Projects/Webserver/Lib/uip/uip.h

   1
   2 /**
   3  * \addtogroup uip
   4  * @{
   5  */
   6
   7 /**
   8  * \file
   9  * Header file for the uIP TCP/IP stack.
  10  * \author  Adam Dunkels <adam@dunkels.com>
  11  * \author  Julien Abeille <jabeille@cisco.com> (IPv6 related code)
  12  * \author  Mathilde Durvy <mdurvy@cisco.com> (IPv6 related code)
  13  *
  14  * The uIP TCP/IP stack header file contains definitions for a number
  15  * of C macros that are used by uIP programs as well as internal uIP
  16  * structures, TCP/IP header structures and function declarations.
  17  *
  18  */
  19
  20 /*
  21  * Copyright (c) 2001-2003, Adam Dunkels.
  22  * All rights reserved.
  23  *
  24  * Redistribution and use in source and binary forms, with or without
  25  * modification, are permitted provided that the following conditions
  26  * are met:
  27  * 1. Redistributions of source code must retain the above copyright
  28  *    notice, this list of conditions and the following disclaimer.
  29  * 2. Redistributions in binary form must reproduce the above copyright
  30  *    notice, this list of conditions and the following disclaimer in the
  31  *    documentation and/or other materials provided with the distribution.
  32  * 3. The name of the author may not be used to endorse or promote
  33  *    products derived from this software without specific prior
  34  *    written permission.
  35  *
  36  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  37  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  38  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  39  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  40  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  41  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  42  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  43  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  44  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  45  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  46  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  47  *
  48  * This file is part of the uIP TCP/IP stack.
  49  *
  50  * $Id: uip.h,v 1.24 2009/04/06 13:18:50 nvt-se Exp $
  51  *
  52  */
  53
  54 #ifndef __UIP_H__
  55 #define __UIP_H__
  56
  57 #include "uipopt.h"
  58
  59 /**
  60  * Representation of an IP address.
  61  *
  62  */
  63 #if UIP_CONF_IPV6
  64 typedef union uip_ip6addr_t {
  65   u8_t  u8[16];                 /* Initialiser, must come first!!! */
  66   u16_t u16[8];
  67 } uip_ip6addr_t;
  68
  69 typedef uip_ip6addr_t uip_ipaddr_t;
  70 #else /* UIP_CONF_IPV6 */
  71 typedef union uip_ip4addr_t {
  72   u8_t  u8[4];                  /* Initialiser, must come first!!! */
  73   u16_t u16[2];
  74 #if 0
  75   u32_t u32;
  76 #endif
  77 } uip_ip4addr_t;
  78 typedef uip_ip4addr_t uip_ipaddr_t;
  79 #endif /* UIP_CONF_IPV6 */
  80
  81
  82 /*---------------------------------------------------------------------------*/
  83
  84 /** \brief 16 bit 802.15.4 address */
  85 struct uip_802154_shortaddr {
  86   u8_t addr[2];
  87 };
  88 /** \brief 64 bit 802.15.4 address */
  89 struct uip_802154_longaddr {
  90   u8_t addr[8];
  91 };
  92
  93 /** \brief 802.11 address */
  94 struct uip_80211_addr {
  95   u8_t addr[6];
  96 };
  97
  98 /** \brief 802.3 address */
  99 struct uip_eth_addr {
 100   u8_t addr[6];
 101 };
 102
 103 #if UIP_CONF_LL_802154
 104 /** \brief 802.15.4 address */
 105 typedef struct uip_802154_longaddr uip_lladdr_t;
 106 #define UIP_802154_SHORTADDR_LEN 2
 107 #define UIP_802154_LONGADDR_LEN  8
 108 #define UIP_LLADDR_LEN UIP_802154_LONGADDR_LEN
 109 #else /*UIP_CONF_LL_802154*/
 110 #if UIP_CONF_LL_80211
 111 /** \brief 802.11 address */
 112 typedef struct uip_80211_addr uip_lladdr_t;
 113 #define UIP_LLADDR_LEN 6
 114 #else /*UIP_CONF_LL_80211*/
 115 /** \brief Ethernet address */
 116 typedef struct uip_eth_addr uip_lladdr_t;
 117 #define UIP_LLADDR_LEN 6
 118 #endif /*UIP_CONF_LL_80211*/
 119 #endif /*UIP_CONF_LL_802154*/
 120
 121 /*---------------------------------------------------------------------------*/
 122 /* First, the functions that should be called from the
 123  * system. Initialization, the periodic timer, and incoming packets are
 124  * handled by the following three functions.
 125  */
 126 /**
 127  * \defgroup uipconffunc uIP configuration functions
 128  * @{
 129  *
 130  * The uIP configuration functions are used for setting run-time
 131  * parameters in uIP such as IP addresses.
 132  */
 133
 134 /**
 135  * Set the IP address of this host.
 136  *
 137  * The IP address is represented as a 4-byte array where the first
 138  * octet of the IP address is put in the first member of the 4-byte
 139  * array.
 140  *
 141  * Example:
 142  \code
 143
 144  uip_ipaddr_t addr;
 145
 146  uip_ipaddr(&addr, 192,168,1,2);
 147  uip_sethostaddr(&addr);
 148
 149  \endcode
 150  * \param addr A pointer to an IP address of type uip_ipaddr_t;
 151  *
 152  * \sa uip_ipaddr()
 153  *
 154  * \hideinitializer
 155  */
 156 #define uip_sethostaddr(addr) uip_ipaddr_copy(&uip_hostaddr, (addr))
 157
 158 /**
 159  * Get the IP address of this host.
 160  *
 161  * The IP address is represented as a 4-byte array where the first
 162  * octet of the IP address is put in the first member of the 4-byte
 163  * array.
 164  *
 165  * Example:
 166  \code
 167  uip_ipaddr_t hostaddr;
 168
 169  uip_gethostaddr(&hostaddr);
 170  \endcode
 171  * \param addr A pointer to a uip_ipaddr_t variable that will be
 172  * filled in with the currently configured IP address.
 173  *
 174  * \hideinitializer
 175  */
 176 #define uip_gethostaddr(addr) uip_ipaddr_copy((addr), &uip_hostaddr)
 177
 178 /**
 179  * Set the default router's IP address.
 180  *
 181  * \param addr A pointer to a uip_ipaddr_t variable containing the IP
 182  * address of the default router.
 183  *
 184  * \sa uip_ipaddr()
 185  *
 186  * \hideinitializer
 187  */
 188 #define uip_setdraddr(addr) uip_ipaddr_copy(&uip_draddr, (addr))
 189
 190 /**
 191  * Set the netmask.
 192  *
 193  * \param addr A pointer to a uip_ipaddr_t variable containing the IP
 194  * address of the netmask.
 195  *
 196  * \sa uip_ipaddr()
 197  *
 198  * \hideinitializer
 199  */
 200 #define uip_setnetmask(addr) uip_ipaddr_copy(&uip_netmask, (addr))
 201
 202
 203 /**
 204  * Get the default router's IP address.
 205  *
 206  * \param addr A pointer to a uip_ipaddr_t variable that will be
 207  * filled in with the IP address of the default router.
 208  *
 209  * \hideinitializer
 210  */
 211 #define uip_getdraddr(addr) uip_ipaddr_copy((addr), &uip_draddr)
 212
 213 /**
 214  * Get the netmask.
 215  *
 216  * \param addr A pointer to a uip_ipaddr_t variable that will be
 217  * filled in with the value of the netmask.
 218  *
 219  * \hideinitializer
 220  */
 221 #define uip_getnetmask(addr) uip_ipaddr_copy((addr), &uip_netmask)
 222
 223 /** @} */
 224
 225 /**
 226  * \defgroup uipinit uIP initialization functions
 227  * @{
 228  *
 229  * The uIP initialization functions are used for booting uIP.
 230  */
 231
 232 /**
 233  * uIP initialization function.
 234  *
 235  * This function should be called at boot up to initialize the uIP
 236  * TCP/IP stack.
 237  */
 238 void uip_init(void);
 239
 240 /**
 241  * uIP initialization function.
 242  *
 243  * This function may be used at boot time to set the initial ip_id.
 244  */
 245 void uip_setipid(u16_t id);
 246
 247 /** @} */
 248
 249 /**
 250  * \defgroup uipdevfunc uIP device driver functions
 251  * @{
 252  *
 253  * These functions are used by a network device driver for interacting
 254  * with uIP.
 255  */
 256
 257 /**
 258  * Process an incoming packet.
 259  *
 260  * This function should be called when the device driver has received
 261  * a packet from the network. The packet from the device driver must
 262  * be present in the uip_buf buffer, and the length of the packet
 263  * should be placed in the uip_len variable.
 264  *
 265  * When the function returns, there may be an outbound packet placed
 266  * in the uip_buf packet buffer. If so, the uip_len variable is set to
 267  * the length of the packet. If no packet is to be sent out, the
 268  * uip_len variable is set to 0.
 269  *
 270  * The usual way of calling the function is presented by the source
 271  * code below.
 272  \code
 273  uip_len = devicedriver_poll();
 274  if(uip_len > 0) {
 275  uip_input();
 276  if(uip_len > 0) {
 277  devicedriver_send();
 278  }
 279  }
 280  \endcode
 281  *
 282  * \note If you are writing a uIP device driver that needs ARP
 283  * (Address Resolution Protocol), e.g., when running uIP over
 284  * Ethernet, you will need to call the uIP ARP code before calling
 285  * this function:
 286  \code
 287  #define BUF ((struct uip_eth_hdr *)&uip_buf[0])
 288  uip_len = ethernet_devicedrver_poll();
 289  if(uip_len > 0) {
 290  if(BUF->type == HTONS(UIP_ETHTYPE_IP)) {
 291  uip_arp_ipin();
 292  uip_input();
 293  if(uip_len > 0) {
 294  uip_arp_out();
 295  ethernet_devicedriver_send();
 296  }
 297  } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) {
 298  uip_arp_arpin();
 299  if(uip_len > 0) {
 300  ethernet_devicedriver_send();
 301  }
 302  }
 303  \endcode
 304  *
 305  * \hideinitializer
 306  */
 307 #define uip_input()        uip_process(UIP_DATA)
 308
 309
 310 /**
 311  * Periodic processing for a connection identified by its number.
 312  *
 313  * This function does the necessary periodic processing (timers,
 314  * polling) for a uIP TCP connection, and should be called when the
 315  * periodic uIP timer goes off. It should be called for every
 316  * connection, regardless of whether they are open of closed.
 317  *
 318  * When the function returns, it may have an outbound packet waiting
 319  * for service in the uIP packet buffer, and if so the uip_len
 320  * variable is set to a value larger than zero. The device driver
 321  * should be called to send out the packet.
 322  *
 323  * The usual way of calling the function is through a for() loop like
 324  * this:
 325  \code
 326  for(i = 0; i < UIP_CONNS; ++i) {
 327  uip_periodic(i);
 328  if(uip_len > 0) {
 329  devicedriver_send();
 330  }
 331  }
 332  \endcode
 333  *
 334  * \note If you are writing a uIP device driver that needs ARP
 335  * (Address Resolution Protocol), e.g., when running uIP over
 336  * Ethernet, you will need to call the uip_arp_out() function before
 337  * calling the device driver:
 338  \code
 339  for(i = 0; i < UIP_CONNS; ++i) {
 340  uip_periodic(i);
 341  if(uip_len > 0) {
 342  uip_arp_out();
 343  ethernet_devicedriver_send();
 344  }
 345  }
 346  \endcode
 347  *
 348  * \param conn The number of the connection which is to be periodically polled.
 349  *
 350  * \hideinitializer
 351  */
 352 #if UIP_TCP
 353 #define uip_periodic(conn) do { uip_conn = &uip_conns[conn];    \
 354     uip_process(UIP_TIMER); } while (0)
 355
 356 /**
 357  *
 358  *
 359  */
 360 #define uip_conn_active(conn) (uip_conns[conn].tcpstateflags != UIP_CLOSED)
 361
 362 /**
 363  * Perform periodic processing for a connection identified by a pointer
 364  * to its structure.
 365  *
 366  * Same as uip_periodic() but takes a pointer to the actual uip_conn
 367  * struct instead of an integer as its argument. This function can be
 368  * used to force periodic processing of a specific connection.
 369  *
 370  * \param conn A pointer to the uip_conn struct for the connection to
 371  * be processed.
 372  *
 373  * \hideinitializer
 374  */
 375 #define uip_periodic_conn(conn) do { uip_conn = conn;   \
 376     uip_process(UIP_TIMER); } while (0)
 377
 378 /**
 379  * Request that a particular connection should be polled.
 380  *
 381  * Similar to uip_periodic_conn() but does not perform any timer
 382  * processing. The application is polled for new data.
 383  *
 384  * \param conn A pointer to the uip_conn struct for the connection to
 385  * be processed.
 386  *
 387  * \hideinitializer
 388  */
 389 #define uip_poll_conn(conn) do { uip_conn = conn;       \
 390     uip_process(UIP_POLL_REQUEST); } while (0)
 391
 392 #endif /* UIP_TCP */
 393
 394 #if UIP_UDP
 395 /**
 396  * Periodic processing for a UDP connection identified by its number.
 397  *
 398  * This function is essentially the same as uip_periodic(), but for
 399  * UDP connections. It is called in a similar fashion as the
 400  * uip_periodic() function:
 401  \code
 402  for(i = 0; i < UIP_UDP_CONNS; i++) {
 403  uip_udp_periodic(i);
 404  if(uip_len > 0) {
 405  devicedriver_send();
 406  }
 407  }
 408  \endcode
 409  *
 410  * \note As for the uip_periodic() function, special care has to be
 411  * taken when using uIP together with ARP and Ethernet:
 412  \code
 413  for(i = 0; i < UIP_UDP_CONNS; i++) {
 414  uip_udp_periodic(i);
 415  if(uip_len > 0) {
 416  uip_arp_out();
 417  ethernet_devicedriver_send();
 418  }
 419  }
 420  \endcode
 421  *
 422  * \param conn The number of the UDP connection to be processed.
 423  *
 424  * \hideinitializer
 425  */
 426 #define uip_udp_periodic(conn) do { uip_udp_conn = &uip_udp_conns[conn]; \
 427     uip_process(UIP_UDP_TIMER); } while(0)
 428
 429 /**
 430  * Periodic processing for a UDP connection identified by a pointer to
 431  * its structure.
 432  *
 433  * Same as uip_udp_periodic() but takes a pointer to the actual
 434  * uip_conn struct instead of an integer as its argument. This
 435  * function can be used to force periodic processing of a specific
 436  * connection.
 437  *
 438  * \param conn A pointer to the uip_udp_conn struct for the connection
 439  * to be processed.
 440  *
 441  * \hideinitializer
 442  */
 443 #define uip_udp_periodic_conn(conn) do { uip_udp_conn = conn;   \
 444     uip_process(UIP_UDP_TIMER); } while(0)
 445 #endif /* UIP_UDP */
 446
 447 /** \brief Abandon the reassembly of the current packet */
 448 void uip_reass_over(void);
 449
 450 /**
 451  * The uIP packet buffer.
 452  *
 453  * The uip_buf array is used to hold incoming and outgoing
 454  * packets. The device driver should place incoming data into this
 455  * buffer. When sending data, the device driver should read the link
 456  * level headers and the TCP/IP headers from this buffer. The size of
 457  * the link level headers is configured by the UIP_LLH_LEN define.
 458  *
 459  * \note The application data need not be placed in this buffer, so
 460  * the device driver must read it from the place pointed to by the
 461  * uip_appdata pointer as illustrated by the following example:
 462  \code
 463  void
 464  devicedriver_send(void)
 465  {
 466  hwsend(&uip_buf[0], UIP_LLH_LEN);
 467  if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) {
 468  hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN);
 469  } else {
 470  hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN);
 471  hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN);
 472  }
 473  }
 474  \endcode
 475 */
 476 extern u8_t uip_buf[UIP_BUFSIZE+2];
 477
 478
 479
 480 /** @} */
 481
 482 /*---------------------------------------------------------------------------*/
 483 /* Functions that are used by the uIP application program. Opening and
 484  * closing connections, sending and receiving data, etc. is all
 485  * handled by the functions below.
 486  */
 487 /**
 488  * \defgroup uipappfunc uIP application functions
 489  * @{
 490  *
 491  * Functions used by an application running of top of uIP.
 492  */
 493
 494 /**
 495  * Start listening to the specified port.
 496  *
 497  * \note Since this function expects the port number in network byte
 498  * order, a conversion using HTONS() or htons() is necessary.
 499  *
 500  \code
 501  uip_listen(HTONS(80));
 502  \endcode
 503  *
 504  * \param port A 16-bit port number in network byte order.
 505  */
 506 void uip_listen(u16_t port);
 507
 508 /**
 509  * Stop listening to the specified port.
 510  *
 511  * \note Since this function expects the port number in network byte
 512  * order, a conversion using HTONS() or htons() is necessary.
 513  *
 514  \code
 515  uip_unlisten(HTONS(80));
 516  \endcode
 517  *
 518  * \param port A 16-bit port number in network byte order.
 519  */
 520 void uip_unlisten(u16_t port);
 521
 522 /**
 523  * Connect to a remote host using TCP.
 524  *
 525  * This function is used to start a new connection to the specified
 526  * port on the specified host. It allocates a new connection identifier,
 527  * sets the connection to the SYN_SENT state and sets the
 528  * retransmission timer to 0. This will cause a TCP SYN segment to be
 529  * sent out the next time this connection is periodically processed,
 530  * which usually is done within 0.5 seconds after the call to
 531  * uip_connect().
 532  *
 533  * \note This function is available only if support for active open
 534  * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h.
 535  *
 536  * \note Since this function requires the port number to be in network
 537  * byte order, a conversion using HTONS() or htons() is necessary.
 538  *
 539  \code
 540  uip_ipaddr_t ipaddr;
 541
 542  uip_ipaddr(&ipaddr, 192,168,1,2);
 543  uip_connect(&ipaddr, HTONS(80));
 544  \endcode
 545  *
 546  * \param ripaddr The IP address of the remote host.
 547  *
 548  * \param port A 16-bit port number in network byte order.
 549  *
 550  * \return A pointer to the uIP connection identifier for the new connection,
 551  * or NULL if no connection could be allocated.
 552  *
 553  */
 554 struct uip_conn *uip_connect(uip_ipaddr_t *ripaddr, u16_t port);
 555
 556
 557
 558 /**
 559  * \internal
 560  *
 561  * Check if a connection has outstanding (i.e., unacknowledged) data.
 562  *
 563  * \param conn A pointer to the uip_conn structure for the connection.
 564  *
 565  * \hideinitializer
 566  */
 567 #define uip_outstanding(conn) ((conn)->len)
 568
 569 /**
 570  * Send data on the current connection.
 571  *
 572  * This function is used to send out a single segment of TCP
 573  * data. Only applications that have been invoked by uIP for event
 574  * processing can send data.
 575  *
 576  * The amount of data that actually is sent out after a call to this
 577  * function is determined by the maximum amount of data TCP allows. uIP
 578  * will automatically crop the data so that only the appropriate
 579  * amount of data is sent. The function uip_mss() can be used to query
 580  * uIP for the amount of data that actually will be sent.
 581  *
 582  * \note This function does not guarantee that the sent data will
 583  * arrive at the destination. If the data is lost in the network, the
 584  * application will be invoked with the uip_rexmit() event being
 585  * set. The application will then have to resend the data using this
 586  * function.
 587  *
 588  * \param data A pointer to the data which is to be sent.
 589  *
 590  * \param len The maximum amount of data bytes to be sent.
 591  *
 592  * \hideinitializer
 593  */
 594 void uip_send(const void *data, int len);
 595
 596 /**
 597  * The length of any incoming data that is currently available (if available)
 598  * in the uip_appdata buffer.
 599  *
 600  * The test function uip_data() must first be used to check if there
 601  * is any data available at all.
 602  *
 603  * \hideinitializer
 604  */
 605 /*void uip_datalen(void);*/
 606 #define uip_datalen()       uip_len
 607
 608 /**
 609  * The length of any out-of-band data (urgent data) that has arrived
 610  * on the connection.
 611  *
 612  * \note The configuration parameter UIP_URGDATA must be set for this
 613  * function to be enabled.
 614  *
 615  * \hideinitializer
 616  */
 617 #define uip_urgdatalen()    uip_urglen
 618
 619 /**
 620  * Close the current connection.
 621  *
 622  * This function will close the current connection in a nice way.
 623  *
 624  * \hideinitializer
 625  */
 626 #define uip_close()         (uip_flags = UIP_CLOSE)
 627
 628 /**
 629  * Abort the current connection.
 630  *
 631  * This function will abort (reset) the current connection, and is
 632  * usually used when an error has occurred that prevents using the
 633  * uip_close() function.
 634  *
 635  * \hideinitializer
 636  */
 637 #define uip_abort()         (uip_flags = UIP_ABORT)
 638
 639 /**
 640  * Tell the sending host to stop sending data.
 641  *
 642  * This function will close our receiver's window so that we stop
 643  * receiving data for the current connection.
 644  *
 645  * \hideinitializer
 646  */
 647 #define uip_stop()          (uip_conn->tcpstateflags |= UIP_STOPPED)
 648
 649 /**
 650  * Find out if the current connection has been previously stopped with
 651  * uip_stop().
 652  *
 653  * \hideinitializer
 654  */
 655 #define uip_stopped(conn)   ((conn)->tcpstateflags & UIP_STOPPED)
 656
 657 /**
 658  * Restart the current connection, if is has previously been stopped
 659  * with uip_stop().
 660  *
 661  * This function will open the receiver's window again so that we
 662  * start receiving data for the current connection.
 663  *
 664  * \hideinitializer
 665  */
 666 #define uip_restart()         do { uip_flags |= UIP_NEWDATA;    \
 667     uip_conn->tcpstateflags &= ~UIP_STOPPED;                    \
 668   } while(0)
 669
 670
 671 /* uIP tests that can be made to determine in what state the current
 672    connection is, and what the application function should do. */
 673
 674 /**
 675  * Is the current connection a UDP connection?
 676  *
 677  * This function checks whether the current connection is a UDP connection.
 678  *
 679  * \hideinitializer
 680  *
 681  */
 682 #define uip_udpconnection() (uip_conn == NULL)
 683
 684 /**
 685  * Is new incoming data available?
 686  *
 687  * Will reduce to non-zero if there is new data for the application
 688  * present at the uip_appdata pointer. The size of the data is
 689  * available through the uip_len variable.
 690  *
 691  * \hideinitializer
 692  */
 693 #define uip_newdata()   (uip_flags & UIP_NEWDATA)
 694
 695 /**
 696  * Has previously sent data been acknowledged?
 697  *
 698  * Will reduce to non-zero if the previously sent data has been
 699  * acknowledged by the remote host. This means that the application
 700  * can send new data.
 701  *
 702  * \hideinitializer
 703  */
 704 #define uip_acked()   (uip_flags & UIP_ACKDATA)
 705
 706 /**
 707  * Has the connection just been connected?
 708  *
 709  * Reduces to non-zero if the current connection has been connected to
 710  * a remote host. This will happen both if the connection has been
 711  * actively opened (with uip_connect()) or passively opened (with
 712  * uip_listen()).
 713  *
 714  * \hideinitializer
 715  */
 716 #define uip_connected() (uip_flags & UIP_CONNECTED)
 717
 718 /**
 719  * Has the connection been closed by the other end?
 720  *
 721  * Is non-zero if the connection has been closed by the remote
 722  * host. The application may then do the necessary clean-ups.
 723  *
 724  * \hideinitializer
 725  */
 726 #define uip_closed()    (uip_flags & UIP_CLOSE)
 727
 728 /**
 729  * Has the connection been aborted by the other end?
 730  *
 731  * Non-zero if the current connection has been aborted (reset) by the
 732  * remote host.
 733  *
 734  * \hideinitializer
 735  */
 736 #define uip_aborted()    (uip_flags & UIP_ABORT)
 737
 738 /**
 739  * Has the connection timed out?
 740  *
 741  * Non-zero if the current connection has been aborted due to too many
 742  * retransmissions.
 743  *
 744  * \hideinitializer
 745  */
 746 #define uip_timedout()    (uip_flags & UIP_TIMEDOUT)
 747
 748 /**
 749  * Do we need to retransmit previously data?
 750  *
 751  * Reduces to non-zero if the previously sent data has been lost in
 752  * the network, and the application should retransmit it. The
 753  * application should send the exact same data as it did the last
 754  * time, using the uip_send() function.
 755  *
 756  * \hideinitializer
 757  */
 758 #define uip_rexmit()     (uip_flags & UIP_REXMIT)
 759
 760 /**
 761  * Is the connection being polled by uIP?
 762  *
 763  * Is non-zero if the reason the application is invoked is that the
 764  * current connection has been idle for a while and should be
 765  * polled.
 766  *
 767  * The polling event can be used for sending data without having to
 768  * wait for the remote host to send data.
 769  *
 770  * \hideinitializer
 771  */
 772 #define uip_poll()       (uip_flags & UIP_POLL)
 773
 774 /**
 775  * Get the initial maximum segment size (MSS) of the current
 776  * connection.
 777  *
 778  * \hideinitializer
 779  */
 780 #define uip_initialmss()             (uip_conn->initialmss)
 781
 782 /**
 783  * Get the current maximum segment size that can be sent on the current
 784  * connection.
 785  *
 786  * The current maximum segment size that can be sent on the
 787  * connection is computed from the receiver's window and the MSS of
 788  * the connection (which also is available by calling
 789  * uip_initialmss()).
 790  *
 791  * \hideinitializer
 792  */
 793 #define uip_mss()             (uip_conn->mss)
 794
 795 /**
 796  * Set up a new UDP connection.
 797  *
 798  * This function sets up a new UDP connection. The function will
 799  * automatically allocate an unused local port for the new
 800  * connection. However, another port can be chosen by using the
 801  * uip_udp_bind() call, after the uip_udp_new() function has been
 802  * called.
 803  *
 804  * Example:
 805  \code
 806  uip_ipaddr_t addr;
 807  struct uip_udp_conn *c;
 808
 809  uip_ipaddr(&addr, 192,168,2,1);
 810  c = uip_udp_new(&addr, HTONS(12345));
 811  if(c != NULL) {
 812  uip_udp_bind(c, HTONS(12344));
 813  }
 814  \endcode
 815  * \param ripaddr The IP address of the remote host.
 816  *
 817  * \param rport The remote port number in network byte order.
 818  *
 819  * \return The uip_udp_conn structure for the new connection or NULL
 820  * if no connection could be allocated.
 821  */
 822 struct uip_udp_conn *uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport);
 823
 824 /**
 825  * Removed a UDP connection.
 826  *
 827  * \param conn A pointer to the uip_udp_conn structure for the connection.
 828  *
 829  * \hideinitializer
 830  */
 831 #define uip_udp_remove(conn) (conn)->lport = 0
 832
 833 /**
 834  * Bind a UDP connection to a local port.
 835  *
 836  * \param conn A pointer to the uip_udp_conn structure for the
 837  * connection.
 838  *
 839  * \param port The local port number, in network byte order.
 840  *
 841  * \hideinitializer
 842  */
 843 #define uip_udp_bind(conn, port) (conn)->lport = port
 844
 845 /**
 846  * Send a UDP datagram of length len on the current connection.
 847  *
 848  * This function can only be called in response to a UDP event (poll
 849  * or newdata). The data must be present in the uip_buf buffer, at the
 850  * place pointed to by the uip_appdata pointer.
 851  *
 852  * \param len The length of the data in the uip_buf buffer.
 853  *
 854  * \hideinitializer
 855  */
 856 #define uip_udp_send(len) uip_send((char *)uip_appdata, len)
 857
 858 /** @} */
 859
 860 /* uIP convenience and converting functions. */
 861
 862 /**
 863  * \defgroup uipconvfunc uIP conversion functions
 864  * @{
 865  *
 866  * These functions can be used for converting between different data
 867  * formats used by uIP.
 868  */
 869
 870 /**
 871  * Convert an IP address to four bytes separated by commas.
 872  *
 873  * Example:
 874  \code
 875  uip_ipaddr_t ipaddr;
 876  printf("ipaddr=%d.%d.%d.%d\n", uip_ipaddr_to_quad(&ipaddr));
 877  \endcode
 878  *
 879  * \param a A pointer to a uip_ipaddr_t.
 880  * \hideinitializer
 881  */
 882 #define uip_ipaddr_to_quad(a) (a)->u8[0],(a)->u8[1],(a)->u8[2],(a)->u8[3]
 883
 884 /**
 885  * Construct an IP address from four bytes.
 886  *
 887  * This function constructs an IP address of the type that uIP handles
 888  * internally from four bytes. The function is handy for specifying IP
 889  * addresses to use with e.g. the uip_connect() function.
 890  *
 891  * Example:
 892  \code
 893  uip_ipaddr_t ipaddr;
 894  struct uip_conn *c;
 895
 896  uip_ipaddr(&ipaddr, 192,168,1,2);
 897  c = uip_connect(&ipaddr, HTONS(80));
 898  \endcode
 899  *
 900  * \param addr A pointer to a uip_ipaddr_t variable that will be
 901  * filled in with the IP address.
 902  *
 903  * \param addr0 The first octet of the IP address.
 904  * \param addr1 The second octet of the IP address.
 905  * \param addr2 The third octet of the IP address.
 906  * \param addr3 The forth octet of the IP address.
 907  *
 908  * \hideinitializer
 909  */
 910 #define uip_ipaddr(addr, addr0,addr1,addr2,addr3) do {  \
 911     (addr)->u8[0] = addr0;                              \
 912     (addr)->u8[1] = addr1;                              \
 913     (addr)->u8[2] = addr2;                              \
 914     (addr)->u8[3] = addr3;                              \
 915   } while(0)
 916
 917 /**
 918  * Construct an IPv6 address from eight 16-bit words.
 919  *
 920  * This function constructs an IPv6 address.
 921  *
 922  * \hideinitializer
 923  */
 924 #define uip_ip6addr(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7) do { \
 925     (addr)->u16[0] = HTONS(addr0);                                      \
 926     (addr)->u16[1] = HTONS(addr1);                                      \
 927     (addr)->u16[2] = HTONS(addr2);                                      \
 928     (addr)->u16[3] = HTONS(addr3);                                      \
 929     (addr)->u16[4] = HTONS(addr4);                                      \
 930     (addr)->u16[5] = HTONS(addr5);                                      \
 931     (addr)->u16[6] = HTONS(addr6);                                      \
 932     (addr)->u16[7] = HTONS(addr7);                                      \
 933   } while(0)
 934
 935 /**
 936  * Construct an IPv6 address from eight 8-bit words.
 937  *
 938  * This function constructs an IPv6 address.
 939  *
 940  * \hideinitializer
 941  */
 942 #define uip_ip6addr_u8(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7,addr8,addr9,addr10,addr11,addr12,addr13,addr14,addr15) do { \
 943     (addr)->u8[0] = addr0;                                       \
 944     (addr)->u8[1] = addr1;                                       \
 945     (addr)->u8[2] = addr2;                                       \
 946     (addr)->u8[3] = addr3;                                       \
 947     (addr)->u8[4] = addr4;                                       \
 948     (addr)->u8[5] = addr5;                                       \
 949     (addr)->u8[6] = addr6;                                       \
 950     (addr)->u8[7] = addr7;                                       \
 951     (addr)->u8[8] = addr8;                                       \
 952     (addr)->u8[9] = addr9;                                       \
 953     (addr)->u8[10] = addr10;                                     \
 954     (addr)->u8[11] = addr11;                                     \
 955     (addr)->u8[12] = addr12;                                     \
 956     (addr)->u8[13] = addr13;                                     \
 957     (addr)->u8[14] = addr14;                                     \
 958     (addr)->u8[15] = addr15;                                     \
 959   } while(0)
 960
 961
 962 /**
 963  * Copy an IP address to another IP address.
 964  *
 965  * Copies an IP address from one place to another.
 966  *
 967  * Example:
 968  \code
 969  uip_ipaddr_t ipaddr1, ipaddr2;
 970
 971  uip_ipaddr(&ipaddr1, 192,16,1,2);
 972  uip_ipaddr_copy(&ipaddr2, &ipaddr1);
 973  \endcode
 974  *
 975  * \param dest The destination for the copy.
 976  * \param src The source from where to copy.
 977  *
 978  * \hideinitializer
 979  */
 980 #ifndef uip_ipaddr_copy
 981 #define uip_ipaddr_copy(dest, src) (*(dest) = *(src))
 982 #endif
 983
 984 /**
 985  * Compare two IP addresses
 986  *
 987  * Compares two IP addresses.
 988  *
 989  * Example:
 990  \code
 991  uip_ipaddr_t ipaddr1, ipaddr2;
 992
 993  uip_ipaddr(&ipaddr1, 192,16,1,2);
 994  if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) {
 995  printf("They are the same");
 996  }
 997  \endcode
 998  *
 999  * \param addr1 The first IP address.
1000  * \param addr2 The second IP address.
1001  *
1002  * \hideinitializer
1003  */
1004 #if !UIP_CONF_IPV6
1005 #define uip_ipaddr_cmp(addr1, addr2) ((addr1)->u16[0] == (addr2)->u16[0] && \
1006                                       (addr1)->u16[1] == (addr2)->u16[1])
1007 #else /* !UIP_CONF_IPV6 */
1008 #define uip_ipaddr_cmp(addr1, addr2) (memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0)
1009 #endif /* !UIP_CONF_IPV6 */
1010
1011 /**
1012  * Compare two IP addresses with netmasks
1013  *
1014  * Compares two IP addresses with netmasks. The masks are used to mask
1015  * out the bits that are to be compared.
1016  *
1017  * Example:
1018  \code
1019  uip_ipaddr_t ipaddr1, ipaddr2, mask;
1020
1021  uip_ipaddr(&mask, 255,255,255,0);
1022  uip_ipaddr(&ipaddr1, 192,16,1,2);
1023  uip_ipaddr(&ipaddr2, 192,16,1,3);
1024  if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) {
1025  printf("They are the same");
1026  }
1027  \endcode
1028  *
1029  * \param addr1 The first IP address.
1030  * \param addr2 The second IP address.
1031  * \param mask The netmask.
1032  *
1033  * \hideinitializer
1034  */
1035 #if !UIP_CONF_IPV6
1036 #define uip_ipaddr_maskcmp(addr1, addr2, mask)          \
1037   (((((u16_t *)addr1)[0] & ((u16_t *)mask)[0]) ==       \
1038     (((u16_t *)addr2)[0] & ((u16_t *)mask)[0])) &&      \
1039    ((((u16_t *)addr1)[1] & ((u16_t *)mask)[1]) ==       \
1040     (((u16_t *)addr2)[1] & ((u16_t *)mask)[1])))
1041 #else
1042 #define uip_ipaddr_prefixcmp(addr1, addr2, length) (memcmp(addr1, addr2, length>>3) == 0)
1043 #endif
1044
1045
1046 /**
1047  * Check if an address is a broadcast address for a network.
1048  *
1049  * Checks if an address is the broadcast address for a network. The
1050  * network is defined by an IP address that is on the network and the
1051  * network's netmask.
1052  *
1053  * \param addr The IP address.
1054  * \param netaddr The network's IP address.
1055  * \param netmask The network's netmask.
1056  *
1057  * \hideinitializer
1058  */
1059 /*#define uip_ipaddr_isbroadcast(addr, netaddr, netmask)
1060   ((uip_ipaddr_t *)(addr)).u16 & ((uip_ipaddr_t *)(addr)).u16*/
1061
1062
1063
1064 /**
1065  * Mask out the network part of an IP address.
1066  *
1067  * Masks out the network part of an IP address, given the address and
1068  * the netmask.
1069  *
1070  * Example:
1071  \code
1072  uip_ipaddr_t ipaddr1, ipaddr2, netmask;
1073
1074  uip_ipaddr(&ipaddr1, 192,16,1,2);
1075  uip_ipaddr(&netmask, 255,255,255,0);
1076  uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask);
1077  \endcode
1078  *
1079  * In the example above, the variable "ipaddr2" will contain the IP
1080  * address 192.168.1.0.
1081  *
1082  * \param dest Where the result is to be placed.
1083  * \param src The IP address.
1084  * \param mask The netmask.
1085  *
1086  * \hideinitializer
1087  */
1088 #define uip_ipaddr_mask(dest, src, mask) do {                           \
1089     ((u16_t *)dest)[0] = ((u16_t *)src)[0] & ((u16_t *)mask)[0];        \
1090     ((u16_t *)dest)[1] = ((u16_t *)src)[1] & ((u16_t *)mask)[1];        \
1091   } while(0)
1092
1093 /**
1094  * Pick the first octet of an IP address.
1095  *
1096  * Picks out the first octet of an IP address.
1097  *
1098  * Example:
1099  \code
1100  uip_ipaddr_t ipaddr;
1101  u8_t octet;
1102
1103  uip_ipaddr(&ipaddr, 1,2,3,4);
1104  octet = uip_ipaddr1(&ipaddr);
1105  \endcode
1106  *
1107  * In the example above, the variable "octet" will contain the value 1.
1108  *
1109  * \hideinitializer
1110  */
1111 #define uip_ipaddr1(addr) ((addr)->u8[0])
1112
1113 /**
1114  * Pick the second octet of an IP address.
1115  *
1116  * Picks out the second octet of an IP address.
1117  *
1118  * Example:
1119  \code
1120  uip_ipaddr_t ipaddr;
1121  u8_t octet;
1122
1123  uip_ipaddr(&ipaddr, 1,2,3,4);
1124  octet = uip_ipaddr2(&ipaddr);
1125  \endcode
1126  *
1127  * In the example above, the variable "octet" will contain the value 2.
1128  *
1129  * \hideinitializer
1130  */
1131 #define uip_ipaddr2(addr) ((addr)->u8[1])
1132
1133 /**
1134  * Pick the third octet of an IP address.
1135  *
1136  * Picks out the third octet of an IP address.
1137  *
1138  * Example:
1139  \code
1140  uip_ipaddr_t ipaddr;
1141  u8_t octet;
1142
1143  uip_ipaddr(&ipaddr, 1,2,3,4);
1144  octet = uip_ipaddr3(&ipaddr);
1145  \endcode
1146  *
1147  * In the example above, the variable "octet" will contain the value 3.
1148  *
1149  * \hideinitializer
1150  */
1151 #define uip_ipaddr3(addr) ((addr)->u8[2])
1152
1153 /**
1154  * Pick the fourth octet of an IP address.
1155  *
1156  * Picks out the fourth octet of an IP address.
1157  *
1158  * Example:
1159  \code
1160  uip_ipaddr_t ipaddr;
1161  u8_t octet;
1162
1163  uip_ipaddr(&ipaddr, 1,2,3,4);
1164  octet = uip_ipaddr4(&ipaddr);
1165  \endcode
1166  *
1167  * In the example above, the variable "octet" will contain the value 4.
1168  *
1169  * \hideinitializer
1170  */
1171 #define uip_ipaddr4(addr) ((addr)->u8[3])
1172
1173 /**
1174  * Convert 16-bit quantity from host byte order to network byte order.
1175  *
1176  * This macro is primarily used for converting constants from host
1177  * byte order to network byte order. For converting variables to
1178  * network byte order, use the htons() function instead.
1179  *
1180  * \hideinitializer
1181  */
1182 #ifndef HTONS
1183 #   if UIP_BYTE_ORDER == UIP_BIG_ENDIAN
1184 #      define HTONS(n) (n)
1185 #      define HTONL(n) (n)
1186 #   else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
1187 #      define HTONS(n) (u16_t)((((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8))
1188 #      define HTONL(n) (((u32_t)HTONS(n) << 16) | HTONS((u32_t)(n) >> 16))
1189 #   endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
1190 #else
1191 #error "HTONS already defined!"
1192 #endif /* HTONS */
1193
1194 /**
1195  * Convert 16-bit quantity from host byte order to network byte order.
1196  *
1197  * This function is primarily used for converting variables from host
1198  * byte order to network byte order. For converting constants to
1199  * network byte order, use the HTONS() macro instead.
1200  */
1201 #ifndef htons
1202 u16_t htons(u16_t val);
1203 #endif /* htons */
1204 #ifndef ntohs
1205 #define ntohs htons
1206 #endif
1207
1208 #ifndef htonl
1209 u32_t htonl(u32_t val);
1210 #endif /* htonl */
1211 #ifndef ntohl
1212 #define ntohl htonl
1213 #endif
1214
1215 /** @} */
1216
1217 /**
1218  * Pointer to the application data in the packet buffer.
1219  *
1220  * This pointer points to the application data when the application is
1221  * called. If the application wishes to send data, the application may
1222  * use this space to write the data into before calling uip_send().
1223  */
1224 extern void *uip_appdata;
1225
1226 #if UIP_URGDATA > 0
1227 /* u8_t *uip_urgdata:
1228  *
1229  * This pointer points to any urgent data that has been received. Only
1230  * present if compiled with support for urgent data (UIP_URGDATA).
1231  */
1232 extern void *uip_urgdata;
1233 #endif /* UIP_URGDATA > 0 */
1234
1235
1236 /**
1237  * \defgroup uipdrivervars Variables used in uIP device drivers
1238  * @{
1239  *
1240  * uIP has a few global variables that are used in device drivers for
1241  * uIP.
1242  */
1243
1244 /**
1245  * The length of the packet in the uip_buf buffer.
1246  *
1247  * The global variable uip_len holds the length of the packet in the
1248  * uip_buf buffer.
1249  *
1250  * When the network device driver calls the uIP input function,
1251  * uip_len should be set to the length of the packet in the uip_buf
1252  * buffer.
1253  *
1254  * When sending packets, the device driver should use the contents of
1255  * the uip_len variable to determine the length of the outgoing
1256  * packet.
1257  *
1258  */
1259 extern u16_t uip_len;
1260
1261 /**
1262  * The length of the extension headers
1263  */
1264 extern u8_t uip_ext_len;
1265 /** @} */
1266
1267 #if UIP_URGDATA > 0
1268 extern u16_t uip_urglen, uip_surglen;
1269 #endif /* UIP_URGDATA > 0 */
1270
1271
1272 /**
1273  * Representation of a uIP TCP connection.
1274  *
1275  * The uip_conn structure is used for identifying a connection. All
1276  * but one field in the structure are to be considered read-only by an
1277  * application. The only exception is the appstate field whose purpose
1278  * is to let the application store application-specific state (e.g.,
1279  * file pointers) for the connection. The type of this field is
1280  * configured in the "uipopt.h" header file.
1281  */
1282 struct uip_conn {
1283   uip_ipaddr_t ripaddr;   /**< The IP address of the remote host. */
1284
1285   u16_t lport;        /**< The local TCP port, in network byte order. */
1286   u16_t rport;        /**< The local remote TCP port, in network byte
1287                          order. */
1288
1289   u8_t rcv_nxt[4];    /**< The sequence number that we expect to
1290                          receive next. */
1291   u8_t snd_nxt[4];    /**< The sequence number that was last sent by
1292                          us. */
1293   u16_t len;          /**< Length of the data that was previously sent. */
1294   u16_t mss;          /**< Current maximum segment size for the
1295                          connection. */
1296   u16_t initialmss;   /**< Initial maximum segment size for the
1297                          connection. */
1298   u8_t sa;            /**< Retransmission time-out calculation state
1299                          variable. */
1300   u8_t sv;            /**< Retransmission time-out calculation state
1301                          variable. */
1302   u8_t rto;           /**< Retransmission time-out. */
1303   u8_t tcpstateflags; /**< TCP state and flags. */
1304   u8_t timer;         /**< The retransmission timer. */
1305   u8_t nrtx;          /**< The number of retransmissions for the last
1306                          segment sent. */
1307
1308   /** The application state. */
1309   uip_tcp_appstate_t appstate;
1310 };
1311
1312
1313 /**
1314  * Pointer to the current TCP connection.
1315  *
1316  * The uip_conn pointer can be used to access the current TCP
1317  * connection.
1318  */
1319
1320 extern struct uip_conn *uip_conn;
1321 #if UIP_TCP
1322 /* The array containing all uIP connections. */
1323 extern struct uip_conn uip_conns[UIP_CONNS];
1324 #endif
1325
1326 /**
1327  * \addtogroup uiparch
1328  * @{
1329  */
1330
1331 /**
1332  * 4-byte array used for the 32-bit sequence number calculations.
1333  */
1334 extern u8_t uip_acc32[4];
1335 /** @} */
1336
1337 /**
1338  * Representation of a uIP UDP connection.
1339  */
1340 struct uip_udp_conn {
1341   uip_ipaddr_t ripaddr;   /**< The IP address of the remote peer. */
1342   u16_t lport;        /**< The local port number in network byte order. */
1343   u16_t rport;        /**< The remote port number in network byte order. */
1344   u8_t  ttl;          /**< Default time-to-live. */
1345
1346   /** The application state. */
1347   uip_udp_appstate_t appstate;
1348 };
1349
1350 /**
1351  * The current UDP connection.
1352  */
1353 extern struct uip_udp_conn *uip_udp_conn;
1354 extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
1355
1356 struct uip_router {
1357   int (*activate)(void);
1358   int (*deactivate)(void);
1359   uip_ipaddr_t *(*lookup)(uip_ipaddr_t *destipaddr, uip_ipaddr_t *nexthop);
1360 };
1361
1362 #if UIP_CONF_ROUTER
1363 extern const struct uip_router *uip_router;
1364
1365 /**
1366  * uIP routing driver registration function.
1367  */
1368 void uip_router_register(const struct uip_router *router);
1369 #endif /*UIP_CONF_ROUTER*/
1370
1371 #if UIP_CONF_ICMP6
1372 struct uip_icmp6_conn {
1373   uip_icmp6_appstate_t appstate;
1374 };
1375 extern struct uip_icmp6_conn uip_icmp6_conns;
1376 #endif /*UIP_CONF_ICMP6*/
1377
1378 /**
1379  * The uIP TCP/IP statistics.
1380  *
1381  * This is the variable in which the uIP TCP/IP statistics are gathered.
1382  */
1383 #if UIP_STATISTICS == 1
1384 extern struct uip_stats uip_stat;
1385 #define UIP_STAT(s) s
1386 #else
1387 #define UIP_STAT(s)
1388 #endif /* UIP_STATISTICS == 1 */
1389
1390 /**
1391  * The structure holding the TCP/IP statistics that are gathered if
1392  * UIP_STATISTICS is set to 1.
1393  *
1394  */
1395 struct uip_stats {
1396   struct {
1397     uip_stats_t recv;     /**< Number of received packets at the IP
1398                              layer. */
1399     uip_stats_t sent;     /**< Number of sent packets at the IP
1400                              layer. */
1401     uip_stats_t forwarded;/**< Number of forwarded packets at the IP
1402                              layer. */
1403     uip_stats_t drop;     /**< Number of dropped packets at the IP
1404                              layer. */
1405     uip_stats_t vhlerr;   /**< Number of packets dropped due to wrong
1406                              IP version or header length. */
1407     uip_stats_t hblenerr; /**< Number of packets dropped due to wrong
1408                              IP length, high byte. */
1409     uip_stats_t lblenerr; /**< Number of packets dropped due to wrong
1410                              IP length, low byte. */
1411     uip_stats_t fragerr;  /**< Number of packets dropped since they
1412                              were IP fragments. */
1413     uip_stats_t chkerr;   /**< Number of packets dropped due to IP
1414                              checksum errors. */
1415     uip_stats_t protoerr; /**< Number of packets dropped since they
1416                              were neither ICMP, UDP nor TCP. */
1417   } ip;                   /**< IP statistics. */
1418   struct {
1419     uip_stats_t recv;     /**< Number of received ICMP packets. */
1420     uip_stats_t sent;     /**< Number of sent ICMP packets. */
1421     uip_stats_t drop;     /**< Number of dropped ICMP packets. */
1422     uip_stats_t typeerr;  /**< Number of ICMP packets with a wrong
1423                              type. */
1424     uip_stats_t chkerr;   /**< Number of ICMP packets with a bad
1425                              checksum. */
1426   } icmp;                 /**< ICMP statistics. */
1427 #if UIP_TCP
1428   struct {
1429     uip_stats_t recv;     /**< Number of received TCP segments. */
1430     uip_stats_t sent;     /**< Number of sent TCP segments. */
1431     uip_stats_t drop;     /**< Number of dropped TCP segments. */
1432     uip_stats_t chkerr;   /**< Number of TCP segments with a bad
1433                              checksum. */
1434     uip_stats_t ackerr;   /**< Number of TCP segments with a bad ACK
1435                              number. */
1436     uip_stats_t rst;      /**< Number of received TCP RST (reset) segments. */
1437     uip_stats_t rexmit;   /**< Number of retransmitted TCP segments. */
1438     uip_stats_t syndrop;  /**< Number of dropped SYNs due to too few
1439                              connections was available. */
1440     uip_stats_t synrst;   /**< Number of SYNs for closed ports,
1441                              triggering a RST. */
1442   } tcp;                  /**< TCP statistics. */
1443 #endif
1444 #if UIP_UDP
1445   struct {
1446     uip_stats_t drop;     /**< Number of dropped UDP segments. */
1447     uip_stats_t recv;     /**< Number of received UDP segments. */
1448     uip_stats_t sent;     /**< Number of sent UDP segments. */
1449     uip_stats_t chkerr;   /**< Number of UDP segments with a bad
1450                              checksum. */
1451   } udp;                  /**< UDP statistics. */
1452 #endif /* UIP_UDP */
1453 #if UIP_CONF_IPV6
1454   struct {
1455     uip_stats_t drop;     /**< Number of dropped ND6 packets. */
1456     uip_stats_t recv;     /**< Number of received ND6 packets */
1457     uip_stats_t sent;     /**< Number of sent ND6 packets */
1458   } nd6;
1459 #endif /*UIP_CONF_IPV6*/
1460 };
1461
1462
1463 /*---------------------------------------------------------------------------*/
1464 /* All the stuff below this point is internal to uIP and should not be
1465  * used directly by an application or by a device driver.
1466  */
1467 /*---------------------------------------------------------------------------*/
1468
1469
1470
1471 /* u8_t uip_flags:
1472  *
1473  * When the application is called, uip_flags will contain the flags
1474  * that are defined in this file. Please read below for more
1475  * information.
1476  */
1477 extern u8_t uip_flags;
1478
1479 /* The following flags may be set in the global variable uip_flags
1480    before calling the application callback. The UIP_ACKDATA,
1481    UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time,
1482    whereas the others are mutually exclusive. Note that these flags
1483    should *NOT* be accessed directly, but only through the uIP
1484    functions/macros. */
1485
1486 #define UIP_ACKDATA   1     /* Signifies that the outstanding data was
1487                                acked and the application should send
1488                                out new data instead of retransmitting
1489                                the last data. */
1490 #define UIP_NEWDATA   2     /* Flags the fact that the peer has sent
1491                                us new data. */
1492 #define UIP_REXMIT    4     /* Tells the application to retransmit the
1493                                data that was last sent. */
1494 #define UIP_POLL      8     /* Used for polling the application, to
1495                                check if the application has data that
1496                                it wants to send. */
1497 #define UIP_CLOSE     16    /* The remote host has closed the
1498                                connection, thus the connection has
1499                                gone away. Or the application signals
1500                                that it wants to close the
1501                                connection. */
1502 #define UIP_ABORT     32    /* The remote host has aborted the
1503                                connection, thus the connection has
1504                                gone away. Or the application signals
1505                                that it wants to abort the
1506                                connection. */
1507 #define UIP_CONNECTED 64    /* We have got a connection from a remote
1508                                host and have set up a new connection
1509                                for it, or an active connection has
1510                                been successfully established. */
1511
1512 #define UIP_TIMEDOUT  128   /* The connection has been aborted due to
1513                                too many retransmissions. */
1514
1515
1516 /**
1517  * \brief process the options within a hop by hop or destination option header
1518  * \retval 0: nothing to send,
1519  * \retval 1: drop pkt
1520  * \retval 2: ICMP error message to send
1521 */
1522 /*static u8_t
1523 uip_ext_hdr_options_process(); */
1524
1525 /* uip_process(flag):
1526  *
1527  * The actual uIP function which does all the work.
1528  */
1529 void uip_process(u8_t flag);
1530
1531   /* The following flags are passed as an argument to the uip_process()
1532    function. They are used to distinguish between the two cases where
1533    uip_process() is called. It can be called either because we have
1534    incoming data that should be processed, or because the periodic
1535    timer has fired. These values are never used directly, but only in
1536    the macros defined in this file. */
1537
1538 #define UIP_DATA          1     /* Tells uIP that there is incoming
1539                                    data in the uip_buf buffer. The
1540                                    length of the data is stored in the
1541                                    global variable uip_len. */
1542 #define UIP_TIMER         2     /* Tells uIP that the periodic timer
1543                                    has fired. */
1544 #define UIP_POLL_REQUEST  3     /* Tells uIP that a connection should
1545                                    be polled. */
1546 #define UIP_UDP_SEND_CONN 4     /* Tells uIP that a UDP datagram
1547                                    should be constructed in the
1548                                    uip_buf buffer. */
1549 #if UIP_UDP
1550 #define UIP_UDP_TIMER     5
1551 #endif /* UIP_UDP */
1552
1553 /* The TCP states used in the uip_conn->tcpstateflags. */
1554 #define UIP_CLOSED      0
1555 #define UIP_SYN_RCVD    1
1556 #define UIP_SYN_SENT    2
1557 #define UIP_ESTABLISHED 3
1558 #define UIP_FIN_WAIT_1  4
1559 #define UIP_FIN_WAIT_2  5
1560 #define UIP_CLOSING     6
1561 #define UIP_TIME_WAIT   7
1562 #define UIP_LAST_ACK    8
1563 #define UIP_TS_MASK     15
1564
1565 #define UIP_STOPPED      16
1566
1567 /* The TCP and IP headers. */
1568 struct uip_tcpip_hdr {
1569 #if UIP_CONF_IPV6
1570   /* IPv6 header. */
1571   u8_t vtc,
1572     tcflow;
1573   u16_t flow;
1574   u8_t len[2];
1575   u8_t proto, ttl;
1576   uip_ip6addr_t srcipaddr, destipaddr;
1577 #else /* UIP_CONF_IPV6 */
1578   /* IPv4 header. */
1579   u8_t vhl,
1580     tos,
1581     len[2],
1582     ipid[2],
1583     ipoffset[2],
1584     ttl,
1585     proto;
1586   u16_t ipchksum;
1587   uip_ipaddr_t srcipaddr, destipaddr;
1588 #endif /* UIP_CONF_IPV6 */
1589
1590   /* TCP header. */
1591   u16_t srcport,
1592     destport;
1593   u8_t seqno[4],
1594     ackno[4],
1595     tcpoffset,
1596     flags,
1597     wnd[2];
1598   u16_t tcpchksum;
1599   u8_t urgp[2];
1600   u8_t optdata[4];
1601 };
1602
1603 /* The ICMP and IP headers. */
1604 struct uip_icmpip_hdr {
1605 #if UIP_CONF_IPV6
1606   /* IPv6 header. */
1607   u8_t vtc,
1608     tcf;
1609   u16_t flow;
1610   u8_t len[2];
1611   u8_t proto, ttl;
1612   uip_ip6addr_t srcipaddr, destipaddr;
1613 #else /* UIP_CONF_IPV6 */
1614   /* IPv4 header. */
1615   u8_t vhl,
1616     tos,
1617     len[2],
1618     ipid[2],
1619     ipoffset[2],
1620     ttl,
1621     proto;
1622   u16_t ipchksum;
1623   uip_ipaddr_t srcipaddr, destipaddr;
1624 #endif /* UIP_CONF_IPV6 */
1625
1626   /* ICMP header. */
1627   u8_t type, icode;
1628   u16_t icmpchksum;
1629 #if !UIP_CONF_IPV6
1630   u16_t id, seqno;
1631   u8_t payload[1];
1632 #endif /* !UIP_CONF_IPV6 */
1633 };
1634
1635
1636 /* The UDP and IP headers. */
1637 struct uip_udpip_hdr {
1638 #if UIP_CONF_IPV6
1639   /* IPv6 header. */
1640   u8_t vtc,
1641     tcf;
1642   u16_t flow;
1643   u8_t len[2];
1644   u8_t proto, ttl;
1645   uip_ip6addr_t srcipaddr, destipaddr;
1646 #else /* UIP_CONF_IPV6 */
1647   /* IP header. */
1648   u8_t vhl,
1649     tos,
1650     len[2],
1651     ipid[2],
1652     ipoffset[2],
1653     ttl,
1654     proto;
1655   u16_t ipchksum;
1656   uip_ipaddr_t srcipaddr, destipaddr;
1657 #endif /* UIP_CONF_IPV6 */
1658
1659   /* UDP header. */
1660   u16_t srcport,
1661     destport;
1662   u16_t udplen;
1663   u16_t udpchksum;
1664 };
1665
1666 /*
1667  * In IPv6 the length of the L3 headers before the transport header is
1668  * not fixed, due to the possibility to include extension option headers
1669  * after the IP header. hence we split here L3 and L4 headers
1670  */
1671 /* The IP header */
1672 struct uip_ip_hdr {
1673 #if UIP_CONF_IPV6
1674   /* IPV6 header */
1675   u8_t vtc;
1676   u8_t tcflow;
1677   u16_t flow;
1678   u8_t len[2];
1679   u8_t proto, ttl;
1680   uip_ip6addr_t srcipaddr, destipaddr;
1681 #else /* UIP_CONF_IPV6 */
1682   /* IPV4 header */
1683   u8_t vhl,
1684     tos,
1685     len[2],
1686     ipid[2],
1687     ipoffset[2],
1688     ttl,
1689     proto;
1690   u16_t ipchksum;
1691   uip_ipaddr_t srcipaddr, destipaddr;
1692 #endif /* UIP_CONF_IPV6 */
1693 };
1694
1695
1696 /*
1697  * IPv6 extension option headers: we are able to process
1698  * the 4 extension headers defined in RFC2460 (IPv6):
1699  * - Hop by hop option header, destination option header:
1700  *   These two are not used by any core IPv6 protocol, hence
1701  *   we just read them and go to the next. They convey options,
1702  *   the options defined in RFC2460 are Pad1 and PadN, which do
1703  *   some padding, and that we do not need to read (the length
1704  *   field in the header is enough)
1705  * - Routing header: this one is most notably used by MIPv6,
1706  *   which we do not implement, hence we just read it and go
1707  *   to the next
1708  * - Fragmentation header: we read this header and are able to
1709  *   reassemble packets
1710  *
1711  * We do not offer any means to send packets with extension headers
1712  *
1713  * We do not implement Authentication and ESP headers, which are
1714  * used in IPSec and defined in RFC4302,4303,4305,4385
1715  */
1716 /* common header part */
1717 struct uip_ext_hdr {
1718   u8_t next;
1719   u8_t len;
1720 };
1721
1722 /* Hop by Hop option header */
1723 struct uip_hbho_hdr {
1724   u8_t next;
1725   u8_t len;
1726 };
1727
1728 /* destination option header */
1729 struct uip_desto_hdr {
1730   u8_t next;
1731   u8_t len;
1732 };
1733
1734 /* We do not define structures for PAD1 and PADN options */
1735
1736 /*
1737  * routing header
1738  * the routing header as 4 common bytes, then routing header type
1739  * specific data there are several types of routing header. Type 0 was
1740  * deprecated as per RFC5095 most notable other type is 2, used in
1741  * RFC3775 (MIPv6) here we do not implement MIPv6, so we just need to
1742  * parse the 4 first bytes
1743  */
1744 struct uip_routing_hdr {
1745   u8_t next;
1746   u8_t len;
1747   u8_t routing_type;
1748   u8_t seg_left;
1749 };
1750
1751 /* fragmentation header */
1752 struct uip_frag_hdr {
1753   u8_t next;
1754   u8_t res;
1755   u16_t offsetresmore;
1756   u32_t id;
1757 };
1758
1759 /*
1760  * an option within the destination or hop by hop option headers
1761  * it contains type an length, which is true for all options but PAD1
1762  */
1763 struct uip_ext_hdr_opt {
1764   u8_t type;
1765   u8_t len;
1766 };
1767
1768 /* PADN option */
1769 struct uip_ext_hdr_opt_padn {
1770   u8_t opt_type;
1771   u8_t opt_len;
1772 };
1773
1774 /* TCP header */
1775 struct uip_tcp_hdr {
1776   u16_t srcport;
1777   u16_t destport;
1778   u8_t seqno[4];
1779   u8_t ackno[4];
1780   u8_t tcpoffset;
1781   u8_t flags;
1782   u8_t  wnd[2];
1783   u16_t tcpchksum;
1784   u8_t urgp[2];
1785   u8_t optdata[4];
1786 };
1787
1788 /* The ICMP headers. */
1789 struct uip_icmp_hdr {
1790   u8_t type, icode;
1791   u16_t icmpchksum;
1792 #if !UIP_CONF_IPV6
1793   u16_t id, seqno;
1794 #endif /* !UIP_CONF_IPV6 */
1795 };
1796
1797
1798 /* The UDP headers. */
1799 struct uip_udp_hdr {
1800   u16_t srcport;
1801   u16_t destport;
1802   u16_t udplen;
1803   u16_t udpchksum;
1804 };
1805
1806
1807 /**
1808  * The buffer size available for user data in the \ref uip_buf buffer.
1809  *
1810  * This macro holds the available size for user data in the \ref
1811  * uip_buf buffer. The macro is intended to be used for checking
1812  * bounds of available user data.
1813  *
1814  * Example:
1815  \code
1816  snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i);
1817  \endcode
1818  *
1819  * \hideinitializer
1820  */
1821 #define UIP_APPDATA_SIZE (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
1822 #define UIP_APPDATA_PTR (void *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]
1823
1824 #define UIP_PROTO_ICMP  1
1825 #define UIP_PROTO_TCP   6
1826 #define UIP_PROTO_UDP   17
1827 #define UIP_PROTO_ICMP6 58
1828
1829
1830 #if UIP_CONF_IPV6
1831 /** @{ */
1832 /** \brief  extension headers types */
1833 #define UIP_PROTO_HBHO        0
1834 #define UIP_PROTO_DESTO       60
1835 #define UIP_PROTO_ROUTING     43
1836 #define UIP_PROTO_FRAG        44
1837 #define UIP_PROTO_NONE        59
1838 /** @} */
1839
1840 /** @{ */
1841 /** \brief  Destination and Hop By Hop extension headers option types */
1842 #define UIP_EXT_HDR_OPT_PAD1  0
1843 #define UIP_EXT_HDR_OPT_PADN  1
1844 /** @} */
1845
1846 /** @{ */
1847 /**
1848  * \brief Bitmaps for extension header processing
1849  *
1850  * When processing extension headers, we should record somehow which one we
1851  * see, because you cannot have twice the same header, except for destination
1852  * We store all this in one u8_t bitmap one bit for each header expected. The
1853  * order in the bitmap is the order recommended in RFC2460
1854  */
1855 #define UIP_EXT_HDR_BITMAP_HBHO 0x01
1856 #define UIP_EXT_HDR_BITMAP_DESTO1 0x02
1857 #define UIP_EXT_HDR_BITMAP_ROUTING 0x04
1858 #define UIP_EXT_HDR_BITMAP_FRAG 0x08
1859 #define UIP_EXT_HDR_BITMAP_AH 0x10
1860 #define UIP_EXT_HDR_BITMAP_ESP 0x20
1861 #define UIP_EXT_HDR_BITMAP_DESTO2 0x40
1862 /** @} */
1863
1864
1865 #endif /* UIP_CONF_IPV6 */
1866
1867
1868 /* Header sizes. */
1869 #if UIP_CONF_IPV6
1870 #define UIP_IPH_LEN    40
1871 #define UIP_FRAGH_LEN  8
1872 #else /* UIP_CONF_IPV6 */
1873 #define UIP_IPH_LEN    20    /* Size of IP header */
1874 #endif /* UIP_CONF_IPV6 */
1875
1876 #define UIP_UDPH_LEN    8    /* Size of UDP header */
1877 #define UIP_TCPH_LEN   20    /* Size of TCP header */
1878 #ifdef UIP_IPH_LEN
1879 #define UIP_ICMPH_LEN   4    /* Size of ICMP header */
1880 #endif
1881 #define UIP_IPUDPH_LEN (UIP_UDPH_LEN + UIP_IPH_LEN)    /* Size of IP +
1882                         * UDP
1883                                                            * header */
1884 #define UIP_IPTCPH_LEN (UIP_TCPH_LEN + UIP_IPH_LEN)    /* Size of IP +
1885                                                            * TCP
1886                                                            * header */
1887 #define UIP_TCPIP_HLEN UIP_IPTCPH_LEN
1888 #define UIP_IPICMPH_LEN (UIP_IPH_LEN + UIP_ICMPH_LEN) /* size of ICMP
1889                                                          + IP header */
1890 #define UIP_LLIPH_LEN (UIP_LLH_LEN + UIP_IPH_LEN)    /* size of L2
1891                                                         + IP header */
1892 #if UIP_CONF_IPV6
1893 /**
1894  * The sums below are quite used in ND. When used for uip_buf, we
1895  * include link layer length when used for uip_len, we do not, hence
1896  * we need values with and without LLH_LEN we do not use capital
1897  * letters as these values are variable
1898  */
1899 #define uip_l2_l3_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len)
1900 #define uip_l2_l3_icmp_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN)
1901 #define uip_l3_hdr_len (UIP_IPH_LEN + uip_ext_len)
1902 #define uip_l3_icmp_hdr_len (UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN)
1903 #endif /*UIP_CONF_IPV6*/
1904
1905
1906 #if UIP_FIXEDADDR
1907 extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
1908 #else /* UIP_FIXEDADDR */
1909 extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
1910 #endif /* UIP_FIXEDADDR */
1911 extern const uip_ipaddr_t uip_broadcast_addr;
1912 extern const uip_ipaddr_t uip_all_zeroes_addr;
1913
1914 #if UIP_FIXEDETHADDR
1915 extern const uip_lladdr_t uip_lladdr;
1916 #else
1917 extern uip_lladdr_t uip_lladdr;
1918 #endif
1919
1920
1921
1922
1923 #ifdef UIP_CONF_IPV6
1924 /**
1925  * \brief Is IPv6 address a the unspecified address
1926  * a is of type uip_ipaddr_t
1927  */
1928 #define uip_is_addr_unspecified(a)               \
1929   ((((a)->u16[0]) == 0) &&                       \
1930    (((a)->u16[1]) == 0) &&                       \
1931    (((a)->u16[2]) == 0) &&                       \
1932    (((a)->u16[3]) == 0) &&                       \
1933    (((a)->u16[4]) == 0) &&                       \
1934    (((a)->u16[5]) == 0) &&                       \
1935    (((a)->u16[6]) == 0) &&                       \
1936    (((a)->u16[7]) == 0))
1937
1938 /** \brief Is IPv6 address a the link local all-nodes multicast address */
1939 #define uip_is_addr_linklocal_allnodes_mcast(a)     \
1940   ((((a)->u8[0]) == 0xff) &&                        \
1941    (((a)->u8[1]) == 0x02) &&                        \
1942    (((a)->u16[1]) == 0) &&                          \
1943    (((a)->u16[2]) == 0) &&                          \
1944    (((a)->u16[3]) == 0) &&                          \
1945    (((a)->u16[4]) == 0) &&                          \
1946    (((a)->u16[5]) == 0) &&                          \
1947    (((a)->u16[6]) == 0) &&                          \
1948    (((a)->u8[14]) == 0) &&                          \
1949    (((a)->u8[15]) == 0x01))
1950
1951 /** \brief set IP address a to unspecified */
1952 #define uip_create_unspecified(a) uip_ip6addr(a, 0, 0, 0, 0, 0, 0, 0, 0)
1953
1954 /** \brief set IP address a to the link local all-nodes multicast address */
1955 #define uip_create_linklocal_allnodes_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001)
1956
1957 /** \brief set IP address a to the link local all-routers multicast address */
1958 #define uip_create_linklocal_allrouters_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0002)
1959
1960 /**
1961  * \brief  is addr (a) a solicited node multicast address, see RFC3513
1962  *  a is of type uip_ipaddr_t*
1963  */
1964 #define uip_is_addr_solicited_node(a)           \
1965   ((((a)->u8[0]) == 0xFF) &&                     \
1966   (((a)->u8[1]) == 0x02) &&                     \
1967   (((a)->u16[1]) == 0) &&                       \
1968   (((a)->u16[2]) == 0) &&                       \
1969   (((a)->u16[3]) == 0) &&                       \
1970   (((a)->u16[4]) == 0) &&                       \
1971   (((a)->u16[5]) == 1) &&                       \
1972   (((a)->u8[12]) == 0xFF))
1973
1974 /**
1975  * \briefput in b the solicited node address corresponding to address a
1976  * both a and b are of type uip_ipaddr_t*
1977  * */
1978 #define uip_create_solicited_node(a, b)    \
1979   (((b)->u8[0]) = 0xFF);                        \
1980   (((b)->u8[1]) = 0x02);                        \
1981   (((b)->u16[1]) = 0);                          \
1982   (((b)->u16[2]) = 0);                          \
1983   (((b)->u16[3]) = 0);                          \
1984   (((b)->u16[4]) = 0);                          \
1985   (((b)->u8[10]) = 0);                          \
1986   (((b)->u8[11]) = 0x01);                       \
1987   (((b)->u8[12]) = 0xFF);                       \
1988   (((b)->u8[13]) = ((a)->u8[13]));              \
1989   (((b)->u16[7]) = ((a)->u16[7]))
1990
1991 /**
1992  * \brief is addr (a) a link local unicast address, see RFC3513
1993  *  i.e. is (a) on prefix FE80::/10
1994  *  a is of type uip_ipaddr_t*
1995  */
1996 #define uip_is_addr_link_local(a) \
1997   ((((a)->u8[0]) == 0xFE) && \
1998   (((a)->u8[1]) == 0x80))
1999
2000 /**
2001  * \brief was addr (a) forged based on the mac address m
2002  * a type is uip_ipaddr_t
2003  * m type is uiplladdr_t
2004  */
2005 #if UIP_CONF_LL_802154
2006 #define uip_is_addr_mac_addr_based(a, m) \
2007   ((((a)->u8[8])  == (((m)->addr[0]) ^ 0x02)) &&   \
2008    (((a)->u8[9])  == (m)->addr[1]) &&            \
2009    (((a)->u8[10]) == (m)->addr[2]) &&            \
2010    (((a)->u8[11]) == (m)->addr[3]) &&            \
2011    (((a)->u8[12]) == (m)->addr[4]) &&            \
2012    (((a)->u8[13]) == (m)->addr[5]) &&            \
2013    (((a)->u8[14]) == (m)->addr[6]) &&            \
2014    (((a)->u8[15]) == (m)->addr[7]))
2015 #else
2016
2017 #define uip_is_addr_mac_addr_based(a, m) \
2018   ((((a)->u8[8])  == (((m)->addr[0]) | 0x02)) &&   \
2019    (((a)->u8[9])  == (m)->addr[1]) &&            \
2020    (((a)->u8[10]) == (m)->addr[2]) &&            \
2021    (((a)->u8[11]) == 0xff) &&            \
2022    (((a)->u8[12]) == 0xfe) &&            \
2023    (((a)->u8[13]) == (m)->addr[3]) &&            \
2024    (((a)->u8[14]) == (m)->addr[4]) &&            \
2025    (((a)->u8[15]) == (m)->addr[5]))
2026
2027 #endif /*UIP_CONF_LL_802154*/
2028
2029 /**
2030  * \brief is address a multicast address, see RFC 3513
2031  * a is of type uip_ipaddr_t*
2032  * */
2033 #define uip_is_addr_mcast(a)                    \
2034   (((a)->u8[0]) == 0xFF)
2035
2036 /**
2037  * \brief is group-id of multicast address a
2038  * the all nodes group-id
2039  */
2040 #define uip_is_mcast_group_id_all_nodes(a) \
2041   ((((a)->u16[1])  == 0) &&                 \
2042    (((a)->u16[2])  == 0) &&                 \
2043    (((a)->u16[3])  == 0) &&                 \
2044    (((a)->u16[4])  == 0) &&                 \
2045    (((a)->u16[5])  == 0) &&                 \
2046    (((a)->u16[6])  == 0) &&                 \
2047    (((a)->u8[14])  == 0) &&                 \
2048    (((a)->u8[15])  == 1))
2049
2050 /**
2051  * \brief is group-id of multicast address a
2052  * the all routers group-id
2053  */
2054 #define uip_is_mcast_group_id_all_routers(a) \
2055   ((((a)->u16[1])  == 0) &&                 \
2056    (((a)->u16[2])  == 0) &&                 \
2057    (((a)->u16[3])  == 0) &&                 \
2058    (((a)->u16[4])  == 0) &&                 \
2059    (((a)->u16[5])  == 0) &&                 \
2060    (((a)->u16[6])  == 0) &&                 \
2061    (((a)->u8[14])  == 0) &&                 \
2062    (((a)->u8[15])  == 2))
2063
2064
2065 #endif /*UIP_CONF_IPV6*/
2066
2067 /**
2068  * Calculate the Internet checksum over a buffer.
2069  *
2070  * The Internet checksum is the one's complement of the one's
2071  * complement sum of all 16-bit words in the buffer.
2072  *
2073  * See RFC1071.
2074  *
2075  * \param buf A pointer to the buffer over which the checksum is to be
2076  * computed.
2077  *
2078  * \param len The length of the buffer over which the checksum is to
2079  * be computed.
2080  *
2081  * \return The Internet checksum of the buffer.
2082  */
2083 u16_t uip_chksum(u16_t *buf, u16_t len);
2084
2085 /**
2086  * Calculate the IP header checksum of the packet header in uip_buf.
2087  *
2088  * The IP header checksum is the Internet checksum of the 20 bytes of
2089  * the IP header.
2090  *
2091  * \return The IP header checksum of the IP header in the uip_buf
2092  * buffer.
2093  */
2094 u16_t uip_ipchksum(void);
2095
2096 /**
2097  * Calculate the TCP checksum of the packet in uip_buf and uip_appdata.
2098  *
2099  * The TCP checksum is the Internet checksum of data contents of the
2100  * TCP segment, and a pseudo-header as defined in RFC793.
2101  *
2102  * \return The TCP checksum of the TCP segment in uip_buf and pointed
2103  * to by uip_appdata.
2104  */
2105 u16_t uip_tcpchksum(void);
2106
2107 /**
2108  * Calculate the UDP checksum of the packet in uip_buf and uip_appdata.
2109  *
2110  * The UDP checksum is the Internet checksum of data contents of the
2111  * UDP segment, and a pseudo-header as defined in RFC768.
2112  *
2113  * \return The UDP checksum of the UDP segment in uip_buf and pointed
2114  * to by uip_appdata.
2115  */
2116 u16_t uip_udpchksum(void);
2117
2118 /**
2119  * Calculate the ICMP checksum of the packet in uip_buf.
2120  *
2121  * \return The ICMP checksum of the ICMP packet in uip_buf
2122  */
2123 u16_t uip_icmp6chksum(void);
2124
2125
2126 #endif /* __UIP_H__ */
2127
2128
2129 /** @} */