-a-time
 243 #CPPFLAGS += -Wstrict-prototypes
 244 #CPPFLAGS += -Wunreachable-code
 245 #CPPFLAGS += -Wsign-compare
 246 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 247 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 248 #CPPFLAGS += $(CSTANDARD)
 249
 250
 251 #---------------- Assembler Options ----------------
 252 #  -Wa,...:   tell GCC to pass this to the assembler.
 253 #  -adhlns:   create listing
 254 #  -gstabs:   have the assembler create line number information; note that
 255 #             for use in COFF files, additional information about filenames
 256 #             and function names needs to be present in the assembler source
 257 #             files -- see avr-libc docs [FIXME: not yet described there]
 258 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 259 #       dump that will be displayed for a given single line of source input.
 260 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 261
 262
 263 #---------------- Library Options ----------------
 264 # Minimalistic printf version
 265 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 266
 267 # Floating point printf version (requires MATH_LIB = -lm below)
 268 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 269
 270 # If this is left blank, then it will use the Standard printf version.
 271 PRINTF_LIB =
 272 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 273 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 274
 275
 276 # Minimalistic scanf version
 277 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 278
 279 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 280 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 281
 282 # If this is left blank, then it will use the Standard scanf version.
 283 SCANF_LIB =
 284 #SCANF_LIB = $(SCANF_LIB_MIN)
 285 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 286
 287
 288 MATH_LIB = -lm
 289
 290
 291 # List any extra directories to look for libraries here.
 292 #     Each directory must be seperated by a space.
 293 #     Use forward slashes for directory separators.
 294 #     For a directory that has spaces, enclose it in quotes.
 295 EXTRALIBDIRS =
 296
 297
 298
 299 #---------------- External Memory Options ----------------
 300
 301 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 302 # used for variables (.data/.bss) and heap (malloc()).
 303 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 304
 305 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 306 # only used for heap (malloc()).
 307 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 308
 309 EXTMEMOPTS =
 310
 311
 312
 313 #---------------- Linker Options ----------------
 314 #  -Wl,...:     tell GCC to pass this to linker.
 315 #    -Map:      create map file
 316 #    --cref:    add cross reference to  map file
 317 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 318 LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
 319 LDFLAGS += -Wl,--relax
 320 LDFLAGS += -Wl,--gc-sections
 321 LDFLAGS += $(EXTMEMOPTS)
 322 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 323 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 324 #LDFLAGS += -T linker_script.x
 325
 326
 327
 328 #---------------- Programming Options (avrdude) ----------------
 329
 330 # Programming hardware: alf avr910 avrisp bascom bsd
 331 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 332 #
 333 # Type: avrdude -c ?
 334 # to get a full listing.
 335 #
 336 AVRDUDE_PROGRAMMER = jtagmkII
 337
 338 # com1 = serial port. Use lpt1 to connect to parallel port.
 339 AVRDUDE_PORT = usb
 340
 341 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 342 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 343
 344
 345 # Uncomment the following if you want avrdude's erase cycle counter.
 346 # Note that this counter needs to be initialized first using -Yn,
 347 # see avrdude manual.
 348 #AVRDUDE_ERASE_COUNTER = -y
 349
 350 # Uncomment the following if you do /not/ wish a verification to be
 351 # performed after programming the device.
 352 #AVRDUDE_NO_VERIFY = -V
 353
 354 # Increase verbosity level.  Please use this when submitting bug
 355 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 356 # to submit bug reports.
 357 #AVRDUDE_VERBOSE = -v -v
 358
 359 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 360 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 361 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 362 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 363
 364
 365
 366 #---------------- Debugging Options ----------------
 367
 368 # For simulavr only - target MCU frequency.
 369 DEBUG_MFREQ = $(F_CPU)
 370
 371 # Set the DEBUG_UI to either gdb or insight.
 372 # DEBUG_UI = gdb
 373 DEBUG_UI = insight
 374
 375 # Set the debugging back-end to either avarice, simulavr.
 376 DEBUG_BACKEND = avarice
 377 #DEBUG_BACKEND = simulavr
 378
 379 # GDB Init Filename.
 380 GDBINIT_FILE = __avr_gdbinit
 381
 382 # When using avarice settings for the JTAG
 383 JTAG_DEV = /dev/com1
 384
 385 # Debugging port used to communicate between GDB / avarice / simulavr.
 386 DEBUG_PORT = 4242
 387
 388 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 389 #     just set to localhost unless doing some sort of crazy debugging when
 390 #     avarice is running on a different computer.
 391 DEBUG_HOST = localhost
 392
 393
 394
 395 #============================================================================
 396
 397
 398 # Define programs and commands.
 399 SHELL = sh
 400 CC = avr-gcc
 401 OBJCOPY = avr-objcopy
 402 OBJDUMP = avr-objdump
 403 SIZE = avr-size
 404 AR = avr-ar rcs
 405 NM = avr-nm
 406 AVRDUDE = avrdude
 407 REMOVE = rm -f
 408 REMOVEDIR = rm -rf
 409 COPY = cp
 410 WINSHELL = cmd
 411
 412 # Define Messages
 413 # English
 414 MSG_ERRORS_NONE = Errors: none
 415 MSG_BEGIN = -------- begin --------
 416 MSG_END = --------  end  --------
 417 MSG_SIZE_BEFORE = Size before:
 418 MSG_SIZE_AFTER = Size after:
 419 MSG_COFF = Converting to AVR COFF:
 420 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 421 MSG_FLASH = Creating load file for Flash:
 422 MSG_EEPROM = Creating load file for EEPROM:
 423 MSG_EXTENDED_LISTING = Creating Extended Listing:
 424 MSG_SYMBOL_TABLE = Creating Symbol Table:
 425 MSG_LINKING = Linking:
 426 MSG_COMPILING = Compiling C:
 427 MSG_COMPILING_CPP = Compiling C++:
 428 MSG_ASSEMBLING = Assembling:
 429 MSG_CLEANING = Cleaning project:
 430 MSG_CREATING_LIBRARY = Creating library:
 431
 432
 433
 434
 435 # Define all object files.
 436 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 437
 438 # Define all listing files.
 439 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 440
 441
 442 # Compiler flags to generate dependency files.
 443 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 444
 445
 446 # Combine all necessary flags and optional flags.
 447 # Add target processor to flags.
 448 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 449 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 450 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 451
 452
 453
 454
 455
 456 # Default target.
 457 all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
 458
 459 # Change the build target to build a HEX file or a library.
 460 build: elf hex eep lss sym
 461 #build: lib
 462
 463
 464 elf: $(TARGET).elf
 465 hex: $(TARGET).hex
 466 eep: $(TARGET).eep
 467 lss: $(TARGET).lss
 468 sym: $(TARGET).sym
 469 LIBNAME=lib$(TARGET).a
 470 lib: $(LIBNAME)
 471
 472
 473
 474 # Eye candy.
 475 # AVR Studio 3.x does not check make's exit code but relies on
 476 # the following magic strings to be generated by the compile job.
 477 begin:
 478         @echo
 479         @echo $(MSG_BEGIN)
 480
 481 end:
 482         @echo $(MSG_END)
 483         @echo
 484
 485
 486 # Display size of file.
 487 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 488 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 489 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 490 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 491
 492 sizebefore:
 493         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 494         2>/dev/null; echo; fi
 495
 496 sizeafter:
 497         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 498         2>/dev/null; echo; fi
 499
 500 $(LUFA_PATH)/LUFA/LUFA_Events.lst:
 501         @$(MAKE) -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
 502
 503 checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
 504         @echo
 505         @echo Checking for invalid events...
 506         @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
 507                          grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
 508         @sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
 509         @if test -s InvalidEvents.tmp; then exit 1; fi
 510
 511 showliboptions:
 512         @echo
 513         @echo ---- Compile Time Library Options ----
 514         @for i in $(LUFA_OPTS:-D%=%); do \
 515                 echo $$i; \
 516         done
 517         @echo --------------------------------------
 518
 519 showtarget:
 520         @echo
 521         @echo --------- Target Information ---------
 522         @echo AVR Model: $(MCU)
 523         @echo Board:     $(BOARD)
 524         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 525         @echo --------------------------------------
 526
 527
 528 # Display compiler version information.
 529 gccversion :
 530         @$(CC) --version
 531
 532
 533 # Program the device.
 534 program: $(TARGET).hex $(TARGET).eep
 535         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 536
 537
 538 # Generate avr-gdb config/init file which does the following:
 539 #     define the reset signal, load the target file, connect to target, and set
 540 #     a breakpoint at main().
 541 gdb-config:
 542         @$(REMOVE) $(GDBINIT_FILE)
 543         @echo define reset >> $(GDBINIT_FILE)
 544         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 545         @echo end >> $(GDBINIT_FILE)
 546         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 547         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 548 ifeq ($(DEBUG_BACKEND),simulavr)
 549         @echo load  >> $(GDBINIT_FILE)
 550 endif
 551         @echo break main >> $(GDBINIT_FILE)
 552
 553 debug: gdb-config $(TARGET).elf
 554 ifeq ($(DEBUG_BACKEND), avarice)
 555         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 556         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 557         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 558         @$(WINSHELL) /c pause
 559
 560 else
 561         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 562         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 563 endif
 564         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 565
 566
 567
 568
 569 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 570 COFFCONVERT = $(OBJCOPY) --debugging
 571 COFFCONVERT += --change-section-address .data-0x800000
 572 COFFCONVERT += --change-section-address .bss-0x800000
 573 COFFCONVERT += --change-section-address .noinit-0x800000
 574 COFFCONVERT += --change-section-address .eeprom-0x810000
 575
 576
 577
 578 coff: $(TARGET).elf
 579         @echo
 580         @echo $(MSG_COFF) $(TARGET).cof
 581         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 582
 583
 584 extcoff: $(TARGET).elf
 585         @echo
 586         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 587         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 588
 589
 590
 591 # Create final output files (.hex, .eep) from ELF output file.
 592 %.hex: %.elf
 593         @echo
 594         @echo $(MSG_FLASH) $@
 595         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 596
 597 %.eep: %.elf
 598         @echo
 599         @echo $(MSG_EEPROM) $@
 600         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 601         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 602
 603 # Create extended listing file from ELF output file.
 604 %.lss: %.elf
 605         @echo
 606         @echo $(MSG_EXTENDED_LISTING) $@
 607         $(OBJDUMP) -h -z -S $< > $@
 608
 609 # Create a symbol table from ELF output file.
 610 %.sym: %.elf
 611         @echo
 612         @echo $(MSG_SYMBOL_TABLE) $@
 613         $(NM) -n $< > $@
 614
 615
 616
 617 # Create library from object files.
 618 .SECONDARY : $(TARGET).a
 619 .PRECIOUS : $(OBJ)
 620 %.a: $(OBJ)
 621         @echo
 622         @echo $(MSG_CREATING_LIBRARY) $@
 623         $(AR) $@ $(OBJ)
 624
 625
 626 # Link: create ELF output file from object files.
 627 .SECONDARY : $(TARGET).elf
 628 .PRECIOUS : $(OBJ)
 629 %.elf: $(OBJ)
 630         @echo
 631         @echo $(MSG_LINKING) $@
 632         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 633
 634
 635 # Compile: create object files from C source files.
 636 $(OBJDIR)/%.o : %.c
 637         @echo
 638         @echo $(MSG_COMPILING) $<
 639         $(CC) -c $(ALL_CFLAGS) $< -o $@
 640
 641
 642 # Compile: create object files from C++ source files.
 643 $(OBJDIR)/%.o : %.cpp
 644         @echo
 645         @echo $(MSG_COMPILING_CPP) $<
 646         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 647
 648
 649 # Compile: create assembler files from C source files.
 650 %.s : %.c
 651         $(CC) -S $(ALL_CFLAGS) $< -o $@
 652
 653
 654 # Compile: create assembler files from C++ source files.
 655 %.s : %.cpp
 656         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 657
 658
 659 # Assemble: create object files from assembler source files.
 660 $(OBJDIR)/%.o : %.S
 661         @echo
 662         @echo $(MSG_ASSEMBLING) $<
 663         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 664
 665
 666 # Create preprocessed source for use in sending a bug report.
 667 %.i : %.c
 668         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 669
 670
 671 # Target: clean project.
 672 clean: begin clean_list clean_binary end
 673
 674 clean_binary:
 675         $(REMOVE) $(TARGET).hex
 676
 677 clean_list:
 678         @echo $(MSG_CLEANING)
 679         $(REMOVE) $(TARGET).eep
 680         $(REMOVE) $(TARGET)eep.hex
 681         $(REMOVE) $(TARGET).cof
 682         $(REMOVE) $(TARGET).elf
 683         $(REMOVE) $(TARGET).map
 684         $(REMOVE) $(TARGET).sym
 685         $(REMOVE) $(TARGET).lss
 686         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 687         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 688         $(REMOVE) $(SRC:.c=.s)
 689         $(REMOVE) $(SRC:.c=.d)
 690         $(REMOVE) $(SRC:.c=.i)
 691         $(REMOVE) InvalidEvents.tmp
 692         $(REMOVEDIR) .dep
 693
 694 doxygen:
 695         @echo Generating Project Documentation...
 696         @doxygen Doxygen.conf
 697         @echo Documentation Generation Complete.
 698
 699 clean_doxygen:
 700         rm -rf Documentation
 701
 702 # Create object files directory
 703 $(shell mkdir $(OBJDIR) 2>/dev/null)
 704
 705
 706 # Include the dependency files.
 707 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 708
 709
 710 # Listing of phony targets.
 711 .PHONY : all checkinvalidevents showliboptions    \
 712 showtarget begin finish end sizebefore sizeafter  \
 713 gccversion build elf hex eep lss sym coff extcoff \
 714 program clean debug clean_list clean_binary       \
 715 gdb-config doxygen