Projects/Webserver/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = Webserver
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../../
 116
 117
 118 # LUFA library compile-time options
 119 LUFA_OPTS  = -D FIXED_CONTROL_ENDPOINT_SIZE=8
 120 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 121 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 122 LUFA_OPTS += -D FAST_STREAM_TRANSFERS
 123 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 124
 125
 126 # List C source files here. (C dependencies are automatically generated.)
 127 SRC = $(TARGET).c                                                 \
 128           Descriptors.c                                               \
 129           USBDeviceMode.c                                             \
 130           USBHostMode.c                                               \
 131           Lib/SCSI.c                                                  \
 132           Lib/DataflashManager.c                                      \
 133           Lib/uIPManagement.c                                         \
 134           Lib/DHCPClientApp.c                                         \
 135           Lib/HTTPServerApp.c                                         \
 136           Lib/TELNETServerApp.c                                       \
 137           Lib/uip/uip.c                                               \
 138           Lib/uip/uip_arp.c                                           \
 139           Lib/uip/timer.c                                             \
 140           Lib/uip/clock.c                                             \
 141           Lib/FATFs/diskio.c                                          \
 142           Lib/FATFs/ff.c                                              \
 143           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 144           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 145           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 146           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 147           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 151           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 152           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 153           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MassStorage.c    \
 154           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/MassStorage.c      \
 155           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/RNDIS.c          \
 156           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/RNDIS.c            \
 157
 158 # List C++ source files here. (C dependencies are automatically generated.)
 159 CPPSRC =
 160
 161
 162 # List Assembler source files here.
 163 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 164 #     will not be considered source files but generated files (assembler
 165 #     output from the compiler), and will be deleted upon "make clean"!
 166 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 167 #     it will preserve the spelling of the filenames, and gcc itself does
 168 #     care about how the name is spelled on its command-line.
 169 ASRC =
 170
 171
 172 # Optimization level, can be [0, 1, 2, 3, s].
 173 #     0 = turn off optimization. s = optimize for size.
 174 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 175 OPT = s
 176
 177
 178 # Debugging format.
 179 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 180 #     AVR Studio 4.10 requires dwarf-2.
 181 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 182 DEBUG = dwarf-2
 183
 184
 185 # List any extra directories to look for include files here.
 186 #     Each directory must be seperated by a space.
 187 #     Use forward slashes for directory separators.
 188 #     For a directory that has spaces, enclose it in quotes.
 189 EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
 190
 191
 192 # Compiler flag to set the C Standard level.
 193 #     c89   = "ANSI" C
 194 #     gnu89 = c89 plus GCC extensions
 195 #     c99   = ISO C99 standard (not yet fully implemented)
 196 #     gnu99 = c99 plus GCC extensions
 197 CSTANDARD = -std=gnu99
 198
 199
 200 # Place -D or -U options here for C sources
 201 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 202 CDEFS += -DENABLE_DHCP_CLIENT
 203 CDEFS += -DMAX_URI_LENGTH=50
 204
 205 CDEFS += -DUIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT)" -DUIP_CONF_TCP=1 -DUIP_CONF_UDP_CONNS=1 -DUIP_CONF_MAX_CONNECTIONS=3
 206 CDEFS += -DUIP_CONF_MAX_LISTENPORTS=5 -DUIP_URGDATA=0 -DUIP_CONF_BUFFER_SIZE=1514 -DUIP_ARCH_CHKSUM=0
 207 CDEFS += -DUIP_CONF_LL_802154=0 -DUIP_CONF_LL_80211=0 -DUIP_CONF_ROUTER=0 -DUIP_CONF_ICMP6=0
 208 CDEFS += -DUIP_ARCH_ADD32=0 -DUIP_CONF_ICMP_DEST_UNREACH=1 -DUIP_NEIGHBOR_CONF_ADDRTYPE=0
 209
 210
 211 # Place -D or -U options here for ASM sources
 212 ADEFS = -DF_CPU=$(F_CPU)
 213
 214
 215 # Place -D or -U options here for C++ sources
 216 CPPDEFS = -DF_CPU=$(F_CPU)UL
 217 #CPPDEFS += -D__STDC_LIMIT_MACROS
 218 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 219
 220
 221
 222 #---------------- Compiler Options C ----------------
 223 #  -g*:          generate debugging information
 224 #  -O*:          optimization level
 225 #  -f...:        tuning, see GCC manual and avr-libc documentation
 226 #  -Wall...:     warning level
 227 #  -Wa,...:      tell GCC to pass this to the assembler.
 228 #    -adhlns...: create assembler listing
 229 CFLAGS = -g$(DEBUG)
 230 CFLAGS += $(CDEFS)
 231 CFLAGS += -O$(OPT)
 232 CFLAGS += -funsigned-char
 233 CFLAGS += -funsigned-bitfields
 234 CFLAGS += -ffunction-sections
 235 CFLAGS += -fno-inline-small-functions
 236 CFLAGS += -fpack-struct
 237 CFLAGS += -fshort-enums
 238 CFLAGS += -Wall
 239 CFLAGS += -Wstrict-prototypes
 240 CFLAGS += -Wundef
 241 #CFLAGS += -fno-unit-at-a-time
 242 #CFLAGS += -Wunreachable-code
 243 #CFLAGS += -Wsign-compare
 244 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 245 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 246 CFLAGS += $(CSTANDARD)
 247
 248
 249 #---------------- Compiler Options C++ ----------------
 250 #  -g*:          generate debugging information
 251 #  -O*:          optimization level
 252 #  -f...:        tuning, see GCC manual and avr-libc documentation
 253 #  -Wall...:     warning level
 254 #  -Wa,...:      tell GCC to pass this to the assembler.
 255 #    -adhlns...: create assembler listing
 256 CPPFLAGS = -g$(DEBUG)
 257 CPPFLAGS += $(CPPDEFS)
 258 CPPFLAGS += -O$(OPT)
 259 CPPFLAGS += -funsigned-char
 260 CPPFLAGS += -funsigned-bitfields
 261 CPPFLAGS += -fpack-struct
 262 CPPFLAGS += -fshort-enums
 263 CPPFLAGS += -fno-exceptions
 264 CPPFLAGS += -Wall
 265 CFLAGS += -Wundef
 266 #CPPFLAGS += -mshort-calls
 267 #CPPFLAGS += -fno-unit-at-a-time
 268 #CPPFLAGS += -Wstrict-prototypes
 269 #CPPFLAGS += -Wunreachable-code
 270 #CPPFLAGS += -Wsign-compare
 271 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 272 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 273 #CPPFLAGS += $(CSTANDARD)
 274
 275
 276 #---------------- Assembler Options ----------------
 277 #  -Wa,...:   tell GCC to pass this to the assembler.
 278 #  -adhlns:   create listing
 279 #  -gstabs:   have the assembler create line number information; note that
 280 #             for use in COFF files, additional information about filenames
 281 #             and function names needs to be present in the assembler source
 282 #             files -- see avr-libc docs [FIXME: not yet described there]
 283 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 284 #       dump that will be displayed for a given single line of source input.
 285 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 286
 287
 288 #---------------- Library Options ----------------
 289 # Minimalistic printf version
 290 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 291
 292 # Floating point printf version (requires MATH_LIB = -lm below)
 293 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 294
 295 # If this is left blank, then it will use the Standard printf version.
 296 PRINTF_LIB =
 297 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 298 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 299
 300
 301 # Minimalistic scanf version
 302 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 303
 304 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 305 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 306
 307 # If this is left blank, then it will use the Standard scanf version.
 308 SCANF_LIB =
 309 #SCANF_LIB = $(SCANF_LIB_MIN)
 310 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 311
 312
 313 MATH_LIB = -lm
 314
 315
 316 # List any extra directories to look for libraries here.
 317 #     Each directory must be seperated by a space.
 318 #     Use forward slashes for directory separators.
 319 #     For a directory that has spaces, enclose it in quotes.
 320 EXTRALIBDIRS =
 321
 322
 323
 324 #---------------- External Memory Options ----------------
 325
 326 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 327 # used for variables (.data/.bss) and heap (malloc()).
 328 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 329
 330 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 331 # only used for heap (malloc()).
 332 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 333
 334 EXTMEMOPTS =
 335
 336
 337
 338 #---------------- Linker Options ----------------
 339 #  -Wl,...:     tell GCC to pass this to linker.
 340 #    -Map:      create map file
 341 #    --cref:    add cross reference to  map file
 342 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 343 LDFLAGS += -Wl,--relax
 344 LDFLAGS += -Wl,--gc-sections
 345 LDFLAGS += $(EXTMEMOPTS)
 346 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 347 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 348 #LDFLAGS += -T linker_script.x
 349
 350
 351
 352 #---------------- Programming Options (avrdude) ----------------
 353
 354 # Programming hardware: alf avr910 avrisp bascom bsd
 355 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 356 #
 357 # Type: avrdude -c ?
 358 # to get a full listing.
 359 #
 360 AVRDUDE_PROGRAMMER = jtagmkII
 361
 362 # com1 = serial port. Use lpt1 to connect to parallel port.
 363 AVRDUDE_PORT = usb
 364
 365 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 366 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 367
 368
 369 # Uncomment the following if you want avrdude's erase cycle counter.
 370 # Note that this counter needs to be initialized first using -Yn,
 371 # see avrdude manual.
 372 #AVRDUDE_ERASE_COUNTER = -y
 373
 374 # Uncomment the following if you do /not/ wish a verification to be
 375 # performed after programming the device.
 376 #AVRDUDE_NO_VERIFY = -V
 377
 378 # Increase verbosity level.  Please use this when submitting bug
 379 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 380 # to submit bug reports.
 381 #AVRDUDE_VERBOSE = -v -v
 382
 383 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 384 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 385 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 386 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 387
 388
 389
 390 #---------------- Debugging Options ----------------
 391
 392 # For simulavr only - target MCU frequency.
 393 DEBUG_MFREQ = $(F_CPU)
 394
 395 # Set the DEBUG_UI to either gdb or insight.
 396 # DEBUG_UI = gdb
 397 DEBUG_UI = insight
 398
 399 # Set the debugging back-end to either avarice, simulavr.
 400 DEBUG_BACKEND = avarice
 401 #DEBUG_BACKEND = simulavr
 402
 403 # GDB Init Filename.
 404 GDBINIT_FILE = __avr_gdbinit
 405
 406 # When using avarice settings for the JTAG
 407 JTAG_DEV = /dev/com1
 408
 409 # Debugging port used to communicate between GDB / avarice / simulavr.
 410 DEBUG_PORT = 4242
 411
 412 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 413 #     just set to localhost unless doing some sort of crazy debugging when
 414 #     avarice is running on a different computer.
 415 DEBUG_HOST = localhost
 416
 417
 418
 419 #============================================================================
 420
 421
 422 # Define programs and commands.
 423 SHELL = sh
 424 CC = avr-gcc
 425 OBJCOPY = avr-objcopy
 426 OBJDUMP = avr-objdump
 427 SIZE = avr-size
 428 AR = avr-ar rcs
 429 NM = avr-nm
 430 AVRDUDE = avrdude
 431 REMOVE = rm -f
 432 REMOVEDIR = rm -rf
 433 COPY = cp
 434 WINSHELL = cmd
 435
 436 # Define Messages
 437 # English
 438 MSG_ERRORS_NONE = Errors: none
 439 MSG_BEGIN = -------- begin --------
 440 MSG_END = --------  end  --------
 441 MSG_SIZE_BEFORE = Size before:
 442 MSG_SIZE_AFTER = Size after:
 443 MSG_COFF = Converting to AVR COFF:
 444 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 445 MSG_FLASH = Creating load file for Flash:
 446 MSG_EEPROM = Creating load file for EEPROM:
 447 MSG_EXTENDED_LISTING = Creating Extended Listing:
 448 MSG_SYMBOL_TABLE = Creating Symbol Table:
 449 MSG_LINKING = Linking:
 450 MSG_COMPILING = Compiling C:
 451 MSG_COMPILING_CPP = Compiling C++:
 452 MSG_ASSEMBLING = Assembling:
 453 MSG_CLEANING = Cleaning project:
 454 MSG_CREATING_LIBRARY = Creating library:
 455
 456
 457
 458
 459 # Define all object files.
 460 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 461
 462 # Define all listing files.
 463 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 464
 465
 466 # Compiler flags to generate dependency files.
 467 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 468
 469
 470 # Combine all necessary flags and optional flags.
 471 # Add target processor to flags.
 472 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 473 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 474 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 475
 476
 477
 478
 479
 480 # Default target.
 481 all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
 482
 483 # Change the build target to build a HEX file or a library.
 484 build: elf hex eep lss sym
 485 #build: lib
 486
 487
 488 elf: $(TARGET).elf
 489 hex: $(TARGET).hex
 490 eep: $(TARGET).eep
 491 lss: $(TARGET).lss
 492 sym: $(TARGET).sym
 493 LIBNAME=lib$(TARGET).a
 494 lib: $(LIBNAME)
 495
 496
 497
 498 # Eye candy.
 499 # AVR Studio 3.x does not check make's exit code but relies on
 500 # the following magic strings to be generated by the compile job.
 501 begin:
 502         @echo
 503         @echo $(MSG_BEGIN)
 504
 505 end:
 506         @echo $(MSG_END)
 507         @echo
 508
 509
 510 # Display size of file.
 511 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 512 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 513 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 514 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 515
 516 sizebefore:
 517         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 518         2>/dev/null; echo; fi
 519
 520 sizeafter:
 521         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 522         2>/dev/null; echo; fi
 523
 524 $(LUFA_PATH)/LUFA/LUFA_Events.lst:
 525         @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
 526
 527 checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
 528         @echo
 529         @echo Checking for invalid events...
 530         @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
 531                          grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
 532         @sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
 533         @if test -s InvalidEvents.tmp; then exit 1; fi
 534
 535 showliboptions:
 536         @echo
 537         @echo ---- Compile Time Library Options ----
 538         @for i in $(LUFA_OPTS:-D%=%); do \
 539                 echo $$i; \
 540         done
 541         @echo --------------------------------------
 542
 543 showtarget:
 544         @echo
 545         @echo --------- Target Information ---------
 546         @echo AVR Model: $(MCU)
 547         @echo Board:     $(BOARD)
 548         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 549         @echo --------------------------------------
 550
 551
 552 # Display compiler version information.
 553 gccversion :
 554         @$(CC) --version
 555
 556
 557 # Program the device.
 558 program: $(TARGET).hex $(TARGET).eep
 559         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 560
 561 flip: $(TARGET).hex
 562         batchisp -hardware usb -device $(MCU) -operation erase f
 563         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 564         batchisp -hardware usb -device $(MCU) -operation start reset 0
 565
 566 dfu: $(TARGET).hex
 567         dfu-programmer $(MCU) erase
 568         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 569         dfu-programmer $(MCU) reset
 570
 571 flip-ee: $(TARGET).hex $(TARGET).eep
 572         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 573         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 574         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 575         batchisp -hardware usb -device $(MCU) -operation start reset 0
 576         $(REMOVE) $(TARGET)eep.hex
 577
 578 dfu-ee: $(TARGET).hex $(TARGET).eep
 579         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 580         dfu-programmer $(MCU) reset
 581
 582
 583 # Generate avr-gdb config/init file which does the following:
 584 #     define the reset signal, load the target file, connect to target, and set
 585 #     a breakpoint at main().
 586 gdb-config:
 587         @$(REMOVE) $(GDBINIT_FILE)
 588         @echo define reset >> $(GDBINIT_FILE)
 589         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 590         @echo end >> $(GDBINIT_FILE)
 591         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 592         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 593 ifeq ($(DEBUG_BACKEND),simulavr)
 594         @echo load  >> $(GDBINIT_FILE)
 595 endif
 596         @echo break main >> $(GDBINIT_FILE)
 597
 598 debug: gdb-config $(TARGET).elf
 599 ifeq ($(DEBUG_BACKEND), avarice)
 600         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 601         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 602         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 603         @$(WINSHELL) /c pause
 604
 605 else
 606         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 607         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 608 endif
 609         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 610
 611
 612
 613
 614 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 615 COFFCONVERT = $(OBJCOPY) --debugging
 616 COFFCONVERT += --change-section-address .data-0x800000
 617 COFFCONVERT += --change-section-address .bss-0x800000
 618 COFFCONVERT += --change-section-address .noinit-0x800000
 619 COFFCONVERT += --change-section-address .eeprom-0x810000
 620
 621
 622
 623 coff: $(TARGET).elf
 624         @echo
 625         @echo $(MSG_COFF) $(TARGET).cof
 626         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 627
 628
 629 extcoff: $(TARGET).elf
 630         @echo
 631         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 632         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 633
 634
 635
 636 # Create final output files (.hex, .eep) from ELF output file.
 637 %.hex: %.elf
 638         @echo
 639         @echo $(MSG_FLASH) $@
 640         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 641
 642 %.eep: %.elf
 643         @echo
 644         @echo $(MSG_EEPROM) $@
 645         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 646         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 647
 648 # Create extended listing file from ELF output file.
 649 %.lss: %.elf
 650         @echo
 651         @echo $(MSG_EXTENDED_LISTING) $@
 652         $(OBJDUMP) -h -z -S $< > $@
 653
 654 # Create a symbol table from ELF output file.
 655 %.sym: %.elf
 656         @echo
 657         @echo $(MSG_SYMBOL_TABLE) $@
 658         $(NM) -n $< > $@
 659
 660
 661
 662 # Create library from object files.
 663 .SECONDARY : $(TARGET).a
 664 .PRECIOUS : $(OBJ)
 665 %.a: $(OBJ)
 666         @echo
 667         @echo $(MSG_CREATING_LIBRARY) $@
 668         $(AR) $@ $(OBJ)
 669
 670
 671 # Link: create ELF output file from object files.
 672 .SECONDARY : $(TARGET).elf
 673 .PRECIOUS : $(OBJ)
 674 %.elf: $(OBJ)
 675         @echo
 676         @echo $(MSG_LINKING) $@
 677         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 678
 679
 680 # Compile: create object files from C source files.
 681 $(OBJDIR)/%.o : %.c
 682         @echo
 683         @echo $(MSG_COMPILING) $<
 684         $(CC) -c $(ALL_CFLAGS) $< -o $@
 685
 686
 687 # Compile: create object files from C++ source files.
 688 $(OBJDIR)/%.o : %.cpp
 689         @echo
 690         @echo $(MSG_COMPILING_CPP) $<
 691         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 692
 693
 694 # Compile: create assembler files from C source files.
 695 %.s : %.c
 696         $(CC) -S $(ALL_CFLAGS) $< -o $@
 697
 698
 699 # Compile: create assembler files from C++ source files.
 700 %.s : %.cpp
 701         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 702
 703
 704 # Assemble: create object files from assembler source files.
 705 $(OBJDIR)/%.o : %.S
 706         @echo
 707         @echo $(MSG_ASSEMBLING) $<
 708         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 709
 710
 711 # Create preprocessed source for use in sending a bug report.
 712 %.i : %.c
 713         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 714
 715
 716 # Target: clean project.
 717 clean: begin clean_list clean_binary end
 718
 719 clean_binary:
 720         $(REMOVE) $(TARGET).hex
 721
 722 clean_list:
 723         @echo $(MSG_CLEANING)
 724         $(REMOVE) $(TARGET).eep
 725         $(REMOVE) $(TARGET)eep.hex
 726         $(REMOVE) $(TARGET).cof
 727         $(REMOVE) $(TARGET).elf
 728         $(REMOVE) $(TARGET).map
 729         $(REMOVE) $(TARGET).sym
 730         $(REMOVE) $(TARGET).lss
 731         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 732         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 733         $(REMOVE) $(SRC:.c=.s)
 734         $(REMOVE) $(SRC:.c=.d)
 735         $(REMOVE) $(SRC:.c=.i)
 736         $(REMOVE) InvalidEvents.tmp
 737         $(REMOVEDIR) .dep
 738
 739 doxygen:
 740         @echo Generating Project Documentation...
 741         @doxygen Doxygen.conf
 742         @echo Documentation Generation Complete.
 743
 744 clean_doxygen:
 745         rm -rf Documentation
 746
 747 # Create object files directory
 748 $(shell mkdir $(OBJDIR) 2>/dev/null)
 749
 750
 751 # Include the dependency files.
 752 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 753
 754
 755 # Listing of phony targets.
 756 .PHONY : all checkinvalidevents showliboptions    \
 757 showtarget begin finish end sizebefore sizeafter  \
 758 gccversion build elf hex eep lss sym coff extcoff \
 759 program dfu flip flip-ee dfu-ee clean debug       \
 760 clean_list clean_binary gdb-config doxygen