Demos/Device/LowLevel/RNDISEthernet/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #     Typical values are:
  78 #         F_CPU =  1000000
  79 #         F_CPU =  1843200
  80 #         F_CPU =  2000000
  81 #         F_CPU =  3686400
  82 #         F_CPU =  4000000
  83 #         F_CPU =  7372800
  84 #         F_CPU =  8000000
  85 #         F_CPU = 11059200
  86 #         F_CPU = 14745600
  87 #         F_CPU = 16000000
  88 #         F_CPU = 18432000
  89 #         F_CPU = 20000000
  90 F_CPU = 8000000
  91
  92
  93 # Input clock frequency.
  94 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  95 #     input clock frequency (before any prescaling is performed). This value may
  96 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  97 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  98 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  99 #     at the end, this will be done automatically to create a 32-bit value in your
 100 #     source code.
 101 #
 102 #     If no clock division is performed on the input clock inside the AVR (via the
 103 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 104 F_CLOCK = 8000000
 105
 106
 107 # Output format. (can be srec, ihex, binary)
 108 FORMAT = ihex
 109
 110
 111 # Target file name (without extension).
 112 TARGET = RNDISEthernet
 113
 114
 115 # Object files directory
 116 #     To put object files in current directory, use a dot (.), do NOT make
 117 #     this an empty or blank macro!
 118 OBJDIR = .
 119
 120
 121 # Path to the LUFA library
 122 LUFA_PATH = ../../..
 123
 124
 125 # List C source files here. (C dependencies are automatically generated.)
 126 SRC = $(TARGET).c                                                 \
 127       Descriptors.c                                               \
 128       Lib/RNDIS.c                                                 \
 129           Lib/Ethernet.c                                              \
 130           Lib/ProtocolDecoders.c                                      \
 131           Lib/ICMP.c                                                  \
 132           Lib/TCP.c                                                   \
 133           Lib/UDP.c                                                   \
 134           Lib/DHCP.c                                                  \
 135           Lib/ARP.c                                                   \
 136           Lib/IP.c                                                    \
 137           Lib/Webserver.c                                             \
 138           $(LUFA_PATH)/LUFA/Scheduler/Scheduler.c                     \
 139           $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c         \
 140           $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 141           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 142           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 143           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 144           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 145           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 146           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 147           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 151           $(LUFA_PATH)/LUFA/Drivers/USB/Class/HIDParser.c             \
 152
 153
 154 # List C++ source files here. (C dependencies are automatically generated.)
 155 CPPSRC =
 156
 157
 158 # List Assembler source files here.
 159 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 160 #     will not be considered source files but generated files (assembler
 161 #     output from the compiler), and will be deleted upon "make clean"!
 162 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 163 #     it will preserve the spelling of the filenames, and gcc itself does
 164 #     care about how the name is spelled on its command-line.
 165 ASRC =
 166
 167
 168 # Optimization level, can be [0, 1, 2, 3, s].
 169 #     0 = turn off optimization. s = optimize for size.
 170 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 171 OPT = s
 172
 173
 174 # Debugging format.
 175 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 176 #     AVR Studio 4.10 requires dwarf-2.
 177 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 178 DEBUG = dwarf-2
 179
 180
 181 # List any extra directories to look for include files here.
 182 #     Each directory must be seperated by a space.
 183 #     Use forward slashes for directory separators.
 184 #     For a directory that has spaces, enclose it in quotes.
 185 EXTRAINCDIRS = $(LUFA_PATH)/
 186
 187
 188 # Compiler flag to set the C Standard level.
 189 #     c89   = "ANSI" C
 190 #     gnu89 = c89 plus GCC extensions
 191 #     c99   = ISO C99 standard (not yet fully implemented)
 192 #     gnu99 = c99 plus GCC extensions
 193 CSTANDARD = -std=gnu99
 194
 195
 196 # Place -D or -U options here for C sources
 197 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
 198 CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS -DUSB_DEVICE_ONLY
 199 CDEFS += -DFIXED_CONTROL_ENDPOINT_SIZE=8 -DUSE_SINGLE_DEVICE_CONFIGURATION
 200 CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 201 CDEFS += -DNO_DECODE_ETHERNET -DNO_DECODE_ARP -DNO_DECODE_ICMP -DNO_DECODE_IP -DNO_DECODE_TCP -DNO_DECODE_UDP -DNO_DECODE_DHCP
 202
 203
 204 # Place -D or -U options here for ASM sources
 205 ADEFS = -DF_CPU=$(F_CPU)
 206
 207
 208 # Place -D or -U options here for C++ sources
 209 CPPDEFS = -DF_CPU=$(F_CPU)UL
 210 #CPPDEFS += -D__STDC_LIMIT_MACROS
 211 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 212
 213
 214
 215 #---------------- Compiler Options C ----------------
 216 #  -g*:          generate debugging information
 217 #  -O*:          optimization level
 218 #  -f...:        tuning, see GCC manual and avr-libc documentation
 219 #  -Wall...:     warning level
 220 #  -Wa,...:      tell GCC to pass this to the assembler.
 221 #    -adhlns...: create assembler listing
 222 CFLAGS = -g$(DEBUG)
 223 CFLAGS += $(CDEFS)
 224 CFLAGS += -O$(OPT)
 225 CFLAGS += -funsigned-char
 226 CFLAGS += -funsigned-bitfields
 227 CFLAGS += -ffunction-sections
 228 CFLAGS += -fpack-struct
 229 CFLAGS += -fshort-enums
 230 CFLAGS += -finline-limit=20
 231 CFLAGS += -Wall
 232 CFLAGS += -Wstrict-prototypes
 233 CFLAGS += -Wundef
 234 #CFLAGS += -fno-unit-at-a-time
 235 #CFLAGS += -Wunreachable-code
 236 #CFLAGS += -Wsign-compare
 237 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 238 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 239 CFLAGS += $(CSTANDARD)
 240
 241
 242 #---------------- Compiler Options C++ ----------------
 243 #  -g*:          generate debugging information
 244 #  -O*:          optimization level
 245 #  -f...:        tuning, see GCC manual and avr-libc documentation
 246 #  -Wall...:     warning level
 247 #  -Wa,...:      tell GCC to pass this to the assembler.
 248 #    -adhlns...: create assembler listing
 249 CPPFLAGS = -g$(DEBUG)
 250 CPPFLAGS += $(CPPDEFS)
 251 CPPFLAGS += -O$(OPT)
 252 CPPFLAGS += -funsigned-char
 253 CPPFLAGS += -funsigned-bitfields
 254 CPPFLAGS += -fpack-struct
 255 CPPFLAGS += -fshort-enums
 256 CPPFLAGS += -fno-exceptions
 257 CPPFLAGS += -Wall
 258 CFLAGS += -Wundef
 259 #CPPFLAGS += -mshort-calls
 260 #CPPFLAGS += -fno-unit-at-a-time
 261 #CPPFLAGS += -Wstrict-prototypes
 262 #CPPFLAGS += -Wunreachable-code
 263 #CPPFLAGS += -Wsign-compare
 264 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 265 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 266 #CPPFLAGS += $(CSTANDARD)
 267
 268
 269 #---------------- Assembler Options ----------------
 270 #  -Wa,...:   tell GCC to pass this to the assembler.
 271 #  -adhlns:   create listing
 272 #  -gstabs:   have the assembler create line number information; note that
 273 #             for use in COFF files, additional information about filenames
 274 #             and function names needs to be present in the assembler source
 275 #             files -- see avr-libc docs [FIXME: not yet described there]
 276 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 277 #       dump that will be displayed for a given single line of source input.
 278 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 279
 280
 281 #---------------- Library Options ----------------
 282 # Minimalistic printf version
 283 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 284
 285 # Floating point printf version (requires MATH_LIB = -lm below)
 286 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 287
 288 # If this is left blank, then it will use the Standard printf version.
 289 PRINTF_LIB =
 290 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 291 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 292
 293
 294 # Minimalistic scanf version
 295 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 296
 297 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 298 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 299
 300 # If this is left blank, then it will use the Standard scanf version.
 301 SCANF_LIB =
 302 #SCANF_LIB = $(SCANF_LIB_MIN)
 303 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 304
 305
 306 MATH_LIB = -lm
 307
 308
 309 # List any extra directories to look for libraries here.
 310 #     Each directory must be seperated by a space.
 311 #     Use forward slashes for directory separators.
 312 #     For a directory that has spaces, enclose it in quotes.
 313 EXTRALIBDIRS =
 314
 315
 316
 317 #---------------- External Memory Options ----------------
 318
 319 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 320 # used for variables (.data/.bss) and heap (malloc()).
 321 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 322
 323 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 324 # only used for heap (malloc()).
 325 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 326
 327 EXTMEMOPTS =
 328
 329
 330
 331 #---------------- Linker Options ----------------
 332 #  -Wl,...:     tell GCC to pass this to linker.
 333 #    -Map:      create map file
 334 #    --cref:    add cross reference to  map file
 335 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 336 LDFLAGS += -Wl,--relax
 337 LDFLAGS += -Wl,--gc-sections
 338 LDFLAGS += $(EXTMEMOPTS)
 339 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 340 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 341 #LDFLAGS += -T linker_script.x
 342
 343
 344
 345 #---------------- Programming Options (avrdude) ----------------
 346
 347 # Programming hardware: alf avr910 avrisp bascom bsd
 348 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 349 #
 350 # Type: avrdude -c ?
 351 # to get a full listing.
 352 #
 353 AVRDUDE_PROGRAMMER = jtagmkII
 354
 355 # com1 = serial port. Use lpt1 to connect to parallel port.
 356 AVRDUDE_PORT = usb
 357
 358 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 359 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 360
 361
 362 # Uncomment the following if you want avrdude's erase cycle counter.
 363 # Note that this counter needs to be initialized first using -Yn,
 364 # see avrdude manual.
 365 #AVRDUDE_ERASE_COUNTER = -y
 366
 367 # Uncomment the following if you do /not/ wish a verification to be
 368 # performed after programming the device.
 369 #AVRDUDE_NO_VERIFY = -V
 370
 371 # Increase verbosity level.  Please use this when submitting bug
 372 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 373 # to submit bug reports.
 374 #AVRDUDE_VERBOSE = -v -v
 375
 376 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 377 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 378 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 379 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 380
 381
 382
 383 #---------------- Debugging Options ----------------
 384
 385 # For simulavr only - target MCU frequency.
 386 DEBUG_MFREQ = $(F_CPU)
 387
 388 # Set the DEBUG_UI to either gdb or insight.
 389 # DEBUG_UI = gdb
 390 DEBUG_UI = insight
 391
 392 # Set the debugging back-end to either avarice, simulavr.
 393 DEBUG_BACKEND = avarice
 394 #DEBUG_BACKEND = simulavr
 395
 396 # GDB Init Filename.
 397 GDBINIT_FILE = __avr_gdbinit
 398
 399 # When using avarice settings for the JTAG
 400 JTAG_DEV = /dev/com1
 401
 402 # Debugging port used to communicate between GDB / avarice / simulavr.
 403 DEBUG_PORT = 4242
 404
 405 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 406 #     just set to localhost unless doing some sort of crazy debugging when
 407 #     avarice is running on a different computer.
 408 DEBUG_HOST = localhost
 409
 410
 411
 412 #============================================================================
 413
 414
 415 # Define programs and commands.
 416 SHELL = sh
 417 CC = avr-gcc
 418 OBJCOPY = avr-objcopy
 419 OBJDUMP = avr-objdump
 420 SIZE = avr-size
 421 AR = avr-ar rcs
 422 NM = avr-nm
 423 AVRDUDE = avrdude
 424 REMOVE = rm -f
 425 REMOVEDIR = rm -rf
 426 COPY = cp
 427 WINSHELL = cmd
 428
 429 # Define Messages
 430 # English
 431 MSG_ERRORS_NONE = Errors: none
 432 MSG_BEGIN = -------- begin --------
 433 MSG_END = --------  end  --------
 434 MSG_SIZE_BEFORE = Size before:
 435 MSG_SIZE_AFTER = Size after:
 436 MSG_COFF = Converting to AVR COFF:
 437 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 438 MSG_FLASH = Creating load file for Flash:
 439 MSG_EEPROM = Creating load file for EEPROM:
 440 MSG_EXTENDED_LISTING = Creating Extended Listing:
 441 MSG_SYMBOL_TABLE = Creating Symbol Table:
 442 MSG_LINKING = Linking:
 443 MSG_COMPILING = Compiling C:
 444 MSG_COMPILING_CPP = Compiling C++:
 445 MSG_ASSEMBLING = Assembling:
 446 MSG_CLEANING = Cleaning project:
 447 MSG_CREATING_LIBRARY = Creating library:
 448
 449
 450
 451
 452 # Define all object files.
 453 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 454
 455 # Define all listing files.
 456 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 457
 458
 459 # Compiler flags to generate dependency files.
 460 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 461
 462
 463 # Combine all necessary flags and optional flags.
 464 # Add target processor to flags.
 465 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 466 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 467 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 468
 469
 470
 471
 472
 473 # Default target.
 474 all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
 475
 476 # Change the build target to build a HEX file or a library.
 477 build: elf hex eep lss sym
 478 #build: lib
 479
 480
 481 elf: $(TARGET).elf
 482 hex: $(TARGET).hex
 483 eep: $(TARGET).eep
 484 lss: $(TARGET).lss
 485 sym: $(TARGET).sym
 486 LIBNAME=lib$(TARGET).a
 487 lib: $(LIBNAME)
 488
 489
 490
 491 # Eye candy.
 492 # AVR Studio 3.x does not check make's exit code but relies on
 493 # the following magic strings to be generated by the compile job.
 494 begin:
 495         @echo
 496         @echo $(MSG_BEGIN)
 497
 498 end:
 499         @echo $(MSG_END)
 500         @echo
 501
 502
 503 # Display size of file.
 504 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 505 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 506 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 507 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 508
 509 sizebefore:
 510         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 511         2>/dev/null; echo; fi
 512
 513 sizeafter:
 514         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 515         2>/dev/null; echo; fi
 516
 517 checkhooks: build
 518         @echo
 519         @echo ------- Unhooked LUFA Events -------
 520         @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
 521                    cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 522                            echo "(None)"
 523         @echo ------------------------------------
 524
 525 checklibmode:
 526         @echo
 527         @echo ----------- Library Mode -----------
 528         @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
 529                   | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
 530                   || echo "No specific mode (both device and host mode allowable)."
 531         @echo ------------------------------------
 532
 533 checkboard:
 534         @echo
 535         @echo ---------- Selected Board ----------
 536         @echo Selected board model is $(BOARD).
 537         @echo ------------------------------------
 538
 539 # Display compiler version information.
 540 gccversion :
 541         @$(CC) --version
 542
 543
 544
 545 # Program the device.
 546 program: $(TARGET).hex $(TARGET).eep
 547         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 548
 549 flip: $(TARGET).hex
 550         batchisp -hardware usb -device $(MCU) -operation erase f
 551         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 552         batchisp -hardware usb -device $(MCU) -operation start reset 0
 553
 554 dfu: $(TARGET).hex
 555         dfu-programmer $(MCU) erase
 556         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 557         dfu-programmer $(MCU) reset
 558
 559 flip-ee: $(TARGET).hex $(TARGET).eep
 560         copy $(TARGET).eep $(TARGET)eep.hex
 561         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 562         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 563         batchisp -hardware usb -device $(MCU) -operation start reset 0
 564
 565 dfu-ee: $(TARGET).hex $(TARGET).eep
 566         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 567         dfu-programmer $(MCU) reset
 568
 569
 570 # Generate avr-gdb config/init file which does the following:
 571 #     define the reset signal, load the target file, connect to target, and set
 572 #     a breakpoint at main().
 573 gdb-config:
 574         @$(REMOVE) $(GDBINIT_FILE)
 575         @echo define reset >> $(GDBINIT_FILE)
 576         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 577         @echo end >> $(GDBINIT_FILE)
 578         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 579         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 580 ifeq ($(DEBUG_BACKEND),simulavr)
 581         @echo load  >> $(GDBINIT_FILE)
 582 endif
 583         @echo break main >> $(GDBINIT_FILE)
 584
 585 debug: gdb-config $(TARGET).elf
 586 ifeq ($(DEBUG_BACKEND), avarice)
 587         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 588         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 589         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 590         @$(WINSHELL) /c pause
 591
 592 else
 593         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 594         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 595 endif
 596         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 597
 598
 599
 600
 601 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 602 COFFCONVERT = $(OBJCOPY) --debugging
 603 COFFCONVERT += --change-section-address .data-0x800000
 604 COFFCONVERT += --change-section-address .bss-0x800000
 605 COFFCONVERT += --change-section-address .noinit-0x800000
 606 COFFCONVERT += --change-section-address .eeprom-0x810000
 607
 608
 609
 610 coff: $(TARGET).elf
 611         @echo
 612         @echo $(MSG_COFF) $(TARGET).cof
 613         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 614
 615
 616 extcoff: $(TARGET).elf
 617         @echo
 618         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 619         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 620
 621
 622
 623 # Create final output files (.hex, .eep) from ELF output file.
 624 %.hex: %.elf
 625         @echo
 626         @echo $(MSG_FLASH) $@
 627         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 628
 629 %.eep: %.elf
 630         @echo
 631         @echo $(MSG_EEPROM) $@
 632         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 633         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 634
 635 # Create extended listing file from ELF output file.
 636 %.lss: %.elf
 637         @echo
 638         @echo $(MSG_EXTENDED_LISTING) $@
 639         $(OBJDUMP) -h -z -S $< > $@
 640
 641 # Create a symbol table from ELF output file.
 642 %.sym: %.elf
 643         @echo
 644         @echo $(MSG_SYMBOL_TABLE) $@
 645         $(NM) -n $< > $@
 646
 647
 648
 649 # Create library from object files.
 650 .SECONDARY : $(TARGET).a
 651 .PRECIOUS : $(OBJ)
 652 %.a: $(OBJ)
 653         @echo
 654         @echo $(MSG_CREATING_LIBRARY) $@
 655         $(AR) $@ $(OBJ)
 656
 657
 658 # Link: create ELF output file from object files.
 659 .SECONDARY : $(TARGET).elf
 660 .PRECIOUS : $(OBJ)
 661 %.elf: $(OBJ)
 662         @echo
 663         @echo $(MSG_LINKING) $@
 664         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 665
 666
 667 # Compile: create object files from C source files.
 668 $(OBJDIR)/%.o : %.c
 669         @echo
 670         @echo $(MSG_COMPILING) $<
 671         $(CC) -c $(ALL_CFLAGS) $< -o $@
 672
 673
 674 # Compile: create object files from C++ source files.
 675 $(OBJDIR)/%.o : %.cpp
 676         @echo
 677         @echo $(MSG_COMPILING_CPP) $<
 678         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 679
 680
 681 # Compile: create assembler files from C source files.
 682 %.s : %.c
 683         $(CC) -S $(ALL_CFLAGS) $< -o $@
 684
 685
 686 # Compile: create assembler files from C++ source files.
 687 %.s : %.cpp
 688         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 689
 690
 691 # Assemble: create object files from assembler source files.
 692 $(OBJDIR)/%.o : %.S
 693         @echo
 694         @echo $(MSG_ASSEMBLING) $<
 695         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 696
 697
 698 # Create preprocessed source for use in sending a bug report.
 699 %.i : %.c
 700         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 701
 702
 703 # Target: clean project.
 704 clean: begin clean_list clean_binary end
 705
 706 clean_binary:
 707         $(REMOVE) $(TARGET).hex
 708
 709 clean_list:
 710         @echo $(MSG_CLEANING)
 711         $(REMOVE) $(TARGET).eep
 712         $(REMOVE) $(TARGET)eep.hex
 713         $(REMOVE) $(TARGET).cof
 714         $(REMOVE) $(TARGET).elf
 715         $(REMOVE) $(TARGET).map
 716         $(REMOVE) $(TARGET).sym
 717         $(REMOVE) $(TARGET).lss
 718         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 719         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 720         $(REMOVE) $(SRC:.c=.s)
 721         $(REMOVE) $(SRC:.c=.d)
 722         $(REMOVE) $(SRC:.c=.i)
 723         $(REMOVEDIR) .dep
 724
 725
 726 doxygen:
 727         @echo Generating Project Documentation...
 728         @doxygen Doxygen.conf
 729         @echo Documentation Generation Complete.
 730
 731 clean_doxygen:
 732         rm -rf Documentation
 733
 734 # Create object files directory
 735 $(shell mkdir $(OBJDIR) 2>/dev/null)
 736
 737
 738 # Include the dependency files.
 739 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 740
 741
 742 # Listing of phony targets.
 743 .PHONY : all checkhooks checklibmode checkboard   \
 744 begin finish end sizebefore sizeafter gccversion  \
 745 build elf hex eep lss sym coff extcoff clean      \
 746 clean_list clean_binary program debug gdb-config  \
 747 doxygen dfu flip flip-ee dfu-ee