3 * This file contains special DoxyGen information for the generation of the main page and other special
4 * documentation pages. It is not a project source file.
7 /** \mainpage Mass Storage Host Demo
9 * \section SSec_Info USB Information:
11 * The following table gives a rundown of the USB utilization of this demo.
15 * <td><b>USB Mode:</b></td>
19 * <td><b>USB Class:</b></td>
20 * <td>Mass Storage Device</td>
23 * <td><b>USB Subclass:</b></td>
27 * <td><b>Relevant Standards:</b></td>
28 * <td>USBIF Mass Storage Standard</td>
29 * <td>USB Bulk-Only Transport Standard</td>
30 * <td>SCSI Primary Commands Specification</td>
31 * <td>SCSI Block Commands Specification</td>
34 * <td><b>Usable Speeds:</b></td>
35 * <td>Full Speed Mode</td>
39 * \section SSec_Description Project Description:
41 * Mass Storage host demonstration application. This gives a simple reference
42 * application for implementing a USB Mass Storage host, for USB storage devices
43 * using the standard Mass Storage USB profile.
45 * The first 512 bytes (boot sector) of an attached disk's memory will be dumped
46 * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
47 * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
48 * of the disk will be dumped to the serial port.
50 * \section SSec_Options Project Options
52 * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.