LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2011.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *  \brief USB Device definitions for the AVR8 microcontrollers.
  33  *  \copydetails Group_Device_AVR8
  34  *
  35  *  \note This file should not be included directly. It is automatically included as needed by the USB driver
  36  *        dispatch header located in LUFA/Drivers/USB/USB.h.
  37  */
  38
  39 /** \ingroup Group_Device
  40  *  \defgroup Group_Device_AVR8 Device Management (AVR8)
  41  *  \brief USB Device definitions for the AVR8 microcontrollers.
  42  *
  43  *  Architecture specific USB Device definitions for the Atmel 8-bit AVR microcontrollers.
  44  *
  45  *  @{
  46  */
  47
  48 #ifndef __USBDEVICE_AVR8_H__
  49 #define __USBDEVICE_AVR8_H__
  50
  51         /* Includes: */
  52                 #include "../../../../Common/Common.h"
  53                 #include "../StdDescriptors.h"
  54                 #include "../USBInterrupt.h"
  55                 #include "../Endpoint.h"
  56
  57         /* Preprocessor Checks: */
  58                 #if !defined(__INCLUDE_FROM_USB_DRIVER)
  59                         #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
  60                 #endif
  61
  62                 #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))
  63                         #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
  64                 #endif
  65
  66         /* Public Interface - May be used in end-application: */
  67                 /* Macros: */
  68                         /** \name USB Device Mode Option Masks */
  69                         //@{
  70                         #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
  71                                 /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
  72                                  *  USB interface should be initialized in low speed (1.5Mb/s) mode.
  73                                  *
  74                                  *  \note Low Speed mode is not available on all USB AVR models.
  75                                  *        \n
  76                                  *
  77                                  *  \note Restrictions apply on the number, size and type of endpoints which can be used
  78                                  *        when running in low speed mode - refer to the USB 2.0 specification.
  79                                  */
  80                                 #define USB_DEVICE_OPT_LOWSPEED            (1 << 0)
  81                         #endif
  82
  83                         /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
  84                          *  USB interface should be initialized in full speed (12Mb/s) mode.
  85                          */
  86                         #define USB_DEVICE_OPT_FULLSPEED               (0 << 0)
  87                         //@}
  88
  89                         #if (!defined(NO_INTERNAL_SERIAL) && \
  90                              (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__) || \
  91                               defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__)  || defined(__AVR_AT90USB1286__) ||  \
  92                               defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__)  || defined(__AVR_ATmega8U2__)))
  93                                 /** String descriptor index for the device's unique serial number string descriptor within the device.
  94                                  *  This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
  95                                  *  number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
  96                                  *  a unique serial number internally, and setting the device descriptors serial number string index to this value
  97                                  *  will cause it to use the internal serial number.
  98                                  *
  99                                  *  On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial
 100                                  *  number for the device.
 101                                  */
 102                                 #define USE_INTERNAL_SERIAL           0xDC
 103                         #else
 104                                 #define USE_INTERNAL_SERIAL           NO_DESCRIPTOR
 105                         #endif
 106
 107                 /* Function Prototypes: */
 108                         /** Sends a Remote Wakeup request to the host. This signals to the host that the device should
 109                          *  be taken out of suspended mode, and communications should resume.
 110                          *
 111                          *  Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
 112                          *  host computer when the host has suspended all USB devices to enter a low power state.
 113                          *
 114                          *  \note This macro should only be used if the device has indicated to the host that it
 115                          *        supports the Remote Wakeup feature in the device descriptors, and should only be
 116                          *        issued if the host is currently allowing remote wakeup events from the device (i.e.,
 117                          *        the \ref USB_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP compile
 118                          *        time option is used, this macro is unavailable.
 119                          *        \n\n
 120                          *
 121                          *  \note The USB clock must be running for this function to operate. If the stack is initialized with
 122                          *        the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
 123                          *        before attempting to call this function.
 124                          *
 125                          *  \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors.
 126                          */
 127                         void USB_Device_SendRemoteWakeup(void);
 128
 129                 /* Inline Functions: */
 130                         /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
 131                          *  the frame number is incremented by one.
 132                          */
 133                         static inline uint16_t USB_Device_GetFrameNumber(void)
 134                         {
 135                                 return UDFNUM;
 136                         }
 137
 138                         #if !defined(NO_SOF_EVENTS)
 139                                 /** Enables the device mode Start Of Frame events. When enabled, this causes the
 140                                  *  \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
 141                                  *  at the start of each USB frame when enumerated in device mode.
 142                                  *
 143                                  *  \note Not available when the \c NO_SOF_EVENTS compile time token is defined.
 144                                  */
 145                                 static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
 146                                 static inline void USB_Device_EnableSOFEvents(void)
 147                                 {
 148                                         USB_INT_Enable(USB_INT_SOFI);
 149                                 }
 150
 151                                 /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
 152                                  *  \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
 153                                  *
 154                                  *  \note Not available when the \c NO_SOF_EVENTS compile time token is defined.
 155                                  */
 156                                 static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
 157                                 static inline void USB_Device_DisableSOFEvents(void)
 158                                 {
 159                                         USB_INT_Disable(USB_INT_SOFI);
 160                                 }
 161                         #endif
 162
 163         /* Private Interface - For use in library only: */
 164         #if !defined(__DOXYGEN__)
 165                 /* Inline Functions: */
 166                         #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
 167                         static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
 168                         static inline void USB_Device_SetLowSpeed(void)
 169                         {
 170                                 UDCON |=  (1 << LSM);
 171                         }
 172
 173                         static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
 174                         static inline void USB_Device_SetFullSpeed(void)
 175                         {
 176                                 UDCON &= ~(1 << LSM);
 177                         }
 178                         #endif
 179
 180                         static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
 181                         static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
 182                         {
 183                                 UDADDR  = ((UDADDR & (1 << ADDEN)) | (Address & 0x7F));
 184                                 UDADDR |= (1 << ADDEN);
 185                         }
 186
 187                         static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE;
 188                         static inline bool USB_Device_IsAddressSet(void)
 189                         {
 190                                 return (UDADDR & (1 << ADDEN));
 191                         }
 192
 193                         static inline uint8_t USB_Device_GetSerialString(wchar_t* UnicodeString, const uint8_t MaxLen)
 194                         {
 195                                 uint8_t SerialCharNum = 0;
 196
 197                                 ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
 198                                 {
 199                                         uint8_t SigReadAddress = 0x0E;
 200
 201                                         for (SerialCharNum = 0; SerialCharNum < MIN(MaxLen, 20); SerialCharNum++)
 202                                         {
 203                                                 if (SerialCharNum == MaxLen)
 204                                                   break;
 205
 206                                                 uint8_t SerialByte = boot_signature_byte_get(SigReadAddress);
 207
 208                                                 if (SerialCharNum & 0x01)
 209                                                 {
 210                                                         SerialByte >>= 4;
 211                                                         SigReadAddress++;
 212                                                 }
 213
 214                                                 SerialByte &= 0x0F;
 215
 216                                                 UnicodeString[SerialCharNum] = (SerialByte >= 10) ?
 217                                                                                (('A' - 10) + SerialByte) : ('0' + SerialByte);
 218                                         }
 219                                 }
 220
 221                                 return SerialCharNum;
 222                         }
 223
 224         #endif
 225
 226 #endif
 227
 228 /** @} */
 229