Demos/Device/ClassDriver/AudioInput/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = AudioInput
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../../../..
 116
 117
 118 # LUFA library compile-time options and predefined tokens
 119 LUFA_OPTS  = -D USB_DEVICE_ONLY
 120 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 121 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 122 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 123 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 124
 125 LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
 126 LUFA_OPTS += -D USE_TEST_TONE
 127
 128
 129 # Create the LUFA source path variables by including the LUFA root makefile
 130 include $(LUFA_PATH)/LUFA/makefile
 131
 132
 133 # List C source files here. (C dependencies are automatically generated.)
 134 SRC = $(TARGET).c                                                 \
 135           Descriptors.c                                               \
 136           $(LUFA_SRC_USB)                                             \
 137           $(LUFA_SRC_USBCLASS)
 138
 139
 140 # List C++ source files here. (C dependencies are automatically generated.)
 141 CPPSRC =
 142
 143
 144 # List Assembler source files here.
 145 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 146 #     will not be considered source files but generated files (assembler
 147 #     output from the compiler), and will be deleted upon "make clean"!
 148 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 149 #     it will preserve the spelling of the filenames, and gcc itself does
 150 #     care about how the name is spelled on its command-line.
 151 ASRC =
 152
 153
 154 # Optimization level, can be [0, 1, 2, 3, s].
 155 #     0 = turn off optimization. s = optimize for size.
 156 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 157 OPT = s
 158
 159
 160 # Debugging format.
 161 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 162 #     AVR Studio 4.10 requires dwarf-2.
 163 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 164 DEBUG = dwarf-2
 165
 166
 167 # List any extra directories to look for include files here.
 168 #     Each directory must be seperated by a space.
 169 #     Use forward slashes for directory separators.
 170 #     For a directory that has spaces, enclose it in quotes.
 171 EXTRAINCDIRS = $(LUFA_PATH)/
 172
 173
 174 # Compiler flag to set the C Standard level.
 175 #     c89   = "ANSI" C
 176 #     gnu89 = c89 plus GCC extensions
 177 #     c99   = ISO C99 standard (not yet fully implemented)
 178 #     gnu99 = c99 plus GCC extensions
 179 CSTANDARD = -std=c99
 180
 181
 182 # Place -D or -U options here for C sources
 183 CDEFS  = -DF_CPU=$(F_CPU)UL
 184 CDEFS += -DF_CLOCK=$(F_CLOCK)UL
 185 CDEFS += -DBOARD=BOARD_$(BOARD)
 186 CDEFS += $(LUFA_OPTS)
 187
 188
 189 # Place -D or -U options here for ASM sources
 190 ADEFS  = -DF_CPU=$(F_CPU)
 191 ADEFS += -DF_CLOCK=$(F_CLOCK)UL
 192 ADEFS += -DBOARD=BOARD_$(BOARD)
 193 ADEFS += $(LUFA_OPTS)
 194
 195 # Place -D or -U options here for C++ sources
 196 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 197 CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
 198 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 199 CPPDEFS += $(LUFA_OPTS)
 200 #CPPDEFS += -D__STDC_LIMIT_MACROS
 201 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 202
 203
 204
 205 #---------------- Compiler Options C ----------------
 206 #  -g*:          generate debugging information
 207 #  -O*:          optimization level
 208 #  -f...:        tuning, see GCC manual and avr-libc documentation
 209 #  -Wall...:     warning level
 210 #  -Wa,...:      tell GCC to pass this to the assembler.
 211 #    -adhlns...: create assembler listing
 212 CFLAGS = -g$(DEBUG)
 213 CFLAGS += $(CDEFS)
 214 CFLAGS += -O$(OPT)
 215 CFLAGS += -funsigned-char
 216 CFLAGS += -funsigned-bitfields
 217 CFLAGS += -ffunction-sections
 218 CFLAGS += -fno-inline-small-functions
 219 CFLAGS += -fpack-struct
 220 CFLAGS += -fshort-enums
 221 CFLAGS += -fno-strict-aliasing
 222 CFLAGS += -Wall
 223 CFLAGS += -Wstrict-prototypes
 224 #CFLAGS += -mshort-calls
 225 #CFLAGS += -fno-unit-at-a-time
 226 #CFLAGS += -Wundef
 227 #CFLAGS += -Wunreachable-code
 228 #CFLAGS += -Wsign-compare
 229 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 230 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 231 CFLAGS += $(CSTANDARD)
 232
 233
 234 #---------------- Compiler Options C++ ----------------
 235 #  -g*:          generate debugging information
 236 #  -O*:          optimization level
 237 #  -f...:        tuning, see GCC manual and avr-libc documentation
 238 #  -Wall...:     warning level
 239 #  -Wa,...:      tell GCC to pass this to the assembler.
 240 #    -adhlns...: create assembler listing
 241 CPPFLAGS = -g$(DEBUG)
 242 CPPFLAGS += $(CPPDEFS)
 243 CPPFLAGS += -O$(OPT)
 244 CPPFLAGS += -funsigned-char
 245 CPPFLAGS += -funsigned-bitfields
 246 CPPFLAGS += -fpack-struct
 247 CPPFLAGS += -fshort-enums
 248 CPPFLAGS += -fno-exceptions
 249 CPPFLAGS += -Wall
 250 CPPFLAGS += -Wundef
 251 #CPPFLAGS += -mshort-calls
 252 #CPPFLAGS += -fno-unit-at-a-time
 253 #CPPFLAGS += -Wstrict-prototypes
 254 #CPPFLAGS += -Wunreachable-code
 255 #CPPFLAGS += -Wsign-compare
 256 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 257 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 258 #CPPFLAGS += $(CSTANDARD)
 259
 260
 261 #---------------- Assembler Options ----------------
 262 #  -Wa,...:   tell GCC to pass this to the assembler.
 263 #  -adhlns:   create listing
 264 #  -gstabs:   have the assembler create line number information; note that
 265 #             for use in COFF files, additional information about filenames
 266 #             and function names needs to be present in the assembler source
 267 #             files -- see avr-libc docs [FIXME: not yet described there]
 268 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 269 #       dump that will be displayed for a given single line of source input.
 270 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 271
 272
 273 #---------------- Library Options ----------------
 274 # Minimalistic printf version
 275 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 276
 277 # Floating point printf version (requires MATH_LIB = -lm below)
 278 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 279
 280 # If this is left blank, then it will use the Standard printf version.
 281 PRINTF_LIB =
 282 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 283 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 284
 285
 286 # Minimalistic scanf version
 287 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 288
 289 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 290 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 291
 292 # If this is left blank, then it will use the Standard scanf version.
 293 SCANF_LIB =
 294 #SCANF_LIB = $(SCANF_LIB_MIN)
 295 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 296
 297
 298 MATH_LIB = -lm
 299
 300
 301 # List any extra directories to look for libraries here.
 302 #     Each directory must be seperated by a space.
 303 #     Use forward slashes for directory separators.
 304 #     For a directory that has spaces, enclose it in quotes.
 305 EXTRALIBDIRS =
 306
 307
 308
 309 #---------------- External Memory Options ----------------
 310
 311 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 312 # used for variables (.data/.bss) and heap (malloc()).
 313 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 314
 315 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 316 # only used for heap (malloc()).
 317 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 318
 319 EXTMEMOPTS =
 320
 321
 322
 323 #---------------- Linker Options ----------------
 324 #  -Wl,...:     tell GCC to pass this to linker.
 325 #    -Map:      create map file
 326 #    --cref:    add cross reference to  map file
 327 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 328 LDFLAGS += -Wl,--relax
 329 LDFLAGS += -Wl,--gc-sections
 330 LDFLAGS += $(EXTMEMOPTS)
 331 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 332 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 333 #LDFLAGS += -T linker_script.x
 334
 335
 336
 337 #---------------- Programming Options (avrdude) ----------------
 338
 339 # Programming hardware
 340 # Type: avrdude -c ?
 341 # to get a full listing.
 342 #
 343 AVRDUDE_PROGRAMMER = jtagmkII
 344
 345 # com1 = serial port. Use lpt1 to connect to parallel port.
 346 AVRDUDE_PORT = usb
 347
 348 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 349 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 350
 351
 352 # Uncomment the following if you want avrdude's erase cycle counter.
 353 # Note that this counter needs to be initialized first using -Yn,
 354 # see avrdude manual.
 355 #AVRDUDE_ERASE_COUNTER = -y
 356
 357 # Uncomment the following if you do /not/ wish a verification to be
 358 # performed after programming the device.
 359 #AVRDUDE_NO_VERIFY = -V
 360
 361 # Increase verbosity level.  Please use this when submitting bug
 362 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 363 # to submit bug reports.
 364 #AVRDUDE_VERBOSE = -v -v
 365
 366 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 367 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 368 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 369 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 370
 371
 372
 373 #---------------- Debugging Options ----------------
 374
 375 # For simulavr only - target MCU frequency.
 376 DEBUG_MFREQ = $(F_CPU)
 377
 378 # Set the DEBUG_UI to either gdb or insight.
 379 # DEBUG_UI = gdb
 380 DEBUG_UI = insight
 381
 382 # Set the debugging back-end to either avarice, simulavr.
 383 DEBUG_BACKEND = avarice
 384 #DEBUG_BACKEND = simulavr
 385
 386 # GDB Init Filename.
 387 GDBINIT_FILE = __avr_gdbinit
 388
 389 # When using avarice settings for the JTAG
 390 JTAG_DEV = /dev/com1
 391
 392 # Debugging port used to communicate between GDB / avarice / simulavr.
 393 DEBUG_PORT = 4242
 394
 395 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 396 #     just set to localhost unless doing some sort of crazy debugging when
 397 #     avarice is running on a different computer.
 398 DEBUG_HOST = localhost
 399
 400
 401
 402 #============================================================================
 403
 404
 405 # Define programs and commands.
 406 SHELL = sh
 407 CC = avr-gcc
 408 OBJCOPY = avr-objcopy
 409 OBJDUMP = avr-objdump
 410 SIZE = avr-size
 411 AR = avr-ar rcs
 412 NM = avr-nm
 413 AVRDUDE = avrdude
 414 REMOVE = rm -f
 415 REMOVEDIR = rm -rf
 416 COPY = cp
 417 WINSHELL = cmd
 418
 419
 420 # Define Messages
 421 # English
 422 MSG_ERRORS_NONE = Errors: none
 423 MSG_BEGIN = -------- begin --------
 424 MSG_END = --------  end  --------
 425 MSG_SIZE_BEFORE = Size before:
 426 MSG_SIZE_AFTER = Size after:
 427 MSG_COFF = Converting to AVR COFF:
 428 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 429 MSG_FLASH = Creating load file for Flash:
 430 MSG_EEPROM = Creating load file for EEPROM:
 431 MSG_EXTENDED_LISTING = Creating Extended Listing:
 432 MSG_SYMBOL_TABLE = Creating Symbol Table:
 433 MSG_LINKING = Linking:
 434 MSG_COMPILING = Compiling C:
 435 MSG_COMPILING_CPP = Compiling C++:
 436 MSG_ASSEMBLING = Assembling:
 437 MSG_CLEANING = Cleaning project:
 438 MSG_CREATING_LIBRARY = Creating library:
 439
 440
 441
 442
 443 # Define all object files.
 444 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 445
 446 # Define all listing files.
 447 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 448
 449
 450 # Compiler flags to generate dependency files.
 451 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 452
 453
 454 # Combine all necessary flags and optional flags.
 455 # Add target processor to flags.
 456 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 457 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 458 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 459
 460
 461
 462
 463
 464 # Default target.
 465 all: begin gccversion sizebefore build sizeafter end
 466
 467 # Change the build target to build a HEX file or a library.
 468 build: elf hex eep lss sym
 469 #build: lib
 470
 471
 472 elf: $(TARGET).elf
 473 hex: $(TARGET).hex
 474 eep: $(TARGET).eep
 475 lss: $(TARGET).lss
 476 sym: $(TARGET).sym
 477 LIBNAME=lib$(TARGET).a
 478 lib: $(LIBNAME)
 479
 480
 481
 482 # Eye candy.
 483 # AVR Studio 3.x does not check make's exit code but relies on
 484 # the following magic strings to be generated by the compile job.
 485 begin:
 486         @echo
 487         @echo $(MSG_BEGIN)
 488
 489 end:
 490         @echo $(MSG_END)
 491         @echo
 492
 493
 494 # Display size of file.
 495 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 496 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 497 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 498 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 499
 500
 501 sizebefore:
 502         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 503         2>/dev/null; echo; fi
 504
 505 sizeafter:
 506         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 507         2>/dev/null; echo; fi
 508
 509
 510
 511 # Display compiler version information.
 512 gccversion :
 513         @$(CC) --version
 514
 515
 516 # Program the device.
 517 program: $(TARGET).hex $(TARGET).eep
 518         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 519
 520 flip: $(TARGET).hex
 521         batchisp -hardware usb -device $(MCU) -operation erase f
 522         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 523         batchisp -hardware usb -device $(MCU) -operation start reset 0
 524
 525 dfu: $(TARGET).hex
 526         dfu-programmer $(MCU) erase
 527         dfu-programmer $(MCU) flash $(TARGET).hex
 528         dfu-programmer $(MCU) reset
 529
 530 flip-ee: $(TARGET).hex $(TARGET).eep
 531         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 532         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 533         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 534         batchisp -hardware usb -device $(MCU) -operation start reset 0
 535         $(REMOVE) $(TARGET)eep.hex
 536
 537 dfu-ee: $(TARGET).hex $(TARGET).eep
 538         dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 539         dfu-programmer $(MCU) reset
 540
 541
 542 # Generate avr-gdb config/init file which does the following:
 543 #     define the reset signal, load the target file, connect to target, and set
 544 #     a breakpoint at main().
 545 gdb-config:
 546         @$(REMOVE) $(GDBINIT_FILE)
 547         @echo define reset >> $(GDBINIT_FILE)
 548         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 549         @echo end >> $(GDBINIT_FILE)
 550         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 551         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 552 ifeq ($(DEBUG_BACKEND),simulavr)
 553         @echo load  >> $(GDBINIT_FILE)
 554 endif
 555         @echo break main >> $(GDBINIT_FILE)
 556
 557 debug: gdb-config $(TARGET).elf
 558 ifeq ($(DEBUG_BACKEND), avarice)
 559         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 560         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 561         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 562         @$(WINSHELL) /c pause
 563
 564 else
 565         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 566         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 567 endif
 568         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 569
 570
 571
 572
 573 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 574 COFFCONVERT = $(OBJCOPY) --debugging
 575 COFFCONVERT += --change-section-address .data-0x800000
 576 COFFCONVERT += --change-section-address .bss-0x800000
 577 COFFCONVERT += --change-section-address .noinit-0x800000
 578 COFFCONVERT += --change-section-address .eeprom-0x810000
 579
 580
 581
 582 coff: $(TARGET).elf
 583         @echo
 584         @echo $(MSG_COFF) $(TARGET).cof
 585         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 586
 587
 588 extcoff: $(TARGET).elf
 589         @echo
 590         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 591         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 592
 593
 594
 595 # Create final output files (.hex, .eep) from ELF output file.
 596 %.hex: %.elf
 597         @echo
 598         @echo $(MSG_FLASH) $@
 599         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 600
 601 %.eep: %.elf
 602         @echo
 603         @echo $(MSG_EEPROM) $@
 604         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 605         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 606
 607 # Create extended listing file from ELF output file.
 608 %.lss: %.elf
 609         @echo
 610         @echo $(MSG_EXTENDED_LISTING) $@
 611         $(OBJDUMP) -h -S -z $< > $@
 612
 613 # Create a symbol table from ELF output file.
 614 %.sym: %.elf
 615         @echo
 616         @echo $(MSG_SYMBOL_TABLE) $@
 617         $(NM) -n $< > $@
 618
 619
 620
 621 # Create library from object files.
 622 .SECONDARY : $(TARGET).a
 623 .PRECIOUS : $(OBJ)
 624 %.a: $(OBJ)
 625         @echo
 626         @echo $(MSG_CREATING_LIBRARY) $@
 627         $(AR) $@ $(OBJ)
 628
 629
 630 # Link: create ELF output file from object files.
 631 .SECONDARY : $(TARGET).elf
 632 .PRECIOUS : $(OBJ)
 633 %.elf: $(OBJ)
 634         @echo
 635         @echo $(MSG_LINKING) $@
 636         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 637
 638
 639 # Compile: create object files from C source files.
 640 $(OBJDIR)/%.o : %.c
 641         @echo
 642         @echo $(MSG_COMPILING) $<
 643         $(CC) -c $(ALL_CFLAGS) $< -o $@
 644
 645
 646 # Compile: create object files from C++ source files.
 647 $(OBJDIR)/%.o : %.cpp
 648         @echo
 649         @echo $(MSG_COMPILING_CPP) $<
 650         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 651
 652
 653 # Compile: create assembler files from C source files.
 654 %.s : %.c
 655         $(CC) -S $(ALL_CFLAGS) $< -o $@
 656
 657
 658 # Compile: create assembler files from C++ source files.
 659 %.s : %.cpp
 660         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 661
 662
 663 # Assemble: create object files from assembler source files.
 664 $(OBJDIR)/%.o : %.S
 665         @echo
 666         @echo $(MSG_ASSEMBLING) $<
 667         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 668
 669
 670 # Create preprocessed source for use in sending a bug report.
 671 %.i : %.c
 672         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 673
 674
 675 # Target: clean project.
 676 clean: begin clean_list end
 677
 678 clean_list :
 679         @echo
 680         @echo $(MSG_CLEANING)
 681         $(REMOVE) $(TARGET).hex
 682         $(REMOVE) $(TARGET).eep
 683         $(REMOVE) $(TARGET).cof
 684         $(REMOVE) $(TARGET).elf
 685         $(REMOVE) $(TARGET).map
 686         $(REMOVE) $(TARGET).sym
 687         $(REMOVE) $(TARGET).lss
 688         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 689         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 690         $(REMOVE) $(SRC:.c=.s)
 691         $(REMOVE) $(SRC:.c=.d)
 692         $(REMOVE) $(SRC:.c=.i)
 693         $(REMOVEDIR) .dep
 694
 695 doxygen:
 696         @echo Generating Project Documentation...
 697         @doxygen Doxygen.conf
 698         @echo Documentation Generation Complete.
 699
 700 clean_doxygen:
 701         rm -rf Documentation
 702
 703 # Create object files directory
 704 $(shell mkdir $(OBJDIR) 2>/dev/null)
 705
 706
 707 # Include the dependency files.
 708 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 709
 710
 711 # Listing of phony targets.
 712 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 713 build elf hex eep lss sym coff extcoff doxygen clean          \
 714 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 715 debug gdb-config
 716