3  *  This file contains special DoxyGen information for the generation of the main page and other special
 
   4  *  documentation pages. It is not a project source file.
 
   7 /** \mainpage Mass Storage Host Demo
 
   9  *  \section SSec_Compat Demo Compatibility:
 
  11  *  The following table indicates what microcontrollers are compatible with this demo.
 
  16  *  \section SSec_Info USB Information:
 
  18  *  The following table gives a rundown of the USB utilization of this demo.
 
  22  *    <td><b>USB Mode:</b></td>
 
  26  *    <td><b>USB Class:</b></td>
 
  27  *    <td>Mass Storage Device</td>
 
  30  *    <td><b>USB Subclass:</b></td>
 
  34  *    <td><b>Relevant Standards:</b></td>
 
  35  *    <td>USBIF Mass Storage Standard</td>
 
  36  *    <td>USB Bulk-Only Transport Standard</td>
 
  37  *    <td>SCSI Primary Commands Specification</td>
 
  38  *    <td>SCSI Block Commands Specification</td>
 
  41  *    <td><b>Usable Speeds:</b></td>
 
  42  *    <td>Full Speed Mode</td>
 
  46  *  \section SSec_Description Project Description: 
 
  48  *  Mass Storage host demonstration application. This gives a simple reference
 
  49  *  application for implementing a USB Mass Storage host, for USB storage devices
 
  50  *  using the standard Mass Storage USB profile.
 
  52  *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped
 
  53  *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
 
  54  *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
 
  55  *  of the disk will be dumped to the serial port.
 
  57  *  \section SSec_Options Project Options
 
  59  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.