Demos/Host/ClassDriver/MouseHostWithParser/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = MouseHostWithParser
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../../../..
 116
 117
 118 # LUFA library compile-time options and predefined tokens
 119 LUFA_OPTS  = -D USB_HOST_ONLY
 120 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 121
 122
 123 # Create the LUFA source path variables by including the LUFA root makefile
 124 include $(LUFA_PATH)/LUFA/makefile
 125
 126
 127 # List C source files here. (C dependencies are automatically generated.)
 128 SRC = $(TARGET).c                                                 \
 129           $(LUFA_SRC_USB)                                             \
 130           $(LUFA_SRC_USBCLASS)                                        \
 131           $(LUFA_SRC_SERIAL)                                          \
 132           $(LUFA_SRC_SERIALSTREAM)
 133
 134
 135 # List C++ source files here. (C dependencies are automatically generated.)
 136 CPPSRC =
 137
 138
 139 # List Assembler source files here.
 140 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 141 #     will not be considered source files but generated files (assembler
 142 #     output from the compiler), and will be deleted upon "make clean"!
 143 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 144 #     it will preserve the spelling of the filenames, and gcc itself does
 145 #     care about how the name is spelled on its command-line.
 146 ASRC =
 147
 148
 149 # Optimization level, can be [0, 1, 2, 3, s].
 150 #     0 = turn off optimization. s = optimize for size.
 151 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 152 OPT = s
 153
 154
 155 # Debugging format.
 156 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 157 #     AVR Studio 4.10 requires dwarf-2.
 158 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 159 DEBUG = dwarf-2
 160
 161
 162 # List any extra directories to look for include files here.
 163 #     Each directory must be seperated by a space.
 164 #     Use forward slashes for directory separators.
 165 #     For a directory that has spaces, enclose it in quotes.
 166 EXTRAINCDIRS = $(LUFA_PATH)/
 167
 168
 169 # Compiler flag to set the C Standard level.
 170 #     c89   = "ANSI" C
 171 #     gnu89 = c89 plus GCC extensions
 172 #     c99   = ISO C99 standard (not yet fully implemented)
 173 #     gnu99 = c99 plus GCC extensions
 174 CSTANDARD = -std=c99
 175
 176
 177 # Place -D or -U options here for C sources
 178 CDEFS  = -DF_CPU=$(F_CPU)UL
 179 CDEFS += -DF_CLOCK=$(F_CLOCK)UL
 180 CDEFS += -DBOARD=BOARD_$(BOARD)
 181 CDEFS += $(LUFA_OPTS)
 182
 183
 184 # Place -D or -U options here for ASM sources
 185 ADEFS  = -DF_CPU=$(F_CPU)
 186 ADEFS += -DF_CLOCK=$(F_CLOCK)UL
 187 ADEFS += -DBOARD=BOARD_$(BOARD)
 188 ADEFS += $(LUFA_OPTS)
 189
 190 # Place -D or -U options here for C++ sources
 191 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 192 CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
 193 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 194 CPPDEFS += $(LUFA_OPTS)
 195 #CPPDEFS += -D__STDC_LIMIT_MACROS
 196 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 197
 198
 199
 200 #---------------- Compiler Options C ----------------
 201 #  -g*:          generate debugging information
 202 #  -O*:          optimization level
 203 #  -f...:        tuning, see GCC manual and avr-libc documentation
 204 #  -Wall...:     warning level
 205 #  -Wa,...:      tell GCC to pass this to the assembler.
 206 #    -adhlns...: create assembler listing
 207 CFLAGS = -g$(DEBUG)
 208 CFLAGS += $(CDEFS)
 209 CFLAGS += -O$(OPT)
 210 CFLAGS += -funsigned-char
 211 CFLAGS += -funsigned-bitfields
 212 CFLAGS += -ffunction-sections
 213 CFLAGS += -fno-inline-small-functions
 214 CFLAGS += -fpack-struct
 215 CFLAGS += -fshort-enums
 216 CFLAGS += -fno-strict-aliasing
 217 CFLAGS += -Wall
 218 CFLAGS += -Wstrict-prototypes
 219 #CFLAGS += -mshort-calls
 220 #CFLAGS += -fno-unit-at-a-time
 221 #CFLAGS += -Wundef
 222 #CFLAGS += -Wunreachable-code
 223 #CFLAGS += -Wsign-compare
 224 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 225 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 226 CFLAGS += $(CSTANDARD)
 227
 228
 229 #---------------- Compiler Options C++ ----------------
 230 #  -g*:          generate debugging information
 231 #  -O*:          optimization level
 232 #  -f...:        tuning, see GCC manual and avr-libc documentation
 233 #  -Wall...:     warning level
 234 #  -Wa,...:      tell GCC to pass this to the assembler.
 235 #    -adhlns...: create assembler listing
 236 CPPFLAGS = -g$(DEBUG)
 237 CPPFLAGS += $(CPPDEFS)
 238 CPPFLAGS += -O$(OPT)
 239 CPPFLAGS += -funsigned-char
 240 CPPFLAGS += -funsigned-bitfields
 241 CPPFLAGS += -fpack-struct
 242 CPPFLAGS += -fshort-enums
 243 CPPFLAGS += -fno-exceptions
 244 CPPFLAGS += -Wall
 245 CPPFLAGS += -Wundef
 246 #CPPFLAGS += -mshort-calls
 247 #CPPFLAGS += -fno-unit-at-a-time
 248 #CPPFLAGS += -Wstrict-prototypes
 249 #CPPFLAGS += -Wunreachable-code
 250 #CPPFLAGS += -Wsign-compare
 251 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 252 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 253 #CPPFLAGS += $(CSTANDARD)
 254
 255
 256 #---------------- Assembler Options ----------------
 257 #  -Wa,...:   tell GCC to pass this to the assembler.
 258 #  -adhlns:   create listing
 259 #  -gstabs:   have the assembler create line number information; note that
 260 #             for use in COFF files, additional information about filenames
 261 #             and function names needs to be present in the assembler source
 262 #             files -- see avr-libc docs [FIXME: not yet described there]
 263 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 264 #       dump that will be displayed for a given single line of source input.
 265 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 266
 267
 268 #---------------- Library Options ----------------
 269 # Minimalistic printf version
 270 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 271
 272 # Floating point printf version (requires MATH_LIB = -lm below)
 273 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 274
 275 # If this is left blank, then it will use the Standard printf version.
 276 PRINTF_LIB =
 277 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 278 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 279
 280
 281 # Minimalistic scanf version
 282 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 283
 284 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 285 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 286
 287 # If this is left blank, then it will use the Standard scanf version.
 288 SCANF_LIB =
 289 #SCANF_LIB = $(SCANF_LIB_MIN)
 290 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 291
 292
 293 MATH_LIB = -lm
 294
 295
 296 # List any extra directories to look for libraries here.
 297 #     Each directory must be seperated by a space.
 298 #     Use forward slashes for directory separators.
 299 #     For a directory that has spaces, enclose it in quotes.
 300 EXTRALIBDIRS =
 301
 302
 303
 304 #---------------- External Memory Options ----------------
 305
 306 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 307 # used for variables (.data/.bss) and heap (malloc()).
 308 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 309
 310 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 311 # only used for heap (malloc()).
 312 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 313
 314 EXTMEMOPTS =
 315
 316
 317
 318 #---------------- Linker Options ----------------
 319 #  -Wl,...:     tell GCC to pass this to linker.
 320 #    -Map:      create map file
 321 #    --cref:    add cross reference to  map file
 322 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 323 LDFLAGS += -Wl,--relax
 324 LDFLAGS += -Wl,--gc-sections
 325 LDFLAGS += $(EXTMEMOPTS)
 326 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 327 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 328 #LDFLAGS += -T linker_script.x
 329
 330
 331
 332 #---------------- Programming Options (avrdude) ----------------
 333
 334 # Programming hardware
 335 # Type: avrdude -c ?
 336 # to get a full listing.
 337 #
 338 AVRDUDE_PROGRAMMER = jtagmkII
 339
 340 # com1 = serial port. Use lpt1 to connect to parallel port.
 341 AVRDUDE_PORT = usb
 342
 343 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 344 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 345
 346
 347 # Uncomment the following if you want avrdude's erase cycle counter.
 348 # Note that this counter needs to be initialized first using -Yn,
 349 # see avrdude manual.
 350 #AVRDUDE_ERASE_COUNTER = -y
 351
 352 # Uncomment the following if you do /not/ wish a verification to be
 353 # performed after programming the device.
 354 #AVRDUDE_NO_VERIFY = -V
 355
 356 # Increase verbosity level.  Please use this when submitting bug
 357 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 358 # to submit bug reports.
 359 #AVRDUDE_VERBOSE = -v -v
 360
 361 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 362 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 363 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 364 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 365
 366
 367
 368 #---------------- Debugging Options ----------------
 369
 370 # For simulavr only - target MCU frequency.
 371 DEBUG_MFREQ = $(F_CPU)
 372
 373 # Set the DEBUG_UI to either gdb or insight.
 374 # DEBUG_UI = gdb
 375 DEBUG_UI = insight
 376
 377 # Set the debugging back-end to either avarice, simulavr.
 378 DEBUG_BACKEND = avarice
 379 #DEBUG_BACKEND = simulavr
 380
 381 # GDB Init Filename.
 382 GDBINIT_FILE = __avr_gdbinit
 383
 384 # When using avarice settings for the JTAG
 385 JTAG_DEV = /dev/com1
 386
 387 # Debugging port used to communicate between GDB / avarice / simulavr.
 388 DEBUG_PORT = 4242
 389
 390 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 391 #     just set to localhost unless doing some sort of crazy debugging when
 392 #     avarice is running on a different computer.
 393 DEBUG_HOST = localhost
 394
 395
 396
 397 #============================================================================
 398
 399
 400 # Define programs and commands.
 401 SHELL = sh
 402 CC = avr-gcc
 403 OBJCOPY = avr-objcopy
 404 OBJDUMP = avr-objdump
 405 SIZE = avr-size
 406 AR = avr-ar rcs
 407 NM = avr-nm
 408 AVRDUDE = avrdude
 409 REMOVE = rm -f
 410 REMOVEDIR = rm -rf
 411 COPY = cp
 412 WINSHELL = cmd
 413
 414
 415 # Define Messages
 416 # English
 417 MSG_ERRORS_NONE = Errors: none
 418 MSG_BEGIN = -------- begin --------
 419 MSG_END = --------  end  --------
 420 MSG_SIZE_BEFORE = Size before:
 421 MSG_SIZE_AFTER = Size after:
 422 MSG_COFF = Converting to AVR COFF:
 423 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 424 MSG_FLASH = Creating load file for Flash:
 425 MSG_EEPROM = Creating load file for EEPROM:
 426 MSG_EXTENDED_LISTING = Creating Extended Listing:
 427 MSG_SYMBOL_TABLE = Creating Symbol Table:
 428 MSG_LINKING = Linking:
 429 MSG_COMPILING = Compiling C:
 430 MSG_COMPILING_CPP = Compiling C++:
 431 MSG_ASSEMBLING = Assembling:
 432 MSG_CLEANING = Cleaning project:
 433 MSG_CREATING_LIBRARY = Creating library:
 434
 435
 436
 437
 438 # Define all object files.
 439 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 440
 441 # Define all listing files.
 442 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 443
 444
 445 # Compiler flags to generate dependency files.
 446 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 447
 448
 449 # Combine all necessary flags and optional flags.
 450 # Add target processor to flags.
 451 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 452 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 453 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 454
 455
 456
 457
 458
 459 # Default target.
 460 all: begin gccversion sizebefore build sizeafter end
 461
 462 # Change the build target to build a HEX file or a library.
 463 build: elf hex eep lss sym
 464 #build: lib
 465
 466
 467 elf: $(TARGET).elf
 468 hex: $(TARGET).hex
 469 eep: $(TARGET).eep
 470 lss: $(TARGET).lss
 471 sym: $(TARGET).sym
 472 LIBNAME=lib$(TARGET).a
 473 lib: $(LIBNAME)
 474
 475
 476
 477 # Eye candy.
 478 # AVR Studio 3.x does not check make's exit code but relies on
 479 # the following magic strings to be generated by the compile job.
 480 begin:
 481         @echo
 482         @echo $(MSG_BEGIN)
 483
 484 end:
 485         @echo $(MSG_END)
 486         @echo
 487
 488
 489 # Display size of file.
 490 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 491 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 492 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 493 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 494
 495
 496 sizebefore:
 497         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 498         2>/dev/null; echo; fi
 499
 500 sizeafter:
 501         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 502         2>/dev/null; echo; fi
 503
 504
 505
 506 # Display compiler version information.
 507 gccversion :
 508         @$(CC) --version
 509
 510
 511 # Program the device.
 512 program: $(TARGET).hex $(TARGET).eep
 513         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 514
 515 flip: $(TARGET).hex
 516         batchisp -hardware usb -device $(MCU) -operation erase f
 517         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 518         batchisp -hardware usb -device $(MCU) -operation start reset 0
 519
 520 dfu: $(TARGET).hex
 521         dfu-programmer $(MCU) erase
 522         dfu-programmer $(MCU) flash $(TARGET).hex
 523         dfu-programmer $(MCU) reset
 524
 525 flip-ee: $(TARGET).hex $(TARGET).eep
 526         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 527         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 528         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 529         batchisp -hardware usb -device $(MCU) -operation start reset 0
 530         $(REMOVE) $(TARGET)eep.hex
 531
 532 dfu-ee: $(TARGET).hex $(TARGET).eep
 533         dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 534         dfu-programmer $(MCU) reset
 535
 536
 537 # Generate avr-gdb config/init file which does the following:
 538 #     define the reset signal, load the target file, connect to target, and set
 539 #     a breakpoint at main().
 540 gdb-config:
 541         @$(REMOVE) $(GDBINIT_FILE)
 542         @echo define reset >> $(GDBINIT_FILE)
 543         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 544         @echo end >> $(GDBINIT_FILE)
 545         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 546         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 547 ifeq ($(DEBUG_BACKEND),simulavr)
 548         @echo load  >> $(GDBINIT_FILE)
 549 endif
 550         @echo break main >> $(GDBINIT_FILE)
 551
 552 debug: gdb-config $(TARGET).elf
 553 ifeq ($(DEBUG_BACKEND), avarice)
 554         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 555         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 556         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 557         @$(WINSHELL) /c pause
 558
 559 else
 560         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 561         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 562 endif
 563         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 564
 565
 566
 567
 568 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 569 COFFCONVERT = $(OBJCOPY) --debugging
 570 COFFCONVERT += --change-section-address .data-0x800000
 571 COFFCONVERT += --change-section-address .bss-0x800000
 572 COFFCONVERT += --change-section-address .noinit-0x800000
 573 COFFCONVERT += --change-section-address .eeprom-0x810000
 574
 575
 576
 577 coff: $(TARGET).elf
 578         @echo
 579         @echo $(MSG_COFF) $(TARGET).cof
 580         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 581
 582
 583 extcoff: $(TARGET).elf
 584         @echo
 585         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 586         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 587
 588
 589
 590 # Create final output files (.hex, .eep) from ELF output file.
 591 %.hex: %.elf
 592         @echo
 593         @echo $(MSG_FLASH) $@
 594         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 595
 596 %.eep: %.elf
 597         @echo
 598         @echo $(MSG_EEPROM) $@
 599         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 600         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 601
 602 # Create extended listing file from ELF output file.
 603 %.lss: %.elf
 604         @echo
 605         @echo $(MSG_EXTENDED_LISTING) $@
 606         $(OBJDUMP) -h -S -z $< > $@
 607
 608 # Create a symbol table from ELF output file.
 609 %.sym: %.elf
 610         @echo
 611         @echo $(MSG_SYMBOL_TABLE) $@
 612         $(NM) -n $< > $@
 613
 614
 615
 616 # Create library from object files.
 617 .SECONDARY : $(TARGET).a
 618 .PRECIOUS : $(OBJ)
 619 %.a: $(OBJ)
 620         @echo
 621         @echo $(MSG_CREATING_LIBRARY) $@
 622         $(AR) $@ $(OBJ)
 623
 624
 625 # Link: create ELF output file from object files.
 626 .SECONDARY : $(TARGET).elf
 627 .PRECIOUS : $(OBJ)
 628 %.elf: $(OBJ)
 629         @echo
 630         @echo $(MSG_LINKING) $@
 631         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 632
 633
 634 # Compile: create object files from C source files.
 635 $(OBJDIR)/%.o : %.c
 636         @echo
 637         @echo $(MSG_COMPILING) $<
 638         $(CC) -c $(ALL_CFLAGS) $< -o $@
 639
 640
 641 # Compile: create object files from C++ source files.
 642 $(OBJDIR)/%.o : %.cpp
 643         @echo
 644         @echo $(MSG_COMPILING_CPP) $<
 645         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 646
 647
 648 # Compile: create assembler files from C source files.
 649 %.s : %.c
 650         $(CC) -S $(ALL_CFLAGS) $< -o $@
 651
 652
 653 # Compile: create assembler files from C++ source files.
 654 %.s : %.cpp
 655         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 656
 657
 658 # Assemble: create object files from assembler source files.
 659 $(OBJDIR)/%.o : %.S
 660         @echo
 661         @echo $(MSG_ASSEMBLING) $<
 662         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 663
 664
 665 # Create preprocessed source for use in sending a bug report.
 666 %.i : %.c
 667         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 668
 669
 670 # Target: clean project.
 671 clean: begin clean_list end
 672
 673 clean_list :
 674         @echo
 675         @echo $(MSG_CLEANING)
 676         $(REMOVE) $(TARGET).hex
 677         $(REMOVE) $(TARGET).eep
 678         $(REMOVE) $(TARGET).cof
 679         $(REMOVE) $(TARGET).elf
 680         $(REMOVE) $(TARGET).map
 681         $(REMOVE) $(TARGET).sym
 682         $(REMOVE) $(TARGET).lss
 683         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 684         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 685         $(REMOVE) $(SRC:.c=.s)
 686         $(REMOVE) $(SRC:.c=.d)
 687         $(REMOVE) $(SRC:.c=.i)
 688         $(REMOVEDIR) .dep
 689
 690 doxygen:
 691         @echo Generating Project Documentation...
 692         @doxygen Doxygen.conf
 693         @echo Documentation Generation Complete.
 694
 695 clean_doxygen:
 696         rm -rf Documentation
 697
 698 # Create object files directory
 699 $(shell mkdir $(OBJDIR) 2>/dev/null)
 700
 701
 702 # Include the dependency files.
 703 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 704
 705
 706 # Listing of phony targets.
 707 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 708 build elf hex eep lss sym coff extcoff doxygen clean          \
 709 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 710 debug gdb-config
 711