Demos/Device/Joystick/Joystick.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2009.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6       www.fourwalledcubicle.com
   7 */
   8
   9 /*
  10   Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, and distribute this software
  13   and its documentation for any purpose and without fee is hereby
  14   granted, provided that the above copyright notice appear in all
  15   copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Main source file for the Joystick demo. This file contains the main tasks of the demo and
  34  *  is responsible for the initial application hardware configuration.
  35  */
  36
  37 #include "Joystick.h"
  38
  39 /* Scheduler Task List */
  40 TASK_LIST
  41 {
  42         { .Task = USB_USBTask          , .TaskStatus = TASK_STOP },
  43         { .Task = USB_Joystick_Report  , .TaskStatus = TASK_STOP },
  44 };
  45
  46 /** Main program entry point. This routine configures the hardware required by the application, then
  47  *  starts the scheduler to run the application tasks.
  48  */
  49 int main(void)
  50 {
  51         /* Disable watchdog if enabled by bootloader/fuses */
  52         MCUSR &= ~(1 << WDRF);
  53         wdt_disable();
  54
  55         /* Disable clock division */
  56         clock_prescale_set(clock_div_1);
  57
  58         /* Hardware Initialization */
  59         Joystick_Init();
  60         LEDs_Init();
  61         HWB_Init();
  62
  63         /* Indicate USB not ready */
  64         UpdateStatus(Status_USBNotReady);
  65
  66         /* Initialize Scheduler so that it can be used */
  67         Scheduler_Init();
  68
  69         /* Initialize USB Subsystem */
  70         USB_Init();
  71
  72         /* Scheduling - routine never returns, so put this last in the main function */
  73         Scheduler_Start();
  74 }
  75
  76 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
  77  *  starts the library USB task to begin the enumeration and USB management process.
  78  */
  79 EVENT_HANDLER(USB_Connect)
  80 {
  81         /* Start USB management task */
  82         Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
  83
  84         /* Indicate USB enumerating */
  85         UpdateStatus(Status_USBEnumerating);
  86 }
  87
  88 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
  89  *  the status LEDs and stops the USB management and joystick reporting tasks.
  90  */
  91 EVENT_HANDLER(USB_Disconnect)
  92 {
  93         /* Stop running joystick reporting and USB management tasks */
  94         Scheduler_SetTaskMode(USB_Joystick_Report, TASK_STOP);
  95         Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
  96
  97         /* Indicate USB not ready */
  98         UpdateStatus(Status_USBNotReady);
  99 }
 100
 101 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
 102  *  of the USB device after enumeration - the device endpoints are configured and the joystick reporting task started.
 103  */
 104 EVENT_HANDLER(USB_ConfigurationChanged)
 105 {
 106         /* Setup Joystick Report Endpoint */
 107         Endpoint_ConfigureEndpoint(JOYSTICK_EPNUM, EP_TYPE_INTERRUPT,
 108                                        ENDPOINT_DIR_IN, JOYSTICK_EPSIZE,
 109                                    ENDPOINT_BANK_SINGLE);
 110
 111         /* Indicate USB connected and ready */
 112         UpdateStatus(Status_USBReady);
 113
 114         /* Start joystick reporting task */
 115         Scheduler_SetTaskMode(USB_Joystick_Report, TASK_RUN);
 116 }
 117
 118 /** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
 119  *  control requests that are not handled internally by the USB library (including the HID commands, which are
 120  *  all issued via the control endpoint), so that they can be handled appropriately for the application.
 121  */
 122 EVENT_HANDLER(USB_UnhandledControlPacket)
 123 {
 124         /* Handle HID Class specific requests */
 125         switch (USB_ControlRequest.bRequest)
 126         {
 127                 case REQ_GetReport:
 128                         if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 129                         {
 130                                 USB_JoystickReport_Data_t JoystickReportData;
 131
 132                                 Endpoint_ClearSETUP();
 133
 134                                 /* Create the next HID report to send to the host */
 135                                 GetNextReport(&JoystickReportData);
 136
 137                                 /* Write the report data to the control endpoint */
 138                                 Endpoint_Write_Control_Stream_LE(&JoystickReportData, sizeof(JoystickReportData));
 139
 140                                 /* Finalize the stream transfer to send the last packet or clear the host abort */
 141                                 Endpoint_ClearOUT();
 142                         }
 143
 144                         break;
 145         }
 146 }
 147
 148 /** Fills the given HID report data structure with the next HID report to send to the host.
 149  *
 150  *  \param ReportData  Pointer to a HID report data structure to be filled
 151  *
 152  *  \return Boolean true if the new report differs from the last report, false otherwise
 153  */
 154 bool GetNextReport(USB_JoystickReport_Data_t* ReportData)
 155 {
 156         static uint8_t PrevJoyStatus = 0;
 157         uint8_t        JoyStatus_LCL        = Joystick_GetStatus();
 158         bool           InputChanged         = false;
 159
 160         /* Clear the report contents */
 161         memset(ReportData, 0, sizeof(USB_JoystickReport_Data_t));
 162
 163         if (JoyStatus_LCL & JOY_UP)
 164           ReportData->Y = -100;
 165         else if (JoyStatus_LCL & JOY_DOWN)
 166           ReportData->Y =  100;
 167
 168         if (JoyStatus_LCL & JOY_RIGHT)
 169           ReportData->X =  100;
 170         else if (JoyStatus_LCL & JOY_LEFT)
 171           ReportData->X = -100;
 172
 173         if (JoyStatus_LCL & JOY_PRESS)
 174           ReportData->Button  = (1 << 1);
 175
 176         if (HWB_GetStatus())
 177           ReportData->Button |= (1 << 0);
 178
 179         /* Check if the new report is different to the previous report */
 180         InputChanged = (uint8_t)(PrevJoyStatus ^ JoyStatus_LCL);
 181
 182         /* Save the current joystick status for later comparison */
 183         PrevJoyStatus = JoyStatus_LCL;
 184
 185         /* Return whether the new report is different to the previous report or not */
 186         return InputChanged;
 187 }
 188
 189 /** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
 190  *  log to a serial port, or anything else that is suitable for status updates.
 191  *
 192  *  \param CurrentStatus  Current status of the system, from the Joystick_StatusCodes_t enum
 193  */
 194 void UpdateStatus(uint8_t CurrentStatus)
 195 {
 196         uint8_t LEDMask = LEDS_NO_LEDS;
 197
 198         /* Set the LED mask to the appropriate LED mask based on the given status code */
 199         switch (CurrentStatus)
 200         {
 201                 case Status_USBNotReady:
 202                         LEDMask = (LEDS_LED1);
 203                         break;
 204                 case Status_USBEnumerating:
 205                         LEDMask = (LEDS_LED1 | LEDS_LED2);
 206                         break;
 207                 case Status_USBReady:
 208                         LEDMask = (LEDS_LED2 | LEDS_LED4);
 209                         break;
 210         }
 211
 212         /* Set the board LEDs to the new LED mask */
 213         LEDs_SetAllLEDs(LEDMask);
 214 }
 215
 216 /** Function to manage HID report generation and transmission to the host. */
 217 TASK(USB_Joystick_Report)
 218 {
 219         /* Check if the USB System is connected to a Host */
 220         if (USB_IsConnected)
 221         {
 222                 /* Select the Joystick Report Endpoint */
 223                 Endpoint_SelectEndpoint(JOYSTICK_EPNUM);
 224
 225                 /* Check to see if the host is ready for another packet */
 226                 if (Endpoint_IsINReady())
 227                 {
 228                         USB_JoystickReport_Data_t JoystickReportData;
 229
 230                         /* Create the next HID report to send to the host */
 231                         GetNextReport(&JoystickReportData);
 232
 233                         /* Write Joystick Report Data */
 234                         Endpoint_Write_Stream_LE(&JoystickReportData, sizeof(JoystickReportData));
 235
 236                         /* Finalize the stream transfer to send the last packet */
 237                         Endpoint_ClearIN();
 238
 239                         /* Clear the report data afterwards */
 240                         memset(&JoystickReportData, 0, sizeof(JoystickReportData));
 241                 }
 242         }
 243 }