Projects/AVRISP-MKII/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb162
  64
  65
  66 # Target architecture (see library "Board Types" documentation).
  67 ARCH = AVR8
  68
  69
  70 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  71 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  72 # "Board" inside the application directory.
  73 BOARD = USBTINYMKII
  74
  75
  76 # Processor frequency.
  77 #     This will define a symbol, F_CPU, in all source code files equal to the
  78 #     processor frequency in Hz. You can then use this symbol in your source code to
  79 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  80 #     automatically to create a 32-bit value in your source code.
  81 #
  82 #     This will be an integer division of F_USB below, as it is sourced by
  83 #     F_USB after it has run through any CPU prescalers. Note that this value
  84 #     does not *change* the processor frequency - it should merely be updated to
  85 #     reflect the processor speed set externally so that the code can use accurate
  86 #     software delays.
  87 F_CPU = 16000000
  88
  89
  90 # Input clock frequency.
  91 #     This will define a symbol, F_USB, in all source code files equal to the
  92 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  93 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  94 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  95 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  96 #     at the end, this will be done automatically to create a 32-bit value in your
  97 #     source code.
  98 #
  99 #     If no clock division is performed on the input clock inside the AVR (via the
 100 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 101 F_USB = $(F_CPU)
 102
 103
 104 # Output format. (can be srec, ihex, binary)
 105 FORMAT = ihex
 106
 107
 108 # Target file name (without extension).
 109 TARGET = AVRISP-MKII
 110
 111
 112 # Object files directory
 113 #     To put object files in current directory, use a dot (.), do NOT make
 114 #     this an empty or blank macro!
 115 OBJDIR = .
 116
 117
 118 # Path to the LUFA library
 119 LUFA_PATH = ../..
 120
 121
 122 # LUFA library compile-time options and predefined tokens
 123 LUFA_OPTS  = -D USB_DEVICE_ONLY
 124 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 125 LUFA_OPTS += -D ORDERED_EP_CONFIG
 126 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
 127 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 128 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 129 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 130 LUFA_OPTS += -D NO_INTERNAL_SERIAL
 131 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 132 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 133
 134 LUFA_OPTS += -D AUX_LINE_PORT=PORTB
 135 LUFA_OPTS += -D AUX_LINE_PIN=PINB
 136 LUFA_OPTS += -D AUX_LINE_DDR=DDRB
 137 LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
 138 LUFA_OPTS += -D ENABLE_ISP_PROTOCOL
 139 LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL
 140 LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
 141 LUFA_OPTS += -D VTARGET_REF_VOLTS=5
 142 LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1
 143 #LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF
 144 #LUFA_OPTS += -D NO_VTARGET_DETECT
 145 #LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
 146 #LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE
 147
 148
 149 # Create the LUFA source path variables by including the LUFA root makefile
 150 include $(LUFA_PATH)/LUFA/makefile
 151
 152
 153 # List C source files here. (C dependencies are automatically generated.)
 154 SRC = $(TARGET).c                                                 \
 155           Descriptors.c                                               \
 156           Lib/V2Protocol.c                                            \
 157           Lib/V2ProtocolParams.c                                      \
 158           Lib/ISP/ISPProtocol.c                                       \
 159           Lib/ISP/ISPTarget.c                                         \
 160           Lib/XPROG/XPROGProtocol.c                                   \
 161           Lib/XPROG/XPROGTarget.c                                     \
 162           Lib/XPROG/XMEGANVM.c                                        \
 163           Lib/XPROG/TINYNVM.c                                         \
 164           $(LUFA_SRC_USB)
 165
 166
 167 # List C++ source files here. (C dependencies are automatically generated.)
 168 CPPSRC =
 169
 170
 171 # List Assembler source files here.
 172 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 173 #     will not be considered source files but generated files (assembler
 174 #     output from the compiler), and will be deleted upon "make clean"!
 175 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 176 #     it will preserve the spelling of the filenames, and gcc itself does
 177 #     care about how the name is spelled on its command-line.
 178 ASRC =
 179
 180
 181 # Optimization level, can be [0, 1, 2, 3, s].
 182 #     0 = turn off optimization. s = optimize for size.
 183 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 184 OPT = s
 185
 186
 187 # Debugging format.
 188 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 189 #     AVR Studio 4.10 requires dwarf-2.
 190 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 191 DEBUG = dwarf-2
 192
 193
 194 # List any extra directories to look for include files here.
 195 #     Each directory must be seperated by a space.
 196 #     Use forward slashes for directory separators.
 197 #     For a directory that has spaces, enclose it in quotes.
 198 EXTRAINCDIRS = $(LUFA_PATH)/
 199
 200
 201 # Compiler flag to set the C Standard level.
 202 #     c89   = "ANSI" C
 203 #     gnu89 = c89 plus GCC extensions
 204 #     c99   = ISO C99 standard (not yet fully implemented)
 205 #     gnu99 = c99 plus GCC extensions
 206 CSTANDARD = -std=c99
 207
 208
 209 # Place -D or -U options here for C sources
 210 CDEFS  = -DF_CPU=$(F_CPU)UL
 211 CDEFS += -DF_USB=$(F_USB)UL
 212 CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
 213 CDEFS += $(LUFA_OPTS)
 214
 215
 216 # Place -D or -U options here for ASM sources
 217 ADEFS  = -DF_CPU=$(F_CPU)
 218 ADEFS += -DF_USB=$(F_USB)UL
 219 ADEFS += -DBOARD=BOARD_$(BOARD)
 220 ADEFS += $(LUFA_OPTS)
 221
 222 # Place -D or -U options here for C++ sources
 223 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 224 CPPDEFS += -DF_USB=$(F_USB)UL
 225 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 226 CPPDEFS += $(LUFA_OPTS)
 227 #CPPDEFS += -D__STDC_LIMIT_MACROS
 228 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 229
 230
 231
 232 #---------------- Compiler Options C ----------------
 233 #  -g*:          generate debugging information
 234 #  -O*:          optimization level
 235 #  -f...:        tuning, see GCC manual and avr-libc documentation
 236 #  -Wall...:     warning level
 237 #  -Wa,...:      tell GCC to pass this to the assembler.
 238 #    -adhlns...: create assembler listing
 239 CFLAGS = -g$(DEBUG)
 240 CFLAGS += $(CDEFS)
 241 CFLAGS += -O$(OPT)
 242 CFLAGS += -funsigned-char
 243 CFLAGS += -funsigned-bitfields
 244 CFLAGS += -ffunction-sections
 245 CFLAGS += -fno-inline-small-functions
 246 CFLAGS += -fpack-struct
 247 CFLAGS += -fshort-enums
 248 CFLAGS += -fno-strict-aliasing
 249 CFLAGS += -fno-split-wide-types
 250 CFLAGS += -Wall
 251 CFLAGS += -Wstrict-prototypes
 252 #CFLAGS += -mshort-calls
 253 #CFLAGS += -fno-unit-at-a-time
 254 #CFLAGS += -Wundef
 255 #CFLAGS += -Wunreachable-code
 256 #CFLAGS += -Wsign-compare
 257 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 258 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 259 CFLAGS += $(CSTANDARD)
 260
 261
 262 #---------------- Compiler Options C++ ----------------
 263 #  -g*:          generate debugging information
 264 #  -O*:          optimization level
 265 #  -f...:        tuning, see GCC manual and avr-libc documentation
 266 #  -Wall...:     warning level
 267 #  -Wa,...:      tell GCC to pass this to the assembler.
 268 #    -adhlns...: create assembler listing
 269 CPPFLAGS = -g$(DEBUG)
 270 CPPFLAGS += $(CPPDEFS)
 271 CPPFLAGS += -O$(OPT)
 272 CPPFLAGS += -funsigned-char
 273 CPPFLAGS += -funsigned-bitfields
 274 CPPFLAGS += -fpack-struct
 275 CPPFLAGS += -fshort-enums
 276 CPPFLAGS += -fno-exceptions
 277 CPPFLAGS += -Wall
 278 CPPFLAGS += -Wundef
 279 #CPPFLAGS += -mshort-calls
 280 #CPPFLAGS += -fno-unit-at-a-time
 281 #CPPFLAGS += -Wstrict-prototypes
 282 #CPPFLAGS += -Wunreachable-code
 283 #CPPFLAGS += -Wsign-compare
 284 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 285 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 286 #CPPFLAGS += $(CSTANDARD)
 287
 288
 289 #---------------- Assembler Options ----------------
 290 #  -Wa,...:   tell GCC to pass this to the assembler.
 291 #  -adhlns:   create listing
 292 #  -gstabs:   have the assembler create line number information; note that
 293 #             for use in COFF files, additional information about filenames
 294 #             and function names needs to be present in the assembler source
 295 #             files -- see avr-libc docs [FIXME: not yet described there]
 296 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 297 #       dump that will be displayed for a given single line of source input.
 298 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 299
 300
 301 #---------------- Library Options ----------------
 302 # Minimalistic printf version
 303 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 304
 305 # Floating point printf version (requires MATH_LIB = -lm below)
 306 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 307
 308 # If this is left blank, then it will use the Standard printf version.
 309 PRINTF_LIB =
 310 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 311 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 312
 313
 314 # Minimalistic scanf version
 315 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 316
 317 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 318 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 319
 320 # If this is left blank, then it will use the Standard scanf version.
 321 SCANF_LIB =
 322 #SCANF_LIB = $(SCANF_LIB_MIN)
 323 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 324
 325
 326 MATH_LIB = -lm
 327
 328
 329 # List any extra directories to look for libraries here.
 330 #     Each directory must be seperated by a space.
 331 #     Use forward slashes for directory separators.
 332 #     For a directory that has spaces, enclose it in quotes.
 333 EXTRALIBDIRS =
 334
 335
 336
 337 #---------------- External Memory Options ----------------
 338
 339 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 340 # used for variables (.data/.bss) and heap (malloc()).
 341 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 342
 343 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 344 # only used for heap (malloc()).
 345 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 346
 347 EXTMEMOPTS =
 348
 349
 350
 351 #---------------- Linker Options ----------------
 352 #  -Wl,...:     tell GCC to pass this to linker.
 353 #    -Map:      create map file
 354 #    --cref:    add cross reference to  map file
 355 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 356 LDFLAGS += -Wl,--relax
 357 LDFLAGS += -Wl,--gc-sections
 358 LDFLAGS += $(EXTMEMOPTS)
 359 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 360 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 361 #LDFLAGS += -T linker_script.x
 362
 363
 364
 365 #---------------- Programming Options (avrdude) ----------------
 366
 367 # Programming hardware
 368 # Type: avrdude -c ?
 369 # to get a full listing.
 370 #
 371 AVRDUDE_PROGRAMMER = jtagmkII
 372
 373 # com1 = serial port. Use lpt1 to connect to parallel port.
 374 AVRDUDE_PORT = usb
 375
 376 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 377 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 378
 379
 380 # Uncomment the following if you want avrdude's erase cycle counter.
 381 # Note that this counter needs to be initialized first using -Yn,
 382 # see avrdude manual.
 383 #AVRDUDE_ERASE_COUNTER = -y
 384
 385 # Uncomment the following if you do /not/ wish a verification to be
 386 # performed after programming the device.
 387 #AVRDUDE_NO_VERIFY = -V
 388
 389 # Increase verbosity level.  Please use this when submitting bug
 390 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 391 # to submit bug reports.
 392 #AVRDUDE_VERBOSE = -v -v
 393
 394 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 395 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 396 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 397 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 398
 399
 400
 401 #---------------- Debugging Options ----------------
 402
 403 # For simulavr only - target MCU frequency.
 404 DEBUG_MFREQ = $(F_CPU)
 405
 406 # Set the DEBUG_UI to either gdb or insight.
 407 # DEBUG_UI = gdb
 408 DEBUG_UI = insight
 409
 410 # Set the debugging back-end to either avarice, simulavr.
 411 DEBUG_BACKEND = avarice
 412 #DEBUG_BACKEND = simulavr
 413
 414 # GDB Init Filename.
 415 GDBINIT_FILE = __avr_gdbinit
 416
 417 # When using avarice settings for the JTAG
 418 JTAG_DEV = /dev/com1
 419
 420 # Debugging port used to communicate between GDB / avarice / simulavr.
 421 DEBUG_PORT = 4242
 422
 423 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 424 #     just set to localhost unless doing some sort of crazy debugging when
 425 #     avarice is running on a different computer.
 426 DEBUG_HOST = localhost
 427
 428
 429
 430 #============================================================================
 431
 432
 433 # Define programs and commands.
 434 SHELL = sh
 435 CC = avr-gcc
 436 OBJCOPY = avr-objcopy
 437 OBJDUMP = avr-objdump
 438 SIZE = avr-size
 439 AR = avr-ar rcs
 440 NM = avr-nm
 441 AVRDUDE = avrdude
 442 REMOVE = rm -f
 443 REMOVEDIR = rm -rf
 444 COPY = cp
 445 WINSHELL = cmd
 446
 447
 448 # Define Messages
 449 # English
 450 MSG_ERRORS_NONE = Errors: none
 451 MSG_BEGIN = -------- begin --------
 452 MSG_END = --------  end  --------
 453 MSG_SIZE_BEFORE = Size before:
 454 MSG_SIZE_AFTER = Size after:
 455 MSG_COFF = Converting to AVR COFF:
 456 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 457 MSG_FLASH = Creating load file for Flash:
 458 MSG_EEPROM = Creating load file for EEPROM:
 459 MSG_EXTENDED_LISTING = Creating Extended Listing:
 460 MSG_SYMBOL_TABLE = Creating Symbol Table:
 461 MSG_LINKING = Linking:
 462 MSG_COMPILING = Compiling C:
 463 MSG_COMPILING_CPP = Compiling C++:
 464 MSG_ASSEMBLING = Assembling:
 465 MSG_CLEANING = Cleaning project:
 466 MSG_CREATING_LIBRARY = Creating library:
 467
 468
 469
 470
 471 # Define all object files.
 472 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 473
 474 # Define all listing files.
 475 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 476
 477
 478 # Compiler flags to generate dependency files.
 479 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 480
 481
 482 # Combine all necessary flags and optional flags.
 483 # Add target processor to flags.
 484 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 485 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 486 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 487
 488
 489
 490
 491
 492 # Default target.
 493 all: begin gccversion sizebefore build sizeafter end
 494
 495 # Change the build target to build a HEX file or a library.
 496 build: elf hex eep lss sym
 497 #build: lib
 498
 499
 500 elf: $(TARGET).elf
 501 hex: $(TARGET).hex
 502 eep: $(TARGET).eep
 503 lss: $(TARGET).lss
 504 sym: $(TARGET).sym
 505 LIBNAME=lib$(TARGET).a
 506 lib: $(LIBNAME)
 507
 508
 509
 510 # Eye candy.
 511 # AVR Studio 3.x does not check make's exit code but relies on
 512 # the following magic strings to be generated by the compile job.
 513 begin:
 514         @echo
 515         @echo $(MSG_BEGIN)
 516
 517 end:
 518         @echo $(MSG_END)
 519         @echo
 520
 521
 522 # Display size of file.
 523 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 524 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 525 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 526 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 527
 528
 529 sizebefore:
 530         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 531         2>/dev/null; echo; fi
 532
 533 sizeafter:
 534         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 535         2>/dev/null; echo; fi
 536
 537
 538
 539 # Display compiler version information.
 540 gccversion :
 541         @$(CC) --version
 542
 543
 544 # Program the device.
 545 program: $(TARGET).hex $(TARGET).eep
 546         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 547
 548 flip: $(TARGET).hex
 549         batchisp -hardware usb -device $(MCU) -operation erase f
 550         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 551         batchisp -hardware usb -device $(MCU) -operation start reset 0
 552
 553 dfu: $(TARGET).hex
 554         dfu-programmer $(MCU) erase
 555         dfu-programmer $(MCU) flash $(TARGET).hex
 556         dfu-programmer $(MCU) reset
 557
 558 flip-ee: $(TARGET).hex $(TARGET).eep
 559         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 560         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 561         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 562         batchisp -hardware usb -device $(MCU) -operation start reset 0
 563         $(REMOVE) $(TARGET)eep.hex
 564
 565 dfu-ee: $(TARGET).hex $(TARGET).eep
 566         dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 567         dfu-programmer $(MCU) reset
 568
 569
 570 # Generate avr-gdb config/init file which does the following:
 571 #     define the reset signal, load the target file, connect to target, and set
 572 #     a breakpoint at main().
 573 gdb-config:
 574         @$(REMOVE) $(GDBINIT_FILE)
 575         @echo define reset >> $(GDBINIT_FILE)
 576         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 577         @echo end >> $(GDBINIT_FILE)
 578         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 579         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 580 ifeq ($(DEBUG_BACKEND),simulavr)
 581         @echo load  >> $(GDBINIT_FILE)
 582 endif
 583         @echo break main >> $(GDBINIT_FILE)
 584
 585 debug: gdb-config $(TARGET).elf
 586 ifeq ($(DEBUG_BACKEND), avarice)
 587         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 588         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 589         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 590         @$(WINSHELL) /c pause
 591
 592 else
 593         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 594         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 595 endif
 596         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 597
 598
 599
 600
 601 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 602 COFFCONVERT = $(OBJCOPY) --debugging
 603 COFFCONVERT += --change-section-address .data-0x800000
 604 COFFCONVERT += --change-section-address .bss-0x800000
 605 COFFCONVERT += --change-section-address .noinit-0x800000
 606 COFFCONVERT += --change-section-address .eeprom-0x810000
 607
 608
 609
 610 coff: $(TARGET).elf
 611         @echo
 612         @echo $(MSG_COFF) $(TARGET).cof
 613         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 614
 615
 616 extcoff: $(TARGET).elf
 617         @echo
 618         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 619         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 620
 621
 622
 623 # Create final output files (.hex, .eep) from ELF output file.
 624 %.hex: %.elf
 625         @echo
 626         @echo $(MSG_FLASH) $@
 627         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 628
 629 %.eep: %.elf
 630         @echo
 631         @echo $(MSG_EEPROM) $@
 632         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 633         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 634
 635 # Create extended listing file from ELF output file.
 636 %.lss: %.elf
 637         @echo
 638         @echo $(MSG_EXTENDED_LISTING) $@
 639         $(OBJDUMP) -h -S -z $< > $@
 640
 641 # Create a symbol table from ELF output file.
 642 %.sym: %.elf
 643         @echo
 644         @echo $(MSG_SYMBOL_TABLE) $@
 645         $(NM) -n $< > $@
 646
 647
 648
 649 # Create library from object files.
 650 .SECONDARY : $(TARGET).a
 651 .PRECIOUS : $(OBJ)
 652 %.a: $(OBJ)
 653         @echo
 654         @echo $(MSG_CREATING_LIBRARY) $@
 655         $(AR) $@ $(OBJ)
 656
 657
 658 # Link: create ELF output file from object files.
 659 .SECONDARY : $(TARGET).elf
 660 .PRECIOUS : $(OBJ)
 661 %.elf: $(OBJ)
 662         @echo
 663         @echo $(MSG_LINKING) $@
 664         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 665
 666
 667 # Compile: create object files from C source files.
 668 $(OBJDIR)/%.o : %.c
 669         @echo
 670         @echo $(MSG_COMPILING) $<
 671         $(CC) -c $(ALL_CFLAGS) $< -o $@
 672
 673
 674 # Compile: create object files from C++ source files.
 675 $(OBJDIR)/%.o : %.cpp
 676         @echo
 677         @echo $(MSG_COMPILING_CPP) $<
 678         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 679
 680
 681 # Compile: create assembler files from C source files.
 682 %.s : %.c
 683         $(CC) -S $(ALL_CFLAGS) $< -o $@
 684
 685
 686 # Compile: create assembler files from C++ source files.
 687 %.s : %.cpp
 688         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 689
 690
 691 # Assemble: create object files from assembler source files.
 692 $(OBJDIR)/%.o : %.S
 693         @echo
 694         @echo $(MSG_ASSEMBLING) $<
 695         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 696
 697
 698 # Create preprocessed source for use in sending a bug report.
 699 %.i : %.c
 700         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 701
 702
 703 # Target: clean project.
 704 clean: begin clean_list end
 705
 706 clean_list :
 707         @echo
 708         @echo $(MSG_CLEANING)
 709         $(REMOVE) $(TARGET).hex
 710         $(REMOVE) $(TARGET).eep
 711         $(REMOVE) $(TARGET).cof
 712         $(REMOVE) $(TARGET).elf
 713         $(REMOVE) $(TARGET).map
 714         $(REMOVE) $(TARGET).sym
 715         $(REMOVE) $(TARGET).lss
 716         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 717         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 718         $(REMOVE) $(SRC:.c=.s)
 719         $(REMOVE) $(SRC:.c=.d)
 720         $(REMOVE) $(SRC:.c=.i)
 721         $(REMOVEDIR) .dep
 722
 723 doxygen:
 724         @echo Generating Project Documentation \($(TARGET)\)...
 725         @doxygen Doxygen.conf
 726         @echo Documentation Generation Complete.
 727
 728 clean_doxygen:
 729         rm -rf Documentation
 730
 731 checksource:
 732         @for f in $(SRC) $(CPPSRC) $(ASRC); do \
 733                 if [ -f $$f ]; then \
 734                         echo "Found Source File: $$f" ; \
 735                 else \
 736                         echo "Source File Not Found: $$f" ; \
 737                 fi; done
 738
 739
 740 # Create object files directory
 741 $(shell mkdir $(OBJDIR) 2>/dev/null)
 742
 743
 744 # Include the dependency files.
 745 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 746
 747
 748 # Listing of phony targets.
 749 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 750 build elf hex eep lss sym coff extcoff doxygen clean          \
 751 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 752 debug gdb-config checksource