3  *  This file contains special DoxyGen information for the generation of the main page and other special
 
   4  *  documentation pages. It is not a project source file.
 
   7 /** \mainpage Mass Storage Host Demo
 
   9  *  \section Sec_Compat Demo Compatibility:
 
  11  *  The following list indicates what microcontrollers are compatible with this demo.
 
  13  *  - Series 7 USB AVRs (AT90USBxxx7)
 
  15  *  \section Sec_Info USB Information:
 
  17  *  The following table gives a rundown of the USB utilization of this demo.
 
  21  *    <td><b>USB Mode:</b></td>
 
  25  *    <td><b>USB Class:</b></td>
 
  26  *    <td>Mass Storage Device</td>
 
  29  *    <td><b>USB Subclass:</b></td>
 
  33  *    <td><b>Relevant Standards:</b></td>
 
  34  *    <td>USBIF Mass Storage Standard \n
 
  35  *        USB Bulk-Only Transport Standard \n
 
  36  *        SCSI Primary Commands Specification \n
 
  37  *        SCSI Block Commands Specification</td>
 
  40  *    <td><b>Usable Speeds:</b></td>
 
  41  *    <td>Full Speed Mode</td>
 
  45  *  \section Sec_Description Project Description:
 
  47  *  Mass Storage host demonstration application. This gives a simple reference
 
  48  *  application for implementing a USB Mass Storage host, for USB storage devices
 
  49  *  using the standard Mass Storage USB profile.
 
  51  *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped
 
  52  *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
 
  53  *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
 
  54  *  of the disk will be dumped to the serial port.
 
  56  *  \section Sec_Options Project Options
 
  58  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.